5-RFB 4443 - Attachment A.pdf

TRUCI\. CHASSlS

2026 MODEL WITH STAND UP RH DRIVE AND SIT DOWN LH DRIVE

SPECIFICATION PROPOSAL

Descriotion

Price Level

M2 PRL-18M (EFF:04/17/18)

Data Version

SPECPRO21 DATA RELEASE VER 017

Vehicle Configuration

General Service

M2 106 CONVENTIONAL CHASSIS

2026 MODEL YEAR SPECIFIED

SET BACK AXLE - TRUCK

STRAIGHT TRUCK PROVISION

MUST BE EQUIPPED FOR LH PRIMARY

STEERING AND RH STAND UP

SECONDARY STEERING. VENDOR SHALL

PROVIDE ALL CONTROLS AND GAGES PEDALS

STEERING WHEEL AND FOLD UP SEAT FOR

SECOND LOCATION TRUCK MODIFICATIONS

-.SPECS.

DOMICILED, USA 50 STATES (INCLUDING

CALIFORNIA AND CARB OPT-IN STATES)

REFUSE SERVICE

GOVERNMENT BUSINESS SEGMENT

MOIST BULK COMMODITY

TERRAIN/DUTY: 100% (ALL) OF THE TIME, IN

TRANSIT, IS SPENT ON PAVED ROADS

MAXIMUM 8% EXPECTED GRADE

SMOOTH CONCRETE OR ASPHALT PAVEMENT -

MOST SEVERE IN-TRANSIT (BETWEEN SITES)

ROAD SURFACE

MEDIUM TRUCK WARRANTY

EXPECTED FRONT AXLE(S) LOAD: 12000.0 lbs

Application Version 10.1.105 Data Version PRL-18M.017 Owensboro RH Steer

YES NO

08/23/2018 5:35 PM

Adjustable steenng cohJmn not required.

Exterior grab handles on the light sfde are not required.

Afr myers required, but do NOT have to be mounted under cab Installed supplied Regen light in RH side duster.

- Nole: top of cab In enby is approx 86"- City of Owensboro requhes optfonat step.

Motfdicatton includes:

1 ff {400 mrn)right hand steering wheel Right-hand contrms and Instrumentation:

Fonialne right hand dash module with:

Speedometer. dual a1r pressure gauge. tum signal fights.

haZard lights, ABS warning light, and high beam indicator fuel JeveJ gauge

._ Odom�Read out not required.

- Metric Primary not required.

- LCD Dispfay m Upfitter Supplled ICU Ouster does NOT have to function.

- Foot throttle, Foot brake

SelH:aRCelllng tum signal switch wilh Integral emergency ffasher and hi beam switches Headlight switch. Center mounted Ignition switch Beclric horn buUon Right-hand side bi-fold door.

Right-hand side jump seat with three-point seat belts and door opening belt right side pedal rover Right-hand side grip black rubberfloorgrating

- TmtedwinooNS Grab handle mounted left of the Jump seat

Exhaust restrictions::

Exhaust data rodes are limited ID the following options:

016-1C8; UI VerocaJ AlS wilh lH Vertical Tailpipe 016-1FB: RH Horizontal OPR with RH Holizontal SCR

01&--1F7: RH Horizontaf DPFwllH Horizontal SCR 016-101: RH lnboam frame mounted horizontal afterlreatment assembly wlth hori:wntal tail p1pe

Chassis Movement Codes:

,_ALL FOREIGN BUILDS WILL REOUJRE ADDffiONAL

1RANSPORTA110N SERVICES

Yes No RH STEERING u.CAB COLOR k. 00739531EB BLUE ELI1E BC .,.,, 106"'/108" cab with flat dash Must come wih Power Mirrors Power windows not required

