5-IFB Grease Trap Water Oil Separator.pdf
PDF 233 KB Posted
- Solicitation number
- ML26100726
- Issued by
- Utah
About this file
This Invitation for Bid (IFB) document, issued by Davis Technical College in Utah, solicits qualified contractors to provide grease trap and oil/water separator maintenance services on the college's campus. The scope of work encompasses pumping, cleaning, inspection, transportation, and disposal services for one grease trap and seven oil/water separators located throughout the facility. The grease trap (M4-G1) requires quarterly service with an estimated frequency of four service visits annually, while the seven oil/water separators require annual service with one estimated visit per unit per year. A mandatory pre-bid walkthrough is scheduled for December 2, 2026, at 2:00 PM MST at Davis Technical College, 550 E 300 S, Kaysville, Utah, with attendance required for bid eligibility. The resulting contract will be a five-year agreement with the College reserving the right to reject any or all bids and proceed only if determined in its best interest.
Pricing shall be submitted on a per-service-visit basis for each asset, with bid evaluation based on the anticipated total cost for the initial three-year term using estimated service frequencies. All prices must include labor, equipment, vehicles, mobilization, transportation, disposal, insurance, permits, and incidentals. Prices are firm for the initial three-year period, with price adjustments after year three limited to five percent and subject to submission within a 60-to-120-day window prior to the anniversary date. Bidders must demonstrate at least three years of relevant experience, provide three professional references from the past five years, and possess all required federal, state, and local licenses and permits. The contractor must maintain general liability insurance of no less than $1,000,000 per occurrence and $3,000,000 aggregate, with Davis Technical College named as an additional insured, and provide proof of workers' compensation insurance. Invoices must reference the applicable purchase order number and be submitted in PDF format to ap@davistech.edu, with payment issued within thirty days of receipt of a complete and compliant invoice and all required documentation.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DAVIS TECH IFB ML26100726
On-Demand Grease Trap & Oil/Water Separator Services
Section 1.0 Purpose
The purpose of this IFB is to find a qualified contractor capable of providing grease trap and oil/water separator pumping, cleaning, inspection, transportation, and disposal services for Davis Technical College. Services shall support the College's facilities and maintenance operations through routine servicing of one (1) grease trap and seven (7) oil/water separators located on the Davis Technical College campus.
THE COLLEGE DOES NOT GUARANTEE TO SPEND ANY AMOUNT UNDER THE
CONTRACT THAT MAY BE AWARDED BY THIS IFB. After reviewing submitted bids, the College reserves the right to determine whether it is in the best interest of the College to proceed with the procurement.
Section 1.01 Contract Term
The College anticipates entering into a five (5) year Agreement for grease trap and oil/water separator pumping, cleaning, inspection, transportation, and disposal services.
Bidders shall provide pricing for the services identified in Attachment B - Scope of Work.
Section 2.0 General Requirements
Mandatory Pre-Bid Walkthrough
December 2, 2026 @ 2:00 PM MST Davis Technical College 550 E 300 S Kaysville, UT 84037 Main Building Rotunda
Attendance at the Mandatory Pre-Bid Walkthrough is required. Only vendors that attend the Mandatory Pre-Bid Walkthrough will be eligible to submit a bid and be considered for award.
A campus map identifying the location of each grease trap and oil/water separator asset included in this solicitation will be provided during the walkthrough. Asset locations will be identified using the following Davis Technical College asset numbering system:
[Location Identifier]-[Asset Type and Asset Number]
• M = Main Building
• BC = Barlow Compound
• Numeric values following the location identifier represent a room number, area, or specific campus location.
• G = Grease Trap
• S = Oil/Water Separator
Example asset identifiers include M4-G1, BC1-S1, M1408-S2, and M2-S7.
2.01
Contractor must be able to fulfill all services as outlined in Attachment B – Scope of Work and agree to all Terms and Conditions in:
• Attachment A – State of Utah Standard Terms and Conditions
• Attachment C – Davis Tech Payment Terms and Conditions
• Attachment – Davis Tech PO Terms and Conditions
2.02
Contractor must be capable of providing all services required under this Agreement as the Prime Contractor.
