50559239 Salient Characteristics Shaft Roller.pdf
PDF 135 KB Posted
- Attached to
- DRIVER TURNING ROLL Federal contract opportunity
- Solicitation number
- SPMYM225Q2460
About this file
This document is a Joint Manufacturing Listing (JML) for Positioning Rollers for the Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS&IMF). The requirement is for one (1) set of positioning rollers with specific technical specifications, including a drive roller weighing 2,100 pounds (74" X 25" X 28") and an idler roller weighing 1,150 pounds (64" X 25" X 28"). The rollers must meet extensive technical requirements, such as operational in 50°F-95°F environments, fully rated for 90,000-pound weight capacity, capable of handling shaft diameters from 7 to 40 inches, and equipped with specific electrical and mechanical features like NEMA 12 dust-tight electricals and AC variable frequency drive.
The contractor must provide three sets of Commercial Off-The-Shelf (COTS) manuals, electrical schematics, Bill of Materials, and instructional/maintenance documentation. The equipment must comply with various safety and regulatory standards, including 29 CFR 1910, NFPA 70, and NFPA 79, with certification by a National Recognized Testing Laboratory (NRTL). Delivery is specified to the Puget Sound Naval Shipyard Receiving Officer at 1400 Farragut Ave, Bremerton, WA, with the delivery address required to include the specific JML number (50559239-50559240). Power requirements are 480 VAC, 3 Phase, 60 Hz, and the rollers must have specific marking and nameplate requirements.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| AMENDED SOLICITATION SPMYM225Q2460.pdf | ||
| 50559239 SOW 45 Ton Shaft Rollers.pdf | ||
| SOLICITATION SPMYM225Q2460.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
JML 50559239-50559240
ICN: 993168NNMP H01
JML: 50559239-50559240
SALIENT CHARACTERISTICS:
Item: Positioning Rollers 1 EA Required Dimensions and required specs:
Machine Dimensions:
Drive roller weight is 2,100 pounds and is 74” X 25” X 28”.
Idler roller weight is 1,150 pounds and is 64” X 25” X 28”.
Machine Specifications:
Requirements, the rollers shall have meet the following criteria:, Rollers, Fully operational in ambient environment ranging from 50°F - 95°F., All words on instruments, control panels, and plates shall be in the English language, Use U.S. units of measure., Rollers shall be fully rated for 90,000 pound weight capacity. , Rollers will have a single wheel adjustment., Rollers will be able to handle shaft diameters from 7 to 40 inches., Rollers will have a single center set diameter of 23 inches., Drive roller wheels will be driven through a gearbox., Drive motor will be fully enclosed and meet the requirements of NEMA MG 1., Drive rollers will have a speed range infinitely variable over the entire range of 0.84 to 42 IPM wheel speed., Roller wheels will be on fully welded assemblies., Roller will have solid axles., Each Roller will have a least two (2) Anti-friction bearings., Roller wheels will have a minimum temperature rating of at least 150 degree Fahrenheit, Roller wheels will have a minimum hardness of URETHANE 55 SHORE 'D' Durometer, Roller wheels will have tires made of urethane material., Drive roller will have NEMA 12 dust-tight electricals with main power disconnect switch., Drive roller will have rotation axis with AC Variable frequency drive., Drive roller will have a 20 foot remote dust tight pendant with 24V controls and E-STOP., Power requirement: 480 VAC 3 Ph, 60 Hz., Deliverables:
Markings: The following signs, labels, placards and certifications will be placed on the machine in an accessible and readable location. All words shall be in the English language. Characters shall be engraved, etched, embossed, or stamped in boldface on a contrasting background. All plates shall be corrosion resistant. OHA Compliance certification by National Recognized Testing Laboratory (NRTL).
The equipment installation and its component parts shall be in compliance with 29 CFR 1910, NFPA 70 and NFPA 79. Approval shall be as specified under the “Approval” and “Acceptance” criteria in the OSHA regulations Subpart “O”, Machinery and Machine Guarding paragraph 1910.212 and Subpart “S” Electrical, paragraph 1910.303 and paragraph 1910.399. UL508A is an acceptable standard. Safety signs and labels in accordance with NEMA Z535.4 shall be securely attached to the equipment in visible locations, at the point of hazard(s), with any safety precautions to be observed by the operator or maintenance personnel permanently marked on the signs. A lubrication plate shall be permanently and securely attached to the machine. The plate shall contain the following information: Points of lubricant application, Servicing interval, Type of lubricant, Viscosity, Military or Federal Specification for each lubricant (If applicable), Size and type of each lubricant filter, A nameplate shall be permanently and securely attached to the machine. The nameplate shall contain the information listed below. If the machine is a special model, the model designation shall include the model number of the basic standard machine and a suffix identified in the manufacturer's permanent records., Nomenclature, Manufacturer's name, Manufacturer's model designation, Manufacturer's serial number, Power input (volts, total amps, phase and frequency), Contract Number or Order Number, Date of manufacture, Transportation & Utility Connection, Contractor shall be responsible to ship rollers to PSNS&IMF from their facility.
JML 50559239-50559240
Documentation, Three (3) each Sets COTS Commercial Off-The Self Manuals and Associated Supplemental Data. Three (3) each Sets Contractor shall provide electrical schematic. Three (3) each Sets Contractor shall provide Bill of Materials for maintenance and replacement of parts. Three (3) each Sets Contractor shall provide instructional and maintenance manual/s. Examination: The machine shall be examined to determine compliance with all requirements of this specification. Delivery address: The "Ship/Deliver to" address on the Bill of Lading (B/L) should include the JML number as shown below.
Puget Sound Naval Shipyard & IMF Receiving Officer PSNS, N4523A Bldg. 514, JML-50559239-50559240 1400 Farragut Ave. Bremerton, WA 98314-5001
| Markings: The following signs, labels, placards and certifications will be placed on the machine in an accessible and readable location. All words shall be in the English language. Characters shall be engraved, etched, embossed, or stamped in boldfac... |
| 1400 Farragut Ave. Bremerton, WA 98314-5001 |
File details come from the government source that posted it. Updated .