5. Ceiling Tiles and Wood Siding Specifications.pdf

US Department of Agriculture (USDA)

2026 ANF SUPERVISOR'S OFFICE STORM DAMAGE REPAIRS

SPECIFICATIONS AND EXHIBITS

Contents Angeles NF Supervisors Office Acoustic Ceiling Tiles Specification Angeles NF Supervisor's Office Acoustic Ceiling Tiles Exhibits

Angeles NF Supervisor's Office Exterior Wood Specifications

**CONTRACTOR TO VERIFY THAT THE INFORMATION PROVIDED BELOW WILL

MATCH EXISTING CEILING TILES INSTALLED AT THE ANF SUPERVISOR'S OFFICE.

FILE WAS PROVIDED AS A REFERENCE, WHICH WAS FOUND IN THE PREVIOUS

CONSTRUCTION CONTRACT OF THE SUPERVISOR'S OFFICE. **

javierdiaz Callout Law Enforcement Offices: prior request for access will need to be granted before any ceiling tile replacement is completed for this area.

javierdiaz Polygon javierdiaz Polygon javierdiaz Polygon javierdiaz Polygon javierdiaz Polygon javierdiaz Polygon javierdiaz Rectangle javierdiaz Typewritten Text Areas Needing Acoustic Ceiling Tiles Replacement

Polygon

Polygon

Redwood Lumber Patterns No. 17

3 REDWOOD GRADEMARKS

3 PATTERNS PROFILED IN THIS BOOK

3 SURFACE TEXTURE

3 GRAIN

3 CONVERSION FACTORS

3 FURTHER INFORMATION

4 S4S DRY DIMENSIONS

4 S4S GREEN DIMENSIONS

4 DESCRIPTION OF ABBREVIATIONS

5-9 TABLE OF CONTENTS

Redwood Patterns

10-12 TONGUE AND GROOVE

13 NAILING TONGUE & GROOVE PATTERNS

14-15 SHIPLAP

16 NAILING SHIPLAP PATTERNS

17-19 BEVEL

20 NAILING BEVEL PATTERNS

21 DECKING

22 PLOWED FASCIA

23 FENCING

24 MOULDING

25-26 INDEX

California Redwood Association 405 Enfrente Drive, Suite 200 Novato, California 94949-7201 Telephone 415 382-0662 Toll Free 888 Cal-Redwood Fax 415 382-8531 www.calredwood.org

Redwood—our renewable resource

1/04

**CONTRACTOR TO VERIFY THAT THE

INFORMATION PROVIDED BELOW WILL

MATCH EXISTING CEILING TILES INSTALLED

AT THE ANF SUPERVISOR'S OFFICE.

FILE WAS PROVIDED AS A REFERENCE,

WHICH WAS FOUND IN THE PREVIOUS

CONSTRUCTION CONTRACT OF THE

SUPERVISOR'S OFFICE. **

CRA Member Companies and General Redwood Sales Offices

Britt Lumber Company, Inc.

P.O. Box 248 Arcata, California 95518-0248 Phone 707 822-1779

FAX 707 822-5645

Redwood Fencing Experts P.O. Box 1134 Arcata, CA 95518-1134 Phone 707 822-4384

FAX 707 822-2195

Mendocino Forest Products Company, LLC 420 Aviation Blvd. #103 Santa Rosa, CA 95403 Phone 707 576-8240 Fax 707 576-8259 www.mrc.com

P.O. Box 565 Scotia, California 95565-0565 Phone 707 764-8888

FAX 707 764-4444

www.palco.com

Schmidbauer Lumber Company P.O. Box 152 Eureka, California 95502-0152 Phone 707 443-7024

FAX 707 443-2356

Simpson Timber Company P.O. Box 1089 Arcata, California 95518-1089 Phone 800-637-7077

FAX 707 268-3089

www.simpsoncalifornia.com

Listed on this page are the member mills of the California Redwood Association. Individually, each member has earned a distinguished reputation for excellence in the production of redwood lumber products. Combined under the CRA hallmark, they continuously seek improvements in the processing and utilization of redwood. Thus, the CRA signature on redwood lumber assures that it has been manu-factured to the highest quality standards.

REDWOOD GRADEMARKS

Redwood grades and patterns are established by the Redwood Inspection Service which is the official redwood grading agency accredited by the American Lumber Standard Committee, Inc., Board of Review. Grade rules are published in the Standard Specifications for Grades of California Redwood Lumber.

Properly grademarked lumber will bear the RIS mark or that of another accredited inspection bureau. The CRA trademark is on products of the member mills of the California Redwood Association only and is an additional assurance of quality.

Standard grademarks include the grade designation and the symbol of an authorized grading agency. They shall also identify the manufacturer and the moisture content at the time of manufacture. Grademarks may appear on the face, edge or end of a piece.

Lumber that has been kiln dried according to accepted standards includes the words “Certified Kiln Dried” or the initials “CKD” in the grademark.

In some cases, an RIS Certificate of Inspection may be used to identify the lumber grade.

Certificates of Inspection include all the pertinent information described above as well as the name of the producer and the inspector.

PATTERNS PROFILED IN THIS BOOK

Illustrated on the following pages are the pattern profiles of worked redwood lumber produced by the members of the California Redwood Association.

These profiles and dimensions have been established to simplify the specifying and ordering of pattern lumber.

All patterns shown are pictured as they are usually run through the matcher as viewed from the head of the machine looking toward the outfeed end.

SURFACE TEXTURE

Pattern lumber—lumber shaped to a pattern or moulded form—is supplied surfaced (smooth planed) or saw-textured. Many products are produced surfaced one side and saw-textured one side. This surface is derived from resawing at the planer mill and is not to be confused with the surface of rough lumber (the initial product manufactured at the headrig in a sawmill).

Saw-textured surfaces are preferable for many applications because they hold finishes better and show blemishes less.

GRAIN

Redwood sidings are sold as vertical grain (VG), flat grain (FG) or mixed grain (MG). The annual growth rings in vertical grain lumber form an angle of 45 degrees or more with the surface of the piece. All lumber not meeting this requirement is known as flat grain.

