472-25256.JBB_DTMB0414 Construction Addendum #2_ISSUED_2026.04.24.pdf

DTMB-0414 (Rev 6/25)

DEPARTMENT OF TECHNOLOGY, MANAGEMENT AND

BUDGET

State Facilities Administration Design & Construction Division

CONSTRUCTION BID ADDENDUM NO. 2

This form identifies an Addendum to Bidding Documents, and incorporates interpretations or clarifications, modifications, acceptance of proposed “or equal” materials, and other information into the Bidding Documents. Addenda will be numbered by the Professional and distributed through www.michigan.gov/SIGMAVSS as an attachment.

TO:

ALL BIDDERS

DATE ISSUED

4/24/2026

PROJECT NAME

DTMB Alger Correctional Facility – Cooler/Freezer Replacement

FILE NUMBER

472/25256.JBB

PROFESSIONAL

U.P. Engineers & Architects, Inc.

PROJECT DIRECTOR

Jeff Barsch

BID OPENING DATE:

4/29/2026

ADDENDUM ITEMS: (attach additional sheets and drawings if required)

Item #1: The substitution request to use American Panel as an approved manufacturer is allowed, provided that the substitution meets or exceeds the basis of design. Final approval may be subject to shop drawing review.

Item #2: The substitution request to use Crown Tonka as an approved manufacturer is allowed, provided that the substitution meets or exceeds the basis of design. The request to use Bohn for the refrigeration equipment is allowed, provided that the substitution meets or exceeds the basis of design. Final approval may be subject to shop drawing review.

Item #3: Additional costs incurred as a result of any substitution shall be covered by the Contractor.

Item #4: To clarify the extent of Bid Alternate #1 – Provide pricing to connect the proposed cooler/freezer to the existing generator by means of updating the electrical requirements. These electrical requirements have been identified on sheet E100 – Overall Electrical Plan.

ACKNOWLEDGEMENT: This Addendum must be acknowledged by the Bidder in the space provided in the Bid Summary and Bid Form. Failing to acknowledge Addenda may be cause for the Bid to be rejected. Addenda will become part of the Contract Documents.

PROFESSIONAL: Reid Anderson, Project Manager DATE: 4/24/2026

APPROVED BY:

PROJECT DIRECTOR: Jeff Barsch DATE: 4/24/2026

Date: 4/17/2026

To: ALL BIDDERS Project: Alger Correctional Facility

Location: Mount Clemens MI

Item:

Attn: Quoted By: Jessica Hancock, Sales Associate

Email: Email: jessica@americanpanel.com

Phone: Fax: Mkt. Agent: 15 JM

Walk-In Details - Two Compartment (Rectangular) Temperature

Actual Ext. Dimensions: 50' - 0" X 17' - 6" X 10' - 0" high Freezer Int. Dimensions: 16' - 10" X 19' - 6" X 9' - 4.25" high -10° F Freezer Cooler Int. Dimensions: 16' - 10" X 29' - 5.875" X 9' - 4.25" high 35° F Cooler

Floor Configuration Floor Finish Freezer: Foamed-in-Place 4'' Urethane floor panels .125 Smooth Aluminum Cooler: Foamed-in-Place 4'' Urethane floor panels .125 Smooth Aluminum

Metal Finishes Exposed Exterior: .032 stucco aluminum Unexposed Exterior: .032 stucco aluminum

Interior Walls: .032 stucco aluminum Interior Ceiling: .032 stucco aluminum All panels are NSF 4" foamed-in-place urethane, UL classified with flame spread rating of 20.

Door Details Hinged Walk-In Door(s)

Qty. Description No Hinged Entrance Doors Requested. See Walk-In Accessories For Special Doors.

Walk-In Accessories Qty. Description

2 HPRV #1827 (3" diam.)

1 6'x7' Cooler Jamison MARK IV Manual Sliding Door. S/S front, 12"x14" window, 24" DATP kickplates 1 6'x7' Freezer Jamison MARK IV Manual Sliding Door. S/S front, 12"x14" window, 24" DATP kickplates 2 Intelligent Controller & Vapor Proof Light w/o APC Hinged Entrance Door 6 LED Light Fixture, Cooler & Freezer, 48" 2-lamp (-40°F or higher operating temp.)

234 Wall Protection (wainscot), 1/10" alum. treadplate 2 Flex. Strip Curtain, for Sliding Door

141 Closure Panel to match exterior box finish 2 Trim Strips, 3" x 3", to match Ext. Walk-in finish (except SS or Custom Color)

52 Roof Support Channel, indoor only 2 Security Cover (Small) for Sys. 100/200 with clear front panel 6 Security Cover (Large) for 48" Fluorescent Light 2 Tamperproof Screws for Prison

Refrigeration Design Criteria

Freezer Refrigeration Walk-In Location: Indoors Cond. Unit Location: Outdoors

Ambient Temp: 90° F Ambient Temp: 90° F Walk-In Temp: -10° F Freezer System Capacity: None Quoted

Walk-In Heatload: Located at altitude 990 ft. above sea level Vents: 2, Qty. of 2 System AWEF: n/a

Customer/Agent Page 1 of 2

14,552 BTUH

218135

American Panel Corporation

Website: http://www.americanpanel.com

Quote #:

Phone: (352) 245-7055 Toll Free: (800) 327-3015 Fax: (352) 245-0726

5800 S.E. 78th Street, Ocala, FL 34472-3412

Versatile, Dependable Walk-In Coolers & Freezers

Quality you can depend on...

from the inside out.TM

5800 S.E. 78th Street, Ocala, Florida 34472 • Phone: (800) 327-3015 • Fax: (352) 245-0726 • www.americanpanel.com or over half of a century American Panel Corporation has been dedicated to satisfying the cold storage needs of the industry’s most demanding customers. Our attention to superior quality, product versatility and customer service remains unequaled. American Panel is committed to the continued development of state-of-the-art foamed-in-place walk-in coolers and freezers.

FRP Door Perimeter & Frame

Reliable Performance Choose from our complete selection of high performance refrigeration equip-ment and accessories for the most efficient and reliable installation possible.

Our quality-engineered remote, remote quick connect, pre-assembled remote, deluxe pre-assembled remote or top/side quick connect self-con-tained units are available for any indoor or outdoor application.

Outstanding Value Considering the thoughtful design, efficient manufacturaing process, skilled crafts-manship, advanced features and customer support, you simply cannot find a better walk-in value than American Panel.

High Efficiency

Our foamed-in-place urethane is the premier insulating material currently available for walk-in construction. Operating costs are significantly reduced as a result of the high insulating values of panels manufactured with urethane insulation. Other desirable properties include structural rigidity, dimensional stability, uniform densi-ty and compliance with nationally accepted building codes.

Cam Lock & Floor Screed Lasting Durability

Space age materials like our fiberglass rein-forced polymer (FRP) door perimeter and frame are used to protect your investment for years to come. This FRP is a corrosion proof, impact resistant, non-conductive material that will not absorb moisture.

Moreover, it is superior to steel, vinyl, wood or other commonly used door and frame materials.

Cam Lock & Floor ScreedCam Lock & Floor ScreeCaCa

Insulation American Panel insulated panels are 4” thick high pressure impingement mixed (HPIM), foamed-in-place urethane expanded with HFC-245fa at a minimum of 2.3 lb. per cubic foot density, fully heat cured and bonded to the exterior metal finishes. The thermal conductivity (”K factor) is 0.1232 BTU/Hour/Square Foot/Degree Fahrenheit/Inch of Thick-ness. Overall coefficient of heat transfer (”U” factor) is less than 8.116 and the resistance to heat penetration (”R” factor) is not less than 32.46 for freezers or 29.04 for coolers.

over half of a century American Panel Corporation has been dedicated to satisfying the cold storage needs of the industry’s most demanding customers. Our attention to superior quality, product versatility and customer service remains unequaled. American Panel is committed to the continued development of state-of-the-art

Exceptional Appearance

Top quality commercial hardware, premi-um grade metal finishes and attention to manufacturing detail contribute to the overall appearance of the finished prod-uct. Whether used indoors or outdoors, for display purposes or general kitchen applications, American Panel walk-ins are always aesthetically pleasing.

Ultimate Flexibility Every American Panel walk-in is equipped with a full complement of standard accessories designed to meet the needs of a broad range of end users.

However, depending on your particular require-ments, you may wish to include additional options and features. We can provide every item for even the most sophisticated of applications.

Consistent Quality

Ours is perhaps the most thoroughly scrutinized production process in the industry. Our dedica-tion to zero defect manufacturing and product longevity produces a top quality, pre-tested walk-in that fits together precisely and ensures a lifetime of dependable service.

Cam Lock & Floor Screed

Consistent Quality

Ultimate Flexibility

Superior Strength

Optional heavy duty flooring is also avail-able. This heavy-duty structural flooring can support up to 15,000 pounds per square foot (static load) as tested in accordance with ASTM Standards.

Ca Lo & or Screeeed square foot (static load) as tested in accordance with ASTM Standards.

Funct

State of the Art Machinery State of the art machinery allows for the highest degree of precision. Each piece of sheet metal is programmed by an engineer and then fed to the machinery on the factory floor.

Double 90° bends at the long sides of the panel help to hold the metal to the foam within the panel. They also serve as an anchor point for the tear-drop gasket that forms the airtight seal on the walk-in.

Door Panel Section

Full Corner

Half “Tee” 1/ ” x 1/

” “Tee”

Ceiling Edge

Floor Edge

Half Corners

Full “Tee”

12” x 12”

Walls, Center Ceilings & Center Floors

34” Standard Net Opening

23”

12”

34 1/ ”, 46”, 57 1/

”, or 69”

Other Available Net Opening Widths - 24” to 57”

23” 17 3/

7 3/ ” up to 46”

6 1/

9 1/

9 1/ ” 9 1/

12”, 23 1/ ”, 35“, 46”

Widths

Modular Insulated Panel System

6 1/ ” x 12”

8 1/

12” x 6 1/

Functional Design

Virtually any cold storage requirement can be met using American Panel walk-ins. Restaurants, hospitality, correctional, healthcare, scientific, industrial, educational and large venues all have highly specialized needs. Rather than over-sell or under-sell, our desire is to provide equipment that exactly matches the job at hand. Experienced sales and engineering personnel are at your disposal to assist in the design of your next projects no matter how large or small the project or specialized the application.

Modular Design Flexibility

Monitoring Systems

Along with our high-tech manufacturing processes, American Panel is on the cutting edge with the proprietary monitoring systems that come stan-dard on every room. High and low alarm set points coupled with an audio/visual alert ensure your food product is safe and sound. Dowwnload HACCP data via a face mounted USB port.

Additional options and systems are available to add features like panic alarms, remote notification, dual temperature probes and WiFi connectivity..

Our modular panel system is the most comprehensive in existence, giving you the greatest degree of design flexibility possible. The system has evolved out of an industry-wide need for a more versatile array of standard panel sizes to maximize the amount of cold storage space.

The standard overall height for walk-ins with floors is 7’-6”. Additional heights are available and range from 5’-0” to 28’-0” in 1” increments.

Floorless walk-ins are supplied with 1 3/4” high vinyl floor screeds or floor angles.

Versatile, Dependable Walk-Ins and Blast Chillers A history of getting it right.

American Panel walk-ins have long been recognized for their reliable performance, lasting durability and exceptional value. Each cooler, freezer and refrigerated building is consistently delivered in spec, on schedule and within budget.

To ensure product quality, walk-ins are designed with the help of our experienced sales and engineering team. Our entire production staff is dedicated to zero-defect manufacturing throughout the facility, and every unit is pre-assembled in its entirety at the factory before shipping. This extra step guarantees that your system will function properly at your site, every time.

Count on the experience and craftsmanship of

American Panel to get it right on your next project.

You’ll feel the quality the moment you walk in.

WALK-INS

A name you can trust.

Since our founding in 1963, customers have relied on American Panel for our friendly and efficient customer service, thoughtful product design and superior craftsmanship. Our consistent, fair and honest way of doing business sets the benchmark for the industry today.

There’s no doubt that foodservice operators within the correctional field are faced with many unique challenges. While ensuring food quality, you must also protect against food theft and the vandalism of your valuable equipment. This is where we put our manufacturing experience to work for you. No matter the specific demands of your facility, our team will design and build the perfect unit to fit your needs.

WALK-INS

Versatile, Dependable Walk-Ins and Blast Chillers CORRECTIONAL www.americanpanel.com ... 5800 SE 78th Street Ocala, FL 34472 ... Phone: 800.327.3015 Fax: 352.245.0726

Versatile, Dependable Walk-Ins and Blast Chillers

ENVIRONMENTALLY FRIENDLY.

