41013_-_Scope_of_Work_.pdf
PDF 307 KB Posted
- Attached to
- DHA Bell Street New Surveillance System
- Solicitation number
- 41013
- Issued by
- Sacramento County, San Francisco City, California
About this file
This Scope of Work document pertains to an electronic security services project for the County of Sacramento, California at the DHA facility located at 1825 Bell Street, Sacramento. The project involves installing a new surveillance system with the following components: ten P3737-PLE Axis multi-sensor cameras with wall/pole mounts and pendant mounts, six P3277-LV Axis dome cameras, one P1487-LE Axis bullet camera, two Gridless Power Sentry battery/POE kits with associated pole mount kits and AC chargers, two KBC wireless network P2P kits, one spare CAT 6 cable, four Rack Solutions shelf kits for server rooms, five ExacqVision Enterprise camera licenses, and comprehensive cabling, connectors, patch cords, conduit, and hardware. The successful vendor must be a Certified ExacqVision Select or Elite Dealer with an office located within 50 miles of the job site, and all work must be completed during normal business hours with programming and final acceptance testing performed by the vendor in coordination with County Electronic Security Services personnel.
The contract requires a minimum one-year warranty from the date of acceptance and mandates performance and payment bonds for contracts exceeding $6,500 and $25,000 respectively, each at one hundred percent of the contract price. As this is a California public works project, prevailing wage requirements apply pursuant to California Labor Code sections 1720 and 1770, with wage determinations available through the Department of Industrial Relations. All contractors and subcontractors must be registered with the California Department of Industrial Relations per Labor Code section 1725.5 for contracts awarded on or after April 1, 2015. The project is subject to the County's Labor Compliance Program and compliance monitoring by the Department of Industrial Relations. The vendor is solely responsible for all installation debris removal, damaged ceiling tile replacement, and ensuring all work meets local government and County standards, with final system acceptance contingent upon satisfactory completion of these requirements.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Electronic Security Services
Brian Ames 3700 Branch Center Road, Suite D, Sacramento, CA 95827
Office: 916.875.3049 amesb@saccounty.net
1 | P a g e
DHA
1825 Bell Street
Sacramento, CA 95825
Project Overview
Install New Surveillance System.
Scope of Work
- Provide & Install (10) P3737-PLE Axis Multi-Sensor Cameras, (10) T91L61 Axis Wall/Pole Mounts, (10) T94N01D Axis Pendant Mounts, and (3) T91A64 Axis Corner Brackets at locations designated on drawing.
- Provide & Install (6) P3277-LV Axis Dome Cameras at locations designated on drawing.
- Provide & Install (1) P1487-LE Axis Bullet Camera at location designated on drawing.
- Provide & Install (2) GS1-000-3 Gridless Power Sentry 1 Battery / POE Kits, (2) GSX-001 Gridless Power Pole Mount Kits, (2) GSX-AC-HV Gridless Power Pole Mount AC Chargers, and (2) GS-LIC-1Y Gridless GMS 1 Year License at locations designated on drawing.
- Provide & Install (2) WES5-KT KBC Wireless Network P2P Kits at locations designated on drawing.
mailto:amesb@saccounty.net
3700 Branch Center Road, Suite D, Sacramento, CA 95827
Office: 916.875.3049 amesb@saccounty.net
2 | P a g e
- Provide and Install (1) Spare CAT 6 cable for future use from Server Room to location on drawing. Leave above coiled above ceiling.
- Provide & Install (2) 3USHL-022FULL-29DV Rack Solutions 29” 2 Post Shelf Kits, and (2) 2USHL-022FULL-20DV Rack Solutions 20” 2 Post Shelf Kits in the Server Rooms.
- Provide (5) EVENIP-01 ExacqVision Enterprise Camera Licenses
- Provide labor to Install customer provided equipment:
• (2) ExacqVision NVRs
• (2) KVM Monitor Consoles
• (2) DLINK Switches
• (2) Altronix Midspans
• (2) APC UPS Battery Backup
- Provide & Install all cabling, connectors, patch cords, conduit, and hardware necessary for the installation of the above system.
Specifications
1. The prospective Vendor shall be a Certified ExacqVision Select or Elite Dealer.
2. Customer provided equipment installed above will not be covered under the warranty provided by the vendor.
3. Work to be completed during normal business hours.
3700 Branch Center Road, Suite D, Sacramento, CA 95827
Office: 916.875.3049 amesb@saccounty.net
3 | P a g e
4. The prospective Vendor shall have an office located within a 50-mile radius of the job site.
5. Programming to be completed by vendor.
6. Lifts, if required, will not be provided by County.
7. High Voltage Power connections at light poles to be provided by Property Management.
8. All new interior devices will be wired with Cat 6 wire, plenum rated cable, white or orange in color.
9. All exterior devices using underground pathways shall require Cat 6 direct burial rated cable.
10. All cables must be properly supported per industry standards.
11. All cables will be tested after cable has been installed and terminated. These wires will be installed, dressed and labeled to meet local Government and County Standards.
12. Factory spec. patch cords will be used to connect midspan to network switch using white or orange colored patch cables of Cat6 or equivalent.
13. All cameras are to be installed utilizing the manufacturer’s recommended mounting technique/hardware. All indoor cameras that are mounted to ceiling tiles shall be secured or braced to safeguard against tile failure.
14. All cameras will be labeled with the last three digits of its IP address.
15. The Installation Company will properly caulk all holes created to pull wiring through fire rated walls and/or corridors.
3700 Branch Center Road, Suite D, Sacramento, CA 95827
Office: 916.875.3049 amesb@saccounty.net
4 | P a g e
16. The Installation Company is solely responsible for all damaged or broken ceiling tiles. A pre-inspection is recommended before the start of work. An inspection will also be done upon completion of work to verify broken/damaged tiles have been replaced. Final system acceptance is dependent upon replacement of damaged/broken ceiling tiles.
17. The Installation Company is solely responsible for all debris related to the installation of the above systems and will be responsible for removing all debris from the site.
18. A final acceptance test will be performed by the Installation Company with County Electronic Security Services personnel.
19. A warranty period of no less than one (1) year from the date of acceptance is required.
3700 Branch Center Road, Suite D, Sacramento, CA 95827 Office: 916.875.3049 amesb@saccounty.net
5 | P a g e
BONDS: The successful bidder shall be required to execute a material and labor Payment Bond and Performance Bond, issued by a corporate surety, acceptable to the County of Sacramento, each for not less than one hundred percent (100%) of the contract price.
Bond requirements apply as follows: for contracts where the total project cost is in excess of $6,500 the Contractor shall be required to provide a Performance Bond. For contracts for which the total project cost is greater than or equal to $25,000 the Contractor shall be required to provide a Payment Bond. The costs for securing these bonds are borne by the Contractor.
Pursuant to Public Contract Code, section 22300, the Contractor may, at its own expense, substitute securities for any money being withheld by the County to ensure performance under this contract. The Contractor must notify the County of its intent to pursue this option prior to the issuance/execution of a contract.
LABOR COMPLIANCE PROGRAM: The County of Sacramento received final approval from the Director of California Department of Industrial Relations as a Labor Compliance Program effective March 15, 1994. All questions regarding this Labor Compliance Program should be directed to the Labor Compliance Section at 916-875-2700. This is a construction project in accordance with Section 1771.5 of the California Labor Code. Pursuant to California Labor Code Section 1720 and following, and Section 1770 and following, the successful bidder shall pay not less than the prevailing rate of per diem wages as determined by the Director of the California Department of Industrial Relations.
Copies of the prevailing wage determinations are on file in the office of the Clerk of the Board of Supervisors, Suite 2450, 700 H Street, Sacramento, California 95814 and at http://www.dir.ca.gov/OPRL/PWD/
Important Information for Contractors and subcontractors regarding SB 854. SB 854 (Stat. 2014, chapter 28) made several changes to the laws governing how the Department of Industrial Relations (DIR) monitors compliance with prevailing wage requirements on public works projects.
• No contractor or subcontractor may be listed on a bid proposal for a public works project (submitted on or after March 1, 2015) unless registered with the Department of Industrial Relations pursuant to Labor Code section 1725.5 [with limited exceptions from this requirement for bid purposes only under Labor Code section
1771.1 (a)].
• No contractor or subcontractor may be awarded a contract for public work on a public works project (awarded on or after April 1, 2015) unless registered with the Department of Industrial Relations pursuant to Labor Code section 1725.5.
• This project is subject to compliance monitoring and enforcement by the Department of Industrial Relations.
http://www.dir.ca.gov/OPRL/PWD/
| DHA |
| 1825 Bell Street |
| Sacramento, CA 95825 |
File details come from the government source that posted it. Updated .