40023-S25002.pdf

INVITATION TO BID

SOLICITATION NO: 40023-S26002

ISSUE DATE: APRIL 10,2025

* FILL IN VENDOR NAME AND

ADDRESS ABOVE BEFORE SUBMITTING

VENDOR NAME AND ADDRESS:

RETURN BID AS PDF TO THE EMAIL

ADDRESS LISTED BELOW:

NORTHSHORE TECHNICAL

COMMUNITY COLLEGE

LACOMBE – STEM CAMPUS

65556 CENTERPOINT BLVD

TAMMANEND BUSINESS SUBDIVISION

LACOMBE, LA 70445

Purchasing Manager: Richard Butler

EMAIL:RichardButler@NorthshoreCollege.edu

PHONE: 985-545-1243

FAX:985-545-1281

FISCAL YEAR: 26

State General Fund

BID CLOSING DATE AND TIME:

MAY 1,2025 11:00 AM

23271800 Welding and soldering and brazing supplies

INSTRUCTIONS TO BIDDERS

1. READ THE ENTIRE BID, INCLUDING ALL TERMS AND CONDITIONS AND SPECIFICATIONS.

2. FILL IN ALL BLANK SPACES

3. ALL BID PRICES MUST BE TYPED OR WRITTEN IN INK. ANY CORRECTION, ERASURES OR OTHER FORMS OF

ALTERATION TO UNIT PRICES SHOULD BE INITIALIZED BY THE BIDDER.

4. BIDS CONTAINING “PAYMENT IN ADVANCE”/ “C.O.D.” REQUIREMENTS MAY BE REJECTED. PAYMENT IS TO

BE MADE WITHIN 30 DAYS AFTER RECEIPT OF PROPERLY EXECUTED INVOICE OR DELIVERY, WHICHEVER

IS LATER.

5. SPECIFY YOUR PAYMENT TERMS: _______________________________________. CASH DISCOUNTS FOR LESS

THAN 30 DAYS OR LESS THAN 1% WILL BE ACCEPTED, BUT WILL NOT BE CONSIDERED IN DETERMINING

AWARDS.

THE BIDDER CERTIFIES:

• COMPLIANCE WITH ALL INSTRUCTIONS TO BIDDERS, TERMS, CONDITIONS, AND SPECIFICATIONS.

• THIS BID IS MADE WITHOUT COLLUSION OR FRAUD.

• THAT IF MY BID IS ACCEPTED WITHIN ________ DAYS FROM BID CLOSING TIME, MY FIRM WILL

FURNISH ANY OR ALL OF THE ITEMS (OR SECTIONS) AT THE PRICE OPPOSITE EACH ITEM (OR SECTION)

• DELIVERY WILL BE MADE WITHIN ______________ DAYS AFTER RECEIPT OF ORDER.

• BIDS SUBMITTED ARE SUBJECT TO PROVISIONS OF THE LAWS OF THE STATE OF LOUISIANA

INCLUDING BUT NOT LIMITED TO L.R.S. 39:1551-1736; PURCHASING RULES AND REGULATIONS;

EXECUTIVE ORDERS; STANDARD TERMS AND CONDITIONS; SPECIAL CONDITIONS; AND

SPECIFICATIONS LISTED IN THIS SOLICITATION.

• IMPORTANT: BY SIGNING THE BID, THE BIDDER CERTIFIES COMPLIANCE WITH ALL INSTRUCTIONS TO

BIDDERS, TERMS, CONDITIONS AND SPECIFICATIONS, AND FURTHER CERTIFIES THAT THIS BID IS

MADE WITHOUT COLLUSION OR FRAUD. THIS BID IS TO BE MANUALLY SIGNED IN INK BY A PERSON

AUTHORIZED TO BIND THE VENDOR. ALL BID INFORMATION SHALL BE MADE WITH INK OR

TYPEWRITTEN.

VENDOR TELEPHONE NUMBER: ______________________ TITLE: ________________________________________________________

DATE: ______________________________________________ EMAIL: __________________________________________________________

FAX NUMBER: _______________________________________ SIGNATURE: ______________________________________________________

1 ADDRESS ALL INQUIRIES AND CORRESPONDENCE TO THE BUYER AT THE PHONE AND ADDRESS

SHOWN ABOVE.

2 BID FORMS: ALL WRITTEN BIDS, UNLESS OTHERWISE PROVIDED FOR, MUST BE SUBMITTED ON

AND IN ACCORDANCE WITH, FORMS PROVIDED, PROPERLY SIGNED BIDS.

3 BIDS MUST BE RECEIVED AT THE ADDRESS SPECIFIED IN THE SOLICITATION PRIOR TO BID OPENING TIME IN ORDER TO BE CONSIDERED. BID OPENING: BIDDERS MAY ATTEND THE BID OPENING, BUT NO INFORMATION OR OPINIONS CONCERNING THE ULTIMATE CONTRACT AWARD WILL BE GIVEN AT THE BID OPENING OR DURING THE EVALUATION PROCESS. BIDS MAY BE EXAMINED WITHIN 72

HOURS AFTER BID OPENING.

4 AWARDS: NTCC RESERVES THE RIGHT TO AWARD ITEMS SEPARATELY, GROUPED OR ON AN ALL- OR-NONE BASIS AND TO REJECT ANY OR ALL BIDS AND WAIVE ANY INFORMALITIES. NTCC RESERVES THE RIGHT TO REMOVE LINE ITEMS FROM THE AWARD WITH 30 DAY NOTICE WHEN IT IS DEEMED TO BE TO

THE BEST INTEREST OF THE STATE.

5 PRICES: UNLESS OTHERWISE SPECIFIED BY NTCC IN THE SOLICITATION, BID PRICES MUST BE COMPLETE, INCLUDING TRANSPORATION/SHIPPING PREPAID BY BIDDER TO DESTINATION AND FIRM FOR ACCEPTANCE FOR A MINIMUM OF 30 DAYS. PRICES SHOULD BE QUOTED IN THE UNIT (EACH, BOX, CASE, ETC) AS SPECIFIED IN THE BID.

