4.23 Exhibit 6 Unescorted Access Form 7394-B12.pdf

Exhibit No.: 6 Subcontract No.:

Jet Propulsion Laboratory California Institute of Technology

This document has been reviewed and determined not to contain export-controlled technical data.

1 JPL 7394-B12 Rev 4/22

Unescorted Access:

Subcontractor Badging Instructions and Requirements

(RFP/ITB Attachment B-12)

General Overview

JPL (“the Lab”), as a Government Prime Contractor and a Federally Funded Research and Development Center (FFRDC), requires that access by subcontractor personnel be controlled at all times. Subcontractor personnel requiring unescorted access to the Lab shall adhere to the instructions and requirements set forth in this document. Failure to comply with this document will result in denied access to the Lab. The three types of discrete badging processes are as follows:

Process 1: JPL Service and Construction Roster (Daily Badge) (1 to 29 days in a rolling 12 month period)

• Your JPL host or sponsor will initiate the daily JPL badge process for your Service and Construction Roster. Your company contact will then receive an email requesting completion of the Roster. This request includes general company information, the names and required personal information for each subcontractor personnel requiring access to the Lab.

• Upon successful electronic submission of the completed roster to JPL Protective Services Division (PSD), PSD will complete a National Crime Information Center (NCIC) inquiry. All individuals who pass this inquiry will be granted access to the Lab via the South Gate.

• At the South Gate guard station, the individual will check in, present valid ID, and be provided a Daily Badge.

• A 72 hour lead time is required for this process.

Process 2: Temporary Unescorted Access (Smartcard Badge) (30 to 179 days in a rolling 12 month period)

• The JPL host or sponsor will initiate the Service and Construction Roster (see above) process to provide daily access to the individual, while the Smartcard badge process is completed.

Lab access will be through the South Gate prior to receipt of the Smartcard badge.

• Once the completed Roster has been submitted electronically, JPL PSD will complete a National Crime Information Center (NCIC) inquiry. All individuals who pass this inquiry will be granted access to the Lab via the South Gate with a Daily Badge.

2 JPL 7394-B12 Rev 4/22

• The JPL host or sponsor will complete the JPL-ID onboarding request. Once completed, the subcontractor will receive an email requesting that all subcontractor personnel requiring access to the Lab schedule an appointment to complete “local” enrollment with the JPL Badge Office. During this local enrollment, the subcontractor personnel will provide:

o Original I-9 documents (i.e. Original Birth Certificate, Valid U.S. Passport, Naturalization certificate, Lawful Permanent Resident Card, DD214 with Date and Place of Birth) o Fingerprints o Photo

JPL’s Badge Office is located in building 249, Visitor Reception and open Monday through Thursday 7:00-4:45; Friday 7:00am to 3:45pm (closed for lunch 11:15am to 12:00pm).

• JPL PSD will print and issue a Smartcard badge to the subcontractor personnel. Access will remain via the South Gate.

Process 3: Long Term Unescorted Access (Smartcard Badge) (180-365 days in a rolling 12 month period)

• The JPL host or sponsor will complete the JPL-ID on-boarding request for an affiliate badge by completing Process 1 (see above).

• JPL PSD will complete a Position Risk Assessment. If approved, a National Crime Information Center (NCIC) inquiry will be completed by JPL PSD.

• If the NCIC is approved, the JPL host or sponsor will request the subcontractor personnel complete and submit the JPL Form 7375 to PSD, for both PSD and NASA Office of JPL Management and Oversight (NOJMO)review prior to completion of the Electronic Questionnaires for Investigations Processing (e-QIP) HSPD-12 processing at Personnel.Security@jpl.nasa.gov.

• Once PSD receives approval from NOJMO on the 7375, the subcontractor will receive an email and a link to complete the eQIP application; a user name and password will be provided..

• Once the completed Roster has been submitted electronically, JPL PSD will complete a NCIC inquiry. All individuals who pass this inquiry will be granted access to the Lab via the South Gate with a Daily Badge. The subcontractor will receive an email requesting that all individuals requiring access to the Lab schedule an appointment to complete Smartcard badge enrollment with the JPL Badge Office. During this Smartcard badge enrollment the subcontractor personnel will provide:

o Original I-9 documents (i.e. Original Birth Certificate, Valid U.S. Passport, Naturalization certificate, Lawful Permanent Resident Card, DD214 with Date and Place of Birth) o Fingerprints

3 JPL 7394-B12 Rev 4/22 o Photo (During the interim, the subcontractor personnel will be issued a Smartcard badge.)

• NOJMO receives the enrollment request and authorizes the Smartcard badge.

JPL PSD notifies the subcontractor when the Smart Card is ready for pickup via an email address provided by subcontractor.

Badges are to be issued from Badging Office in building 249 Visitor Reception.

• The subcontractor personnel approved for the Smartcard badge must call the JPL Badging Office for an appointment for Issuance of the badge. The Smartcard badge allows access to the Lab from all badge reader controlled turnstiles.

NOTE: If prior to subcontract execution, the JPL host or sponsor is aware or becomes informed that subcontractor personnel will or may require unescorted access to the Lab in excess of 179 days during a 365 day period, the JPL Subcontracts Manager will incorporate the Additional General Provision (AGP) Personal Identity Verification of Contractor Personnel into the subcontract. This AGP may be reviewed at the following:

Acquisitions-Division 26 Web Site: Terms & Conditions

Additional Information

• The JPL Form 7375 is required to be filled and submitted by the subcontractor for each subcontractor personnel requiring a Smartcard badge Badge. This form supports NOJMO’s review of the request for Smartcard badge prior to initiating the e-QIP process. The contents of the form are as follows:

Legal Name Company Name Physical Assessment Logical Assessment Start Date End Date Job Title Detailed Job Description Citizenship Alien Number Naturalization Number If Foreign National, has the individual been resident in the U.S. for three years or greater?

Requesting Type of Investigation (NACI or MBI) Justification for the Background Investigation Supervisor & Manager’s signature

• Electronic Questionnaires for Investigations Processing (e-QIP) system is a web-based automated system designed to facilitate the processing of standard investigative forms used https://acquisition.jpl.nasa.gov/tc/

4 JPL 7394-B12 Rev 4/22 when conducting background investigations for Federal security, suitability, fitness and credentialing purposes.

• HSPD-12, Homeland Security Presidential Directive 12: Policy for a Common Identification Standard for Federal Employees and Contractors

Sample Badges

5 JPL 7394-B12 Rev 4/22