36C25627Q0004_1.docx
DOCX document 110 KB Posted
- Attached to
- 6515--Surgical Instrument Repair Service
- Solicitation number
- 36C25627Q0004
About this file
Summary
This is a Solicitation/Contract/Order for Commercial Products and Commercial Services (SF 1449) issued by the Department of Veterans Affairs' Gulf Coast Veterans Healthcare System Network Contracting Office 16 for surgical instrument repair and maintenance services. The solicitation number is 36C25627Q0004, with an offer due date of August 21, 2026 at 12:00 PM CDT, and a contract effective date of October 1, 2026. The requirement is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSBs) and carries a $34 million ceiling value. The contract will be firm-fixed-price with a base period from October 1, 2026 to September 30, 2027, followed by four one-year option periods through September 30, 2031.
The contractor must provide monthly on-site preventive maintenance, repair, refurbishment, and assessment services for surgical instruments, rigid sterilization containers, and case carts at the Gulf Coast Veterans Healthcare System in Biloxi, MS (12 visits annually) and the Joint Ambulatory Care Center in Pensacola, FL (4 visits annually). Services include instrument sharpening, repair, testing, magnification-assisted diagnostics, and documentation of all repairs with cost breakdowns. The contractor must perform repairs in compliance with ANSI-AAMI ST-79:2010 Part 7.7 standards, provide same-day, 24-hour, and 48-hour turnaround options, maintain a mobile repair vehicle with appropriate safety equipment, and handle 10+ instrument sets per visit. Applicable prevailing wage rates are Harrison County, MS (15-5147 Rev 30) and Escambia County, FL (15-4561 Rev 32). Contractors must submit quotes including completed SF 1449, technical capabilities demonstrating prior surgical instrument repair experience, pricing for the schedule items, three to five past performance references within the past five years, and a signed limitations on subcontracting certificate (VAAR 852.219-75). All submissions must be emailed to Angela Kennedy at angela.kennedy2@va.gov, with questions due by August 14, 2026 at 12:00 PM CDT.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| ATTACHMENT PAST PERFORMACE QUESTIONAIRE.docx | DOCX document | |
| ATTACHMENT LIST OF PAST PERFORMANCE REFERENCES.docx | DOCX document | |
| Harrison Co WD 15-5147.txt | TXT text file | |
| Escambia Co WD 15-4561.txt | TXT text file |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
36C25627Q0004
PAGE 1 OF
1. REQUISITION NO.
2. CONTRACT NO.
3. AWARD/EFFECTIVE DATE
4. ORDER NO.
5. SOLICITATION NUMBER
6. SOLICITATION ISSUE DATE
a. NAME
b. TELEPHONE NO. (No Collect Calls)
8. OFFER DUE DATE/LOCAL
TIME
9. ISSUED BY
CODE
10. THIS ACQUISITION IS
UNRESTRICTED OR
SET ASIDE:
% FOR:
SMALL BUSINESS
HUBZONE SMALL
BUSINESS
SERVICE-DISABLED
VETERAN-OWNED
SMALL BUSINESS
WOMEN-OWNED SMALL BUSINESS
(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED
SMALL BUSINESS PROGRAM
EDWOSB
8(A)
NAICS:
SIZE STANDARD:
11. DELIVERY FOR FOB DESTINA-
TION UNLESS BLOCK IS
MARKED
SEE SCHEDULE
12. DISCOUNT TERMS
13a. THIS CONTRACT IS A
RATED ORDER UNDER
DPAS (15 CFR 700)
13b. RATING
14. METHOD OF SOLICITATION
RFQ
IFB
RFP
15. DELIVER TO
CODE
16. ADMINISTERED BY
CODE
17a. CONTRACTOR/OFFEROR
CODE
FACILITY CODE
18a. PAYMENT WILL BE MADE BY
CODE
TELEPHONE NO.
UEI:
EFT:
PHONE:
FAX:
17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER 18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW IS CHECKED
SEE ADDENDUM
19.
20.
21.
22.
23.
24.
ITEM NO.
SCHEDULE OF SUPPLIES/SERVICES
QUANTITY
UNIT
UNIT PRICE
AMOUNT
(Use Reverse and/or Attach Additional Sheets as Necessary)
25. ACCOUNTING AND APPROPRIATION DATA
26. TOTAL AWARD AMOUNT (For Govt. Use Only) 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA
ARE
ARE NOT ATTACHED.
27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA
ARE
ARE NOT ATTACHED
28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN _______________
29. AWARD OF CONTRACT: REF. ___________________________________ OFFER
COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND
DATED ________________________________. YOUR OFFER ON SOLICITATION
DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY
(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE
ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED
SET FORTH HEREIN IS ACCEPTED AS TO ITEMS:
30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER) 30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (TYPE OR PRINT) 31c. DATE SIGNED
AUTHORIZED FOR LOCAL REPRODUCTION
(REV. NOV 2021)
PREVIOUS EDITION IS NOT USABLE
Prescribed by GSA - FAR (48 CFR) 53.212
7. FOR SOLICITATION
INFORMATION CALL:
STANDARD FORM 1449
SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES
OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30
36C25627Q0004 08-07-2026 Angela Kennedy 228-523-6004 08-21-2026 12pm
CDT
00586 Department of Veterans Affairs Gulf Coast Veterans Healthcare Systemn Network Contracting Office 16 400 Veterans Avenue Biloxi MS 39531 X X 811210 $34 Million N/A X 00586 Department of Veterans Affairs Gulf Coast Veterans Healthcare System Surgical Processing Service 400 Veterans Avenue Biloxi MS 39531 10N16 Department of Veterans Affairs Gulf Coast Veterans Healthcare System Network Contracting Office 16 400 Veterans Avenue Biloxi MS 39531
FSC e-Invoice Payment http://www.fsc.va.gov/fsc/einvoice.asp Invoice Setup Information 1-877-489-6135 invoice must be submitted electronically 1-877-489-6135 See CONTINUATION Page Network Contracting Office 16 is seeking SDVOSBs capable of providing surgical instrument repair and maintenance services for the Gulf Coast Veterans Healthcare System, Biloxi, MS and the Joint Ambulatory Care Center Pensacola, FL, as per the Statement of Work herein.
All questions are due by 12PM, CT on Friday, August 14, 2026 and all quotes are due by 12PM CT on Friday, August 21, 2026 via email only to: angela.kennedy2@va.gov.
**PLEASE PAY SPECIAL ATTENTION TO SECTION E.1 -
INSTRUCTIONS TO OFFERORS**
Harrison County Wage Determination 15-5147 Rev 30 attached Escambia County Wage Determination 15-4561 Rev 32 attached See CONTINUATION Page X X X Table of Contents
| SECTION A | 1 |
| A.1 SF 1449 SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES | 1 |
| SECTION B - CONTINUATION OF SF 1449 BLOCKS | 4 |
| B.1 CONTRACT ADMINISTRATION DATA | 4 |
| B.2 STATEMENT OF WORK (SOW) | 5 |
| B.3 PRICE/COST SCHEDULE | 10 |
| ITEM INFORMATION | 10 |
| SECTION C - CONTRACT CLAUSES | 13 |
| C.1 ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES | 13 |
| C.2 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000) | 13 |
| C.3 52.222-42 STATEMENT OF EQUIVALENT RATES FOR FEDERAL HIRES (MAY 2014) | 13 |
| C.4 52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS (DEVIATION APR 2026) | 14 |
| C.5 52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (NOV 2025) (DEVIATION) | 15 |
| C.6 VAAR 852.204-72 PERSONNEL VETTING AND CREDENTIALING (DEVIATION) (MAR 2026) | 24 |
| C.7 VAAR 852.219-73 VA NOTICE OF TOTAL SET-ASIDE FOR CERTIFIED SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESSES (JAN 2023) (DEVIATION) | 27 |
| C.8 VAAR 852.219-75 VA NOTICE OF LIMITATIONS ON SUBCONTRACTING—CERTIFICATE OF COMPLIANCE FOR SERVICES AND CONSTRUCTION (JAN 2023) (DEVIATION) | 30 |
| C.9 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) | 32 |
| C.10 VAAR 852.252-70 SOLICITATION PROVISIONS OR CLAUSES INCORPORATED BY REFERENCE (JAN 2008) | 32 |
| SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR ATTACHMENTS | 33 |
| Escambia Co WD 15-4561. | 33 |
| Harrison Co WD 15-5147. | 33 |
| Attachment 1 LIST OF PAST PERFORMANCE REFERENCES. | 33 |
| Attachment 2 PAST PERFORMACE QUESTIONAIRE. | 33 |
| SECTION E - SOLICITATION PROVISIONS | 34 |
| E.1 ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES | 34 |
| E.2 52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (OCT 2025) (DEVIATION) | 36 |
| E.3 52.216-1 TYPE OF CONTRACT (NOV 2025) (DEVIATION) | 37 |
| E.4 52.240-90 SECURITY PROHIBITIONS AND EXCLUSIONS REPRESENTATIONS AND CERTIFICATIONS (NOV 2025) (DEVIATION) | 37 |
| E.5 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) | 41 |
SECTION B - CONTINUATION OF SF 1449 BLOCKS
B.1 CONTRACT ADMINISTRATION DATA
1. Contract Administration: All contract administration matters will be handled by the following individuals:
a. CONTRACTOR:
b. GOVERNMENT: Contracting Officer 36C256 Angela Kennedy Department of Veterans Affairs Gulf Coast Veterans Healthcare Systemn Network Contracting Office 16 400 Veterans Avenue Biloxi MS 39531
2. CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with:
| [X] |
| 52.232-33, Payment by Electronic Funds Transfer—System For Award Management, or |
| [] |
| 52.232-36, Payment by Third Party |
3. INVOICES: Invoices shall be submitted in arrears:
| a. Quarterly | [] |
| b. Semi-Annually | [] |
| c. Other | [X] Monthly in arrears |
4. GOVERNMENT INVOICE ADDRESS: All Invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment Requests.
ACKNOWLEDGMENT OF AMENDMENTS: The offeror acknowledges receipt of amendments to the Solicitation numbered and dated as follows:
| AMENDMENT NO |
| DATE |
Page 1 of Page 1 of
B.2 STATEMENT OF WORK (SOW)
1. Contract Title: Surgical Instrument Repair Service
2. Background: Surgical Processing Service continues to require an on-site instrument repair/maintenance service.
3. Scope. The Gulf Coast Veterans Health Care System (GCVHCS), Biloxi, MS, requires a Contractor to provide monthly on-site same day services, to repair, refurbish, and assess for replacement, surgical instrument for use in operating room procedures, for rigid sterilization containers, and for case carts used for instrument transport at the GCVHCS, Biloxi MS and Joint Ambulatory Care Center, Pensacola FL.
Preventive Maintenance (PM), scheduled repairs, refurbishment and assessment for replacement shall include but is not limited to all specialty trays by service (Ortho, ENT, etc.) scissors, osteotomes, curettes, periosteal elevators, gouges, knives to include sizes from micro to amputation, rongeurs, bone cutters, pin cutters, burrs, drill bits, all surgical forceps/clamps, all retractors, and all needle holders to include insert replacement. Contractor shall track refurbishing history by set to determine service schedule rotation.