2.03
Contractor must have at least three (3) years of experience providing grease trap pumping, grease interceptor maintenance, oil/water separator pumping, wastewater collection, or similar services comparable in size and scope to those described in Attachment B. Contractor shall provide examples demonstrating relevant experience and quality of work.
2.04
Contractor must provide at least three (3) references, including organization name, contact person, and telephone number, for clients for whom similar services have been performed within the last five (5) years.
2.05
Contractor shall possess all licenses, permits, registrations, and qualifications required by federal, state, and local authorities to perform the services described herein, including transportation and disposal of collected waste materials. Documentation may be requested during the bid evaluation process or at any time during the term of the resulting Agreement.
Section 3.0 Evaluation and Award
3.01 Evaluation Process Overview
All bids submitted in response to this IFB will be evaluated in a manner consistent with the Utah Procurement Code and all applicable rules, policies, and procedures governing procurement activities at Davis Technical College.
The evaluation process will consist of the following steps:
A. Responsive Determination – See Section 3.02
B. Responsible Determination – See Section 3.03
C. Technical Evaluation – See Section 3.04
D. Cost Evaluation – See Section 3.06
3.02 Responsive Determination
Bids will be reviewed to confirm that they conform to the requirements outlined in this IFB.
Non-responsive bids, defined as bids that do not materially conform to IFB requirements, may be rejected and eliminated from further consideration.
A bid may also be rejected if it is determined to be conditional, incomplete, or otherwise non-compliant with the requirements of this solicitation.
3.03 Responsible Determination
In determining whether a bidder is responsible, the College may evaluate factors including, (but not limited to) financial resources; relevant experience; organizational capacity; technical qualifications;
available personnel and equipment resources; record of past performance; integrity and business practices; quality of references provided; ability to perform successfully under the terms and conditions of the Agreement.
The College may also consider whether any adversarial relationship exists between the bidder and the College that is so serious and compelling that it may negatively impact the performance of work under this IFB, or any other condition determined to affect the bidder's responsibility.
3.04 Technical Evaluation
Bids that meet the requirements for responsiveness and responsibility will proceed to technical evaluation.
Technical evaluation will assess the bidder's demonstrated ability to meet the requirements outlined in Attachment B – Scope of Work, including qualifications, relevant experience, staffing, and demonstrated understanding of grease trap and oil/water separator pumping, cleaning, inspection, transportation, and disposal services.
Davis Technical College reserves the right to request additional information or clarification from bidders to confirm their ability to meet the requirements outlined in this IFB.
3.05 Technical Bid Evaluation Criteria
Technical bids will be evaluated in accordance with the following criteria:
The Contractor's ability to demonstrate capability to meet the requirements of the Scope of Work.
Contractor shall provide qualifications and years of experience for management staff, technicians, and support personnel responsible for performing services under this Agreement.
Contractors should include any licenses, permits, certifications, training, or industry credentials demonstrating technician competency and compliance with applicable environmental, transportation, safety, and industry requirements.
3.06 Cost Evaluation
Bid pricing will be evaluated for all bids that successfully pass the technical evaluation.
For evaluation purposes, the College will calculate the anticipated total cost of services for the initial three (3) year term of the Agreement using the unit pricing submitted in the Contractor's fee schedule.
The anticipated total cost of services will be calculated by multiplying the Contractor's submitted unit price for each asset by the estimated annual service frequency identified in Attachment B – Scope of Work and multiplying the resulting annual cost by three (3) years.
For evaluation purposes, the College currently anticipates four (4) service visits annually for the grease trap asset identified as M4-G1 and one (1) service visit annually for each of the seven (7) oil/water separator assets identified in Attachment B – Scope of Work.
These frequencies are estimates only and are used solely for bid evaluation purposes.
Bids will be ranked based on the calculated anticipated total cost of services for the initial three (3) year term of the Agreement.
3.07 Award of Contract
Upon completion of the evaluation process, the College may award a contract to the bidder whose bid is determined to represent the lowest cost responsive and responsible bid meeting the specifications and evaluation criteria outlined in this IFB.
