00-224-3091 - MIL-S-22698_Redacted.pdf
PDF 94 KB Posted
- Attached to
- METAL PLATE Federal contract opportunity
- Solicitation number
- SPMYM223Q2000
About this file
This document is a material ordering data sheet specifying steel plate, shapes and bars to be procured under solicitation number SPMYM223Q2000 for a metal plate contract opportunity with the Defense Logistics Agency Land and Maritime. The ordering data sheet specifies grade DH-36 steel plate with a U-mill finish to be provided in accordance with specification MIL-S-22698C including amendment 2. The certified mill test report required by the contract must include certification and quality conformance requirements of paragraph 4.1.2 of the specification. No first article, dimensional tolerances, or deviations from surface finish or ultrasonic inspection acceptance criteria are required beyond those outlined in the specification.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPMYM223Q2000 EXTENSION SAM.pdf | ||
| SPMYM223Q2000.pdf | ||
| 00-224-3091 - CERTIFIED MILL TEST REPORT (CMTR) CDRL DI-MISC-82386 10-01-22.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
IDN: N4523A 3213-7014
ICN: KO: KOI:
Paragraph 6.2 Ordering Data
A. TITLE: STEEL PLATE, SHAPES AND BARS, WELDABLE, ORDINARY STRENGTH AND
HIGHER STRENGTH: STRUCTURAL MIL-S-22698C of 29 JUNE 1988, INCLUDING AMENDMENT 2
OF 20 OCTOBER 1994; REINSTATEMENT NOTICE 2, 30 AUG 2002
B. Grade specified: DH-36 C. Class required: U-mill finish (hot rolled or normalized) D. When first article is required: no E. Dimensional tolerances required: NOT REQUIRED F. When chemical composition is other than specified: N/A G. When surface finish is other than Class P: N/A H. Deviations in UT inspection method or UT acceptance criteria from Appendix A of grade T plate shapes and bar: N/A I. Level of preservation, packing, and marking required: per spec
Additional Data Requirements:
00-224-3091
The Certified Mill Test Report (CMTR) required by the contract shall include the Certification and Quality Conformance requirements of paragraph 4.1.2.
File details come from the government source that posted it. Updated .