4_Exhibits-PrcScdl.xlsx

SUMMARY

Sec I & II

The Government’s estimated maximum daily requirements, excluding Saturday, Sunday; National, State, and local holidays are listed below by area of performance within each schedule. Offerors must complete the “Offeror’s Guaranteed Daily Capability”, which must equal or exceed the Government’s minimum acceptable daily capability, for all items within an area of performance for which they submit bids. Failure to do so will render the bid non responsive.

ZAMA 260 135

(a) The Government will consider all areas of performance described in paragraph (b) as including the Contractor's facility, regardless of geographical location.

(b) The Contractor shall perform services within the following defined areas of performance, which include terminals identified therein: Area within a radius of (XX) kilometers from the main gate of the Government installation (see the list below.)

Base Area within a radius of (XX) km From Drayage Beyond the Contract Areas of Performance

Exhibits for FA520921Q0033 Amendment 0002

Sec III Base

Item A001. Complete Service - Outbound (HHG): Services must include premove survey, servicing of appliances, disassembly of furniture, packaging, inventorying, tagging, wrapping, padding, packing and bracing of HHG in Government-owned and furnished shipping containers (Shipping Container Commercial Spec ASTM-D4169-16, SDDC Pamphlet 55-12) at owner’s residence, or at Government-furnished facility when ordered by the ordering officer, properly securing and sealing for shipment, weighing, obliterating old markings, marking, strapping, and drayage of the container within an area of performance. Contractor will complete a post walk around with members/employees to ensure no damage occurred during pack out. Service must also include loading of shipments on line-haul carrier’s equipment at the Government-furnished or contractor-furnished facility. When containers will not accommodate all articles of any one lot, loose articled must be packed in the said containers before any over-packed articles are placed therein. Overflow, oversize and other shipments must be paid for under Item A003.

SDDC Pamphlet 55-12

Container, Commercial Spec ASTM-D4169-16 or

Overseas Pack: Overflow Articles

Overseas Pack: Oversize Articles

Overseas Pack: Other Shipments

Overseas Pack: Oversize Articles Government-Furnished Containers:

Overseas Pack: Oversize Articles Government-Furnished Containers:

Overseas Pack: Other Shipments Government-Furnished Containers:

Overseas Pack: Other Shipments

Domestic Pack: Overflow Articles

Domestic Pack: Oversize Articles

Domestic Pack: Other Shipments

AG. Contractor-Furnished Containers:

AH.

Contractor-Furnished Containers:

Overseas Pack: Oversize Articles

Contractor-Furnished Containers:

Overseas Pack: Other Shipments

Item A004. Complete Service - Outbound (Unaccompanied Baggage (UB)): Service includes packaging, inventorying, packing in Government approved containers, weighing, strapping, obliteration of old markings, marking, and loading shipments on the linehaul carrier’s equipment. Service must be performed at owner’s residence. (Service may be performed at Government-furnished facility or contractor-furnished facility when ordered by the Ordering Officer.)

Drayage Included

Drayage Not Included

AE. Shipboard Pack outs: When outbound services under items A001, A003 and A004 are ordered for performance at the member’s/employee’s residence located on an ocean vessel, the contractor must pick up goods outside fence perimeter. (Due to contractor’s personnel liability and safety, and for security reasons.)

Item A010. Containers: Service must consist of the furnishing of the following types of new containers or specially constructed wooden crates. Containers furnished or specially constructed are to be assembled and ready for loading.

*When a specific container from the SDDC Pamphlet 55-12 is ordered, the order will indicate the appropriate SDDC approval number.

ea shpmt) (Unit:

ea shpmt)

AA. Moving and Placing Pianos or Organs: When moving and placing pianos or organs are involved for outbound services under Item A001, the Contractor shall be paid the unit price listed hereunder in addition to the rate of Item A001.

Note: The contractor must bill the Government for the requested/required third party services as a separate charge on the invoice supported by two (2) copies of the paid receipt/invoice from the third party.

service)

(Unit: per service)

point for one (1) shipment within the performance area.

ZAMA ¥0

YOKOSUKA ¥0

(HHGs)

(UB)

AC. Assembly/Disassembly of Government-Owned Containers: Contractor will assemble Government-owned containers. Component parts will be furnished by the Government. Contractor will disassemble Government-owned containers. Component parts will be put into a cloth bag and attached to the container. Knocked down container sections will be banded.

ea shpmt) (Unit:

Item A026. Reweighing: Service must consist of weighing the loaded containers prior to delivery and weighing the empty containers after delivery.

ea shpmt) (Unit:

Item A027. Drayage Beyond the Contract Area of Performance: Service must consist of drayage of packed shipments beyond the contract area of performance, not to exceed 600 kilometers. Kilometers must be computed on the shortest highway distance commencing with the applicable point of pickup to the outer boundary of the contract area of performance. Note: Contract area of performance: Refer to table below.

Item A028. Partial Withdrawal: Service must be the same as Item A015 above, except a partial removal of the items from the outer container will be performed at the Government-furnished or contractor-furnished facility. Articles not removed from the shipment will remain at the Government-furnished or contractor-furnished facility.

