4-!-DA27005-27308050 DFCM Addendum 1.pdf

DFCM Addendum Cover Page, 2.26.2026

DFCM Addendum #1 Reference: World Trade Center 3rd Floor GOED Tenant Improvements

CPB - GOED

DFCM Project #27308050 U3P Event #DA27005

Date: July 22, 2026

To: Invited Contractors

From: The Division of Facilities Construction and Management

Note: This Addendum shall be included as part of the Contract Documents. Items in this Addendum apply to all drawings and specification sections whether referenced or not involving the portion of the work added, deleted, modified, or otherwise addressed in the Addendum. Bidders are required to acknowledge receipt of this Addendum when their bid is submitted. Failure to do so may subject the Bidder to disqualification.

Addendum Items

Solicitation Schedule Changes: There are no changes to the Solicitation Schedule in this addendum.

DFCM Addendum Items: N/A

Click to enter text Click to enter text Click to enter text

A/E Addendum Items: A/E Addendum # 1, dated 7.20.2026 Click to enter text

Total Attached Pages: 11

ADDENDUM#1

ajc architects

703 East 1700 South 7/20/2026

Salt Lake City, Utah 84105 GOED – World Trade Center 3rd. Floor Renovation www.ajcarchitects.com Project # 2026-24

Addendum

703 E 1700 S Salt Lake City, Utah 84105 801.466.8818 www.ajcarchitecture.com

Sent By Aid Korkut

Agency Contact

DFCM Levi Waldron lwaldron@utah.gov

Revisions to Project Drawings

I. (6) Architectural: G001, A101, A121, A131, A600, A700

II. (1) Mechanical: ME101

Attachments

This Addendum consists of this cover sheet, Architectural Narrative, Mechanical changes/clarification letter,

(7) full-size drawings, This addendum, issued with written comments, drawings, and/or specifications, is for all persons preparing Bids for the project and, as enumerated herein, shall be included in the Contractor’s Bid; this addendum becomes a part of the

Contract Documents and modifies the original bidding documents. Bidders should acknowledge receipt of this Addendum on the Contractor's Bid Form. Failure to do so may subject the Bidder to disqualification. In case of any conflict between the drawings, specifications, and this addendum, the latest addendum shall govern. All changes, corrections, deletions, and/or additions to the initial bidding documents shall govern. All changes, corrections, deletions, and/or additions to the initial bidding documents shall be included in the Bidder’s proposal. This review does not relieve the contractor or supplier of the responsibility of conforming to the drawings and specifications, nor does it relieve the contractor of the requirements of the specifications for coordination with other trades. All dimensions shall be confirmed and correlated at the job site.

The Contractor shall be responsible for verifying existing conditions and the suitability of “equivalent” products for the specified application.

703 E 1700 S Salt Lake City, Utah 84105 801.466.8818 www.ajcarchitects.com

Addendum #1

Architectural Narrative

703 East 1700 South 7/20/2026

Salt Lake City, Utah 84105 GOED – World Trade Center 3rd Floor Renovation www.ajcarchitects.com Project # 2026-24

Recorded By Aid Korkut

Recipient Contact

DFCM Levi Waldron lwaldron@utah.gov

385.266.5384

Description G001 List of deferred submittals updated

A101 Clarified the reuse of the existing door for the new electrical closet;

Clarified the application of privacy film at glazed assemblies.

Clarified gypsum board patching and repair requirements at existing walls.

A121 Clarified the reuse of existing finish materials.

Clarified finish treatment for the existing hallway wall affected by the new work.

A131 Clarified the reuse of existing ceiling finish materials.

A600 Clarified the reuse of existing door frames and the application of privacy film.

A700 Updated the signage plan in accordance with the Owner's comments.

A L L I

D E

A S

D

E S

IG

N

S A

R R

A N

G E

M E

N T S

A N

D P

L A

N S

I N

D

IC

A T E

D O

R R

E P

R E

S E

N T E

D B

Y T

H

IS

D R

A W

IN

G

A R

E O

W N

E D

B Y

A N

D T

H E

P R

O P

E R

T Y

O F

A

JC

A R

C H

IT

E

C T S

P C

A N

D W

E R

E C

R E

A T E

D E

V O

L V

E D

A

N D

D E

V E

L O

P E

D F

O R

U S

E O

N A

N D

I N

C O

N N

E C

T

IO

N W

IT

H

T H

E S

P E

C

IF

IE

D

P R

O

JE

C T

N O

N E

O F

T H

E I D

E A

S

D E

S

IG

N S

A

R R

A N

G E

M E

N T S

O R

P L A

N S

S H

A L L B

E U

S E

D B

Y O

R D

IS

C

L O

S E

D T

O A

N Y

P E

R S

O N

F

IR

M

O

R C

O R

P O

R A

T

IO

N F

O R

A N

Y P

U R

P O

S E

W H

A T S

O E

V E

R W

IT

H

O U

T W

R

IT

T E

N C

O N

S E

N T O

F A

JC

A

R C

H

IT

E C

T S

P C

W

R

IT

T E

N D

IM

E

N S

IO

N

S O

N T

H E

S E

D R

A W

IN

G

S S

H A

H

V E

P R

E C

E D

E N

C E

O V

E R

S C

A L E

D

IM

E N

S

IO

N S

C

O N

T R

A C

T O

R S

S H

A L L V

E R

IF

Y

A N

D B

E R

E S

P O

N S

IB

L E

F O

R A

L L D

IM

E

N S

IO

N

S A

N D

C O

N D

IT

IO

N S

O N

T H

E J

O B

A N

D T

H

IS

O F

F

IC

E M

U S

T B

E N

O T

IF

IE

D

O F

A N

Y V

A R

IA

T

IO

N F

R O

M T

H E

D

IM

E N

S

IO

N S

A N

D C

O N

D

IT

IO

N

S S

H O

W N

B Y

T H

E S

E

D R

A W

IN

G

S W

A R

N

IN

G R

E P

R O

D U

C T

IO

N H

E R

E O

F I S

A C

R

IM

IN

A

L O

F F

E N

S E

U N

D E

R

U

.S .C

S

E C

U

N A

U T H

O R

IZ

E

D D

IS

C

L O

S U

R E

M A

Y C

O N

S T

IT

U T E

T R

A D

E S

E C

R E

T M

IS

A

P P

R O

P R

IA

T

IO

N I N

V

IO

L A

T

IO

N O

F I .C

.2

-2 -3

-1

E T

S E

Q

A N

D O

T H

E R

L A

W S

SHEET NUMBER:

ISSUE DATE:

ISSUE TYPE:

DRAWN BY:

CHECKED BY:

PROJECT#:

PROJECT DESCRIPTION

SHEET NAME:

REVISIONS

ARCHITECT / CONSULTANT

703 east 1700 south salt lake city, ut 84105 ajcarchitects.com

AHJ

A u to d e sk

D o cs

/2

-2

D

FC

M

-G O

E D

R e lo ca ti o n

T I/

G O

E D

R e lo ca ti o n

T I.r vt

/2

/2

:4

:4

P

M

7/8/2026

PERMIT SET

ajc

K. RIGBY

G001

2026-24

60 E SOUTH TEMPLE

SALT LAKE CITY, UT 84150

WORLD TRADE CENTER -

GOED TI

INDEX AND GENERAL

NOTES

GENERAL NOTES:

1 THE GENERAL CONTRACTOR SHALL HEREAFTER BE REFERRED TO AS "GENERAL

CONTRACTOR" OR "GC". THE OWNER MAY HEREAFTER BE REFERRED TO AS "OWNER".

2 THE GENERAL CONTRACTOR IS RESPONSIBLE FOR ALL WORK REGARDLESS OF THE

LOCATION OF THE INFORMATION IN THE DOCUMENTS. THE GENERAL CONTRACTOR

SHALL UTILIZE THE COMPLETE & ENTIRE CONSTRUCTION DRAWINGS AND WRITTEN

SPECIFICATIONS FOR ALL REQUIRED INFORMATION TO PROVIDE COMPLETE

CONSTRUCTION OF THIS PROJECT AND IS RESPONSIBLE TO COORDINATE ALL DRAWINGS

AND SPECIFICATIONS WITH ALL SUBCONTRACTORS REGARDLESS OF LOCATION IN

CONTRACT DOCUMENTS. ITEMS LISTED IN DRAWINGS MAY NOT BE INCLUDED IN

SPECIFICATIONS. ITEMS LISTED IN SPECIFICATIONS MAY NOT BE INCLUDED IN

DRAWINGS.

3 UNLESS OTHERWISE INDICATED IN THE CONSTRUCTION DOCUMENTS AS BEING NOT IN

CONTRACT (N.I.C.) OR EXISTING, ALL ITEMS, MATERIALS AND INSTALLATION OF SAME

ARE PART OF THE CONTRACT AS DEFINED BY THE ENTIRE CONSTRUCTION DOCUMENTS

AND SPECIFICATIONS. THE GC SHALL PROVIDE AND INSTALL ALL ACCESSORIES,

COMPONENTS AND ASSEMBLIES REQUIRED FOR THE WORK DEPICTED OR SPECIFIED.

4 THE GENERAL CONTRACTOR SHALL FIELD VERIFY ALL CONDITIONS AND DIMENSIONS

PRIOR TO BEGINNING ANY WORK AND SHALL BE RESPONSIBLE FOR ALL WORK AND

MATERIALS INCLUDING THOSE FURNISHED BY SUBCONTRACTORS. THE GC SHALL

ACCEPT PREMISES AS FOUND. OWNER WILL MAINTAIN THE EXISTING CONDITION OF THE

SITE AND EXISTING STRUCTURES AT THE TIME OF BIDDING.

5 DISCREPANCIES BETWEEN PORTIONS OF THE CONTRACT DOCUMENTS ARE NOT

INTENDED. THE GENERAL CONTRACTOR IS TO CLARIFY WITH THE ARCHITECT ANY SUCH

DISCREPANCIES DURING BIDDING AND PRIOR TO COMMENCING WORK.

6 DIMENSIONS TAKE PRECEDENCE OVER DRAWINGS: DO NOT SCALE DRAWINGS TO

DETERMINE ANY LOCATIONS. THE ARCHITECT SHALL BE NOTIFIED OF ANY DISCREPANCY

PRIOR TO CONTINUING WITH WORK. CHANGES IN THE WORK TO BE DOCUMENTED IN

WRITING AND APPROVED IN WRITING PRIOR TO BEING STARTED - (IMPLEMENTED)

7 ALL PLAN DIMENSIONS ARE FROM GRIDLINE OR FACE OF STUD OR FACE OF BLOCK

UNLESS OTHERWISE INDICATED. SEE SECTION ON "DIMENSIONING" THIS SHEET.

8 THE CONTRACTOR SHALL REPORT TO THE ARCHITECT ALL CONDITIONS REQUIRING

COORDINATION/ CHANGES WITH THE CONTRACT DOCUMENTS. COORDINATION /

APPROVAL SHALL TAKE PLACE BEFORE THE WORK BEGINS. ALL CHANGES TO THE

CONTRACT COST SHALL BE APPROVED THROUGH A CHANGE ORDER.

9 DETAILED DRAWINGS AND LARGER SCALE DRAWINGS TAKE PRECEDENCE OVER SMALL

SCALE DRAWINGS.

10 THE ARCHITECT WILL REVIEW SHOP DRAWINGS AND SAMPLES FOR CONFORMANCE

WITH DESIGN CONCEPT OF THE PROJECT. THE ARCHITECT'S REVIEW OF A SEPARATE

ITEM SHALL NOT INDICATE APPROVAL OF AN ASSEMBLY IN WHICH THE ITEM FUNCTIONS.

THE ARCHITECT WILL NOT REVIEW SHOP DRAWINGS UNTIL THE GC HAS REVIEWED AND

STAMPED THE SHOP DRAWING/SUBMITTAL. THE GC IS RESPONSIBLE FOR FIELD

VERIFYING ALL DIMENSIONS SHOWN ON THE SHOP DRAWINGS. THE ARCHITECT'S

REVIEW OF THE SHOP DRAWINGS SHALL NOT OVERRIDE THE CONDITIONS DESCRIBED IN

THE CONTRACT DOCUMENTS UNLESS SPECIFICALLY NOTED OTHERWISE BY THE

ARCHITECT. WORK SHALL NOT PROCEED WITHOUT RETURNED REVIEWED SUBMITTALS.

11 FOR CONSTRUCTION DETAILS NOT SHOWN, USE THE MANUFACTURER'S STANDARD

DETAILS OR APPROVED SHOP DRAWINGS / DATA SHEETS IN ACCORDANCE WITH THE

PROJECT SPECIFICATIONS.

12 FOR GRADING, TRENCHING ETC., CONTACT THE ARCHITECT FOR INSTRUCTIONS PRIOR

TO THE CONTINUATION OF WORK SHOULD ANY UNUSUAL CONDITIONS BECOME

APPARENT DURING GRADING OR FOUNDATION CONSTRUCTION. EXISTING ELEVATIONS

AND LOCATIONS TO BE JOINED SHALL BE VERIFIED BY THE GENERAL CONTRACTOR

BEFORE CONSTRUCTION.

13 ALL WORK, MATERIALS AND METHODS SHALL BE IN CONFORMANCE WITH THE CODES,

ORDINANCES AND REGULATIONS OF ALL GOVERNMENTAL AGENCIES HAVING

JURISDICTION AT THE PROJECT LOCATION. THE GENERAL CONTRACTOR MUST COMPLY

WITH THE CONTRACTOR REGISTRATION REQUIREMENTS OF ALL GOVERNING

AUTHORITIES.

14 ALL PROJECT CONSTRUCTION SHALL CONFORM WITH ANSI A-117.1-2009, AND THE

AMERICANS WITH DISABILITIES ACT (ADA).

15 THE GENERAL CONTRACTOR SHALL NOTIFY ALL APPLICABLE LOCAL GOVERNING

AUTHORITIES AND UTILITIES PRIOR TO COVERING UP ANY WORK REQUIRING

INSPECTION.

16 THE GENERAL CONTRACTOR SHALL MAINTAIN ALL REQUIRED EXITS AND FIRE LANES IN

WORKING ORDER.

17 A GENERAL BUILDING PERMIT IS REQUIRED. ALL PERMITS OR CONNECTION FEES SHALL

BE SECURED BY THE GENERAL CONTRACTOR AND REIMBURSED THROUGH THE OWNER.

18 THE GENERAL CONTRACTOR SHALL PROVIDE AND INSTALL FIRE EXTINGUISHERS WHERE

SHOWN ON PLAN.

19 MINIMUM FLAME SPREAD CLASSIFICATION OF INTERIOR FINISH SHALL CONFORM TO

THE BUILDING CODE AND LOCAL GOVERNING BUILDING CODES/ORDINANCES. SEE

CODE SUMMARY, SHEET G1002.

20 THE GENERAL CONTRACTOR SHALL PROVIDE AND IS SOLELY RESPONSIBLE AND LIABLE

FOR PUBLIC AND EMPLOYEE PROTECTION AS NECESSARY AND AS REQUIRED BY THE

CODES, INCLUDING EXTERIOR AND INTERIOR PEDESTRIAN TRAFFIC BARRIERS. ALL

WORK SHALL CONFORM TO THE ORDINANCES AND REGULATIONS OF GOVERNMENTAL

AGENCIES HAVING JURISDICTION AT THE PROJECT.

21 THE GENERAL CONTRACTOR SHALL PROVIDE TEMPORARY BARRICADES FOR DUST AND

NOISE CONTROL, AND ALL REQUIRED ENVIRONMENTAL PROTECTION WHERE WORK

JOINS EXISTING CONDITIONS.

22 ALL DEBRIS SHALL BE REMOVED FROM PREMISES AND ALL AREAS SHALL BE LEFT IN A

CLEAN (BROOM) CONDITION DAILY.

23 IT SHALL BE THE RESPONSIBILITY OF THE GENERAL CONTRACTOR TO COORDINATE AND

OR CALL BLUE STAKES TO LOCATE ALL EXISTING UTILITIES, WHETHER SHOWN HEREIN

OR NOT, AND WHEN IDENTIFIED TO PROTECT THEM FROM DAMAGE. THE GENERAL

CONTRACTOR SHALL BEAR ALL EXPENSE OF REPAIR OR REPLACEMENT OF IDENTIFIED

UTILITIES OR OTHER PROPERTY DAMAGED BY OPERATIONS IN CONJUNCTION WITH THE

EXECUTION OF THE WORK.

24 APPROVED PLANS SHALL BE KEPT IN A PLAN BOX AND SHALL NOT BE USED BY

WORKMEN. ALL CONSTRUCTION SETS SHALL REFLECT THE SAME INFORMATION. THE

GENERAL CONTRACTOR SHALL ALSO MAINTAIN, IN GOOD CONDITION, ONE COMPLETE

SET OF PLANS WITH ALL REVISIONS, ADDENDA AND CHANGE ORDERS, ON THE

PREMISES AT ALL TIMES. THESE ARE TO BE KEPT UNDER THE CARE OF THE JOB

SUPERINTENDENT.

NOTES TO BIDDERS:

SCOPE OF WORK:

DEFERRED SUBMITTALS:

1. BUILDING FIRE SPRINKLER SYSTEM MODIFICATIONS

2. BUILDING FIRE ALARM SYSTEM WORK.

3. MEP SEISMIC ANCHORING AND BRACING.

GENERAL NOTES:

NEW TENANT IMPROVEMENT WITHIN THE EXISTING WORLD TRADE CENTER TOWER ON THE

3TH FLOOR, WEST SIDE OF THE FLOOR. CONSTRUCTION IS A SET OF PRIVATE OFFICES,

CONFERENCE ROOM, AND OPEN OFFICE AREA OF TYPICAL CONSTRUCTION AND AVERAGE

FINISH LEVELS.

EXISTING SPACE WILL NEED TO BE FIELD VERIFIED, MEASURED, AND MODIFIED TO COMPLETE

PROJECT, INCLUDING PLUMBING AND MECHANICAL PENETRATIONS AND NEW FINISHES ON

EXISTING WALLS. CONTRACTOR IS TO ENSURE ENTIRE SPACE IS OF NEW QUALITY AND FINISH

LEVEL, ALL EXISTING EXPOSED SURFACES TO RECEIVE PAINT OR NEW FINISHES, SEE FINISH

PLANS.

FURNITURE AND MOST APPLIANCES ARE FOR REFERENCE ONLY AND WILL BE OWNER

PROVIDED.

CONTRACTOR, SUBCONTRACTOR, VENDOR OR ANY OTHER PERSON PARTICIPATING

IN BIDDING THIS PROJECT SHALL BE RESPONSIBLE FOR INFORMATION CONTAINED

IN ANY AND ALL SHEETS OF DRAWINGS AND SPECIFICATIONS.

25 THE GENERAL CONTRACTOR IS TO PROVIDE BLOCKING AS REQUIRED FOR MOUNTING OF

WALL MOUNTED SHELVES, CABINETS, HC GRAB BARS AND PARTITION BRACES AND ALL

OTHER ITEMS IDENTIFIED ON THE EQUIPMENT OR ACCESSORY SCHEDULE. BLOCKING

SHALL BE FIRE TREATED WHERE REQUIRED BY THE BUILDING CODE.

26 THE GENERAL CONTRACTOR IS RESPONSIBLE FOR RECEIVING, UNLOADING, UNCRATING,

INSTALLATION AND HOOK-UP OF ALL OWNER FURNISHED ITEMS UNLESS NOTED

OTHERWISE ON THE DRAWINGS.

27 THE GENERAL CONTRACTOR IS TO ASSURE THAT NO REBAR OR REINFORCEMENT IS

PRESENT PRIOR TO CORE DRILLING OR PLACING BOLTS OR ANY OTHER ITEM WHICH

COULD DISTURB THE STRUCTURAL SLAB OR FOUNDATION WALLS.

28 PROVIDE GALVANIC PROTECTION BETWEEN DISSIMILAR MATERIALS WHERE REQUIRED.

29 PROVIDE METAL TRIM OR CASING AT ALL EDGES OF PLASTER AND DRYWALL SURFACES

WHERE IT TERMINATES OR MEETS ANY OTHER MATERIAL, UNLESS NOTED OTHERWISE.

30 PROVIDE METAL CORNER TRIM AT ALL OUTSIDE CORNERS OF PLASTER AND DRYWALL

SURFACES.

31 ALL PENETRATIONS THROUGH ANY SURFACE SHALL BE THOROUGHLY SEALED WITH

APPROPRIATE SEALANT MATERIAL.

32 UNLESS OTHERWISE NOTED, ALL EXTERIOR AND INTERIOR METAL, TRIM, TREILLAGE,

RAILINGS, MOLDINGS, FRAMES, CASTING ETC., SHALL BE PAINTED.

33 FOR PLUMBING, FIRE SPRINKLER AND ELECTRICAL SYSTEMS, PROVIDE APPROVED

ASSEMBLIES WITH SELF CLOSING DEVICES FOR ANY PENETRATIONS IN RATED

CONSTRUCTION.

34 THE GC SHALL VERIFY LOCATIONS OF ALL CEILING& WALL ACCESS PANELS WITH

MECHANICAL, FIRE SPRINKLER AND PLUMBING PLANS. ACCESS PANELS SHALL BE

FURNISHED AND INSTALLED WITH A FIRE RATING EQUAL TO THE WALL OR CEILING

ASSEMBLY INTO WHICH THEY ARE TO BE INSTALLED. FINISH AND LOCATION SHALL BE

APPROVED BY THE ARCHITECT.

35 THE GC SHALL VERIFY DIMENSIONS OF ALL EQUIPMENT PADS & BASES WITH

EQUIPMENT MANUFACTURERS & SHALL VERIFY ALL SIZES AND LOCATIONS OF DUCT

OPENINGS ON ROOF AND INTERIOR SHAFTS.

DRAWING INDEX:

GENERAL

G000 COVER SHEET

G001 INDEX AND GENERAL NOTES

G002 ABBREVIATIONS, DIMENSIONING LEGEND, SYMBOLS

G005 FIRE & LIFE SAFETY PLAN

G010 ADA REQUIREMENTS

G011 ADA REQUIREMENTS

ARCHITECTURAL

AD001 LEVEL 3 - DEMOLITION FLOOR PLAN

AD002 LEVEL 3 CEILING PLAN DEMO

A101 LEVEL 3 - CONSTRUCTION FLOOR PLAN

A121 LEVEL 3 - FINISH PLAN

A131 LEVEL 3 - CEILING PLAN

A502 DETAILS - ACOUSTICS

A600 DOOR SCHEDULE & LEGEND

A700 SIGN SCHEDULE, TYPES, DETAILS

MECHANICAL

MG001 MECHANICAL LEGEND AND GENERAL NOTES

ME101 LEVEL 3 MECHANICAL FLOOR PLANS

ME501 MECHANICAL DETAILS

ELECTRICAL

EE001 SYMBOLS LEGEND & INDEX

EE002 SPECIFICATIONS

EE003 SPECIFICATIONS

EE004 RISER DIAGRAM

EE100 ELECTRICAL DEMOLITION PLANS

EE101 ELECTRICAL FLOOR & CEILING PLANS

EE600 ELECTRICAL SCHEDULES

EE701 TYPICAL MOUNTING DETAILS

EE702 ELECTRICAL DETAILS

MARK DATE DESCRIPTION

1 7/20/26 Addendum#1

DNUP

DN

UP

SEE SHEET G001 FOR DRAWING INDEX.

SEE SHEET AG000 FOR GENERAL NOTES AND ABBREVIATIONS.

DO NOT SCALE DRAWINGS.

CONTRACTOR / SUBCONTRACTOR SHALL VERIFY ALL DIMENSIONS AND CONDITIONS BEFORE

BEGINNING WORK, AND SHALL REPORT TO THE ARCHITECT ANY ERRORS, INCONSISTENCIES OR

OMISSIONS BEFORE BEGINNING WORK. SEE GENERAL NOTES AND SPECIFICATIONS.

F

G

E

D

I

C

B

A

1 2 3 4

SHIPPPING &

RECIEVING

OPEN OFFICE

CONFERENCE/TRAINING

OFFICE

7 SF

EL. CLOSET

A410

P2

P2

P3 P1

P2

06 01

05 02

1'-7 1/2" 2'-3"

'-7

/2

9"

2'-3"

EQ EQ

05 02

08 01

09 01

24 01

10 01

08 02

08 02

08 02

12" WOOD JOIST FLOOR12" WOOD JOIST FLOOR

08 021

12" WOOD JOIST FLOOR

CONTRACT LIMIT LINE

4 7/8"

5/8" GYP. BD. TYPE-X

3 5/8" STEEL STUD @ 16" O.C.

5/8" GYP. BD. TYPE-X

3 5/8" SOUND ATTENTION BLANKET

P1

P2

P3

P1- SOUND WALL

HEIGHT: 6" ABOVE CEILING

P2-SOUND WALL

HEIGHT: FULL HEIGHT

P3-NO SOUND ATTENTION

HEIGHT: 6" ABOVE CEILING

3-5/8" METAL STUD PARTITION WALL P1 - P2 - P3

A L L I

D E

A S

D

E S

IG

N

S A

R R

A N

G E

M E

N T S

A N

D P

L A

N S

I N

D

IC

A T E

D O

R R

E P

R E

S E

N T E

D B

Y T

H

IS

D R

A W

IN

G

A R

E O

W N

E D

B Y

A N

D T

H E

P R

O P

E R

T Y

O F

A

JC

A R

C H

IT

E

C T S

P C

A N

D W

E R

E C

R E

A T E

D E

V O

L V

E D

A

N D

D E

V E

L O

P E

D F

O R

U S

E O

N A

N D

I N

C O

N N

E C

T

IO

N W

IT

H

T H

E S

P E

C

IF

IE

D

P R

O

JE

C T

N O

N E

O F

T H

E I D

E A

S

D E

S

IG

N S

A

R R

A N

G E

M E

N T S

O R

P L A

N S

S H

A L L B

E U

S E

D B

Y O

R D

IS

C

L O

S E

D T

O A

N Y

P E

R S

O N

F

IR

M

O

R C

O R

P O

R A

T

IO

N F

O R

A N

Y P

U R

P O

S E

W H

A T S

O E

V E

R W

IT

H

O U

T W

R

IT

T E

N C

O N

S E

N T O

F A

JC

A

R C

H

IT

E C

T S

P C

W

R

IT

T E

N D

IM

E

N S

IO

N

S O

N T

H E

S E

D R

A W

IN

G

S S

H A

V E

P R

E C

E D

E N

C E

O V

E R

S C

A L E

D

IM

E N

S

IO

N S

C

O N

T R

A C

T O

R S

S H

A L L V

E R

IF

Y

A N

D B

E R

E S

P O

N S

IB

L E

F O

R A

L L D

IM

E

N S

IO

N

S A

N D

C O

N D

IT

IO

N S

O N

T H

E J

O B

A N

D T

H

IS

O F

F

IC

E M

U S

T B

E N

O T

IF

IE

D

O F

A N

Y V

A R

IA

T

IO

N F

R O

M T

H E

D

IM

E N

S

IO

N S

A N

D C

O N

D

IT

IO

N

S S

H O

W N

B Y

T H

E

A W

IN

G

S W

A R

N

IN

G R

E P

R O

D U

C T

IO

N H

E R

E O

F I S

A C

R

IM

IN

A

L O

F F

E N

S E

U N

D E

R

U

.S .C

S

E C

U

N A

U T H

O R

IZ

E

D D

IS

C

L O

S U

R E

M A

Y C

O N

S T

IT

U T E

T R

A D

E S

E C

R E

T M

IS

A

P P

R O

P R

IA

T

IO

N I N

V

IO

L A

T

IO

N O

F I .C

.2

-2 -3

-1

E T

S E

Q

A N

D O

T H

E R

L A

W S

SHEET NUMBER:

ISSUE DATE:

ISSUE TYPE:

DRAWN BY:

CHECKED BY:

PROJECT#:

PROJECT DESCRIPTION

SHEET NAME:

REVISIONS

ARCHITECT / CONSULTANT

703 east 1700 south salt lake city, ut 84105 ajcarchitects.com

AHJ

A u to d e sk

D o cs

/2

-2

D

FC

M

-G O

E D

R e lo ca ti o n

T I/

G O

E D

R e lo ca ti o n

T I.r vt

/2

/2

:4

:5

P

M

7/8/2026

PERMIT SET

ajc

K. RIGBY

A101

2026-24

60 E SOUTH TEMPLE

SALT LAKE CITY, UT 84150

WORLD TRADE CENTER -

GOED TI

LEVEL 3 -

CONSTRUCTION FLOOR

PLAN

0'

SCALE : 1/8" = 1'-0"

8'4' 24'16'

KEYED NOTES:

05 02 ALIGN NEW WALL FINISH FLUSH WITH THE EXISTING COLUMN FINISH. PROVIDE

CONTINUOUS J-MOULDING AT THE TERMINATION EDGE. SEAL ALL JOINTS WITH

PAINTABLE SILICONE AS REQUIRED TO ACHIEVE A CLEAN, FINISHED APPEARANCE.

06 01 ADD 3/4" PLYWOOD BACKING FOR ELECTRICAL PANEL INSTALLATION AS REQ'D.

08 01 REUSE EXISTING DOOR, GLASS, FRAME AND HARDWARE.

08 02 APPLY COMMERCIAL WINDOW PRIVACY FILM TO THE BOTTOM AND MIDDLE

PORTIONS OF THE EXISTING GLAZING. INSTALL FILM ON THE EXTERIOR SIDE OF THE

ROOM. REMOVE EXISTING WINDOW FILM, IF PRESENT, PRIOR TO INSTALLATION OF

NEW PRIVACY FILM. REFER TO SHEET 15/A600 FOR ADDITIONAL INFORMATION.

09 01 DRYWALL CORNER BEADS ON ALL EDGES OF THE OPENING

10 01 SEMI-RECESSED FIRE EXTUINGUISHER CABINET

24 01 EXISTING DRINKING FOUNTAIN

GENERAL NOTES:

1/8" = 1'-0" ,1

LEVEL 3 - CONSTRUCTION FLOOR PLAN

n

MARK DATE DESCRIPTION

1 7/20/26 Addendum#1

WALL FINISH NOTES:

PATCH, REPAIR, AND FINISH EXISTING GYPSUM BOARD WALL SURFACES AFFECTED BY THE

REMOVAL OF EXISTING WALLS TO MATCH ADJACENT FINISHES. REFER TO DEMOLITION PLAN

1/AD001 FOR LOCATIONS.

UP

DNUP

DN

UP

DNUP

DN

UP

DNUP

DN

UP

SEE SHEET GI001 FOR DRAWING INDEX.

SEE SHEET GI002 FOR GENERAL NOTES AND ABBREVIATIONS.

DO NOT SCALE DRAWINGS.

CONTRACTOR / SUBCONTRACTOR SHALL VERIFY ALL DIMENSIONS AND CONDITIONS BEFORE

BEGINNING WORK, AND SHALL REPORT TO THE ARCHITECT ANY ERRORS, INCONSISTENCIES OR

OMISSIONS BEFORE BEGINNING WORK. SEE GENERAL NOTES AND SPECIFICATIONS.

FIELD VERIFY ALL DIMENSIONS BEFORE FABRICATION OF MILLWORK.

COORDINATE ALL MILLWORK WITH APPLIANCES BEFORE FABRICATION.

SEE INTERIOR ELEVATION SHEETS FOR ALL WALL TILE PATTERNS - COORDINATE PATTERN

LAYOUTS WITH ARCHITECT PRIOR TO CUTTING AND PLACEMENT OF ANY & ALL TILE.

PROVIDE A SMOOTH TRANSITION AT ALL CHANGES IN FLOOR MATERIAL - CONTRACTOR TO

INSTALL ALL FLOOR FINISHES AT SAME LEVEL, DESPITE DIFFERENCES IN THICKNESS.

ALL GYP. BD. CEILINGS SHALL BE PAINTED AS INDICATED IN FINISH LEGEND

ALL EXPOSED NON CONCRETE COLUMNS TO BE PAINTED TO MATCH ADJACENT WALLS.

EXPOSED METAL HANDRAILS, GUARDRAILS, HANDRAIL/GUARDRAIL SUPPORT SYSTEMS,

STAIR STRUCTURE, DUCTWORK, CONDUIT, PIPING, ETC NOT NOTED AS STAINLESS STEEL TO

BE PAINTED.

EXPOSED GYP. BD. CEILINGS SHALL BE PAINTED - REFER TO FINISH PLANS, REFLECTED

CEILING PLANS, & FINISH LEGEND FOR PAINT COLOR.

RATED WALL CONDITIONS SHALL REMAIN 5/8” TYPE-X GYP. BOARD. GYP. BOARD, BOTH RATED

AND NON-RATED, SHALL BE PAINTED WHERE EXPOSED - REFER TO FINISH LEGEND.

ALL SHOWER CEILINGS SHALL BE AT THE SAME ELEVATION AS THE ADJACENT CEILING, U.N.O.

PROVIDE SOLID BLOCKING/BACKING FOR ALL WALL MOUNTED ACCESSORIES.

FOR ALL FINISH MATERIALS SEE FINISH LEGEND ON SHEET SHEET AE620

FOR ACCESSORIES SEE SCHEDULE ON SHEET AE620. COORDINATE ALL FIXTURES WITH

MECHANICAL, PLUMBING, AND ELECTRICAL AS REQUIRED.

ALL EXSPOSED PIPES AT ADA FIXTURES SHOULD BE WRAPPED IN A PVC INSULATION.

WALL, FLOOR, BASE AND CEILING KEYNOTE: THIS SYMBOL, WHEN ATTACHED TO A WALL,

SHALL INDICATE THIS FINISH FOR THE ENTIRE LENGTH OF WALL FROM ONE INTERSECTION TO

THE NEXT AND NOT BE TERMINATED BY WINDOWS OR DOORS, U.N.O.

SEE SHEET AE620 FOR FINISH LEGEND.

FINISH NOTES

FINISH PLAN LEGEND

ROOM

ROOM #

FLOOR

BASE

WALLS

CEILINGS

DESIGNATED FINISH EXTENT

ROOM FINISH TAG - REFER TO FINISH LEGEND FOR MORE

INFORMATION

FINISH

CORNER GUARDS - REFER TO FINISH LEGEND AND FINISH DETAILS

FLOORING

CPT1 - CARPET TILE

MANUFACTURER: INTERFACE

SIZE: 10" X 40"

STYLE: 137880AK00 | STITCH IN TIME

COLOR: 105596 CHARCOAL STITCH

INSTALLATION METHOD: ASHLAR

WALL BASE

B1 4" RUBBER/VINYL BASE

MANUFACTURER: TARKETT

STYLE: COVE BASE

COLOR: 18 NAVY BLUE

SIZE: 4" TRADITIONAL (6" IN MAIN HALLWAYS)

WALLS

PT1 - GENERAL WALL, DOOR PANELS & DOOR FRAMES

MANUFACTURER: SHERWIN-WILLIAMS

COLOR: ALABASTER (SW 7008)

PT2 - OFFICE ACCENT WALLS

MANUFACTURER: SHERWIN-WILLIAMS

COLOR: REPOSE GREY (SW 7015)

PT3 - GREY-BLUE ACCENT WALLS

MANUFACTURER: SHERWIN-WILLIAMS

COLOR: STORM CLOUD (SW 6249)

PT4 - NAVY BLUE ACCENT WALLS

MANUFACTURER: SHERWIN-WILLIAMS

COLOR: ANCHORS AWEIGH (SW 9179)

FINISH NOTE:

REUSE EXISTING CARPET TILES WHEREVER POSSIBLE. CONTRACTOR SHALL PROVIDE NEW

MATERIALS ONLY AFTER EXISTING MATERIALS HAVE BEEN FULLY UTILIZED OR ARE NO LONGER

SUITABLE FOR REUSE.

F

G

E

D

I

C

B

A

1 2 3 4

SHIPPPING &

RECIEVING

CPT1

B1

PT1

C1/C2

OPEN OFFICE

CPT1

B1

PT1

C1

CONFERENCE/TRAINING

CPT1

B1

PT1

C2

OFFICE

CPT1

B1

PT1

C1

09 02

A L L I

D E

A S

D

E S

IG

N

S A

R R

A N

G E

M E

N T S

A N

D P

L A

N S

I N

D

IC

A T E

D O

R R

E P

R E

S E

N T E

D B

Y T

H

IS

D R

A W

IN

G

A R

E O

W N

E D

B Y

A N

D T

H E

P R

O P

E R

T Y

O F

A

JC

A R

C H

IT

E

C T S

P C

A N

D W

E R

E C

R E

A T E

D E

V O

L V

E D

A

N D

D E

V E

L O

P E

D F

O R

U S

E O

N A

N D

I N

C O

N N

E C

T

IO

N W

IT

H

T H

E S

P E

C

IF

IE

D

P R

O

JE

C T

N O

N E

O F

T H

E I D

E A

S

D E

S

IG

N S

A

R R

A N

G E

M E

N T S

O R

P L A

N S

S H

A L L B

E U

S E

D B

Y O

R D

IS

C

L O

S E

D T

O A

N Y

P E

R S

O N

F

IR

M

O

R C

O R

P O

R A

T

IO

N F

O R

A N

Y P

U R

P O

S E

W H

A T S

O E

V E

R W

IT

H

O U

T W

R

IT

T E

N C

O N

S E

N T O

F A

JC

A

R C

H

IT

E C

T S

P C

W

R

IT

T E

N D

IM

E

N S

IO

N

S O

N T

H E

S E

D R

A W

IN

G

S S

H A

V E

P R

E C

E D

E N

C E

O V

E R

S C

A L E

D

IM

E N

S

IO

N S

C

O N

T R

A C

T O

R S

S H

A L L V

E R

IF

Y

A N

D B

E R

E S

P O

N S

IB

L E

F O

R A

L L D

IM

E

N S

IO

N

S A

N D

C O

N D

IT

IO

N S

O N

T H

E J

O B

A N

D T

H

IS

O F

F

IC

E M

U S

T B

E N

O T

IF

IE

D

O F

A N

Y V

A R

IA

T

IO

N F

R O

M T

H E

D

IM

E N

S

IO

N S

A N

D C

O N

D

IT

IO

N

S S

H O

W N

B Y

T H

E

A W

IN

G

S W

A R

N

IN

G R

E P

R O

D U

C T

IO

N H

E R

E O

F I S

A C

R

IM

IN

A

L O

F F

E N

S E

U N

D E

R

U

.S .C

S

E C

U

N A

U T H

O R

IZ

E

D D

IS

C

L O

S U

R E

M A

Y C

O N

S T

IT

U T E

T R

A D

E S

E C

R E

T M

IS

A

P P

R O

P R

IA

T

IO

N I N

V

IO

L A

T

IO

N O

F I .C

.2

-2 -3

-1

E T

S E

Q

A N

D O

T H

E R

L A

W S

SHEET NUMBER:

ISSUE DATE:

ISSUE TYPE:

DRAWN BY:

CHECKED BY:

PROJECT#:

PROJECT DESCRIPTION

SHEET NAME:

REVISIONS

ARCHITECT / CONSULTANT

703 east 1700 south salt lake city, ut 84105 ajcarchitects.com

AHJ

A u to d e sk

D o cs

/2

-2

D

FC

M

-G O

E D

R e lo ca ti o n

T I/

G O

E D

R e lo ca ti o n

T I.r vt

/2

/2

:4

:5

P

M

7/8/2026

PERMIT SET

ajc

K. RIGBY

A121

2026-24

60 E SOUTH TEMPLE

SALT LAKE CITY, UT 84150

WORLD TRADE CENTER -

GOED TI

LEVEL 3 - FINISH PLAN

0'

SCALE : 1/8" = 1'-0"

8'4' 24'16'

1/8" = 1'-0" ,1

LEVEL 3 - FINISH PLAN

n

MARK DATE DESCRIPTION

1 7/20/26 Addendum#1

KEYED NOTES:

09 02 PAINT THESE WALLS ON HALWAY SIDE CORNER TO CORNER WITH PAINT PT1

F

G

E

D

I

C

B

A

1 2 3 4 5

'-0

'-0

'-1

'-1

'-0

'-6

'-6

33'-8" 4'-6" 39'-10" 4'-6"

OFFICE

OPEN OFFICE

SHIPPPING &

RECIEVING

CONFERENCE/TRAINING

C1

9'-0"

C1

9'-0"

C1

9'-0"

C1

9'-0"

LAY-IN CEILING FLUORESCENT FIXTURE. SEE

ELECTRICAL PLAN FOR SIZE AND TYPE.

LIGHTING DEVICES. SEE ELECTRICAL PLAN

FOR SIZE AND TYPE.

SUPPLY, RETURN & EXHAUST

DIFFUSERS/GRILLES. SEE MECHANICAL.

SUPPLY

DIFFUSER

LIFE SAFETY DEVICES. SEE ELECTRICAL

PLAN.

S

LIFE SAFETY DEVICES. SEE ELECTRICAL

PLAN.

FIRE

ALARM

EXIT SIGN

DATA DEVICES

ELECTRICAL PLAN FOR TYPE.

THIS IS A REFLECTED CEILING PLAN AND IS NOT TO BE INTENDED TO BE A LIGHTING PLAN. NO

WALL MOUNTED LIGHTING FIXTURES OR OTHER WALL MOUNTED APPURTENANCES ARE

SHOWN. SEE THE LIGHTING PLAN FOR ALL LIGHTING AND EGRESS SIGNS, SIZE AND TYPES OF

ELECTRICAL FIXTURES ETC. SEE MECHANICAL PLANS FOR ALL CEILING MOUNTED

DIFFUSERS/GRILLES ETC.

SYMBOL LEGEND

RETURN

GRILE

MOTION

SENSOR

DATA DEVICE

DC

DIMMING

CONTROL

C1 - NEW ACOUSTIC CEILING TILE - 24"x24"

C1

CEILING TYPES

SEE SHEET G001 FOR DRAWING INDEX.

SEE SHEET AG000 FOR GENERAL NOTES AND ABBREVIATIONS.

DO NOT SCALE DRAWINGS.

CONTRACTOR / SUBCONTRACTOR SHALL VERIFY ALL DIMENSIONS AND CONDITIONS BEFORE

BEGINNING WORK, AND SHALL REPORT TO THE ARCHITECT ANY ERRORS, INCONSISTENCIES OR

OMISSIONS BEFORE BEGINNING WORK. SEE GENERAL NOTES AND SPECIFICATIONS.

A L L I

D E

A S

D

E S

IG

N

S A

R R

A N

G E

M E

N T S

A N

D P

L A

N S

I N

D

IC

A T E

D O

R R

E P

R E

S E

N T E

D B

Y T

H

IS

D R

A W

IN

G

A R

E O

W N

E D

B Y

A N

D T

H E

P R

O P

E R

T Y

O F

A

JC

A R

C H

IT

E

C T S

P C

A N

D W

E R

E C

R E

A T E

D E

V O

L V

E D

A

N D

D E

V E

L O

P E

D F

O R

U S

E O

N A

N D

I N

C O

N N

E C

T

IO

N W

IT

H

T H

E S

P E

C

IF

IE

D

P R

O

JE

C T

N O

N E

O F

T H

E I D

E A

S

D E

S

IG

N S

A

R R

A N

G E

M E

N T S

O R

P L A

N S

S H

A L L B

E U

S E

D B

Y O

R D

IS

C

L O

S E

D T

O A

N Y

P E

R S

O N

F

IR

M

O

R C

O R

P O

R A

T

IO

N F

O R

A N

Y P

U R

P O

S E

W H

A T S

O E

V E

R W

IT

H

O U

T W

R

IT

T E

N C

O N

S E

N T O

F A

JC

A

R C

H

IT

E C

T S

P C

W

R

IT

T E

N D

IM

E

N S

IO

N

S O

N T

H E

S E

D R

A W

IN

G

S S

H A

V E

P R

E C

E D

E N

C E

O V

E R

S C

A L E

D

IM

E N

S

IO

N S

C

O N

T R

A C

T O

R S

S H

A L L V

E R

IF

Y

A N

D B

E R

E S

P O

N S

IB

L E

F O

R A

L L D

IM

E

N S

IO

N

S A

N D

C O

N D

IT

IO

N S

O N

T H

E J

O B

A N

D T

H

IS

O F

F

IC

E M

U S

T B

E N

O T

IF

IE

D

O F

A N

Y V

A R

IA

T

IO

N F

R O

M T

H E

D

IM

E N

S

IO

N S

A N

D C

O N

D

IT

IO

N

S S

H O

W N

B Y

T H

E

A W

IN

G

S W

A R

N

IN

G R

E P

R O

D U

C T

IO

N H

E R

E O

F I S

A C

R

IM

IN

A

L O

F F

E N

S E

U N

D E

R

U

.S .C

S

E C

U

N A

U T H

O R

IZ

E

D D

IS

C

L O

S U

R E

M A

Y C

O N

S T

IT

U T E

T R

A D

E S

E C

R E

T M

IS

A

P P

R O

P R

IA

T

IO

N I N

V

IO

L A

T

IO

N O

F I .C

.2

-2 -3

-1

E T

S E

Q

A N

D O

T H

E R

L A

W S

SHEET NUMBER:

ISSUE DATE:

ISSUE TYPE:

DRAWN BY:

CHECKED BY:

PROJECT#:

PROJECT DESCRIPTION

SHEET NAME:

REVISIONS

ARCHITECT / CONSULTANT

703 east 1700 south salt lake city, ut 84105 ajcarchitects.com

AHJ

A u to d e sk

D o cs

/2

-2

D

FC

M

-G O

E D

R e lo ca ti o n

T I/

G O

E D

R e lo ca ti o n

T I.r vt

/2

/2

:4

:5

P

M

7/8/2026

PERMIT SET

ajc

K. RIGBY

A131

2026-24

60 E SOUTH TEMPLE

SALT LAKE CITY, UT 84150

WORLD TRADE CENTER -

GOED TI

LEVEL 3 - CEILING

PLAN

1/8" = 1'-0" ,1

LEVEL 1 CEILING PLAN

KEYED NOTES:

0'

SCALE : 1/8" = 1'-0"

8'4' 24'16' n

GENERAL NOTES AND LEGENDS:

FINISH PLAN LEGEND:

CEILING

CL1 - LAY-IN CEILING (TO MATCH EXISTING)

POSSIBLE EXISTING:

MANUFACTURER: ARMSTRONG

SIZE: 24" X 24"

STYLE: CIRRUS, TEGULAR

INSTALLATION METHOD: STANDARD HEAVY DUTY CEILING GRID

MARK DATE DESCRIPTION

1 7/20/26 Addendum#1

CEILING FINISH NOTE:

REUSE EXISTING CEILING TILES & SUSPENDED CEILING GRID, WHEREVER POSSIBLE.

CONTRACTOR SHALL PROVIDE NEW MATERIALS ONLY AFTER EXISTING MATERIALS HAVE BEEN

FULLY UTILIZED OR ARE NO LONGER SUITABLE FOR REUSE.

HM-A

SALVAGED HM EGRESS

DOOR. REPAINT.

HM-B

S E E S

C H

E D

U

LE

2"

SCHEDULE

SEE 2"

'-0

8'-6"

EXISTING HOLLOW METAL

FRAME, WRAPS WALL/

REPAINT.

A600

A600

A600

A600

A600

A600

A600

SIM.

'-8

APPLY COMMERCIAL WINDOW

PRIVACY FILM IN BOTTOM AND

MIDDLE PORTION OF THE

GLAZING.

FILM SHOULD BE APPLIED

OUTSIDE OF THE ROOM. TYP.

WD

EXISTING SOLID WOOD

DOOR. PATCH AND

REPAIR. REPAINT.

FRAME ANCHOR

WALL TYPES

VARIES, SEE

SEE WALL TYPES

METAL STUD HEADER

PAINTABLE SEALANT, BOTH SIDES

HOLLOW METAL FRAME, PAINT

DOOR, SEE SCHEDULE

/8

1/2"

/8

GLASS AS SCHEDULED

HM GLAZING STOP

HM FRAME

LINE OF ASSEMBLY

BEYOND

RESILIENT GASKET. TYP.

DOOR AS SCHEDULED

GLASS AS SCHEDULED

HM GLAZING STOP

HM FRAME

LINE OF ASSEMBLY

BEYOND

RESILIENT GASKET. TYP.

GLASS AS SCHEDULED

2"

TYP.

4"

HOLLOW METAL FRAME, PAINT

JAMB ANCHOR

W A

LL

T Y P

E S

V A R

IE

S

, S E

E

(2) 18 GA. METAL STUDS PER JAMP,

TYP.

PAINTABLE SEALANT, BOTH SIDES

SEE WALL TYPES

DOOR, SEE SCHEDULE

ABUTTING WALL WHERE INDICATED

GLASS AS SCHEDULED

HM GLAZING STOP

HM FRAME

RESILIENT GASKET. TYP.

HM SUPPORT BRACKET

24" O.C. MAX.

ATTACH W/ MIN (2) 1/8"

PDF MAX. 24" O.C. MIN.

1-1/4" EMBED

LINE OF ASSEMBLY

BEYOND

A L L I

D E

A S

D

E S

IG

N

S A

R R

A N

G E

M E

N T S

A N

D P

L A

N S

I N

D

IC

A T E

D O

R R

E P

R E

S E

N T E

D B

Y T

H

IS

D R

A W

IN

G

A R

E O

W N

E D

B Y

A N

D T

H E

P R

O P

E R

T Y

O F

A

JC

A R

C H

IT

E

C T S

P C

A N

D W

E R

E C

R E

A T E

D E

V O

L V

E D

A

N D

D E

V E

L O

P E

D F

O R

U S

E O

N A

N D

I N

C O

N N

E C

T

IO

N W

IT

H

T H

E S

P E

C

IF

IE

D

P R

O

JE

C T

N O

N E

O F

T H

E I D

E A

S

D E

S

IG

N S

A

R R

A N

G E

M E

N T S

O R

P L A

N S

S H

A L L B

E U

S E

D B

Y O

R D

IS

C

L O

S E

D T

O A

N Y

P E

R S

O N

F

IR

M

O

R C

O R

P O

R A

T

IO

N F

O R

A N

Y P

U R

P O

S E

W H

A T S

O E

V E

R W

IT

H

O U

T W

R

IT

T E

N C

O N

S E

N T O

F A

JC

A

R C

H

IT

E C

T S

P C

W

R

IT

T E

N D

IM

E

N S

IO

N

S O

N T

H E

S E

D R

A W

IN

G

S S

H A

V E

P R

E C

E D

E N

C E

O V

E R

S C

A L E

D

IM

E N

S

IO

N S

C

O N

T R

A C

T O

R S

S H

A L L V

E R

IF

Y

A N

D B

E R

E S

P O

N S

IB

L E

F O

R A

L L D

IM

E

N S

IO

N

S A

N D

C O

N D

IT

IO

N S

O N

T H

E J

O B

A N

D T

H

IS

O F

F

IC

E M

U S

T B

E N

O T

IF

IE

D

O F

A N

Y V

A R

IA

T

IO

N F

R O

M T

H E

D

IM

E N

S

IO

N S

A N

D C

O N

D

IT

IO

N

S S

H O

W N

B Y

T H

E

A W

IN

G

S W

A R

N

IN

G R

E P

R O

D U

C T

IO

N H

E R

E O

F I S

A C

R

IM

IN

A

L O

F F

E N

S E

U N

D E

R

U

.S .C

S

E C

U

N A

U T H

O R

IZ

E

D D

IS

C

L O

S U

R E

M A

Y C

O N

S T

IT

U T E

T R

A D

E S

E C

R E

T M

IS

A

P P

R O

P R

IA

T

IO

N I N

V

IO

L A

T

IO

N O

F I .C

.2

-2 -3

-1

E T

S E

Q

A N

D O

T H

E R

L A

W S

SHEET NUMBER:

ISSUE DATE:

ISSUE TYPE:

DRAWN BY:

CHECKED BY:

PROJECT#:

PROJECT DESCRIPTION

SHEET NAME:

REVISIONS

ARCHITECT / CONSULTANT

703 east 1700 south salt lake city, ut 84105 ajcarchitects.com

AHJ

A u to d e sk

D o cs

/2

-2

D

FC

M

-G O

E D

R e lo ca ti o n

T I/

G O

E D

R e lo ca ti o n

T I.r vt

/2

/2

:4

:5

P

M

7/8/2026

PERMIT SET

ajc

K. RIGBY

A600

2026-24

60 E SOUTH TEMPLE

SALT LAKE CITY, UT 84150

WORLD TRADE CENTER -

GOED TI

DOOR SCHEDULE &

LEGEND

DOOR & FRAME SCHEDULE

DOOR

NO.

PANEL FRAME GENERAL INFO

COMMENTSW

ID

TH

H E

IG

H T

TY

P

E

FI

N

IS

H

TY

P

E

FI

N

IS

H

H A R

D W

A R

E S

E T

F

IR

E R

A

TI

N G

A C

O U

S

TI

C R

A

TI

N G

102 WD HM-B REUSE 0 SALVAGED HM GLAZED FRAME AND DOOR PANEL

104 3'-0" 7'-0" WD HM-A 0 EXISTING DOOR PROTECT DURING ALL PHASES OF CONSTRUCTION

105 WD HM-B 0 EXISTING DOOR PROTECT DURING ALL PHASES OF CONSTRUCTION

106 3'-0" 7'-0" WD HM-A LOCKING

REMOVE EXISTING PANIC HARDWARE. PATCH AND REPAINT DOOR PANEL.

PROVIDE NEW LOCKING SET.

1/4" = 1'-0" ,15

LEGEND - FRAME TYPES

1/4" = 1'-0" ,16

LEGEND - DOOR TYPES - WOOD PANELS

1. BASIS OF DESIGN INDICATED BELOW. SEE SPECIFICATIONS. SUBSTITUTIONS MUST BE APPROVED BY ARCHITECT.

2. NOTE: CONTRACTOR AND DOOR SUPPLIER TO COORDINATE DOOR UNDER-CUTS WITH MECHANICAL DRAWINGS FOR ADEQUATE VENTILATION.

3. DOOR HARDWARE SHALL MEET THE REQUIREMENTS OF IBC 1010.1.9.1. HARDWARE SHALL NOT REQUIRE PINCHING, TIGHT GRASPING, OR TWISTING

OF THE WRIST IN ORDER TO OPERATE.

4. FIELD VERIFY ALL DOOR OPENINGS AND CLEARANCES PRIOR TO DOOR FABRICATION AND INSTALLATION.

5. VERIFY ALL THROAT WIDTHS OF FRAMES WITH WALL TYPES AS INDICATED ON PLAN DRAWINGS.

6. REFER TO SPECIFICATION FOR DOOR HARDWARE SETS.

7. REFER TO FINISH SCHEDULE FOR DOOR AND FRAME FINISH DESCRIPTIONS

3" = 1'-0" , DWG REF: A60010

DOOR - HM HEAD @ GYP BD

3" = 1'-0" , DWG REF: A6009

DOOR - HM JAMB @ GYP BD

3" = 1'-0" , DWG REF: A6007

DOOR - HM HEAD @ TRANSOM GLASS

3" = 1'-0" , DWG REF: A6006

DOOR - HM JAMB @ GLASS

3" = 1'-0" , DWG REF: A6005

DOOR - HM SILL @ GLASS

3'-0" 7'-0" REFINISH

3'-0" 7'-0"

MARK DATE DESCRIPTION

1 7/20/26 Addendum#1

UP

SHIPPPING &

RECIEVING

OPEN OFFICE

CONFERENCE/TRAINING

OFFICE

EL. CLOSET

A R

R O

W D

IR

E

C T

IO

N

'-0

9"

SEE G011 FOR ADA

SIGNAGE REQUIREMENTS

NOTE:

1. PROVIDE FIRE EXTINGUISHER SIGN PER OSHA/IFC

REQUIREMENTS

2. ALL TEXT TO BE IN CENTURY GOTHIC

9"

/2

M

IN

STAINLESS STEEL PLATE W/

SQUARE EDGES,

MECHANICALLY FASTENED TO

THE WALL W/ CONCEALED

FASTENERS, COORDINATE TYPE

OF FASTENER WITH ARCHITECT

GRADE 2 BRAILLE,

BLACK FINISH

RAISED LETTERS , BLACK

FINISH

EXIT

TYPE - B

9"

OFFICE

1" RAISED LETTERS

AND GRADE 2

BRAILLE, BLACK

FINISH

TYPE - C

STAINLESS STEEL

PLATE W/ SQUARE

EDGES, MECHANICALLY

FASTENED TO THE

WALL W/ CONCEALED

FASTENERS,

COORDINATE TYPE OF

FASTENER WITH

ARCHITECT

1'-3"

/2

/2

STAINLESS STEEL PLATE W/

SQUARE EDGES,

MECHANICALLY FASTENED TO

THE WALL W/ CONCEALED

FASTENERS, COORDINATE TYPE

OF FASTENER WITH ARCHITECT

RAISED LETTERS , BLACK

FINISH

UTAH OFFICE OF

TOURISM AND UTAH

FILM COMMISSION

TYPE - A

DIRECTIONAL SIGN - ARROW TO POINT TOWARD GOED OFFICE SPACE EXIT SIGN - INSTALL NEXT TO EGRESS DOOR/OPENING

TYPICAL ROOM SIGN

GRADE 2 BRAILLE,

BLACK FINISH

UTAH OFFICE OF TOURISM

AND UTAH FILM COMMISSION LOGO

TYPE - D

AGENCY ENTRANCE WALL PLAQUE TO MATCH EXISTING TYPE - E SIGNAGE

NOTE:

LOGO AND LETTERING FONT/SIZE TO BE PROVIDED BY THE OWNER

TYPE - E

MODIFY EXISTING SIGNAGE

TO ADD GOED SIGNAGE.

COORDINATE WITH THE

OWNER FOR AGENCY TITLE

V E

R

IF

Y

M A

TC

H E

X

IS

TI

N

G T

Y P

E -E

S

IG

N A G

E

VERIFY - MATCH EXISTING TYPE-E SIGNAGE

A L L I

D E

A S

D

E S

IG

N

S A

R R

A N

G E

M E

N T S

A N

D P

L A

N S

I N

D

IC

A T E

D O

R R

E P

R E

S E

N T E

D B

Y T

H

IS

D R

A W

IN

G

A R

E O

W N

E D

B Y

A N

D T

H E

P R

O P

E R

T Y

O F

A

JC

A R

C H

IT

E

C T S

P C

A N

D W

E R

E C

R E

A T E

D E

V O

L V

E D

A

N D

D E

V E

L O

P E

D F

O R

U S

E O

N A

N D

I N

C O

N N

E C

T

IO

N W

IT

H

T H

E S

P E

C

IF

IE

D

P R

O

JE

C T

N O

N E

O F

T H

E I D

E A

S

D E

S

IG

N S

A

R R

A N

G E

M E

N T S

O R

P L A

N S

S H

A L L B

E U

S E

D B

Y O

R D

IS

C

L O

S E

D T

O A

N Y

P E

R S

O N

F

IR

M

O

R C

O R

P O

R A

T

IO

N F

O R

A N

Y P

U R

P O

S E

W H

A T S

O E

V E

R W

IT

H

O U

T W

R

IT

T E

N C

O N

S E

N T O

F A

JC

A

R C

H

IT

E C

T S

P C

W

R

IT

T E

N D

IM

E

N S

IO

N

S O

N T

H E

S E

D R

A W

IN

G

S S

H A

V E

P R

E C

E D

E N

C E

O V

E R

S C

A L E

D

IM

E N

S

IO

N S

C

O N

T R

A C

T O

R S

S H

A L L V

E R

IF

Y

A N

D B

E R

E S

P O

N S

IB

L E

F O

R A

L L D

IM

E

N S

IO

N

S A

N D

C O

N D

IT

IO

N S

O N

T H

E J

O B

A N

D T

H

IS

O F

F

IC

E M

U S

T B

E N

O T

IF

IE

D

O F

A N

Y V

A R

IA

T

IO

N F

R O

M T

H E

D

IM

E N

S

IO

N S

A N

D C

O N

D

IT

IO

N

S S

H O

W N

B Y

T H

E

A W

IN

G

S W

A R

N

IN

G R

E P

R O

D U

C T

IO

N H

E R

E O

F I S

A C

R

IM

IN

A

L O

F F

E N

S E

U N

D E

R

U

.S .C

S

E C

U

N A

U T H

O R

IZ

E

D D

IS

C

L O

S U

R E

M A

Y C

O N

S T

IT

U T E

T R

A D

E S

E C

R E

T M

IS

A

P P

R O

P R

IA

T

IO

N I N

V

IO

L A

T

IO

N O

F I .C

.2

-2 -3

-1

E T

S E

Q

A N

D O

T H

E R

L A

W S

SHEET NUMBER:

ISSUE DATE:

ISSUE TYPE:

DRAWN BY:

CHECKED BY:

PROJECT#:

PROJECT DESCRIPTION

SHEET NAME:

REVISIONS

ARCHITECT / CONSULTANT

703 east 1700 south salt lake city, ut 84105 ajcarchitects.com

AHJ

A u to d e sk

D o cs

/2

-2

D

FC

M

-G O

E D

R e lo ca ti o n

T I/

G O

E D

R e lo ca ti o n

T I.r vt

/2

/2

:4

:5

P

M

7/8/2026

PERMIT SET

ajc

K. RIGBY

A700

2026-24

60 E SOUTH TEMPLE

SALT LAKE CITY, UT 84150

WORLD TRADE CENTER -

GOED TI

SIGN SCHEDULE,

TYPES, DETAILS

1/16" = 1'-0" ,1

LEVEL 3 - SIGNAGE PLAN

1/2" = 1'-0" ,2

SIGNAGE ELEVATION MOUNTING TYP.

3" = 1'-0" ,3

SIGNAGE TYPES

A

B

B

C

C

C C

D

MARK DATE DESCRIPTION

1 7/20/26 Addendum#1

E

A

WHW ENGINEERING, LLC.

MECHANICAL

& PLUMBING

E N G I N E E R I N G

WHW ENGINEERING LLC

733 West 9000 South - Sandy, Utah - 84070

p. 801.466.4021

July 16, 2026

AJC ARCHITECTS

703 EAST 1700 SOUTH

SALT LAKE CITY, UT 84105

ATTN: Heber Slabbert RE: GOED - Addendum #1

Dear Heber, Please see below for modifications to the project listed above included in Addendum #1.

I. CHANGES/CLARIFICATIONS TO DRAWINGS:

a. See the attached updated ME101. Duct demo and new has changed. Thermostats shifted. No new equipment or GRD’s just duct changes.

We appreciate the opportunity to work with you on this project. If you need additional information or have any questions, please do not hesitate to contact our office. Thank you.

Sincerely, Brad Lash WHW Engineering

F

D

I

C

1 2 3

F

E

D

I

C

1 2 3

VAV

336E

VAV

640E

VAV

332E

10"ø SA

18"x12" SA

10"ø SA

EXIST

EXIST

EXIST

EXIST

EXIST

EXIST

100 EXIST

EXIST

EXIST

EXIST

VAV

323E

EXIST

EXIST

EXIST

EXIST

EXIST

VAV

333E

S

VAV-332E

S

VAV-333E

S

VAV-336E

EXIST

EXIST

EXIST

EXIST

EXIST

EXIST

S

VAV-640E

EXIST

SHIPPPING &

RECIEVING

OPEN OFFICE

OFFICE

CONFERENCE/TRAINING

EXIST

EXIST

EXIST

210 S

EXIST

EXIST

BRADLEY D.

LASH

No. 8681468

P R

O F

E

SS IONAL ENG

IN

E

E R

S T

A T E

O F U

T

A H

A L L I

D E

A S

D

E S

IG

N

S A

R R

A N

G E

M E

N T S

A N

D P

L A

N S

I N

D

IC

A T E

D O

R R

E P

R E

S E

N T E

D B

Y T

H

IS

D R

A W

IN

G

A R

E O

W N

E D

B Y

A N

D T

H E

P R

O P

E R

T Y

O F

A

JC

A R

C H

IT

E

C T S

P C

A N

D W

E R

E C

R E

A T E

D E

V O

L V

E D

A

N D

D E

V E

L O

P E

D F

O R

U S

E O

N A

N D

I N

C O

N N

E C

T

IO

N W

IT

H

T H

E S

P E

C

IF

IE

D

P R

O

JE

C T

N O

N E

O F

T H

E I D

E A

S

D E

S

IG

N S

A

R R

A N

G E

M E

N T S

O R

P L A

N S

S H

A L L B

E U

S E

D B

Y O

R D

IS

C

L O

S E

D T

O A

N Y

P E

R S

O N

F

IR

M

O

R C

O R

P O

R A

T

IO

N F

O R

A N

Y P

U R

P O

S E

W H

A T S

O E

V E

R W

IT

H

O U

T W

R

IT

T E

N C

O N

S E

N T O

F A

JC

A

R C

H

IT

E C

T S

P C

W

R

IT

T E

N D

IM

E

N S

IO

N

S O

N T

H E

S E

D R

A W

IN

G

S S

H A

V E

P R

E C

E D

E N

C E

O V

E R

S C

A L E

D

IM

E N

S

IO

N S

C

O N

T R

A C

T O

R S

S H

A L L V

E R

IF

Y

A N

D B

E R

E S

P O

N S

IB

L E

F O

R A

L L D

IM

E

N S

IO

N

S A

N D

C O

N D

IT

IO

N S

O N

T H

E J

O B

A N

D T

H

IS

O F

F

IC

E M

U S

T B

E N

O T

IF

IE

D

O F

A N

Y V

A R

IA

T

IO

N F

R O

M T

H E

D

IM

E N

S

IO

N S

A N

D C

O N

D

IT

IO

N

S S

H O

W N

B Y

T H

E

A W

IN

G

S W

A R

N

IN

G R

E P

R O

D U

C T

IO

N H

E R

E O

F I S

A C

R

IM

IN

A

L O

F F

E N

S E

U N

D E

R

U

.S .C

S

E C

U

N A

U T H

O R

IZ

E

D D

IS

C

L O

S U

R E

M A

Y C

O N

S T

IT

U T E

T R

A D

E S

E C

R E

T M

IS

A

P P

R O

P R

IA

T

IO

N I N

V

IO

L A

T

IO

N O

F I .C

.2

-2 -3

-1

E T S

E Q

A

N D

O T H

E R

L A

W S

SHEET NUMBER:

ISSUE DATE:

ISSUE TYPE:

DRAWN BY:

CHECKED BY:

PROJECT#:

PROJECT DESCRIPTION

SHEET NAME:

REVISIONS

ARCHITECT / CONSULTANT

703 east 1700 south salt lake city, ut 84105 ajcarchitects.com

07/08/26

A u to d e sk

D o cs

/2

-2

D

F C

M -G

O E

D R e lo ca ti o n

T I/

G

O E

D R e lo ca ti o n

T I v

M

P .r vt

/1

/2

:3

:0

P

M

07/09/2026

PERMIT SET

SG

BDL

ME101

26105

60 E SOUTH TEMPLE

SALT LAKE CITY, UT 84150

WORLD TRADE CENTER -

GOED TENANT

IMPROVEMENT

LEVEL 3 MECHANICAL

FLOOR PLANS

SHEET NOTES

1 RELOCATE THE EXISTING THERMOSTATS TO THIS

APPROXIMATE LOCATION AND MOUNT AT 48" AFF.

3/16" = 1'-0"

LEVEL 3 MECHANICAL DEMOLITION

FLOOR PLANS

3/16" = 1'-0"

LEVEL 3 LARGE SCALE MECHANICAL

FLOOR PLANS

GENERAL NOTES

1. THE INTENT IS TO REUSE THE EXISTING SUPPLY

DIFFUSERS AND RETURN GRILLES AND MODIFY DUCTWORK

AS NEEDED FOR THE NEW LAYOUT.

2. PROVIDE FULL TEST AND BALANCE ON THE AIR SIDE OF

EACH OF THE VAV SYSTEMS THAT ARE AFFECTED BY THE

MODIFICATIONS.

MARK DATE DESCRIPTION

1 07/21/26 ADD#1

1" = 40'-0"

KEYPLAN