At American Panel, we are proud of our commitment to environmental sustainability. Through partnerships established with our valued customers and vendors, we will continually strive to manufacture products that comply with state and federal environmental standards, minimize environmental impact and conserve energy. Through pioneering advances in insulation technology, the utilization of more energy-efficient refrigeration components and effective waste management, we will remain dedicated to making responsible manufacturing a top priority.

APC-005 Correctional Market Brochure R3.indd 1 1/17/13 3:34 PM

Make American Panel quality your very own.

Every walk-in unit we manufacture is built to spec using superior materials, and is available with a wide selection of door locations and overall sizes. Within your fully custom configuration, you can choose from a variety of features and accessories that suit your specific needs. When your walk-in is complete, you’ll have the perfect balance of efficient insulation, cost-saving operation and maximized capacity.

At American Panel, we’re not just committed to building the best walk-in on the market. We’re driven to build the best walk-in for you.

Take a look at what makes American

Panel a true leader in the industry.

FEEL CONFIDENT

WITH EXTRA SECURITY.

Safety and security are extremely critical elements in the correctional foodservice field. That’s why

American Panel offers an array of time-tested features to ensure controlled access in these high-risk environments, while still delivering the quality and functionality our customers expect.

Our prison safety packages include tamper-proof screws, screened enclosures, door locking assemblies and around-the-clock monitoring systems. In addition, we manufacture our walk-ins to virtually any size or shape to utilize valuable floor space in these often crowded facilities.

From federal and state institutions to local jails, American Panel cold storage solutions deliver the ability to serve populations of any size while guaranteeing security at all times.

DEPENDABILITY.

AT THE HEART OF EVERY

WALK-IN WE BUILD.

American Panel’s complete line of energy-efficient refrigeration equipment is designed for easy installation and reliable performance. Capacities for each system are adjusted for specific ambient temperature, altitude and product load. Plus, our indoor or outdoor units are supplied with a wide selection of site-specific controls and accessories, and come standard with a five-year compressor warranty.

Standard on every unit, our multi-functional and fully programmable walk-in monitoring system helps safeguard your products while controlling energy consumption

Fiberglass reinforced polymer (FRP) door and frame perimeter is corrosion-proof, impact-resistant and will not absorb moisture

4”-thick foamed-in-place urethane construction provides superior insulating values, structural rigidity and total compliance with all nationally recognized building codes

Metal finishes, available in a wide variety of easy-to-clean colors and textures, provide for an attractive appearance and ultimate durability

Available in standard sizes or custom configurations with a full complement of application-specific accessories

APC-005 Correctional Market Brochure R3.indd 2 1/17/13 3:35 PM getting it right.

American Panel walk-ins have long been recognized for their reliable performance, lasting durability and exceptional value. Each cooler, freezer and refrigerated building is consistently delivered in spec, on schedule and within budget.

To ensure product quality, walk-ins are designed with the help of our experienced sales and engineering team. Our entire production staff is dedicated to zero-defect manufacturing throughout the facility, and every unit is pre-assembled in its entirety at the factory before shipping. This extra step guarantees that your system will function properly at your site, every time.

Count on the experience and craftsmanship of

American Panel to get it right on your next project.

You’ll feel the quality the moment you walk in.

A name you can trust.

Since our founding in 1963, customers have relied on American Panel for our friendly and efficient customer service, thoughtful product design and superior craftsmanship. Our consistent, fair and honest way of doing business sets the benchmark for the industry today.

There’s no doubt that foodservice operators within the correctional field are faced with many unique challenges. While ensuring food quality, you must also protect against food theft and the vandalism of your valuable equipment. This is where we put our manufacturing experience to work for you. No matter the specific demands of your facility, our team will design and build the perfect unit to fit your needs.

Versatile, Dependable Walk-Ins and Blast Chillers CORRECTIONAL www.americanpanel.com ... 5800 SE 78th Street Ocala, FL 34472 ... Phone: 800.327.3015 Fax: 352.245.0726

Versatile, Dependable Walk-Ins and Blast Chillers

ENVIRONMENTALLY FRIENDLY.

At American Panel, we are proud of our commitment to environmental sustainability. Through partnerships established with our valued customers and vendors, we will continually strive to manufacture products that comply with state and federal environmental standards, minimize environmental impact and conserve energy. Through pioneering advances in insulation technology, the utilization of more energy-efficient refrigeration components and effective waste management, Make American Panel quality your very own.

Every walk-in unit we manufacture is built to spec using superior materials, and is available with a wide selection of door locations and overall sizes. Within your fully custom configuration, you can choose from a variety of features and accessories that suit your specific needs. When your walk-in is complete, you’ll have the perfect balance of efficient insulation, cost-saving operation and maximized capacity.

At American Panel, we’re not just committed to building the best walk-in on the market. We’re driven to build the best walk-in for you.

Take a look at what makes American

Panel a true leader in the industry.

FEEL CONFIDENT

WITH EXTRA SECURITY.

Safety and security are extremely critical elements in the correctional foodservice field. That’s why

American Panel offers an array of time-tested features to ensure controlled access in these high-risk environments, while still delivering the quality and functionality our customers expect.

Our prison safety packages include tamper-proof screws, screened enclosures, door locking assemblies and around-the-clock monitoring systems. In addition, we manufacture our walk-ins to virtually any size or shape to utilize valuable floor space in these often crowded facilities.

From federal and state institutions to local jails, American Panel cold storage solutions deliver the ability to serve populations of any size while guaranteeing security at all times.

WALK-INSWALK-INSWALK-INS

DEPENDABILITY.

AT THE HEART OF EVERY

WALK-IN WE BUILD.

American Panel’s complete line of energy-efficient refrigeration equipment is designed for easy installation and reliable performance. Capacities for each system are adjusted for specific ambient temperature, altitude and product load. Plus, our indoor or outdoor units are supplied with a wide selection of site-specific controls and accessories, and come standard with a five-year compressor warranty.

Standard on every unit, our multi-functional and fully programmable walk-in monitoring system helps safeguard your products while controlling energy consumption

Fiberglass reinforced polymer (FRP) door and frame perimeter is corrosion-proof, impact-resistant and will not absorb moisture

4”-thick foamed-in-place urethane construction provides superior insulating values, structural rigidity and total compliance with all nationally recognized building codes

Metal finishes, available in a wide variety of easy-to-clean colors and textures, provide for an attractive appearance and ultimate durability

Available in standard sizes or custom configurations with a full complement of application-specific accessories

AT THE HEART OF EVERY

American Panel’s complete line of

APC-005 Correctional Market Brochure R3.indd 2 1/17/13 3:35 PM getting it right.

American Panel walk-ins have long been recognized for their reliable performance, lasting durability and exceptional value. Each cooler, freezer and refrigerated building is consistently delivered in spec, on schedule and within budget.

To ensure product quality, walk-ins are designed with the help of our experienced sales and engineering team. Our entire production staff is dedicated to zero-defect manufacturing throughout the facility, and every unit is pre-assembled in its entirety at the factory before shipping. This extra step guarantees that your system will function properly at your site, every time.

Count on the experience and craftsmanship of

American Panel to get it right on your next project.

You’ll feel the quality the moment you walk in.

A name you can trust.

Since our founding in 1963, customers have relied on American Panel for our friendly and efficient customer service, thoughtful product design and superior craftsmanship. Our consistent, fair and honest way of doing business sets the benchmark for the industry today.

There’s no doubt that foodservice operators within the correctional field are faced with many unique challenges. While ensuring food quality, you must also protect against food theft and the vandalism of your valuable equipment. This is where we put our manufacturing experience to work for you. No matter the specific demands of your facility, our team will design and build the perfect unit to fit your needs.

Versatile, Dependable Walk-Ins and Blast Chillers CORRECTIONAL www.americanpanel.com ... 5800 SE 78th Street Ocala, FL 34472 ... Phone: 800.327.3015 Fax: 352.245.0726

Versatile, Dependable Walk-Ins and Blast Chillers

ENVIRONMENTALLY FRIENDLY.

At American Panel, we are proud of our commitment to environmental sustainability. Through partnerships established with our valued customers and vendors, we will continually strive to manufacture products that comply with state and federal environmental standards, minimize environmental impact and conserve energy. Through pioneering advances in insulation technology, the utilization of more energy-efficient refrigeration components and effective waste management, 10 Year Warranty on Walk-In Panels American Panel insulated panel products are warranted for a period of ten (10) years after date of installation, but not longer than ten (10) years and three (3) months from date of original shipment, to the original user should the panel be installed properly and be used under normal service conditions.

This warranty does not include transportation or labor charges for making any in-warranty repairs and will not apply to equipment which has been subject to any accident, fire, negligence, alteration, abuse, misuse or damage in transit. After an inspection authorized by American Panel, should any part of our product prove to be defective in material or workmanship, it will be repaired or replaced free of charge F.O.B. factory. This warranty does not apply to accessories or components sold or supplied by us but manufactured by other companies who furnish their own warranties. In no event shall American Panel be liable for the loss of use, revenue or profit or for any other indirect, incidental, special or consequential damages including, but not limited to, losses involving food spoilage or product loss. There are no other warranties expressed or implied.

American Panel Warranty Statements

Versatile, Dependable Walk-ins & Blast Chillers www.americanpanel.com 5800 SE 78th St. Ocala, FL 34472 • 352.245.7055

APC_Walk-In_Warranty_02-22

5 Year Warranty on Compressors Compressors supplied by American Panel are warranted for a period of five (5) years after date of installation, but not longer than five (5) years and three (3) months from date of original shipment, to the original user within the United States of America and Puerto Rico. External electrical components, refrigerant and any part of the equipment other than the compressor are not included. This warranty does not include transportation or labor charges for making any in warranty repairs and will not apply to equipment. Which has been subject to any accident, fire, negligence, alteration, abuse, misuse, or damage in transit. If under normal conditions and after an inspection authorized by American Panel the original compressor proves to be defective in material or workmanship, this original compressor will be repaired or replaced free of charge F.O.B. factory. In no event shall American Panel be liable for the loss of use, revenue, or profit or for any other indirect, incidental, special or consequential damages including, but not limited to, losses involving food spoilage or product loss. The compressor replaced under this warranty shall be warranted for one (1) year from date of replacement. There are no other warranties expressed or implied.

1 Year Warranty on Parts Component parts supplied by American Panel are warranted for a period of one (1) year after date of installation, but not longer than one (1) year and three (3) months, to the original user. This warranty does not include transportation or labor charges for making any in-warranty repairs and will not apply to parts which have been subject to any accident, fire, negligence, alteration, abuse, misuse or damage in transit. If under normal conditions and after an inspection by American Panel the original component proves to be defective in material or workmanship, this component will be repaired or replaced free of charge F.O.B. factory. In no event shall American Panel be liable for the loss of use, revenue, or profit or for any other indirect, incidental, special or consequential damages including, but not limited to, losses involving food spoilage or product loss. There are no other warranties expressed or implied.

For questions or more information, contact us at:

PH: +1 352.245.7055 | E: service@americanpanel.com

L.J. ROLLS REFRIGERATION

Quotation

Quote #: E114614 Quote Date: 04/14/2026

Revision: 04/14/2026(#0)

Box description: Freezer

' 1

/2

30' 0"

66"W x 84"H NCPO, 4 1/4" sill

D01

V V 6830

TM

MD

AB

2' 0"22' 6"

RAL6E148DDARSFRAL6E148DDARSF

Room 1of 1 -10°F Holding Freezer E114614-01

4" walls, 4" ceiling, 4 1/4" Non-NSF Reinforced Manual and Electric Pallet Floor with 4 1/4" recess 134" high, foam rail, lag-down w/o fascia

Lock walls to floor Decking: single .75" plywood

Ext: St. Stl. Type 304 #4 finish 22 Ga.

Walls int: St. Stl. Type 304 #4 finish 22 Ga.

Ceiling int: Galvanized/Embossed White - 26 Ga.

Floor int: Aluminum/Smooth - .050 & .190 ATB (48" X 96") ship loose

Floor ext: Galvanized/Embossed - 26 Ga.

Stainless Steel 304 #4 PVC 16 GA (4X10)

□ Approved as submitted

□ NOT APPROVED – Revise and resubmit for approval

Before signing this document, verify that the content you are signing is correct.

X Accepted By:

Date:

Box description: Freezer -- Front elevation

360"

66"

/4

Box description: Freezer

Dimensions:

External (O.D.): 30' 0" x 17' 10 1/2" x 11' 2" - w x d x h Internal (I.D.): 29' 4" x 17' 2 1/2" x 10' 5 3/4" - w x d x h Volume: 5290 ft³ / E114614-01 Ceiling Load: 10 psf

Finishes

Walls: St. Stl. Type 304 #4 finish 22 Ga. - interior & exterior Floors: Aluminum/Smooth - .050 - interior Galvanized/Embossed - 26 Ga. - exterior Ceilings: Galvanized/Embossed White - 26 Ga. - interior St. Stl. Type 304 #4 finish 22 Ga. - exterior

Panel Thickness

Walls: 4" UL Listed Class 1 Foam Floors: 4.25" recessed UL Listed Class 1 Foam reinforced manual and electric pallet floor, designed to support 5,000 lb/ft² manual or electric pallet jack load and 10,000 lb/ft² uniform load with Aluminum Tread Brite .190 overlay (single layer of 3/4" underlayment with internal supports in floor)

Ceilings: 4" UL Listed Class 1 Foam

Qty Description Qty Description

Door D01

1 Everidge freezer sliding door, finished opening 66"W x 84"H, right slide

1 Interior finish - St. Stl. Type 304 #4 finish 22 Ga.

1 Exterior finish - St. Stl. Type 304 #4 finish 22 Ga. 1 Strip curtain 2 Vent - 115V Hi-Flow Heated Pressure Relief Port 4" (Kason

1832) 1 Flat Face Frame HDPE (Gray Plastic)

17 Lag Bolt (Zinc Plated) casing fasteners 1 Outside lever handle 1 Viewport Heated 14" X 14" Wire-Mesh Glass 1 Kick plate: 24" Aluminum Tread Brite .045 - interior and 24"

Aluminum Tread Brite .045 - exterior of door

Accessories

85 Caulk - Butyl (Tubes) 400 Non-Skid Floor Strips (Linear Feet) 1 Modularm 75LC (Temp Alarm/Light Control) (Un-Branded) 2 RFON400L4AEANT with -10°F R-454A 208-230/3/60 - FOB factory 2 RAL6E148DDARSF coil -10°F R-454A 208-230/1/60 - FOB factory 2 RFON400L4AEANT Warranty (Compressor-motor warranty extended to 5-years, part only, no labor) - FOB factory 2 A2L Safety Shut-off Valve (Part #8539580) - FOB factory 2 A2L Safety Check Valve (Part #8539556) - FOB factory

30 Wainscoting Exterior: 1248 - 48 ins high 10 ST. STL. TYPE 304 #4 FINISH 22 GA. 120" CEILING TRIM

60 SCREW 8 X 3/4 TRX BHS SECSMS SS 5 LIGHT LED 45W 48" EVERIDGE

49 LAG SCREW 3/8-7 X 8 HEX HEAD GRADE A 49 WASHER USS F/W 3/8 Z

Box description: Cooler

' 6

20' 0"

72"W x 84"H

NCPO

D01

V 6830

TM

MD

AB

1' 0"13' 0"

RAL6A141ADARSF

RAL6A141ADARSF

Room 1of 1 35°F Holding Cooler E114614-02

4" walls, 4" ceiling, floorless (On Grade) 120" high, foam rail, lag-down w/o fascia

Ext: St. Stl. Type 304 #4 finish 22 Ga.

Walls int: St. Stl. Type 304 #4 finish 22 Ga.

Ceiling int: Galvanized/Embossed White - 26 Ga.

S ta in le ss S te el

P V

C

G

A

4X

Stainless Steel 304 #4 PVC 16 GA (4X10)

Box description: Cooler -- Front elevation

240"

72"

6"

4"

0"

Box description: Cooler

Dimensions:

External (O.D.): 20' 0" x 17' 6" x 10' 0" - w x d x h Internal (I.D.): 19' 4" x 16' 10" x 9' 8" - w x d x h Volume: 3146 ft³ / E114614-02 Ceiling Load: 10 psf

Finishes

Walls: St. Stl. Type 304 #4 finish 22 Ga. - interior & exterior Ceilings: Galvanized/Embossed White - 26 Ga. - interior St. Stl. Type 304 #4 finish 22 Ga. - exterior

Panel Thickness

Walls: 4" UL Listed Class 1 Foam Ceilings: 4" UL Listed Class 1 Foam

Qty Description Qty Description

Door D01

1 Everidge cooler sliding door, finished opening 72"W x 84"H, left slide

1 Interior finish - St. Stl. Type 304 #4 finish 22 Ga.

1 Exterior finish - St. Stl. Type 304 #4 finish 22 Ga. 1 Strip curtain 1 Vent - Narrow Jamb Non-Heated Pressure Relief Port

(Kason 1825) 1 Flat Face Frame HDPE (Gray Plastic)

15 Lag Bolt (Zinc Plated) casing fasteners 1 Viewport Heated 14" X 14" Wire-Mesh Glass

Accessories

9 Caulk - Butyl (Tubes) 1 Modularm 75LC (Temp Alarm/Light Control) (Un-Branded) 1 RFON300E4AEANT with 35°F R-454A 208-230/3/60 - FOB factory 2 RAL6A141ADARSF coil 35°F R-454A 115/1/60 - FOB factory 1 RFON300E4AEANT Warranty (Compressor-motor warranty extended to 5-years, part only, no labor) - FOB factory 2 A2L Safety Shut-off Valve (Part #8539580) - FOB factory

2 A2L Safety Check Valve (Part #8539555) - FOB factory 31 Wainscoting Exterior: 1248 - 48 ins high 8 ST. STL. TYPE 304 #4 FINISH 22 GA. 120" CEILING TRIM 48 SCREW 8 X 3/4 TRX BHS SECSMS SS

4 LIGHT LED 45W 48" EVERIDGE 11 SEISMIC ANGLE - GALVANIZED SMOOTH 22 GA (1.5 X

2.75 X 96)

10 ALIGNMENT STRIP FOR 4" FOAM RAIL (96") 35 LAG SCREW 3/8-7 X 8 HEX HEAD GRADE A

35 WASHER USS F/W 3/8 Z 69 FASTENERS HILTI SCREW ANCHOR KH-EZ 1/4 X 1-7/8

Refrigeration

Condensing Unit for Holding Cooler - Refrigeration system is designed to maintain 35°F at 80°F ambient temperature around box and 95°F outdoor ambient temperature assuming products enter at 35°F with moderate traffic.