6 DESCRIPTIVE INFORMATION: BIDDERS PROPOSING AN EQUIVALENT BRAND OR MODEL SHOULD

SUBMIT WITH THE BID INFORMATION (SUCH AS ILLUSTRATIONS, DESCRIPTIVE LITERATURE, AND TECHNICAL DATA) SUFFICIENT FOR NTCC TO EVALUATE QUALITY, SUITABILITY, AND COMPLIANCE WITH THE SPECIFICATIONS IN THE SOLICITATION. FAILURE TO SUBMIT DESCRIPTIVE INFORMATION MAY

CAUSE BID TO BE REJECTED.

7 CONTRACT RENEWALS: UPON AGREEMENT OF NTCC AND THE CONTRACTOR, A TERM

CONTRACT MAY BE EXTENDED FOR 2 ADDITIONAL 12-MONTH PERIODS AT THE SAME PRICE, TERMS

AND CONDITIONS. THE TOTAL CONTRACT TERM CANNOT EXCEED 36 MONTHS.

8 NTCC RESERVES THE RIGHT TO CANCEL THIS CONTRACT WITH A THIRTY (30) DAY WRITTEN

NOTICE.

Preferences: IN ACCORDANCE WITH LOUISIANA REVISED STATUTES 39:1595, A PREFERENCE MAY BE

ALLOWED FOR PRODUCTS MANUFACTURED, PRODUCED, GROWN, OR ASSEMBLED IN LOUISIANA OF

EQUAL QUALITY.

DO YOU CLAIM THIS PREFERENCE? YES _____________________ NO ________________

SPECIFY THE LINE NUMBERS: _____________________________________________________

SPECIFY LOCATION WITHIN LOUISIANA WHERE THIS PRODUCT IS MANUFACTURED, PRODUCED, GROWN

OR ASSEMBLED:

DO YOU HAVE A LOUISIANA BUSINESS WORKFORCE? YES: _______ NO _____________

IF SO, DO YOU CERTIFY THAT AT LEAST 50% OF YOUR LOUISIANA WORKFORCE IS

COMPRISED OF RESIDENTS OF LOUISIANA? YES: _____________ NO: ______________

FAILURE TO SPECIFY ABOVE INFORMATION MAY CAUSE ELIMINATION FROM PREFERENCES

BIDDERS REPRESENTATION:

IN MAKING YOUR BID, EACH BIDDER REPRESENTS THAT: YOU HAVE READ AND UNDERSTOOD THE BID DOUCMENTS AND YOU BID HAS BEEN MADE IN ACCORDANCE HEREWITH: YOU HAVE VISITED THE SITE, IF REQUIRED, AND HAVE FAMILIARIZED YOURSELF WITH THE LOCAL CONDITIONS UNDER WHICH THE

WORK IS TO BE PERFORMED.

BY SIGNING AND SUBMITTING ANY BID FOR $25,000 OR MORE, THE BIDDER CERTIFIES THAT THEIR

COMPANY, ANY SUBCONTRACTORS, OR PRINCIPALS ARE NOT SUSPENDED OR DEBARRED BY THE

GENERAL SERVICES ADMINISTRATION (GSA) IN ACCORDANCE WITH THE REQUIREMENTS IN “AUDIT

REQUIREMENTS IN SUBPART F OF THE OFFICE OF MANAGEMENT AND BUDGET’S UNIFORM

ADMIINISTRATIVE REQUIREMENTS, COST PRINCIPLES, AND AUDIT REQUIREMENTS FOR FEDERAL AWARDS” (FORMERLY OMB CIRCULAR A-133). A LIST OF PARTIES WHO HAVE BEEN SUSPENDED OR

DEBARRED CAN BE VIEWED AT WWW.SAM.GOV .

ANY ORDERS RESULTING FROM THIS SOLICITATION WILL BE PAID WITH FY 26 FUNDS, IF APPROPRIATED BY THE LEGISLATURE. DELIVERY CANNOT BE MADE PRIOR TO JULY 1, 2025 AND YOUR BID PRICES MUST

BE FIRM FOR ACCEPTANCE AT DELIVERY ACCORDINGLY.

THE QUANTITIES ARE ESTIMATED TO BE THE AMOUNT NEEDED. IN THE EVENT A GREATER OF LESSER QUANTITY IS NEEDED, THE RIGHT IS RESERVED BY THE STATE OF LOUISIANA TO INCREASE OR DECREASE

THE AMOUNT, AT THE UNIT PRICE STATED IN THE BID.

IN AN EFFORT TO INCREASE EFFICIENCIES AND EFFECTIVENESS, AS WELL AS BE STRATEGIC IN UTILIZING TECHNOLOGY AND RESOURCES FOR THE STATE AND VENDORS, THE STATE INTENDS TO MAKE ALL PAYMENTS TO VENDORS ELECTRONICALLY. THE LaCARTE PROCUREMENT CARD WILL BE USED FOR PURCHASES OF $5,000 AND UNDER, AND WHERE FEASIBLE, OVER $5,000. VENDORS WILL HAVE A CHOICE OF RECEIVING ELECTRONIC PAYMENT FOR ALL OTHER PAYMENTS BY SELECTING ELECTRONIC

VENDOR PAYMENT SOLUTION (EVP) OR ELECTRONIC FUNDS TRANSFER (EFT).

IF YOU RECEIVE AN AWARD AND DO NOT CURRENTLY ACCEPT THE LaCARTE CARD OR EVP, OR HAVE NOT ALREADY ENROLLED IN EFT, YOU WILL BE ASKED TO COMPLY WITH THIS REQUEST BY CHOOSING

ONE OF THE FOLLOWING THREE OPTIONS. YOU MAY INDICATE YOUR ACCEPTANCE BELOW.

THE LaCARTE PROCUREMENT CARD USES A VISA CARD PLATFORM. VENDORS RECEIVE PAYMENT FROM STATE AGENCIES USING THE CARD IN THE SAME MANNER AS OTHER VISA CARD PURCHASES. VENDORS CANNOT PROCESS PAYMENT TRANSACTIONS THROUGH THE CREDIT CARD CLEARINGHOUSE UNTIL THE

PURCHASED PRODUCTS HAVE BEEN SHIPPED AND RECEIVED, OR THE SERVICES PERFORMED.

FOR ALL STATEWIDE AND AGENCY TERM CONTRACTS:

• UNDER THE LaCARTE PROGRAM, PURCHASE ORDERS ARE NOT NECESSARY. ORDERS MUST BE

PLACED AGAINST THE NET DISCOUNTED PRODUCTS OF THE CONTRACT. ALL CONTRACT TERMS

AND CONDITIONS APPLY TO PURCHASES MADE WITH LaCARTE.

