36C25025Q0565.docx

DOCX document 140 KB Posted May 12, 2025

Attached to: J028--Generator Preventative Maintenance and Load Bank Testing Federal contract opportunity
Solicitation number: 36C25025Q0565
Issued by: Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 10

About this file

Written by GovTribe AI · May 12, 2025

This document is a Request for Quote (RFQ) for generator load bank testing and preventative maintenance services at the Dayton VA Medical Center. The Department of Veterans Affairs Network Contracting Office is seeking a contractor to provide comprehensive generator maintenance for 19 generators across 13 buildings, with a base period from June 2025 to May 2026 and four optional one-year extension periods through May 2030. The solicitation includes annual load bank testing, which involves testing generators at 30%, 55%, and 80% of nameplate rating for a total of four hours, and preventative maintenance following a detailed 90-step checklist.

The procurement is set aside for small businesses, with a NAICS code of 811310 and a size standard of $12.5 million. The RFQ requires vendors to be registered in the System for Award Management (SAM), submit a technical narrative, pricing breakdown, past performance references, and other documentation. The response is due by May 23, 2025, at 4 PM EDT. Notably, during the third option year (Calendar Year 2028), the maintenance will also include replacing lead acid batteries on all generators. The place of performance is the Dayton VA Medical Center in Ohio, with work to be completed during engineering hours of Monday through Friday, 8:00 AM to 4:30 PM, excluding government holidays.

View the file

Other files for this federal contract opportunity

Other files attached to J028--Generator Preventative Maintenance and Load Bank Testing, newest first.
File	Type	Posted
36C25025Q0565 0001.docx	DOCX document	May 23, 2025
Dayton VA Generator Specs.xlsx	XLSX spreadsheet	May 12, 2025

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

36C25025Q0565

PAGE 1 OF

1. REQUISITION NO.

2. CONTRACT NO.

3. AWARD/EFFECTIVE DATE

4. ORDER NO.

5. SOLICITATION NUMBER

6. SOLICITATION ISSUE DATE

a. NAME

b. TELEPHONE NO. (No Collect Calls)

8. OFFER DUE

DATE/LOCAL

TIME

9. ISSUED BY

CODE

10. THIS ACQUISITION IS

UNRESTRICTED OR

SET ASIDE:

% FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

8(A)

NAICS:

SIZE STANDARD:

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ

IFB

RFP

15. DELIVER TO

CODE

16. ADMINISTERED BY

CODE

17a. CONTRACTOR/OFFEROR

CODE

FACILITY CODE

18a.

PAYMENT WILL BE MADE BY

CODE

TELEPHONE NO.

UEI:

EFT:

PHONE:

FAX:

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER 18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW IS CHECKED

SEE

ADDENDUM

19.

20.

21.

22.

23.

24.

ITEM NO.

SCHEDULE OF SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA

26.

TOTAL AWARD AMOUNT (For Govt. Use Only) 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

ARE

ARE NOT ATTACHED.

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR

52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

ARE

ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN _______________

29. AWARD OF CONTRACT: REF. ___________________________________ OFFER

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DATED ________________________________. YOUR OFFER ON SOLICITATION

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

SET FORTH HEREIN IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER) 30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (TYPE OR PRINT) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

(REV. NOV 2021)

PREVIOUS EDITION IS NOT

USABLE

Prescribed by GSA - FAR (48 CFR) 53.212

7. FOR SOLICITATION

INFORMATION CALL:

STANDARD FORM 1449

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

552-25-1-6104-0006 36C25025Q0565 05-12-2025 Mary Jane Crim 937-268-6511 X3065 05-23-2025

4PM

EDT

36C250 Department of Veterans Affairs Network Contracting Office (NCO) 10 3140 Governor’s Place Blvd. Suite 210 Kettering OH 45409-1337 X 811310 $12.5 Million N/A X 36C250 Department of Veterans Affairs Dayton VA Medical Center 4100 West Third Street Dayton OH 45428-9000 36C250 Department of Veterans Affairs Network Contracting Office (NCO) 10 3140 Governor's Place Blvd. Suite 210 Kettering OH 45409-1337

Department of Veterans Affairs Financial Services Center Invoices To Be Submitted Electronically https://www.ob10.com/us/en/veterans-affairs// Invoice Setup Info Phone 877 353 9791 512 460 5429 See CONTINUATION Page This solicitation is a request for quote (RFQ) for generator load bank testing and maintenance. The government intends to award a firm-fixed price task order with one year plus four years possible. The contractor shall provide all necessary personnel, supervision, labor, equipment, materials, and disposal necessary to provide generator load bank testing and maintenance services at the Dayton VA Medical Center pursuant to the Statement of Work described herein.

The following Wage Determination applies to this solicitation:

Wage Determination Number: 2015-4731 Revision Number: 25 Date of Revision: 12/23/2024 Available at www.sam.gov.

See CONTINUATION Page X X X Mary Jane Crim Contracting Officer Table of Contents

SECTION A	1
A.1 SF 1449 SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES	1
SECTION B - CONTINUATION OF SF 1449 BLOCKS	3
B.1 CONTRACT ADMINISTRATION DATA	3
B.2 PERFORMANCE WORK STATEMENT	3
B.3 PRICE/COST SCHEDULE	7
ITEM INFORMATION	7
SECTION C - CONTRACT CLAUSES	59
C.1 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)	59
C.2 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)	59
C.3 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)	59
C.4 52.237-1 SITE VISIT (APR 1984)	59
C.5 52.237-2 PROTECTION OF GOVERNMENT BUILDINGS, EQUIPMENT, AND VEGETATION (APR 1984)	60
C.6 VAAR 852.203-70 COMMERCIAL ADVERTISING (MAY 2018)	60
C.7 VAAR 852.215-70 SERVICE-DISABLED VETERAN-OWNED AND VETERAN-OWNED SMALL BUSINESS EVALUATION FACTORS (JAN 2023) (DEVIATION)	60
C.8 VAAR 852.215-71 EVALUATION FACTOR COMMITMENTS (OCT 2019)	60
C.9 VAAR 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (NOV 2018)	61
C.10 VAAR 852.242-71 ADMINISTRATIVE CONTRACTING OFFICER (OCT 2020)	61
C.11 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (JAN 2025) (DEVIATION FEB 2025)	62
SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR ATTACHMENTS	68
SECTION E - SOLICITATION PROVISIONS	69
E.1 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)	69
E.2 52.212-2 EVALUATION—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)	69
E.4 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS—COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAY 2024) (DEVIATION FEB 2025)	71

SECTION B - CONTINUATION OF SF 1449 BLOCKS

B.1 CONTRACT ADMINISTRATION DATA

1. Contract Administration: All contract administration matters will be handled by the following individuals:

a. CONTRACTOR: TBD

b. GOVERNMENT: Contracting Officer 36C250 Mary Jane Crim

Department of Veterans Affairs Network Contracting Office (NCO) 10 3140 Governor’s Place Blvd. Suite 210 Kettering OH 45409-1337

2. CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with:

[X]

52.232-33, Payment by Electronic Funds Transfer—System For Award Management, or

[X]

52.232-36, Payment by Third Party

3. INVOICES: Invoices shall be submitted in arrears:

a. Quarterly	[]
b. Semi-Annually	[]
c. Other	[X] Upon completion of annual services in arrears

4. GOVERNMENT INVOICE ADDRESS: All Invoices from the contractor shall be submitted electronically in accordance with VAAR Clause 852.232-72 Electronic Submission of Payment Requests.

ACKNOWLEDGMENT OF AMENDMENTS: The offeror acknowledges receipt of amendments to the Solicitation numbered and dated as follows:

AMENDMENT NO

DATE

B.2 PERFORMANCE WORK STATEMENT

1) Background: Load bank testing and preventative maintenance on the generators is required to satisfy VA Directive 1028 and NFPA code requirements for Emergency power supply systems.

2) Scope The contractor shall provide all resources necessary to accomplish the tasks described in this statement of work (SOW), except as may otherwise be specified. The contractor shall service generators located in 13 buildings as described in detail within the Specific Requirements/Tasks section.

3) Specific Tasks

Service to Load Bank Test (19 generators in total):

(1) one Generator located in Building 411

(2) two Generators 6 & 7 located in west of Building 330’s Cooling Towers

(3) Two Generators located in building 310

(4) One generator located in building 147

(5) One generator located at building 302

(6) Two generators located at building 320

(7) Four Generators located in building 330

(8) One Generator located at building 408

(9) One generator located at building 409

(10) one generator located at building 425

(11) One generator located at building 120

(12) one generator located at building 127

(13) One generator located at building 350

Generator specifications are located in attachment Dayton VA Generator Specs.

Generator shall be Load Tested at the intervals described:

30% of nameplate rating for 60 minutes, followed by 55% of nameplate rating for 60 minutes, followed by 80% of nameplate rating for 120 minutes for a total of four hours

Service to provide all material, labor and supervision needed to perform Preventative Maintenance (PM) per manufacturer specifications for (19) nineteen Emergency Generators in FY 2025 (May 2025) & nineteen Generators in Calendar 2026, 2027, 2028 & 2029. (NOTE) Option year three - generator maintenance shall include replacing the lead acid batteries on all generators.

See attached “Generator Schedule” for Generators Specifications

Generator PM Checklist

1. Visually Inspect Radiator/Heat Exchanger for Leaks, Damage and Obstruction

2. Add coolant to Bring the Coolant to it' s Correct Level (Max 2 Gals)

3. Inspect Condition of Radiator Cap. Gasket and Sealing Surface

4. Analyze Coolant for Proper antifreeze Percentage - -30

5. Analyze Conditioner SCA Level and add Additional SCA as Needed - 2000

6. Visually Inspect Water Pump and Cooling System Gaskets for Leaks

7. Inspect Flexible Water Connections for Cracking, Leaks and Pliability

8. Re-Torque Hose Clamps

9. Inspect Pulleys for Excessive Wear

10. Inspect Belts for Cracking and Fraying

11. Check Belt Tension

12. Check Jacket Water Heater(s) for Proper Operation and Adjust Thermostat Setting

13. Add Crankcase Oil to Bring the Oil to its Correct Level (Max 2 Gals) (Change Oil and Filters for Annual PM)

14. Inspect Oil Heater for Proper Operation and Check Thermostat Sea ls

15. Visually Inspect Front and Rear of Crankshaft Seals and Lubrication System Gaskets for Leaks

16. Record Fuel Level in Main Fuel Tank

17. Stick Main Tank for Water -

18. Test Day Tank Pump for Proper Operation and Level

19. Test Day Tank Alarms

20. Drain Water and Sediment from Day Tank (if accessible)

21. Clean or Replace In let Filters (during annual PM only) for Day Tank

22. Clean Primary Fuel Filter (if screen type)

23. Drain Water from Water Separator

24. Operate Fuel Priming Pump and Check for Proper Operation and Leaks

25. Check the Engine' s Fuel System for Leaks

26. Inspect Flexible Fuel Lines for Cracking, Leaks and Pliability

27. Check Governor Oil Level and Add Oil as Needed

28. Inspect Steel Fuel Lines for Cracks, Leaks and Proper Line Bracket Support

29. Check and Record Battery Cells Electrolyte Specific Gravity

30. Top Off Electrolyte Level

31. Check and Record Battery Charger Amperage

a. Equ.. Rate: - 8.5

b. Float Rate: - 5.0

32. Check Battery Charger and Adjust Float Rate for Optimum Battery Performance and Life:

a. Equ. Volts: - 29.6

b. Float Volts: - 28.4

33. Tighten Battery Cable Connections as Needed

34. Clean and Apply Corrosion Inhibitor to Terminals of Only Lead Acid Batteries as Needed

35. Inspect and Tighten Starter Motor Connections and Wiring

36. Inspect Flexible Exhaust Coupling for Cracks and Excessive Leakage

37. Visually Inspect Exterior of Exhaust Manifolds for Oil or Fuel Slobbering (signs of wet stacking)

38. Inspect Exhaust Rain Protection and/or Exhaust Outlet Screening

39. Drain Water in Exhaust Moisture Traps

40. Inspect Exhaust Manifold(s) for Broken or Missing Hardware

41. Inspect Air Filters for Plugging and Deterioration

42. Test Air Cleaner Indicator

43. Check All Air Intake Piping for Damage and Loose Connections

44. Inspect Turbocharger for Seal Leakage and Excessive End Play Clearance (if accessible)

45. Perform an Operational Check of Illumination and Safety Lamps

46. Check for and Tighten Loose Terminals on the Generator Set and Generator Control Panel

47. Check Tightness of Relays in the Generator Control Panel

48. Inspect for Excessive Dirt Accumulation in the Control Panel and Clean as Needed

49. Inspect air Cleaner Seal for Pliability and Sealing

50. Check Rotor Air Gap for Correct Clearances

51. Inspect rotor and Stator for Damage and Excessive Oil and/or Dirt build Up

52. Inspect Coupling and Guards for Loose or Missing Pa11s

53. Check Tightness of Generator Leads and Voltage Regulator Control wiring

54. Strap and Tape any Wiring or Generator Leads that Have rubbing or Worn Insulation

55. Inspect Brushes and Slip Rings or Rotating Rectifiers

56. Clean and Adjust Voltage Droop Potentiometer

57. Clean Crankcase Breather, Inspect Hose and Connections

58. Lubricate Fan Drive with Caterpillar Bearing Lubricant (annual PM only)

59. Lubricate Governor Linkage with Caterpillar Bearing Lubricant (annual PM only)

60. Lubricate Generator Bearing with Caterpillar Bearing Lubricant (annual PM only)

61. Inspect Generator Set Vibration Isolators and Adjust as Needed

62. Make a Walk Around Inspection of Complete Installation

63. Check for Unit On-Line Capability in Less Than Ten Seconds

64. Check and Record Battery Voltage Dip Level During Over crank Test for Minimum Voltage Required to Maintain Controls During Starting - 22.1

65. Check for Proper Cranking Termination Upon Starting

66. Check Proper Operation of Engine and Generator Instruments with Generator Running

67. Adjust Governor Control for Optimum Performance and Frequency - 60.0

68. Adjust Voltage Regulator for Proper Voltage - 482

69. Record Field Voltage During Generator No-Load Run for Base Line

70. Check and Record Alternator Voltage with Engine Running

71. Check for Abnormal Noise or Vibration

72. Check for Abnormal Exhaust Characteristics with Engine Running (signs of wet stacking)

73. Check for Proper Operation of Remote Fan Motors, Thermostats, Circulating Pumps, and Solenoid Valves

74. Check Inlet and Discharge Louvers for Proper Operation with Engine Running and Stopped

75. Check for Excessive Crankcase Blow-by with Engine Running

76. Re-Check Oil Level with Engine Running

77. Re-Check for Leaks with Engine Running

78. Test Auto-Start System

79. Test Safeties and Pre-alarms on Control and Annunciator Pane ls

80. Take Oil Sample (after operational checks) for Caterpillar S.O.S. Program

81. Rest All Controls to Automatic

82. Set Circuit Breaker to Correct Position

83. Check Fuel Valves for Correct Position

84. Check Voltage Regula tor is ON and NOT Tripped

85. Check Battery Charger is ON

86. Check Day Tank Controls are ON

87. Check Remote Radiator Fan Controls are ON

88. Check Auxiliary Water Pump Controls are ON

89. Check Jacket Water Heater(s) are ON

90. Check Louver Controls are ON

4) Performance Monitoring

Test results are complete, accurate, and timely.

Reports shall be submitted within 7 days of completed PM. Must be met 90% of the time.

Reports shall be complete and accurate. Must be met 90% of the time.

Work area shall be clean and tidy and in original condition. Must be met 100% of the time.

Generators shall be left in full auto and ready for an emergency. Must be met 100% of the time.

5) Security Requirements:

1. Position Sensitivity: The position sensitivity has been designated as Low risk

2. Background Investigation: A Station ID Badge is required and at this time, no background investigation is necessary. Note: All work must be complete within 15 days or less once Station ID Badge has been issued. If work is expected to take more than 15 days, then Contractor must go through the PIV Badge process with the VA Office of Security and Law Enforcement which requires a background investigation and completion of more detailed forms.

3. Contractor Responsibilities:

a. Contractor must obtain Station ID Badge from the Police, Building 127. Contractor can visit as a walk-in Monday – Friday 8:30 – 4:00pm. Must present a valid Driver’s License.

4. Government Responsibilities:

a. The VA Office of Security and Law Enforcement will provide the necessary forms to the contractor, or to the contractor’s employees, after receiving a list of names and addresses.

b. Upon receipt, the VA Office of Security and Law Enforcement will review completed forms for accuracy and forward the forms to the office of Personnel Management (OPM) to conduct background investigations.

c. The VA Office of Security and Law Enforcement will notify the CO, and contractor, of adjudication results received from OMB.

d. Upon being notified about a favorable determination, the CO may issue a notice to proceed to the contractor.

e. Access to areas & equipment to be PM & Tested

6) Place of Performance 4100 W. 3rd St. Dayton, OH 45428

Buildings: Building 411, Building 310, Building 147, Building 302, Building 320, Building 330, Building 408, Building 409, Building 425, Building 120, Building 127, and Building 350

7) Period of Performance:

The contractor shall complete the work required under this PWS starting in October of each calendar year for options one through four to be completed by the end that same year, unless otherwise directed by the Contracting Officer (CO). The base year will commence in December and shall be completed by the end of January 2025. If the contractor proposes an earlier completion date, and the Government accepts the contractor’s proposal, the contractor’s proposed completion date shall prevail. Engineering’s hours of operations are Monday thru Friday 0800-1630 no government holidays.

8) Delivery Schedule:

Deliverable No.

One Item

A detailed work plan and briefing for the VA project team

Quantity

For each generator tested Delivery Date

Within 30 calendar days after award or the fall of each year

Two

A follow up email and paper copy

For each generator tested

Within 7 calendar days of completed PM

B.3 PRICE/COST SCHEDULE

ITEM INFORMATION

ITEM NUMBER

DESCRIPTION OF SUPPLIES/SERVICES

QUANTITY

UNIT

UNIT PRICE

AMOUNT

0.00

__________________

Annual Generator Load Bank Testing Contract Period: Base POP Begin: 06-01-2025 POP End: 05-31-2026 PRINCIPAL NAICS CODE: 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance PRODUCT/SERVICE CODE: J030 - Maintenance, Repair, and Rebuilding of Equipment - Mechanical Power Transmission Equipment

0001AA

1.00

__________________

Caterpiller - Bldg.147

POP Begin: 06-01-2025 POP End: 05-31-2026 PRINCIPAL NAICS CODE: 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance PRODUCT/SERVICE CODE: J030 - Maintenance, Repair, and Rebuilding of Equipment - Mechanical Power Transmission Equipment

0001AB

1.00

__________________

Detroit - Bldg.302

0001AC

1.00

__________________

Kohler - Bldg.310/315/340 Gen. #1

0001AD

1.00

__________________

Kohler - Bldg.310/315/340 Gen. #2

0001AE

1.00

__________________

Caterpiller - Bldg.320

0001AF

1.00

__________________

Cummings - Bldg.320

0001AG

1.00

__________________

Caterpiller - Bldg.330-1

0001AH

1.00

__________________

Caterpiller - Bldg.330-2

0001AJ

1.00

__________________

Caterpiller - Bldg.330-3

0001AK

1.00

__________________

Caterpiller - Bldg.330-4

0001AL

1.00

__________________

Mult-DD Diesel Engine - Bldg.330-6

0001AM

1.00

__________________

Mult-DD Diesel Engine - Bldg.330-7

0001AN

1.00

__________________

Perkins - Bldg.408 13/3/2000

0001AP

1.00

__________________

Caterpiller - Bldg.409

0001AQ

1.00

__________________

Detroit - Bldg.411/410

0001AR

1.00

__________________

Perkins - Bldg.120 5/8/2003

0001AS

1.00

__________________

Cummings - Bldg.127 1-17-2006

0001AT

1.00

__________________

Cummings - Bldg.350

0001AU

1.00

__________________

Cummings - Bldg.425

0.00

__________________

Annual Generator Preventative Maintenance

0002AA

1.00

__________________

Caterpiller - Bldg.147

0002AB

1.00

__________________

Detroit - Bldg.302

0002AC

1.00

__________________

Kohler - Bldg.310/315/340 Gen. #1

0002AD

1.00

__________________

Kohler - Bldg.310/315/340 Gen. #2

0002AE

1.00

__________________

Caterpiller - Bldg.320

0002AF

1.00

__________________

Cummings - Bldg.320

0002AG

1.00

__________________

Caterpiller - Bldg.330-1

0002AH

1.00

__________________

Caterpiller - Bldg.330-2

0002AJ

1.00

__________________

Caterpiller - Bldg.330-3

0002AK

1.00

__________________

Caterpiller - Bldg.330-4

0002AL

1.00

__________________

Mult-DD Diesel Engine - Bldg.330-6

0002AM

1.00

__________________

Mult-DD Diesel Engine - Bldg.330-7

0002AN

1.00

__________________

Perkins - Bldg.408 13/3/2000

0002AP

1.00

__________________

Caterpiller - Bldg.409

0002AQ

1.00

__________________

Detroit - Bldg.411/410

0002AR

1.00

__________________

Perkins - Bldg.120 5/8/2003

0002AS

1.00

__________________

Cummings - Bldg.127 1-17-2006

0002AT

1.00

__________________

Cummings - Bldg.350

0002AU

1.00

__________________

Cummings - Bldg.425

0.00

__________________

Annual Generator Load Bank Testing Contract Period: Option 1 POP Begin: 06-01-2026 POP End: 05-31-2027 PRINCIPAL NAICS CODE: 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance PRODUCT/SERVICE CODE: J030 - Maintenance, Repair, and Rebuilding of Equipment - Mechanical Power Transmission Equipment

1001AA

1.00

__________________

Caterpiller - Bldg.147

POP Begin: 06-01-2026 POP End: 05-31-2027 PRINCIPAL NAICS CODE: 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance PRODUCT/SERVICE CODE: J030 - Maintenance, Repair, and Rebuilding of Equipment - Mechanical Power Transmission Equipment

1001AB

1.00

__________________

Detroit - Bldg.302

1001AC

1.00

__________________

Kohler - Bldg.310/315/340 Gen. #1

1001AD

1.00

__________________

Kohler - Bldg.310/315/340 Gen. #2

1001AE

1.00

__________________

Caterpiller - Bldg.320

1001AF

1.00

__________________

Cummings - Bldg.320

1001AG

1.00

__________________

Caterpiller - Bldg.330-1

1001AH

1.00

__________________

Caterpiller - Bldg.330-2

1001AJ

1.00

__________________

Caterpiller - Bldg.330-3

1001AK

1.00

__________________

Caterpiller - Bldg.330-4

1001AL

1.00

__________________

Mult-DD Diesel Engine - Bldg.330-6

1001AM

1.00

__________________

Mult-DD Diesel Engine - Bldg.330-7

1001AN

1.00

__________________

Perkins - Bldg.408 13/3/2000

1001AP

1.00

__________________

Caterpiller - Bldg.409

1001AQ

1.00

__________________

Detroit - Bldg.411/410

1001AR

1.00

__________________

Perkins - Bldg.120 5/8/2003

1001AS

1.00

__________________

Cummings - Bldg.127 1-17-2006

1001AT

1.00

__________________

Cummings - Bldg.350

1001AU

1.00

__________________

Cummings - Bldg.425

0.00

__________________

Annual Generator Preventative Maintenance

1002AA

1.00

__________________

Caterpiller - Bldg.147

1002AB

1.00

__________________

Detroit - Bldg.302

1002AC

1.00

__________________

Kohler - Bldg.310/315/340 Gen. #1

1002AD

1.00

__________________

Kohler - Bldg.310/315/340 Gen. #2

1002AE

1.00

__________________

Caterpiller - Bldg.320

1002AF

1.00

__________________

Cummings - Bldg.320

1002AG

1.00

__________________

Caterpiller - Bldg.330-1

1002AH

1.00

__________________

Caterpiller - Bldg.330-2

1002AJ

1.00

__________________

Caterpiller - Bldg.330-3

1002AK

1.00

__________________

Caterpiller - Bldg.330-4

1002AL

1.00

__________________

Mult-DD Diesel Engine - Bldg.330-6

1002AM

1.00

__________________

Mult-DD Diesel Engine - Bldg.330-7

1002AN

1.00

__________________

Perkins - Bldg.408 13/3/2000

1002AP

1.00

__________________

Caterpiller - Bldg.409

1002AQ

1.00

__________________

Detroit - Bldg.411/410

1002AR

1.00

__________________

Perkins - Bldg.120 5/8/2003

1002AS

1.00

__________________

Cummings - Bldg.127 1-17-2006

1002AT

1.00

__________________

Cummings - Bldg.350

1002AU

1.00

__________________

Cummings - Bldg.425

0.00

__________________

Annual Generator Load Bank Testing Contract Period: Option 2 POP Begin: 06-01-2027 POP End: 05-31-2028 PRINCIPAL NAICS CODE: 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance PRODUCT/SERVICE CODE: J030 - Maintenance, Repair, and Rebuilding of Equipment - Mechanical Power Transmission Equipment

2001AA

1.00

__________________

Caterpiller - Bldg.147

POP Begin: 06-01-2027 POP End: 05-31-2028 PRINCIPAL NAICS CODE: 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance PRODUCT/SERVICE CODE: J030 - Maintenance, Repair, and Rebuilding of Equipment - Mechanical Power Transmission Equipment

2001AB

1.00

__________________

Detroit - Bldg.302

2001AC

1.00

__________________

Kohler - Bldg.310/315/340 Gen. #1

2001AD

1.00

__________________

Kohler - Bldg.310/315/340 Gen. #2

2001AE

1.00

__________________

Caterpiller - Bldg.320

2001AF

1.00

__________________

Cummings - Bldg.320

2001AG

1.00

__________________

Caterpiller - Bldg.330-1

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated May 12, 2025.