The Contractor shall provide repair service, which may consist of calibrating, cleaning, stain removal, lubricating, adjusting, replacing parts, and maintaining the equipment, insulation electrical safety inspection, as required by instrument type, including all emergency calls necessary between regular repairs. Upon completion of repair, refurbishment, and testing of the submitted instruments, rigid sterilization containers and case carts, the contractor must return the equipment to the Sterile Processing Section (SPS). Additionally, the contractor must also provide a summary document upon delivery of processed sterilization containers, case carts, and instruments containing the following information: date of repair, instrument type, type of repair and cost.
4. Specifications/Characteristics:
The Contractor shall ensure that the instrument repairs and service functions are performed in conformance with ANSI-AAMI ST-79:2010 Part 7.7 (Servicing and Repairs of Devices in the Health Care Facility) and specifications used by the instrument manufacturer.
Instruments, rigid sterilization containers, and case carts are to be retrieved from the operating room and delivered to the Sterile Processing Department (SPD) located at the GCVHCS, 400 Veterans Avenue, Building 3, 3rd Floor, Room 3D113, Biloxi, Mississippi, 39531.
Specific Mandatory Task and Associated Deliverables
| 1. | The Contractor shall provide all necessary labor, equipment, materials, supervision, test equipment, repair/replacement parts, travel, and transportation to provide instrument sharpening/repair, rigid sterilization container repair and case cart repair. |
| 2. | Services shall be performed monthly on-site at the GCVHCS Biloxi MS campus; and 4 times a year at the Joint Ambulatory Care Center, Pensacola FL. |
| 3. | Instruments, rigid sterilization containers, and case carts are to be retrieved from the operating room and delivered to the SPS located at the GCVHCS. |
| 4. | Provide repairs, maintenance, and testing of surgical instruments, repairs for rigid sterilization containers and case carts. |
| 5. | Repairs shall be completed on-site as a same day service in a mobile repair vehicle. |
| 6. | The repair vendor will provide multiple levels of repair service including, but not limited to two-hour turn-around, same-day turn-around, 24-hour turn-around, weekend service, mail-in repair service, and on-site repair service. |
| 7. | The repair vendor will provide technician(s) for on-site repair so entire services can be repaired, refurbished, and etched. |
| 8. | The repair vendor must be capable of repairing 10 sets per visit. |
| 9. | Magnification technology must be utilized during the repair process to diagnose, document, and educate regarding repairs made for the day. Surgical instrument maintenance and repair will be handled with care. The contractor will be required to test instruments for accurate alignment, sharpness, insulation, and calibration. The contractor will return instruments in as good as new condition. All instruments shall be repaired and maintained in proper operating conditions as specified by the original manufacturer. |
| 10. | The finish of the surgical instruments will be maintained to manufacturer’s specifications. |
| 11. | The manufacturer’s part numbers, and catalog numbers shall be preserved on all repaired or refurbished instruments. |
| 12. | The repair vendor will not repair Pakistan surgical instruments. |
| 13. | Instruments that cannot be repaired or refurbished due to cracking, pitting, corrosion, or exceeding life expectancy will be removed and will be tagged for replacement. |
| 14. | Rigid sterilization containers and case carts that cannot be repaired or refurbished due to cracking, corrosion, or exceeding life expectancy will be removed and exceptions tagged for replacement |
| 15. | The contractor must provide a summary document upon delivery of processed instruments, rigid sterilization container, and case cart containing the following information: date of repair, instrument type, type of repair, and cost. |
| 16. | All single instrument and surgical trays, rigid sterilization containers and case carts picked up/delivered by contractor will be properly listed for accountability verification. |
| 17. | The Contractor's employee(s) shall report to SPS upon arrival at GCVHCS for pickup and return of instruments, rigid sterilization containers, and case carts. |
| 18. | If instruments, rigid sterilization containers, or case carts cannot be repaired, they must be marked or tagged and returned to SPS. |
| 19. | Individual instrument, rigid sterilization container and case cart repairs will be performed Monday through Friday between the hours of 8:00 am through 4:00 pm, excluding weekends and national holidays. |
| 20. | Instruments and rigid sterilization containers should be returned by the vendor via Hand Delivery or Courier Services. |
| 21. | Instrument, rigid sterilization container, and case cart repairs completed on-site at the GCVHCS in a mobile repair lab/vehicle or within the hospital in a designated space. The mobile repair vehicle should be self-sustained with electrical power, air compressor, tools, etc. Safety cones must be utilized around the perimeter of the mobile repair vehicle to ensure the safety of hospital and vendor staff. Any equipment needed to set up repair lab within the hospital must be done at the expense of the contractor. |
| 22. | All urgent instrument repairs will have a 48-hour turnaround time. |
| 23. | All emergency instrument repairs will have a 24-hour turnaround time. |
| 24. | If an instrument, rigid sterilization container or case cart is un-repairable, it must be marked or tagged and returned to the SPS Chief or designee. |