Item A029. Additional Services: The Contractor must provide additional services not included above, but required for satisfactory completion of the services ordered under this contract.

AA. Moving and Placing Pianos or Organs: When moving and placing pianos or organs are involved for inbound services under Item A015, the Contractor shall be paid the unit price listed hereunder in addition to the rate of Item A015.

Note: The contractor must bill the Government for the requested/required third party services as a separate charge on the invoice supported by two (2) copies of the paid receipt/invoice from the third party.

service)

(Unit: per

AE. Customs Clearance: The Contractor will clear customs when shipments become frustrated. The contractor must bill the Government as a separate charge on the invoice supported by two (2) copies of the paid receipt/invoice.

ea shpmt) (Unit:

AREA TOTAL

ZAMA ¥0

YOKOSUKA ¥0

Item A032. Attempted Pickup or Delivery: When the initial attempt to pickup or deliver a shipment at the owner’s residence is unsuccessful, charges apply provided the Contractor notified the ordering officer via telephone and provided that after Contractor’s notification, the ordering officer (a) cannot locate the owner within 30 minutes, (b) cannot have the owner at the residence within one hour after notification, and (c) the Contractor left a notice of attempted pickup or delivery at the residence.

AA. Moving and Placing Pianos or Organs: When moving and placing pianos or organs between residences are involved for local moves under Item A031, the contractor shall be paid the unit price listed hereunder in addition to the rate of Item A031.

Note: The contractor must bill the Government for the requested/required third party services as a separate charge on the invoice supported by two (2) copies of the paid receipt/invoice from the third party.

service)

(Unit: per

ZAMA ¥0

YOKOSUKA ¥0

SUB TOTAL OF SCHEDULE III (INTRA-CITY AND INTRA-MOVES)

OF BASIC PERIOD

CLIN AREA TOTAL

0001 ZAMA ¥0

0002 YOKOSUKA ¥0

TOTAL OF SCHEDULE I, II, AND III OF BASIC YEAR ¥0

Sec III Option1

Item B001. Complete Service - Outbound (HHG): Services must include premove survey, servicing of appliances, disassembly of furniture, packaging, inventorying, tagging, wrapping, padding, packing and bracing of HHG in Government-owned and furnished shipping containers (Shipping Container Commercial Spec ASTM-D4169-16, SDDC Pamphlet 55-12) at owner’s residence, or at Government-furnished facility when ordered by the ordering officer, properly securing and sealing for shipment, weighing, obliterating old markings, marking, strapping, and drayage of the container within an area of performance. Contractor will complete a post walk around with members/employees to ensure no damage occurred during pack out. Service must also include loading of shipments on line-haul carrier’s equipment at the Government-furnished or contractor-furnished facility. When containers will not accommodate all articles of any one lot, loose articled must be packed in the said containers before any over-packed articles are placed therein. Overflow, oversize and other shipments must be paid for under Item B003.

Container, Commercial Spec ASTM-D4169-16 or

Overseas Pack: Oversize Articles

Overseas Pack: Other Shipments

Overseas Pack: Oversize Articles Government-Furnished Containers:

Overseas Pack: Oversize Articles Government-Furnished Containers:

Overseas Pack: Other Shipments Government-Furnished Containers:

Overseas Pack: Other Shipments

AG. Contractor-Furnished Containers:

AH.

Contractor-Furnished Containers:

Overseas Pack: Oversize Articles

Contractor-Furnished Containers:

Overseas Pack: Other Shipments

Item B004. Complete Service - Outbound (Unaccompanied Baggage (UB)): Service includes packaging, inventorying, packing in Government approved containers, weighing, strapping, obliteration of old markings, marking, and loading shipments on the linehaul carrier’s equipment. Service must be performed at owner’s residence. (Service may be performed at Government-furnished facility or contractor-furnished facility when ordered by the Ordering Officer.)

AE. Shipboard Pack outs: When outbound services under items B001, B003 and B004 are ordered for performance at the member’s/employee’s residence located on an ocean vessel, the contractor must pick up goods outside fence perimeter. (Due to contractor’s personnel liability and safety, and for security reasons.)

Item B010. Containers: Service must consist of the furnishing of the following types of new containers or specially constructed wooden crates. Containers furnished or specially constructed are to be assembled and ready for loading.

*When a specific container from the SDDC Pamphlet 55-12 is ordered, the order will indicate the appropriate SDDC approval number.

ea shpmt) (Unit:

AA. Moving and Placing Pianos or Organs: When moving and placing pianos or organs are involved for outbound services under Item B001, the Contractor shall be paid the unit price listed hereunder in addition to the rate of Item B001.

Note: The contractor must bill the Government for the requested/required third party services as a separate charge on the invoice supported by two (2) copies of the paid receipt/invoice from the third party.

service)

(Unit: per

point for one (1) shipment within the performance area.

ZAMA ¥0

YOKOSUKA ¥0

(HHGs)

(UB)

AC. Assembly/Disassembly of Government-Owned Containers: Contractor will assemble Government-owned containers. Component parts will be furnished by the Government. Contractor will disassemble Government-owned containers. Component parts will be put into a cloth bag and attached to the container. Knocked down container sections will be banded.

ea shpmt) (Unit: