Attachment 8. National Stock Numbers.pdf

ITEM PURCHASE DESCRIPTION

General Services Administration

1 | P a g e

ITEM PRODUCT DESCRIPTIONS - JAPAN

(IPD)

Table of Contents

Section 1 Pages 2 – 443 Office Supplies/Packaging Material 145 IPD

Section 2 Pages 444 – 722 Janitorial/Sanitation/General Supplies 121 IPD

Section 3 Pages 723-904 Hardware/Maintenance Repair Operation Supply 127 IPD

Section 4 Pages 905 - 1009 Furniture/Housewares 19 IPD

Section 5 Pages 1010 - 1016 Ability One 344 NSN/IPD

5820-01-518-3622 UI: SE

2 | P a g e

RECEIVER-TRANSMITTER, RADIO

DESCRIPTION

ITEM NAME RADIO, RECEIVER-TRANSMITTER (WALKIE TALKIE),

FRS/GMRS

PRODUCT HEIGHT 7.00 INCHES (+/- 3.00 IN. (UNIT)

0.875 INCHES (+/- 0.25 IN.) (DISPLAY)

PRODUCT WIDTH 3.25 INCHES (+/- 1.00 IN.) (UNIT)

1.25 INCHES (+/- 0.2. IN) (DISPLAY)

PRODUCT DEPTH 1.75 INCHES (+/- 0.75 IN.)

BASIS WEIGHT 1.00 POUNDS MAXIMUM (UNIT)

4.00 POUNDS NOMINAL (SET)

DISPLAY TYPE LCD

DISPLAY LIGHTING BACKLIT

MIC AND HEADPHONE JACKS INCLUDED

FREQUENCY 462.550 ~ 467.7125 MHz

WEATHER FREQUENCY 162.400 TO 163.275 MHz

NOAA WEATHER ALERT RADIO INCLUDED

WEATHER SCAN INCLUDED

RANGE 30 MILES OR BETTER

TRANSMIT POWER MAXIMUM ALLOWED BY LAW

CHANNEL QUANTITY 22 FRS AND GMRS (MINIMUM)

VOX LEVELS 5 MINIMUM

RoHS COMPLIANT YES

CERTIFICATION FCC CERTIFICATION PART 95

3 | P a g e

ALERTS VIBRATE ALERT

ROGER BEEP TO INDICATE CALL COMPLETION

AUDIBLE KEYSTROKE TONES

PRIVACY CODES 38 CTCSS, 104 DCS (142 MINIMUM, 3124 CHANNEL

OPTIONS)

SILENT OPERATION INCLUDED

CHANNEL SCAN INCLUDED

MONITORING FEATURE INCLUDED

DIRECT CALL FEATURE INCLUDED

AUTO SQUELCH INCLUDED

KEYPAD LOCK INCLUDED

POWER SUPPLY RECHARGEABLE BATTERIES (NiMH OR LITHIUM ION)

RECHARGEABLE BATTERIES INCLUDED

NONRECHARGEABLE BATTERIES NOT INCLUDED

TRANSMIT POWER SETTINGS HIGH AND LOW

CHARGER COMPATIBILITY DROP-IN CHARGER COMPATIBLE

INCLUDED IN SET ONE (1) PAIR OF RADIOS

BELT CLIPS

AC CHARGER / DC ADAPTER

RECHARGEABLE BATTERY PACKS

PAIR OF BOOM MIC HEADSETS

ENVIRONMENTAL PROCTECTIONJIS4 WATER RESISTANCE (MINIMUM)

SPECIAL MARKINGS: In addition to normal commercial markings, each packaged set shall contain a label with the following text:

FRS Frequencies use: Federal government entities are authorized to purchase and operate radios certified by the FCC in the Family Radio Service (FRS), pursuant to Part 95 Subpart B of the FCC

4 | P a g e

Rules and Regulations (Title 47, Code of Federal Regulations). Government users will be accorded the same privileges as non-federal users. Because FRS users must share each channel and no user is assured protection from interference caused by another authorized user, Federal entities may not purchase and operate FRS radios for planned communications operations that safeguard human life or property.

GMRS Frequencies use: Use of GMRS Frequencies requires an FCC license. It is the responsibility of the user to file for an appropriate FCC License. Per Title 47 CFR, Part 95 Subpart A Section 95.5, an individual is eligible to be licensed, but a non-individual (an entity other than an individual) is ineligible to obtain a GMRS license.

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

6645-00-250-4680 UI: EA

5 | P a g e

STOPWATCH

ITEM NAME STOPWATCH

OVERALL DIAMETER SIZE 2.000 INCHES

OVERALL THICKNESS 0.500 INCHES

MINIMUM JEWEL QUANTITY 7

MAXIMUM BASIS WEIGHT 1 POUND

GRADUATION UNIT 1.000 MINUTE AND 0.200 (1/5) SECOND

TOTAL READER TIME 30 MINUTES

SCALE NAME MINUTE TOTALIZING AND SECONDS

SCALE QUANTITY 2

SCALE RANGE +0.00 / +30.00 MINUTE AND +0.00/ +60.00

SECOND

TOTALIZER DIAL RANGE +0.00 / +30.00 IN MINUTES

SWEEP HAND QUANTITY 1

MOVEMENT SIZE DESIGNATION 16

CASE MATERIAL ANY ACCEPTABLE

CASE SURFACE TREATMENT ANY ACCEPTABLE

JEWEL TYPE NATURAL OR SYNTHETIC SAPPHIRE, RUBY OR

GARNET

WATCH TYPE SINGLE ACTION

BEZEL TYPE ANY ACCEPTABLE

CRYSTAL TYPE ANY ACCEPTABLE

FACE TYPE OPEN POCKET

OVERALL BACKGROUND COLOR WHITE

6 | P a g e

OVERALL CRYSTAL COLOR CLEAR, UNCOLORED

INSCRIPTION COLOR ANY ACCEPTABLE

MAJOR GRADUATION COLOR ANY ACCEPTABLE

MINOR GRADUATION COLOR ANY ACCEPTABLE

DIAL BACKGROUND COLOR WHITE ENAMEL

DIAL NUMERAL COLOR BLACK

DIAL SCALE MARKING COLOR ANY ACCEPTABLE

DIAL SCALE MARKING LUMINOSITY NON-LUMINOUS

SEPARATE TOTALIZER DIAL INCLUDED

WINDING METHOD STEM

STEM OPERATION CONSECUTIVE CROWN DEPRESSIONS FOR

STOP, START AND RETURN TO ZERO

MOVEMENT TYPE CONTINUOUS RUNNING

NON-MAGNETIC CHARACTERISTIC INCLUDED

ESCAPEMENT TYPE ANY ACCEPTABLE

SUBMERSIBILITY NON-SUBMERSIBLE

SHOCKPROOF FEATURE INCLUDED

WATER RESISTANT FEATURE INCLUDED

STRIKING MECHANISM NOT INCLUDED

CIVIL DATE INDICATOR NOT INCLUDED

LUMINOUS DIAL NOT INCLUDED

LUMINOUS HAND NOT INCLUDED

LUMINOUS NUMERAL NOT INCLUDED

SPECIAL FEATURE USED FOR LABORATORIES AND GEOLOGICAL

SURVEYS

7 | P a g e

IN AREAS OF HIGH HUMIDITY AND DUST

ENVIRONMENTAL PROTECTION DUST, WATER,

ANIT-MAGNETIC, SHOCK, CORROSION AND

EROSION RESISTANT CAUSED BY ACIDS

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

8 | P a g e

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

7045-01-412-5317 UI: EA

PAD, MOUSE

9 | P a g e

ITEM NAME PAD, MOUSE

OVERALL WIDTH 8.000 INCHES TO 10.00 INCHES

OVERALL LENGTH 9.500 INCHES TO 12.00 INCHES

WRIST PAD THICKNESS 1.000 INCHES (+ 0.500 INCH / - 0.30 INCH)

MOUSE PAD THICKNESS 0.250 INCHES (+ 0.125 INCH / - 0.068 INCH)

USAGE DESIGN ERGONOMIC PAD FOR USE WITH ANY COMPUTER

MOUSE

OVERALL COLOR BLACK OR SLATE

OVERALL MATERIAL FABRIC COVER WITH A GEL OR RESILIENT FOAM

INTERIOR (WRIST REST AREA)

PAD SIZE UNIVERSAL SIZE TO FIT ALL HAND AND MOUSE SIZES

BASE TYPE NON-SKID

SPECIAL FEATURE COMBINATION WRIST REST AND MOUSE PAD

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

FED-STD-123H

10 | P a g e https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_1510 07.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

11 | P a g e

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

WORKMANSHIP: THE GEL WRIST REST SHALL BE UNIFORMLY CONSTRUCTED IN

ACCORDANCE WITH GOOD COMMERCIAL PRACTICE AND BE FREE FROM DEFECTS WHICH

MAY IMPAIR THE UTILITY OF THE PRODUCT FOR THE INTENDED USE. THE GEL WRIST REST

SURFACE SHALL BE DURABLE, SMOOTH, UNIFORM AND BE FILLED WITH A STABLE GEL

MATERIAL THAT IS COMMERCIALLY USED IN SIMILAR OFFICE PRODUCTS. THE GEL WRIST

REST SHALL BE CONSTRUCTED TO PREVENT LEAKAGE OF ANY OF THE FILLING MATERIAL

DURING THE USEFUL LIFE OF THE ITEM.

12 | P a g e

7045-01-477-7792 UI: EA

PAD, MOUSE

ITEM NAME PAD, MOUSE

OVERALL WIDTH 10.00 INCHES (+/- 1.00 INCH)

OVERALL LENGTH 12.00 INCHES (+/- 1.00 INCH)

OVERALL HEIGHT 1.500 INCHES (+/- 0.25 INCH)

BASIS WEIGHT 1.200 LBS

OVERALL COLOR BLACK

COVER MATERIAL LYCRA

CUSHIONING MATERIAL GEL FILLED

SPECIAL FEATURES PATENTED MECHANISM ALLOWS THE GEL WRIST

REST TO GLIDE FREELY AT THE BASE OF THE

MOUSE PAD. PROVIDES AN OPTICAL FRIENDLY

MOUSE TRACKING SURFACE; DURABLE

AND ERGONOMIC

ENVIRONMENTAL PROTECTION STAIN RESISTANT

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

13 | P a g e

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_1510 07.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

14 | P a g e

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: THE GEL WRIST REST SHALL BE UNIFORMLY CONSTRUCTED IN

ACCORDANCE WITH GOOD COMMERCIAL PRACTICE AND BE FREE FROM DEFECTS WHICH

MAY IMPAIR THE UTILITY OF THE PRODUCT FOR THE INTENDED USE. THE GEL WRIST REST

SURFACE SHALL BE DURABLE, SMOOTH, UNIFORM AND BE FILLED WITH A STABLE GEL

MATERIAL THAT IS COMMERCIALLY USED IN SIMILAR OFFICE PRODUCTS. THE GEL WRIST

REST SHALL BE CONSTRUCTED TO PREVENT LEAKAGE OF ANY OF THE FILLING MATERIAL

DURING THE USEFUL LIFE OF THE ITEM.

15 | P a g e

7045-01-515-6774 UI: PG

DISK, NONFLEXIBLE

DESCRIPTION

ITEM NAME DISK, NONFLEXIBLE (CD-RW)

OVERALL DISK DIAMETER 4.750 INCHES

RECORDING SURFACE COLOR SILVER

RECORDING DATA CAPACITY 700MB (DATA)

RECORDING TIME CAPACITY 80 MINUTES (AUDIO)

RECORDING SPEED 1X MINIMUM TO 4X MAXIMUM

REWRITABILITY UP TO 1,000 TIMES

MEDIA STORAGE CAPABILITY AUDIO, VIDEO, DIGITAL PICTURES AND DATA

SIDE TYPE SINGLE

UNIT PACKAGE FORM SPINDLE

UNIT PACKAGE QUANTITY 25 DISKS PER SPINDLE

PACKAGING/PACKING: Twenty-five (25) nonflexible disks shall be packaged on a spindle in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage.

