Amendment 3 Continuation Pages (Japan).docx

47QSCC20R0010 AMENDMENT 0003 SF 30 CONTINUATION PAGES

a) THE FOLLOWING LANGUAGE UNDER SECTION E.6.1 OF THE SOLICITATION DOCUMENT AND THE SAME LANGUAGE IN AMENDMENT 0002, IS HEREBY CHANGED WITH THE FOLLOWING TRACKED CHANGES:

E.6.1 General Instructions

a) Phase I proposal documents (Volumes 1 and 2) shall be submitted electronically via email to Dominic.Lackey@gsa.gov and Michael.Sheckels@gsa.gov by February 25 March 3, 2020 at 10:00 AM, EST. All volumes required for the Phase I evaluation must be received timely or the proposal as a whole may be considered late.

b) Phase II proposal documents (Volumes 3 and 4) shall be submitted via email to Dominic.Lackey@gsa.gov and Michael.Sheckels@gsa.gov at a time and date when notified by the CO. Instructions on when to submit proposal volumes under the Phase II evaluation will be provided at the time offerors are notified via email of the outcome of their Phase I evaluation.

c) Offerors shall submit their Phase I and II proposal documents in soft copy electronic version. All documents should be in Microsoft Office 2007 or Adobe Acrobat 9.4 or later, in a searchable format. Electronic proposal documents shall be consolidated by volume. If documents cannot be grouped within one *.zip file and/or one email, offerors may use multiple emails provided they label each email “Email X of X” (ex. “Email 1 of 3”).

d) GSA accepts no responsibility and shall not be held liable for incomplete and/or late proposal submissions due to technical difficulties in transmission of messages and/or documents exceeding the 25MB per email limit. It is recommended that offerors not wait until the last day/hour proposals are due to attempt their proposal submission.

e) Communications and comments concerning the contents of this RFP shall be accepted no later than 10:00 AM on February 7, 2020 in the following link only:

https://docs.google.com/forms/d/1ptaur1mtGtu1ukVqhyOj1dFgEPO6aGsa1ipf-h4D_CY/edit. Questions received and GSA’s responses will be posted to www.beta.sam.gov at regular intervals during the proposal period. Identities of prospective Offerors asking questions will not be disclosed and any proprietary information contained within questions will be redacted. Questions should cite the section, paragraph number and page number in question within the RFP. Statements expressing opinions, sentiments, or conjectures are not considered valid inquires or comments and will not receive a response from GSA. Furthermore, offerors are reminded that GSA will not address hypothetical or scenario-based questions or questions aimed toward receiving potential “evaluation decisions” from GSA.

f) All volumes are to be prepared as separate files. Technical proposals must not contain any pricing information; do not cross-reference material submitted in the technical proposal with the price proposal, and vice versa. Information provided shall be concise, complete, and shall demonstrate a thorough understanding of the requirements as described in Attachment 2 of this solicitation. It is imperative that offerors thoroughly read and understand the Performance Work Statement when preparing and submitting proposals. Proposals that merely restate the government’s requirements or offer to conduct a program in accordance with the government’s requirements without going into further detail will not be considered acceptable and will not receive further consideration. Similarly, over generalizations and phrases such as “standard procedures will be employed” or “well-known techniques will be used” are also not acceptable.

g) Offerors are cautioned that the use of any format other than the one described in this section could result in the evaluation board’s inability to give maximum ratings.

h) When evaluating an offeror’s capability to perform the prospective contract, the government will also consider how well the offeror complied with proposal submission instructions. Offers should contain the contractor’s best terms from a technical and price standpoint.

i) Should the offer include any standard company terms and conditions that conflict with the terms and conditions of the solicitation, the offer may be determined “unacceptable” and thus ineligible for contract award. Should the offeror have any questions related to specific terms and conditions, these should be resolved prior to submission of the offer.

j) The government will not be liable for any costs associated with the development, preparation, transmittal, or presentation of any proposal or material submitted in response to this RFP. The proposal and all materials submitted by the offeror in connection with this RFP shall become the property of the government.

b) THE FOLLOWING LANGUAGE IS CHANGED IN ATTACHMENT 3 TO UPDATE THE NSN’S :

NSN’s 5180011147558, 7490013953355 and 7490013906163 are updated to reflect they are no longer mandatory sourced items.

c) THE FOLLOWING LANGUAGE IS INSERTED INTO ATTACHMENT 8 TO UPDATE THE NSN’S :

NSN’s 5180011147558, 7490013953355 and 7490013906163 are added to Attachment 8 with each having the following descriptions.