Vertical grain lumber has superior performance qualities in the areas of dimensional stability and finish-holding characteristics.

CONVERSION FACTORS

Conversion factors for siding, paneling, decking and fencing patterns are based on surface measure and must be doubled to calculate board measure for 2-inch lumber patterns. To estimate surface measure, multiply the area to be covered (in square feet) by the con-version factor. This factor allows for width lost in dressing or lapping. Add three to five percent for end cutting and matching on the job.

FURTHER INFORMATION

The California Redwood Association publishes a wide variety of publications relating to redwood products.

Contact the Association for product, technical and pro-motional information or go to www.calredwood.org to view and download literature that is of interest to you.

Grade rules for redwood:

Standard Specifications for Grades of

California Redwood Lumber

Specifying redwood:

Redwood Grades & Uses Redwood Architectural Guide Redwood Landscape Architecture

Applying redwood:

Redwood CKD Siding Patterns and Applications Redwood Deck Construction

Finishing redwood:

Redwood Exterior Finishes Redwood Interior Finishes Painting Redwood Siding: Guidelines to Extending

Maintenance Cycles

Annual rings Bark side Pith side

MILL 000

CERTIFIED

KILN DRIED

CLR RWD® ®

Vertical Grain Flat Grain

L U M B E R mmad river

PATTERN

NUMBER DESCRIPTION PAGE

16 1x6 T&G Paneling (S2S-CM) 10

17 1x8 T&G Paneling (S2S-CM) 10

18 1x10 T&G Paneling (S2S-CM) 10

204 5/8x 4 T&G (V1S-S2S) 3/32"V 10

205 5/8x6 T&G (V1S-S2S) 3/32"V 10

206 5/8 x 8 T&G (V1S-S2S) 3/32"V 10

606 1x6 T&G Drop Siding (S2S) 10

616 1x6 T&G V&CV (S2S) 1/4"V 10

617 1x8 T&G V&CV (S2S) 1/4"V 10

632 1x4 T&G (S2S-CM) 11

632EE 1x4 T&G EE (S2S-CM) 11

633 1x6 T&G (S2S-CM) 11

633EE 1x6 T&G EE (S2S-CM) 11

634 1x8 T&G (S2S-CM) 11

634EE 1x8 T&G EE (S2S-CM) 11

707 1x4 T&G (V1S-S2S) 3/32"V 11

707R 1x4 T&G (V2S-S1S-Saw-textured 1S) 3/32"V 11

708 1x6 T&G (V1S-S2S) 3/32"V 11

708R 1x6 T&G (V2S-S1S-Saw-textured 1S) 3⁄32"V 11

709 1x4 T&G (V1S-S2S) 1⁄4"V 12

709R 1x4 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

PATTERN

NUMBER DESCRIPTION PAGE

711 1x6 T&G (V1S-S2S) 1⁄4"V 12

711R 1x6 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

712 1x8 T&G (V1S-S2S) 1⁄4"V 12

712R 1x8 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

713 1x10 T&G (V1S-S2S) 1⁄4"V 12 713R 1x10 T&G (V2S-S1S-Saw-textured 1S)

1⁄4"V 12

715 1x8 T&G (V1S-S2S) 3⁄32"V 11

715R 1x8 T&G (V2S-S1S-Saw-textured 1S) 3⁄32"V 11

716 1x10 T&G (V1S-S2S) 3⁄32"V 11

716R 1x10 T&G (V2S-S1S-Saw-textured 1S) 3⁄32"V 11

726R 1x6 T&G (V2S-S1S-Saw-textured 1S) 1⁄8"V 12

727R 1x8 T&G (V2S-S1S-Saw-textured 1S) 1⁄8"V 12

728R 1x10 T&G (V2S-S1S-Saw-textured 1S) 1⁄8"V 12

732R 1x4 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

733R 1x6 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

734R 1x8 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

REDWOOD

TONGUE AND GROOVE

PATTERNS

DESCRIPTION OF ABBREVIATIONS

T&G = TONGUE & GROOVE.

S1S = SURFACED ONE SIDE.

S1S2E = SURFACED ONE SIDE TWO EDGES.

S2S = SURFACED TWO SIDES.

S4S = SURFACED FOUR SIDES.

EE = EASED EDGE (ROUNDED).

CM = CENTER MATCHED (TONGUE & GROOVE ARE EQUAL

DISTANCE FROM BOTH SIDES).

V1S = VEE EDGES—ONE SIDE.

V2S = VEE EDGES—BOTH SIDES.

V&CV = VEE EDGES—AND CENTER VEE.

R = REVERSIBLE PATTERN (S1S-Saw-Textured 1S).

SAW-TEXTURED (SEE SURFACE TEXTURE—PAGE 3).

NOTE: LUMBER LESS THAN 2 INCHES THICK IS NORMALLY

ROUNDED AS NEAR AS POSSIBLE TO A 1⁄16-INCH RADIUS,

2-INCH LUMBER TO A 1/8-INCH RADIUS. S4S LUMBER MAY

BE RUN EASED EDGE OR SQUARE EDGE AT MILL OPTION

UNLESS OTHERWISE SPECIFIED.

S4S DRY DIMENSIONS

(INCHES)

Nominal Dressed1 Nominal Dressed Nominal Dressed

1x2 11⁄16 x 11⁄2* 11⁄4x2 1x11⁄2* 2x2 11⁄2x11⁄2* 1x3 11⁄16 x21⁄2** 11⁄4x3 1x21⁄2** 2x3 11⁄2x21⁄2** 1x4 11⁄16 x31⁄2 11⁄4x4 1x31⁄2 2x4 11⁄2x31⁄2 1x6 11⁄16 x51⁄2 11⁄4x6 1x51⁄2 2x6 11⁄2x51⁄2 1x8 11⁄16 x71⁄4 11⁄4x8 1x71⁄4 2x8 11⁄2x71⁄4 1x10 11⁄16 x91⁄4 11⁄4x10 1x9 1⁄4 2x10 11⁄2x91⁄4 1x12 11⁄16 x111⁄4 11⁄4x12 1x111⁄4 2x12 11⁄2x111⁄4

*Also available surfaced at 15⁄8 inch net.