The College reserves the right to reject any or all bids, waive minor informalities or technicalities, or cancel this IFB if such action is determined to be in the best interest of the College.
The College may choose to award contracts to multiple bidders if doing so is determined to be in the best interest of the College.
Purchasing Services is the only department authorized to award a procurement contract on behalf of the College.
Any contract resulting from this IFB will include, but not be limited to:
1. State of Utah Standard Terms and Conditions
2. The College's Purchase Order Contract Terms and Conditions
3. Attachment B – Scope of Work
4. The applicable conditions and requirements outlined in this IFB
All pertinent College policies and State of Utah laws and regulations shall apply.
ATTACHMENT B
SCOPE OF WORK
Grease Trap and Oil/Water Separator Assets and Service Frequency
The Contractor shall provide pumping, cleaning, inspection, transportation, and disposal services for the following grease trap and oil/water separator systems located on the Davis Technical College campus:
Asset ID Asset Description Service Frequency
M4-G1 Grease Trap Quarterly Service
BC1-S1 Oil/Water Separator Annual Service
M1408-S2 Oil/Water Separator Annual Service
M1408-S3 Oil/Water Separator Annual Service
M1405-S4 Oil/Water Separator Annual Service
M1405-S5 Oil/Water Separator Annual Service
M1308-S6 Oil/Water Separator Annual Service
M2-S7 Oil/Water Separator Annual Service
Each service shall include pumping, removal of accumulated waste materials, inspection of accessible components, transportation, and disposal of collected materials in accordance with all applicable federal, state, and local laws, regulations, and permitting requirements.
Estimated Annual Service Frequency
For planning purposes, the College currently anticipates:
• Grease Trap Service: Four (4) service visits annually
• Campus-Wide Oil/Water Separator Service: One (1) service visit annually
These frequencies are estimates only and do not constitute a guarantee of actual service requirements. No guarantee of actual quantities, service volumes, or frequency of services is expressed or implied. Service requirements shall be based upon actual operational needs as determined by the College.
The College reserves the right to increase, decrease, add, or eliminate services during the term of the Agreement based upon operational, maintenance, regulatory, or budgetary considerations.
Historical service records indicate that the combined quantity of material removed from the grease trap and oil/water separators during a typical annual service cycle has generally been less than 4,000 gallons.
This information is provided solely for informational purposes and shall not be relied upon as a representation, warranty, or guarantee of actual quantities that may be encountered during the term of the Agreement.
Scope of Services
Each service visit shall include, at a minimum:
1. Pumping and removal of accumulated grease, oil, sludge, wastewater, sediment, and debris from the applicable unit(s).
2. Removal of residual accumulations from accessible portions of the unit(s) necessary to maintain operational capacity and facilitate visual inspection.
3. Inspection of accessible components for observable deficiencies or conditions affecting operation.
4. Transportation and lawful disposal of all collected materials.
5. Restoration of all covers, lids, and access points to their original condition following service completion.
6. Cleanup of any waste, debris, or materials generated during performance of the services.
The Contractor shall provide all labor, equipment, vehicles, materials, supervision, transportation, permits, and incidentals necessary to perform the services described in this Agreement.
Access, Equipment, Staffing, and Site Protection
Prior to commencing any service activities, the Contractor shall adequately prepare the work area to prevent damage to College property.
The Contractor shall protect adjacent surfaces, landscaping, pavement, equipment, structures, utilities, and other property that may be affected by service operations.
Appropriate containment methods shall be utilized to prevent spills, leaks, tracking, or migration of waste materials onto College property.
Upon completion of services, all work areas shall be left in a clean condition free of waste materials, residue, equipment, and debris.
The Contractor shall provide all labor, tools, materials, vehicles, pumps, hoses, vacuum equipment, and other equipment necessary to perform services under this Agreement.
The College may provide access credentials as necessary for authorized access to designated service locations.
The Contractor shall ensure all personnel performing work on College property are properly trained, qualified, licensed, and supervised.
Scheduling and Work Hours
Services shall be scheduled a minimum of seven (7) days in advance and coordinated with the Contract Administrator.
No services shall be performed without prior approval from the College.
The Contractor shall perform all work during College-approved service windows unless otherwise authorized by the College.
The Contractor shall ensure that all work is completed in a manner that minimizes disruption to College operations.
Safety and OSHA Compliance
The Contractor shall be solely responsible for the safety of its employees, agents, subcontractors, equipment, vehicles, materials, and work practices used during performance of the Agreement.
Contractor shall comply with all applicable federal, state, and local safety laws and regulations, including all OSHA requirements.
Waste Handling, Disposal, and Environmental Compliance
All grease, oil, wastewater, sludge, sediment, debris, and other waste materials removed during performance of services shall be properly contained, collected, transported, and disposed of by the Contractor in accordance with all applicable federal, state, and local laws and regulations.
Under no circumstances shall waste materials removed during performance of the work be discharged, deposited, or disposed of on College property.
Inspection and Documentation
The Contractor shall be fully responsible for inspection, documentation, and reporting associated with services performed under this Agreement.
The Contractor shall provide a written service report following each service visit.
Service reports shall include:
1. Date of service
2. Identification of each serviced asset by its assigned College asset number
3. Description of services performed and quantity pumped
4. Observed deficiencies or maintenance concerns
5. Recommendations regarding future service frequency or additional maintenance needs
All service reports shall be submitted to the College within five (5) business days following completion of services.
Insurance Requirements
The Contractor shall provide Davis Technical College with a certificate of general liability insurance for no less than $1,000,000 per occurrence and $3,000,000 aggregate listing Davis Technical College as an additional insured.
This insurance must be maintained for the life of the Agreement.
Contractor shall provide Davis Technical College with proof of Worker's Compensation Insurance coverage as required by applicable law.
General Pricing and Costs
Prices stated in the Contractor's bid shall include all costs associated with performance of the services specified in this Agreement, including but not limited to labor, supervision, equipment, vehicles, mobilization, transportation, fuel, travel, tools, materials, disposal of waste materials, insurance, permits, and all other incidental or related costs necessary to perform the services described in this Agreement.
All prices and fees shall be stated in U.S. dollars.
Davis Technical College is exempt from sales, use, and federal excise taxes.
Price Guarantee and Adjustments
Prices stated are firm for the initial three (3) year term of this Agreement.
After the initial three-year term, price adjustments may be made; however, any request for a price adjustment must be made in writing no more than one hundred twenty (120) days and no less than sixty
(60) days prior to the anniversary date of the original Agreement execution date to be considered.
Requests submitted outside the approved submission window will not be considered.
After completion of the initial three (3) years, any approved increase shall not exceed five percent (5%).
Pricing Schedule
Service Category Unit of Measure Unit Price
M4-G1 Grease Trap Service Per Service Visit $____________
BC1-S1 Oil/Water Separator Service Per Service Visit $____________
M1408-S2 Oil/Water Separator Service Per Service Visit $____________
M1408-S3 Oil/Water Separator Service Per Service Visit $____________
M1405-S4 Oil/Water Separator Service Per Service Visit $____________
M1405-S5 Oil/Water Separator Service Per Service Visit $____________
M1308-S6 Oil/Water Separator Service Per Service Visit $____________
M2-S7 Oil/Water Separator Service Per Service Visit $____________
INVOICING AND PAYMENT
The College shall issue a purchase order prior to performance of any services under this Agreement.
Services performed without a valid, College-issued purchase order may not be authorized for payment.
Contractor shall submit invoices referencing the applicable purchase order number.
Invoices shall be submitted in PDF format to:
ap@davistech.edu
Condition Precedent to Payment
All required documentation identified in this Scope of Work shall be submitted to the College within the specified timeframes.
Failure to provide required documentation may result in a delay of payment and may be considered non-performance under the Agreement.
The College shall remit payment within net thirty (30) days following receipt of a complete and compliant invoice and all required documentation.
File details come from the government source that posted it. Updated .