36C25021B0072 - Amd 3.pdf

5. PROJECT NUMBER (if applicable)

CODE 7. ADMINISTERED BY

2. AMENDMENT/MODIFICATION NUMBER

CODE

6. ISSUED BY

8. NAME AND ADDRESS OF CONTRACTOR

4. REQUISITION/PURCHASE REQ. NUMBER 3. EFFECTIVE DATE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED

PAGE OF PAGES

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED

BPA NO. 1. CONTRACT ID CODE

FACILITY CODE CODE

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

E. IMPORTANT:

is extended,

(a) By completing Items 8 and 15, and returning __________ copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY is not extended.

12. ACCOUNTING AND APPROPRIATION DATA

(REV. 11/2016)

is required to sign this document and return ___________ copies to the issuing office. is not, A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

15C. DATE SIGNED

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER

Contractor

16C. DATE SIGNED

14. DESCRIPTION OF AMENDMENT/MODIFICATION

16B. UNITED STATES OF AMERICA

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER 16A. NAME AND TITLE OF CONTRACTING OFFICER

15B. CONTRACTOR/OFFEROR

STANDARD FORM 30 PREVIOUS EDITION NOT USABLE

Prescribed by GSA - FAR (48 CFR) 53.243

(Type or print) (Type or print)

(Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

(Number, street, county, State and ZIP Code)

(If other than Item 6)

(Specify type of modification and authority)

(such as changes in paying office, appropriation date, etc.)

(If required)

(SEE ITEM 11)

(SEE ITEM 13)

(X)

CHECK

ONE

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

(Signature of person authorized to sign) (Signature of Contracting Officer)

1 17

08-29-2022

541-21-104

36C250

Department of Veterans Affairs Network Contracting Office (NCO) 10 VA Healthcare System 2780 Airport Dr, Suite 340 Columbus OH 43219

36C250

Department of Veterans Affairs Network Contracting Office (NCO) 10 VA Healthcare System 2780 Airport Dr, Suite 340 Columbus OH 43219

To all Offerors/Bidders 36C25021B0072

08-01-2022 X

X X

X 01

The purpose of this solicitation amendment is to notify all potential bidders that the pre-award RFI (requests for information) & their responses are attached to this amendment & can be found in this amendment's continuation pages.

Documents supporting the RFI answers can also be located in this amendment's continuation pages.

All other terms & conditions remain unchanged & in full effect.

Brian S. Kish Contracting Officer

CONTINUATION PAGE

Please see the next page.

CONTINUATION PAGES

RENOVATE SLEEP & HOME OXYGEN AREAS FOR THE LOUIS STOKES VETERANS

AFFAIRS MEDICAL CENTER (VAMC)—CLEVELAND, OH

PROJECT NUMBER: 541-21-104

QUESTIONS AND RESPONSES TO INVITATION FOR BID (IFB) NUMBER

36C25021B0072

IFB AMENDMENT NUMBER 0003

1. QUESTION – Ref spec 02 82 13.13, PART 2.3- Is the general contractor or the VA responsible to pay for services of the VPIH? With the services of the CPIH being a requirement paid for by the abatement contractor the VPIH is typically hired and paid for by the VA or the general contractor. Will clarification be provided?

Response: Per spec 02 82 13.13, PART 2.3, A, 2 the Contractor is responsible for hiring the VPIH/ CIH.

2. QUESTION – Could more detail be provided for the Sleep Lab Cameras & Duress Buttons be provided?

Response: Please see attached documents 22-0826 Sleep and Home Oxygen Areas – ADDENDUM 02 Letter, and 22-8026 Sleep and Home Oxygen Areas - Addendum 02 Drawings.

3. QUESTION – Cameras: We see the use of discontinued Axis PTZ cameras in the Sleep Labs we can use the replacement model camera for new installations on the project, but the Hospital Viewing/Control software and hardware are not detailed or available for inspection during the Pre-Bid walk through today. How do the Hospital staff control the cameras? How is the video is stored? How is playback of Live & Recorded video is achieved?

Response: Please see attached documents 22-0826 Sleep and Home Oxygen Areas –

4. QUESTION - Panic/Duress Buttons: We see the use of STI wall mounted panic/duress buttons being used in the Sleep Labs, the question is are these currently and in the future monitored by the VA Police Dept.? If the duress buttons are monitored differentially can you please detail the hardware involved?

Response: Please see attached documents 22-0826 Sleep and Home Oxygen Areas –

5. QUESTION – The QS-1, Synthetic Quartz Arlington Q1005 has been discontinued as of 4/22/2020. How would you like me to proceed?

Response: Please see the attached documents: 22-0822 Sleep and Home Oxygen Areas – ADDENDUM 01 Letter and 22-8022 Sleep and Home Oxygen Areas – Addendum 01 drawings.

6. QUESTION – As discussed at today’s site visit – we are requesting the RFI due date to be extended to allow RFIs to be submitted following the site visit. Please advise.

Response: The RFI due date was extended to 08-24-2022

7. QUESTION – The cut-off date for RFI’s is 08/19/2022 at 3:00 pm. With the site visit 08/19/22 it does not give us and subs time to review and ask questions. Can it be extended two weeks?

Response: Please see the answer to question 6.

8. QUESTION - My name is Zach Brzezinski and I am with Concierge Business Solutions. We have been working on a bid proposal for the project mentioned above, and am hoping that you could either post or send me the site visit sign-in sheet. Being based out of Georgia, it would be greatly helpful for finding subcontractors to get in contact with. Thank you for your time.

Response: Thank you for your interest. The site visit sign in sheet was posted.

400 Western Reserve Building Fax 216.687.1558 1468 West 9th Street Cleveland, Ohio 44113 Phone 216.687.1555

Addendum #1

ISSUE DATE: 8.22.2022

PROJECT: Renovate Sleep and Home Oxygen Areas Proj. #541-21-104 Louis Stokes VA Medical Center Cleveland, Ohio

The following August 22, 2022 Addendum #1 is being made to supplement the original Bid Issue Submission specifications and drawings prepared by Kaczmar architects incorporated dated

05.20.2022 for the above referenced Project. The intent of the issuance of Addendum #1 is to more clearly identify, amend, clarify and/or provide prospective bidders additional information relative to the work prior to the bid due date. The sections and/or paragraphs listed below supersede the original publication and any previously issued addenda in their entirety.

Architectural

1. Sheet AS-702 – Finish Schedule

a. Synthetic Quartz QS-1 has been changed to Wilsonart Haldi Q40320.

If you require any further information or have any questions, please feel free to contact our office.

Cordially, KACZMAR ARCHITECTS INCORPORATED

Richard L. Yanusaitis, RA cc: Project Team Attachments: Addendum #1 Letter 22-0822 Renovate Sleep and Home Oxygen Areas – Addendum 1 Drawings

File: K:\VA CLEVELAND\SLEEP & HOME OXYGEN RENOVATION\PLOT\22-0825 ADDENDUM 01\22-0822 ADDENDUM 1 - ARCH Letter.docx

1. ALL FINISH MATERIALS SHALL BE INSTALLED PER MANUFACTURER'S DIRECTIONS.

2. SUBMIT ALL SAMPLES FOR ARCHITECT'S APPROVAL. REFER TO MATERIAL SPECIFICATIONS FOR

REQUIREMENTS.

3. REFER TO FINISH SCHEDULE FOR ALL ABBREVIATIONS AND MATERIAL SPECS. REFER TO FINISH PLAN FOR

ADDITIONAL MATERIAL/COLOR LOCATIONS.

4. ANY SPECIFIC BRAND NAMES LISTED, OR ITEMS NOTED AS "BASIS OF DESIGN," ARE INTENDED TO INDICATE THE QUANTITY, STYLE, AND/OR GENERAL APPEARANCE FOR A SPECIFIC PRODUCT, AND ARE NOT INTENDED TO INDICATE SOLE SOURCING OF THAT PRODUCT. CONTRACTOR MAY USE PRODUCTS FROM OTHER MANUFACTURERS THAT ARE EQUIVALENT IN STYLE, QUALITY, AND APPEARANCE TO THOSE LISTED.

SUBSTITUTIONS MUST BE SUBMITTED TO VA INTERIOR DESIGNER AND ARCHITECT OF RECORD FOR

APPROVAL PRIOR TO ORDERING SUCH MATERIALS.

5. CONTRACTOR RESPONSIBLE FOR APPROPRIATE TRANSITION STRIPS AT CENTERLINE OF DOOR THRESHOLD

OR AS DELINEATED ON FINISH PLAN WHEREVER THERE IS A CHANGE IN FLOOR MATERIAL.

6. REFER TO REFLECTED CEILING PLAN FOR ADDITIONAL CEILING INFORMATION.

7. ALL OUTSIDE CORNERS OF QUARTZ OR SOLID SURFACE COUNTERTOPS SHALL RECEIVE 3/4" RADIUS.

8. CONTRACTOR TO PROVIDE SOLID FIRE RETARDANT TREATED WOOD BLOCKING IN STUD SPACE AND

PROVIDE ANCHORS THROUGH GYPSUM WALLBOARD AND WOOD BLOCKING. PLASTIC HANGERS AND

INSERTS TO BE AVOIDED.

9. ALL MILLWORK TO BE CONSTRUCTED OF 3/4" PLASTIC LAMINATE MATERIAL AS INDICATED IN SECTIONS, UNLESS NOTED OTHERWISE.

10. FASTENERS FOR KNEE BRACE SUPPORTS ARE TO BE FINISHED CHROME HEADED SCREWS.

11. DRAWER CONSTRUCTION, MATERIALS, AND JOINERY IS TO BE PREMIUM GRADE PER AWI STANDARDS.

12. ALL SURFACES, INCLUDING THOSE CONCEALED AFTER INSTALLATION, ARE TO BE FINISHED PER

SPECIFICATION. MIN. BACKER BK-20.

13. ALL CABINETS WITH DOORS SHALL RECEIVE CYLINDER LOCKS AT EACH DOOR LEAF. COORD. REQUIRED

KEYING W/VA.

14. EXPOSED WALL CLEATS ARE TO BE PAINTED FINISH. AT WORK SURFACES PROVIDE BEVELED CUT AND

HOLD BACK MIN. 4" FROM LEADING EDGE OF WORK SURFACE.

15. 1" OVERHANG TYPICAL @ COUNTERTOPS WITH BASE CABINETS BELOW UNLESS NOTED OTHERWISE.

16. SCRIBES AT CABINET BODY ARE TO BE FLUSH WITH BODY. SCRIBES/FILLERS AT DOORS AND DRAWER

FRONTS ARE TO BE FLUSH WITH DOOR OR DRAWER FRONTS.

17. DRAWERS ARE TO BE FULL-DEPTH OF COUNTER U.N.O.

18. ALL CABINET INTERIORS ARE TO BE PER SPECIFICATIONS. HPDL GP-28 (VERTICAL GRADE LAMINATE).

19. ALL COUNTERTOPS SHALL BE INSTALLED UPON MIN. 3/4" PLYWOOD SUBSTRATE.

20. REFER TO SPECIFICATIONS FOR HARDWARE GUIDELINES AND STANDARDS.

21. CONTRACTOR TO COORDINATE POWER/CABLE OUTLET LOCATIONS WITH VA-PROVIDED TV'S IN FIELD WHERE

APPLICABLE, TYP.

22. GROMMET LOCATIONS SHALL BE PROVIDED/DRILLED BY GC IN FIELD, AND FINAL LOCATIONS SHALL BE COORDINATED WITH VA. CONTRACTOR SHALL FIGURE MIN. (2) GROMMETS PER INDIVIDUAL COUNTERTOP, AND (3) SHALL BE FIGURED WHERE (3) CHAIRS ARE SHOWN IN PLAN.

23. FINISHED END PANELS SHALL BE PROVIDED AT ALL EXPOSED ENDS OF CABINETRY AND SOFFITS ABOVE.

24. FINISHED FILLER STRIPS SHALL BE PROVIDED AT ALL CABINETRY AS REQUIRED BASED ON FIELD

DIMENSIONS.

25. FLOORING MATERIALS THAT ARE TO BE PLACED ON EXISTING FLOOR SLABS SHALL HAVE THE FLOOR SLAB ADEQUATELY PREPPED PER FOR THE FLOORING MATERIAL REQUIREMENTS. ALL FINISH MATERIALS SHALL

BE INSTALLED PER MANUFACTURER'S DIRECTIONS.

FINISH & CASEWORK NOTES:

PAINT NOTES:

1. STANDARD WALL FINISH SHALL BE SATIN OR EGGSHEL SHEEN.

2. ALL METAL TRIM ITEMS TO BE PAINTED (E.G. DOOR FRAMES, LOUVERS, ETC.) SHALL RECEIVE SEMI-GLOSS

SHEEN AND SHALL MATCH THE COLOR OF THE WALL IN WHICH THEY ARE INSTALLED.

3. CEILING SHALL RECEIVE FLAT PAINT FINISH. SEE FINISH SCHEDULE.

FLOORING/BASE NOTES:

1. EXISTING VINYL FLOORING IN MAIN CORRIDORS IS 5 MM THICK, EQUAL TO NEW FLOORING IN PROJECT AREAS. CONTRACTOR SHALL ENSURE THAT SEAM @ DOOR THRESHOLDS IS FULLY WELDED AND FLUSH

BETWEEN NEW AND EXISTING SPACES. NO TRANSITION STRIPS SHALL BE REQUIRED.

2. ORIENTATION OF LONG DIRECTION OF LVT TILE INDICATED BY SYMBOL:

3. BASE MATERIAL SHALL BE PROVIDED BELOW ALL CABINET UNIT HEATERS @ EXTERIOR WALLS/WINDOWS

4. ALL TILE FLOOR IN BATHROOMS SHALL BE SLOPED TO DRAIN. HIGH POINT CREATED AT BATHROOM ENTRY DOOR SHALL TRANSITION CLEANLY INTO ADJACENT BEDROOM WITH A TRANSITION STRIP @ DOOR THRESHOLD AND/OR EXTENSION OF FLOOR LEVELING COMPOUND IN BEDROOM. COORDINATE FINAL

REQUIREMENT IN FIELD. REFER TO SPEC SECTION 09 30 13 FOR SLOPING REQUIREMENTS

1"

HR-1 & CR-1WALL PANELING

CORNER GUARD

WALL PANELING

WALL PANELING SHALL

RUN BEHIND ALL

CORNER GUARDS

WALL TILE, SEE INT.

ELEVATIONS

EXTEND WATERPROOF

BARRIER (HEAVY DASHED

LINE) TO CEILING

SCHLUTER (OR EQUAL) COVE

MOULDING - SB-1

FLOOR TILE

MOLD/MILDEW

RESISTANT GYP. BD.

WATERPROOF BARRIER TO

BE PROVIDED BELOW TILE IN

ENTIRETY OF BATHROOM

FLOOR

FLOOR DRAIN, SEE PLAN.

ENSURE ALL DRAINS ARE NOT

CORED THROUGH EXISTING

CONCRETE BEAMS. ALL TILE IN

ROOM SHALL BE SLOPED TO

DRAIN LOCATION

SLOPE

SEE DRAIN DETAIL ON

P-601. CLAMP

WATERPROOFING

MEMBRANE INSIDE OF

DRAIN BODY

NOTE: HIGH POINT CREATED AT

BATHROOM ENTRY DOOR SHALL

TRANSITION CLEANLY INTO

ADJACENT BEDROOM WITH A

TRANSITION STRIP @ DOOR

THRESHOLD AND/OR EXTENSION OF

FLOOR LEVELING COMPOUND IN

BEDROOM. COORDINATE FINAL

REQUIREMENT IN FIELD.

CRASH RAIL - CR-1.

PROVIDE IN-WALL

BLOCKING AS

REQ'D. FOR

ANCHORAGE, TYP.

HAND RAIL - HR-1

(HR-2 MAY OCCUR).

PROVIDE IN-WALL

BLOCKING AS

REQ'D. FOR

ANCHORAGE, TYP.

V

IF

V

IF

VERIFY MOUNTING

HEIGHTS IN FIELD -

ALIGN W/EXISTING

RAILS

BASE MAT'L

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved: NICK CARROZZA

VA FORM 08 - 6231

A

FULLY SPRINKLERED

Louis Stokes Cleveland

VA Medical Center

U.S. Department of Veterans Affairs

B

C

D

E

F

A

B

C

D

E

F

21 4 5 6 7 8 9 10

Phase

ARCHITECT OF RECORD STAMPCONSULTANTS

321 4 5 6 7 8 9 10

E T

G

DE

I

RET

S

HCRA

I

KACZMAR

STANLEY

NO. 4988

T

E R

S

ATE

I

T C

J.

O

O

FO

H

1468 WEST 9TH STREET #400

CLEVELAND, OH 44113

P. 216.687.1555 F. 216.687.1558

MECHANICAL/TECH. ENGINEERING:

HEAPY

THE HANNA BUILDING

1422 EUCLID AVE. STE. 1162

CLEVELAND, OH 44115

P. 216.862.5846

COST ESTIMATING:

MCGUINESS UNLIMITED, INC.

15724 STILLWOOD AVE.

CLEVELAND, OH 44111

P. 440.667.5120

ELECTRICAL ENGINEERING:

FFE, INC.

110 BOGGS LN, SUITE 170

SPRINGDALE, OH 45246

P. 513.522.0956

HAZ. MATERIALS

ASSESSMENT:

STEPHEN J. SEBESTA &

ASSOC., INC.

30628 DETROIT RD. #258

WESTLAKE, OH 44145

P. 216.781.0060

STRUCTURAL ENGINEERING:

THORSON BAKER & ASSOC.

3030 WEST STREETSBORO RD.

RICHFIELD, OH 44286

P. 330.659.6688

BID ISSUE SUBMISSION

k a c z s v r\ a c ti v e \V

A C

L E

V E

L A

N D

\S L

E E

P

H O

M E

O X

Y G

E N

R E

N O

V A

T

IO

N \R

E V

IT

\V

A M

P

S le e p

L a b

H o m e O x y g e n

R

.r v t

/2

/2

:5

:5

P

M

AS-702

FINISH SCHEDULE RENOVATE SLEEP AND HOME

OXYGEN AREAS

10701 EAST BLVD. CLEVELAND, OHIO

541-21-104

5.20.22 CJK DAK

3" = 1'-0"

TYP. HANDRAIL @ DOOR FRAME

3" = 1'-0"

TYP. WALL PANEL/CORNER GUARD

6" = 1'-0"

TYP. BATHROOM COVE

BASE/WATERPROOFING DETAIL

1 1/2" = 1'-0"

TYPICAL HAND/CRASH RAIL

Revisions: Date:

SCHEMATIC DESIGN 9.2.20

DESIGN DEVELOPMENT 11.13.20

65% CDs SUBMISSION 3.26.21

100% CDs SUBMISSION 5.5.21

FINAL CDs SUBMISSION 5.28.21

BID ISSUE SUBMISSION 5.20.2022

ADDENDUM 01 08.22.2022

Rich Line

Rich Line

400 Western Reserve Building Fax 216.687.1558 1468 West 9th Street Cleveland, Ohio 44113 Phone 216.687.1555

Addendum #2

ISSUE DATE: 8.26.2022

PROJECT: Renovate Sleep and Home Oxygen Areas Proj. #541-21-104 Louis Stokes VA Medical Center Cleveland, Ohio

The following August 26, 2022 Addendum #2 is being made to supplement the original Bid Issue Submission specifications and drawings prepared by Kaczmar architects incorporated dated

05.20.2022 for the above referenced Project. The intent of the issuance of Addendum #2 is to more clearly identify, amend, clarify and/or provide prospective bidders additional information relative to the work prior to the bid due date. The sections and/or paragraphs listed below supersede the original publication and any previously issued addenda in their entirety.

This Addendum 02 is being issued to respond to several questions asked after the pre-bid walk-through.

Question 1:

Could more detail be provided for the Sleep Lab Cameras and Duress Buttons provided?

Response 1:

Yes. See responses below and attached product data.

Question 2:

Cameras: We see the use of discontinued Axis PTZ cameras in the Sleep Labs we can use the replacement model camera for new installations on the project, but the Hospital Viewing/Control software and hardware are not detailed or available for inspection during the Pre-Bid walk through today. How do the Hospital staff control the cameras? How is the video is stored? How is playback of Live & Recorded video is achieved?

Response 2:

The cameras in each of the Sleep Labs that connect to the adjacent Control Room, those cameras will be furnished and installed by the VA, and the conduit and backbox will be furnished and installed by the Electrical Subcontractor. The hospital software and hardware will be by the VA.

Question 3:

Panic/Duress Buttons: We see the use of STI wall mounted panic/duress buttons being used in the Sleep Labs, the question is are these currently and, in the future, monitored by the VA Police Dept.? If the duress buttons are monitored differentially, can you please detail the hardware involved?

Response 3:

All panic/duress buttons are tied into the Lenel Security System and monitored by VA Police.

The following types of panic duress buttons are based on the locations.

a. Under-counter / desk: Potter, HUB-T. See attached product data.

b. Wall-mounted: STI (Safety Technology International). See attached product data.

Page - 2 – VA Renovate Sleep and Home Oxygen Areas - Addendum #2 – 08.26.2022

Revised Drawings:

Technology

1. Sheet T-001 – Legend, Notes, and Index of Drawings

a. Symbol for Sleep Lab Camera has been revised to “SC”.

b. “SC” note states “Sleep Lab closed system camera. Provide Rough-in and Cabling.

Coordinate with Owner for exact location and cable routing requirements.

2. Sheet T-102 – Partial Second Floor Technology Plan

a. Sleep Lab Camera symbols have been revised to “SC”, and are indicated in the four

(4) Sleep Lab Rooms (Rooms 2B131, 2B132, 2B134, & 2B135-2).

b. Wall-mounted Panic Duress Buttons are indicated in the four (4) Sleep Lab Rooms.

See attached product data for under-counter / desk, & wall-mounted buttons. Exact model number of Panic Duress Button is to be verified with the VA.

If you require any further information or have any questions, please feel free to contact our office.

Cordially, KACZMAR ARCHITECTS INCORPORATED

Richard L. Yanusaitis, RA, LEED AP BD+C, CDT cc: Project Team Attachments: Addendum #2 Letter 22-0822 Renovate Sleep and Home Oxygen Areas – Addendum 1 Drawings Undercounter/desk panic duress button Wall-mounted panic duress button

File: K:\VA CLEVELAND\SLEEP & HOME OXYGEN RENOVATION\PLOT\22-0826 ADDENDUM 02\22-0826 Sleep and Home Oxygen Areas - ADDENDUM 02 Letter.docx

MKT #8900085 - REV L

8/02

PRINTED IN USA PAGE 1 OF 2

HUB-T

HOLD-UP BUTTON

UL & CUL Listed Dimensions: 2 1/16"W x 3 7/16"L x 1 1/4"H 52,4 cm W x 87,3 cm L x 2,7 cm H Weight: 2.4 oz.

68,0 g.

Switch Rating: 3 Amps at 28V DC/AC .05 Amp at 125V DC Resistive Enclosure: ABS Plastic Temperature Range: 32°F to 140°F (85% maximum humidity) Environmental Limitations: Not recommended for outdoor use or use in coolers or freezers.

Stock No. 2020132

The HUB-T Series Hold-Up Buttons provide two sets of momentary or latching DPDT contacts for actuating surveillance cameras or other security applications, in addition to the hold-up signal. The two sets of contacts may be used independently of each other, or they may be wired in series with a jumper wire for additional protection against false alarms. See illustration on page 2.

Installation Install in accordance with UL 681. Devices should be installed so they cannot be observed by the public and so they can be operated inconspicuously. At least one shall be installed in each vault open during business hours. In banks they shall also be installed in offi ces commanding a view of the public space.

BREAK OUT FOR SURFACE

MOUNT WIRING ADD JUMPER WIRE

WIRE EXIT

AREA

WIRE EXIT

AREA

BREAK OUT FOR

SURFACE MOUNT WIRING

DWG# 996-1

HUB-T (Shown without cover)

Potter Electric Signal Company • 2081 Craig Road, St. Louis, MO, 63146-4161 • Phone: 800-325-3936/Canada 888-882-1833 • www.pottersignal.com

LATCHING CAP LATCHING RAMP

DWG# 996-6

Converting The HUB-T To Optional Latching Operation Remove the installed button caps and discard. Replace with alternate latching caps (supplied). Align the cap such that the latching mechanism is directly over the latching ramp in the base.

See illustration at right.

HUB-T (Shown with cover) To unlatch the HUB-T, insert the reset key, provided with the HUB-T, between the switch cap and the base. The unit unlatches when the cap is released.

Rich Text Box under-counter / desk

Normally Open Hold-up Circuit With EOL Supervision Normally Closed Hold-up Circuit With EOL Supervision

Electrical interlock requires both buttons to be activated simultaneously before alarm will occur. Any single button will activate camera.

Note: Jumpers required

PRINTED IN USA

HUB-T

HOLD-UP BUTTON

MKT #8900085 - REV L

8/02

TO CAMERA

TRIGGER

DWG# 997-1 TO HOLD-UP ZONE

BREAK OUT FOR SURFACE

MOUNT WIRING

WIRE EXIT

AREA

TO CAMERA

TRIGGER

TO HOLD-UP ZONE

HUB-T (Shown without cover)

Stopper® Stations

MODEL NUMBER: SS2432EM-EN

Build these North American style, ADA Compliant, multipurpose push button switches to your specifications. Unique, patented design helps dramatically stop accidental activation.

Available in six colors, several button activation choices, with or without a protective cover and in any language to accommodate most applications. Part numbers may vary when ordering between the US and UK offices.

Below represents US part numbers.

Contact sales by email or phone.

sales@sti-usa.com 248-673-9898 mailto:sales@sti-usa.com?subject=SS part number confirmation mailto:sales@sti-emea.com?subject=SS part number confirmation Rich Text Box Model number to be verified with VA

BUTTONS AND SWITCHES

For more information, call 248-673-9898 or visit www.sti-usa.com

STI STOPPER®

STATION SERIES

ADA

Compliant

ADA

Compliant

See Inside For Details

PRODUCT OVERVIEW

These ADA Compliant, multipurpose push button switches cover a wide range of applications both indoors and outdoors. They’re called Stopper Stations. They incorporate a unique, patented design that helps dramatically to stop accidental activation. A number of standard models are available or we can create custom units to meet your needs exactly. You have your choice of any of six universal shell colors, several button styles, standard or custom wording and language.

HOW THEY WORK

Because of their superior, patented design combined with quality construction throughout, you can expect outstanding performance for years to come. In fact, many STI customers are surprised to find that all this quality is available at no increase in price.

Plus, customers appreciate the option to protect the switches with STI protective covers that carry a three year guarantee against breakage in normal use, one year on electro mechanical and electronic components. For indoor applications, you can order your Stopper Station with a pre-alarm cover to help stop malicious and accidental activation.

General Information

· Multipurpose push button switches cover a wide range of applications both indoors and outdoors.

· Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components).

Design

· Unique, curved design helps protect against accidental activation.

Construction

· Station housing molded of tough polycarbonate.

· UL Listed to U.S. and Canadian safety standards.

· Momentary models used with LT-

1UL Latching Timer Module are Listed for access control.

· Stainless steel backplate.

· Push buttons are ADA Compliant

(excludes “3” key switch button).

Installation

· 5VA flammability rating on backplate and spacer.

· Typical working properties of polycarbonate are -40° to 250°F (-40° to 121°C).

Options

· Your choice of colors — red, green, yellow, white, blue or orange.

· Standard or custom text or hi-res logo.

· Custom text in any language.

· Protect with STI indoor/outdoor protective covers.

KEY FEATURES

For more information, call 248-673-9898 or visit www.sti-usa.com.

STI Stopper® Station Series Dimensions and Technical Information

UNIQUE BUTTON FEATURES

Models SS2xy0, SS2xy1, SS2xy3, SS2xy4

• Interchangeable or replaceable N.O. or N.C., SPST gold-plated contact blocks rated for 6 amps @ 600 VAC or 1 amp @ 250 VDC.

• Standard switch includes one N.O. and one N.C. contact. Holds up to three individual isolated contacts.

• SS2xy0 and SS2xy1 rated for 6000 operations.

• SS2xy4 rated for 100,000 operations.

Note: some standard single gang boxes need additional depth. To add 5/8” depth, order KIT-102722-color (B=blue, G=green, R=red, Y=yellow, W=white, E=orange).

Models SS2xy2, SS2xy5, SS2xy9

• Two (2) Form “C” contacts, DPDT, rated 10 amps @ 125/250 VAC, 1/2 HP, 6 amps @ 30 VDC.

• 12-24VAC/VDC LED (LED red, green, and white).*

• Over 100,000 operations.

Model SS2xy6

• Two (2) Form “C” contacts, DPDT, rated 10 amps @ 125/250 VAC, 1/2 HP, 6 amps @ 30 VDC.

• 12-24VAC/VDC LED.*

• 100,000 operations.

Model SS2xy7

• Two (2) Form “C” contacts, DPDT, rated 10 amps @ 125/250 VAC, 1/2 HP, 6 amps @ 30 VDC.

• Operating range -31°F to 150°F (-35°C to 66°C).

• 12-24VAC/VDC LED.*

• Weather resistant, suitable for indoor or outdoor use without a cover.

• 100,000 operations.

Model SS2xy8

• Switch rating 10 amps @ 240 VAC resistive and has a timer range:

2 - 60 seconds (± 15%).

• Indoor use only. Not recommended for outdoor/water applications, temperature range of button 15° to 120°F (-9° to +49°C).

• Timer life of over 1,000,000 operations.

• Pneumatic adjustable timer opens or closes a circuit and has a timed delay before reset. No electricity to operate.

• Ideal for security applications.

• 1 Form Z, 1 N.O. and 1 N.C. contact.

* Power supply not included

EXISTING STANDARD

SINGLE GANG BOX

STI RECOMMENDS THE

USE OF THIS SPACER

FOR SWITCH CLEARANCE

ON STANDARD SINGLE

GANG BOXES.

SEE NOTE.

.69 in.

(17mm)

BACKPLATE ASSEMBLY

NOTE: TO PROVIDE ADEQUATE CLEARANCE FOR INSTALLATION,

ONE OF THE FOLLOWING IS RECOMMENDED: SUB-102722 SPACER,

OR RACO #660 W/1/2" K.O. AND RACO #653 EXTENSION RING.

ALSO RACO #696 MASONRY BOX.

PRODUCT DIMENSIONS

3.25 in.

(82mm)

4.87 in.

(124mm)

1.62 in.

(41mm) 2.25 in.

(57mm)

SWITCH/BUTTON ACTIVATION TYPE

REFER TO CHART ON PAGE 3

SWITCH ASSEMBLY

SEE VIEW BELOW

N.O.

N.C.

COM

LAMP

SWITCH ASSEMBLY-SEE BELOW

N.O./N.C.

TERMINAL BLOCKS.

(1 OF EACH PROVIDED)

UP TO 3 TERMINALS MAY

BE USED FOR EACH STATION

SWITCH INSTALLATION

SWITCH REMOVAL

ILLUMINATED BUTTON

MOMENTARY MUSHROOM

PUSH TO ACTIVATE

AND TURN TO RESET

PUSH TO ACTIVATE

AND KEY TO RE SET

KEY TO ACTIVATE

5VA FLAMMABILITY RATING

ON BACKPLATE AND SPACER

19030 KEY ONLY

SPACER

SUB-102722

NOTE: TO PROVIDE ADEQUATE CLEARANCE FOR INSTALLATION,

MAY REQUIRE: SUB-102722 SPACER, OR RACO #660

W/1/2" K.O. AND RACO #653 EXTENSION RING.

ALSO RACO #696 MASONRY BOX.

PRODUCT DIMENSIONS

3.25 in.

(82mm)

4.87 in.

(124mm)

1.62 in.

(41mm) 2.25 in.

(57mm)

SUB-102722-COLOR

STI RECOMMENDS THE USE OF THIS SPACER

FOR SWITCH CLEARANCE ON

STANDARD SINGLE GANG BOXES

FOR THE #0, #1, #3 AND #4 BUTTON AND

ADDS 5/8” TO DEPTH OF EXISTING

STANDARD SINGLE GANG BOX

.69 in.

(17mm)

BACKPLATE ASSEMBLY

5VA FLAMMABILITY RATING

ON BACKPLATE AND SPACER

EXISTING STANDARD

SINGLE GANG BOX

#8

PUSH-TO-ACTIVATE

AND KEY-TO-RESET

19030 KEY ONLY

#0

PNEUMATIC ADJUSTABLE

TIMER BUTTON

KEY-TO-ACTIVATE#3

PUSH-TO-ACTIVATE AND TURN-TO-RESET#1

MOMENTARY MUSHROOM#4

KEY-TO-RESET

MOMENTARY

TURN-TO-RESET BUTTON #9

#2 #5

EXISTING STANDARD

SINGLE GANGBOX

HOUSING INDEXING SLOTS

BACKPLATE ASSEMBLY

(SEE REVERSE SIDE)

102722 SPACER RED, GREEN,

YELLOW, WHITE AND BLUE.

STI RECOMMENDS THE USE OF THIS

SPACER FOR SWITCH CLEARANCE

ON STANDARD SINGLE GANG BOXES.

ASSIGNED A 5VA FLAMMABILITY RATING.

SEE NOTE IN PRODUCT DIMENSION VIEW.

10274 OCTAGON SHELL

RED, GREEN, YELLOW, WHITE AND BLUE

10105 MOMENTARY BUTTON (#4)* KEYS

(2) PROVIDED

10271 STATION HOUSING

RED, GREEN, YELLOW,

WHITE AND BLUE

10100 PUSH/TURN

RESET BUTTON (#1)

10104 KEY BUTTON (#3)

KEY REQUIRED TO ACTIVATE - IN

ACTIVATE MODE KEY CAN BE REMOVED

#8-32 x 3/8 in.

(1) PROVIDED

KIT-H19030 KEYS

(2) PROVIDED

10102 KEY RESET SWITCH

OCTAGON KEY RESET BUTTON (#0)

RED, GREEN, YELLOW, WHITE

AND BLUE

02050

TO PROVIDE ADEQUATE

CLEARANCE FOR INSTALLATION

STI RECOMMENDS THE USE OF

PART #102722 SPACER

OR RACO #660 WITH 1/2 in. K.O.

AND RACO #653 EXTENSION RING,

ALSO RACO #696 MASONRY BOX.

3.25 in.(82mm)

4.87 in.(124mm)

1.62 in.

(41mm)

NC

NO

2.25 in.

(57mm)

TO PROVIDE ADEQUATE

CLEARANCE FOR

INSTALLATION STI

RECOMMENDS THE USE OF

PART #102722 SPACER OR RACO #660 WITH 1/2 in. K.O.

AND RACO #653 EXTENSION RING, ALSO RACO #696 MASONRY BOX.

3.25 in.

(82mm)

4.87 in.

(124mm)

1.62 in.

(41mm)

2.25 in.

(57mm)

STRIP 1/4 in. OF WIRE INSULATION

INSERT IN TERMINAL (AS SHOWN) THEN

USING A PHILLIPS SCREWDRIVER TURN

CLOCKWISE UNTIL TIGHT.

SEPARATION OF TERMINAL ASSEMBLY.

FROM BUTTON ASSEMBLY IS AS FOLLOWS:

GRASP TERMINAL HOUSING AND USING THUMB

APPLY PRESSURE DOWNWARD, REMOVE TERMINAL.

REMOVAL OF TERMINAL BLOCK

FROM TERMINAL HOUSING: INSERT

SMALL SCREWDRIVER (AS SHOWN)

AND PRY UPWARD, REMOVE TERMINAL.

TERMINAL BLOCK

RELEASE LEVER

MUST FACE UPWARD

AS SHOWN FOR SWITCH

TO FUNCTION CORRECTLY.

ELECTRICAL TERMINAL BLOCK

UP TO 3 TERMINALS MAY BE USED

INSERT NOTCH, AS SHOWN

THEN ROTATE UPWARD

TERMINAL BLOCK 10196 NO (1) PROVIDED

10198 NC (1) PROVIDED

SEE VIEW IN DIRECTION OF ARROW

FOR CONTACT INDENTIFIER LOCATIONS

UP TO (3) TERMINALS MAY BE USED FOR EACH

STATION ASSEMBLY.

OUTGOING

INCOMING

SCREWS #6-32 x 1

OUTLET BOX (2) PROVIDED.

SCREWS #6-32 x 1.50 WHEN

USING 102722 SPACER

(SEE REVERS SIDE).

#10-32 x 3/8 in. GROUND SCREW

(1) PROVIDED

BUTTON LOCK NUT

10272 BACKPLATE

GREEN, YELLOW, WHITE AND BLUE

PUSH

A

MESSAGE

HERE

MESSAGE

HERE

MESSAGE

HERE

C O

M N

O N

C

LOW PROFILE

CONTACT SWITCH

PNEUMATIC

ADJUSTABLE

TIMER BUTTON

5/8” SPACER

KIT-102722-B (BLUE)

KIT-102722-G (GREEN)

KIT-102722-R (RED)

KIT-102722-W (WHITE)

KIT-102722-Y (YELLOW)

KIT-102722-E (ORANGE)

KIT-71100A-COLOR BACK BOX

NOT FOR USE WITH SWITCH

CONFIGURATION #0

1.58 in.

(40mm)

0.625 in.

(16mm)

CONTACT SWITCH

SS2xy8

(PNEUMATIC

ADJUSTABLE TIMER)

SS2xy2 (KEY-TO-RESET) SS2xy5 (MOMENTARY) SS2xy9 (TURN-TO-RESET)

KIT-H18061 KEYS ONLY (2)

SS2xy3 (KEY-TO-ACTIVATE)

KIT-H18062 KEYS ONLY (2)

SS2xy1 (TURN-TO-RESET) SS2xy4 (MOMENTARY MUSHROOM)

SS2xy0 (KEY-TO-RESET)

REQUIRES 2.25” MOUNTING DEPTH

INTERNAL DEPTH

1.45 in. (37mm) x = COLOR y = COVER

KIT-H19030 KEYS ONLY (2)

SS2xy6 (ILLUMINATED) SS2xy7

(WEATHER RESISTANT

ILLUMINATED)

MULTICOLOR ILLUMINATION BAR

ILLUMINATED BUTTON

(ONE COLOR)

CONTACT SWITCH

PUSH

PUSH

PUSH

PUSH

EXISTING STANDARD GANG BOX

NOTE: USE SPACER SUB-102722

WITH #0, #1, #3, #4 AND

#7 BUTTON TYPE

.69 in.

(17mm)

BACKPLATE ASSEMBLY

SWITCH/BUTTON ACTIVATION TYPE

REFER TO CHART ON PAGE 4

5VA FLAMMABILITY RATING

ON BACKPLATE AND SPACER

SPACER

SUB-102722

#8

PUSH-TO-ACTIVATE

KEY-TO-RESET

19030 KEY ONLY

#0

ILLUMINATED

WEATHER RESISTANT

#7

PNEUMATIC

ADJUSTABLE

TIMER BUTTON

KEY-TO-ACTIVATE#3

PUSH-TO-ACTIVATE

TURN-TO-RESET

#1

MOMENTARY MUSHROOM#4

KEY-TO-RESET

MOMENTARY

TURN-TO-RESET BUTTON #9

#2 #5

MESSAGE

HERE

EXISTING STANDARD GANG BOX

NOTE: USE SPACER SUB-102722

WITH #0, #1, #3, #4 AND

#7 BUTTON TYPE

.69 in.

(17mm)

BACKPLATE ASSEMBLY

5VA FLAMMABILITY RATING

ON BACKPLATE AND SPACER

SPACER

SUB-102722

PUSH-TO-ACTIVATE

KEY-TO-RESET

19030 KEY ONLY#0

PUSH-TO-ACTIVATE

TURN-TO-RESET

#1

MOMENTARY MUSHROOM#4

KEY-TO-ACTIVATE#3

#8 PNEUMATIC

ADJUSTABLE

TIMER BUTTON

KEY-TO-RESET

MOMENTARY

TURN-TO-RESET BUTTON #9

#2 #5

MESSAGE

HERE

PUSH

ILLUMINATED

WEATHER RESISTANT

#7

For more information, call 248-673-9898 or visit www.sti-usa.com.

STI Stopper® Station Series Dimensions and Technical Information

Stopper® Station Shield (Cover 2, A)

This inexpensive and highly durable cover, with or without alarm, was invented to mount directly onto the Stopper Station series of buttons with two tabs that snap into the Stopper Station shell. It takes hard knocks in stride while protecting the button against vandalism, damage and accidental activation. Ideal for use when space is limited.

No labeling can be placed on the Stopper Station shield.

Universal Stopper® (Covers 3, 4, 7, 8)

This indoor/outdoor cover helps stop false fire alarms and can protect Stopper Stations against damage as well as malicious or accidental activation. It consists of a clear polycarbonate shield that fits easily over any STI Stopper Station model. When it is lifted to gain access to the Stopper Station, the optional piercing 105 dB warning horn sounds. Legitimate activation is not affected. The protective cover options include: dome or low profile, with or without horn, flush mount, surface mount.

Additional labeling may be placed on the Universal

Note:

Stopper Station #7 button is UL/cUL Listed for outdoor use without a cover. All others are approved for outdoor use with an outdoor rated protective cover. Excludes pneumatic button.

APPROVALS & WARRANTY

TESTING

It has been tested and approved or listed by:

WARRANTY

Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components).

Accessories LT-1UL UL Latching/Timer Module KIT-71100A-* Back box for 2, 5, 6, 7, 8 and 9 switch KIT-71101A-* Back box & Spacer Kit for 1, 3 or 4 switch KIT-E10196 N.O. contact for 0, 1, 3 or 4 switch KIT-M10197H Replacement contact holder for 0, 1, 3 & 4 switch KIT-E10198 N.C. contact for 0, 1, 3 or 4 switch KIT-102720-* Stackable 10mm Spacer, European and US Mounting KIT-102722-* Plastic Spacer - adds 5/8” depth KIT-H19030 Two Extra Keys for 0 switch KIT-H18061 Two Extra Keys for 2 switch KIT-H18062 Two Extra Keys for 3 switch KIT-E10197H Pack of two contact switch holders, one N.O. and one

N.C. for 0, 1, 3 or 4 switch

* R=red, B=blue, G=green, Y=yellow, W=white, E=orange

3.18 (81mm)

1.62 (41mm)

3.25 (82mm)

4.8

(1 mm

PNEUMATIC OPERATED TIMER, OPENS

OR CLOSES CIRCUIT AFTER TIME DELAY.

NO ELECTRICITY TO OPERATE

10 AMP, FOR C CONTACTS

IDEAL FOR SECURITY APPLICATIONS

CORROSION RESISTANT BODY

ADJSTABLE TIME RANGE

PRODUCT DIMENSIONS

CAN BE INSTALLED ON ANY

EXISTING SINGLE GANG BOX

FAST

SLOW

TIME RANGE ADJUSTMENT SCREW

TURN COUNTER CLOCKWISE TO

INCREASE TIMER SPEED.

ADJUSTMENT RANGE - 2 TO 60 SECONDS

FACTORY SETTING - 25 TO 45 SECONDS

SWITCH DATA

RESOLUTION: 2 TO 60 SECONDS

ACCURACY: 10% REPEAT ACCURACY

POWER: NONE TO OPERATE, SWITCHES

UP TO 10 AMPS @ 240 VOLTS

RESET: AT CYCLE END

LIFE CYCLES: 1,000,000

NC

NO

PNEUMATIC TIMER

SWITCH ASSEMBLY

FAST

SLOW

NC

NO

PNEUMATIC TIMER

SWITCH ASSEMBLY

BACKPLATE WITH MOLDED-IN

STAINLESS STEEL INSERT

SWITCH HOUSING MOLDED OF

POLYCARBONATE. CHOOSE RED,

GREEN, YELLOW, WHITE OR BLUE.

ALLEN HEAD

LOCKING SCREW

AND WRENCH

ALSO CAN BE INSTALLED ON ANY

EXISTING SINGLE GANG BOX

BUTTON AND SWITCH ASSEMBLY

19015 WRENCH

(1) PROVIDED

FIGURE C

SURFACE BOX

INSTALLATION

19011 SCREW ALLEN HEAD

#8-32 x 3/8 (1) PROVIDED

10271 SWITCH HOUSING

RED, GREEN, YELLOW,

WHITE AND BLUE

1.62 in.

(41mm)3.25 in. (82mm)

4.8 7 i n.

(1 mm

PRODUCT DIMENSIONS

1.58 in.

(40mm)

1.375 in.

(35mm)

1.62 in.

(41mm)

3.25 in.(82mm)

4.87 in.

(124mm)

PRODUCT DIMENSIONS

1.56 in.

(40mm)

"A"

TO PROVIDE ADEQUATE CLEARANCE FOR CONTACTS,

(#0, #1, #3, #4) INSTALLATION

1.62 in.

(41mm)

3.25 in.(82mm)

4.87 in.

(124mm)

1.58 in.

(40mm)

"A"

GROUND SCREW

BUTTON AND SWITCH ASSEMBLY

SCREW #6-32 x 1 in.

(2) PROVIDED

SCREW #6 x 1-1/4 in.

(4) PROVIDED

KIT-71100A-COLOR SURFACE BOX

ANCHOR

(4) PROVIDED

DRILL (4) 3/16 in.

DIA HOLES

J

J

J

J

H SWITCH BACKPLATE

MOUNTING HOLES

BOX MUST BE INSTALLED WITH

ARROWS POINTING UPWARD

THESE HOLES MUST BE

DRILLED OUT USING A

5/32 in. DRILL BIT

H

DRILL POINT LOCATIONS PROVIDED

TOP AND BOTTOM FOR 1/2 in.

CONDUIT FITTINGS.

DRILL AS NEEDED

DRILL POINT LOCATIONS PROVIDED

TOP AND BOTTOM FOR 1/2 in.

CONDUIT FITTINGS.

DRILL AS NEEDED

KIT-71100A BOX (SURFACE MOUNT)

RED, GREEN, YELLOW, WHITE AND BLUE

19039 SCREW #6 x 1-1/4 in.

(4) PROVIDED

PNEUMATIC TIMER MODEL

WITH PROVIDED

SURFACE BACKBOX

19060 SCREW #6-32 x 1 in.

(2) PROVIDED

BUTTON AND SWITCH ASSEMBLY

19021 GROUND SCREW

19018 ANCHOR

(4) PROVIDED

THIS VIEW FOR PAGE 6

DRILL (4)

3/16 DIA. HOLES

DRILL POINT LOCATIONS PROVIDED

TOP AND BOTTOM FOR 1/2 in.

CONDUIT FITTINGS.

DRILL AS NEEDED

KIT-71100A BOX (SURFACE MOUNT)

RED, GREEN, YELLOW, WHITE AND BLUE

SCREW #6 x 1-1/4 in.

(4) PROVIDED

PNEUMATIC TIMER MODEL

WITH PROVIDED

SURFACE BACKBOX

SCREW #6-32 x 1 in.

(2) PROVIDED

BUTTON AND SWITCH ASSEMBLY

GROUND SCREW

ANCHOR

(4) PROVIDED

THIS VIEW FOR PAGE 6

DRILL (4)

3/16 DIA. HOLESBACKPLATE WITH MOLDED-IN

STAINLESS STEEL INSERT

SWITCH HOUSING MOLDED

OF POLYCARBONATE. CHOOSE

RED, GREEN, YELLOW,

WHITE OR BLUE.

ALLEN HEAD

LOCKING SCREW

AND WRENCH

DRILL POINT LOCATIONS PROVIDED

TOP AND BOTTOM FOR 1/2 in.

CONDUIT FITTINGS.

DRILL AS NEEDED

KIT-71100A BOX (SURFACE MOUNT)

RED, GREEN, YELLOW, WHITE AND BLUE

19039 SCREW #6 x 1-1/4 in.

(4) PROVIDED

PNEUMATIC TIMER MODEL

WITH PROVIDED

SURFACE BACKBOX

19060 SCREW #6-32 x 1 in.

(2) PROVIDED

19021

GROUND SCREW

19018 ANCHOR

(4) PROVIDED

DRILL (4)

3/16 DIA. HOLES

.728 in.

(18.49mm)

2.4 in.

(60.96mm)

3.218 in.

(81.74mm)

4.132 in.

(104.95mm)

4.83 in.

(122.68mm)

1.578 in.

(40.08mm)

Covers to protect your STI Stopper Station from damage or weather and to help stop malicious or accidental activation.

“A” - Contact Depth SS2xy0* 2.16” SS2xy1 2.04” SS2xy2 1.00” SS2xy3* 2.13” SS2xy4 2.04” SS2xy5 1.00” SS2xy6 .875” SS2xy7 .875” SS2xy8 1.4” SS2xy9 1.00”

* If extra depth needed in electrical box order KIT-102722-color.

· UL/cUL File No. S7255

· Complies with UL 2017. UL Listed for indoor and outdoor use

(“8” button indoor only, temperature range 15° to 120°F). When mounting outdoor, must use an STI weather cover.

· UL/cUL Type NM suitable for indoor or outdoor use without a cover (#7 button only)

· UL 294 (models used with LT-1UL)

· CSA C22.2 No. 205

· ADA Compliant (excludes “3” button)

05/22

2306 Airport Road Waterford, Michigan

48327, USA

Tel: 248-673-9898 Fax: 248-673-1246 Toll-free: 800-888-4784 info@sti-usa.com www.sti-usa.com

Unit 49G Pipers Road Park Farm Industrial Estate Redditch, Worcestershire B98 OHU England

Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 Free: 0800 085 1678 (UK) www.sti-europe.com

2306 Airport Road info@sti-usa.com Waterford, MI www.sti-usa.com 48327, USA Tel:248-673-9898

Taylor House info@sti-emea.com 34 Sherwood Rd., Bromsgrove, www.sti-emea.com Worcs., B60 3DR, England Tel: +44 (0) 1527 520 999

Unit 7A Lockheed Avenue Airport Business Park Waterford X91 HWF2 Ireland

Printed in U.S.A., © 1987-2020 Safety Technology International, Inc. Subject to change without notice.

2017_12

SS2COLOR

0. Red

1. Green

2. Yellow

3. White

4. Blue

5. Orange

SWITCH CONFIGURATION

2. Key-to-Reset (Illuminated Bar)

5. Momentary (Illuminated Bar)

9. Turn-to-Reset (Illuminated Bar)

8. Pneumatic (Illuminated Bar)**

6. Momentary (Illuminated)

7. Weather Resistant Momentary (Illuminated)

0. Key-to-Reset* ***

1. Turn-to-Reset ***

3. Key-to-Activate ***

4. Momentary ***

TEXT

AB = ABORT

EM = EMERGENCY

EX = EMERGENCY EXIT

PO = EMERGENCY POWER OFF *

ES = EMERGENCY STOP

EV = EVACUATION

XT = EXIT

PS = FUEL PUMP SHUT DOWN *

HV = HVAC SHUT‐DOWN

LD = LOCKDOWN

PX = PUSH TO EXIT

NT = No Text ZA = Custom Text

* Not available with pneumatic #8 button

LANGUAGE

EN = English ES = Spanish FR = French ZL = Other Language

COVER

Flush

3. Universal Stopper, label shell*

4. Universal Stopper, horn* Surface

7. Universal Stopper, label shell*

8. Universal Stopper, horn* Flush or Surface

2. Shield A. Shield with sound

0. No Cover *Orange coming soon

*Not available in orange ** Switch 8 not recommended for outdoor/water applications, temperature range 15°F to 120°F.

*** Switch 0, 1, 3, 4 may require spacer SUB-102722 (color) to accommodate depth or a deep single-gang box.

STI Stopper® Station Series Dimensions and Technical Information

CUSTOMIZE YOUR TEXT - text option ZA White text on blue, red and green; black text on yellow, white and orange.

CUSTOM TEXT FOR TOP OF SHELL: 2 LINES, 20 CHARACTERS EACH (INCLUDES SPACES)

CUSTOM TEXT FOR BOTTOM OF SHELL: 1 LINE, 20 CHARACTERS (INCLUDES SPACES)

CUSTOM TEXT COVER 3, 4, 7, 8: 2 LINES, 40 CHARACTERS EACH (INCLUDES SPACES)

ST1

ST2

SB

C1

C2

T2

B

T2

DETAIL: B = DETAIL DESIGNATION

T2 = SHEET WHERE DETAIL IS LOCATED

SECTION: 1 = SECTION DESIGNATION

T2 = SHEET WHERE SECTION IS LOCATED

PLAN NOTE. APPLIES ONLY TO THE SHEET WHICH IT IS SHOWN.

DETAIL NOTE. APPLIES ONLY TO THE ASSOCIATED DETAIL.

GENERAL FLOOR PLAN NOTES

CONDUIT RUN IN WALL OR ABOVE CEILING PER DIV 26.

CONDUIT RUN IN SLAB OR UNDERGROUND PER DIV 26.

CABLE MANAGEMENT SYSTEM PATHWAY PER DIV 27 / DIV 28.

LADDER TRAY PER DIV 26, 12" x 4" DEEP UNLESS NOTED OTHERWISE.

CM

ABBREVIATIONS

AAP - AREA ALARM PANEL - MEDICAL GAS

ACC - ACCESS

ADJ - ADJUSTABLE

AF - ARC FAULT CIRCUIT INTERRUPTER

AFCI - ARC FAULT CIRCUIT INTERRUPTER

AFF - ABOVE FINISHED FLOOR TO BOTTOM OF ITEM

AFG - ABOVE FINISHED GRADE TO BOTTOM OF ITEM

ALT - ALTERNATE

AP - ACCESS PANEL

APPROX - APPROXIMATE

ARCH - ARCHITECT OR ARCHITECTURAL

ASSY - ASSEMBLY

ATS - AUTOMATIC TRANSFER SWITCH

BLDG - BUILDING

BOE - BOTTOM OF EQUIPMENT

BOT - BOTTOM

BTWN - BETWEEN

CFCI - CONTRACTOR FURNISHED CONTRACTOR INSTALLED

CKT - CIRCUIT

CLG - CEILING

CMU - CONCRETE MASONRY UNIT

CONN - CONNECT OR CONNECTION

CONTR - CONTRACTOR

CORR - CORRIDOR

CTR - CENTER

D - DEPTH

DET - DETAIL

DIA - DIAMETER

DIM - DIMENSION

DIV - DIVISION

DN - DOWN

DWG - DRAWING

EA - EACH

EC - ELECTRICAL (DIVISION 26)

EJ - EXPANSION JOINT

ELEC - ELECTRICAL

ELEV - ELEVATION OR ELEVATOR

EM - EMERGENCY

EQ - EQUAL

EQS - EQUIPMENT SUPPLIER

EQUIP - EQUIPMENT

ETR - EXISTING TO REMAIN

EX - EXISTING

EXP - EXPANSION

EXT - EXTERIOR

FCE - FIRE CONTROL EQUIPMENT

FF - FINISHED FLOOR ELEVATION

FLR - FLOOR

FSC - FIRE SUPPRESSION (DIVISION 21)

FT - FEET

FTG - FOOTING

GC - GENERAL CONTRACTOR

GF - GROUND FAULT CIRCUIT INTERRUPTER

GFCI - GROUND FAULT CIRCUIT INTERRUPTER OR GOVERNMENT

FURNISHED CONTRACTOR INSTALLED

GFFT - GROUND FAULT FEED THRU

HC - HVAC (DIVISION 23)

HP - HORSE POWER OR HIGH POINT

HVAC - HEATING, VENTILATING, AND AIR CONDITIONING

ID - INSIDE DIAMETER

IN - INCHES

KEC - KITCHEN EQUIPMENT

L - LENGTH

LBS - POUNDS

MAP - MASTER ALARM PANEL (MEDICAL GAS)

MAX - MAXIMUM

MEZZ - MEZZANINE

MFR - MANUFACTURER

MH - MANHOLE OR MOUNTING HEIGHT TO CENTER LINE OF ITEM

MIN - MINIMUM OR MINUTE

MISC - MISCELLANEOUS

MTD - MOUNTED

MTG - MOUNTING

NIC - NOT IN CONTRACT

NOM - NOMINAL

NTS - NOT TO SCALE

OD - OUTSIDE DIAMETER

OFCI - OWNER FURNISHED CONTRACTOR INSTALLED

OFOI - OWNER FURNISHED OWNER INSTALLED

PC - PLUMBING (DIVISION 22)

PLBG - PLUMBING

RAD - RADIUS

REC - RECESSED

REQD - REQUIRED

RI - ROUGH-IN

S - SURFACE MOUNTED

SC - SECURITY (DIVISION 28)

SCH - SCHEDULE

SHT - SHEET

SMS - SECURITY MANAGEMENT SYSTEM

SPEC - SPECIFICATIONS

SQ - SQUARE

SS - STAINLESS STEEL

STD - STANDARD

STRUC - STRUCTURAL OR STRUCTURE

SUC - SITE UTILITY CONTRACTOR

TC - TECHNOLOGY (DIVISION 27)

TEMP - TEMPERATURE

TOE - TOP OF EQUIPMENT

TYP - TYPICAL

UNO - UNLESS NOTED OTHERWISE

VFD - VARIABLE FREQUENCY DRIVE

VOL - VOLUME

W/ - WITH

W/O - WITHOUT

WP - WEATHERPROOF

ZVC - ZONE VALVE CABINET

A. THESE NOTES APPLY EQUALLY TO THE FULL SET OF DOCUMENTS.

B. SITE VISIT(S) SHALL BE AS OUTLINED IN PROJECT SPECIFICATIONS.

C. INCLUDE ALL WORK NECESSARY TO ACCOMMODATE PHASING. REFER TO

ARCHITECTURAL DRAWINGS AND GENERAL REQUIREMENTS SECTION 01 00 00.

D. THE CONTRACTOR SHALL REFER TO ALL SPECIFICATION SECTIONS AND THE

DRAWINGS FOR DETAILS OF BUILDING CONSTRUCTION TO ENSURE SPACE AND

SATISFACTORY ARRANGEMENT FOR THEIR WORK. THE VARIOUS DRAWINGS

COMPRISING THE SET ARE INTERDEPENDENT AND MUST BE USED JOINTLY AT

ALL TIMES. THE CONTRACTOR SHALL REFER TO THE GENERAL REQUIREMENTS

OF THE CONTRACT. THE NOTES AND SYMBOLS INDICATED ON THE DRAWINGS

ARE FOR THE GUIDANCE OF ALL TRADES INVOLVED IN THE PROJECT AND MUST

BE FOLLOWED TO EXECUTE THE WORK AS INTENDED. IF DISCREPANCIES OCCUR,

CONTACT THE COR THROUGH THE CONTRACTING OFFICER FOR CLARIFICATION

BEFORE PROCEEDING.

E. ALL WORK MUST BE COORDINATED WITH THE CONTRACTING OFFICER AND (FOR

ALL OTHERS) TO MAINTAIN OPERATION OF THE EXISTING FACILITY.

F. ALL WORK SHALL BE PERFORMED IN COMPLETE COMPLIANCE WITH ALL CURRENT

OVERNING CODES AND STANDARDS.

G. EXISTING CONDITIONS SHOWN HAVE BEEN BASED UPON AVAILABLE DRAWING

INFORMATION, AND MAY BE AT VARIANCE WITH ACTUAL WORK IN PLACE. THE

CONTRACTOR SHALL TAKE ALL NECESSARY FIELD MEASUREMENTS AND FIELD

VERIFY ALL CONDITIONS AFFECTING THE EXECUTION OF THE WORK. ANY

DISCREPANCIES BETWEEN EXISTING CONDITIONS AND THE WORK SHOWN ON THE

CONTACT DOCUMENTS WHICH MAY IMPACT THE PROGRESS OF THE WORK SHALL

BE BROUGHT TO THE ATTENTION OF THE CONTRACTING OFFICER IN WRITING

FOR RESOLUTION BEFORE PROCEEDING WITH THE WORK.

H. REFER TO ARCHITECTURAL FIRE-RATED PARTITION PLAN(S) FOR LOCATIONS AND

FIRE-RATING OF NEW AND EXISTING WALL ASSEMBLIES. ALL PENETRATIONS

THROUGH FIRE-RATED ASSEMBLIES SHALL BE PROJECTED AND/OR FIRE-STOPPED

AS REQUIRED TO MAINTAIN FIRE-RATINGS INDICATED. COORDINATE WITH ALL

TRADES TO ENSURE FIRE-RATED PENETRATION REQUIREMENTS AND DETAILS

ARE MET.

I. ANNULAR SPACE OF ALL PIPE, CONDUIT, DUCT AND OTHER SIMILAR PENETRATIONS

OF FIRE RATED ASSEMBLIES SHALL BE FIRESTOPPED. IN ADDITION, PENETRATIONS

THROUGH 0-HOUR RATED WALLS AND FLOORS SHALL BE FIRESTOPPED TO RETARD

PASSAGE OF FIRE AND SMOKE.

J. ALL CONDUITS IN FINISHED ROOMS AND CORRIDORS SHALL BE CONCEALED IN A

WALL OR ABOVE CEILING.

K. ACCESS PANELS IN NON ACCESSIBLE CEILINGS SHALL BE PROVIDED FOR ALL

ELECTRICAL ITEMS REQUIRING ACCESS.

L. REFER TO ARCHITECTURAL REFLECTED CEILING PLANS FOR EXACT LOCATION OF

LIGHTS, SPEAKERS, NURSE CALL DEVICES, ETC.

M. ALL CUTTING AND PATCHING REQUIRED FOR THIS PROJECT SHALL BE INCLUDED IN

THE CONTRACT. REFINISH ANY SURFACE DISTURBED UNDER THIS WORK TO MATCH

EXISTING.

N. ANY REMOVED EQUIPMENT SHALL BE TURNED OVER TO THE VA. ITEMS NOT DESIRED

BY THE VA SHALL BE REMOVED FROM THE PREMISES AND DISPOSED OF PROPERLY

BY THE CONTRACTOR.

O. THE CONTRACT DRAWINGS ARE NOT INTENDED TO SHOW EVERY VERTICAL OR HORIZONTAL

OFFSET WHICH MAY BE NECESSARY TO COMPLETE THE SYSTEMS. COORDINATE WORK IN

ADVANCE WITH ALL OTHER TRADES AND REPORT IMMEDIATELY AND DIFFICULTIES

WHICH CAN BE ANTICIPATED.

P. ALL ABANDONED EXTRANEOUS CONDUITS, WIRING, DEVICES, ETC. SHALL BE REMOVED.

Q. REFER TO MECHANICAL DRAWINGS FOR ADDITIONAL INFORMATION CONCERNING

MECHANICAL EQUIPMENT THAT REQUIRES ELECTRICAL CONNECTIONS.

GENERAL NOTES

SECURITY SYMBOLS

CC

1 CCTV SYSTEM CEILING MOUNTED CAMERA. REFER TO CAMERA SCHEDULE FOR MOUNTING HEIGHT AND CAMERA

SPECIFICATIONS. SUBSCRIPT "X" INDICATES ENTRY IN CAMERA SCHEDULE.

IM DESK MOUNTED INTERCOM MASTER STATION.

CE PROVIDE INTERFACE FROM CARD ACCESS SYSTEM INTO ELEVATOR CONTROLLER INCLUDING ALL NECESSARY

HARDWARE, PROGRAMMING AND CABLING AS COORDINATED WITH ELEVATOR CONTRACTOR.

MD CEILING MOUNTED MOTION DETECTOR.

PB DESK MOUNTED PUSH BUTTON FOR LOCAL ELECTRONIC DOOR RELEASE.

JS CCTV SYSTEM REMOTE JOYSTICK/CONTROLLER AND KEYPAD OPERATOR'S STATION.

GLASS BREAK.GB

X

PP DESK MOUNTED PANIC/DURESS BUTTON.

SECURITY SYMBOLS WITH ELECTRICAL REQUIREMENTS

CC

CCTV SYSTEM WALL MOUNTED CAMERA (REFER TO CAMERA SCHEDULE FOR MOUNTING HEIGHT AND CAMERA SPECIFICATIONS). SUBSCRIPT "X" INDICATES ENTRY IN CAMERA SCHEDULE. 1-GANG BOX WITH 0.75" CONDUIT TO ABOVE

ACCESSIBLE CEILING PER DIV 26. CAMERA AND CABLING PER DIV 28.

PS

LOCAL LOW VOLTAGE POWER SUPPLY FOR EXTERIOR CAMERA. SUBSCRIPT "X" INDICATES ASSOCIATED CAMERA. 120V POWER INTO LOCAL JUNCTION BOX ABOVE CEILING AND CONNECTION TO POWER SUPPLY PER DIV 26. POWER SUPPLY

MOUNTED ABOVE CEILING AND LOW VOLTAGE WIRING TO LOCAL CAMERA PER DIV 28.

IC

WALL MOUNTED INTERCOM DOOR STATION (46" MH UNLESS NOTED OTHERWISE). 1-GANG BOX WITH 0.75" CONDUIT TO

ABOVE ACCESSIBLE CEILING PER DIV 26. INTERCOM AND CABLING PER DIV 28.

DM

DOOR POSITION SWITCH WITH WIRING PER DIV 28. CONDUIT PATHWAYS FROM DOOR FRAME TO COMMON SMS JUNCTION BOX ABOVE ACCESSIBLE CEILING PER DIV 26. PROVIDE ONE CONTACT FOR EACH LEAF IN MULTI-DOOR

OPENINGS. REFER TO SECURITY ROUGH-IN DETAILS.

EL

ELECTRONIC DOOR LOCK AND INSTALLATION BY OTHERS. LOW VOLTAGE WIRING PER DIV 28. CONDUIT PATHWAYS FROM DOOR FRAME TO COMMON SMS JUNCTION BOX ABOVE ACCESSIBLE CEILING PER DIV 26. REFER TO SECURITY

ROUGH-IN DETAILS.

EM

ELECTRONIC MAG LOCK AND INSTALLATION BY OTHERS. LOW VOLTAGE WIRING PER DIV 28. CONDUIT PATHWAYS FROM DOOR FRAME TO COMMON SMS JUNCTION BOX ABOVE ACCESSIBLE CEILING PER DIV 26. REFER TO SECURITY ROUGH-IN

DETAILS.

ES

ELECTRONIC STRIKE AND INSTALLATION BY OTHERS. LOW VOLTAGE WIRING PER DIV 28. CONDUIT PATHWAYS FROM DOOR FRAME TO COMMON SMS JUNCTION BOX ABOVE ACCESSIBLE CEILING PER DIV 26. REFER TO SECURITY ROUGH-IN

DETAILS.

LB

RX

REQUEST TO EXIT SWITCH IN DOOR HARDWARE BY OTHERS. LOW VOLTAGE WIRING PER DIV 28. CONDUIT PATHWAYS FROM DOOR FRAME TO COMMON SMS JUNCTION BOX ABOVE ACCESSIBLE CEILING PER DIV 26. REFER TO SECURITY

ROUGH-IN DETAILS.

HD

HANDICAP DOOR OPERATOR MOTOR ASSEMBLY BY OTHERS. 120V POWER CONNECTION AND CONDUIT FROM DOOR FRAME TO COMMON SMS JUNCTION BOX ABOVE ACCESSIBLE CEILING PER DIV 26. LOW VOLTAGE WIRING AND INTERFACE WITH SMS AND DOOR ACTUATOR BUTTONS PER DIV 28. REFER TO SECURITY ROUGH-IN DETAILS.

HA

WALL/PEDESTAL MOUNT HANDICAP DOOR ACTUATOR BUTTON, FURNISHED BY OTHERS. BOX AS REQUIRED BY SYSTEM MANUFACTURER WITH INSTALLATION AND CONDUIT TO COMMON SMS JUNCTION BOX ABOVE ACCESSIBLE CEILING PER DIV 26. ALL LOW VOLTAGE WIRING AND INTERFACE WITH SMS AND DOOR MOTOR PER DIV 28. REFER TO SECURITY

ROUGH-IN DETAILS.

HO

FA

WALL/FLOOR MOUNTED ELECTROMAGNETIC DOOR HOLD OPEN WITH POWER SUPPLY INSTALLED BY OTHERS. 120V POWER AND CONNECTION, BOX AS REQUIRED BY MANUFACTURER AND CONDUIT TO COMMON SMS JUNCTION BOX ABOVE ACCESSIBLE CEILING PER DIV 26. LOW VOLTAGE WIRING FROM POWER SUPPLY TO HOLD OPEN AND INTERFACE WITH SMS PER DIV 28. SUBSCRIPT "FA" INDICATES DEVICES POWERED FROM FIRE ALARM SYSTEM AND INTERFACE FROM SMS TO FIRE ALARM SYSTEM REQUIRED FOR DOOR RELEASE PER DIV 28. REFER TO SECURITY ROUGH-IN DETAILS.

CR

WALL MOUNTED PROXIMITY CARD READER (46" MH UNLESS NOTED OTHERWISE). 1-GANG BOX WITH CONDUIT TO COMMON SMS JUNCTION BOX ABOVE ACCESSIBLE CEILING PER DIV 26. REFER TO SECURITY ROUGH-IN DETAILS. CARD

READER IS ROUGH-IN ONLY.

CR EL

ELEVATOR CAB MOUNTED CARD READER. READER TO BE INSTALLED IN ELEVATOR CAB AS COORDINATED WITH ELEVATOR CONTRACTOR. WIRING FROM CAB THRU TRAVELING CABLE TO ELEVATOR CONTROLLER IN ELEVATOR MACHINE ROOM AND INTERFACE WITH ELEVATOR CONTROLLER AND SMS PER DIV 28, COORDINATE WITH ELEVATOR

CONTRACTOR. REFER TO SECURITY ROUGH-IN DETAILS.

KC

WALL MOUNTED COMBINATION KEYPAD/CARDREADER (46" MH UNLESS NOTED OTHERWISE). 2-GANG BOX WITH 0.75" CONDUIT TO COMMON SMS JUNCTION BOX ABOVE ACCESSIBLE CEILING PER DIV 26. DEVICE AND CABLING PER DIV 28.

K WALL…