| 25. | The vendor will conduct a continuous review of the condition of the sets and make recommendations for adjusting the repair frequencies for individual sets and on-site repair visit frequency. |
| 26. | The contractor shall submit invoices via the Tungsten Network for payment. |
| 27. | Surgical Instrument Tray Maintenance (By Specialty). |
| 28. | Specialty surgical instruments maintenance and repairs should be performed in the contractor’s mobile repair vehicle or on the grounds of the GCVHCS in Biloxi, MS or JACC in Pensacola, FL. |
| 29. | All instruments that can be disassembled will be disassembled and undergo a detailed contractor inspection. |
| 30. | Instruments will not be altered, changed, or tampered with and will be repaired following manufacturers’ original design specifications and in compliance with ANSI-AAMI ST-79 part 7.7. |
| 31. | Instruments such as Kerrison Rongeurs, Biopsy Punches, Graspers, Scissors, and Endoscopic – Arthroscopic devices will be disassembled for maintenance and repaired. They will also be sharpened and aligned in accordance with the manufacturer’s original specifications and in compliance with ANSI-AAMI ST- 79 part 7.7. Endoscopic instrument repair/refurbishment to include testing/replacing insulation. |
| 32. | Surgical Picks, Nerve Hooks, Needle Holders, etc., will be straightened or aligned as to maintain their original manufacturer’s configuration. |
| 33. | Specific custom-made instruments will be repaired in coordination with OR surgeons (end- user) specifications. |
| 34. | Suction tubes (Poole, Adson, Frazier Baron, and Yankauer) will be inspected, and interior lumen flushed and inspected. |
| 35. | All instruments will be stain- free with a finish that complies with the manufacturer’s specifications. |
| 36. | Delicate sharp, pointed eye instruments will be returned covered with appropriate tip protectors. |
| 37. | Repair/Refurbish instrument trays, sterilization containers and surgical case carts to include replacement parts. |
| 38. | Application/Removal of permanent instrument color coding. |
| 39. | Staff in-servicing on care, handling of surgical instruments and devices. |
Progress and Compliance
| 1. | The contractor shall make recommendations for surgical instrument and rigid sterilization container replacement, which may be pertinent to meet the scope of surgical trays completion. |
| 2. | Continued instrument, rigid sterilization container and case cart repairs, quality improvement monitoring, and turnaround time, as well as contract compliance, will be jointly monitored by SPD and the COR. |
| 3. | All repairs shall be completed according with all terms within this Statement of Work. |
| 4. | In the event of inclement weather, natural disaster, or other unforeseen circumstances preventing a scheduled on-site repair visit the SPD Chief will be contacted the day of the scheduled visit. Dates available for re-scheduling the scheduled on-site will be provided to the SPD Chief within in three (3) business days of the originally scheduled on-site repair visit. |
Vendor/Contractor Requirements:
Contractor shall be compliant with relevant VA Policies and with AAMI ST-79:2010 Part 7.7 standards (Servicing and Repairs of Devices in the Health Care Facility).
Subtask 2: The contractor’s employees performing the on-site annual instrument maintenance or single instrument repairs in the mobile unit or on the premises of the GCVHCS on an as needed basis. Contractor will be required to provide a list of processed instruments containing the following information: date of repair, instrument type, type of repair, and cost Deliverables: List of processed instruments containing date of repair, instrument type, type of repair, and cost
Documentation Requirements:
Repaired instruments, rigid sterilization containers, and case carts returned to SPS will be on a detailed list/document provided by the contractor containing the following information: date of repair, instrument type, type of repair, and cost The handwritten checklist/delivery slip will be checked against the instruments, rigid sterilization containers and case carts returned after repairs
6. Delivery.
| Sterile Processing Service (SPS) | Sterile Processing Service | ||
| GCVHCS, Biloxi MS | JACC, Pensacola, FL | ||
| 400 Veterans Avenue, | 790 Veterans Way, | ||
| Building 3, 3rd Floor, Room 3D113, | Pensacola, 32507 |
Biloxi, Mississippi, 39531
B.3 PRICE/COST SCHEDULE
ITEM INFORMATION
| ITEM NUMBER |
| DESCRIPTION OF SUPPLIES/SERVICES |
| QUANTITY |
| UNIT |
| UNIT PRICE |
| AMOUNT |
| 12.00 |
| MO |
| __________________ |
| __________________ |
1 12.00 3019-00 Contractor to provide monthly onsite preventive maintenance and repair services for surgical instruments for the Gulf Coast Veterans Health Care System, Biloxi, MS, in accordance with the Statement of Work Contract Period: Option BASE POP Begin: 10-01-2026 POP End: 09-30-2027 PRINCIPAL NAICS CODE: 811210 - Electronic and Precision Equipment Repair and Maintenance PRODUCT/SERVICE CODE: J065 - Maintenance, Repair, and Rebuilding of Equipment - Medical, Dental, and Veterinary Equipment and Supplie Contract Period: Base POP Begin: 10-01-2026 POP End: 09-30-2027
LOCAL STOCK NUMBER: 3019-00
| 4.00 |
| QTR |
| __________________ |
| __________________ |
6 4.00 3019-00 Contractor to provide Quarterly onsite preventive maintenance and repair services for surgical instruments for the Joint Ambulatory Care Center Pensacola, FL in accordance with the Statement of Work Contract Period: Option BASE POP Begin: 10-01-2026 POP End: 09-30-2027 PRINCIPAL NAICS CODE: 811210 - Electronic and Precision Equipment Repair and Maintenance PRODUCT/SERVICE CODE: J065 - Maintenance, Repair, and Rebuilding of Equipment - Medical, Dental, and Veterinary Equipment and Supplies Contract Period: Base POP Begin: 10-01-2026 POP End: 09-30-2027
| 12.00 |
| MO |
| __________________ |
| __________________ |
1 12.00 3019-00 Contractor to provide monthly onsite preventive maintenance and repair services for surgical instruments for the Gulf Coast Veterans Health Care System, Biloxi, MS, in accordance with the Statement of Work Contract Period: Option 1 POP Begin: 10-01-2027 POP End: 09-30-2028
| 4.00 |
| QTR |
| __________________ |
| __________________ |
6 4.00 3019-00 Contractor to provide Quarterly onsite preventive maintenance and repair services for surgical instruments for the Joint Ambulatory Care Center Pensacola, FL in accordance with the Statement of Work Contract Period: Option BASE POP Begin: 10-01-2026 POP End: 09-30-2027 PRINCIPAL NAICS CODE: 811210 - Electronic and Precision Equipment Repair and Maintenance PRODUCT/SERVICE CODE: J065 - Maintenance, Repair, and Rebuilding of Equipment - Medical, Dental, and Veterinary Equipment and Supplies Contract Period: Option 1 POP Begin: 10-01-2027 POP End: 09-30-2028
| 12.00 |
| MO |
| __________________ |
| __________________ |
1 12.00 3019-00 Contractor to provide monthly onsite preventive maintenance and repair services for surgical instruments for the Gulf Coast Veterans Health Care System, Biloxi, MS, in accordance with the Statement of Work Contract Period: Option 2 POP Begin: 10-01-2028 POP End: 09-30-2029
| 4.00 |
| QTR |
| __________________ |
| __________________ |
6 4.00 3019-00 Contractor to provide Quarterly onsite preventive maintenance and repair services for surgical instruments for the Joint Ambulatory Care Center Pensacola, FL in accordance with the Statement of Work Contract Period: Option BASE POP Begin: 10-01-2026 POP End: 09-30-2027 PRINCIPAL NAICS CODE: 811210 - Electronic and Precision Equipment Repair and Maintenance PRODUCT/SERVICE CODE: J065 - Maintenance, Repair, and Rebuilding of Equipment - Medical, Dental, and Veterinary Equipment and Supplies Contract Period: Option 2 POP Begin: 10-01-2028 POP End: 09-30-2029
| 12.00 |
| MO |
| __________________ |
| __________________ |
1 12.00 3019-00 Contractor to provide monthly onsite preventive maintenance and repair services for surgical instruments for the Gulf Coast Veterans Health Care System, Biloxi, MS, in accordance with the Statement of Work Contract Period: Option 3 POP Begin: 10-01-2029 POP End: 09-30-2030
| 4.00 |
| QTR |
| __________________ |
| __________________ |
6 4.00 3019-00 Contractor to provide Quarterly onsite preventive maintenance and repair services for surgical instruments for the Joint Ambulatory Care Center Pensacola, FL in accordance with the Statement of Work Contract Period: Option BASE POP Begin: 10-01-2026 POP End: 09-30-2027 PRINCIPAL NAICS CODE: 811210 - Electronic and Precision Equipment Repair and Maintenance PRODUCT/SERVICE CODE: J065 - Maintenance, Repair, and Rebuilding of Equipment - Medical, Dental, and Veterinary Equipment and Supplies Contract Period: Option 3 POP Begin: 10-01-2029 POP End: 09-30-2030
| 12.00 |
| MO |
| __________________ |
| __________________ |
1 12.00 3019-00 Contractor to provide monthly onsite preventive maintenance and repair services for surgical instruments for the Gulf Coast Veterans Health Care System, Biloxi, MS, in accordance with the Statement of Work Contract Period: Option 4 POP Begin: 10-01-2030 POP End: 09-30-2031
| 4.00 |
| QTR |
| __________________ |
| __________________ |
6 4.00 3019-00 Contractor to provide Quarterly onsite preventive maintenance and repair services for surgical instruments for the Joint Ambulatory Care Center Pensacola, FL in accordance with the Statement of Work Contract Period: Option BASE POP Begin: 10-01-2026 POP End: 09-30-2027 PRINCIPAL NAICS CODE: 811210 - Electronic and Precision Equipment Repair and Maintenance PRODUCT/SERVICE CODE: J065 - Maintenance, Repair, and Rebuilding of Equipment - Medical, Dental, and Veterinary Equipment and Supplies Contract Period: Option 4 POP Begin: 10-01-2030 POP End: 09-30-2031
| GRAND TOTAL |
| __________________ |
Base Period Total
Option Year One (1) Total
Option Year Two (2) Total
Option Year Three (3) Total
Option Year Four (4) Total
Contract GRAND TOTAL
SECTION C - CONTRACT CLAUSES
C.1 ADDENDUM to FAR 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES Clauses that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.
The following clauses are incorporated into 52.212-4 as an addendum to this contract:
C.2 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)
(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.
(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.
(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed five (5) years.
(End of Clause)
C.3 52.222-42 STATEMENT OF EQUIVALENT RATES FOR FEDERAL HIRES (MAY 2014)
In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor (29 CFR Part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C.5341 or 5332.
This Statement is for Information Only:
It is not a Wage Determination
| Employee Class |
| Monetary Wage-Fringe Benefits |
| 23460 Instrument Mechanic |
| WG-10 |
(End of Clause) C.4 52.222-90 ADDRESSING DEI DISCRIMINATION BY FEDERAL CONTRACTORS (DEVIATION APR 2026) (a)Definitions. As used in this clause— Program participation means membership or participation in, or access or admission to: training, mentoring, or leadership development programs; educational opportunities; clubs; associations; or similar opportunities that are sponsored or established by the contractor or subcontractor.
Racially discriminatory diversity, equity, and inclusion (DEI) activities means disparate treatment based on race or ethnicity in the recruitment, employment (e.g., hiring, promotions), contracting (e.g., vendor agreements), program participation, or allocation or deployment of an entity's resources.