Manufacturer: HTPG - RUSSELL DOE Description: NEXT-GEN MINI-CON: A2L: NO DEFROST PROVISIONS (ECONET) Model: RFON300E4AEANT Horsepower: 3hp Extras:

Electrical: 208-230/3/60, RLA 13.7, MOPD 35, MCA 23.325 Conditions: BTUH: 27380 Room Temp: 35°F Ambient: 95°F Warranty: Compressor-motor warranty extended to 5-years, parts only, no labor

2 x Evaporator (Unit cooler) Manufacturer: HTPG - RUSSELL DOE Description: Air defrost LOW PROFILE WITH DUAL SPEED EC MOTOR - A2L - ECONET ENABLED coil Model: RAL6A141ADARSF Extras: None Electrical: 115/1/60, Fan amps 1.6, Defrost amps N/A pdvorak Rectangle

Disclosure:

All quotations and order shall be subject to CrownTonka, division of Everidge, Inc. standard terms and conditions notwithstanding any additional or contrary terms and conditions of Buyer. Such additional or contrary terms shall not bind Everidge unless accepted in writing even though such terms do not materially alter the terms hereof. No oral statements, warranties, stipulations, representations or terms shall have binding effect or be any part of the contract whatsoever. All orders must be in writing and will be binding when our order acknowledgement is mailed, faxed or emailed. If customer does not have a copy of these terms and conditions, please contact the customer service department.

Price quotations are valid for 30 days from quote date shown on printout.

Terms: subject to credit approval.

Quoted price DOES NOT include any applicable sales tax. Ask your customer service representative for a list of states in which sales tax is collected. If item is resale, a copy of your resale exemption certificate must be on file with CrownTonka prior to shipping, otherwise sales tax may be charged.

All shipments to IA are subject to use tax per the Iowa code. Resale certificates do not apply.

Lead Times vary depending on the production schedule. Please consult you customer service representative for an actual lead-time.

Structural or seismic calculations and materials are not included unless shown on quote or requested.

Refrigeration placement shown on plan view not for installation purposes - any installation to be done by refrigeration contractor or per the architectural plans.

We hope this quotation meets with your approval and if we can be of further assistance please do not hesitate to contact your customer service representative. Thank you for the opportunity to submit this quotation.

Please include the quotation reference number with all enquires pertaining to this document.

Sincerely, Customer Service Department

EVERIDGE, Terms & Conditions of Sale

1. Orders. Orders must be in writing, are binding only upon acceptance by Seller and must specify type and quantity of Product, specifications and, if Seller is to provide installation services, installation plans. Prices on all orders not shipped within 60 days of order may be subject to price increase.

2. Payments. Due in full 30 days after shipment. Past due invoices subject to interest at 1½% per month (18% per year). Seller may partial bill if Buyer delays shipment more than one week after product is manufactured, installation is not complete within one week after shipment or delivery is scheduled at weekly or greater interval. Seller may file material and mechanics liens and Buyer shall pay all costs and attorneys’ fees incurred if Seller initiates collection or legal proceedings. Terms of sale are subject to credit approval.

3. Delivery; Risk of Loss. Delivery dates are approximate and failure to meet estimated delivery dates is not grounds for cancellation.

Transportations costs will be invoiced to Buyer at cost plus handling. Risk of loss or damage from Seller’s factory or at an installation site is Buyer’s risk, whether or not Seller performs installation. Buyer shall verify condition, quantity and quality of Product, note on the freight bill any damage or shortage and immediately file a claim with carrier.

4. Changes. Change orders must be authorized by Seller in writing. Seller shall have the right to adjust price and completion date in the event of latent, concealed or unknown conditions which differ materially from description of installation. Cancelled orders are subject, in Seller’s sole discretion, to total invoice amount less freight, taxes, etc. or a restocking fee based on complexity and completeness of the order.

Products cannot be returned without Seller’s written permission. If permitted, Buyer shall pay all transportation charges.

5. Installation. Buyer shall provide all information, drawings, records, utility locations, documentation and specifications concerning Product and installation if installation is requested. Buyer is responsible for utilities, access to work, parking and storage areas and sanitation facilities, shall comply with all laws and regulations, shall cooperate with Seller on job site safety matters, shall coordinate installation performed by Buyer or its contractors so as not to interfere with or delay Seller’s performance. Buyer shall reimburse Seller for any additional cost caused by Buyer or its contractors or changes to Seller’s installation. Buyer shall maintain property insurance acceptable to Seller, naming Seller as a named insured.

6. Delays; Nonperformance. Seller shall not be liable for loss or damage due to delay or nonperformance in manufacture, delivery or installation resulting from any cause beyond Seller’s reasonable control.

7. IN NO EVENT SHALL SELLER BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES ARISING FROM DELAY OR FAILURE OF

DELIVERY OR INSTALLATION.

8. Taxes. Buyer is responsible for any sales, use, excise or similar tax arising from the sale Product or services. Buyer shall pay or reimburse Seller for any such taxes.

9. Limited Warranty. One year from date of installation by authorized representative, not to exceed one year and three months of original shipment to original Buyer as follows: (a) foamed-in-place panels free from defects in material and workmanship under normal use and service; (b) pre-painted surfaces free from paint failure under normal use and service; and (c) hardware and electrical components free from defects in material and workmanship under normal use and service. Limited Warranty does not apply to the refrigeration system.

Seller, at its option, will repair or exchange Products or parts covered by warranty. Buyer must notify Seller within 30 days of knowledge of problem or warranty is void. Buyer must obtain written authorization for return of Products. Limited Warranty does not include transportation costs, cost of removing defective parts or costs of reinstallation and does not apply to any Product or part subject to misuse, damage in transit, accident, negligence, alteration, improper installation or operation or to Product located outside the continental U.S. Limited Warranty does not apply to Product or parts supplied by Seller but manufactured by other companies. In no event shall Seller be liable for loss of use, revenue or profit or for any other indirect, incidental, special or consequential damages, including food spoilage, product loss or labor costs. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER WRITTEN OR ORAL, STATUTORY, EXPRESS, OR IMPLIED (INCLUDING ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND ALL WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE). This Limited Warranty is Seller’s sole and exclusive liability and Buyer’s sole and exclusive remedy, whether in tort (including negligence), strict liability or otherwise. This Limited Warranty is not transferable.

10 Indemnification. Buyer shall indemnify Seller and its employees and agents from any loss, damage or expense, including attorney’s fees, arising from or relating to transportation, installation, use or performance of any Product unless the claim arises directly from a Product defect covered by the Limited Warranty. Indemnification for employee claims shall not be limited by applicable worker’s compensation, disability or other employee benefit acts.

11. Governing Law; Variation of terms. The rights and obligations of Seller shall be governed by the laws of the State of Minnesota. No waiver, modification or addition to terms shall bind Seller unless agreed to in writing by Seller. The provisions hereof are intended to be a final expression of the agreement of Seller and Buyer and are intended as an exclusive statement of all terms applicable to Buyer’s order.

April 2012

PRODUCT

SPECIFICATIONS

SUBJECT:

POLYURETHANE K AND R

VALUES

DATE:

5-25-2016

REV:

NUMBER:

POLYURETHANE K AND R VALUES

Test Method: ASTM C518 – Steady-State Thermal Transmission Properties by Means of the Heat Flow meter Apparatus.

Tested at 75°F Mean Temperature for Non-Refrigerated Structures Tested at 55°F Mean Temperature for Coolers Tested at 20°F Mean Temperature for Freezers

K-Value: Thermal Conductivity per inch (BTU-in/h-ft²-°F) R-Value: Thermal Resistance per thickness (°F-ft²-h/BTU) U-Value: Overall heat transfer co-efficient R-Value is reciprocal of K-Value (R=1/K)

NON-REFRIGERATED COOLERS FREEZERS

MEAN TEMPERATURE 75°F 55°F 20°F

K-VALUE PER INCH .149 .139 .124

R-VALUE AT 1” 6.71 7.19 8.06

R-VALUE AT 3 ½” 23.49 25.18 28.21 (FLOOR)

R-VALUE AT 4” 26.85 28.78 32.24

R-VALUE AT 5” 33.56 35.97 40.30

R-VALUE AT 6” 40.29 43.17 48.36

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number R13780 Report Reference R13780-20200218

Issue Date 2020-FEBRUARY-18

Bruce Mahrenholz, Director North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

Issued to: Everidge, Inc.

15600 37th Ave N.

Suite 100 , Plymouth MN 55446

This certificate confirms that representative samples of

BUILDING UNITS

The product covered by this section of the Procedure is a building unit consisting of a urethane foamed plastic core with faces of painted or unpainted aluminum or steel. The tongue and groove joint edges are formed from high density foamed plastic. Adjoining finished panels are attached together by means of cam-locking devices incorporated into each finished panel.

Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.

Standard(s) for Safety: Standard for Surface Burning Characteristics for Building Materials, UL723

Additional Information: See the UL Online Certifications Directory at https://iq.ulprospector.com for additional information.

This Certificate of Compliance does not provide authorization to apply the UL Mark. Only the UL Follow-Up Services Procedure provides authorization to apply the UL Mark.

Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s Follow-Up Services.

Look for the UL Certification Mark on the product.

Page 1 of 8Page 1 of 8

BCH0035MCACY - SUBMITTAL

Project Name: Alger Correctional Facility

Quote ID: R4136633

Submitted For: Phil Dvorak

Submitted By: Dennis Krumm

Identity #: -

System Description: Split system

Project Location: US, MI

Item #: 1010

Submitted On: 04/16/2026

Submitted From: L J Rolls Refrigeration

Tag: -

System Tag: Cooler

For Record For Approval By:_____________________________________________ Date:_______________________

General Product Information

Product Family: HTS

Application: Outdoor

Temperature Range: Medium Temp

Voltage: (Volts/Ph/Hz) 208-230/3/60

Refrigerant Type: R454A

Piping: Standard

Compressor Brand: Copeland

Compressor Type: Scroll

Compressor Hp: 3.5

Compressor Model: YS24KAE

Number of Compressor(s): 1

Coil Type: Microchannel

Technical Information

Performance Data

Ambient

Temperature (°F)

Saturated Suction

Temperature (°F)

Application Capacity*

(BTU/H)

Altitude

(ft)

AWEF Value

95 23.23 30287.0 0 7.6

Electrical Data

Compressor(s) Fan Motor(s) Electric Ratings

RLA LRA Quantity Hp FLA Defrost

Type

High or

Low Amps?

Number of

Contactors

MCA MOPD Evap.Fan

Amps

Defrost

Heater

Amps

13.9 93 1 1/3 3.5 AIR DEFROST - - 20.9 30 10 30

Unit Specifications

Connections (in.) Receiver 90% Full (lbs)

Liquid Line Suction Standard Over Sized

Fan Blade(s)

Diameter

(in)

Sound Data

(dB)

Approx. Net

Weight

(lbs)

1/2 7/8 20 40 22 63 300

Dimensional Drawing(s)

Reid Anderson Highlight

Reid Anderson Highlight

Page 2 of 8Page 2 of 8

BCH0035MCACY - SUBMITTAL

Project Name: Alger Correctional Facility

Quote ID: R4136633

Submitted For: Phil Dvorak

Submitted By: Dennis Krumm

Identity #: -

System Description: Split system

Project Location: US, MI

Item #: 1010

Submitted On: 04/16/2026

Submitted From: L J Rolls Refrigeration

Tag: -

System Tag: Cooler

Standard Features

CABINET AND CONSTRUCTION

MICROCHANNEL COIL TECHNOLOGY STANDARD ON ALL UNITS•

PAINTED STEEL CABINETS FOR SUPERIOR STRENGTH AND CORROSION

PROTECTION

HEAVY DUTY, STEEL, 1-1/2” TALL BASE•

SERVICEABILITY

SUCTION SERVICE VALVES FOR HERMETIC AND SCROLL COMPRESSORS

LOCATED OUTSIDE THE CABINET FOR QUICK INSTALLATIONS.

RECEIVER WITH FUSIBLE PLUG, LIQUID SHUTOFF VALVE AND CHARGING PORT IS

STANDARD

LARGE ELECTRICAL PANEL FOR EASE OF ACCESS•

PREFABRICATED WIRING HARNESSES FOR TIGHT CRIMP CONNECTIONS AND

CONSISTENT LABELING

UNIT STAYS ON IF THE HOOD IS REMOVED FOR SERVICING•

SIGHT GLASS IS EASILY VIEWABLE•

QUALITY

ALL UNITS ARE COMPLETELY LEAK TESTED IN A HELIUM ENVIRONMENT, BUMP

TESTED AND ALLOWED TO CYCLE OFF ON THE HIGH AND LOW PRESSURE

CONTROL. EACH UNIT HAS A COPY OF THE RUN DATA SHIPPED INSIDE THE

ELECTRICAL PANEL

ELECTRICAL CIRCUITS ARE COMPLETELY CHECKED FOR CONTINUITY•

PIPING IS LAID OUT TO MINIMIZE STRESS AND VIBRATION AND IS PRE-BENT TO

ELIMINATE LEAKS

ENCAPSULATED, AUTO-RESET, HIGH AND LOW PRESSURE CONTROLS TO

ELIMINATE LEAKS (ADJUSTABLE LOW PRESSURE CONTROL STANDARD)

Options

Mounted Options

Brand Label - BOHN• Motor - VARIABLE SPEED EC•

Coil Selection - MICROCHANNEL COIL• Receiver Options - STANDARD W/ LOW AMBIENT KIT (HEATED/INSULATED RECEIVER

& LOW PRESSURE BYPASS TDR)

Defrost Timer Options - NO TIMER• Liquid Line Options - FILTER DRIER AND SIGHT GLASS•

Suction Line Options - FILTER AND ACCUMULATOR• Discharge Line Options - CHECK VALVE•

Cabinet Selection - Painted• Fused Disconnect - NO FUSED DISCONNECT•

Pressure Options - ADJUSTABLE LOW - FIXED HIGH• Crankcase Heater - CRANKCASE HEATER•

Phase Loss Monitor - NONE• Snow Legs - NONE•

Hail Guard Factory Installed - NONE•

Custom Options

Description Quantity

VARIABLE SPEED EC MOTOR WITHCONTROLLER 230V• 1

Minimum Unit Clearances

Notes

* Capacities shown are Application Capacities reflecting nominal operation at 10°F TD. For models within the scope of the DOE AWEF (Annual Walk-in Energy Factor) standard, the Net Capacity is determined by the AHRI 1250 test method. DOE will publish this compliance data at www.regulations.doe.gov

* Units using A2L refrigerants must be installed in accordance with UL 60335-2-89 and ASHRAE 15 standard

* Per ASHRAE Standard 15, fusible plugs and pressure relief valves may need to be externally piped when using flammable refrigerants

*Only refrigerants in compliance with New York state regulations can be used in the state of New York.

Page 3 of 8Page 3 of 8

BEL0295AY6AMAG0212 -

SUBMITTAL

Project Name: Alger Correctional Facility

Quote ID: R4136633

Submitted For: Phil Dvorak

Submitted By: Dennis Krumm

Identity #: -

System Description: Split system

Project Location: US, MI

Item #: 1020

Submitted On: 04/16/2026

Submitted From: L J Rolls Refrigeration

Tag: -

System Tag: Cooler

For Record For Approval By:_____________________________________________ Date:_______________________

General Product Information

Product Family: BEL

Defrost Type: Air

Voltage: (Volts/Ph/Hz) 115/1/60

Refrigerant Type: R454A

Minimum Room Area: (ft²) 63 ( 8.0ft height )

Motor type 2 SPEED EC

Number of Fans: 5

Fan HorsePower 1/20

Fins per Inch 6

Mitigation Zone: Volume

Technical Information

Performance Data

Capacity Air Flow

Air Throw (ft) AWEF Value

TD

(°F)

SST

(°F)

Application Capacity*

(BTU/H)

CFM

Fan Diameter

(in.) Standard w/Collar

Altitude

(ft) Cooler > 32 Freezer <= 32

9.77 23.23 31,000 3050 12 - - 0 9 N/A

Electrical Data

Fan Motor(s) Defrost Heater(s) Drain pan Heater(s) HG

Watts Amps Watts Amps Watts Amps

275 4.5 - - - -

Unit Specifications

Connections (in.)

Coil Inlet Suction External Equalizer Drain Side Port Hot Gas Drain Pan

Approx. Net

Weight

(lbs)

1/2 7/8 1/4 3/4 - - 115

Dimensional Drawing(s)

Page 4 of 8Page 4 of 8

BEL0295AY6AMAG0212 -

SUBMITTAL

Project Name: Alger Correctional Facility

Quote ID: R4136633

Submitted For: Phil Dvorak

Submitted By: Dennis Krumm

Identity #: -

System Description: Split system

Project Location: US, MI

Item #: 1020

Submitted On: 04/16/2026

Submitted From: L J Rolls Refrigeration

Tag: -

System Tag: Cooler

Standard Features

EASE OF INSTALLATION SERVICE

ALL ELECTRICAL COMPONENTS FACTORY WIRED TO TERMINAL BOARD AND

IDENTIFIED, MAKING IT EASY TO FIELD WIRE THE UNIT

CABINET DESIGN FEATURES HINGED, REMOVABLE FRONT ACCESS PANELS ON

EACH SIDE FOR EASY ACCESS TO ELECTRICAL AND REFRIGERATION

COMPONENTS

LIQUID LINE SOLENOID WIRE HARNESS IS FACTORY-INSTALLED FOR QUICK

INSTALLATION

MOTORS PLUG INTO WIRING HARNESS FOR EASIER SERVICING•

HINGED, REMOVABLE DRAIN PAN FOR EASY AND SAFE ACCESS•

PRE-DRILLED HOLES ON THE BACK OF THE UNIT FOR ROOM THERMOSTAT•

QUICK REMOVAL FAN GUARD/MOTOR ASSEMBLY FOR EASY SERVICE OR

REPLACEMENT OF AIR MOVER PARTS

PERFORMANCE

INTERNAL PANELS ARE ISOLATED FOR QUIET OPERATION•

INTERNALLY ENHANCED TUBING AND FIN DESIGN FOR HIGHER EFFICIENCY•

EC MOTORS STANDARD ON ALL MODELS FOR IMPROVED UNIT EFFICIENCY•

RELIABLE DURABLE

HEAVY GAUGE GRAINED ALUMINUM CABINET CLEANS EASILY AND LOOKS

ATTRACTIVE

MOLDED FAN GUARD AND ACCESS PANELS ARE MADE OF STRONG, DURABLE,

AND NSF AND UL SANITATION RATED PLASTIC MATERIAL

SWEAT…