47QSWC23Q00106 0002 ATCH 3 Vendor Questions.pdf
PDF 80 KB Posted
- Solicitation number
- 47QSWC23Q0106
- Issued by
-
GSA Federal Acquisition Service
About this file
This document contains questions and answers from potential vendors regarding solicitation number 47QSWC23Q0106 for a conveyorized and batch powder coating system with ovens for the General Services Administration Federal Acquisition Service. The solicitation seeks a powder coating system with a 3'w x 5'h opening and maximum part sizes of 6-8 feet in length, 2'w x 4'h. Pretreatment requirements vary by material, with some aluminum parts requiring conversion coating and steel parts able to be processed through phosphating or without pretreatment.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
47QSWC23Q00106 0002 - MDMC Powder Coating System
Vendor Questions
08/29/2023
Q1. Based on the 3’w x 5’h opening, I assume the max part size is 2’w x 4’h. What is the max part length?
A1. 6-8 ft is our largest parts that could potentially be ran. Most big parts we run on our batch system.
Q2. Are there any pretreatment requirements for the parts prior to coating?
A2. Some parts such as aluminum is usually conversion coated but not always required steel parts are also processed thru phoscoat or are not required. It all depends.
File details come from the government source that posted it. Updated .