(b) In connection with the performance of work under this contract, the Contractor agrees as follows:
(1) The Contractor will not engage in any racially discriminatory DEI activities;
(2) The Contractor will furnish all information and reports, including providing access to books, records, and accounts, as required by the Contracting Officer, for purposes of ascertaining compliance with this clause;
(3) In the event of the Contractor's or a subcontractor's noncompliance with this clause, this contract may be canceled, terminated, or suspended in whole or in part, and the Contractor or subcontractor may be declared ineligible for further Government contracts;
(4) The Contractor will report any subcontractor's known or reasonably knowable conduct that may violate this clause to the Contracting Officer and take any appropriate remedial actions directed by the Contracting Officer; and
(5) The Contractor will inform the Contracting Officer if a subcontractor sues the Contractor and the suit puts at issue, in any way, the validity of this clause.
(6) The Contractor recognizes that compliance with the requirements of this clause are material to the Government's payment decisions for purposes of 31 U.S.C. 3729(b)(4).
(c) The Contractor must include the substance of this clause, including this paragraph (c), in subcontracts at any tier, including those for commercial products and commercial services, except those where the place of delivery or performance is outside the United States.
(End of Clause)
C.5 52.240-91 SECURITY PROHIBITIONS AND EXCLUSIONS (NOV 2025) (DEVIATION)
(a) Definitions. As used in this clause— American Security Drone Act-covered foreign entity means an entity included on a list that the Federal Acquisition Security Council (FASC) develops and maintains and publishes in the System for Award Management (SAM) at https://www.sam.gov (section 1822 of Pub. L. 118-31, 41 U.S.C. 3901 note prec.).
Backhaul means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network (e.g., connecting cell phones/towers to the core telephone network). Backhaul can be wireless (e.g., microwave) or wired (e.g., fiber optic, coaxial cable, Ethernet).
Covered application means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or an entity owned by ByteDance Limited.
Covered article, as defined in 41 U.S.C. 4713(k), means:
(1) Information technology, as defined in 40 U.S.C. 11101, including cloud computing services of all types;
(2) Telecommunications equipment or telecommunications service, as those terms are defined in section 3 of the Communications Act of 1934 (47 U.S.C. 153);
(3) The processing of information on a Federal or non-Federal information system, subject to the requirements of the Controlled Unclassified Information program (see 32 CFR part 2002); or
(4) Hardware, systems, devices, software, or services that include embedded or incidental information technology.
Covered foreign country means The People’s Republic of China.
Covered telecommunications equipment or services means—
(1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities);
(2) For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities);
(3) Telecommunications or video surveillance services provided by such entities or using such equipment; or
(4) Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country.
Critical technology means—
(1) Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations;
(2) Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled—
(i) Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, nuclear nonproliferation, or missile technology; or
(ii) For reasons relating to regional stability or surreptitious listening;
(3) Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities);
(4) Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of nuclear equipment and material);
(5) Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title 42 of such Code; or
(6) Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. 4817).
FASC-prohibited unmanned aircraft system means an unmanned aircraft system manufactured or assembled by an American Security Drone Act—covered foreign entity.
FASCSA order means any of the following orders issued under the Federal Acquisition Supply Chain Security Act (FASCSA) requiring removing covered articles from executive agency information systems or excluding one or more named sources or named covered articles from executive agency procurement actions, as described in 41 CFR 201-1.303(d) and (e):
(1) The Secretary of Homeland Security may issue FASCSA orders that apply to civilian agencies, to the extent not covered by paragraph (2) or (3) of this definition. This type of FASCSA order may be referred to as a Department of Homeland Security (DHS) FASCSA order.
(2) The Secretary of Defense may issue FASCSA orders that apply to the Department of Defense (DoD) and national security systems other than sensitive compartmented information systems. This type of FASCSA order may be referred to as a DoD FASCSA order.
(3) The Director of National Intelligence (DNI) may issue FASCSA orders that apply to the intelligence community and sensitive compartmented information systems, to the extent not covered by paragraph (2) of this definition. This type of FASCSA order may be referred to as a DNI FASCSA order.
Information technology, as defined in 40 U.S.C. 11101(6)—
(1) Means any equipment or interconnected system or subsystem of equipment, used in the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information by the executive agency, if the equipment is used by the executive agency directly or is used by a contractor under a contract with the executive agency that requires the use—
(i) Of that equipment; or
(ii) Of that equipment to a significant extent in the performance of a service or the furnishing of a product;
(2) Includes computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary for security and surveillance), peripheral equipment designed to be controlled by the central processing unit of a computer, software, firmware and similar procedures, services (including support services), and related resources; but
(3) Does not include any equipment acquired by a Federal contractor incidental to a Federal contract.
Intelligence community, as defined by 50 U.S.C. 3003(4), means the following—
(1) The Office of the Director of National Intelligence;
(2) The Central Intelligence Agency;
(3) The National Security Agency;
(4) The Defense Intelligence Agency;
(5) The National Geospatial-Intelligence Agency;
(6) The National Reconnaissance Office;
(7) Other offices within the Department of Defense for the collection of specialized national intelligence through reconnaissance programs;
(8) The intelligence elements of the Army, the Navy, the Air Force, the Marine Corps, the Coast Guard, the Federal Bureau of Investigation, the Drug Enforcement Administration, and the Department of Energy;
(9) The Bureau of Intelligence and Research of the Department of State;
(10) The Office of Intelligence and Analysis of the Department of the Treasury;
(11) The Office of Intelligence and Analysis of the Department of Homeland Security; or
(12) Such other elements of any department or agency as may be designated by the President, or designated jointly by the Director of National Intelligence and the head of the department or agency concerned, as an element of the intelligence community.
