Specifications.pdf

Purchase of Thirty-eight (38) Interior Hollow Metal Doors per specifications for DOI, Bureau of Indian Affairs, Rosebud Agency, Bldg#1004, located at 1004 Omaha Street, Mission, SD 57555. DOI, BIA personnel will be completing installation of all doors.

Measurements: Measurements provided. Door dimensions are to fit existing door frames. Door frames will not be replaced.

Sixteen (16) 32” Wide (RH) Right Hand Swing-In;

Fifteen (15) 32” Wide (LH) Left Hand Swing-In;

Total = (31) 32” Wide HM Doors

Three (3) 36” Wide (RH) Right Hand Swing-In;

One (1) 36” Wide (LH) Left Hand Swing-In;

Two (2) 36” Wide (LHR) Left Hand Swing-Out

One (1) 36” Wide (RHR) Right Hand Swing-Out

Total (7) 36” Wide HM Doors

All Doors must meet the following specifications, includes all accessories and any freight charges:

• HM CRS Doors shall be formed from two 18 gauge A60 Galvannealed Steel per ASTM A924 and A653 and shall be 1-3/4″ thick.

• CRS doors shall be formed from two 16 or 18 gauge A60 Galvannealed steel per ASTM A924 and A653 and shall be 1-3/4″ thick.

• All hinge reinforcements shall be 3/16″ thick. Door hinges are 4 hole with a screw pattern.

• All doors shall be internally reinforced with a 12 gauge plate on both sides of the door for application of surface applied door closures and holders.

• Glass light molding shall be Pioneer standard steel molding, with no exposed screws on the secure side of door.

• All doors shall be manufactured in accordance with UL or WHI procedures and bear the appropriate classification mark (label) with reference to temperature rise at 30 minutes of 250 F or 450 F as required.

• Door construction shall comply with ANSI A250.8-2003 (SDI 100)

• Hardware reinforcements shall be in accordance with ANSI A 250.6-2003. Locations shall be in accordance with

ANSI/BHMA A156.115

• Doors shall have one coat of baked-on rust inhibitive metal primer in compliance with ANSI A250.10-2004.

Doors should then be painted one color on both sides. Final paint color to be selected by contractor.

• Standard 345/161, Hinge & Lock Preps

• Top of Door to top of hinges: 4-7/8”, 37-1/8”, 69-3/8”

• Top of Door to centerline of lock: 41-7/8”

• Hager 5200 x ALM x MLT/Adj 1-6 Door Closures

• Hager 3553 x WTN x US26D x 2-3/4 x ASA X SCC-KD Entrance Lever Lockset

• Hager ECBB1100 4.5 x 4.5 US26D Ball Bearing Hinges

• Hager 190S 10 x 34 US32D Kick Plate

• Steel Lite Kit – VSL – 6 x27 – Bronze – ¼” Glass, 1-3/4” Thick Door

• 5 x 26 x ¼” Clear Tempered Glass

• Rekey Standard Key Cylinder