4.0 26QS261 SOL.pdf

Solicitation/Contract Form Continuation

Sole Source OEM "Linear Motion, LLC" - Ball Nut Assembly Parts

This Solicitation is a SOLE SOURCE requirement for the procurement of “OEM Linear Motion, LLC” - Ball Nut Assembly Parts.

1. NOTICE TO ALL OFFERORS: The Government anticipates awarding a Firm-Fixed Price Supply-Type Purchase Order, in accordance with FAR Part 12, to quotes received in response to this solicitation. A Firm- Fixed Price Supply-Type Purchase Order places the maximum risk and full responsibility for all costs and resulting profit or loss on the contractor; offerors are advised to consider these risks when pricing their quotes.

2. See block 8 on page 1 of the solicitation for the closing date and time.

3. The deadline for submission of questions regarding the solicitation's terms, conditions, specifications; is two

(2) days prior to the solicitation's closing date. Please submit any questions/concerns to the Contract Specialist listed below -

Name: Walid Aslan Email: walid.m.aslan.civ@us.navy.mil

4. EVALUATION: In accordance with FAR subpart 12.203, the Government will select the most advantageous offer based on the following evaluation factors: technical including delivery date, price, and past performance in no order of relative importance.

5. EXCEPTIONS: All quoters MUST note all exceptions from the solicitation's terms, conditions, and/or specifications. It will be assumed that any quote without mention of any exceptions will take no exception from all specifications, terms and conditions, clauses, or provisions within the solicitation.

6. Submission of invoices will be via WAWF; see Clause 252.232-7006.

PLEASE PROVIDE THE FOLLOWING:

Name:

SAM.gov Registered CAGE Number:

E-mail Address:

Phone Number:

Company Size: Small OR “Other Than Small”

Your company must be registered within SAM (System for Award Management) in order to receive a Government award (https://sam.gov).

I. INTRODUCTION

For this FOB Origin procurement, the Government will arrange for transportation and pay all associated transportation costs through the NAVSUP WSS Shipment Processing (SP) office (aka NAVSUP GLS, NAVSUP LOC or NOLSC). NAVSUP WSS will process shipments of materials from within the United States to CONUS (Continental United States)/OCONUS (Outside Continental United States) consignees with delivery terms Free On-Board (FOB) Origin.

N0040626QS261

Contractors/vendors shall complete the Naval Supply Systems Command automated Ready-to-Ship (RTS) web form by accessing the link provided below in Section II. By completing the form online, the NAVSUP WSS at Norfolk, VA will receive an email of the shipment request immediately and will act on it as soon as possible during their normal working hours of 7:30 AM to 6:00 PM Eastern Time Monday through Friday. In response, NAVSUP WSS will provide MANDATORY USE shipping labels to the contractor/vendor. The contractor /vendor will arrange for shipment with the NAVSUP WSS designated carrier IMMEDIATELY upon receipt of the shipping labels. If the NAVSUP WSS provided shipping labels are not used, the contractor/vendor will experience delays and additional work to reconcile the transportation payment under the NAVSUP WSS tracking number and possible additional costs not covered under the contract or NAVSUP WSS Transportation.

If the contractor/vendor turns an ordered vehicle away and a vehicle furnished not used charge is incurred the contractor/vendor is responsible for payment. If the contractor/vendor detains the vehicle and incurs a detention charge the contractor/vendor is responsible for payment. International small parcel shipment documents are invalid after five business days. If the vendor incurs any extra costs with the carrier outside of the CBL/GBL it is the vendors responsibility for payment. NAVSUP WSS does not accept hazardous or explosive shipments.

CONTRACTORS/VENDORS ARE NOT AUTHORIZED TO ARRANGE FOR TRANSPORTATION OR

PAY TRANSPORTATION COSTS FOR SHIPMENT OF FOB ORIGIN PROCUREMENT.

II. PROCEDURES FOR CONTRACTORS TO REQUEST READY-TO-SHIP (RTS) NOTICES

When the cargo is ready for shipment, the contractor/vendor will submit their shipping request to NAVSUP WSS using the following procedures: Click on the link at https://mynavsup-public.nag.navy.mil/public /ops$mailer.ready_to_ship_form to open the NAVSUP WSS RTS Web Form. The contractor/vendor is required to fill in all data fields marked with a red asterisk under the headings "Vendor Information" and "Package Information." The fields not marked with a red asterisk and the heading "Additional Notes" are optional fields to be filled in at the contractor's/vendor's discretion. Click on the blue question mark at the right of each data field to access "On-line Data Element Help" which explains the data required in that field. If shipping labels are being requested for multiple packages, enter the data for the first package under "Package Information" then click the "Store Pkg Info" button. Repeat this procedure for each package. When all data has been entered on the electronic form, click the "Submit" button.

Container Shipments: containers take longer to book and arrange for loading. If you can provide reliable dimensions and weight estimates for the cargo, send the initial shipping request THREE WEEKS before your requested container load date.

If you have any questions regarding the web form, contact NAVSUP WSS Transportation directly at (757) 443- 5449 or usn.norfolk.navsupwssnorf.mbx.navsup-nfmgt1@us.navy.mil NOTE: Incomplete or missing information will significantly delay the process of arranging transportation.

III. CONTRACTING OFFICER SHALL PROVIDE THE FOLLOWING INFORMATION:

*Information provided at time of Award.

Contract Number: ____________________________________ Transportation Control Number (TCN): N62758 Transportation Priority (TP): 1 Required Delivery Date (RDD): _________________________ Transportation Account Code (TAC): ____________________ Destination DODAAC: N62758

IV. NAVSUP WSS CONTACT INFORMATION

NOTE: The preferred method of contact is through email. Phone numbers are provided only for emergencies.

For Assistance Email (preferred): navsup_nfmgt.fct@navy.mil Fax: (757) 443-5517 Phone: (757) 443-5449 Business Hours: M-F 7:00 AM to 3:30 PM ET.

Continuation of Supplies or Services and Prices/Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

BALL NUT ASSEMBLY

T/M: S9585-AH-OMI-010, FIGURE & INDEX NO: 7-8-2

LENGTH: 12.938" MIN - 13.062" MAX

CONSIST OF THE FOLLOWING ITEMS:

SLEEVE, DEFLECTOR, CLAMP, BALL NUT, BALLS AND

GUIDE

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Manufacturer's Name: Linear Motion, LLC Pricing Arrangement: Firm Fixed Price

20 Each

Continuation of Description

Requirements Sole Source OEM Linear Motion, LLC - Ball Nut Assembly Parts for SRF-JRMC Yokosuka

Continuation of Packaging and Marking

Continuation of Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: Acceptance and Inspection will be conducted in accordance with contract terms and conditions.

DoDAAC: N62758 CountryCode: JPN

SRF AND JRMC YOKOSUKA

PHONE 011-81-46-816-9177, 1 CHOME HON CHO BLDG A61

YOKOSUKA 238-0041

JAPAN

Continuation of Deliveries or Performance

Overall Contract Delivery Period

Government Origin (Shipping Point)

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery On Or Before Delivery Date 30 Apr

20 Each Ship To DoDAAC: N62758 CountryCode: JPN

SRF AND JRMC YOKOSUKA

PHONE 011-81-46-816-9177, 1 CHOME HON CHO

BLDG A61

YOKOSUKA 238-0041

JAPAN

FoB Details Government Origin (Shipping Point)

Continuation of Accounting and Appropriation Data

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.204-13 System for Award Management-Maintenance. (Deviation) Feb 2026 52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation) Feb 2026 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation)

Feb 2026

52.222-19 Child Labor-Cooperation with Authorities and Remedies. (Deviation) Feb 2026 52.222-35 Equal Opportunity for Veterans. (Deviation) Feb 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation) Feb 2026 52.222-37 Employment Reports on Veterans. (Deviation) Feb 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation) Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.232-7010 Levies on Contract Payments. Dec 2006 252.246-7003 Notification of Potential Safety Issues. Jan 2023 252.247-7023 Transportation of Supplies by Sea. Oct 2024 252.205-7000 Provision of Information to Cooperative Agreement Holders. Oct 2024

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

As prescribed in 211.274-5(a), use the following clause:

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at . https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .____

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .____

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) . Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier; (1)

Serialize within the part, lot, or batch number; or (2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (3)

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site /uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , Unique Item Identifier Report for Embedded ____ Items, Contract Data Requirements List, DD Form 1423.

(g) . If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with Subcontracts paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.

WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

N/A

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

COMBO

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.

when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC *PROVIDED AT AWARD

Issue By DoDAAC *PROVIDED AT AWARD

Admin DoDAAC *PROVIDED AT AWARD

Inspect By DoDAAC *PROVIDED AT AWARD

Ship To Code *PROVIDED AT AWARD

Ship From Code *PROVIDED AT AWARD

Mark For Code *PROVIDED AT AWARD

Service Approver (DoDAAC) *PROVIDED AT AWARD

Service Acceptor (DoDAAC) *PROVIDED AT AWARD

Accept at Other DoDAAC *PROVIDED AT AWARD

LPO DoDAAC *PROVIDED AT AWARD

DCAA Auditor DoDAAC *PROVIDED AT AWARD

Other DoDAAC(s) *PROVIDED AT AWARD

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

*PROVIDED AT AWARD

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Addendum to 52.212-4, Contract Terms and Conditions - Commercial Products and Commercial Services

Contract Terms and Conditions Required To Implement Statutes or Executive Orders — Commercial Products and Commercial Services

Addendum to Contract Clauses

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.240-91 Security Prohibitions and Exclusions. (Deviation) Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.225-7012 Preference for Certain Domestic Commodities. Apr 2022

252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information.

Jan 2023

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

(DEVIATION 2024-O0013 REVISION 1)

May 2024 Deviation 2024-O0013 May 2024

List of Contract Documents, Exhibits, or Attachments

Solicitation Provisions

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7005 Representation Relating to Compensation of Former DoD Officials. Sep 2022 252.204-7024 Notice on the Use of the Supplier Performance Risk System. Mar 2023

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region- Representation.

Jun 2023

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. Oct 2016

DFARS Clauses Incorporated by Full Text

252.204-7016 Covered Defense Telecommunications Equipment or Services-Representation. (Dec 2019)

COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES-REPRESENTATION (DEC 2019)

(a) . As used in this provision, "covered defense telecommunications equipment or services" has the meaning provided in the clause Definitions 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

(b) . The Offeror shall review the list of excluded parties in the System for Award Management (SAM) ( ) for Procedures https://www.sam.gov entities excluded from receiving federal awards for "covered defense telecommunications equipment or services".

(c) . The Offeror represents that it does, does not provide covered defense telecommunications equipment or services as a Representation part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(End of provision)

Addendum to 52.212-1, Instructions to Offerors - Commercial Products and Commercial Services

Evaluation - Commercial Products and Commercial Services

FAR Clauses Incorporated by Full Text

52.212-2 Evaluation-Commercial Products and Commercial Services. (Deviation) (Feb 2026)

Evaluation-Commercial Products and Commercial Services (Feb 2026) (Deviation)

(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered.

(b) . The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the Options (if applicable) basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).

(c) . A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for acceptance specified in Notice of award the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

FLCPS SRF 007 FLCPS_SRF_DELIVERY (Aug 2025)

PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)

(a) shall be in accordance with ASTM-D-3951 (most current edition), "Standard for Commercial Packing." The Preservation, packaging, and packing unit pack quantity that applies to items under this contract is "Industry Standard".

(b) The use of asbestos, excelsior, loose fill polystyrene, newspaper or shredded paper (all types including waxed paper, Prohibited Packing Materials.

computer paper and similar hydroscopic or non-neutral material) is prohibited.

(c) All non-manufactured wood utilized in wood pallets and wood containers shall be heat treated to a minimum Non-Manufactured Wood Packing.

core temperature of 56 degrees centigrade for 30 minutes and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC). Refer to https://www.aphis.usda.gov/aphis/ourfocus/planthealth/import-information/wood-packaging-material for wood packing policy, enforcement regulations and accredited agencies. Non-coniferous (hardwood) and manufactured wood, such as particleboard and plywood, are exempt from this requirement.

(d) , such as particleboard and plywood, are exempt from this requirement.Manufactured wood

(e) Packing must be sufficient to ensure safe delivery to the final destination without the need for additional repackaging or repair.

(f) All materials shall be packed to withstand multiple modes of transport (truck, rail, sea, or air) and handling by forklifts or cranes.

(g) Heavy items must be crated or skid-mounted to distribute weight evenly and ensure lifting point are accessible and marked.

(h) Packages must be stable, not exceed safe stacking limits, and be secured against movement in transit.

MARKING OF SHIPMENTS (COMMERCIALLY PACKAGED ITEMS)

(i) Marking shall be in accordance with ASTM-D-3951 (most current edition) and with the information set forth in paragraph (ii) below. Unless specified elsewhere in this contract/order, bar coding is not required.

(ii) All unit and exterior containers/packs shall, as a minimum, be marked as follows:

1. National stock number (NSN), when available, or Federal stock number (FSN), when NSN is not available, or part number when neither NSN or FSN are available.

2. Noun nomenclature cited on contract or order.

3. Quantity and unit of issue.

4. Contract, or order number.

5. From:_______________________________________________ (Contractor's Name) (Address)

6. To: (See delivery address on page 3-4 or in Section F)

(iii) Markings may be applied by any means which provide legibility.

TRACEABLE FREIGHT

The Contractor shall assume all responsibility for shipment to the specified destination. Shipment must be via a fully traceable commercial freight method. Traceable freight means that the shipment is registered upon shipment with an identifying number. The number is for location of the shipment at any point in transit, including final destination, and verifies shipment arrival at the specified destination. If a shipping method does not provide traceability as defined above, it shall not be used.

INSPECTION AND ACCEPTANCE (DESTINATION)

Inspection and acceptance of the supplies or services to be furnished hereunder shall be made at destination by the receiving activity.

PROOF OF DELIVERY

If United Parcel Service (UPS) or Federal Express services are used for transportation, each package must have a unique package identification number. The Government will not consider the manifest as proof of delivery unless each package can be uniquely identified. Acceptance will occur only after the Government can verify actual receipt of the contract items--packaged, marked and labeled as required elsewhere in this contract.

4. If an item offered for transportation falls within the guidelines of a limited quantity and is not regulated by the applicable mode Limited Quantities.

of transportation, it shall be packaged to meet the requirements of Level A packaging listed in MIL-STD-2073-1.

5. In addition to the above, packaging (container and containment components) designs shall pass all applicable performance-oriented packaging (POP) tests in accordance with Title 49 CFR, the ICAO, IATA or IMDGC. Compressed gases are excluded from these tests. Each packaging of acceptable design shall bear certification markings outlined in the regulations. All certificates and test reports denoting test compliance shall be available for inspection by authorized government representatives.

6. Contractors shall submit any discrepancies between contractually specified packaging procedures and Title 49 requirements to the Contracting Officer for review and evaluation.

7. All non-manufactured wood utilized in wood pallets and wood containers shall be heat treated to a minimum Non-Manufactured Wood Packing.

core temperature of 56 degrees centigrade for 30 minutes and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC). Refer to www.aphis.usda.gov/ppq/swp/eunmwp.html for wood packing policy, enforcement regulations and accredited agencies.

Non-coniferous (hardwood) and manufactured wood, such as particleboard and plywood, are exempt from this requirement.

INSPECTION AND ACCEPTANCE (DESTINATION)

Inspection and acceptance of the supplies or services to be furnished hereunder shall be made at destination by the receiving activity.

PROOF OF DELIVERY

If United Parcel Service (UPS) or Federal Express services are used for transportation, each package must have a unique package identification number. The Government will not consider the manifest as proof of delivery unless each package can be uniquely identified. Acceptance will occur only after the Government can verify actual receipt of the contract items--packaged, marked and labeled as required elsewhere in this contract.

Addendum to Evaluation - Commercial Product and Commercial Services

Offeror Representations and Certifications - Commercial Products and Commercial Services

Addendum to Solicitation Provisions

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.204-7 System for Award Management-Registration. (Deviation) Feb 2026

52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions.

Sep 2024

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation.

Jan 2017

52.222-50 Combating Trafficking in Persons. (Deviation) Feb 2026 52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation) Feb 2026