4-Specifications Requirements Confirmation Form.pdf
PDF 156 KB Posted
- Attached to
- One (1) Terminal Ramp Sweeper
- Solicitation number
- RFQ 2026-0008
- Issued by
- Chatham County, Georgia
About this file
This is a Specifications/Requirements Confirmation Form for RFQ 2026-0008 issued by the Savannah Airport Commission (SAC) in Georgia for the procurement of one new Terminal Ramp Sweeper. The unit must be brand new with no prior use, manufactured in the USA, and mounted on a conventional cab chassis. The sweeper shall be equipped with a gasoline engine, chrome yellow paint, vinyl seats and black floor covering with heavy-duty floor mats, power windows and locks, heat and air conditioning, AM/FM stereo with Bluetooth and dual USB ports, and shall operate without requiring a Commercial Driver's License. The vehicle must be capable of both wet and dry sweeping and vacuuming operations with a low-profile design (78 inches in height) to access low-clearance areas such as parking decks. Key operational components include a hydraulic power system with a minimum 3200 psi pressure, piston pump with direct transmission PTO drive, aluminum alloy blower with anti-friction bearings, cyclonic dust suppression system with 30-gallon minimum water storage capacity, stainless steel hopper with approximately 2.5 to 3 cubic yard capacity, dual-chamber pick-up head with minimum 78-inch width and 1804 square inch area, and gutter broom with LED floodlight and parabolic mirror.
The sweeper must include comprehensive safety and warning devices consisting of rear view camera system, LED amber beacon light, backup alarm, alternating LED bumper flashers, directional LED caution displays, and 2000-lumen white LED work lights. The manufacturer shall provide a five-year warranty on the sweeper unit and hydraulic system, a three-year/36,000-mile bumper-to-bumper chassis warranty, and a minimum 60-month/100,000-mile drivetrain warranty. Documentation requirements include operator's manuals and parts/service manuals in both paper and electronic formats, complimentary training courses at the manufacturer's facility for complete maintenance and operation, and electronic video instruction on operation, safety, and maintenance procedures. The successful bidder must supply four sets of keys with fobs at delivery and provide documentation regarding local service, parts availability, and technical support. No dealer decals are permitted on the unit. Optional equipment packages available include abrasion protection, multi-view camera systems, auxiliary hose, LED light bars, magnet assemblies, and trailer tow hitch capability.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RFQ 2026-0008 – One (1) Terminal Ramp Sweeper
SPECIFICATIONS/REQUIREMENTS CONFIRMATION FORM
SPECIFICATIONS: Vendors are requested to initial or place a checkmark next to each requirement/specification that is applicable and inclusive with the vehicles. For any requirement or specification that is not included, please leave the corresponding circle blank and clearly note the exception on the designated Exceptions Sheet.
A complete copy of the specifications must be included in this section of your bid response and uploaded to Bonfire as part of your submission.
One (1) Terminal Ramp Sweeper o Parking Lot Sweeper mounted on a ¾ ton conventional cab chassis.
o Unit shall be new, current production model, manufactured in the USA.
o Gasoline Conventional Cab Chassis.
o Vinyl seats color factory standard o Vinyl floor covering black o Heavy-duty all-weather floor mats for vinyl flooring o Power windows and locks o Heat and air o AM/FM Stereo with Bluetooth and Dual USB Ports o Paint Color: Chrome Yellow o Unit shall be able to vacuum and sweep during wet or dry conditions o Simple operation and No CDL required.
o Height 78” Low profile: Conventional cab and hopper design for access to low clearance areas.
o Hydraulics Power System o Main pump type - Piston pump o Reservoir – Minimum 17 gal o Main system pressure – Minimum 3200 psi o Main pump drive - Direct drive from transmission PTO, Operates blower, dump door, and pick-up head o Hydraulic oil sight/temperature gauge o Blower: Aluminum alloy, high volume, open face turbine o Bearings - (2) Anti-friction o Housing - Steel w/abrasion resistant, replaceable liner o Drive - Hydraulic direct drive o Dust suppression system with w/30-gallon minimum water storage.
o Type - Cyclonic, multi-pass, centrifugal separation o Inspection/cleanout port w/ extended plug handle
Hopper: Low profile clearance for parking decks and other height restricted areas.
o Capacity (volumetric) – approximately 2.5 to 3 yards
Stainless Steel Hopper and Doors (non-magnetic):
o Hopper weldment o Hopper door o Inspection door o Skimmer hood o Slide-out hopper screen o Blower housing o Dust separator o Hopper drain o No clog Hopper screen o Auxiliary hand hose hardware o Hose Tube Pick up from Dump o Oversized hopper side access doors o Hopper abrasion plates o Dump door hydraulically opened/closed o Dump method - Hydraulic tilt o Dump direction – Rear o Hopper position indicator
Pick-Up Head o Type - Dual chamber o Width – Minimum 78 in o Pick-up head area – Minimum 1804 in2 o Suspension - (4) springs, (2) drag links o Skids – double row long life carbide o Suction hose diameter – min 10 in o Pressure hose diameter – min 10 in o Pressure bleeder - Cable operated o Reverse pick-up head system
Gutter Broom, Left o Curb broom o Drive - Constant speed non-reversible hydraulic motor o Adjustment - Adjustable for down pressure, pattern, and wear o Down pressure - Automatic o Flexibility - Integral anti-damage "swing away" relief valve o Broom - Poly wafer o Floodlight - LED o Parabolic mirror
Control System o Customizable user interfaced control panel o Interior Components - Pressure bleeder control, illuminated control switches: pick-up head, gutter broom, blower on/off (2 speeds), dust control water system nozzles (if applicable), safety lights o Exterior Components - Dump switch, Control Module
Safety/Warning Devices o Rear view camera system o LED Amber beacon light o Back-up alarm o Alternating LED bumper flashers o Directional LED caution displays o Work lights White LED 2000
Required Optional Equipment o Abrasion protection package o Multi-view high visibility camera system o Auxiliary fuse panel o Auxiliary hand hose 6 in dia.
o Backpack blower storage box o LED Light bar, low profile cab mounted o LED marker hopper lights o Magnet: Front and rear bumper mounted o Rubber Coated Blower o Shop air purge, dust control system o Water hose attachment o Trailer tow hitch, Class IV, 7 pin wiring
Warranty & Support o 5- year warranty shall apply for Sweeper o 5-year hydraulic warranty o Chassis 3 year/36,000 bumper to bumper warranty o Chassis Drive Train Warranty minimum 60 months/100,000 miles o Bidder shall provide documentation on local service, parts availability, and technical support.
o Bidder shall supply one sweeper operator’s manual and one sweeper parts and service manual on paper and one set on an electronic format.
o The manufacturer shall provide training courses for complete maintenance and operation of sweeper model bid at the manufacturer’s facility provided at no additional charge.
o The manufacturer should provide a video operator instruction/safety/maintenance procedure on an electronic format with the unit.
o The manufacturer should provide operators’ manual, parts manual, and service manual for vehicle chassis
**** Keys Required: 4 sets with FOBS at the time of delivery with each unit
**** No Dealer Decals
| One (1) Terminal Ramp Sweeper |
| **** Keys Required: 4 sets with FOBS at the time of delivery with each unit |
| **** No Dealer Decals |
File details come from the government source that posted it. Updated .