882-018 Auto neulra1 wodc brake

6TS-001 SOOK SINGLE CONNECTOR-CENTER OF DASH

OEM Hood Mirror

._CORRECT MIRRORS INSTALLED FOR BODY APPLICATION

..... 996-050314 Clean tdJe Sticker Code Needed"-

Allison automatic hansmission with push button· shift Air brakes

Must specify a left-hand single seat 76Q.998 Omit passenger seat -Axed Co!umn Onfy..., Requires optional left--hand fuel lank Restrictions:

No right-hand under cab batteries if batteries are frame mounted, right side, mount at least 24• from BOC Data code 206-998 No right-hand fuet tank Cab suspension must be hydramount.or air, NO spring mount

Yes No

002 CMCV

133120-30-0001 Rev 000

HEATER-AUX. SURD PASSENGER

U/MEA

fnsiatf 15000 BTU/hr Auxiilary Heater dedicated to RH Stand Up Aoor area.

Yes NQ

N

Truck Service

Engine

Description

EXPECTED GROSS VEHICLE WEIGHT CAPACITY

: 35000.0 lbs

EXPECTED GROSS COMBINATION WEIGHT: 0.0

lbs

REFUSE, SIDE LOAD OR REAR PACKER BODY -

UNLOADS IN A LANDFILL

EXPECTED TRUCK BODY LENGTH: 16.0 ft

MUNICIPAL EQUIPMENT

EXPECTED BODY/PAYLOAD CG HEIGHT ABOVE

FRAME "XX" INCHES : 32.0 in

CUMMINS L9 300 HP @ 2000 RPM, 2200 GOV

RPM, 860 LB/FT @ 1300 RPM

Electronic Parameters

72 MPH ROAD SPEED LIMIT

CRUISE CONTROL SPEED LIMIT SAME AS ROAD

SPEED LIMIT

PTO MODE ENGINE RPM LIMIT-1400 RPM

PTO MODE BRAKE OVERRIDE - SERVICE

BRAKE APPLIED

PTO RPM WITH CRUISE SET SWITCH-700 RPM

PTO RPM WITH CRUISE RESUME SWITCH - 1300

RPM

PTO MODE CANCEL VEHICLE SPEED -5 MPH

PTO GOVERNOR RAMP RA TE - 100 RPM PER

SECOND

FUEL DOSING OF AFTERTREATMENT ENABLED

IN PTO MODE-CLEANS HYDROCARBONS AT

HIGH TEMPERATURES ONLY

ONE REMOTE PTO SPEED

PTO SPEED 1 SETTING-1300 RPM

PTO MINIMUM RPM - 700

REGEN INHIBIT SPEED THRESHOLD - 0 MPH

Engine Equipment

2016 ONBOARD DIAGNOSTICS/2010

EPA/CARS/FINAL GHG 17 CONFIGURATION

2008 CARS EMISSION CERTIFICATION - CLEAN

IDLE (INCLUDES 6X4 INCH LABEL ON LOWER

FORWARD CORNER OF DRIVER DOOR)