• IF A PURCHASE ORDER IS NOT USED, THE VENDOR MUST KEEP ON FILE A RECORD OF ALL

LaCARTE PURCHASES ISSUED AGAINST THIS CONTRACT DURING THE CONTRACT PERIOD. THE

FILE MUST CONTAIN THE PARTICULAR ITEM NUMBER, QUANTITY, LINE TOTAL AND ORDER

TOTAL. RECORDS OF THESE PURCHASES MUST BE PROVIDED TO THE OFFICE OF STATE

PROCUREMENT UPON REQUEST.

EVP METHOD CONVERTS CHECK PAYMENTS TO A VISA CREDIT CARD, THEREBY STREAMLINING

PAYMENTS TO YOUR ORGANIZATION. PARTICIPANTS RECEIVE A CREDIT CARD ACCOUNT NUMBER WITH http://www.sam.gov/

UNIQUE SECURITY FEATURES. THIS CARD WILL HAVE $0 AVAILABLE FUNDS UNTIL AN INVOICE IS APPROVED FOR PAYMENT. AS PAYMENTS ARE APPROVED, ELECTRONIC REMITTANCE NOTIFICATIONS

ARE SENT VIA EMAIL ALONG WITH APPROVAL TO CHARGE THE CARD FOR THAT AMOUNT. EVP

REQUIRES NO CHANGE TO CURRENT INVOICE PROCEDURES; IT IS SECURE, AND DOES NOT REQUIRE

YOUR BANK INFORMATION.

EFT PAYMENTS ARE SENT FROM THE STATE’S BANK DIRECTLY TO THE PAYEE’S BANK EACH WEEKDAY.

THE ONLY REQUIREMENT IS THAT YOU HAVE AN ACTIVE CHECKING OR SAVINGS ACCOUNT AT A

FINANCIAL INSTITUTION THAT CAN ACCEPT AUTOMATED CLEARING HOUSE (ACH) CREDIT FILES AND

REMITTANCE INFORMATION ELECTRONICALLY. ADDITIONAL INFORMATION IS AVAILABLE AT:

http://www.doa.louisiana.gov/OSRAP/EFTfor Website.pdf http://www.doa.louisiana.gov/ERP/pdfs/LaGov%20AP-03%20-%20- 20EFT%20Vendor%20Enrollment%20Form.pdf http://www.doa.louisiana.gov/OSRAP/EFTfor Website.pdf

IF AN AWARD IS MADE TO YOUR COMPANY, PLEASE CHECK Payment Type Will Accept Already Enrolled WHICH OPTION YOU WILL ACCEPT OR INDICATE IF YOU ARE LaCarte _______ ______

ALREADY ENROLLED EVP _______ ______

EFT _______ ______

Printed Name of Individual Authorized

Authorized Signature for payment type chosen Date

Email address and phone number of authorized individual http://www.doa.louisiana.gov/OSRAP/EFTfor%20Website.pdf http://www.doa.louisiana.gov/ERP/pdfs/LaGov%20AP-03%20-%20-20EFT%20Vendor%20Enrollment%20Form.pdf http://www.doa.louisiana.gov/ERP/pdfs/LaGov%20AP-03%20-%20-20EFT%20Vendor%20Enrollment%20Form.pdf http://www.doa.louisiana.gov/OSRAP/EFTfor%20Website.pdf

PRICE SHEET: _______________________ ___ INVITATION TO BID # 40023-S26002

COMMODITY DESCRIPTION ____________________________ QUANTITY __ UNIT UNIT PRICE ______EXTENDED PRICE

MOST ITEMS ARE BRAND SPECIFIC – NO SUBSTITUTIONS UNLESS NOTED

PLEASE READ THE NOTES CAREFULLY BEFORE SUBMITTING YOUR BID

NOZZLES

1. CKW 53N87 PER EA _______________ _______________

3/4” LARGE #12 ALUMINA GAS LENS TIG NOZZLE

2. CKW 53N88 PER EA _______________ _______________

5/8” x 1-7/8” #10 ALUMINA GAS LENS NOZZLE

3. CKW 53N88XL PER EA _______________ _______________

ALUMINA LARGE X LONG #10 GAS LENS NOZZLE

4. CKW 54N14 PER EA _______________ _______________

#8 ½” ALUMINA NOZZLE CUP

5. CKW 54N16 PER EA _______________ _______________

3/8” X 1-5/8” ALUMINA CUP (3AG6)

6. CKW 54N18 PER EA _______________ _______________

#4 ALUMINA GAS LENS NOZZLE, ¼”

7. CKW 57N74 PER EA _______________ _______________

1/2" x 1-5/8” LARGE #8 ALUMINA GAS LENS

TIG NOZZLE

8. CKW 57N75 PER EA _______________ _______________

#6 3/8” ALUMINA NOZZLE CUP

9. CKW 3GHSLD PER EA _______________ _______________

HEATSHIELD LARGE DIAMETER GAS LENS 3 SERIES

10. 401-6-62 TREGASKISS NOZZLE PER EA _______________ ________________

11. KP2742-1-62R LINCOLN MAGNUM PRO NOZZLE PER EA _______________ ________________

12. KP2743-1-62RA LINCOLN MAGNUM PRO 550A GAS PER EA ________________ ________________

NOZZLE

13. KP2742-1-50F LINCOLN 350A THREAD ON MIG NOZZLE PER EA ________________ ________________

14. KP2742-1-62R LINCOLN MAG PRO 250/350A PER EA _________________ ________________

15. D3GS332-P CKW STANDARD GAS SAVER KIT PER EA ________________ __________________

3/32 3 SERIES

16. D3GS418-P CKW STANDARD GAS SAVER KIT PER EA _________________ _________________

1/8 3 SERIES

17. D4GS332LD CKW LARGE DIAMETER GAS KIT PER EA _________________ __________________

3/32 3 SERIES

18. D4GS418LD CKW LARGE DIAMETER GAS KIT PER EA _________________ __________________

1/8 3 SERIES

INSULATORS

19. CKW 54N01 PER EA _______________ _______________

TEFLON HEAT SHIELD GAS LENS INSULATOR

20. CKW 54N63-20 PER EA _______________ _______________

LARGE GAS LENS HEAT SHIELD

21. CKW 54N63 PER EA _______________ ________________

TEFLON HEAT SHIELD LARGE GAS LENS INSULATOR

22. CKW 18CG PER EA _______________ ________________

TEFLON STANDARD HEAT SHIELD

23. KP2773-2 LINCOLN MAGNUM PRO INSULATOR – 350A PER EA _______________ ________________

24. KP2773-1 LINCOLN MAGNUM PRO INSULATOR – 550A PER EA ________________ ________________

25. TWECO 1320-1125 NOZZLE INSULATOR PER EA ________________ ________________

26. KP2744-035T LINCOLN COPPER PLUS .035 MIG CONTACT TIP PER EA _________________ _________________

27. KP2744-045T LINCOLN COPPER PLUS

CONTACT TIP – 350A TAPERED .045 IN PER EA _________________ _________________

28. KP2745-035AT LINCOLN COPPER PLUS PER EA _________________ _________________

CONTACT TIP – 550A ALUMINUM TAPERED .035 IN

CONTACT TIPS

29. MILLER PLASMA 249929 PER EA _______________ _______________

MILLER XT60 60 AMP TIP

30. WYPO #1 PER EA _______________ ________________

STANDARD TIP CLEANER KIT

31. TRE403-20-35-25 TREGASKISS .035 PER EA _______________ _________________

CONTACT TIP

32. TRE403-20-45-25 TREGASKISS .045 PER EA ________________ _________________

33. KP2744-035 LINCOLN MAGNUM PRO .035 PER EA ________________ _________________

34. KP2744-045 LINCOLN MAGNUM PRO .045 PER EA ________________ _________________

35. KP2744-364A LINCOLN MAGNUM PRO PER EA ________________ _________________

CONTACT TIP – 350A ALUMINUM 3/64 IN

DIFFUSERS

36. KP2746-1 LINCOLN MAGNUM PRO DIFFUSER PER EA _______________ _______________

350A, THREAD ON

37. TRE404-26 TREGASKISS TOUGH LOCK PER EA _______________ _______________

RETAINING HEAD

38. KP2747-1A LINCOLN MAGNUM PRO DIFFUSER PER EA _______________ ________________

550A, THREAD ON, ALUMINUM

CONNECTORS

39. TWECO 92051216 PER EA ________________ _______________

300 AMP HIGH QUALITY COPPER GROUND CLAMP FOR

2/0 CABLE WITH 1-1/2” JAW CAPACITY (8-1/4” LENGTH)