**Also available surfaced at 25⁄8 inch net.

MOST SIZES AVAILABLE S1S2E SAW-TEXTURED ONE SIDE2

S4S GREEN DIMENSIONS

(INCHES)

Nominal Dressed1 Nominal Dressed Nominal Dressed

1x2 25⁄32 x19⁄16 11⁄4x2 11⁄32 x19⁄16 2x2 19⁄16 x19⁄16

1x3 25⁄32 x2 9⁄16 11⁄4x3 11⁄32 x2 9⁄16 2x3 19⁄16 x29⁄16

1x4 25⁄32 x3 9⁄16 11⁄4x4 11⁄32 x3 9⁄16 2x4 19⁄16 x39⁄16

1x6 25⁄32 x5 9⁄16 11⁄4x6 11⁄32 x5 9⁄16 2x6 19⁄16 x5 9⁄16

1x8 25⁄32 x73⁄8 11⁄4x8 11⁄32 x73⁄8 2x8 19⁄16 x73⁄8 1x10 25⁄32 x93⁄8 11⁄4x10 11⁄32 x93⁄8 2x10 19⁄16 x93⁄8 1x12 25⁄32 x113⁄8 11⁄4x12 11⁄32 x113⁄8 2x12 19⁄16 x113⁄8

MOST SIZES AVAILABLE S1S2E SAW-TEXTURED ONE SIDE2

1 Boards less than the minimum thickness for nominal 1 inch but 5/8 inch or greater thickness dry (11/16 inch green) shall be regarded as American Softwood Lumber Standard (ALS) lumber, but such boards shall be marked to show the size and condition of seasoning at the time of dressing. They shall also be distinguished from nominal 1-inch boards on invoices and certificates.

2 Variation resulting from resawing surfaced redwood lumber may be plus or minus 1/32 inch.

320R 1⁄2x4 Plain Saw-textured Bevel Siding (S1S2E) 17

321R 1⁄2x5 Plain Saw-textured Bevel Siding (S1S2E) 17

322R 1⁄2x6 Plain Saw-textured Bevel Siding (S1S2E) 17

323R 1⁄2x8 Plain Saw-textured Bevel Siding (S1S2E) 17

329R 3⁄4x6 Plain Saw-textured Bevel Siding (S1S2E) 17

330R 3⁄4x8 Plain Saw-textured Bevel Siding (S1S2E) 17

331R 3⁄4x10 Plain Saw-textured Bevel Siding (S1S2E) 17

360 1⁄2x4 Rabbeted Bevel Siding (S1S2E) 17

362 1⁄2x6 Rabbeted Bevel Siding (S1S2E) 17

363 1⁄2x8 Rabbeted Bevel Siding (S1S2E) 17

371 3⁄4x6 Rabbeted Bevel Siding (S1S2E) 17

372 3⁄4x8 Rabbeted Bevel Siding (S1S2E) 17

373 3⁄4x10 Rabbeted Bevel Siding (S1S2E) 17

PATTERN

NUMBER DESCRIPTION PAGE

391 3⁄4x6 Rabbeted Saw-textured Bevel Siding (S1S2E) 18

392 3⁄4x8 Rabbeted Saw-textured Bevel Siding (S1S2E) 18

393 3⁄4x10 Rabbeted Saw-textured Bevel Siding (S1S2E) 18

400 1⁄2x4 Rabbeted Bevel Siding Round Edge (S1S2E) 18

422 11⁄4x6 Plain Saw-textured Bevel Siding (S1S2E) 18

423 11⁄4x8 Plain Saw-textured Bevel Siding (S1S2E) 18

424 11⁄4x10 Plain Saw-textured Bevel Siding (S1S2E) 18

430 1x6 2 LAP (Round Edge) Drop Siding (S1S2E) 19

431 1x8 2 LAP (Round Edge) Drop Siding (S1S2E) 19

433 1x10 3 LAP (Round Edge) Drop Siding (S1S2E) 19

476 11⁄4x6 Rabbeted Saw-textured Bevel Siding (S1S2E) 19

477 11⁄4x8 Rabbeted Saw-textured Bevel Siding (S1S2E) 19

PATTERN

NUMBER DESCRIPTION PAGE

761 1x6 Shiplap (S2S) 14

762 1x8 Shiplap (S2S) 14

763 1x10 Shiplap (S2S) 14

770 1x6 Cove Shiplap (S2S) 14

771 1x8 Cove Shiplap (S2S) 14

772 1x10 Cove Shiplap (S2S) 14

773 1x10 Channel Shiplap (S2S) Beveled Channel 14

774 1x6 Channel Shiplap (S2S) Square Channel 14

775 1x8 Channel Shiplap (S2S) Square Channel 14

776 1x10 Channel Shiplap (S2S) Square Channel 14

784R 1x6 Channel V&CV Shiplap (S1S-Saw-textured 1S) 1⁄4"V 15

PATTERN

NUMBER DESCRIPTION PAGE

785R 1x8 Channel V&CV Shiplap (S1S-Saw-textured 1S) 1⁄4"V 15

786R 1x10 Channel V&CV Shiplap (S1S-Saw-textured 1S) 1⁄4"V 15

793 1x6 V Shiplap (S2S) 1⁄4"V 15

793R 1x6 V Shiplap (V2S-S1S-Saw-textured 1S) 1⁄4"V 15

794 1x8 V Shiplap (S2S) 1⁄4"V 15

794R 1x8 V Shiplap (V2S-S1S-Saw-textured 1S) 1⁄4"V 15

795 1x10 V Shiplap (S2S) 1⁄4"V 15

795R 1x10 V Shiplap (V2S-S1S-Saw-textured 1S) 1⁄4"V 15

810 1x6 Boston Shiplap (S2S) 15

811 1x8 Boston Shiplap (S2S) 15

812 1x10 Boston Shiplap (S2S) 15

REDWOOD

BEVEL

PATTERNS

REDWOOD

SHIPLAP

PATTERNS

482 2x6 T&G Decking (S2S-CM) 21 484 2x8 T&G Decking (S2S-CM) 21 486 2x6 T&G Decking (V1S-S2S) 1⁄4"V 21

PATTERN

NUMBER DESCRIPTION PAGE

487 2x8 T&G Decking (V1S-S2S) 1⁄4"V 21 488 2x10 T&G Decking (V1S-S2S) 1⁄4"V 21 489 2x12 T&G Decking (V1S-S2S) 1⁄4"V 21

PATTERN

NUMBER DESCRIPTION PAGE

28 1x6 Fencing (S2S) 23 29 1x8 Fencing (S2S) 23

PATTERN

NUMBER DESCRIPTION PAGE

30 1x6 Fencing (S2S) 23 31 1x8 Fencing (S2S) 23

REDWOOD

FENCING

PATTERNS

PATTERN

NUMBER DESCRIPTION PAGE

75 11⁄16x15⁄8 Bed Mould 24 105 11⁄16x11⁄16 Quarter Round Mould 24 175 11⁄16x2 Brick Mould 24 176 11⁄16x15⁄8 Brick Mould 24 180 11⁄4x2 Brick Mould 24 208 11⁄16x21⁄4 Panel Mould 24 210 11⁄16x15⁄8 Panel Mould 24 236EE 11⁄2x11⁄2 Panel Mould 24

PATTERN

NUMBER DESCRIPTION PAGE

266 5⁄16x15⁄8 Lattice 24 267 5⁄16x15⁄16 Lattice 24 268 5⁄16x11⁄16 Lattice 24 558 5⁄16x21⁄2 Flat Batten 24 559 11⁄16x15⁄8 O.G. Batten 24 560 11⁄16x21⁄4 O.G. Batten 24 712 9⁄16x31⁄2 Base Mould 24 862 11⁄16x21⁄2 Garage Door Stop 24 863 11⁄16x21⁄4 Garage Door Stop 24

REDWOOD

MOULDING

PATTERNS

REDWOOD

DECKING

PATTERNS

REDWOOD

PLOWED FASCIA

PATTERNS

PATTERN

NUMBER DESCRIPTION PAGE

80 1x6 Single Plow EE 22 81 1x8 Single Plow EE 22 84 1x6 Single Plow EE 22

PATTERN

NUMBER DESCRIPTION PAGE

85 1x8 Single Plow EE 22 88 1x6 Double Plow EE 22 89 1x8 Double Plow EE 22

REDWOOD TONGUE & GROOVE PATTERNS

B A

9/16" *

11/64"

7/32"

11/64"

7/32"3/16"

3/32" 3/32"

3/16"

5/8" T&G (V1S-S2S) 3/32"V

B A

11/16"

3/16"

9/32"

7/32"

9/32"1/4"

1/4"

3/16"

1/4" 1 1/4"

1 1/8" R

1" T&G DROP SIDING (S2S)

C C B 1/2"

A

11/16" 9/32"

5/32" 1/16"

1/4"

1/4" 3/16"

1/4" 1/4"

1" T&G V&CV (S2S) 1/4"V

1/4"

5/32" 5/32" 3/32"

B A

11/16"

13/64"

9/32" 9/32"

13/64"5/32" 3/64"

3/16"

1/4"

7/32"

1/4"1/32" 5/16" 5/8"R

1" T&G PANELING (S2S-CM)

3/16"13/16"

3/32"

5/16" 3/16"1/8" 1/8"

3/16"

3/16"

3/16"

9/32"

7/32"

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x6 16 53⁄8 51⁄8 1.18

1x8 17 71⁄8 67⁄8 1.17

1x10 18 91⁄8 87⁄8 1.13

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

5⁄8x4 204 33⁄8 33⁄16 1.26 5⁄8x6 205 53⁄8 53⁄16 1.16 5⁄8x8 206 71⁄8 615⁄16 1.16

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x6 606 53⁄8 51⁄8 1.17

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B C FACTOR

1x6 616 53⁄8 51⁄8 21⁄16 1.17

1x8 617 71⁄8 67⁄8 215⁄16 1.16

REDWOOD TONGUE & GROOVE PATTERNS

*Also available surfaced at 7⁄16''.

B A

11/16"

13/64"

9/32"

13/64"

9/32"

7/32"

1/4"

7/32"

1/4"

1" T&G (S2S-CM)

B A

11/16"

13/64"

9/32"

13/64"

9/32"

7/32"

3/32"

1/4"

7/32"

1/4"

1" T&G (V1S-S2S) 3/32"V

B A

11/16"

13/64"

9/32"

13/64"

9/32"

7/32"

1/4"

7/32"

1/4"

1" T&G (V2S-S1S-SAW-TEXTURED 1S) 3/32"V

B A

11/16"

13/64"

9/32"

13/64"

9/32"

7/32"

1/4"

7/32"

1/4"

1" T&G EE (S2S-CM)

3/32" 3/32"

3/32"

3/32"

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x4 632 33⁄8 31⁄8 1.28

1x6 633 53⁄8 51⁄8 1.18

1x8 634 71⁄8 67⁄8 1.17

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x4 632EE 33⁄8 31⁄8 1.28

1x6 633EE 53⁄8 51⁄8 1.18

1x8 634EE 71⁄8 67⁄8 1.17

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x4 707 33⁄8 31⁄8 1.28

1x6 708 53⁄8 51⁄8 1.18

1x8 715 71⁄8 67⁄8 1.17

1x10 716 91⁄8 87⁄8 1.13

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x4 707R 33⁄8 31⁄8 1.28

1x6 708R 53⁄8 51⁄8 1.18

1x8 715R 71⁄8 67⁄8 1.17

1x10 716R 91⁄8 87⁄8 1.13 george Polygon javierdiaz Text Box Contractor is to verify the exact exterior finish for the Angeles National Forest Supervisor's Office. Old documents show that this item may be the wood pattern for the wood siding.