STANDARD OIL PAN

ENGINE MOUNTED OIL CHECK AND FILL

ONE PIECE VALVE COVER

SIDE OF HOOD AIR INTAKE WITH FIREWALL

MOUNTED DONALDSON AIR CLEANER

YES NO

Transmission

Description

CUMMINS SPIN ON FUEL FILTER COMBINATION

FULL FLOW/BYPASS OIL FILTER

900 SQUARE INCH ALUMINUM RADIATOR

ANTIFREEZE TO -34F, OAT (NITRITE AND SILICATE

FREE) EXTENDED LIFE COOLANT

GATES BLUE STRIPE COOLANT HOSES OR

EQUIVALENT

CONSTANT TENSION HOSE CLAMPS FOR

COOLANT HOSES

RADIATOR DRAIN VALVE

LOWER RADIATOR GUARD

PHILLIPS-TEMRO 1000 WATT/115 VOLT BLOCK

HEATER

BLACK PLASTIC ENGINE HEATER RECEPTACLE

MOUNTED UNDER LH DOOR

ALUMINUM FLYWHEEL HOUSING

ELECTRIC GRID AIR INTAKE WARMER

DELCO 12V 39MT HD/OCP STARTER WITH

THERMAL PROTECTION AND INTEGRATED

MAGNETIC SWITCH

ALLISON 3500 RDS AUTOMATIC TRANSMISSION

WITH PTO PROVISION

Transmission Equipment

ALLISON VOCATIONAL PACKAGE 168-

AVAILABLE ON 3000/4000 PRODUCT FAMILIES

WITH VOCATIONAL MODEL RDS

ALLISON VOCATIONAL RATING FOR REFUSE

APPLICATIONS AVAILABLE WITH ALL PRODUCT

FAMILIES

PRIMARY MODE GEARS, LOWEST GEAR 1,

START GEAR 1, HIGHEST GEAR 6, AVAILABLE

FOR 3000/4000 PRODUCT FAMILIES ONLY

SECONDARY MODE GEARS, LOWEST GEAR 1,

START GEAR 1, HIGHEST GEAR 6, AVAILABLE

FOR 3000/4000 PRODUCT FAMILIES ONLY

PRIMARY SHIFT SCHEDULE RECOMMENDED BY

DTNA AND ALLISON, THIS DEFINED BY ENGINE

AND VOCATIONAL USAGE

SECONDARY SHIFT SCHEDULE

RECOMMENDED BY DTNA AND ALLISON, THIS

DEFINED BY ENGINE AND VOCATIONAL USAGE

PRIMARY SHIFT SPEED RECOMMENDED BY

DTNA AND ALLISON, THIS DEFINED BY ENGINE

AND VOCATIONAL USAGE

SECONDARY SHIFT SPEED RECOMMENDED BY

DTNA AND ALLISON, THIS DEFINED BY ENGINE

AND VOCATIONAL USAGE

ENGINE BRAKE RANGE PRESELECT

RECOMMENDED BY DTNA AND ALLISON, THIS

DEFINED BY ENGINE AND VOCATIONAL USAGE

ENGINE BRAKE RANGE ALTERNATE

PRESELECT RECOMMENDED BY DTNA AND

ALLISON, THIS DEFINED BY ENGINE AND

VOCATIONAL USAGE

LOAD BASED SHIFT SCHEDULE AND VEHICLE

ACCELERATION CONTROL RECOMMENDED BY

DTNA AND ALLISON, THIS DEFINED

VOCATIONAL USAGE

NEUTRAL AT STOP - DISABLED, FUELSENSE -

DISABLED

DRIVER SWITCH INPUT - DEFAULT - NO

SWITCHES

DIRECTION CHANGE ENABLED WITH

MULTIPLEXED SERVICE BRAKES - ALLISON 5TH

GEN TRANSMISSIONS

VEHICLE INTERFACE WIRING CONNECTOR

WITHOUT BLUNT CUTS, AT BACK OF CAB

ELECTRONIC TRANSMISSION CUSTOMER

ACCESS CONNECTOR MOUNTED BACK OF CAB

INSTALLED CHELSEA 277 SERIES PTO

PTO MOUNTING, LH SIDE OF MAIN

TRANSMISSION

MAGNETIC PLUGS, ENGINE DRAIN,

TRANSMISSION DRAIN, AXLE(S) FILL AND DRAIN

PUSH BUTTON ELECTRONIC SHIFT CONTROL,

DASH MOUNTED

TRANSMISSION PROGNOSTICS - ENABLED 2013

WATER TO OIL TRANSMISSION COOLER, IN

RADIATOR END TANK

TRANSMISSION OIL CHECK AND FILL WITH

ELECTRONIC OIL LEVEL CHECK

SYNTHETIC TRANSMISSION FLUID (TES-295

COMPLIANT)