40. TWECO 94251211 PER EA _______________ _______________

2-MPC-1 POSITIVE-CAM MECHANICAL SINGLE BALL

POINT ZINC PLATED MALE HALF CABLE CONNECTOR

FOR 1/0 - 3/0 CABLE

41. TWECO 94251225 PER SET _______________ ________________

COMPLETE CABLE CONNECTOR FOR SMAW, SAW,

GMAW, FCAW PROCESSES – 1/0 – 3/0

42. WESTERN ENTERPRISES 411 PER EA _______________ _______________

5/8” – 18 B RH BRASS INERT GAS Y CONNECTION

43. LENCO 07020 PER EA _______________ _______________

MODEL L-120 SOLDER TYPE CABLE LUG

FOR #1-2/0 CABLE

TORCHES

44. MILLER WP-17FV-25-R PER EA ________________ _______________

A-150 150 AMP AIR COOLED TIG TORCH PACKAGE

WITH FLEXIBLE HEAD AND 25’ CABLE AND CUTOFF

VALVE

45. WELDCRAFT WP-17FV PER EA _______________ _______________

17 SERIES AIR COOLED FLEXIBLE TIG TORCH

BODY WITH VALVE

46. MILWP 26FV-12-R PER EA _______________ _______________

200 AMP AIR COOLED TIG TORCH WITH 60 DEGREE

FLEXIBLE HEAD AND 12.5’ CABLE

47. SHURLITE 3001B PER EA _______________ _______________

UNIVERSAL ROUND FILE LIGHTER/TORCH STRIKER

48. SHURLITE 5003X PER EA _______________ _______________

GF FULLER STRIKER TRIPLE FLINT RENEWAL

49. SHURLITE 3001X PER EA _______________ _______________

FLINT RENEWAL FOR UNIVERSAL SINGLE PACK

50. HEAVY HITTERS HH150F-10 TIG RIG PER EA ________________ ________________

51. HEAVY HITTERS HH250-10TIG RIG PER EA ________________ ________________

52. ANCHOR 17FV-25-R PER EA ________________ _________________

150 AMP 25’ FLEX TIG TORCH (100-17FV-25-R)

53. ANCHOR 17FV (100-17FV) PER EA _________________ ________________

FLEX TORCH HEAD

54. PROFAX 105Z57 POWER CABLE ADAPTER PER EA _________________ ________________

FOR 9,9F,9FV, 9P, AND 9V TIG TORCHES

55. LIN K1784-4 LINCOLN 275 PRECISION TIG WATER- PER EA _________________ _______________

COOLED PTW-20 TIG TORCH 25 FT

56. HEAVY HITTER HH 180VL HEAVY HITTER LONG PER EA ________________ _______________

FLEX VALVE HEAD TORCH

57. HEAVY HITTER HH 217VS HEAVY HITTER SHORT PER EA _________________ _______________

FLEX VALVE HEAD TORCH

CUTTING TIPS

58. VICTOR 0330-0012 PER EA _______________ _______________

SIZE 0 ONE-PIECE GENERAL-PURPOSE CUTTING TIP 1-101

59. VICTOR 0331-0013 PER EA _______________ _______________

SIZE 0 ONE-PIECE CUTTING TORCH TIP 0-3-101

60. VICTOR 0330-0005 PER EA _______________ _______________

SIZE 1 ONE-PIECE GENERAL-PURPOSE CUTTING TIP

61. VICTOR 0330-0006 PER EA _______________ _______________

SIZE 2 ONE-PIECE GENERAL-PURPOSE CUTTING TIP 1-101

62. HARRIS 6290-2 PER EA _______________ _______________

SIZE 2 ONE-PIECE GENERAL-PURPOSE HAND CUTTING TIP

63. VICTOR 0331-0016 PER EA _______________ _______________

SIZE 3 ONE-PIECE GENERAL-PURPOSE CUTTING TIP 3-101

64. FLAME TECH FLA 0GPP

SIZE 0 PROPYLENE 3 SERIES CUTTING TIP PER EA ________________ ________________

65. FLAME TECH FLA 1GPP

SIZE 1 PROPYLENE 3 SERIES CUTTING TIP PER EA ________________ ________________

66. FLAME TECH FLA 2GPP

SIZE 2 PROPYLENE 3 SERIES CUTTING TIP PER EA ________________ ________________

67. FLAME TECH FLA 3GPP

SIZE 3 PROPYLENE 3 SERIES CUTTING TIP PER EA ________________ ________________

LINERS

68. 415-35-15 MIG LINER UNIVERSAL 15 FT PER EA _______________ _______________

69. KP2879-5 LINCOLN SPOOL GUN LINER PER EA _______________ ________________

70. KP44-3545-15 CABLE LINER .035-.045 IN 15 FT PER EA _______________ ________________

71. KP42-4045-15 CABLE LINER .035-.045 IN 15 FT PER EA _______________ ________________

72. TWECO 1440-1141

WS44-116-15 LINER 15 FT .052-1/16, 300-450A PER EA _______________ ________________

ELECRODES

73. CKW - T187GT2 PER PAK _______________ _______________

1/8 X 7 - 2% THORIATED TUNGSTEN ELECTRODE

10/BOX

74. CKW - T3327GT2 PER PAK _______________ _______________

3/32 X 7 – 2% THORIATED TUNGSTEN ELECTRODE

75. CKW - T187G PER PAK _______________ _______________

1/8 X 7 PURE TUNGSTEN ELECTRODE

76. CKW - T3327G PER PAK _______________ _______________

3/32 X 7 – PURE TUNGSTEN ELECTRODE

77. CKW – T187GC2 PER PAK _______________ _______________

1/8 x 7 - 2% CERIATED TUNGSTEN

GREY (EW-CE2) 10/BOX

78. CKW – T3327GC2 PER PAK _______________ _______________

3/32 x 7 - GREY TIP TUNGSTEN

2% CERIATED (EW-CE2) 10/BOX

79. CKW – T3327GL PER PAK _______________ _______________

3/32 X 7 - 2% LATHANATED

TUNGSTEN (EWLA-2) BLUE 10/BOX

80. CKW – T187GL PER PAK _______________ _______________

1/8 x 7 - 2% LATHANATED

TUNGSTEN (EWLA-2) BLUE

81. TWECO 91101109 PER EA ________________ _______________

A-532-MC 200 AMP BALL POINT COPPER ALLOY

ELECTRODE HOLDER FOR 2/0 CABLE (8-1/2” LENGTH)

82. RAD64002221 RADNOR 5/32” X 12” DC POINTED PER EA ________________ _______________

COPPERCLAD ARC GOUGING ELECTRODE

COLLETS

83. CKW 45V27 PER EA _______________ _______________

1/8 MEDIUM #10 TIG GAS LENS COLLET BODY

84. CKW 45V26 PER EA _______________ _______________

3/32 MEDIUM TIG GAS LENS COLLET BODY

85. CKW 13N23 PER EA _______________ _______________

3/32” COLLET TIG

86. CKW 10N24 PER EA _______________ _______________

3/32” STANDARD COLLET

87. CKW 10N25 PER EA _______________ _______________

1/8” 10N SERIES TIG COLLET

88. CKW 10N28 PER EA _______________ _______________

CK COLLET BODY FOR 18” (3CB418)

89. CKW 45V64 PER EA _______________ _______________

3 SERIES LARGE DIAMETER GAS LENS

FOR 3/32” (2.4MM)

90. CKW 995795 PER EA ________________ _______________

3 SERIES 1/8” GAS LENS COLLET BODY

BACK CAP

91. WELDCRAFT 57Y02 PER EA _______________ _______________

LONG BACK CAP – 300L

92. CKW 57Y04 PER EA _______________ _______________

BACK CAP WITH O-RING

93. CKW 300M PER EA _______________ _______________

MEDIUM BACK CAP

REGULATORS

94. HARRIS 4408578 PER PACK _______________ _______________

MEDIUM DUTY SR 350/360 DUAL PACK

SINGLE STAGE REGULATOR

95. SUP FBK-100 PER SET _______________ _______________

SUPERIOR FLASH ARRESTOR KIT OXY/ACET

REGULATOR FLAMEBUSTER

96. FLAME TECH VMOR-22 PER EA _______________ ________________

OXYGEN REGULATOR

97. FLAME TECH VMAR-22 PER EA _______________ _______________

ACETELYNE REGULATOR

98. FLAME TECH 100-FL-AR580 PER EA _______________ _______________

ARGON FLOW METER & REGULATOR

99. FLAME TECH FLOWMETER 100-FL-CD320 PER EA _______________ _______________

CARBON DIOXIDE SINGLE STAGE FLOW GAUGE

REGULATOR

100. VICTOR VIC 0781-0527 VICTOR HEAVY DUTY PER EA _______________ _______________

SINGLE STAGE SR 450 REGULATOR

101. VICTOR VIC 0781-0589 VICTOR HEAVY DUTY PER EA _______________ _______________

SINGLE STAGE SR 450 REGULATOR

HELMETS/REPLACEMENT PARTS

102. DYNUVT01 PER EA _______________ _______________

2 x ¼ SAFETY/POLYCARBONATE SAFETY PLATE

BRAND______________________________

MODEL______________________________

103. PYRAMEX S1010 PER EA _______________ _______________

FACESHIELD WINDOW CLEAR

104. WELDCOTE – KLEARVIEWLI PER EA _______________ _______________

WELDCOTE INSIDE CLEAR LENSE FOR WELDING

HELMET

105. WELDCOTE – KLEARVIEWLO PER EA _______________ _______________

WELDCOTE OUTSIDE CLEAR LENSE FOR WELDING

HELMET

106. TVPRV40815EPDFG PER EA _______________ ________________

FACESHIELD WINDOW DARK TINTED

107. PYRAMEX HGBR PER EA _______________ _______________

RATCHET HEADGEAR

108. HON1CR HONEYWELL BLACK/GRAY PLASTIC HEADGEAR PER EA _______________ ________________

FIBRE-METAL 110 WELDING HELMET

109. HEADGEARADJ WELDCOTE ADJUSTABLE HEADGEAR PER EA _______________ ________________

WHEELS/BLADES

110. MERIT 08834137372 PER EA _______________ _______________

2” x 1” x ¼” 120 GRIT – MERIT SMALL DIAMETER

FLAP WHEEL

111. DW 4523 PER EA _______________ _________________

GRINDING BLADES 4-1/2”x ¼” x 5/8” –

11 THREAD W/ HUB

112. DW8435 PER EA _______________ ________________

4-1/2” x 1/8” x 5/8” – 11 THREAD

DEPRESSED CENTER CUT OFF WHEEL THREADED W/HUB

113. DW 8751 PER EA _______________ _______________

GRINDING DISC/ROCKS 4-1/2” x 3/32” x 5/8” –

11 THREAD

114. DW 8062 PER EA _______________ _______________

4-1/2” x 3/64” x 7/8” CUTOFF WHEEL

115. DW 8310 PER EA _______________ _______________

4-1/2” x 7/8” FLAP DISC - 120 GRIT

116. PFERD 61114 PER EA _______________ ________________

4-1/2” x ¼” x 5/8” – 11 THREAD W/ HUB

DEPRESSED CENTER GRINDING WHEEL - 30 GRIT

117. PFERD 82900 PER EA _______________ _______________

PFERD ADVANCE 82900 CRIMPED WIRE WHEEL

BRUSH – 3 IN DIAMETER – 0.014 INCH CARBON

STEEL WIRE

118. PFERD 24393 PER EA _______________ _______________

CYLINDRICAL (RADIUS END) SHAPE C –

3/4” SHANK DIAMETER

119. PFERD 24462 PER EA _______________ _______________

TUNGSTEN CARBIDE RADIUS END CARBIDE BUR

½ INCH DIAMETER 1 INCH LONG CYLINDRICAL

120. CAMEL 41734 PER EA _______________ ________________

4-1/2” x 5/8” – 11 60 GRIT - TYPE 29 FLAP WHEEL

121. NOR 66253370022 PER EA _______________ _______________

KNOT WHEELS - 4-1/2” x 5/8” – 11 THREAD

WIRE WHEELS

122. PFERD 82487 PER EA _______________ _______________

6” KNOTTED WIRE WHEEL BRUSH

123. DW 8725 PER EA _______________ _______________

6” x .045” x 7/8” CUTOFF WHEEL

124. NORTON 66252809600 PER EA _______________ _______________

GRINDING WHEELS/ROCKS 6-4 ¾ x 2 x 5/8 – 11

125. PFERD 61006 PER EA _______________ ________________

7” x 1/4” x 5/8’ – 11 TYPE 27 DEPRESSED-CENTER

REINFORCED GRINDING WHEEL – 24 GRIT

126. PFERD 61007 PER EA _______________ _________________

9” x ¼” x 5/8” -11 TYPE 27 GRINDING WHEEL

W/ THREADED HUB

127. PFERD 64502 PER EA _______________ _______________

14” X 3/32” X 1” LARGE DIAMETER CUT-OFF WHEEL

36 GRIT

128. PFERD 64503 PER EA _______________ _______________

CHOP SAW BLADES FOR METAL 16” x 1/8” x 1”

36 GRIT

129. WEILER 17681 PER EA _______________ _______________

KNOTTED WIRE WHEEL BRUSH – 3-1/4 INCH

DIAMETER, 0.014 INCH STEEL WIRE

130. D1472CF DIABLO 14 INCH STEEL DEMON 72T PER EA ________________ ______________

CERMET ll CARBIDE FERROUS METAL SAW BLADE

131. SLUGGER 6 35 02 014 60 0 1500 MAX RPM PER EA ________________ _______________

14” (355 X 25.4 X 2.4 MM) 66T CUTTING BLADE

HAND TOOLS

132. PFERD 11155 PER EA _______________ ________________

AMERICAN PATTERN HALF ROUND BASTARD

PIPELINER HAND FILE 14” L x 1-3/8” W x 11/32” D

133. PFERD 85051 PER EA ________________ ________________

SHOE HANDLE WIRE BRUSH CARBON STEEL

134. KLEIN D213-9NE PER EA _______________ _______________

9” HIGH LEVERAGE NE-TYPE SIDE CUTTER PLIERS (70040)

135. CHANNEL LOCK 430 PER EA _______________ _______________

10” CHANNEL LOCK PLIERS

136. ANCH10-206 PER EA _______________ _______________

CHANNEL LOCK NEEDLE NOSE PLIERS

137. IRWIN 2078610 PER EA _______________ _______________

10” ADJUSTABLE WRENCH

138. CRESCENT AC210VS PER EA _______________ _______________

10” CHROME FINISH ADJUSTABLE WRENCH

139. CRESCENT AC16 PER EA ________________ ________________

6” CHROME FINISH ADJUSTABLE WRENCH

140. CRESENT CCW11 PER EA ________________ _______________

CRESENT 7/8 COMBINATION WRENCH SAE

FULLY POLISHED

BRAND_____________________________

MODEL_____________________________

141. CRESENT CCW16 PER EA ________________ _______________

CRESENT 1 COMBINATION WRENCH SAE

FULLY POLISHED

142. WILTON 14142 PER EA ________________ ________________

WILTON 104 HEAVY DUTY C-CLAMP 4”

143. WILTON 14156 PER EA ________________ _______________

WILTON 108 HEAVY DUTY C-CLAMP 6”

BRAND_______________________________

MODEL_______________________________

144. WILTON 14184 PER EA ________________ ________________

WILTON 110 HEAVY DUTY C-CLAMP 10”

145. CRESCENT C11CCSV PER EA ________________ ________________

11” LOCKING C-CLAMP WITH SWIVEL PADS

146. CRESCENT CRECLP3SETN PER EA ________________ ________________

3 PIECE 5”, 7” 10” CURVED JAW, LOCKING

PLIERS SET

147. CRESCENT C10CV PER EA _______________ _______________

10” CURVED JAW LOCKING PLIERS WITH WIRE CUTTER

148. EKL 15616 PER EA ________________ ________________

EKLIND 8MM ALLEN WRENCH

149. AME 1196900 PER EA _______________ _______________

AMES 4-LB ENGINEER’S HAMMER W/ 16”

HICKORY HANDLE 30-576

150. PLUMB 11-520 PER EA _______________ _______________

24 OZ BALL PEIN HAMMER FIBERGLASS HANDLE

151. MAYHEW TOOLS 24004 PER EA _______________ ________________

5/8” DIAMETER CENTER PUNCH

152. IRWIN 1794469 PER EA _______________ ________________

METAL COMBINATION SQUARE, STAINLESS STEEL

BLADE, 12 INCH BODY

153. HEAVY DUTY COMMERCIAL CORN/STRAW BROOM PER EA _______________ _______________

15” SWEEPING WIDTH

MODEL____________________________

154. SHOP PUSH BROOM AND HANDLE PER EA _______________ _______________

155. ROYAL RBMMBEC1S PER EA ________________ _______________

B&M EC1S HANDHELD BRUSH LONG HANDLE

156. PROFAX PX8WMP

MULTI PURPOSE 8-WAY MIG PLIERS PER EA _______________ _______________

157. SPIRAL HANDLE CHIPPING HAMMER PER EA _______________ _______________

158. LENOX 44-7/8” .020 18TPI

BANDSAW BLADE LSS16950 PER EA _______________ _______________

159. 900-FL5 PER EA _______________ _______________

SOAPSTONE FLAT

160. KOMELON 16 FT TAPE MEASURE SM5416 PER EA _______________ _________________

161. KOMELON 25 FT TAPE MEASURE SM5425 PER EA _______________ ________________

162. DEWALT 11 AMP 4.5” SMALL ANGLE GRINDER PER EA ________________ ________________

DWE4222N

SAFETY

163. HOWARD LEIGHT LL-1S PER EA _______________ ________________

HOWARD LEIGHT LASER LITE EARPLUGS

UNCORDED - 200/BOX

164. MOLDEX 6900 PER EA ________________ _______________

EARPLUGS W/CORDS 100/BOX

165. PYRAMEX S4110S PER EA _______________ _______________

SAFETY GLASSES – CLEAR

166. PYRAMEX S4120S PER EA _______________ _______________

SAFETY GLASSES – TINTED

167. TIL30S PER EA _______________ _______________

TILLMAN TIG GLOVES – S

168. TIL1338S PER EA _______________ _______________

TILLMAN GOATSKIN UNLINED TIG GLOVES – S

169. TIL1338-M PER EA _______________ _______________

TILLMAN TIG GLOVES - M

170. TIL24CL PER EA _______________ _______________

TILLMAN TIG GLOVES – L

171. TIL30XL PER EA _______________ _______________

TILLMAN TIG GLOVES – XL

172. TIL 1075L PER EA _______________ _______________

TILLMAN STICK WELDING GLOVES – L

173. PYRAMEX S4180S PER EA ________________ ________________

INDOOR/OUTDOOR MIRROR POLYCARBONATE

4100 SERIES SAFETY GLASSES

174. REV25GS BLACK STALLION TIG GLOVES PER EA _______________ ________________

175. REV25GM BLACK STALLION TIG GLOVES PER EA _______________ _________________

176. REV25GL BLACK STALLION TIG GLOVES PER EA _______________ _________________

177. T50-M BLACK STALLION GOATSKIN PER EA ________________ ________________

178. T50-L BLACK STALLION GOATSKIN PER EA ________________ ________________

179. BM88 MEDIUM BLACK STALLION MIG GLOVES PER EA ________________ ________________

180. BM88 LARGE BLACK STALLION MIG GLOVES PER EA _________________ ________________

181. LS50 SMALL BLACK STALLION WOMENS STICK GLOVE PER EA ________________ ________________

182. LS50 MEDIUM BLACK STALLION WOMENS STICK GLOVE PER EA _________________ ________________

CABLE/HOSE

183. GNSWELD-1 PER FT _______________ _______________

KALAS DIRECT WELDING CABLE #1 – PER FT

184. GNS RH 3127-25 PER EA _______________ _______________

ARGON HOSE 1/4” x 25’ INERT GAS HOSE

185. GNS RH2103-50 PER EA _______________ ________________

BESTWELDS – TWIN TORCH HOSE ¼” x 50’

186. TIG RIG POWER HOSE 57Y01R

FOR WF17 TORCH PER EA ________________ ________________

187. WESTERN AW-17

INERT ARC NIPPLE (NP-72) ¼” ID HOSE PK/50 PER EA _________________ _________________

BRAND________________________________

MODEL________________________________

188. ¼” x 10’ SINGLE GREEN ARGON HOSE PER EA ___________________ _________________

GRADE R WITH FITTINGS

BRAND________________________________

MODEL________________________________

189. WES CK-26 WESTERN HOSE REPAIR KIT (RK-26) ¼ HOSE PER EA ___________________ _________________

190. WES CK-30 WESTERN MINI HOSE REPAIR KIT B SIZE PER EA _______________ _______________

INERT FOR ¼ HOSE

191. HHT HHRH-10 HEAVY HITTER 1O FT HOSE REPAIR KIT PER EA ________________ _______________

192. HHT HHRK-15 HEAVY HITTER 15 FT HOSE REPAIR KIT PER EA _________________ _______________

SUPPLIES

193. MATHEY D160 PER EA _______________ _______________

4” x 4’ BLACK MEDIUM WRAP AROUND

PIPE TAPE

MILLER PLASMA PARTS HANDHELD

194. MILLER 192053 PER EA ________________ _______________

MILLER DRAG SHIELD

195. MILLER 192050 PER EA _______________ _______________

MILLER RETAINING CUP

196. MILLER 192051 PER EA _______________ _______________

MILLER TIPS

197. MILLER 192047 PER EA _______________ _______________

MILLER ELECTRODE

198. MILLER 192049 PER EA _______________ _______________

MILLER SWIRL RING

199. MILLER 176655 PER EA _______________ _______________

ICE 25C ELECTRODES

HYPERTHERM POWERMAX 100 G3 SERIES PARTS PLASMA TABLE

200. 120929 PER EA _______________ _______________

DRAG SHIELD

201. 120928 PER EA _______________ _______________

RETAINING CUP

202. 120931 PER EA _______________ _______________

TIPS

203. 120926 PER EA _______________ _______________

ELECTRODE

204. 120925 PER EA _______________ _______________

SWIRL RING

HYPOTHERM POWERMAX 65 PLASMA CUTTER

205. 220818 PER EA _______________ _______________

SHIELD TIP

206. 220854 RETAINING CUP PER EA _______________ _______________

207. 220819 PER EA _______________ _______________

208. 220842 PER EA _______________ _______________

ELECTRODE

209. 220857 PER EA _______________ _______________

210. 428930 HYPERTHERM SMARTSYNC CARTRIDGE PER EA ________________ _______________

65A MECHANIZED CUTTING

211. 428926 HYPERTHERM SMARTSYNC CARTRIDGE PER EA ________________ _______________

30-40A MECHANIZED FINE CUT

RAZERWELD PLASMA CUTTER

212. RAZ RW1048-03 ELECTRODE PER EA ________________ _______________

213. RAZ RW1601 SWIRL RING PER EA ________________ _______________

214. RAZ RW792-08 CUTTING TIP PER EA _________________ _______________

215. RAZ0632-05 NOZZLE PER EA _________________ _______________

216. RAZ RW0658 SHIELD CAP PER EA _________________ _______________

217. RAZ RW0678 DOUBLE POINTED SPACER PER EA _________________ _______________

MILLER SPECTRUM 300 CUTTER ICE-25C

218. MILLER 176656 PER EA _______________ ________________

TIP 25 AMP

219. MILLER 202808 PER EA _______________ ________________

CUP SHIELD 25 AMP ICE-25C/27C

220. MILLER 202809 PER EA ________________ _______________

SWIRL RING 25 AMP ICE-25C/27C

221. MILLER 169232 PER EA ________________ _______________

REPLACEMENT O-RING

222. MILLER 225616 PER EA _______________ _______________

ICE 27C/T DRAG SHIELD

223. MILLER 176655 ELECTRODE PER EA _______________ _______________

224. MILLER 225671 TIP DRAG SHIELD PER EA ________________ ________________

225. MILLER 225672 RETAIN CUP DRAG SHIELD PER EA ______________ ________________

MILLER SPECTRUM 1250 PLASMA CUTTER – ICE100 T/TM

226. MILLER 212730 PER EA _______________ _______________

100 AMP DRAG SHIELD

227. MILLER 212733 PER EA _______________ _______________

PLASMA CUTTING RETAINING CUP

228. MILLER 212726 PER EA _______________ _______________

80 AMP PLASMA TIP

229. MILLER 212724 PER EA _______________ _______________

80 AMP ELECTRODE

230. MILLER 212734 PER EA _______________ ________________

SWIRL RING/ICE-100 T/TM

231. MILLER 212735 PER EA _______________ _______________

O-RING

HYPERTHERM POWERMAX 600 PLASMA CUTTER (DURAMAX TORCH)

232. HYPERTHERM 220857 PER EA _______________ _______________

COPPER SWIRL RING, 45/65 AMP

233. HYPERTHERM 220842 PER EA ________________ _______________

COPPER ELECTRODE, 45/105 AMP

234. HYPERTHERM 220819 PER EA _______________ _______________

DRAG CUTTING NOZZLE, 65 AMP

235. HYPERTHERM 220854 PER EA _______________ ________________

RETAINING CAP, 45/105 AMP

236. HYPERTHERM 220818 PER EA ________________ ________________

COPPER DRAG CUTTING SHIELD, 45/65 AMP

237. HYPERTHERM 220941 PER EA ________________ ________________

COPPER NOZZLE 45 AMP

238. HYPERTHERM 220931 PER EA ________________ ________________

COPPER SHIELD DEFLECTOR, 45 AMP

239. HYPERTHERM FINECUT 220930 PER EA ________________ ________________

COPPER NOZZLE, 45 AMP

240. HYPERTHERM 220947 PER EA ________________ _________________

MILLER SPECTRUM 875 PLASMA CUTTER

241. MILLER 256027 PER EA ________________ _________________

DRAG SHIELD XT, 60 AMP

242. MILLER 249929 PER EA ________________ _________________

CONTACT TIP XT, 60 AMP

243. MILLER 256026 PER EA ________________ _________________

ELECTRODE XT, 60 AMP

244. MILLER 256028 PER EA ________________ _________________

SWIRL RING XT, 60 AMP

245. MILLER 256029 PER EA ________________ _________________

RETAINING CUP XT, 60 AMP

MILLER MIG WHIP & PARTS

246. BERNARD Q3015AE8HMC PER EA ________________ _________________

15 FT, 300 AMP, 052 MIG GUN WITH MILLER PLUG

247. TREGASKISS 404-26-02 PER EA _______________ ________________

TOUGH RETAINING HEAD

248. BERNARD 4477 PER EA ________________ ________________

BERNARD POWER PIN TIP .023 - .045 MILLER STYLE

249. TREGASKISS 401-6-62 PER EA ________________ ________________

5/8 INCH COPPER NOZZLE

250. TREGASKISS 403-20-35 PER EA ________________ ________________

TOUGH LOCK HEAVY DUTY .035 CONTACT TIP

251. TREGASKISS 403-20-45 PER EA ________________ _________________

TOUGH GUN HEAVY DUTY TOUGH LOCK

.045 CONTACT TIP

252. DELIVERY PER ORDER TO SPECIFIED LOCATIONS: PER ORDER ________________ _________________

• 1710 SULLIVAN DR., BOGALUSA, LA 70424

• 7067 HWY 10, GREENSBURG, LA 70441

• 111 PRIDE DR., HAMMOND, LA 70401

• 27268 HWY 21N., ANGIE, LA 70426

• 11640 BURGESS AVE., WALKER, LA 70785

• 65556 CENTERPOINT BLVD., LACOMBE, LA 70445

NOTES:

• THIS IS AN ALL OR NONE BID. ONLY 1 VENDOR WILL BE AWARDED.

• THIS BID IS FOR THE SUPPLY OF THE ABOVE WELDING CONSUMABLES ON AN AS NEEDED BASIS – NOT A SINGLE PURCHASE. PRICES MUST BE FIRM AND GUARANTEED OVER THE ENTIRE SPAN OF

THE AGREEMENT, WHICH IS, JULY 1, 2025 – JUNE 30, 2026.

• IF PRICING CANNOT BE HONORED THROUGH THE ENTIRE SPAN OF THE AGREEMENT, THE

AGREEMENT WILL BE CANCELLED AND REBID.

• PLEASE PUT BID NUMBER IN THE SUBJECT LINE OF THE EMAIL