4346-7905 MIL-S-22698 STEEL ORDERING DATA.pdf
PDF 11 KB Posted
- Attached to
- METAL PLATE Federal contract opportunity
- Solicitation number
- SPMYM225Q0678
About this file
This is a Material Ordering Data sheet (MIL-S-22698) specifying requirements for steel plate procurement. The document details the ordering requirements for weldable ordinary strength and higher strength structural steel plate, referencing MIL-S-22698C dated June 29, 1988, with subsequent amendments through December 29, 2020.
The specific requirements call for Grade D steel plate with Class U-mill finish (hot rolled or normalized), in dimensions of 2-1/2" thick, 60" wide by 20' long. No first article is required, and the surface finish must be Class U. Mill certification is required, and all containers must be marked according to MIL-STD-129 and DLA Procurement Note C20. The order is identified by IDN: N4523A 4346-7905 and ICN: 88MSM00001, and will be delivered to Defense Logistics Agency Land and Maritime.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 4346-7905 CHEMICAL and MECHANICAL CDRL.pdf | ||
| SPMYM225Q0678 METAL PLATE.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
MIL-S-22698
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 4346-7905
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 6.2 Ordering Data
A. MIL-S-22698C, STEEL PLATE, SHAPES AND BARS, WELDABLE ORDINARY STRENGTH AND
HIGHER STRENGTH: STRUCTURAL, dated 29 JUN 1988. AMENDMENT 1, dated 19 DEC 1988.
AMENDMENT 2, dated 20 OCT 1994. NOTICE 1, dated 8 SEP 1998. NOTICE 2, dated 30 AUG 2002.
NOTICE 3, dated 29 DEC 2020.
B. Grade specified: D
C. Class required: Class U-mill finish (hot rolled or normalized)
D. Plate Size: 2-1/2" THK, 60" WD X 20' LG.
E. When first article is required: no
F. Dimensional tolerances required: N/A
G. When chemical composition is other than specified: N/A
H. When surface finish is other than Class P: CLASS U
I. Deviations in UT inspection method or UT acceptance criteria from Appendix A of grade T plate, shapes, and bars: N/A
J. Level of preservation, packing, and marking required: per spec
Additional Data Requirements:
MILL CERTIFICATION REQUIRED
All unit, intermediate and shipping containers must be marked in accordance with MIL-STD-
129. Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Willie Leach Code: 244.4
File details come from the government source that posted it. Updated .