Wage_Det_WV35_2-9-18.pdf

General Decision Number: WV180035 02/09/2018 WV35

Superseded General Decision Number: WV20170035

State: West Virginia

Construction Type: Building

County: Cabell County in West Virginia.

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January

1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year

2018. The EO minimum wage rate will be adjusted annually.

Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date

0 01/05/2018

1 02/02/2018

2 02/09/2018

ASBE0002-002 08/01/2017

Rates Fringes

ASBESTOS WORKER/HEAT & FROST

INSULATOR........................$ 39.76 24.17

BOIL0667-005 01/01/2016

Rates Fringes

BOILERMAKER......................$ 37.63 23.53

BRWV0005-002 06/01/2017

Rates Fringes

BRICK POINTER/CAULKER/CLEANER....$ 29.55 24.24

BRICKLAYER.......................$ 29.55 24.24

BRWV0005-005 06/01/2017

Rates Fringes

MASON - STONE....................$ 29.55 24.24

4/5/2018https://wdol.gov/wdol/scafiles/davisbacon/WV35.dvb?v=2

BRWV0005-006 06/01/2017

Rates Fringes

TILE SETTER......................$ 29.55 24.24

BRWV0015-014 06/01/2017

Rates Fringes

TILE FINISHER....................$ 23.45 18.70

CARP0302-004 06/01/2017

Rates Fringes

CARPENTER (Including Drywall

Hanging, Form Work, and Floor

Laying - Carpet, Hardwood, Resilient and Vinyl).............$ 28.53 22.60

ELEC0317-003 06/01/2017

Rates Fringes

ELECTRICIAN......................$ 33.31 24.11

ENGI0132-010 12/01/2015

Rates Fringes

POWER EQUIPMENT OPERATOR:

GROUP 1.....................$ 36.36 19.23

GROUP 2.....................$ 36.01 19.23

GROUP 3.....................$ 35.01 19.23

GROUP 4.....................$ 24.51 19.23

GROUP 1: All Friction Cranes, Tower Cranes and all Cranes with 180 ft. or more of boom including mast and jibs or lifting capacity of 100 tons or more and hoists with 30,000 pound line pull or more, Mechanics with tools with 3/4 inch drive and below

GROUP 2: Operating Cranes and Tower Cranes with a lifting capacity of 15 tons and over

GROUP 3: Backhoe, Bulldozer, Excavator, Forklift, Non-Farm

Type Tractor, all other Cranes, all other Mechanics

GROUP 4: Bobcat/Skid Steer/Skid Loader, Farm Type Tractor, Loader, Roller

* IRON0549-006 12/01/2017

Rates Fringes

IRONWORKER (Ornamental)..........$ 39.34 19.64

IRON0769-009 06/01/2017

Rates Fringes

IRONWORKER (Reinforcing and

Structural)

ZONE 1:

0-10 miles from Union Hall.$ 31.33 23.97

ZONE 2:

10-50 miles from Union

Hall.......................$ 31.73 23.97

ZONE 3:

50 miles & over from

Union Hall.................$ 33.33 23.97

LABO0543-006 06/01/2017

Rates Fringes

LABORER..........................$ 25.41 16.75

LABORER CLASSIFICATIONS

Carpenter Tender, Common or General, Concrete Saw (Hand

Held/Walk Behind), Concrete Worker, Demolition, Grade

Checker, Jack Hammer, Landscape, Mason Tender-Brick, Mason

Tender-Cement/Concrete, Mortar Mixer, Motorized Buggy

Operator, Pipelayer, Scaffold Builder (Brick and Masonry), Skytrak Forklift Operator, Tamper (Hand Held), Water Boy, Wacker Roller Operator

PAIN0970-008 12/01/2017

Rates Fringes

PAINTER (Drywall

Finishing/Taping; Brush, Roller and Spray)................$ 27.82 16.80

PAIN1195-002 12/01/2017

Rates Fringes

GLAZIER..........................$ 28.33 14.11

PLAS0926-006 12/01/2015

Rates Fringes

CEMENT MASON/CONCRETE FINISHER...$ 29.01 17.99

PLASTERER........................$ 29.99 18.12

PLUM0083-004 07/01/2017

Rates Fringes

PIPEFITTER.......................$ 32.16 31.53

PLUM0565-004 07/01/2017

Rates Fringes

PLUMBER..........................$ 41.95 20.02

ROOF0034-003 05/01/2007

Rates Fringes

ROOFER...........................$ 19.35 7.75

SHEE0024-022 06/01/2015

Rates Fringes

SHEET METAL WORKER (Includes

HVAC Duct Installation)..........$ 27.71 23.18

TEAM0175-005 10/01/2017

Rates Fringes

Truck drivers:

GROUP 2.....................$ 28.39 16.27

GROUP 3.....................$ 28.54 16.27

TRUCK DRIVER CLASSIFICATIONS

GROUP 2 - Dump Truck (Up to 5 cu. yds.), Water Tank Truck

(Straight)

GROUP 3 - Dump Truck (5 cu. yds. & over), Tractor Haul Truck, Water Tank Truck (Semi)

* UAVG-WV-0026 01/01/2018

Rates Fringes

LABORER (Power Tool Operator)....$ 22.76 16.85

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the

Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses

(29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate

(weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or

"UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010

08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour

Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the

Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the

Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations

Wage and Hour Division

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator

(See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative

Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION