36C25026Q0895.docx

SOURCES SOUGHT NOTICE

GENERAL INFORMATION

Network Contracting Office 10 6100 Oak Tree Boulevard Suite 490 Cleveland OH 44131-6969

POINT OF CONTACT*

CONTRACT SPECIALIST

KEVIN PEEPLES

Kevin.peeples@va.gov 216-416-1600

NA

PLACE OF PERFORMANCE

10701 EAST BLVD.

CLEVELAND OH

ADDITIONAL INFORMATION

Sources Sought Notice Sources Sought Notice

DESCRIPTION

Sources Sought Notice

THIS REQUEST FOR INFORMATION (RFI/Sources Sought) IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AND OTHER MARKET INFORMATION IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI IN ACCORDANCE WITH (IAW) FAR 10.002(b)(2), FAR 12.101, FAR 12.103 & FAR 12.202(a).

DISCLAIMER

This request for information, sources sought (RFI/Sources Sought) is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 10.002(b)(2), FAR 12.101, FAR 12.103 & FAR 12.202(a), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI.

This is NOT a solicitation announcement. This is a sources sought/RFI only. The purpose of this sources sought/RFI is to gain knowledge of potential qualified Small Businesses under NAICS 339112, (Surgical and Medical Instrument Manufacturing industry), but does not exclude others from responding. Responses to this source sought will be used by the Government to make appropriate acquisition decisions. After review of the responses to this source sought, a solicitation announcement may be published. Responses to this source sought synopsis are not considered adequate responses for a solicitation announcement.

SOURCES SOUGHT DESCRIPTION

The Department of Veterans Affairs, Network Contracting Office 10, Louis Stokes Cleveland VA Medical Center, is seeking sources that can provide a “Accommodation Meter plusoptiX R09 (PowerRef 3) and accessories” for Surgical Department Mechanical Room that meets the following:

Product/Items

ITEM NO. DESCRIPTION QUANTIYT UNIT

OR STOCK NO.

Request purchase only of Accommodation Meter plusoptiX R09 (PowerRef 3)

1. Accommodation Meter plusoptiX R09 (PowerRef 3) incl. Medical Power Adaptor 1 EA

2. Software Licence RP Dynamic measurements of accommodation in sphere, convergence and pupil size changes in scotopic, mesopic and photopic conditions 1 EA

3. Complete measurement set-up kit (includes former MIRROR, SLIDE and REST) 1 EA

4. Shipping and Handling 1 EA

Specifications & Salient Characteristics

Technical Specifications

· Refraction (vertical meridian):

· Binocular and monocular measurement

· Spherical range: +5.00 D to –7.00 D, in increments of 0.01 D

· Pupil size:

· Range: 4.0–8.0 mm, measured in 0.1 mm steps, ±10% accuracy

· Pupil distance (interpupillary distance):

· Measured in 1.0 mm steps, ±10% accuracy

· Sampling rate:

· 50 Hz (one measurement every 20 ms)

· Measuring distance:

· Standard working distance of 1 m (± 5 cm)

· Measurement principle:

· Binocular, dynamic photoretinoscopy

Interfaces & Power Requirements

· Interfaces:

· 4 × USB ports

· 1 × VGA output (supports 1024 × 768 resolution)

· Power supply:

· AC 100–240 V, 50–60 Hz, 2.5 A (excluding monitor)

Environmental Conditions

· Operating temperature: 10–35 °C (50–92 °F)

· Storage temperature: 0–50 °C (32–122 °F)

· Relative humidity (non-condensing):

· Operating: 20–80%

· Storage: 10–85%

Data Output & Logging Measurements are continuously recorded into a CSV “logfile,” capturing:

· Timestamp (every 20 ms)

· LED brightness (percentage)

· Pupil detection status (found/not found)

· Pupil size (width & height in mm)

· Pupil brightness (digital units 0–255)

· Purkinje reflex size & position (pixels: X & Y)

· Gaze angles (horizontal & vertical in degrees)

· Spherical refraction per eye, including mean & standard deviation over last 10 frames

· Interpupillary distance in mm

· Camera horizontal angle

Salient Functional Characteristics

· Binocular dynamic measurement:

· Tracks continuous changes in accommodation (sphere), convergence, and pupil size for both eyes

· 50 Hz real-time sampling:

· High temporal resolution enables precise tracking of fast dynamics

· Open-field fixation:

· Uses a hot mirror to allow naturalistic visual targets at any distance

· Non-contact operation:

· Measurements gathered without touching the subject

· Research-grade device:

· Designed specifically for scientific applications—investigating accommodation response times, IOL performance, convergence–accommodation relationships, and neuro-ophthalmologic metrics

Integration & Output

· Data can be streamed via USB or recorded to a VGA-connected monitor

· Outputs are ideal for integration into custom research setups and signal logging systems Background: The VA-ORD-funded study “Home-based Treatment of Binocular Eye Dysfunction in Veterans with Traumatic Brain Injury” (Mark Walker, M.D., principal investigator) will investigate physiological mechanisms underlying near vision impairment in Veterans and will conduct a pilot study to explore the feasibility and potential efficacy of virtual-reality for customized home therapy of convergence insufficiency. This study requires robust measures of ocular accommodation, the change in the shape of the eye’s lens to focus on near images. For that purpose, we require a device that can measure directly changes in lens curvature and that can do this dynamically at a high enough sample rate to measure not only the amount but also the rate of accommodation. The device must also have integrated eye tracking for simultaneous measurement of ocular vergence. The PlusOptix PowerRef3 is the only currently available device that measures accommodation directly and dynamically, is portable, and includes eye tracking to measure simultaneous convergence.

Scope: Acquisition of an automated retinoscopy-based accommodation and ocular vergence measurement device, its control software, and associated measurement apparatus.

The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications.

If you are interested and can provide the sought-out supplies/services, please provide the requested information indicated below. Response to this notice should include company name, address, point of contact, DUNS number, and size of business pursuant to the following questions:

1. Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.)

2. Is your company considered small under the NAICS code identified under this RFI? If not, is your company considered small under a related NAICS code?

3. Are you the manufacturer or distributor of the items being referenced above (or equivalent product/solution)? What is the manufacturing country of origin of these items?

4. If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, point of Contact and size status (if available).

5. If you’re a small business and you are an authorized distributor/reseller for the items identified above (or an equivalent solution), do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified?

6. Does your company have an FSS contract with GSA or the NAC or are you a contract holder with NASA SEWP or any other federal contract? If so, please provide the contract type and number.

7. If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the referenced items/solutions you are providing information for available on your schedule/contract?

8. Please provide general pricing of your products/solution for market research purposes.

9. Please submit your capabilities in regard to the salient characteristics being provided and any information pertaining to “brand name or equal to” items to establish capabilities for planning purposes.

No re-manufactures or gray market items will be acceptable. Vendor shall be an Original Equipment Manufacturer (OEM), authorized dealer, authorized distributor or authorized reseller verified by an authorization letter or other documents from the OEM.

SUBMISSION

Responses to this notice shall be submitted via email to kevin.peeples@va.gov. Telephone responses shall not be accepted. Responses must be received no later than August 20, 2026, at 4:00pm EST, (Eastern Standard Time). If a solicitation is issued it shall be announced at a later date, and all interested parties must respond to that solicitation announcement separately from the responses to this request for information. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation.

Page 1 of