7490-01-390-6163 UI: EA

SHREDDING MACHINE, PAPER

DESCRIPTION

ITEM NAME SHREDDING MACHINE, PAPER:

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification, and shall not be more than 51 pounds in weight.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

Regulatory Requirements: The offerer/contractor is encouraged to provide energy-efficient products to the maximum extent practicable in accordance with paragraph 23.203 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

5180-01-114-7558 Ver: 11 UI: KT Status: Active AAC: J

TOOL KIT, MISSILE LAUNCHER

NSN Description:

Component Quantity: 18 Kit consists of one (1) each of the following eighteen (18) components and sizes:

List of Components of 5180-01-114-7558 :

133.1. 5120-00-240-8706 Ver: 16 UI: EA Status: Active AAC: J

EXTENSION, SOCKET WRENCH

KeyFields:

1AS4283 Ver: 4 SAE AS4283, HANDLES AND ATTACHMENTS FOR HAND SOCKET WRENCHES Shall be In Accordance With SAE Aerospace Standard: AS4283B - Handles and Attachments for Hand Socket Wrenches, dated December 2011

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Type II: Attachments Class 2: Bar, extension, solid Square Drive Size: 1/2 inch Material: Steel Coating: Chrome

EXCEPTION TO SPECIFICATION: Overall Length: 30 inches

133.2. 5120-00-900-6095 Ver: 14 UI: EA Status: Active AAC: H

HAMMER, HAND

KeyFields:

1-B107.54 Ver: 1 B107.400-2008 HEAVY STRIKING TOOLS In accordance with American Society of Mechanical Engineers (ASME) B107.54 as contained in ASME B107.400-2008; this document incorporates and includes the revisions of primary standard B107.41, B107.42, B107.53, B107.54, B107.56, and B107.58

NSN Description:

Overall Length: 35-1/4 inches Handle Length: 32 inches Head Weight: 6 pounds Handle Material: Fiberglass Features: Blacksmith's or Engineer's Double-Faced Hammer; Cushion Grip Handle

133.3. 6230-00-163-5136 Ver: 3 UI: EA Status: Active AAC: D

LIGHT, EXTENSION:

NSN Description:

In accordance with Commerical Item Description A-A-60006 Type II - General use Weatherproof with Number 16 AWG Type SO, SEO, OR STO CORD, without switch and without receptacle outlet; Class 2 - With Insulated Guard-Reflector Assembly; Length 50 Feet.

Exception(s) to Technical Document:

Use ASTM-B633 in lieu of QQ-Z-325, Zinc Coating, Electrodeposited.

133.4. 5120-00-249-1071 Ver: 28 UI: EA Status: Active AAC: H

HANDLE, SOCKET WRENCH

KeyFields:

1AS4283 Ver: 4 SAE AS4283, HANDLES AND ATTACHMENTS FOR HAND SOCKET WRENCHES Shall be In Accordance With SAE Aerospace Standard: AS4283B - Handles and Attachments for Hand Socket Wrenches, dated December 2011

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Type I: Handles Class 3: Speeder, brace type Square Drive Size: 1/2 inch Length: 18 inches Material: Steel Coating: Chrome

133.5. 5120-01-394-4253 Ver: 19 UI: EA Status: Active AAC: H

WRENCH, TORQUE

KeyFields:

2DISTRIBUTION D Ver: 1 DISTRIBUTION D STATEMENT REQUIREMENTS FOR DRAWINGS This item references a restricted DoD Distribution D drawing.

For all suppliers, Please contact the procurement officer for instruction on how to request the drawing.

2FEDDWG Ver: 2 MARK EACH TOOL IN A PERMANENT AND LEGIBLE MANNER WITH DRAWING Mark each tool in a permanent and legible manner with drawing number, manufacturer's name or identifying symbol, and country of origin

NSN Description:

In accordance with US Army Aviation and Missile Command Drawing Number 13661580, dated May 7, 2013

Part Number: 13661580-1

133.6. 5120-00-020-5635 Ver: 9 UI: EA Status: Active AAC: H

ADAPTER, TORQUE WRENCH

KeyFields:

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Square Drive Size: 1/2 inch External Maximum Torque Load: 2500 inch - pound Overall Length: 2-3/8 inches Overall Width of Drive End: 1-7/8 inches Drive Head Overall Height: 1-7/16 inches, includes drive tang Width of Dovetail End: 1-1/4 inches Thickness of Dovetail End: 13/16 inch Material: Steel Coating: Oxide Features: Wrench attachment to Sturtevant Richmont torque wrench Models CCM & LTC.;

Dovetailed, Pin-locked, Ratchet

133.7. 5120-00-240-5328 Ver: 55 UI: EA Status: Active AAC: H

WRENCH, ADJUSTABLE

KeyFields:

1B107.8 Ver: 3 B107.8 - ADJUSTABLE WRENCHES In accordance with American Society of Mechanical Engineers (ASME) B107.8 - 2003 stand alone standard or as contained in ASME B107.100-2010.

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Type I: standard openings Jaw Capacity: 0 to 61/64 inch maximum Overall Length: 8 inches Material: Steel Coating: Chrome

133.8. 5120-00-781-0819 Ver: 33 UI: EA Status: Active AAC: H

PLIERS, SLIP JOINT

KeyFields:

1B107.23 Ver: 6 B107.500-2010 MULTIPLE POSITION, ADJUSTABLE In accordance with American Society of Mechanical Engineers (ASME) B107.23 as contained in ASME B107.500-2010; this document incorporates and includes the revisions of primary standard B107.11, B107.13, B107.16, B107.18, B107.19, B107.20, B107.22, B107.23, B107.24, B107.25, B107.27 and B107.37.

NSN Description:

Type I: Adjustable joint, angle nose Class 1: multiple grooves and tongue Style A: straight, serrated jaws Overall Length: 12 inches Adjustable Positions: 7 Jaw Opening: 2-5/8 inches Material: Steel Features: Cushion Grip Handles

133.9. 5140-00-368-6326 Ver: 13 UI: EA Status: Active AAC: J

ROLL, TOOLS AND ACCESSORIES

KeyFields:

2FEDDWG Ver: 2 MARK EACH TOOL IN A PERMANENT AND LEGIBLE MANNER WITH DRAWING Mark each tool in a permanent and legible manner with drawing number, manufacturer's name or identifying symbol, and country of origin

NSN Description:

In accordance with U.S. Army Tank Auto Command drawing 12314263, dated 8/24/8133.

133.10. 5120-00-240-8716 Ver: 53 UI: EA Status: Archived AAC: H

SCREWDRIVER, CROSS TIP

KeyFields:

1B107.30 Ver: 6 B107.600-2008 CROSS TIP SCREWDRIVERS In accordance with American Society of Mechanical Engineers (ASME) B107.15 as contained in ASME B107.600-2008; this document incorporates and includes the revisions of primary standard B107.15, B107.26, B107.30, and B107.31

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Type I: Phillips (PH) Class 1: Plain Tip Size Designation: 1 Blade Length: 3 inches Overall Length: 6 inches minimum and 7 inches maximum Material, Blade: Steel Material, Handle: Plastic Coating: Chrome

133.11. 5120-00-236-2127 Ver: 37 UI: EA Status: Expired AAC: H

SCREWDRIVER, FLAT TIP

KeyFields:

1B107.15 Ver: 5 B107.600-2008 FLAT TIP SCREWDRIVERS In accordance with American Society of Mechanical Engineers (ASME) B107.15 as contained in ASME B107.600-2008; this document incorporates and includes the revisions of primary standard B107.15, B107.26, B107.30, and B107.31

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Type I: Cabinet, Straight Sides Tip Thickness: 0.03 inch Tip Width: 3/16 inch Blade Length: 3 inches Overall Length: 6-3/4 inches Material, Blade: Steel Material, Handle: Plastic Coating, Blade: Chrome

133.12. 5120-00-237-6985 Ver: 52 UI: EA Status: Archived AAC: H

SCREWDRIVER, FLAT TIP

KeyFields:

1B107.15 Ver: 5 B107.600-2008 FLAT TIP SCREWDRIVERS In accordance with American Society of Mechanical Engineers (ASME) B107.15 as contained in ASME B107.600-2008; this document incorporates and includes the revisions of primary standard B107.15, B107.26, B107.30, and B107.31

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Type II: General Purpose, Flared Sides Tip Thickness: 0.05 inch Tip Width: 3/8 inch Blade Length: 8 inches Overall Length: 13-1/4 inches minimum and 13-1/2 inches maximum Material Blade: Steel Material Handle: Plastic Coating: Chrome

133.13. 5120-00-237-0982 Ver: 33 UI: EA Status: Active AAC: J

SOCKET, SOCKET WRENCH

KeyFields:

1AS954 Ver: 12 AS954, WRENCHES, HAND 12 POINT HIGH STRENGTH, THIN WALL In accordance with Society of Automotive Engineers Aerospace Standard AS954G, Wrenches, Hand Twelve Point High Strength, Thin Wall, dated 2011

Exception to AS954G dated 2011:

Exception: Paragraph 3.7 Test Proof Loads, the following requirement shall be incorporated:

Torque shall be applied with a suitable torque producing machine. Torque shall be applied at a speed of 15 deg/min to 30deg/min until proof load value is achieved; test load shall be held for 10 seconds, then torque shall be released. This proof load test shall be performed in the clockwise and counter clockwise direction. .

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Type I: Sockets (12-Point) Class 1: Sockets Style A: Regular Length Square Drive Size: 1/2 inch Wrench Opening: 3/8 inch Material: Steel Coating: Chrome

133.14. 5120-00-242-3349 Ver: 32 UI: EA Status: Active AAC: H

SOCKET, SOCKET WRENCH

KeyFields:

1AS954 Ver: 12 AS954, WRENCHES, HAND 12 POINT HIGH STRENGTH, THIN WALL In accordance with Society of Automotive Engineers Aerospace Standard AS954G, Wrenches, Hand Twelve Point High Strength, Thin Wall, dated 2011

Exception to AS954G dated 2011:

Exception: Paragraph 3.7 Test Proof Loads, the following requirement shall be incorporated:

Torque shall be applied with a suitable torque producing machine. Torque shall be applied at a speed of 15 deg/min to 30deg/min until proof load value is achieved; test load shall be held for 10 seconds, then torque shall be released. This proof load test shall be performed in the clockwise and counter clockwise direction. .

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Type I: Sockets (12-Point) Class 1: Sockets Style B: Long Length Square Drive Size: 1/2 inch Wrench Opening: 3/4 inch Material: Steel Coating: Chrome

133.15. 5120-00-228-9510 Ver: 38 UI: EA Status: Active AAC: H

WRENCH, BOX AND OPEN END COMBINATION

KeyFields:

1AS954 Ver: 12 AS954, WRENCHES, HAND 12 POINT HIGH STRENGTH, THIN WALL In accordance with Society of Automotive Engineers Aerospace Standard AS954G, Wrenches, Hand Twelve Point High Strength, Thin Wall, dated 2011

Exception to AS954G dated 2011:

Exception: Paragraph 3.7 Test Proof Loads, the following requirement shall be incorporated:

Torque shall be applied with a suitable torque producing machine. Torque shall be applied at a speed of 15 deg/min to 30deg/min until proof load value is achieved; test load shall be held for 10 seconds, then torque shall be released. This proof load test shall be performed in the clockwise and counter clockwise direction. .

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Type II: Wrenches, Box (12-Point) Class 4: Combination, Box and Open End Wrench Style A: Regular Length Overall Length: 11 inches Wrench Openings: 3/4 inch both ends Material: Steel Coating: Chrome

133.16. 5120-00-020-5632 Ver: 8 UI: EA Status: Expired AAC: H

ADAPTER, TORQUE WRENCH

KeyFields:

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Wrench attachment to Sturtevant Richmont torque wrench Models CCM & LTC.

Dovetailed, Pin-locked

Square Drive Size: 1/2 inch, male Maximum Torque Load: 2500 inch-pounds Overall Length from Dovetail: 1-7/8 inches Overall Width of Drive End: 7/8 inch Width of Dovetail End: 1-1/8 inch Thickness of Dovetail End: 13/16 inch Material: Alloy Steel Coating: Oxide

133.17. 5120-00-235-5870 Ver: 36 UI: EA Status: Active AAC: H

SOCKET, SOCKET WRENCH

KeyFields:

1AS954 Ver: 12 AS954, WRENCHES, HAND 12 POINT HIGH STRENGTH, THIN WALL In accordance with Society of Automotive Engineers Aerospace Standard AS954G, Wrenches, Hand Twelve Point High Strength, Thin Wall, dated 2011

Exception to AS954G dated 2011:

Exception: Paragraph 3.7 Test Proof Loads, the following requirement shall be incorporated:

Torque shall be applied with a suitable torque producing machine. Torque shall be applied at a speed of 15 deg/min to 30deg/min until proof load value is achieved; test load shall be held for 10 seconds, then torque shall be released. This proof load test shall be performed in the clockwise and counter clockwise direction. .

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Type I: Sockets (12-Point) Class 1: Sockets Style A: Standard length Square Drive Size: 1/2 inch Wrench Opening: 11/16 inch Material: Steel Coating: Chrome

133.18. 5120-00-234-8913 Ver: 44 UI: EA Status: Active AAC: H

SCREWDRIVER, CROSS TIP

KeyFields:

1B107.30 Ver: 6 B107.600-2008 CROSS TIP SCREWDRIVERS In accordance with American Society of Mechanical Engineers (ASME) B107.15 as contained in ASME B107.600-2008; this document incorporates and includes the revisions of primary standard B107.15, B107.26, B107.30, and B107.31

2COATING Ver: 10 SAE AS 4984 COATING REQUIREMENT FOR AEROSPACE HAND TOOLS Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools.

NSN Description:

Type I: Phillips (PH) Class 1: Plain Tip Size Designation: 2 Blade Length: 4 inches Overall Length:7-3/4 inches minimum and 8-3/4 inches maximum Material, Blade: Steel Material, Handle: Plastic Coating: Chrome Features: Keystone Tip

133.19. 5120-00-022-9783 Ver: 13 UI: EA Status: Expired AAC: H

ADJUSTING AND RELEASE TOOL, TORQUE

NSN Description:

In accordance with General Services Administration Drawing number 022-9783, Revision A, dated January 19, 1977.

End Item Identification: Sturtevant Richmont LTC series torque wrenches Functional Description: Used to release and adjust torque setting

7490-01-395-3355 UI: EA

SHREDDING MACHINE, PAPER

DESCRIPTION

ITEM NAME SHREDDING MACHINE, PAPER

I.A.W. NSA / CSS SPECIFICATION 02-01

PACKAGING/PACKING

PACKAGING/PACKING: Each item shall be packaged in accordance with normal commercial practice and packed to assure acceptance by common carrier and to provide product protection against loss or damage during multiple shipments, handling and storage. The shipping container shall be in compliance with the National Motor Freight Classification and the Uniform Freight Classification.

For additional references, see below link:

https://vsc.gsa.gov/Marking_Labeling_Packaging/

MARKING

For civilian destinations - In accordance with FED-STD-123H, dated August 8, 2007. For military destinations - In accordance with MIL-STD-129R, dated February 18, 2014. Bar code marking shall be included for both civilian and military destinations.

For additional references, see below link:

FED-STD-123H

https://vsc.gsa.gov/administration/files/FEDSTD123H.pdf

MIL-STD-129R

http://www.dla.mil/Portals/104/Documents/LandAndMaritime/V/VS/Packaging/LM_MILSTD129R_151007.pdf

PALLETIZATION

PALLETIZATION & PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. If pallet or skid is used for shipping, it shall be made in accordance with normal industry standards. In the event a wooden pallet or skid is used for shipping, the following notice shall apply:

Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, Guidelines for Regulating Wood Packaging Material in International Trade . Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.

PCM

Regulatory Requirements: The offerer/contractor is encouraged to provide energy-efficient products to the maximum extent practicable in accordance with paragraph 23.203 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

THE GENERAL SERVICES ADMINISTRATION POLICY IS TO SEEK THE HIGHEST PERCENTAGE OF RECOVERED MATERIAL, INCLUDING POST CONSUMER RECOVERED MATERIAL, WHICH IS COMMERCIALLY AVAILABLE. PROCUREMENT PREFERENCE WILL BE GIVEN TO ITEMS WITH THE HIGHEST POST CONSUMER MATERIAL CONTENT WITHIN REASONABLE COST.

Regulatory Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable in accordance with paragraph 23.403 of the Federal Acquisition Regulations (FAR).

The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

QUALITY ASSURANCE

PRODUCT CONFORMANCE. The product provided shall meet the salient characteristics of this commercial item description. The quality of the product sold to the government shall be equal to or better than the quality of the product sold by the manufacturer in the commercial market. The government reserves the right to require proof of such conformance.

WORKMANSHIP: The material shall be uniformly fabricated in accordance with good commercial practice, and free from cracks, cuts, holes, chafed spots, or other defects which impair its usefulness. The material shall be free from dirt, contamination, mold release compounds, or other foreign matter.

END OF CONTINUATION PAGES