The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

16 | P a g e http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_1510 07.pdf

Marking: Each individual recordable DVD/CD shall be permanently marked on the non-recordable side with a manufacturer's brand name; media type; storage and time capacity; recording speed, in accordance with industry standard.

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

17 | P a g e

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

18 | P a g e

7105-00-782-3166 UI: EA

STOOL, STEP

DESCRIPTION

ITEM NAME STOOL, STEP

I.A.W. A-A-3014

FED-STD-595

OVERALL HEIGHT 13.00 INCHES

OVERALL DEPTH 16.00 INCHES

MAXIMUM WEIGHT CAPACITY 350 POUNDS

OVERALL COLOR BLACK FRAME

OVERALL MATERIAL PLASTIC OR STEEL FRAME

SURFACE TREATMENT ENAMEL FRAME

BASE TYPE FLAT

DUTY TYPE HEAVY DUTY

BASE END TYPE SWIVEL CASTERS

SPECIAL FEATURES STEP STOOL GLIDES EASILY ON RETRACTABLE CASTERS

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

19 | P a g e

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

20 | P a g e

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

21 | P a g e

7490-01-459-8264 UI: BT

OIL, SHREDDING MACHINE

DESCRIPTION

ITEM NAME OIL, SHREDDING MACHINE

OVERALL CAPACITY 12.00 OUNCES

USAGE APPLICATION LUBRICANT FOR USE ESPECIALLY IN CROSS-CUT

SHREDDERS

OVERALL COLOR CLEAR

OVERALL MATERIAL OIL

MATERIAL TRANSPARENCY CLEAR

CONTAINER TYPE SQUEEZE BOTTLE WITH EXTENSION NOZZLE OR

NARROW APPLICATION TIP

BOTTLE TYPE UNBREAKABLE, LEAK RESISTANT

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

FED-STD-123H

22 | P a g e http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_1510 07.pdf

In addition, supplier shall provide MSDS in accordance with Fed-Std-313D, dated April 3, 1996, and Change Notice 1, dated March 21, 2000.

MSDS - Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities.

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

23 | P a g e

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

24 | P a g e

7490-01-498-9096 UI: EA

SHREDDING MACHINE, PAPER

DESCRIPTION

ITEM NAME SHREDDING MACHINE, PAPER

I.A.W. NSA / CSS SPECIFICATION 02-01

OVERALL WIDTH 21.50 IN. (ALL DIMENSIONS +/-10 PERCENT)

OVERALL HEIGHT 37.00 IN. (ALL DIMENSIONS +/-10 PERCENT)

OVERALL DEPTH 20.25 IN. (ALL DIMENSIONS +/-15 PERCENT)

THROAT OPENING WIDTH 10.00 INCHES TO 11.25 INCHES

MAXIMUM PRODUCT WEIGHT 140 POUNDS

SECURITY TYPE HIGH SECURITY - LEVEL 6 / P7

ONE HOUR NSA DURABILITY TEST 11 REAMS WHEN FEEDING 5 SHEETS (OR

BETTER)

MOTOR TYPE CONTINUOUS DUTY

MINIMUM SHRED SPEED 20 FT / MIN

OVERALL SHRED SIZE 1.00 MM X 5.00 MM (+2 PERCENT, -20

PERCENT)

CUTTING ROLLER MATERIAL HARDENED STEEL

POWER RATING 1.00 HP

POWER SOURCE 115 VOLTS AC POWER, 60HZ, 15 AMP CIRCUIT

MINIMUM CONTAINER VOLUME 25 GALLON

SHEET CAPACITY 6 TO 8 SHEETS / PASS

AUTOMATIC OILER INCLUDED

AUTOMATIC OILER CAPACITY 1.50 LITER (MINIMUM FOR EXTERNAL

CONTAINER) OR 0.50 LITER (MINIMUM FOR

25 | P a g e

INTERNAL RESERVOIR)

SHREDDED MATERIAL LOCATION KEPT IN AN ENCLOSED SECTION OF SHREDDER

AND CAN BE EASILY REMOVED FOR DISPOSAL

SPECIAL FEATURE THERMALLY PROTECTED MOTOR TO PREVENT

OVERHEATING

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution

26 | P a g e facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall

PCM

Regulatory Requirements: The offerer/contractor is encouraged to provide energy-efficient products to the maximum extent practicable in accordance with paragraph 23.203 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

27 | P a g e

7490-01-503-9122 UI: EA

ITEM NAME SHREDDING MACHINE, PAPER

OVERALL WIDTH 21.00 INCHES (+/- 10 PERCENT)

OVERALL HEIGHT 38.00 INCHES ( +/- 10 PERCENT)

OVERALL DEPTH 16.00 INCHES (+/- 10 PERCENT)

THROAT OPENING WIDTH 12.25 INCHES (+/- 0.75 INCHES) TOP FEED

MAXIMUM OVERALL WEIGHT 140.0 POUNDS

SECURITY LEVEL HIGH - LEVEL 6 I.A.W. NSA/CSS SPECIFICATION 02-01

MOTOR TYPE CONTINUOUS DUTY

SHRED TYPE CROSS CUT

SHRED SIZE 0.80 MM X 4.80 MM (+2 PERCENT, -20 PERCENT)

MINIMUM SHRED SPEED 24 FT/MIN

CUTTING ROLLER MATERIAL HARDENED STEEL

POWER RATING 2.4 HP NOMINAL

POWER SOURCE 115 VOLTS AC POWER, 60HZ, 20 AMP CIRCUIT

MINIMUM CONTAINER VOLUME 25 GALLON

SHEET CAPACITY UP TO 12 SHEETS/PASS

AUTOMATIC OILER INCLUDED

AUTOMATIC OILER CAPACITY 0.50 GALLON (MINIMUM FOR EXTERNAL CONTAINER)

OR 0.50 LITER (MINIMUM INTERNAL CAPACITY)

ONE HOUR NSA DURABILITY TEST 17 REAMS WHEN FEEDING 6 SHEETS (OR BETTER)

SHREDDED MATERIAL LOCATION KEPT IN AN ENCLOSED SECTION OF SHREDDER AND

28 | P a g e

CAN BE EASILY REMOVED FOR DISPOSAL

SPECIAL FEATURE THERMALLY PROTECTED MOTOR TO PREVENT

OVERHEATING

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall

29 | P a g e

Regulatory Requirements: The offerer/contractor is encouraged to provide energy-efficient products to the maximum extent practicable in accordance with paragraph 23.203 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

30 | P a g e

7490-01-664-9499 UI: EA

DESCRIPTION

ITEM NAME SHREDDING MACHINE, PAPER

OVERALL WIDTH 20.00 INCHES (+/- 10%)

OVERALL HEIGHT 34.00 INCHES (+/- 10%)

OVERALL DEPTH 20.00 INCHES (+/- 10%)

THROAT OPENING 11.75 INCHES (+1.25 INCHES / -0.25 INCHES)

MAXIMUM WEIGHT 215.0 POUNDS

BIN CAPACITY 30.00 GALLONS (MINIMUM)

SECURITY TYPE HIGH SECURITY

SECURITY LEVEL P-7 (DIN 66399) FOR MAXIMUM SECURITY

I.A.W. NSA/CSS SPECIFICATION 02-01

UNIT DESIGN SPECIAL DESIGN CUTTING HEAD WITH NO

OIL USAGE REQUIRED

AVERAGE SHRED SIZE 0.0394 INCHES X 0.157 INCHES

SHEET CAPACITY UP TO 18 SHEETS

POWER RATING 1.5 HP

ONE HOUR NSA DURABILITY TEST 18 REAMS FEEDING 6 SHEETS (OR BETTER)

DESTRUCTION CAPABILITY PAPER

POWER REQUIREMENT 115V/60Hz OR 220V/50Hz (SPECIAL ORDER)

CUTTING ROLLER MATERIAL HARDENED STEEL

AUTO STOP / START YES

START KIT BASIC

SAFETY PROTECTION SYSTEM YES

31 | P a g e

ENERGY SAVING MODE YES

EASY SWITCH TYPE LCD DISPLAY

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 4, dated September 19, 2007. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall

32 | P a g e

Regulatory Requirements: The offerer/contractor is encouraged to provide energy-efficient products to the maximum extent practicable in accordance with paragraph 23.203 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness.

The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

33 | P a g e

7510-00-132-5109 UI: RO

TAPE, PRESSURE SENSITIVE ADHESIVE

DESCRIPTION

IN ACCORDANCE WITH A-A-59341, DATED SEPTEMBER 29, 1998. THIS DESCRIPTION COVERS

THE GENERAL REQUIREMENTS FOR A DOUBLE COATED FLEXIBLE FOAM PRESSURE

SENSITIVE ADHESIVE TAPE IN ROLL FORM WOUND ON A 3 INCH CORE WITH A RELEASE

LINER.

ITEM NAME TAPE, PRESSURE SENSITIVE ADHESIVE

OVERALL WIDTH 0.750 INCHES

OVERALL LENGTH 72.00 YARDS

OVERALL CORE DIAMETER 3.000 INCHES

OVERALL THICKNESS 0.031 INCHES

UNIT TYPE FOAM TAPE

UNIT DESIGN DOUBLE-SIDED

USAGE DESIGN FOR THERMAL INSULATION, GASKETING, SEALING,

JOINING, REDUCING SHOCK AND VIBRATION

USAGE FORM ROLL

OVERALL COLOR BLACK

OVERALL MATERIAL RUBBER SYNTHETIC; NEOPRENE

MATERIAL TRANSPARENCY OPAQUE

DUTY RATING LIGHT

SURFACE LUSTER LUSTERLESS

ADHESIVE TYPE ACRYLIC

ADHESIVE LOCATION BOTH SIDES

LINER PROVIDED

LINER COLOR TAN

34 | P a g e

LINER MATERIAL PAPER

ENVIRONMENTAL PROTECTION HIGH TEMPERATURE RESISTANT

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

SHELF LIFE

ITEM: Tapes, Pressure Sensitive, Adhesive

Type II: Extendable

Age on Delivery: 3 Months

Shelf Life Code: 5 (18 Months Extendable Shelf Life)

Tapes shall be delivered within three (3) months after the manufacture date, and have a shelf life of eighteen (18) months after the manufacture date. After eighteen (18) months, the Government reserves the right to extend the shelf life at its discretion.

SHELF LIFE MARKINGS: Unless otherwise specified in the contract or purchase order, each roll and intermediate container shall be marked with the date of manufacture, expiration or inspection date, and lot/batch number as applicable.

MARKING

For civilian destinations - In accordance with FED-STD-123G, dated June 6, 1997. For military destinations - In accordance with MIL-STD-129P, dated December 15, 2002, and Change 3, dated October 29, 2004. Bar code marking shall be included for both civilian and military destinations. In addition, the shipping containers shall be marked with the date of manufacture and the date of reinspection (12 months after the date of manufacture).

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of

35 | P a g e transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

GSA prefers and encourages the procurement of Pressure Sensitive Adhesive products that are Executive Order 13148, Sec. 702 compliant. Information on E.O. 13148 may be found at:

www.archives.gov/federal-register/executive-orders/disposition.html.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE

OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS

COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH

THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market.