36C78621Q0162.pdf

RFQ FOR COMMERCIAL ITEMS

GENERAL INFORMATION

Document Type: Combined Synopsis Solicitation

Solicitation Number: 36C78621Q0162

Post Date: 04/22/2021

Response Date: 05/05/2021 at 4:00 pm EST

Applicable NAICS: 561730

Classification Code: S208

Set Aside Type: 100% Service-Disabled Veteran Owned Small Business (SDVOSB)

Period of Performance: 06/01/2021 through 5/31/2022, plus 4, one-year options, if exercised

Issuing Contracting Office: Department of Veterans Affairs National Cemetery Administration, Contract Services 18434 Joplin Rd Triangle, VA, 22172

Place of Performance: Louisiana National Cemetery 303 W. Mount Pleasant Rd.

Zachary, LA 70791

Attachments: A – Price Schedule

B – Scope of Work C – Wage Determination D – Past Performance Questionnaire

DESCRIPTION

This notice shall not be construed as a commitment by the Government to ultimately award a contract, nor does it restrict the Government to a particular acquisition approach. This is a solicitation issued as a request for quotation (RFQ) for commercial items prepared in accordance with the format in FAR Subpart 12.6, Acquisition of Commercial Items and FAR Part 13 Simplified Acquisition Procedures, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Responses to this RFQ are due to the Contracting Officer no later than 4:00 pm EST on 05/05/2021. The Government anticipates that responses to this announcement will result in a Firm Fixed Price, Requirements contract and the Government intends to make award under this announcement without discussion. All information submitted in response to this announcement is voluntary and the Government will not pay for information provided nor will it compensate any respondent for any cost incurred in developing information provided for the Government. Quoters are responsible for obtaining all amendments or additional information concerning this announcement at https://beta.sam.gov

This solicitation incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2021-05 Effective 03/10/2021.

This is a 100% set-aside for Service-Disabled Veteran Owned Small Business (SDVOSB) in accordance with VAAR 819.7005.

The applicable North American Industrial Classification System (NAICS) code for this procurement is 561730, with a business size standard of $8 million.

Scope: The contractor shall be responsible for providing sod delivery and installation services for the Louisiana National Cemetery during the period of June 1, 2021, through May 31, 2022, plus 4, one-year option periods, if exercised.

PRICE SCHEDULE

See Attachment A – Price Schedule

DESCRIPTION OF SERVICES REQUIRED

See Attachment B – Scope of Work

QUOTE FORMAT AND SUBMISSION INFORMATION:

Quotes shall be submitted via email to the following addresses:

Email: Kenneth.Dougherty@va.gov

Questions pertaining to this announcement shall be sent by email to: kenneth.dougherty@va.gov no later than three days prior to solicitation closing date. Telephone inquiries will not be accepted.

EVALUATION PROCESS:

The Government intends to award a firm fixed price, Requirements contract resulting from this solicitation to the responsible Quoter whose quote conforming to the solicitation that provides the best benefit to the Government, price and other factors considered. Quotes will be evaluated by performing a comparative evaluation of offers in accordance with FAR 13.106-2(b) to determine which response represents the “best” as a whole.

Quotes will be evaluated by performing a direct comparison of one quote with another in a uniform manner to determine which quote provides the government with its needs, as identified in the RFQ. The Government reserves the right to consider a response that offers more than the minimum and select that response if it provides a benefit to the Government. The Government has the discretion to accept other than the lowest priced quote that provides additional benefits.

QUOTE CONTENTS:

Quoters must be submitted on company letterhead. Commercial format is encouraged. All Quoters shall include the following information as part of their quote:

-Volume 1 -Pricing

Offer letter on Company letterhead which includes the following:

o Legal Business/Company Name (as listed in www.sam.gov) o DUNS Number o Point of Contact Name o Telephone number o Email Address o List any exceptions to the requirements

Schedule of Services (Attachment A – Price Schedule) with Quoted amounts

-Volume 2 – Technical Package for Evaluation One (1) Technical Proposal that addresses the three (3) Evaluation Factors and the Scope of

Work’s requirements. Volume 2 – Technical Package cannot exceed 15 pages.

o Technical/Management Capabilities

Key Personnel Performance Plan and Scheduling Product Information

Past Performance:

o The Quoter is responsible for providing at least two (2) completed past performance questionnaires (Attachment D – Past Performance Questionnaire)

VOLUME 1 – Pricing: The sum of all the contract line items (CLINs) will represent the total evaluated price. Quoted prices must be determined to be fair and reasonable in order to be eligible for award.

VOLUME 2 - Technical Package: The technical package shall include a detailed narrative that describes the Quoter’s approach to meeting the solicitation’s requirements by addressing each of the technical factors and sub-factors. Quote shall be evaluated in accordance with the criteria contained in this solicitation and on how well the Quoter’s approach meets or exceeds the Government’s requirements.

Failure to provide the required narrative will result in the Contract being considered nonresponsive.

