VA OKC 8East Furniture - SOW 01.10.2024.docx

Department of Veterans Affairs Oklahoma City VA Health Care System 921 NE 13th Street, Oklahoma City, OK 73104

STATEMENT OF WORK

1.0 GENERAL SCOPE

The Veterans Health Administration (VHA) has a requirement for healthcare furniture for Behavior Health Weighted Furniture for Oklahoma City VA Health Care 8 East Locked In-patient Unit that meets the VHA SOW specifications and high-quality threshold while integrating excellent environmental stewardship.

This requirement includes healthcare furniture, project management, and warranty services. Service required is detailed in SV1 Healthcare Furniture technical requirements per VHA Healthcare Furniture SOW.

Healthcare furnishings include heavily weighted tables, chairs, stools and wall mounted shelf for personal items.

The contractor shall provide all labor, materials, equipment, transportation, and supervision necessary to satisfy the needs of each ordering activity.

2.0 PERFORMANCE REQUIREMENTS

The contractor shall provide and be responsible for the technical assistance, development, and generation for final specifications.

Furniture delivery VA HCS OKC at 921 NE 13th Street, Oklahoma City, OK 73104.

Duty hours will be 7:00 am - 3:00 pm. The Government recognized US holidays are: New Year’s Day, Martin Luther King, Jr. Day, Presidents Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day, and Christmas Day. If the holiday falls on Sunday, it is observed on Monday.

The contractor shall take the following site conditions into account for delivery:

a. The site will accommodate a 53’ trailer for furniture delivery.

b. The Contractor and Shipping/Delivery company shall provide tracking number and time window for delivery two weeks before delivery to VA Contracting Officer Representative (COR) or VA personnel.

In addition, The contractor shall:

a. Coordinate and provide project management of all products and services to manage, design, order, ship, deliver and install new furniture from the manufacturer until final acceptance TBD

b. Only include products specified within the SOW Brand name or Equal.

c. Provide maintenance manuals and/or SPEC Sheet for all products specified.

3.0 KICKOFF MEETING

This is drop ship and no kick off meeting is required.

4.0 SUBMISSION OF QUESTIONS

Questions: All questions must be received IAW Solicitations. Questions received after the stated date and time, may be addressed at the discretion of the Contracting Officer.

5.0 SUBMISSION OF QUOTATION

Quote Submission: The contractors shall submit complete emailed electronic copy portable document format (.pdf) or Microsoft Excel (.xls) format of:

Volume 1: (technical)

a. complete manufacturer’s product specifications

b. product literature

c. physical finish samples, in some cases digital samples are acceptable.

d. sustainability certification documents

e. complete testing results / certificates

f. warranty.

g. Self-certifying statement confirming ability to meet project deadlines Volume 2: (pricing)

a. Drop Ship

b. Bill of Materials with subtotals and tagged per CLIN Submissions can be sent in multiple emails to avoid computer system email size limitation, as listed in solicitation. Quotes submitted by any other method will not be considered. All proprietary information shall be clearly marked. The use of hyperlinks in quotes is prohibited. Late quotes will not be accepted for evaluation. The contractor is responsible for confirming the Government’s receipt of the contractor’s quote.

6.0 EVALUATION CRITERIA

Task order will be evaluated on:

a. Bill of Materials with subtotals and tagged per CLIN department and room etc.

b. PDFs of detailed and dimensioned: Plan, 2-D and 3-D drawings of each workstation (and/or) products with multiple parts list to represent exactly what is being included in task order and to determine accuracy.

c. Cut sheets with product detail for each line item.

d. Sustainability Certification

7.0 PRODUCT

General

All finished surfaces shall be free of scratches, mars, dents, or blemishes, and withstand staining, and exhibit to flaking, cracking, or loss or adhesion.

Furnishings shall have smooth finishes with no hazardous projections, sharp corners, or detail, which can be hazardous and cause personal injury or damage to clothing.

If the furniture does not already meet weight requirements and will need to be factory filled with sand, furniture that can not be factory filled will need to be dropshipped and facility staff will fill sand at location.

See attachment for technical requirement of products.

Requirements of Space

The furniture must be approved for Behavior Health In-Patient Facility use.

Oklahoma City VA Behavioral Health In-patient Locked Unit

a. Anti-microbial finish applied to all exposed wood surfaces

b. Surfaces must be hard, and durable to be heat, scratch, and mar resistant, and cleanable with healthcare cleaners. 25 MM plywood core table top

c. Heavily weighted for increased stability and deter misuse.

d. Meets or exceeds Fammability standards UL94 HB

e. Compliant with Healthier Hospital's guidelines

f. Performance Test Standards: Product tested to 1,000 lb static load.

g. 10 year limited replacement warranty.

h. Drop Shipping

i. Made in the USA

a. One-piece, rotationally-molded,Tamper Resistant, maintenance free surface which allows for easy cleaning.

b. Dimensions; Height 29.2" Diameter 36“ Weight 31lbs- Factory Ballasting (150 lbs) or ability to be ballasted

c. Finish: Molded Dove from Norix or similar

a. One-piece, rotationally-molded,Tamper Resistant, maintenance free surface which allows for easy cleaning.

b. Dimensions; Height 30" Diameter 42" Weight 89lbs- Factory Ballasting (150 lbs) or ability to be ballasted

c. Finish: Laminet top - Game Top Molded Base- Raven or black

Category: Seating

GENERAL REQUIREMENTS FOR ALL SEATING

a. Contributes to LEED points

b. Entire frame and seat structure should be bleach solution and healthcare grade germicide cleanable

d. Meets or exceeds ANSI/BIFMA standards

e. Compliant with TB 117-2013 or most current standard

f. UL1056 Fire Test of Upholstered Furniture. ASTM E1537 Test Method for Fire Testing of Real Scale Upholstered Furniture Items. NFPA 261 Cigarette Ignition Resistance of Upholstered Furniture. UL94 HB Test for Flammability of Plastic Materials.

g. Compliant with Healthier Hospitals guidelines

h. Performance Test Standards: Product tested to 750 lb static loads

i. Drop shipping

j. 10 year limited replacement warranty

k. Made in the USA

Salient Characteristics: To include minimum of the following specifications:

a. Patient chairs shall have antimicrobial, water resistant, healthcare grade material

b. Chair shall have a weight of a minimum of 124+ lbs ballasted or ability to be ballasted

c. One-piece rotationally-molded polyethylene with lightly textured maintenance free surface allows for easy cleaning.

d. Anti-ligature design with no internal openings. Tamper-resistant steel-encased nylon glides for floor protection.

e. Molded base to floor

f. Heavily weighted to increase stability and deter misuse

Additional Characteristics: To include minimum of the following specifications:

h. Bariatric chair. Refer to the Patient Bariatric Chair for additional information

i. Standard chair- dimensions; 33"H x 27"W x 36"D

j. Finish Twilight or BRAND NAME OR EQUAL

k. Norix Vesta Guest Chair Armless BRAND NAME OR EQUAL

Salient Characteristics: To include minimum of the following specifications:

a. Patient chairs shall have antimicrobial, water resistant, healthcare grade material

c. One-piece rotationally-molded polyethylene with lightly textured maintenance free surface allows for easy cleaning.

d. Anti-ligature design with no internal openings. Tamper-resistant steel-encased nylon glides for floor protection.

e. Molded base to floor

f. Heavily weighted to increase stability and deter misuse

g. Heavily weighted 142LBS

Prefered Characteristics: To include minimum of the following specifications:

h. Bariatric chair. Refer to the Patient Bariatric Chair for additional information

i. Standard chair- dimensions; 33"H x 27"W x 36"D

j. Frame: The Harmony® Series is built around a robust fully welded steel frame for maximum strength and durability.

Cushions: Polyurethane foam is glued to high strength plywood and connected to a tamper proof metal seat pan which is welded directly to the frame. 2.7 pound high density polyurethane foam in both the seat and back provides longevity and support in high traffic applications.

Arm Panels: Steel arms are fully welded for maximum stability and durability. Fully welded seat pan is through bolted to securely fasten to steel arms. Full length, one piece, pick resistant, securely fixed polyurethane arm caps protect high use top and front edges of the chair. The self-skinned polyurethane arm cap is molded over an 11 gauge steel armature and attaches with a secure steel-to-steel connection to ensure the arm cap stays connected to the frame. Injection molded nylon feet are engineered for strength and to protect floors.

j. Finish: Back- Fuse 2.0 Slate Seat & Arms- Clean Slate 2.0 Navy

k. Norix Harmony Bariatric Arm Chair BRAND NAME OR EQUAL

a. Anti-microbial finish - NO Wood product

b. Rotationally molded, specially formulated, anti-ligature, high-impact polyethylene.

c. Wall mounted only

d. Meets or exceeds Fammability standards UL1056, ASTM E1537 , & NFPA 261.

e. Compliant with Healthier Hospital's guidelines

f. Anti-ligature design with non internal openings.

g. 10 year limited replacement warranty.

h. Drop Shipping

i. Wall mounted design

j. Aprox. dimensions; 3 shelf- 53.3"H x 27"W x 13.8"D

k. Norix Attenda 3 Shelf Storage Unit or BRAND NAME OR EQUAL

8.0 SERVICES

Service required is detailed in SV1

Design Contract Tasks/Requirements

a. The contractor shall contact VA Interior Designer to review final award with VA Interior Designer and End Users and to make necessary revisions.

b. The contractor shall allow for three (3) revisions per line item included in design services including updating Auto-Cad Drawings and PDFs as request by VA Interior Designer.

c. The contractor shall be responsible for providing all sample materials for awarded product (2-Day Delivery) as requested by VA Interior Designer.

d. The product must not be placed into production without clearance from the VA COR.

e. The contractor shall provide final, clean drawings of product layout for sign-off prior to scheduling manufacturing.

f. The contractor shall track manufacturing schedule and notify VA Interior Designer with updates of estimated completion date by email.

g. The contractor shall attend a post-delivery meeting to assess, address, and document any punch-list items and shall submit to the VA Interior Designer a remediation plan within 5 business days.

The Government maintains the option to modify the normal work week, days and hours, as necessary for the accomplishment of VHA mission.

Work Required by Others

All work required by other trades shall be identified under this section by the Bidder.