B A

11/16"

13/64"

9/32"

13/64"

9/32"

7/32"

1/4"

1/4"

7/32"

1/4"

1" T&G (V1S-S2S) 1/4"V

B A

11/16"

13/64"

9/32"

13/64"

9/32"

7/32"

1/4"

7/32"

1/4"

1" T&G (V2S-S1S-SAW-TEXTURED 1S) 1/4"V

1/4" 5/32"

5/32"

5/32"

B A

11/16"

13/64"

9/32"

13/64"

13/32"

7/32"

1/4"

7/32"

3/8"

1" T&G (V2S-S1S-SAW-TEXTURED 1S) 1/4"V

1/4" 5/32"

5/32"

B A

11/16" 9/32"7/16"

7/64"

7/64" 1/8"

3/32"

3/32" 1/4"

3/8"

1" T&G (V2S-S1S-SAW-TEXTURED 1S) 1/8"V

1/8"

7/64" 7/64"

7/64" 7/64"

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x4 709 33⁄8 31⁄8 1.28

1x6 711 53⁄8 51⁄8 1.18

1x8 712 71⁄8 67⁄8 1.17

1x10 713 91⁄8 87⁄8 1.13

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x4 709R 33⁄8 31⁄8 1.28

1x6 711R 53⁄8 51⁄8 1.18

1x8 712R 71⁄8 67⁄8 1.17

1x10 713R 91⁄8 87⁄8 1.13

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x6 726R 53⁄8 5* 1.20

1x8 727R 71⁄8 63⁄4* 1.19

1x10 728R 91⁄8 83⁄4* 1.15 *Under ALS size

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x4 732R 33⁄8 3* 1.33

1x6 733R 53⁄8 5* 1.20

1x8 734R 71⁄8 63⁄4* 1.19 *Under ALS size

NAILING TONGUE & GROOVE PATTERNSREDWOOD TONGUE & GROOVE PATTERNS

Stud

Sheathing

Blind nailed

Nail must penetrate solid wood 1-1/2''

Building paper

Stud

Sheathing

Nail must penetrate solid wood 1-1/2''

Building paper

TONGUE & GROOVE

NAILING METHOD

Horizontal or Vertical Siding (Sideview)

Blind nail 4- and 6-inch widths through the tongue with finish nails.

Use one nail per bearing.

For patterns wider than six inches, face nail using two 8-penny nails per bearing. Position nails one-quarter of the width of the material in from each edge

A

11/32" 11/16"

11/32"1/2"

11/32"

11/32"

1/2"

1" SHIPLAP (S2S)

B A

11/32" 11/16"

11/32"1/2"

11/32"

11/32"

1/2" 1 1/2"

1/2"

1" CHANNEL SHIPLAP (S2S)

BEVELED CHANNEL

B A

11/32" 11/16"

11/32"1/2"

11/32"

11/32"

1/2" 1 1/2"

1" COVE SHIPLAP (S2S)

2 29/32" R

B A

11/32" 11/16"

11/32"1/2"

11/32"

11/32"

1" 1/2"

1" CHANNEL SHIPLAP (S2S)

SQUARE CHANNEL

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x6 761 53⁄8 47⁄8 1.24

1x8 762 71⁄8 65⁄8 1.21

1x10 763 91⁄8 85⁄8 1.16

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x6 770 53⁄8 47⁄8 1.24

1x8 771 71⁄8 65⁄8 1.21

1x10 772 91⁄8 85⁄8 1.16

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x10 773 91⁄8 85⁄8 1.16

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x6 774 53⁄8 47⁄8 1.24

1x8 775 71⁄8 65⁄8 1.21

1x10 776 91⁄8 85⁄8 1.16

REDWOOD SHIPLAP PATTERNS REDWOOD SHIPLAP PATTERNS

B A

11/32" 11/16"

11/32"1/2"

CC

11/32"

11/32"

1/2"

1" CHANNEL V&CV SHIPLAP

1 "

1/2"1/4"

7/32"7/32" (S1S-SAW-TEXTURED 1S) 1/4"V*

SAW-TEXTURED

B A

11/32" 11/16"

11/32"17/32"

11/32"

11/32"

1/2"

1" V SHIPLAP (S2S) 1/4"V

B A

11/32" 11/16"

11/32"1/2"

11/32"

11/32"

29/32"

1" BOSTON SHIPLAP (S2S)

B A

11/32" 11/16"

11/32" 1/2"

11/32"

11/32"

1/2"

1" V SHIPLAP (V2S-S1S-SAW-TEXTURED 1S) 1/4"V

7/32"

7/32"

1/4"

1/4"

7/32"

9/32" R

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B C FACTOR

1x6 784R 53⁄8 47⁄8 115⁄16 1.24

1x8 785R 71⁄8 65⁄8 213⁄16 1.21

1x10 786R 91⁄8 85⁄8 313⁄16 1.16

*Also available without 1⁄2" Center V

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x6 793 53⁄8 47⁄8 1.24

1x8 794 71⁄8 65⁄8 1.21

1x10 795 91⁄8 85⁄8 1.16

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x6 793R 53⁄8 47⁄8 1.24

1x8 794R 71⁄8 65⁄8 1.21

1x10 795R 91⁄8 85⁄8 1.16

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x6 810 53⁄8 47⁄8 1.24

1x8 811 71⁄8 65⁄8 1.21

1x10 812 91⁄8 85⁄8 1.16

NAILING SHIPLAP PATTERNS

A

7/16"

3/16" 1/2" PLAIN SAW-TEXTURED BEVEL SIDING (S1S2E)

SAW-TEXTURED

A

11/16"

3/16" 3/4" PLAIN SAW-TEXTURED BEVEL SIDING (S1S2E)

SAW-TEXTURED

A

7/16"

3/16" 1/2" RABBETED BEVEL SIDING (S1S2E)

A

11/16" 9/32"

3/16"

9/32" 3/4" RABBETED BEVEL SIDING (S1S2E)

RESAWN BACK

1/2"

1/2"

RESAWN BACK

NOMINAL PATTERN CONVERSION

SIZE NUMBER A FACTOR

1⁄2x4 320R 31⁄2 1.60 1⁄2x5 321R 41⁄2 1.43 1⁄2x6 322R 51⁄2 1.34 1⁄2x8 323R 71⁄4 1.28