Technical capability will be evaluated to determine the extent to which it demonstrates a clear understanding of all features involved in performance of the requirements identified in the PWS. The narrative should not simply restate the Governments requirements, but it should describe, in detail, how the Quoter intends to meet the requirements. The following technical factors need to be addressed in quotes submitted in response to this solicitation:

Factor 1: Technical and Managerial Capabilities

The detailed technical and managerial section shall specifically address all technical and management requirements set forth in this Request for Quotation (RFQ) including any exhibits or attachments.

Quoter shall submit experience and expertise for the sod delivery and installation services Provide relevant information that demonstrates the technical and managerial qualifications of key personnel proposed to perform under the contract. Key personnel are defined as those individuals who will directly manage, supervise, provide technical guidance, and oversee onsite contracted personnel. Qualifications of technical personnel and managers shall include relevant training, experience, and certifications (e.g. licensed pesticide applicator). Additional qualifications shall be provided in the form of a resume, not to exceed two pages in length, for each of the proposed individuals. Key personnel also include those that will serve as a liaison between the Contractor and the Government. Key personnel shall, at a minimum, include (1) English speaking, onsite supervisor. Identify each function the key personnel will provide during the performance of the contract.

Factor 2: Performance Plan and Scheduling

Describe the methodology to be implemented to accomplish the requirements of the Scope of Work (Attachment B) and detail how the proposed approach will effectively achieve performance objectives. A statement such as, “the Quoter will abide by solicitation/contract requirements” is not acceptable for determining technical acceptability.

Quoters shall provide a narrative specifying how allowances will be made for weather delays, holidays, burial services, days of the week, and hours of operations.

Factor 3: Product Information

Provide sod certification for the 419 Tiff Bermuda Grass to be delivered and installed.

Past Performance: Past performance shall be evaluated based on the Quoter’s completion and effectiveness on projects within the last (5) years that are comparable in size, complexity, and scope for this solicitation. Quoters shall complete and submit Attachment D – Past Performance Questionnaire, in Volume 2 – Technical Package. Quoters are to understand that the references provided may be contacted to obtain performance information for the contracts provided in Attachment D.

The Government may also use any relevant information in its possession or in the public domain, including information available in the Government’s databases, Duns & Bradstreet, Contractor Performance Assessment System (CPARS), and the Federal Awardee Performance and Integrity Information System (FAPIIS) to evaluate Quoters’ past performance.

SOLICITATION PROVISIONS AND CONTRACT CLAUSES

FAR 52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The Quoter is cautioned that the listed provisions may include blocks that must be completed by the Quoter and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the Quoter may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at these addresses:

https://www.acquisition.gov/browse/index/far https://www.va.gov/oal/library/vaar/

VAAR 852.252-70 Solicitation Provisions or Clauses Incorporated by Reference (Jan 2008)

The following provisions or clauses incorporated by reference in this solicitation must be completed by the Quoter or prospective contractor and submitted with the quotation or offer. Copies of these provisions or clauses are available on the Internet at the web sites provided in the provision at FAR 52.252-1, Solicitation Provisions Incorporated by Reference, or the clause at FAR 52.252-2, Clauses Incorporated by Reference. Copies may also be obtained from the contracting officer.

(End of provision)

The following solicitation provisions apply to this acquisition:

FAR 52.212-1 Instructions to Quoters – Commercial Items (Jun 2020) FAR 52.204-7 System for Award Management (Oct 2018) FAR 52.204-16 Commercial and Government Entity Code Reporting (Aug 2020)

FAR 52.212-3 Offeror Representations and Certifications – Commercial Items (Feb 2021) (Jul 2020) (DEVIATION) Quoters must complete annual representations and certifications on-line at http://orca.bpn.gov in accordance with FAR 52.212-3 “Offeror Representations and Certifications – Commercial Items (Feb 2021)” If paragraph (j) of the provision is applicable, a written submission is required.

FAR 52.252-2 Clauses Incorporated by Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at these addresses:

https://www.acquisition.gov/browse/index/far https://www.va.gov/oal/library/vaar/

The following solicitation clauses apply to this acquisition:

FAR 52.212-4, Contract Terms and Conditions – Commercial Items (Oct 2018)

Addendum to FAR clause 52.212-4, Contract Terms and Conditions – Commercial Items (Oct 2018):

FAR 52.204-13 System for Award Management Maintenance (Oct 2018) FAR 52.204-18 Commercial and Government Entity Code Maintenance (Aug 2020) FAR 52.216-18 Ordering (Aug 2020) (June 1, 2021 through May 31, 2026) FAR 52.216-19 Order Limitations (Oct 1995) ($250.00, 10,000, 10,000, 10, 5) FAR 52.216-21 Requirements (Oct 1995) (May 31, 2026) FAR 52.217-8 Option to Extend Services (Nov 1999) (15 days) FAR 52.217-9 Option to Extend the Term of the Contract (Mar 2000) (30 days | 30 days | 5 years) FAR 52.232-18 Availability of Funds (Apr 1984) FAR 52.232-19 Availability of Funds for the Next Fiscal Year (Apr 1984) (September 30, 2021) FAR 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (DEC 2013)

(DEVIATION AUG 2020)

VAAR 852.203-70 Commercial Advertising (May 2008) VAAR 852.219-10 VA Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (Nov

2020) (DEVIATION)

VAAR 852.219-74 Limitations on Subcontracting – Monitoring and Compliance (Jul 2018)

(DEVIATION)

VAAR 852.232-72 Electronic Submission of Payments Requests (Nov 2018)

VAAR 852.242-71 Administrative Contracting Officer (Oct 2020) VAAR 852.270-1 Representatives of Contracting Officers (Jan 2008)

The clause at 52.212-5 “Contract Terms and Conditions Required to Implement Statutes or Executive Orders” (Jan 2021) applies to this acquisition. The following subparagraphs of FAR 52.212-5 are applicable: (b)(4), (b)(8), (b)(22)(i), (b)(27), (b)(29), (b)(30)(i), (b)(31)(i), (b)(32)(i), (b)(33), (b)(35)(i), (b)(44), (b)(49)(i), (b)(51), (b)(58), (c)(1), (c)(2), (c)(7) and (c)(8).

(c)(2) 52.222-42 Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67)

Employee Class Monetary Wage – Fringe Benefits Laborer, grounds maintenance WG 3-1 $13.04 + $4.54 Laborer, grounds maintenance WG 3-5 $15.25 + $4.54

End of Addenda

End of Document

36C78621Q0162

ATTACHMENT A - PRICE/COST SCHEDULE

ITEM INFORMATION

ITEM

NUMBER

DESCRIPTION OF

SUPPLIES/SERVICES

ESTIMATED

QUANTITY UNIT UNIT PRICE AMOUNT

10,000.00 SF _____________ ____________

PROVIDE AND INSTALL 419 BERMUDA GRASS SOD ON

INTERMENT GRAVE SITES PER SCOPE OF WORK

Contract Period: Base POP Begin: 06-01-2021 POP End: 05-31-2022 PRINCIPAL NAICS CODE: 561730 - Landscaping Services PRODUCT/SERVICE CODE: S208 - Housekeeping - Landscaping/Groundskeeping

INTERMENT GRAVE SITES PER SCOPE OF WORK

Contract Period: Option 1 POP Begin: 06-01-2022 POP End: 05-31-2023 PRINCIPAL NAICS CODE: 561730 - Landscaping Services

INTERMENT GRAVE SITES PER SCOPE OF WORK

Contract Period: Option 2 POP Begin: 06-01-2023 POP End: 05-31-2024 PRINCIPAL NAICS CODE: 561730 - Landscaping Services

INTERMENT GRAVE SITES PER SCOPE OF WORK

Contract Period: Option 3 POP Begin: 06-01-2024 POP End: 05-31-2025 PRINCIPAL NAICS CODE: 561730 - Landscaping Services

INTERMENT GRAVE SITES PER SCOPE OF WORK

Contract Period: Option 4 POP Begin: 06-01-2025 POP End: 05-31-2026 PRINCIPAL NAICS CODE: 561730 - Landscaping Services

GRAND TOTAL __________________

ATTACHMENT B – SCOPE OF WORK

SCOPE OF WORK

The Contractor shall provide all necessary expertise, supervision, labor, equipment, and supplies to accomplish the delivery and placement of certified 419 Tiff Bermuda Grass for grave sites at the Louisiana National Cemetery property located at 303 West Mount Pleasant Road, Zachary, LA, 70791.

Work to be accomplished within the hours of 8:00 a.m. to 4:00 p.m. Monday through Friday.

No work will be allowed to be performed on weekends and official government Holidays, without advance written consent of the COR.

Pre-bid Site Visit:

Prior to submitting a quotation, offerors are encouraged to visit and inspect the site. Contact Sonny Peppers, Director or Chris Carpenter, Foreman at the Louisiana National Cemetery, 225- 654-1988 to schedule a site visit.

A. Delivery and plating of grass sod:

A.1 – Grass sod shall be ordered, delivered, and installed approximately once a month during growing season on all first and second interment sites at a rate of approximately 800 square feet per order as directed by the COR. The amount of grass sod to be delivered may vary depending on the interment rate. Sod will be installed in specific burial sections as instructed by the COR. This installation will usually occur in one full casket crypt burial section, in one full casket traditional section, and in one traditional cremation burial section per order. The grass sod shall be delivered and installed within three (3) business days of order.

A.1.1. For each placed order, the US Government estimates a minimum order of 600 square feet.

A.2 – Grass sod shall also be ordered and delivered in several intervals through the year. The second interment grave sites are scattered throughout the cemetery.

A.3 - Grass sod shall be certified 419 Bermuda and the contractor shall submit the following documents or information in accordance with the Table 1 to the COR. The cemetery turf is predominantly 419 Bermuda Grass. The sod will be delivered freshly cut, weed, disease, and insect free, and of healthy appearance with uniform color, leaf texture, and shoot density.

Grass sod shall be relatively free of thatch, less than 0.5 inch (uncompressed). Grass sod shall be machine cut at a uniform soil thickness of 0.6”, plus or minus 0.25”, at the time of cutting.

Measurement for thickness shall exclude top growth and any thatch. Irregular sized pads, broken pads, and torn or uneven ends will not be acceptable. Standard sized sections of grass sod shall be strong enough that it can be picked up and handled without damage. Grass sod shall not be harvested or transplanted when its moisture content (excessively dry or wet) may adversely affect its survival. Grass sod shall be harvested, delivered, and installed within a 24-hour period, unless a suitable preservation method is approved prior to delivery.

TABLE 1

Submittal Frequency Submittal Schedule

Sod provider and information sheet

Initial and as revised Prior to beginning work

Sod delivery tickets and certification

As needed Upon delivery

A.4 - Grass sod shall be installed per COR’s specific instructions at grave site locations specified in writing by COR.

A.5 - Grass sod shall be installed to match existing grade of turf (cemetery responsible for correct soil preparation and finish grade). All joints shall be butted tightly. Lateral joints shall be staggered to promote more uniform growth and strength. Care shall be exercised to ensure that sod pieces are not stretched or overlapped. Installed grass sod shall be properly rolled with sod roller to correct firmness.

A.6 - Once grass sod is installed, contractor shall notify COR for inspection and acceptance of work, prior to submitting invoice(s).

A.7 - Contractor is responsible for replacing any grass sod delivered and installed that does not meet the requirements stated in this scope of work within two (2) weeks after planting.

B. Contractor Equipment, Personnel, and Contractor Responsibilities

B.1 - Contractor shall not damage any property within the cemetery grounds. Any damage incurred by contractor shall be repaired or replaced at contractor expense with no additional charge to the government. This damage includes, but not is not limited to, rutting of grounds caused by contractor equipment, headstone and marker damage, and any other damage to cemetery property and grounds caused by contractor.

B.2 - Contractor shall not use any heavy equipment (e.g. back hoes, forklifts, dump trucks, etc.)

within burial sections. Contractor will be allowed to use light duty motorized utility carts for the transport of grass sod and tools, as needed, and at contractor expense.

B.3 - Contractor shall clean up and pick up any trash, debris, dirt, mud, tire marks or any other related items upon completion of work in that area.

B.4 - Contractor shall not store any materials, tools, or equipment overnight on the cemetery grounds.

B.5 – Contractor shall provide an English-speaking Foreman or Work Leader for this contract.

C. Cemetery Responsibilities

C.1 - The cemetery is responsible for grass sod damaged by cemetery personnel, third parties, storms, flood, frost, freeze, animals on cemetery grounds, or related.

C.2 - The cemetery is responsible for the required maintenance (including watering) of the grass sod once it is delivered, installed, and accepted.

End of Scope of Work

ATTACHMENT B – SCOPE OF WORK

SCOPE OF WORK

The Contractor shall provide all necessary expertise, supervision, labor, equipment, and supplies to accomplish the delivery and placement of certified 419 Tiff Bermuda Grass for grave sites at the Louisiana National Cemetery property located at 303 West Mount Pleasant Road, Zachary, LA, 70791.

Work to be accomplished within the hours of 8:00 a.m. to 4:00 p.m. Monday through Friday.

No work will be allowed to be performed on weekends and official government Holidays, without advance written consent of the COR.

Pre-bid Site Visit:

Prior to submitting a quotation, offerors are encouraged to visit and inspect the site. Contact Sonny Peppers, Director or Chris Carpenter, Foreman at the Louisiana National Cemetery, 225- 654-1988 to schedule a site visit.

A. Delivery and plating of grass sod:

A.1 – Grass sod shall be ordered, delivered, and installed approximately once a month during growing season on all first and second interment sites at a rate of approximately 800 square feet per order as directed by the COR. The amount of grass sod to be delivered may vary depending on the interment rate. Sod will be installed in specific burial sections as instructed by the COR. This installation will usually occur in one full casket crypt burial section, in one full casket traditional section, and in one traditional cremation burial section per order. The grass sod shall be delivered and installed within three (3) business days of order.

A.1.1. For each placed order, the US Government estimates a minimum order of 600 square feet.

A.2 – Grass sod shall also be ordered and delivered in several intervals through the year. The second interment grave sites are scattered throughout the cemetery.

A.3 - Grass sod shall be certified 419 Bermuda and the contractor shall submit the following documents or information in accordance with the Table 1 to the COR. The cemetery turf is predominantly 419 Bermuda Grass. The sod will be delivered freshly cut, weed, disease, and insect free, and of healthy appearance with uniform color, leaf texture, and shoot density.

Grass sod shall be relatively free of thatch, less than 0.5 inch (uncompressed). Grass sod shall be machine cut at a uniform soil thickness of 0.6”, plus or minus 0.25”, at the time of cutting.

Measurement for thickness shall exclude top growth and any thatch. Irregular sized pads, broken pads, and torn or uneven ends will not be acceptable. Standard sized sections of grass sod shall be strong enough that it can be picked up and handled without damage. Grass sod shall not be harvested or transplanted when its moisture content (excessively dry or wet) may adversely affect its survival. Grass sod shall be harvested, delivered, and installed within a 24-hour period, unless a suitable preservation method is approved prior to delivery.

TABLE 1

Submittal Frequency Submittal Schedule

Sod provider and information sheet

Initial and as revised Prior to beginning work

Sod delivery tickets and certification

As needed Upon delivery

A.4 - Grass sod shall be installed per COR’s specific instructions at grave site locations specified in writing by COR.

A.5 - Grass sod shall be installed to match existing grade of turf (cemetery responsible for correct soil preparation and finish grade). All joints shall be butted tightly. Lateral joints shall be staggered to promote more uniform growth and strength. Care shall be exercised to ensure that sod pieces are not stretched or overlapped. Installed grass sod shall be properly rolled with sod roller to correct firmness.

A.6 - Once grass sod is installed, contractor shall notify COR for inspection and acceptance of work, prior to submitting invoice(s).

A.7 - Contractor is responsible for replacing any grass sod delivered and installed that does not meet the requirements stated in this scope of work within two (2) weeks after planting.

B. Contractor Equipment, Personnel, and Contractor Responsibilities

B.1 - Contractor shall not damage any property within the cemetery grounds. Any damage incurred by contractor shall be repaired or replaced at contractor expense with no additional charge to the government. This damage includes, but not is not limited to, rutting of grounds caused by contractor equipment, headstone and marker damage, and any other damage to cemetery property and grounds caused by contractor.

B.2 - Contractor shall not use any heavy equipment (e.g. back hoes, forklifts, dump trucks, etc.)

within burial sections. Contractor will be allowed to use light duty motorized utility carts for the transport of grass sod and tools, as needed, and at contractor expense.

B.3 - Contractor shall clean up and pick up any trash, debris, dirt, mud, tire marks or any other related items upon completion of work in that area.

B.4 - Contractor shall not store any materials, tools, or equipment overnight on the cemetery grounds.

B.5 – Contractor shall provide an English-speaking Foreman or Work Leader for this contract.

C. Cemetery Responsibilities

C.1 - The cemetery is responsible for grass sod damaged by cemetery personnel, third parties, storms, flood, frost, freeze, animals on cemetery grounds, or related.

C.2 - The cemetery is responsible for the required maintenance (including watering) of the grass sod once it is delivered, installed, and accepted.

End of Scope of Work

ATTACHMENT C – WAGE DETERMINATION

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5177 Daniel W. Simms Division of | Revision No.: 12 Director Wage Determinations| Date Of Last Revision: 12/21/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.95 for calendar year 2021 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.95 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2021. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Louisiana

Area: Louisiana Parishes of Ascension East Baton Rouge East Feliciana Iberville Livingston Pointe Coupee St Helena West Baton Rouge West Feliciana

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.87 01012 - Accounting Clerk II 16.69 01013 - Accounting Clerk III 18.68 01020 - Administrative Assistant 19.73 01035 - Court Reporter 25.48 01041 - Customer Service Representative I 12.43 01042 - Customer Service Representative II 13.97 01043 - Customer Service Representative III 15.24 01051 - Data Entry Operator I 14.59 01052 - Data Entry Operator II 16.58 01060 - Dispatcher Motor Vehicle 17.83 01070 - Document Preparation Clerk 15.27 01090 - Duplicating Machine Operator 15.27 01111 - General Clerk I 12.16 01112 - General Clerk II 13.27 01113 - General Clerk III 14.89 01120 - Housing Referral Assistant 19.45 01141 - Messenger Courier 11.36 01191 - Order Clerk I 13.01 01192 - Order Clerk II 14.19 01261 - Personnel Assistant (Employment) I 15.99 01262 - Personnel Assistant (Employment) II 18.22 01263 - Personnel Assistant (Employment) III 19.94

01270 - Production Control Clerk 29.41 01290 - Rental Clerk 11.49 01300 - Scheduler Maintenance 15.59 01311 - Secretary I 15.59 01312 - Secretary II 17.45 01313 - Secretary III 19.45 01320 - Service Order Dispatcher 15.93 01410 - Supply Technician 19.84 01420 - Survey Worker 15.36 01460 - Switchboard Operator/Receptionist 12.80 01531 - Travel Clerk I 15.37 01532 - Travel Clerk II 16.41 01533 - Travel Clerk III 17.33 01611 - Word Processor I 13.89 01612 - Word Processor II 15.59 01613 - Word Processor III 17.45 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 22.50 05010 - Automotive Electrician 18.87 05040 - Automotive Glass Installer 17.54 05070 - Automotive Worker 17.54 05110 - Mobile Equipment Servicer 14.90 05130 - Motor Equipment Metal Mechanic 20.21 05160 - Motor Equipment Metal Worker 17.54 05190 - Motor Vehicle Mechanic 20.21 05220 - Motor Vehicle Mechanic Helper 14.50 05250 - Motor Vehicle Upholstery Worker 16.23 05280 - Motor Vehicle Wrecker 17.54 05310 - Painter Automotive 18.87 05340 - Radiator Repair Specialist 17.54 05370 - Tire Repairer 13.67 05400 - Transmission Repair Specialist 20.21 07000 - Food Preparation And Service Occupations 07010 - Baker 11.78 07041 - Cook I 10.14 07042 - Cook II 11.93 07070 - Dishwasher 9.48 07130 - Food Service Worker 9.06 07210 - Meat Cutter 14.73 07260 - Waiter/Waitress 8.86 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 20.56 09040 - Furniture Handler 12.27 09080 - Furniture Refinisher 20.56 09090 - Furniture Refinisher Helper 15.19 09110 - Furniture Repairer Minor 18.11 09130 - Upholsterer 20.56 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 10.82 11060 - Elevator Operator 10.82 11090 - Gardener 18.73 11122 - Housekeeping Aide 9.90 11150 - Janitor 9.90 11210 - Laborer Grounds Maintenance 13.90 11240 - Maid or Houseman 9.72 11260 - Pruner 12.23 11270 - Tractor Operator 17.25 11330 - Trail Maintenance Worker 13.90 11360 - Window Cleaner 11.25 12000 - Health Occupations 12010 - Ambulance Driver 20.80 12011 - Breath Alcohol Technician 20.80 12012 - Certified Occupational Therapist Assistant 28.59

12015 - Certified Physical Therapist Assistant 28.26 12020 - Dental Assistant 16.04 12025 - Dental Hygienist 33.95 12030 - EKG Technician 25.92 12035 - Electroneurodiagnostic Technologist 25.92 12040 - Emergency Medical Technician 20.80 12071 - Licensed Practical Nurse I 15.38 12072 - Licensed Practical Nurse II 17.21 12073 - Licensed Practical Nurse III 19.19 12100 - Medical Assistant 14.92 12130 - Medical Laboratory Technician 20.74 12160 - Medical Record Clerk 13.93 12190 - Medical Record Technician 15.59 12195 - Medical Transcriptionist 15.93 12210 - Nuclear Medicine Technologist 36.37 12221 - Nursing Assistant I 11.28 12222 - Nursing Assistant II 12.68 12223 - Nursing Assistant III 13.84 12224 - Nursing Assistant IV 15.53 12235 - Optical Dispenser 16.54 12236 - Optical Technician 15.27 12250 - Pharmacy Technician 16.33 12280 - Phlebotomist 15.18 12305 - Radiologic Technologist 24.14 12311 - Registered Nurse I 24.12 12312 - Registered Nurse II 29.51 12313 - Registered Nurse II Specialist 29.51 12314 - Registered Nurse III 35.70 12315 - Registered Nurse III Anesthetist 35.70 12316 - Registered Nurse IV 42.79 12317 - Scheduler (Drug and Alcohol Testing) 25.76 12320 - Substance Abuse Treatment Counselor 20.23 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.34 13012 - Exhibits Specialist II 22.72 13013 - Exhibits Specialist III 27.79 13041 - Illustrator I 19.29 13042 - Illustrator II 23.89 13043 - Illustrator III 29.22 13047 - Librarian 26.46 13050 - Library Aide/Clerk 13.26 13054 - Library Information Technology Systems 23.89 Administrator 13058 - Library Technician 17.67 13061 - Media Specialist I 17.24 13062 - Media Specialist II 19.29 13063 - Media Specialist III 21.51 13071 - Photographer I 14.06 13072 - Photographer II 17.69 13073 - Photographer III 18.31 13074 - Photographer IV 21.64 13075 - Photographer V 26.19 13090 - Technical Order Library Clerk 16.66 13110 - Video Teleconference Technician 19.43 14000 - Information Technology Occupations 14041 - Computer Operator I 15.74 14042 - Computer Operator II 17.62 14043 - Computer Operator III 19.64 14044 - Computer Operator IV 21.82 14045 - Computer Operator V 24.17 14071 - Computer Programmer I (see 1) 20.45 14072 - Computer Programmer II (see 1) 25.34 14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.74 14160 - Personal Computer Support Technician 21.82 14170 - System Support Specialist 24.69 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 28.26 15020 - Aircrew Training Devices Instructor (Rated) 34.19 15030 - Air Crew Training Devices Instructor (Pilot) 40.98 15050 - Computer Based Training Specialist / Instructor 28.26 15060 - Educational Technologist 24.91 15070 - Flight Instructor (Pilot) 40.98 15080 - Graphic Artist 22.28 15085 - Maintenance Test Pilot Fixed Jet/Prop 40.98 15086 - Maintenance Test Pilot Rotary Wing 40.98 15088 - Non-Maintenance Test/Co-Pilot 40.98 15090 - Technical Instructor 20.07 15095 - Technical Instructor/Course Developer 24.55 15110 - Test Proctor 16.90 15120 - Tutor 16.90 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.44 16030 - Counter Attendant 9.44 16040 - Dry Cleaner 11.80 16070 - Finisher Flatwork Machine 9.44 16090 - Presser Hand 9.44 16110 - Presser Machine Drycleaning 9.44 16130 - Presser Machine Shirts 9.44 16160 - Presser Machine Wearing Apparel Laundry 9.44 16190 - Sewing Machine Operator 12.60 16220 - Tailor 13.38 16250 - Washer Machine 10.22 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 24.27 19040 - Tool And Die Maker 31.08 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 18.25 21030 - Material Coordinator 29.41 21040 - Material Expediter 29.41 21050 - Material Handling Laborer 13.17 21071 - Order Filler 12.17 21080 - Production Line Worker (Food Processing) 18.25 21110 - Shipping Packer 16.36 21130 - Shipping/Receiving Clerk 16.36 21140 - Store Worker I 10.19 21150 - Stock Clerk 15.09 21210 - Tools And Parts Attendant 18.25 21410 - Warehouse Specialist 18.25 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 27.68 23019 - Aircraft Logs and Records Technician 20.87 23021 - Aircraft Mechanic I 25.99 23022 - Aircraft Mechanic II 27.68 23023 - Aircraft Mechanic III 29.38 23040 - Aircraft Mechanic Helper 17.44 23050 - Aircraft Painter 24.27 23060 - Aircraft Servicer 20.87 23070 - Aircraft Survival Flight Equipment Technician 24.27 23080 - Aircraft Worker 22.55 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 22.55 I

23092 - Aircrew Life Support Equipment (ALSE) Mechanic 25.99

II

23110 - Appliance Mechanic 20.65 23120 - Bicycle Repairer 19.17 23125 - Cable Splicer 27.62 23130 - Carpenter Maintenance 22.39 23140 - Carpet Layer 22.55 23160 - Electrician Maintenance 24.83 23181 - Electronics Technician Maintenance I 28.25 23182 - Electronics Technician Maintenance II 30.40 23183 - Electronics Technician Maintenance III 32.56 23260 - Fabric Worker 20.87 23290 - Fire Alarm System Mechanic 20.48 23310 - Fire Extinguisher Repairer 19.17 23311 - Fuel Distribution System Mechanic 25.93 23312 - Fuel Distribution System Operator 19.13 23370 - General Maintenance Worker 18.92 23380 - Ground Support Equipment Mechanic 25.99 23381 - Ground Support Equipment Servicer 20.87 23382 - Ground Support Equipment Worker 22.55 23391 - Gunsmith I 19.17 23392 - Gunsmith II 22.55 23393 - Gunsmith III 25.99 23410 - Heating Ventilation And Air-Conditioning 23.63 Mechanic 23411 - Heating Ventilation And Air Contidioning 25.17 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 26.47 23440 - Heavy Equipment Operator 23.32 23460 - Instrument Mechanic 28.70 23465 - Laboratory/Shelter Mechanic 24.27 23470 - Laborer 13.17 23510 - Locksmith 21.37 23530 - Machinery Maintenance Mechanic 31.31 23550 - Machinist Maintenance 26.24 23580 - Maintenance Trades Helper 14.73 23591 - Metrology Technician I 28.70 23592 - Metrology Technician II 30.57 23593 - Metrology Technician III 32.44 23640 - Millwright 28.06 23710 - Office Appliance Repairer 19.14 23760 - Painter Maintenance 20.51 23790 - Pipefitter Maintenance 28.40 23810 - Plumber Maintenance 26.51 23820 - Pneudraulic Systems Mechanic 25.99 23850 - Rigger 27.70 23870 - Scale Mechanic 22.55 23890 - Sheet-Metal Worker Maintenance 23.47 23910 - Small Engine Mechanic 22.55 23931 - Telecommunications Mechanic I 29.75 23932 - Telecommunications Mechanic II 31.69 23950 - Telephone Lineman 26.85 23960 - Welder Combination Maintenance 30.69 23965 - Well Driller 25.93 23970 - Woodcraft Worker 25.99 23980 - Woodworker 19.17 24000 - Personal Needs Occupations 24550 - Case Manager 15.30 24570 - Child Care Attendant 11.04 24580 - Child Care Center Clerk 14.51 24610 - Chore Aide 9.09 24620 - Family Readiness And Support Services 15.30 Coordinator

24630 - Homemaker 17.40 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 25.99 25040 - Sewage Plant Operator 18.93 25070 - Stationary Engineer 25.99 25190 - Ventilation Equipment Tender 17.44 25210 - Water Treatment Plant Operator 18.93 27000 - Protective Service Occupations 27004 - Alarm Monitor 16.41 27007 - Baggage Inspector 13.25 27008 - Corrections Officer 16.80 27010 - Court Security Officer 15.40 27030 - Detection Dog Handler 14.83 27040 - Detention Officer 16.80 27070 - Firefighter 15.17 27101 - Guard I 13.25 27102 - Guard II 14.83 27131 - Police Officer I 19.15 27132 - Police Officer II 21.28 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.35 28042 - Carnival Equipment Repairer 14.55 28043 - Carnival Worker 9.88 28210 - Gate Attendant/Gate Tender 12.73 28310 - Lifeguard 11.34 28350 - Park Attendant (Aide) 14.24 28510 - Recreation Aide/Health Facility Attendant 10.39 28515 - Recreation Specialist 16.72 28630 - Sports Official 11.34 28690 - Swimming Pool Operator 18.01 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 23.88 29020 - Hatch Tender 23.88 29030 - Line Handler 23.88 29041 - Stevedore I 22.09 29042 - Stevedore II 25.69 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 39.89 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.50 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.29 30021 - Archeological Technician I 18.28 30022 - Archeological Technician II 20.45 30023 - Archeological Technician III 25.36 30030 - Cartographic Technician 25.36 30040 - Civil Engineering Technician 27.70 30051 - Cryogenic Technician I 29.18 30052 - Cryogenic Technician II 32.24 30061 - Drafter/CAD Operator I 18.28 30062 - Drafter/CAD Operator II 20.45 30063 - Drafter/CAD Operator III 22.81 30064 - Drafter/CAD Operator IV 28.06 30081 - Engineering Technician I 15.69 30082 - Engineering Technician II 17.62 30083 - Engineering Technician III 19.72 30084 - Engineering Technician IV 24.42 30085 - Engineering Technician V 29.87 30086 - Engineering Technician VI 36.14 30090 - Environmental Technician 25.66 30095 - Evidence Control Specialist 26.35 30210 - Laboratory Technician 36.51 30221 - Latent Fingerprint Technician I 25.16 30222 - Latent Fingerprint Technician II 27.79 30240 - Mathematical Technician 27.90

30361 - Paralegal/Legal Assistant I 19.23 30362 - Paralegal/Legal Assistant II 23.51 30363 - Paralegal/Legal Assistant III 28.78 30364 - Paralegal/Legal Assistant IV 34.80 30375 - Petroleum Supply Specialist 32.24 30390 - Photo-Optics Technician 25.36 30395 - Radiation Control Technician 32.24 30461 - Technical Writer I 21.89 30462 - Technical Writer II 26.77 30463 - Technical Writer III 32.39 30491 - Unexploded Ordnance (UXO) Technician I 25.35 30492 - Unexploded Ordnance (UXO) Technician II 30.67 30493 - Unexploded Ordnance (UXO) Technician III 36.76 30494 - Unexploded (UXO) Safety Escort 25.35 30495 - Unexploded (UXO) Sweep Personnel 25.35 30501 - Weather Forecaster I 29.18 30502 - Weather Forecaster II 35.50 30620 - Weather Observer Combined Upper Air Or (see 2) 22.81 Surface Programs 30621 - Weather Observer Senior (see 2) 25.36 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.67 31020 - Bus Aide 13.05 31030 - Bus Driver 19.36 31043 - Driver Courier 13.62 31260 - Parking and Lot Attendant 11.94 31290 - Shuttle Bus Driver 14.97 31310 - Taxi Driver 11.99 31361 - Truckdriver Light 14.97 31362 - Truckdriver Medium 16.30 31363 - Truckdriver Heavy 20.92 31364 - Truckdriver Tractor-Trailer 20.92 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.95 99030 - Cashier 9.35 99050 - Desk Clerk 10.58 99095 - Embalmer 27.63 99130 - Flight Follower 25.35 99251 - Laboratory Animal Caretaker I 11.46 99252 - Laboratory Animal Caretaker II 12.59 99260 - Marketing Analyst 27.23 99310 - Mortician 27.63 99410 - Pest Controller 14.60 99510 - Photofinishing Worker 13.32 99710 - Recycling Laborer 17.94 99711 - Recycling Specialist 22.16 99730 - Refuse Collector 15.78 99810 - Sales Clerk 10.67 99820 - School Crossing Guard 15.67 99830 - Survey Party Chief 25.13 99831 - Surveying Aide 15.76 99832 - Surveying Technician 21.57 99840 - Vending Machine Attendant 15.01 99841 - Vending Machine Repairer 19.41 99842 - Vending Machine Repairer Helper 15.01

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or $786.93 per month

HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 5 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard Form 1444 (SF-1444)…