WATER-COOLED LIQUID CHILLER TECHNICAL SPECIFICATIONS.pdf

This document is a technical specification and product data sheet for a two-stage water-cooled portable water chiller system with a capacity of 240,000 BTU/hr. The system features tandem hermetic scroll compressors using R410A refrigerant, stainless steel condenser and evaporator components, and an 80-gallon 304 stainless steel insulated tank with lid. The chiller measures 64"L x 42"W x 55.5"H and weighs approximately 1,100 lbs. Electrical configurations are available in three voltage options (575V-3-60, 230V-3-60, and 460V-3-60), with corresponding compressor RLA, LRA, pump FLA, MCA, and MOCP ratings. The system includes a 3.0 HP pump with 95 GPM capacity at 20 PSI and is designed for water-cooled portable applications with fluid connections of 2" MNPT inlet/outlet.

The chiller incorporates standard features including an electronic programmed temperature controller with constant setpoint and process temperature readout, efficient scroll compressors with sight glass and moisture indicators, balanced port expansion valves, stainless steel centrifugal pumps, bronze strainers, and comprehensive safety controls for high/low refrigerant pressure, high/low fluid temperature, freeze protection, and overload conditions. The system is available in ambient condition variants: IND (indoor use only), 40 (outdoor use at 40°F ambient), 0 (outdoor use to 0°F ambient), and M20 (outdoor use to -20°F ambient with hot gas bypass). Standard features include a one-year parts warranty and five-year compressor warranty. The documentation also includes performance curve data, installation drawings, pump/motor assembly details, electrical wiring diagrams, communications specifications for Delta PLC modules with RS232 protocol support, three-phase surge protection specifications, and remote control panel options with HMI capabilities via RS232 communications.