Interconnection arrangement means arrangements governing the physical connection of two or more networks to allow the use of another’s network to hand off traffic where it is ultimately delivered (e.g., connecting a customer of telephone provider A to a customer of telephone company B) or sharing data and other information resources.
Kaspersky Lab-covered article means any hardware, software, or service that—
(1) Is developed or provided by a Kaspersky Lab-covered entity;
(2) Includes any hardware, software, or service developed or provided in whole or in part by a Kaspersky Lab-covered entity; or
(3) Contains components using any hardware or software developed in whole or in part by a Kaspersky Lab-covered entity.
Kaspersky Lab-covered entity means—
(1) Kaspersky Lab;
(2) Any successor entity to Kaspersky Lab, including any change in name, e.g., “Kaspersky”;
(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or
(4) Any entity of which Kaspersky Lab has a majority ownership.
National security system, as defined in 44 U.S.C. 3552, means any information system (including any telecommunications system) used or operated by an agency or by a contractor of an agency, or other organization on behalf of an agency—
(1) The function, operation, or use of which involves intelligence activities; involves cryptologic activities related to national security; involves command and control of military forces; involves equipment that is an integral part of a weapon or weapons system; or is critical to the direct fulfillment of military or intelligence missions, but does not include a system that is to be used for routine administrative and business applications (including payroll, finance, logistics, and personnel management applications); or
(2) Is protected at all times by procedures established for information that have been specifically authorized under criteria established by an Executive order or an Act of Congress to be kept classified in the interest of national defense or foreign policy.
Roaming means cellular communications services (e.g., voice, video, data) received from a visited network when unable to connect to the facilities of the home network either because signal coverage is too weak or because traffic is too high.
Sensitive compartmented information means classified information concerning or derived from intelligence sources, methods, or analytical processes, which is required to be handled within formal access control systems established by the Director of National Intelligence.
Sensitive compartmented information system means a national security system authorized to process or store sensitive compartmented information.
Source means a non-Federal supplier, or potential supplier, of products or services, at any tier.
Subsidiary means an entity in which more than 50 percent of the entity is owned directly by a parent corporation or through another subsidiary of a parent corporation.
Substantial or essential component means any component necessary for the proper function or performance of a piece of equipment, system, or service.
Unmanned aircraft means an aircraft that is operated without the possibility of direct human intervention from within or on the aircraft (49 U.S.C. 44801(11)).
Unmanned aircraft system means an unmanned aircraft and associated elements (including communication links and the components that control the unmanned aircraft) that are required for the operator to operate safely and efficiently in the national airspace system (49 U.S.C. 44801(12)).
(b) Prohibitions on providing or using specific products or services in performance of contract. Unless a waiver or exception applies, the Contractor is prohibited from providing any products or services to the Government or using in the performance of the contract any of the following:
(1) A covered application on any information technology owned or managed by the Government, or on any information technology used or provided by the Contractor under this contract, including equipment provided by the Contractor’s employees (section 102 of Division R of the Consolidated Appropriations Act, 2023 (Pub. L. 117-328));
(2) A Kaspersky Lab-covered article (Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91));
(3) Covered telecommunications equipment or services used as a substantial or essential component of any system, or as critical technology as part of any system (paragraphs (a)(1)(A) of section 889 of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232)). This does not prohibit contractors from providing—
(i) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or
(ii) Telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.
(c) Prohibition on unmanned aircraft systems manufactured or assembled by American Security Drone Act—covered foreign entities.
(1) Prohibition. The Contractor is prohibited from—
(i) Delivering any FASC-prohibited unmanned aircraft system, which includes unmanned aircraft (i.e., drones) and associated elements (sections 1823 and 1826 of American Security Drone Act of 2023, within the National Defense Authorization Act for Fiscal Year 2024, Pub. L. 118-31, Div. A, Title XVIII, Subtitle B, 41 U.S.C. 3901 note prec.);
(ii) On or after December 22, 2025, operating a FASC-prohibited unmanned aircraft system in the performance of the contract (section 1824 of Pub. L. 118-31); and
(iii) On or after December 22, 2025, using Federal funds to procure or operate a FASC-prohibited unmanned aircraft system (section 1825 of Pub. L. 118-31).
(2) Procedures. The Contractor shall search SAM for the FASC-maintained list of American Security Drone Act—covered foreign entities before proposing, or using in performance of the contract, any unmanned aircraft system. Also, the Contractor shall ensure any effort or expenditure associated with a FASC-prohibited unmanned aircraft system is consistent with a corresponding exemption, exception, or waiver determination expressly stated in the contract.
(3) Exemptions, exceptions, and waivers. The prohibitions in paragraph (c) of this clause do not apply where the agency has determined an exemption, exception, or waiver applies, and the contract indicates that such a determination has been made. See sections 1823 through 1825 and 1832 of Public Law 118-31 for statutory requirements pertaining to exemptions, exceptions, and waivers.
(d) Prohibition on using or providing specific products or services or conducting certain transactions regardless of connection to contract.
(1) Certain telecommunications and video surveillance equipment, systems, or services.
(i) Unless an applicable waiver has been issued by the Government, the Contractor cannot use any equipment, systems, or services that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system (paragraph (a)(1)(B) of section 889 of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232)).
(ii) This prohibition applies to using covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. This does not prohibit the contractor from using—
(A) A service that connects to the facilities of a third party, such as backhaul, roaming, or interconnection arrangements; or
(B) Telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.
(2) Office of Foreign Assets Control Restrictions.