NOMINAL PATTERN CONVERSION

SIZE NUMBER A FACTOR

3⁄4x6 329R 51⁄2 1.34 3⁄4x8 330R 71⁄4 1.28 3⁄4x10 331R 91⁄4 1.22

NOMINAL PATTERN CONVERSION

SIZE NUMBER A FACTOR

1⁄2x4 360 31⁄2 1.28 1⁄2x6 362 51⁄2 1.17 1⁄2x8 363 71⁄4 1.17

NOMINAL PATTERN CONVERSION

SIZE NUMBER A FACTOR

3⁄4x6 371 51⁄2 1.17 3⁄4x8 372 71⁄4 1.17 3⁄4x10 373 91⁄4 1.13

REDWOOD BEVEL PATTERNS

V SHIPLAP

NAILING METHOD

Horizontal or Vertical Siding (Side view)

For all V Shiplap patterns, face nail with two siding nails per bearing.

For 6-inch wide V-Shiplap, the nail location should be one inch from the overlapping edges.

For wider patterns, position nails one quarter the width of the material in from each edge.

CHANNEL SHIPLAP*

NAILING METHOD

Vertical Siding (Overhead view)

Face nail with two nails per bearing for all patterns.

Space nails 1 inch from edge of over-lap and 1-1/2 inches from edge of underlap for 6-inch patterns. For 8-inch boards, space nails 1-1/2 inches from edge of overlap and 2 inches from edge of underlap.

Nail wider patterns proportionately.

*NOTE: Allow 1/8'' expansion gap at the edges of courses for CKD Channel Shiplap patterns. With air-seasoned Channel Shiplap patterns, butt the edges snugly together.

Stud

Sheathing

Building paper

Nail must penetrate solid wood 1-1/2''

1⁄8'' expansion clearance

Stud

Sheathing

Nail must penetrate solid wood 1-1/2''

Building paper

8-inch pattern shown

8-inch pattern shown

23/64"23/64"

1 1/32"

11/4" RABBETED SAW-TEXTURED BEVEL SIDING (S1S2E)

A

23/64"1/2"

1/2" R* 9/32"

23/64" 11/16"

9/32"

2 7/16"2 15/16"

1"x6" 2 LAP (Round Edge) DROP SIDING (S1S2E)

39/64"

3/4" 27/64"

1/2" R*

A

23/64"1/2"19/64"23/64" 11/16"

19/64"

3 5/16"3 13/16"

1"x8" 2 LAP (Round Edge) DROP SIDING (S1S2E)

A

11/32"1/2"17/64"11/32"

2 7/8"

1/2" R* 11/16" 17/64"

2 7/8"

1"x10" 3 LAP (Round Edge) DROP SIDING (S1S2E)

3 3/8"

A

11/16"

3/4" RABBETED SAW-TEXTURED BEVEL SIDING (S1S2E)

A

7/16" 1/8"*

1/2" RABBETED BEVEL SIDING ROUND EDGE (S1S2E)

RESAWN BACK

A

5/16"

1/8"

1 3/32"

11/4" PLAIN SAW-TEXTURED BEVEL SIDING (S1S2E)

SAW-TEXTURED

FACE

SAW-TEXTURED

FACE

1/2"

1/2" 9/32"9/32"

3/8"R

NOMINAL PATTERN CONVERSION

SIZE NUMBER A FACTOR

1x6 430 53⁄8 1.20

*This pattern is also available with 3⁄8" radius

NOMINAL PATTERN CONVERSION

SIZE NUMBER A FACTOR

1x8 431 71⁄8 1.19

*This pattern is also available with 3⁄8" radius

NOMINAL PATTERN CONVERSION

SIZE NUMBER A FACTOR

1x10 433 91⁄8 1.15

*This pattern is also available with 3⁄8" radius

NOMINAL PATTERN CONVERSION

SIZE NUMBER A FACTOR

11⁄4x6 476 53⁄8* 1.30

11⁄4x8 477 71⁄8* 1.25

*Under ALS size

REDWOOD BEVEL PATTERNS

NOMINAL PATTERN CONVERSION

SIZE NUMBER A FACTOR

3⁄4x6 391 51⁄2 1.17 3⁄4x8 392 71⁄4 1.17 3⁄4x10 393 91⁄4 1.13

NOMINAL PATTERN CONVERSION

SIZE NUMBER A FACTOR

1⁄2x4 400 31⁄2 1.28

*Under ALS size

NOMINAL PATTERN CONVERSION

SIZE NUMBER A FACTOR

11⁄4x6 422 53⁄8* 1.37

11⁄4x8 423 71⁄8* 1.31

11⁄4x10 424 91⁄8* 1.23

*Under ALS size

REDWOOD BEVEL PATTERNS

Illustration is smaller than actual size.

Illustration is smaller than actual size.

NAILING BEVEL PATTERNS

B A

11/2" 15/32"

33/64"

33/64"

13/32"

1/4"

1/4"

7/16"

3/8"

2" T&G DECKING (V1S-S2S) 1/4"V

1/4"

1/4" 17/32"

17/32"

B A

11/2" 15/32"

33/64"

33/64"

13/32"7/16"

3/8"

2" T&G DECKING (S2S-CM)

17/32"

17/32"

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

2x6 482 53⁄8 53⁄4 1.20

2x8 484 71⁄8 63⁄4 1.19

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

2x6 486 53⁄8 53⁄4 1.20

2x8 487 71⁄8 63⁄4 1.19

2x10 488 91⁄8 83⁄4 1.15

2x12 489 111⁄8 103⁄4 1.12

REDWOOD DECKING PATTERNS

Stud

Sheathing

Building paper

Nail clears tip of undercourse

Nail must penetrate solid wood 1-1⁄2''

Overlap undercourse by 1"

1⁄8'' expansion clearance

Stud

Sheathing

Building paper

Nail must penetrate solid wood 1-1⁄2''

PLAIN BEVEL

NAILING METHOD

Horizontal Siding

(Side view)

Face nail with one nail only per bearing. Drive nail so shank clears the top of the preceding undercourse.

BEWARE OF DRIVING NAIL

HOME WITH TOO HEAVY A

FINAL BLOW. WOOD MAY SPLIT

OR CUP DUE TO NON-SUPPORT

IN CAVITY.

RABBETED BEVEL*

NAILING METHOD

Horizontal Siding

(Side view)

Face nail with one nail only per bearing. Drive nail about one inch above lower edge of course.

*NOTE: Allow 1/8'' expansion gap at rabbet for CKD Rabbeted Bevel patterns. With air-seasoned Rabbeted Bevel patterns, butt the edges snugly together.

3/8"

5/32"

5/32"

1/2" 3/16"

5/32"

3/8"

5/32"

7/16" 3/16"3/16"

11/16"

5/8"

B A

5/16"

3/16"

3/8"

3/16" 9/32"

11/32"

11/32"

5/8"

1" FENCING (S2S)

1" FENCING (S2S) 11/16"

A

5/16" 5/8"5/8"

1" DOUBLE PLOW EE (5/16" & 7/16" PLOW)

7/16" 5/16" 5/16"

A

11/16"

11/16"

5/8"

1" SINGLE PLOW EE (5/16" or 7/16" PLOW)

7/16" 5/16" 5/16"

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x6 28 53⁄8 415⁄16 1.22

1x8 29 71⁄8 611⁄16 1.20

NOMINAL PATTERN CONVERSION

SIZE NUMBER A B FACTOR

1x6 30 53⁄8 53⁄32 1.18

1x8 31 71⁄8 627⁄32 1.17

REDWOOD FENCING PATTERNS

NOMINAL PATTERN

SIZE NUMBER PLOW A

1x6 80 5⁄16 51⁄2

1x8 81 5⁄16 71⁄4

1x6 84 7⁄16 51⁄2

1x8 85 7⁄16 71⁄4

NOMINAL PATTERN

SIZE NUMBER A

1x6 88 51⁄2

1x8 89 71⁄4

REDWOOD PLOWED FASCIA PATTERNS

5⁄16" x15⁄8"

Lattice

5⁄16" x15⁄16"

Lattice

5⁄16" x11⁄16"

Lattice

(This number also designates a siding pattern. Be sure to specify moulding when ordering.)

Saw-textured Back

Saw-textured Back

Saw-textured Back

REDWOOD MOULDING PATTERNS

175 176 11⁄16" x2" 11⁄16" x15⁄8"

11⁄16" x15⁄8"

Brick Mould Brick Mould O. G. Batten

11⁄16" x15⁄8" 105 560

11⁄16" x11⁄16" 11⁄16" x21⁄4"

Quarter Round O. G. Batten Bed

208 210 11⁄16" x21⁄4" 11⁄16" x15⁄8"

Panel Mould Panel Mould

558 712 5⁄16" x21⁄2" 9⁄16" x31⁄2"

Flat Batten Base Mould

236EE

11⁄2" x11⁄2"

Panel Mould

11⁄4" x2"

Brick Mould

863 862 11⁄16" x21⁄4" 11⁄16" x21⁄2"

Garage Door Stop Garage Door Stop

PATTERN

NUMBER DESCRIPTION PAGE

16 1x6 T&G Paneling (S2S-CM) 10

17 1x8 T&G Paneling (S2S-CM) 10

18 1x10 T&G Paneling (S2S-CM) 10

204 5⁄8 x4 T&G (V1S-S2S) 3⁄32"V 10

205 5⁄8 x6 T&G (V1S-S2S) 3⁄32"V 10

206 5⁄8 x8 T&G (V1S-S2S) 3⁄32"V 10

320R 1⁄2x4 Plain Saw-textured Bevel Siding (S1S2E) 17

321R 1⁄2x5 Plain Saw-textured Bevel Siding (S1S2E) 17

322R 1⁄2x6 Plain Saw-textured Bevel Siding (S1S2E) 17

323R 1⁄2x8 Plain Saw-textured Bevel Siding (S1S2E) 17

329R 3⁄4x6 Plain Saw-textured Bevel Siding (S1S2E) 17

330R 3⁄4x8 Plain Saw-textured Bevel Siding (S1S2E) 17

331R 3⁄4x10 Plain Saw-textured Bevel Siding (S1S2E) 17

360 1⁄2x4 Rabbeted Bevel Siding (S1S2E) 17

362 1⁄2x6 Rabbeted Bevel Siding (S1S2E) 17

363 1⁄2x8 Rabbeted Bevel Siding (S1S2E) 17

371 3⁄4x6 Rabbeted Bevel Siding (S1S2E) 17

372 3⁄4x8 Rabbeted Bevel Siding (S1S2E) 17

373 3⁄4x10 Rabbeted Bevel Siding (S1S2E) 17

391 3⁄4x6 Rabbeted Saw-textured Bevel Siding (S1S2E) 18

392 3⁄4x8 Rabbeted Saw-textured Bevel Siding (S1S2E) 18

393 3⁄4x10 Rabbeted Saw-textured Bevel Siding (S1S2E) 18

400 1⁄2x4 Rabbeted Bevel Siding Round Edge (S1S2E) 18

422 11⁄4x6 Plain Saw-textured Bevel Siding (S1S2E) 18

423 11⁄4x8 Plain Saw-textured Bevel Siding (S1S2E) 18

424 11⁄4x10 Plain Saw-textured Bevel Siding (S1S2E) 18

430 1x6 2 LAP (Round Edge) Drop Siding (S1S2E) 19

431 1x8 2 LAP (Round Edge) Drop Siding (S1S2E) 19

433 1x10 3 LAP (Round Edge) Drop Siding (S1S2E) 19

476 11⁄4 x6 Rabbeted Saw-textured Bevel Siding (S1S2E) 19

477 11⁄4 x 8 Rabbeted Saw-textured Bevel Siding (S1S2E) 19

606 1x6 T&G Drop Siding (S2S) 10

616 1x6 T&G V&CV (S2S) 1⁄4"V 10

617 1x8 T&G V&CV (S2S) 1⁄4"V 10

632 1x4 T&G (S2S-CM) 11

632EE 1x4 T&G EE (S2S-CM) 11

633 1x6 T&G (S2S-CM) 11

633EE 1x6 T&G EE (S2S-CM) 11

634 1x8 T&G (S2S-CM) 11

634EE 1x8 T&G EE (S2S-CM) 11

PATTERN

NUMBER DESCRIPTION PAGE

707 1x4 T&G (V1S-S2S) 3⁄32"V 11

707R 1x4 T&G (V2S-S1S-Saw-textured 1S) 3⁄32"V 11

708 1x6 T&G (V1S-S2S) 3⁄32"V 11

708R 1x6 T&G (V2S-S1S-Saw-textured 1S) 3⁄32"V 11

709 1x4 T&G (V1S-S2S) 1⁄4"V 12

709R 1x4 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

711 1x6 T&G (V1S-S2S) 1⁄4"V 12

711R 1x6 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

712 1x8 T&G (V1S-S2S) 1⁄4"V 12

712R 1x8 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

713 1x10 T&G (V1S-S2S) 1⁄4"V 12

713R 1x10 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

715 1x8 T&G (V1S-S2S) 3⁄32"V 11

715R 1x8 T&G (V2S-S1S-Saw-textured 1S) 3⁄32"V 11

716 1x10 T&G (V1S-S2S) 3⁄32"V 11

716R 1x10 T&G (V2S-S1S-Saw-textured 1S) 3⁄32"V 11

726R 1x6 T&G (V2S-S1S-Saw-textured 1S) 1⁄8"V 12

727R 1x8 T&G (V2S-S1S-Saw-textured 1S) 1⁄8"V 12

728R 1x10 T&G (V2S-S1S-Saw-textured 1S) 1⁄8"V 12

732R 1x4 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

733R 1x6 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

734R 1x8 T&G (V2S-S1S-Saw-textured 1S) 1⁄4"V 12

761 1x6 Shiplap (S2S) 14

762 1x8 Shiplap (S2S) 14

763 1x10 Shiplap (S2S) 14

770 1x6 Cove Shiplap (S2S) 14

771 1x8 Cove Shiplap (S2S) 14

772 1x10 Cove Shiplap (S2S) 14

773 1x10 Channel Shiplap (S2S) Beveled Channel 14

774 1x6 Channel Shiplap (S2S) Square Channel 14

775 1x8 Channel Shiplap (S2S) Square Channel 14

776 1x10 Channel Shiplap (S2S) Square Channel 14

784R 1x6 Channel V&CV Shiplap (S1S-Saw-textured 1S) 1⁄4"V 15

785R 1x8 Channel V&CV Shiplap (S1S-Saw-textured 1S) 1⁄4"V 15

786R 1x10 Channel V&CV Shiplap (S1S-Saw-textured 1S) 1⁄4"V 15

793 1x6 V Shiplap (S2S) 1⁄4"V 15

793R 1x6 V Shiplap (V2S-S1S-Saw-textured 1S) 1⁄4"V 15

794 1x8 V ShipIap (S2S) 1⁄4"V 15

794R 1x8 V Shiplap (V2S-S1S-Saw-textured 1S) 1⁄4"V 15

795 1x10 V Shiplap (S2S) 1⁄4"V 15

795R 1x10 V Shiplap (V2S-S1S-Saw-textured 1S) 1⁄4"V 15

810 1x6 Boston Shiplap (S2S) 15

811 1x8 Boston Shiplap (S2S) 15

812 1x10 Boston Shiplap (S2S) 15

INDEX

SIDING AND PANELING PATTERNS

DECKING PATTERNS

PATTERN

NUMBER DESCRIPTION PAGE

482 2x6 T&G Decking (S2S-CM) 21

484 2x8 T&G Decking (S2S-CM) 21

486 2x6 T&G Decking (V1S-S2S) 1⁄4"V 21

PATTERN

NUMBER DESCRIPTION PAGE

487 2x8 T&G Decking (V1S-S2S) 1⁄4"V 21

488 2x10 T&G Decking (V1S-S2S) 1⁄4"V 21

489 2x12 T&G Decking (V1S-S2S) 1⁄4"V 21

PLOWED FASCIA PATTERNS

PATTERN

NUMBER DESCRIPTION PAGE

81 1x8 Single Plow EE 22

84 1x6 Single Plow EE 22

PATTERN

NUMBER DESCRIPTION PAGE

85 1x8 Single Plow EE 22

88 1x6 Double Plow EE 22

89 1x8 Double Plow EE 22

FENCING PATTERNS

PATTERN

NUMBER DESCRIPTION PAGE

28 1x6 Fencing (S2S) 23

29 1x8 Fencing (S2S) 23

PATTERN

NUMBER DESCRIPTION PAGE

30 1x6 Fencing (S2S) 23

31 1x8 Fencing (S2S) 23

INDEX

MOULDING PATTERNS

PATTERN

NUMBER DESCRIPTION PAGE

75 11⁄16x15⁄8 Bed Mould 24

105 11⁄16x11⁄16 Quarter Round Mould 24

175 11⁄16x2 Brick Mould 24

176 11⁄16x15⁄8 Brick Mould 24

180 11⁄4x2 Brick Mould 24

208 11⁄16x21⁄4 Panel Mould 24

210 11⁄16x15⁄8 Panel Mould 24

236EE 11⁄2x11⁄2 Panel Mould 24

266 5⁄16x15⁄8 Lattice 24

PATTERN

NUMBER DESCRIPTION PAGE

267 5⁄16x15⁄16 Lattice 24

268 5⁄16x11⁄16 LattIce 24

558 5⁄16x21⁄2 Flat Batten 24

559 11⁄16x15⁄8 O.G. Batten 24

560 11⁄16x21⁄4 O.G. Batten 24

712 9⁄16x31⁄2 Base Mould 24

862 11⁄16x21⁄2 Garage Door Stop 24

863 11⁄16x21⁄4 Garage Door Stop 24

1/04 5M

ANF Exterior Finish Carpentry Specifications