Front Axle and Equipment

DETROIT DA-F-12.0-3 12,000# FF1 71.5 KPl/3.74

DROP SINGLE FRONT AXLE

MERITO.R 16.5X5 Q+ CAST SPIDER CAM FRONT

BRAKES, DOUBLE ANCHOR, FABRICATED

SHOES

NON-ASBESTOS FRONT BRAKE LINING

CONMET CAST IRON FRONT BRAKE DRUMS

FRONT BRAKE DUST SHIELDS

FRONT OIL SEALS

VENTED FRONT HUB CAPS WITH WINDOW,

CENTER AND SIDE PLUGS - OIL

Chassis Equipment

Fuel Tanks

Tires

Description

CALCULATED FRAME SPACE LH SIDE: 148.84

in

CALCULATED FRAME SPACE RH SIDE: 148.28

in

SQUARE END OF FRAME

FRONT CLOSING CROSSMEMBER

STANDARD WEIGHT ENGINE CROSSMEMBER

STANDARD CROSSMEMBER BACK OF

TRANSMISSION

STANDARD MIDSHIP #1 CROSSMEMBER(S)

STANDARD REARMOST CROSSMEMBER

STANDARD SUSPENSION CROSSMEMBER

THREE-PIECE 14 INCH CHROMED STEEL

BUMPER WITH COLLAPSIBLE ENDS

FRONT TOW HOOKS - FRAME MOUNTED

BUMPER MOUNTING FOR SINGLE LICENSE

PLATE

FENDER AND FRONT OF HOOD MOUNTED

FRONT MUDFLAPS

GRADE 8 THREADED HEX HEADED FRAME

FASTENERS

50 GALLON/189 LITER SHORT RECTANGULAR

ALUMINUM FUEL TANK - LH

RECTANGULAR FUEL TANK(S)

PLAIN ALUMINUM/PAINTED STEEL

FUEUHYORAULIC TANK(S) WITH PAINTED

BANDS

FUEL TANK(S) FORWARD

PLAIN STEP FINISH

FUEL TANK CAP(S)

DETROIT FUEUWATER SEPARATOR WITH

WATER IN FUEL SENSOR AND 12 VOLT

PREHEATER

EQUIFLO INBOARD FUEL SYSTEM

NO NATURAL GAS VEHICLE FUEL TANK VENT

LINE/STACK

HIGH TEMPERATURE REINFORCED NYLON

FUEL LINE

HANKOOK AL11 11R22.5 14 PLY RADIAL FRONT

TIRES (NO EXCEPTION ON TIRE SIZE ONLY)

HAN KOOK DL 11 11 R22 .5 14 PLY RADIAL REAR

TIRES (NO EXCEPTION ON TIRE SIZE ONLY)

Wheels

Cab Exterior

Description

CONMET PRESET PLUS PREMIUM IRON FRONT

HUBS

CONMET PRESET PLUS PREMIUM IRON REAR

HUBS

MAXION WHEELS 90262 22.5X8.25 10-HUB PILOT

6.19 INSET 5-HAND STEEL DISC FRONT

WHEELS

MAXION WHEELS 90262 22.5X8.25 10-HUB PILOT

5-HAND STEEL DISC REAR WHEELS

FRONT WHEEL MOUNTING NUTS

REAR WHEEL MOUNTING NUTS

106 INCH BBC FLAT ROOF ALUMINUM

CONVENTIONAL CAB

AIR CAB MOUNTING

NONREMOVABLE BUGSCREEN MOUNTED

BEHIND GRILLE

LH AND RH GRAB HANDLES

HOOD MOUNTED CHROMED PLASTIC GRILLE

CHROME HOOD MOUNTED AIR INTAKE GRILLE

FIBERGLASS HOOD

SINGLE 14 INCH ROUND POLISHED AIR HORN

ROOF MOUNTED

SINGLE ELECTRIC HORN

SINGLE HORN SHIELD

DOOR LOCKS AND IGNITION SWITCH KEYED

THE SAME

REAR LICENSE PLATE MOUNT END OF FRAME

INTEGRAL HEADLIGHT/MARKER ASSEMBLY

WITH CHROME BEZEL

LED AERODYNAMIC MARKER LIGHTS

INTEGRAL STOP/TAIUBACKUP LIGHTS

STANDARD FRONT TURN SIGNAL LAMPS

DUAL WEST COAST BRIGHT FINISH HEATED

MIRRORS WITH LH AND RH REMOTE

DOOR MOUNTED MIRRORS

102 INCH EQUIPMENT WIDTH

LH AND RH 8 INCH BRIGHT FINISH CONVEX

MIRRORS MOUNTED UNDER PRIMARY

MIRRORS

RH DOWN VIEW MIRROR

LH AND RH BRIGHT FINISH CROSS VIEW

COMPLIANT HOOD MOUNTED CONVEX

MIRRORS WITH SWl'1G ARM MOUNTING

Hubs

Cab Interior

Description

STANDARD SIDE/REAR REFLECTORS

63X14 INCH TINTED REAR WINDOW

TINTED DOOR GLASS LH AND RH WITH TINTED

NON-OPERATING WING WINDOWS

RH AND LH ELECTRIC POWERED WINDOWS

TINTED WINDSHIELD

2 GALLON WINDSHIELD WASHER RESERVOIR

WITHOUT FLUID LEVEL INDICATOR, FRAME

MOUNTED

OPAL GRAY VINYL INTERIOR

MOLDED PLASTIC DOOR PANEL

MOLDED PLASTIC DOOR PANEL

BLACK MATS WITH SINGLE INSULATION

DASH MOUNTED ASH TRAYS AND LIGHTER

FORWARD ROOF MOUNTED CONSOLE WITH

UPPER STORAGE COMPARTMENTS WITHOUT

NETTING

IN DASH STORAGE BIN

(2) CUP HOLDERS LH AND RH DASH

GRAY/CHARCOAL FLAT DASH

SMART SWITCH EXPANSION MODULE HEATER,

DEFROSTER AND AIR CONDITIONER STANDARD

HVAC DUCTING

MAIN HVAC CONTROLS WITH RECIRCULATION

SWITCH

STANDARD HEATER PLUMBING

DENSO HEAVY DUTY AIR CONDITIONER

COMPRESSOR

BINARY CONTROL, R-134A

STANDARD INSULATION

SOLID-STATE CIRCUIT PROTECTION AND FUSES

12V NEGATIVE GROUND ELECTRICAL SYSTEM

DOME LIGHT WITH 3-WAY SWITCH ACTIVATED BY

LH AND RH DOORS

LH AND RH ELECTRIC DOOR LOCKS NOT required

(1) 12 VOLT POWER SUPPLY IN DASH

BASIC HIGH BACK AIR SUSPENSION DRIVER

SEAT WITH MECHANICAL LUMBAR AND

INTEGRATED CUSHION EXTENSION

NO FRONT PASSENGER SEAT

INBOARD DRIVER SEAT ARMREST, NO

PASSENGER SEAT ARMREST

LH AND RH INTEGRAL DOOR PANEL ARMRESTS

BLACK CLOTH MATERIAL DRIVER SEAT

HIGH VISIBILITY ORANGE SEAT BEL TS

FIXED STEERING COLUMN

4-SPOKE 18 INCH (450MM) LH AND

CONVERSION COMPANY SUPPLIED 3-SPOKE 16

INCH (400 MM) RH STEERING WHEELS

DRIVER AND PASSENGER INTERIOR SUN

VISORS

Instruments & Controls

GRAY DRIVER INSTRUMENT PANEL

GRAY CENTER INSTRUMENT PANEL

ENGINE REMOTE INTERFACE WITH PARK

BRAKE AND NEUTRAL INTERLOCKS

BLACK GAUGE BEZELS

LOW AIR PRESSURE INDICATOR LIGHT AND

AUDIBLE ALARM

2 INCH PRIMARY AND SECONDARY AIR

PRESSURE GAUGES

INTAKE MOUNTED AIR RESTRICTION

INDICATOR WITHOUT GRADUATIONS

97 DB BACKUP ALARM

ELECTRONIC CRUISE CONTROL WITH

SWITCHES IN LH SWITCH PANEL

KEY OPERATED IGNITION SWITCH AND

INTEGRAL START POSITION; 4 POSITION

OFF/RUN/START/ACCESSORY

MANUAL REMOTE ENGINE STOP/START WITH

PTO RE-ENGAGE

ICU3S, 132X48 DISPLAY WITH DIAGNOSTICS, 28

LED WARNING LAMPS AND DATA LINKED

HEAVY DUTY ONBOARD DIAGNOSTICS

INTERFACE CONNECTOR LOCATED BELOW LH

DASH

2 INCH ELECTRIC FUEL GAUGE

ENGINE REMOTE INTERFACE WITH PRESET

FAST IDLE

ENGINE REMOTE INTERFACE CONNECTOR AT

BACK OF CAB

ELECTRICAL ENGINE COOLANT TEMPERATURE

GAUGE

2 INCH TRANSMISSION OIL TEMPERATURE

GAUGE

ENGINE AND TRIP HOUR METERS INTEGRAL

WITHIN DRIVER DISPLAY

(1) DASH MOUNTED PTO SWITCH WITH

INDICATOR LAMP - PARK BRAKE AND NEUTRAL

INTERLOCK FOR CUSTOMER INSTALLED PTO

ELECTRIC ENGINE OIL PRESSURE GAUGE

Design

Color

DASH MOUNTED RADIO

(2) RADIO SPEAKERS IN CAB

AM/FM ANTENNA MOUNTED ON FORWARD LH

ROOF

ELECTRONIC MPH SPEEDOMETER WITH

SECONDARY KPH SCALE, WITHOUT

ODOMETER

STANDARD VEHICLE SPEED SENSOR

ELECTRONIC 3000 RPM TACHOMETER

IGNITION SWITCH CONTROLLED ENGINE STOP

(6) IGN CONTROLLED EXTRA SWITCHES WITH

IND LIGHTS WIRED TO POWER DIST BOX WITH

RELAYS PROVIDING 20 AMPS PER CIRCUIT TO

JUNCTION BLOCK AND 1 CIRCUIT AT 30 AMPS

PRE-TRIP LAMP INSPECTION, ALL OUTPUTS

FLASH, WITH SMART SWITCH

WORK BRAKE WITH RETURN TO GEAR, AUTO

NEUTRAL, FOR DRIVE AXLE SERVICE BRAKES

DIGITAL VOLTAGE DISPLAY INTEGRAL WITH

DRIVER DISPLAY

SINGLE ELECTRIC WINDSHIELD WIPER MOTOR

WITH DELAY

MARKER LIGHT SWITCH INTEGRAL WITH

HEADLIGHT SWITCH

ONE VALVE PARKING BRAKE SYSTEM WITH

DASH VALVE CONTROL AUTONEUTRAL AND

WARNING INDICATOR

SELF CANCELING TURN SIGNAL SWITCH WITH

DIMMER, WASHER/WIPER AND HAZARD IN

HANDLE

INTEGRAL ELECTRONIC TURN SIGNAL

FLASHER WITH HAZARD LAMPS OVERRIDING

STOP LAMPS

PAINT: ONE SOLID COLOR

CAB COLOR A: 00739531 EB BLUE

ELITE BC

BLACK, HIGH SOLIDS POLYURETHANE CHASSIS

PAINT

POWDER WHITE (N0006EA) FRONT

WHEELS/RIMS (PKWHT21, TKWHT21, W, TW)

POWDER WHITE (N0006EA) REAR

WHEELS/RIMS (PKWHT21, TKWHT21, W, TW)

STANDARD E COAT/UNDERCOATING

AM/FM/WB WORLD TUNER RADIO

Certification / Compliance

U.S. FMVSS CERTIFICATION, EXCEPT SALES

CABS AND GLIDER KITS

Extended Warranty

TOWING: 1 YEAR/UNLIMITED MILES/KM EXTENDED TOWING COVERAGE

$550 CAP FEX APPLIES

SEE ATTACHED FOR FURTHER WARRANTY REQUIREMENTS.

Extended Wa_rranty

TOWING: 1 YEAR/UNLIMITED MILES/KM EXTENDED TOWING

COVERAGE $550 CAP FEX APPLIES

5 YR/ 250 000 MILES THAT COVERS THE ENGINE INCLUDING

SCR ASSEMBLY/ DECOMPOSITION REACTOR

MID-BED AMMONIA SENSOR/ DPF ASSEMBLY/ FUEL PUMP

AIR COMPRESSOR/ SELECT ENGINE SENSORS/ TURBO

FUEL INJECTORS/ FLYWHEEL/ WIRING HARNESS

FRONT GEAR HOUSING/ THERMOSTAT/ WATER PUMP

EGR COOLER ,EGR VALVE, EGR MIXER

CYLINDER HEAD ASSEMBLY/ ECM

PISTONS, RINGS AND LINERS

LUBE OIL COOLER ASSEMBLY

CYLINDER BLOCK ASSEMBLY/ CRANKSHAFT ASSEMBLY

FRONT GEAR COVER/ OIL PAN

CONNECTING ROD ASSEMBLY/ LUBE PUMP ASSEMBLY

CAMSHAFT ASSEMBLY AND BUSHINGS / BRAKE HOUSING

BUSHINGS/ ROCKER LEVERS/ ROLLER PIN/ CROSSHEAD PIN

CROSSHEAD, INCLUDING MOUNTING HARDWARE AND GASKETS

ENGINE CYLINDER BLOCK CASTING I ENGINE MAIN BEARING BOLTS

ENGINE CYLINDER HEAD CASTING

ENGINE CYLINDER HEAD CAPSCREWS

ENGINE CRANKSHAFT FORGING/ ENGINE CAMSHAFT FORGING

CAM FOLLOWER HOUSING/ CAM FOLLOWER ASSEMBLIES

ENGINE CONNECTING RODS AND CAPS

ENGINE CONNECTING ROD BOLTS/ INTAKE MANIFOLD CASTINGS

ROCKER LEVER HOUSINGS/ ROCKER LEVER ASSEMBLY

GEAR TRAIN GEARS

5 YR 300 000 WARRANTY ON AFTERTREATMENT SYSTEM

5 YR / 750 000 WARRANTY ON TRANSMISSION

DIMENSIONS

.,,_ _____ 234 f·n------....,1< 04 in>

41.74 in

,,__ _______ 330;,,: -------41

JI

Model ............................................................................................................................................. ......................................... M2106

Wheelbase (545) .......................................................................................................................... 5950MM (234 INCH) WHEELBASE

Rear Frame Overhang (552) .................................................................................... 1625MM (64 INCH) REAR FRAME OVERHANG

Fifth Wheel (578) ................................................................................................................................................... NO FIFTH WHEEL

Mounting Location (577) ................................................................................................................ NO FIFTH WHEEL LOCATION

Maximum Forward Position (in)

Maximum Rearward Position (in)

Amount of Slide Travel (in)

Slide Increment (in) ..................................................................................................................................................................... O

Desired Slide Position (in) ........................................................................................................................................................ 0.0

Cab Size (829) ................................................................. ............. 106 INCH BBC FLAT ROOF ALUMINUM CONVENTIONAL CAB

Sleeper (682) ............................................................................................................................... NO SLEEPER BOX/SLEEPERCAB

Exhaust System (016) ............ RH INBOARD FRAME MOUNTED HORIZONTAL AFTERTREATMENT SYSTEM ASSEMBLY WITH

HORIZONTAL TAILPIPE

Bumper to Back of Cat: (BBC) Bumper to Centerline or Front t..�le 1e;J I.Jin. Cao to Bodi Clearance (CB) Back of Cab to Centerline of Rear .A.xte(s) (CA.)

Effedive Back of Cab to Centerline of Rear A.xte(s) (Effectr.;e CA.)

Back of Cab Protrusions (Exhauslllntake) (CP;

Back of Cab Protrusions {Side ExtendersfTrim Tao) (CPJ Bacf: or Call Protrusions iCNG Tani<}

Back of Cab Clearance (Cl) Back or Cab to End or Frame Cab Height (CH}

Wheelbase (WB) Frame Overhang (OH) o-,erall Length (OAL)

Rear .AJ!le Spacing Unladen Frame Height at Centerline of Rear Axle

106 3

JO?

168.4 1'35.:

O:>

3.0

232.4

6? 5 23.: 0, 6-1.0 338?

0.0 41.7

Meets Specifications:

SCOPE

SPECIFICATIONS FOR 23 CUBIC YARD SIDE LOADER

DUAL - SIDE LOADING. SEMI-AUTOMATED, FULL EJECT

YES NO

This specification describes a truck mounted, hydraulic refuse packer. This machine must be equipped with loading mechanisms on both the curb and street sides of the material receiving hopper near the front of the body. Body must be designed so that optimum load distribution can be achieved when installed on a 33,000-38,000 G.V.W. truck cab and chassis.

Body installation shall not require modification to a standard truck chassis forward of the rear suspension. (NO DROP FRAME)

Meets Specifications:

I. BODY

II.

A. CAPACITY

1 . The body shall have a usable capacity of twenty three (23) cubic yards including the tailgate.

B. DIMENSIONS

1. Body length - 233" -(including bustle tailgate).

2. Overall height above chassis -102" -(bin in "down" position).

3. Overall height above chassis -MUST NOT EXCEED 112" -

4. (bin in full "up" position).

5. Overall body width with loading buckets down -102"

CONSTRUCTION

1. The body floor shall be constructed of 1 /4" HARDOX 450 steel plate.

2. The body floor shall have 6" x 10.5 lbs. /ft. structural channel long -members.

3. Body sides shall be curved shell style, eleven (11) gauge single sheet of HARDOX 450 steel sheet.

4. Body roof shall be curved shell style, eleven (11) gauge single sheet HARDOX 450 steel sheet.

6. All external welds shall be continuous.

TAILGATE

A. CAPACITY

1. The tailgate shall have a usable capacity of 6.30 cubic yards minimum.

Body Specifications

Meets Specifications:

E. PLUMBING

All body and lift plumbing not requiring flexibility to complete its function must be constructed of seamless steel hydraulic tubing correctly sized for each operation. Plumbing requiring hoses shall be routed in such a way as to prevent rubbing, chafing and undue bending.

YES NO

VIII. IN-CAB CONTROLS

The following controls must be mounted inside the truck cab for safe and convenient operation.

1. Hydraulic system on/off switch.

2. Body tailgate control.

3. Body ejector control.

4. Work light and strobe light switches.

IX. LIGHTS

1. Standard lights shall be supplied in accordance with FMVSS#108.

2. All body lights - TRUCKLITE Model "SUPER 44" L.E.D. with

SERIES 50 wiring harness.

3. Both street side and curbside loading locations must have work lights.

4. Peterson Smart Light Pkg (4) Rear (2) Front

X. ACCESSORIES

1. Federal under-ride bumper shall be installed.

2. Tailgate safety prop shall be provided.

3. Body "up" and tailgate "unlock" alarm shall be provided.

4. Back up alarm shall be provided.

5. Both body and hopper shall have access doors on each side for cleaning behind the packer and ejector panels. Doors must be sealed when closed.

6. Tool box mounted on frame.

7. Dual camera system Quad Monitor

XI. PAINTING PROCEDURES

1. The body and lift shall be free of all weld slag, dirt and grease and be prepared prior to painting in accordance with the paint manufacturers specifications.

2. Body and loading mechanism shall receive at least one coat of primer and one finish coat of polyurethane enamel. Primer shall be approved for use with the finish coat material.

3. Shall be painted Owensboro Blue

XII. WARRANTY

1. A minimum one-year warranty against manufacturing defects shall be provided by the manufacturer. Submit any extended warranty options & cost ___ _