(i) Except as authorized by the Office of Foreign Assets Control (OFAC) in the Department of the Treasury, the Contractor shall not acquire, for use in the performance of this contract, any supplies or services if any proclamation, Executive order, or statute administered by OFAC, or if OFAC’s implementing regulations at 31 CFR chapter V, would prohibit such a transaction by a person subject to the jurisdiction of the United States.
(ii) Except as authorized by OFAC, most transactions involving Cuba, Iran, and Sudan are prohibited, as are most imports from Burma or North Korea, into the United States or its outlying areas.
(A) For lists of entities and individuals subject to economic sanctions, see OFAC’s List of Specially Designated Nationals and Blocked Persons at https://home.treasury.gov/policy-issues/financial-sanctions/specially-designated-nationals-and-blocked-persons-list-sdn-human-readable-lists.
(B) For more information about these restrictions, as well as updates, see OFAC’s regulations at 31 CFR chapter V and at https://home.treasury.gov/policy-issues/office-of-foreign-assets-control-sanctions-programs-and-information.
(C) To conduct electronic screens of potential parties to regulated transactions, see the consolidated screening list at https://www.trade.gov/consolidated-screening-list, which consolidates multiple export screening lists of the Departments of Commerce, State, and the Treasury.
(3) Sudan prohibition. The Contractor is prohibited from conducting any restricted business operations in Sudan in accordance with Accountability and Divestment Act of 2007 (Pub. L. 110-174).
(4) Iran prohibitions.
(i) Unless an exception applies according to paragraph (d)(4)(iii) or the Government grants a waiver, the contractor shall not engage in certain activities or transactions relating to Iran (section 6(b)(1)(A) of Iran Sanctions Act (50 U.S.C. 1701 note).
(ii) Unless an exception applies according to paragraph (d)(4)(iii) or the Government grants a waiver, contractor shall not export certain sensitive technology to Iran, as determined by the President, and has an active exclusion in SAM (22 U.S.C. 8515).
(iii) The prohibition in paragraphs (d)(4)(i) and (d)(4)(ii) do not apply if the acquisition is subject to trade agreements and the offeror certifies that all the offered products are designated country end products or designated country construction material (see part 25).
(iv) Unless an exception applies or the Government grants a waiver, contractors are prohibited from knowingly engaging in any significant transaction (i.e., over $15,000) with Iran’s Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked according to the International Emergency Economic Powers Act (section 6(b)(1)(B) of Iran Sanctions Act (50 U.S.C. 1701 note)).
(e) Governmentwide exclusion and removal orders.
(1) Unless the Government has issued an applicable waiver, contractors shall not provide or use as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA order as follows:
(i) For solicitations and contracts awarded by a Department of Defense contracting office, DoD FASCSA orders apply.
(ii) For all other solicitations and contracts, DHS FASCSA orders apply.
(2) The Contractor shall search for the phrase “FASCSA order” in the System for Award Management (SAM) at https://www.sam.gov to locate applicable FASCSA orders.
(3) The Government may identify in the solicitation other FASCSA orders that are not in SAM, which are effective and apply to the solicitation and resulting contract.
(4) A FASCSA order issued after the date of solicitation applies to this contract only if added by an amendment to the solicitation or modification to the contract (see FAR 40.204-1(c)).
(f)Reasonable inquiry. The contractor shall conduct a reasonable inquiry to determine if there are any prohibited products or services. The inquiry will look at any information in the entity’s possession but does not need to include an internal or third-party audit.
(g) Removal of prohibited products and services. For Federal Supply Schedules, Governmentwide acquisition contracts, multi-agency contracts or any other procurement instrument intended for use by multiple agencies, upon notification from the Contracting Officer, during the performance of the contract, the Contractor shall promptly make any necessary changes or modifications to remove any product or service produced or provided by a source that this clause prohibits.
(h) General report.
(1) If the Contractor identifies or is notified by any source, (including a subcontractor at any tier), that any product or service provided or used (or to be provided or used) during contract performance does not comply with any prohibition in this clause, then the Contractor shall report the following information, or as much information is known, in writing to the contracting office as identified in paragraph (h)(2) within 72 hours:
(i) Contract number and order number, if applicable;
(ii) The specific prohibition the product or service is not complying with;
(iii) A description of the products or services that the Contractor identifies or has reason to suspect is prohibited (include brand; model number, such as the original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable);
(iv) The entity that produced the product or service (include entity name, unique entity identifier, Contractor and Government Entity (CAGE) code, facilities responsible for design, fabrication, assembly, packaging, and test of the product, and whether the entity was the OEM or a distributor (provide manufacturer codes and distributor codes used for the product));
(v) Description of the functionality of the product or service and how that functionality impacts the risk to the product or service;
(vi) An explanation of any factors relevant to determining if the product or service should be permitted by an applicable exception, exemption, or waiver (if the contractor would like the Government to consider a waiver, and asks for such a waiver);
(vii) Whether alternative products or services are available that would comply with the prohibition;
(viii) If the product or service is related to item maintenance, include the following information on the item being maintained:
(A) Brand;
(B) Model number, OEM number, manufacturer part number, or wholesaler number; and
(C) Item description, as applicable.
(ix) Any readily available information about mitigation actions implemented or recommended.
(2) If a report must be submitted to a contracting office, the Contractor shall submit the report as follows:
(i) If a Department of Defense contracting office, the Contractor shall report to the website at https://dibnet.dod.mil.
(ii) For all other contracting offices, the Contractor shall report to the Contracting Officer.
(iii) For indefinite delivery contracts, the Contractor shall report to both the contracting office for the indefinite delivery contract and the contracting office for any affected order.
(3) If the report provided does not contain any of the information required by paragraph (h)(1) of this clause, and the…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .