935CM3002_ONC_Gravesite Expansion_09 06 00 Schedule of Finishes.pdf

PDF 190 KB Posted

Attached to
Y1PZ--FY22: Omaha Gravesite Expansion Construction Project 935CM3002 Bid Documents shall be submitted by ELECTRONIC DELIVERY
Solicitation number
36C78622B0017
Issued by

About this file

This document contains a schedule of finishes for an Omaha National Cemetery gravesite expansion construction project. The project involves expanding grave sites at the Omaha National Cemetery located at 4250 Schram Road in Omaha, Nebraska. Project number 935CM3002. Construction will include cast in place concrete, masonry work utilizing various colored mortars and stone, sealants, signs, and site furnishings. Finishes are specified for concrete, masonry, stone veneer, sealants, signs and site furnishings. The related federal contract opportunity is solicitation number 36C78622B0017 for the Omaha gravesite expansion construction project with bid documents due by electronic delivery. The contracting agency is the Department of Veterans Affairs National Cemetery Administration.

View the file

Other files

File Type Posted
36C78622B0017 0003.docx DOCX document
36C78622B0017 0002.docx DOCX document
935CM3002_ONC_Gravesite Expansion_Sheet C505.pdf PDF
P07 WD ONC HIGHWAY Sary County NE20210028 2-25-22.pdf PDF
S02 ONC GSE Bid Questions and Answer.pdf PDF
P07 WD ONCHEAVY Sary County NE20220051 6-3-22.pdf PDF
Addendum 1 - Narrative.pdf PDF
02_Geotech Report 05215016R01 final.pdf PDF
P07 WD ONC BUILDING Sary County NE20220059.pdf PDF
ONC_Gravesite Expansion_Part-1 05_935CM3002_ BD Plan Set _2022-06-30.pdf PDF
ONC_Gravesite Expansion Part-4 05_935CM3002_ _BD Plan Set_2022-06-30.pdf PDF
ONC Gravesite Expansion_Part-2BD Plan Set 05_935CM3002_ONC__2022-06-30.pdf PDF
36C78622B0017 0001.docx DOCX document
ONC Compiled 04_935CM3002 BD Specs - 2022-06-30.pdf PDF
ONC_Gravesite Expansion Part-3 05_935CM3002__BD Plan Set_2022-06-30.pdf PDF
SOW - 935CM3002 Omaha GSE.docx DOCX document
05_935CM3002_ONC_Gravesite Expansion_BD Plan Set_2022-04-29Part-2.pdf PDF
04_935CM3002 BD Specs - Compiled - 2022-04-29.pdf PDF
S02 ONC IFB 36C78622B0017-6-29-2022 02.pdf PDF
S02 ONC IFB 36C78622B0017-6-29-2022.pdf PDF
05_935CM3002_ONC_Gravesite Expansion_BD Plan Set_2022-04-29Part-4.pdf PDF
05_935CM3002_ONC_Gravesite Expansion_BD Plan Set_2022-04-29Part-3.pdf PDF
S02_Attachment-_852.219-77_Limitations on Subcontracting-Contractor Certification.pdf PDF
S02_Attachment-_Contractor Price Estimate Worksheet.xlsx XLSX spreadsheet
Show all 24

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Omaha National Cemetery April 29, 2022 Gravesite Expansion Project No. 935CM3002

SCHEDULE FOR FINISHES

09 06 00 - 1

SECTION 09 06 00

SCHEDULE FOR FINISHES

PART I – GENERAL

1.1 DESCRIPTION

A. This section contains a coordinated system in which requirements for materials specified in other sections shown are identified by abbreviated material names and finish codes in the Room Finish Schedule or shown for other locations.

1.2 MANUFACTURERS

A. Manufacturer’s trade names and numbers used herein are only to identify colors, finishes, textures and patterns. Products of other manufacturer’s equivalent to colors, finishes, textures and patterns of manufacturers listed that meet requirements of technical specifications will be acceptable upon approval in writing by contracting officer for finish requirements.

1.3 SUBMITALS

A. Submit in accordance with SECTION 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES, provide quadruplicate samples for color approval of materials and finishes specified in this section.

B. Color Schedule: Submit full color schedule including manufacturers intending to be provided for project, with equivalent colors to selections provided by this section; format to match this section.

1.4 APPLICABLE PUBLICATIONS

A. Publications listed below form a part of this specification to extent referenced. Publications are referenced in text by the basic designation only. Comply with applicable provisions and recommendations of the following, except as otherwise shown or specified.

B. MASTER PAINTING INSTITUTE: (MPI)

Architectural Painting Specification Manual

PART 2 - PRODUCTS

2.1 COLOR BOARD

A. Size: As required to display building finishes.

B. Labeled for:

1. All finishes used.

09 06 00 - 2

2.2 DIVISION 03 – CONCRETE

A. SECTION 03 30 53, CAST IN PLACE CONCRETE (SHORT FORM)

Surface Finish Description

Exposed Concrete (Vertical) Grout Finish – Sack Rub

Exterior Slabs/Flatwork (Horizontal) Broom Finish

2.3 DIVISON 04 – MASONRY

A. SECTION 04 05 13, MASONRY MORTARING

Finish Code Finish Description

Mortar color for Stone Veneer Match mortar color at existing columbarium. Match color in approved mock-up.

B. SECTION 04 20 00, UNIT MASONRY

Type Size Pattern Finish Description

CMU Standard 6” 8” x 16” x 6” deep (nominal) Running Bond As scheduled.

C. SECTION 04 43 00, NATURAL STONE VENEER

Name of Stone Size Color, Texture, Finish, Grain Pattern Stone Source

Type 1 Stone As Detailed, See Drawings for Sizes

Color to match existing Columbarium, Honed, Cut Stone

Linear, As Detailed US Stone or approved equal

Type 2 Stone As Detailed, See Drawings for Sizes

Color to match existing columbarium, Split-Face, Cut Stone

Running Bond, As Detailed

US Stone or approved equal

2.4 DIVISION 07 – THERMAL AND MOISTURE PROTECTION

I. SECTION 07 92 00, JOINT SEALANTS

09 06 00 - 3

Location Color Manufacturer Manufacturer Color

Masonry Expansion Joints Limestone Sikaflex 2c Limestone

Precast Concrete Panels Gray Sikaflex 2c Gray

Masonry to Concrete Sealed Joints

Gray Sikaflex 2c Gray

Stone Caps Sealed Joints Limestone Sikaflex 2c Limestone

Concrete Pavement Gray Sikaflex 2c Gray

2.9 Division 10 - SPECIALTIES

A. SECTION 10 14 00, EXTERIOR SIGNS

Component Background Finish/ Material Manufacturer Mfg. Color Name/No.

Directional Sign – Panel Replacement Match Existing Contractor to provide shop drawings of fabrication

N/A

Cemetery Directory Sign – Panel Replacement

Match Existing Contractor to provide shop drawings of fabrication, AE to provide artwork for display.

N/A

Identification Sign - Post and Panel Match Existing Contractor to provide shop drawings of fabrication

N/A

“Do Not Drink” Sign (match existing flower watering stations)

2.14 Division 32 - EXTERIOR IMPROVEMENTS

C. SECTION 32 30 00, SITE FURNISHINGS

Item Style Name/No. Finish Manufacturer Mfg. Color Name/No.

8’ Benches without Back CityView

WP1-2100-DF

Duracoat Sitescapes, or approved equal.

Bronze

09 06 00 - 4

Item Style Name/No. Finish Manufacturer Mfg. Color Name/No.

6’ Bench with Back CityView

WP1-1000-DF

Duracoat Sitescapes or approved equal.

Bronze

Trash Receptacle CityView

CV2-2000-ON-DF

Duracoat Sitescapes or approved equal.

Bronze

Flower Vase Receptacle CityView

CV2-2004-ON-DF

Duracoat Sitescapes or approved equal.

Bronze

Flower Water Station Post Spigot Faucet Valve Rough Brass Haws 6252EHLF or approved equal

Brass

Flower Water Station Post Assembly

4” SQ Watering Station Powder Coat Sitescapes or approved equal

Bronze

- - - E N D - - -

File details come from the government source that posted it. Updated .