2._IPD_8115-00-719-4111.pdf

ITEM PURCHASE DESCRIPTION

General Services Administration

Printed on: 3/20/2019, 11:02:33 AM

8115-00-719-4111 UI: KT

KIT, FUEL SAMPLING

DESCRIPTION

ITEM NAME KIT, FUEL SAMPLING

I.A.W. MIL-K-23714C

I.A.W. FLEXTRON INDUSTRIES P/N P001-2

OR EQUAL COMMERCIAL

USAGE DESIGN SHIPPING FUEL SAMPLES

SAMPLING BOTTLE QUANTITY FOUR (4)

SAMPLING BOTTLE FLUID CAPACITY 32.00 OUNCES

SAMPLING BOTTLE OVERALL WIDTH 3.687 INCHES (+ /- 0.062 INCHES)

SAMPLING BOTTLE OVERALL HEIGHT 8.125 INCHES (+ /- 0.062 INCHES)

SAMPLING BOTTLE MOUTH DIAMETER 1.312 INCHES

SAMPLING BOTTLE COLOR AMBER OR CLEAR

I.A.W. NORMAL COMMERCIAL STANDARDS

SAMPLING BOTTLE MATERIAL BOROSILICATE GLASS

SAMPLING BOTTLE TYPE WITH CLOSURE CAPS

CLOSURE CAP QUANTITY FOUR (4)

CLOSURE CAP OUTSIDE DIAMETER 1.385 INCHES

CLOSURE CAP OVERALL DEPTH 0.502 INCHES

CLOSURE CAP COLOR BLACK

CLOSURE CAP TYPE POLYETHYLENE CONE LINERS

CUSHIONING MATERIAL QUANTITY TWO (2)

CUSHIONING MATERIAL TYPE ELASTIC POLYETHER URETHANE FOAM

CUSIONNING MATERIAL LOCATION TOP AND BOTTOM

SAMPLING TAG QUANTITY FOUR (4)

SAMPLING TAG WIDTH 0.250 INCHES MIN TO 3.125 INCHES MAX

SAMPLING TAG LENGTH 3.125 INCHES MIN TO 6.250 INCHES MAX

SAMPLING TAG COLOR WHITE

SAMPLING TAG MATERIAL CLOTH

TAMPERPROOF SEAL WIRE TYPE COPPER

TAMPERPROOF SEAL WIRE ANY ACCEPTABLE

I.A.W. NORMAL COMMERCIAL STANDARDS

TAMPERPROOF SEAL LEAD DIAMETER 0.375 INCHES MIN TO 0.5625 INCHES MAX

I.A.W. NORMAL COMMERCIAL STANDARDS

TAMPERPROOF SEAL LEAD DEPTH 0.188 INCHES

I.A.W. NORMAL COMMERCIAL STANDARDS

EXTERIOR CONTAINER CAPACITY 9.000 GALLONS

EXTERIOR CONTAINER INSIDE DIAMETER 13.81 INCHES

EXTERIOR CONTAINER INSIDE HEIGHT 14.19 INCHES

EXTERIOR CONTAINER COLOR RED SEMI GLOSS ENAMEL

(NO. 21136 OF FED-STD-595)

EXTERIOR CONTAINER MATERIAL 20-GAUGE STEEL

PROPRIETARY CHARACTERISTICS PACS

BIDDING ON:

Manufacturer's Name: __________________________

Brand___________________________________

Model or Part No. __________________________________

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage.

The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD

129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC

Guidelines for treatment of non-manufactured wood packaging: The International Plant

Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the

IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST

PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED

MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL

BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN

REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal

Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.