S02 Appendix C Cut Sheets File 1 - Retro-Commissioning.pdf

Retro-Commissioning Mechanical Corrections Lebanon VA Medical Center

Final Bid Documents Submission November 2019

Alares, LLC dba Alares Engineering 248 Copeland Street

Quincy, Massachusetts 02169

617.481.6390 ph | 617.687.5990 fx www.AlaresEngineering.com

Achieving swift results

Appendix C

Catalogue Sheets

SOLUTION XT AIR HANDLING UNIT

PERFORMANCE SPECIFICATION

Unit Tag Qty Model Air Flow (CFM) AHU-1 1 Indoor Air Handler 36 x 69 5500

Project Name: (ALARES) VA Lebanon York Contract No.:

Printed: 1/2/2019 15:38:43 AHU-1Performance Unit Folder: AHU-1 1/2/2019 3:15:37 PM Page 1 of 8

Unit Sequence

Tier 1 FS <<< CC <<< RF

Basic Unit Options

Insulation Type: (Refer to Each Segment) Base Rail Height: 6" Formed Steel NON Welded

Base Performance: High Performance

Statement of compliance of standard units.

Solution XT AHU's meet IBC seismic requirements for non-critical equipment (Ip = 1.0) for locations with design spectral response Sds <= 0.43. Units must be rigid mounted.

The anchorage of the unit to the ground or building structure needs to be evaluated by and is the responsibility of the engineer of record.

Specification of seismic requirements is the responsibility of the project design engineer. If formal certification is required, please contact your sales representative and/or application engineer for review. Certain application and site requirements may require additional cost and/or lead time.

*Note:Component locations are listed as Segment Hand (Unit Hand) : ex. Left (Right) See Submittal Drawing for additional details

BruceC Text Box

BUILDING 1 - AC-9

Unit Tag Qty Model Air Flow (CFM) AHU-1 1 Indoor Air Handler 36 x 69 5500

Project Name: (ALARES) VA Lebanon York Contract No.:

Printed: 1/2/2019 15:38:43 AHU-1Performance Unit Folder: AHU-1 1/2/2019 3:15:37 PM Page 2 of 8

Segments Listed Starting At Air Inlet

RF – High Efficiency Filter Segment

Filter Media Details Filter Segment Options (Quantity)Filter Sizes: (3)20x24 Interior STD Ga. Galvanized Liner

Insulation: R-13 2" Foam STD Ga. Galvanized Floor Liner Exterior STD Ga. Galvanized Liner Galvanized Blankoff Material Prefilter Gauge (Minihelic) (0 - 0.5 in. w. c.) (Door) Primary Filter Gauge (Minihelic) (0 - 1 in. w. c.)

(Door) Access Door on Left Side(Left) 30H x 18W Multiple Handles, No Lock, Outward Opening Optimized Filter Arrangement

Filter Area (ft²) 10.0 Filter Loading: Side Prefilter Depth: 2" Prefilter Media: Pleated 30%

(MERV 8)

Prefilter Air Pressure Drop (in. w.g.): 0.31 Prefilter Dirty Allowance (in. w.g.): 0.00 High Eff. Filter Depth: 12" Rigid High Eff. Filter Media: 90-95% Eff, (MERV 14)

High Eff. Filter Air Pressure Drop (in. w.g.): 0.67 High Eff. Filter Dirty Allowance (in. w.g.): 0.00

CC – Cooling Coil Segment

Coil Segment Details Coil Segment Options Coil Space: 10" Interior STD Ga. Galvanized Liner

Insulation: R-13 2" Foam STD Ga. Galvanized Floor Liner Exterior STD Ga. Galvanized Liner 304 Stainless Steel Intermediate Pan 19" IAQ Drain Pan Left (Left) Stainless Steel Bulkhead Material Stainless Steel Coil Supports Stainless Steel

Unit Tag Qty Model Air Flow (CFM) AHU-1 1 Indoor Air Handler 36 x 69 5500

Project Name: (ALARES) VA Lebanon York Contract No.:

Printed: 1/2/2019 15:38:43 AHU-1Performance Unit Folder: AHU-1 1/2/2019 3:15:37 PM Page 3 of 8

FS - Supply Fan Segment Segment Details Fan Segment Options

Segment Air Pressure Drop (in. w.g.): 0.00 1" Spring Isolator Thrust Restraint Interior STD Ga. Galvanized Liner Insulation: R-13 2" Foam STD Ga. Galvanized Floor Liner Exterior STD Ga. Galvanized Liner Access Door on Left Side(Left) 30H x 18W Multiple Handles, No Lock, Outward Opening

Air Flow per Fan (CFM): 5500 Air Flow Total (CFM): 5500 Altitude (ft.): 16 TSP/ESP (in. w.g.): 3.15/ 1.50 Air Inlet: Front(Front) Fan Discharge: Rear(Rear)

Fan Detail Type: AF Size: 12-12 Construction: II Bearing Options: Extended Lube Fan RPM: 3347

BHP: 6.06

Fan BHP w/ Belt Loss: 6.40 Outlet Velocity (ft/min): 3312

Motor Detail (per motor) Motor Type: WEG ODP Premium Efficiency

HP 7.5

Voltage/Phase/Frequency: 460/3/60 Hz Insulation Class: F Motor RPM: 1800 Frame Size: 213 Location Left(Left)

Drive Type: Belt Drive Belt Drive Type: Fixed

Full Load Amps (FLA): 9.25 Efficiency: 91.0%

Hly Rectangle

Hly Rectangle

Unit Tag Qty Model Air Flow (CFM) AHU-1 1 Indoor Air Handler 36 x 69 5500

Project Name: (ALARES) VA Lebanon York Contract No.:

Printed: 1/2/2019 15:38:43 AHU-1Performance Unit Folder: AHU-1 1/2/2019 3:15:37 PM Page 4 of 8

Coils & Spacers Listed Starting In Direction Of Air Flow

CC Coil - 01 Coil General/Physical Details Air Side Performance Fluid Side Performance Location: 0 Air Flow (acfm): 5500 EWT (°F):

LWT (°F):

GPM:

WPD (ft):

FPS:

Fluid Type:

Fluid Weight(lb):

Fluid Volume(ft³):

44.0 56.0 31.3

9.8 4.0

Water 62.3

1.0

Tag: AirCoil Altitude (ft.): 16 Application: Cooling EAT-DB (°F): 78.5 Coil Type: Water EAT-WB (°F): 65.3 Face Type: Full LAT-DB (°F): 54.6 Tube Diameter: 5/8" CDW LAT-WB (°F): 53.6

Tube Material: Copper FV (ft/min): 519 Tube Wall Thickness: .025" SMBH: 141.9 Fouling Factor (hft²°F/btu): 0.00000 TMBH: 189.3 Fin Type: Sine APD (in. w.g.): 0.67 Fin Thickness: .010" Fin Material: Aluminum Casing Material: 304 Stainless Steel Connection Material: Steel* Connection Type: MPT Coating: None

Rows: 5 Fins Per Inch: 9

Tubes Per Circuit: 10 Finned Height (in.): 27.25 Finned Length (in.): 56 Coil Face Area (ft²): 10.6 Coil Conn. Loc.: Left(Left) Supp Conn Size:

Rtn Conn Size:

Supply Conn.(per coil):

2" 2"

*Johnson Controls suggests using red brass or copper connectors when the coil is to be attached to a copper or brass piping system.

Ratings are for coils manufactured by Johnson Controls, Inc., 507 E. Michigan St., Milwaukee WI 53202.

CDW Tube Spacing: 1.50" x 1.30"

AHRI Messages:

This coil is certified in accordance with the AHRI Forced-Circulation Air-Cooling and Air-Heating Coils Certification Program which is based on AHRI Standard 410 within the range of Standard rating conditions listed in Table 1 of the Standard. Certified units may be found in the AHRI Directory at www.ahridirectory.org.

Coil Dll Version: 7.7c.004

Static Pressure Summary

Unit Tag Qty Model Air Flow (CFM) AHU-1 1 Indoor Air Handler 36 x 69 5500

Project Name: (ALARES) VA Lebanon York Contract No.:

Printed: 1/2/2019 15:38:43 AHU-1Performance Unit Folder: AHU-1 1/2/2019 3:15:37 PM Page 5 of 8

Segment Component Supply (in.

w.g.)

Return Fan

(in. w.g.)

RF High Efficiency Filter

CC Variable Length Cooling Coil FS-DWDI Supply Fan

2" Pleated 30% (MERV 8) Dirty Filter Allowance - Prefilter 12" Rigid 90-95% Eff, (MERV 14) Cooling 5 rows 9 fins External Static Pressure - User Entered Pressure Drop

0.31 0.00 0.67 0.67 1.50

Total 3.15 0.00

Air handling unit parameters vary depending on conditions. Parameters such as airflows, air pressure drops, and coil capacities are shown for design conditions.

Dimension & Weights Summary

Section Length*

(in.)

Width**

(in.)

Height

(in.)

Weight

(lbs.)

RF High Efficiency Filter Segment CC Variable Length Cooling Coil Segment FS-DWDI Supply Fan Segment

Overall: 82 69 36 1738 *The length includes bottom tier segments only.

**The width does not include coil connection extensions or door latches that extent beyond the unit casing.

The width does not include the depth of any pipe chases.

Unit Tag Qty Model Air Flow (CFM) AHU-1 1 Indoor Air Handler 36 x 69 5500

Project Name: (ALARES) VA Lebanon York Contract No.:

Printed: 1/2/2019 15:38:43 AHU-1Performance Unit Folder: AHU-1 1/2/2019 3:15:37 PM Page 6 of 8

Shipping Skid Summary

Shipping Skid Length*

(in.)

Width**

(in.)

Height***

(in.)

Weight

(lbs.)

(FS-DWDI)

(CC RF)

Ship Loose:

None

*The length includes any mounted rain-hoods, discharge flanges, tie-down brackets, shipping wood-blocks, front dampers, split connectors, electrical/control components, outrigging extensions, isolation dampers, inlet baskets

**The width includes any door handles, coil connections, drain connections, lifting lugs, mounted pipe-chases, electrical/control components, tie-down brackets, side dampers

***The height includes any base-rails, shipping wood-blocks, roof peak, discharge flanges, mounted gas-furnace flue pipes

Shipping Skid Sequence

Tier

(FS) < (CC < RF)

Unit Tag Qty Model Air Flow (CFM) AHU-1 1 Indoor Air Handler 36 x 69 5500

Project Name: (ALARES) VA Lebanon York Contract No.:

Printed: 1/2/2019 15:38:43 AHU-1Performance Unit Folder: AHU-1 1/2/2019 3:15:37 PM Page 7 of 8

Sound Summary

Octave Band Sound Power Levels (dB Re. 1 picowatt)

63 125 250 500 1000 2000 4000 8000 dBA Ducted Discharge Rear-1, FS 97 95 96 97 93 90 85 82 Return Air INLET, RF 91 90 84 89 82 77 69 62

Sound data tested in accordance with AHRI-260 (2001), Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.

Notes:

1. The overall A-weighted sound power level is only applicable to sound radiation outdoors and casing radiated sound. This metric does not apply to ducted components

2. Return air sound powers are estimated using 100% of unit flow.

Unit Tag Qty Model Air Flow (CFM) AHU-1 1 Indoor Air Handler 36 x 69 5500

Project Name: (ALARES) VA Lebanon York Contract No.:

Printed: 1/2/2019 15:38:43 AHU-1Performance Unit Folder: AHU-1 1/2/2019 3:15:37 PM Page 8 of 8

Recommended Trap Height Summary

Applicable Fan TSP Positive or Calculated Dimensions Recommended Base Rail

Segment Fan [in H2O] Negative H X H + X H H + X Height

CC Supply Fan 3.15" Negative 4.15" 2.08" 6.23" 4.25" 6.50" 6"

Notes:

Formulas and calculations are recommendations only. Contractor shall determine actual dimensions required for each trap based on jobsite conditions, and application requirements.

Refer to section 2 (Installation) of the IOM for more information.

3 5/16"Screwdriver

Full Open, Add 3/8" When Damper Is

To Overall Depth.

For Optional Damper

Slot Operator

Damper

Model AG-15 Optional

Opposed Blade D minus 1/2"

Nominal Duct Size D "

Note:

1/4"

2 1/16"

1 1/4"

9/16" 3/4"

D minus 3/4"

D plus 1 3/4"

Border Type 1 (Surface Mount)

Available Sizes (D” x D”)

6” x 4” through 48” x 48” in 2” increments in one piece construction. Odd and fractional sizes are available at additional cost. Sizes larger than 48” x 48” are shipped in multiple sections with joining strips for field assembly.

Note: Wall or duct opening should be duct area ± 1/8”. All dimensions are in inches.

Submittal Louvered Supply Grilles • Aluminum

Models: 300FL • Double Deflection • Front Long Blades • ¾” Blade Spacing

300FS • Double Deflection • Front Short Blades • ¾” Blade Spacing

300F 02-16-18

1 1/2"

1/4"

5/16"

Duct plus 1/16"

Duct plus 2 3/8"

Duct plus 1 7/8"

1/4"

1 1/2"

5/16"

1/4"

Duct plus 2 3/8"

Duct plus 1 7/8"

Duct plus 1/16"

1/4"

Fastenings Mounting Frames

Type A • External Screw Type C • Concealed Screw PFA • Aluminum Plaster Frame

Type A & C available with Border Type 1 only. Blades not shown for clarity.

For actual blade configuration see above. Type C fastening is available with damper.

Surface Mounted Example Recessed Mounted Example

Note: Wall opening should be listed duct size + 1/8” to listed duct size + 1/4”. Double

Deflection blades shown for clarity. For actual blade configuration see above

Accessories (Optional)

Standard Finish: #26 White

Neck mounted opposed blade damper (galvanized steel)

EQT • Earthquake Tabs

General Description

IS • Insect Screen (1/16” square mesh – galvanized steel)

DS • Debris Screen (1/4” square mesh – galvanized steel)

Other: ____________________

Other Finish: _____________

• Available with front louvers vertical or horizontal

• Optional opposed blade damper has screwdriver adjustment accessible through face of grille

• Front and rear louvers are individually adjustable

• Insect and debris screens are not available with damper option

• Material is aluminum

• #8 x 1 1/4” lg. Phillip’s flat head sheet metal screws (painted)

• All dimensions are ± 1/16”

Check if provided.

This submittal is meant to demonstrate general dimensions of th is product . The drawings are not meant to detail every aspect of the product. Drawings are not to scale. Titus reserves the right to make changes without written notice.

All rights reserved. No part of thi s work m ay be reproduced or t ransmi tted in any form or by any m eans, electronic or mechanical , including photocopying and recording , or by any i nformat ion storage ret rieval system without perm issi on in writ ing from Air Dist ribution Technologies .

Ceiling Module Size minus 1/4"

Border Type 3 (Lay-in)

Panel Mounted

Available in all standard module sizes with neck sizes up to module size minus 2”.

FG • Foam Gasket jweeks Textbox Building 1

300 / 350 grilles

Redefine your com fort zone. ™

| w w w .titus-hvac.com

H17

H

PERFO

RM

AN

CE D

ATA

PERFORMANCE DATA

MODELS: 300R, 300F, 300R-SS, 300R-HD, 301R, 301F, 301R-SS AND 301R-HD

PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD

NC-20 NC-30 NC-40

Core Vel. 300 400 500 600 700 800 1000 1200 1400 Nom. Nom. Core Vel. Press. 0.006 0.010 0.016 0.022 0.031 0.040 0.062 0.090 0.122 Duct Duct Area 0° 0.016 0.029 0.046 0.066 0.090 0.117 0.183 0.263 0.358 Size Area ( ft2 ) Total 22.5° 0.018 0.033 0.051 0.074 0.100 0.131 0.204 0.294 0.401 ( in. ) ( ft2 ) Press. 45° 0.028 0.049 0.077 0.111 0.152 0.198 0.309 0.445 0.606 cfm 57 76 95 114 133 152 190 228 266

NC - - - 15 20 24 31 36 41

6x6 0.25 0.19 0° 5-7-14 7-10-16 8-12-18 10-14-20 12-15-21 13-16-23 15-18-25 16-20-28 17-21-30 Throw 22.5° 4-6-11 5-8-12 6-10-14 8-11-15 9-12-16 10-12-18 11-14-20 12-15-22 13-16-23

(ft) 45° 2-3-6 3-4-7 4-6-8 4-6-9 5-7-10 6-7-10 7-8-11 7-9-12 8-10-13 cfm 78 104 130 156 182 208 260 312 364

NC - - 11 17 21 25 32 38 42

8x6 0.33 0.26 0° 5-9-16 8-12-19 10-15-21 12-16-23 14-18-25 15-19-27 17-21-30 19-23-32 20-25-35 Throw 22.5° 4-7-13 6-9-15 8-11-16 9-13-18 11-14-19 12-15-21 13-16-23 15-18-25 16-19-27

(ft) 45° 2-4-7 3-5-8 4-7-9 5-7-10 6-8-11 7-8-12 8-9-13 8-10-15 9-11-16 cfm 102 136 170 204 238 272 340 408 476

NC - - 12 18 23 27 33 39 43

10x6 0.42 0.34 0° 6-10-19 9-13-21 11-17-24 13-19-26 16-20-28 18-21-30 20-24-34 21-26-37 23-28-40 Throw 22.5° 5-8-14 7-10-17 9-13-19 10-14-20 12-16-22 14-17-23 15-19-26 17-20-29 18-22-31

(ft) 45° 3-4-8 4-6-10 5-7-11 6-8-12 7-9-13 8-10-14 9-11-15 10-12-17 10-13-18 cfm 111 148 185 222 259 296 370 444 518

NC - - 13 18 23 27 34 39 44

8x8 0.44 0.37 0° 6-10-19 9-14-22 12-17-25 14-19-27 16-21-30 18-22-32 20-25-35 22-27-39 24-30-42 Throw 22.5° 5-8-15 7-11-17 9-13-19 11-15-21 13-16-23 14-17-25 16-19-27 17-21-30 19-23-32

(ft) 45° 3-5-9 4-6-10 5-8-11 6-9-12 7-9-13 8-10-14 9-11-16 10-12-17 11-13-19 cfm 123 164 205 246 287 328 410 492 574

NC - - 13 19 23 27 34 39 44

12x6 0.50 0.41 0° 7-11-20 10-15-24 12-18-26 15-20-29 17-22-31 19-24-33 21-26-37 24-29-41 25-31-44 Throw 22.5° 5-8-16 8-11-18 9-14-20 11-16-22 13-17-24 15-18-26 17-20-29 18-22-32 20-24-34

(ft) 45° 3-5-9 4-7-11 5-8-12 7-9-13 8-10-14 9-11-15 10-12-17 11-13-18 11-14-20 cfm 144 192 240 288 336 384 480 576 672

NC - - 14 19 24 28 35 40 45

14x6 0.58 0.48 0° 7-12-22 11-16-25 13-20-28 16-22-31 18-24-34 21-25-36 23-28-40 25-31-44 28-34-48 Throw 22.5° 6-9-17 8-12-20 10-15-22 12-17-24 14-18-26 16-20-28 18-22-31 20-24-34 21-26-37

(ft) 45° 3-5-10 5-7-11 6-9-13 7-10-14 8-11-15 9-11-16 10-13-18 11-14-20 12-15-21 cfm 171 228 285 342 399 456 570 684 798

16x6 NC - - 15 20 25 29 35 41 45 12x8 0.67 0.57 0° 8-13-24 11-17-28 14-22-31 17-24-34 20-26-37 23-28-39 25-31-44 28-34-48 30-37-52

Throw 22.5° 6-10-19 9-13-22 11-17-24 13-19-26 16-20-28 18-22-30 20-24-34 22-26-37 23-28-40

(ft) 45° 4-6-11 5-8-12 6-10-14 8-11-15 9-12-17 10-12-18 11-14-20 12-15-22 13-17-23 cfm 177 236 295 354 413 472 590 708 826

NC - - 15 20 25 29 35 41 46

10x10 0.69 0.59 0° 8-13-24 12-18-28 15-22-32 18-24-35 20-26-37 23-28-40 26-32-45 28-35-49 31-37-53 Throw 22.5° 6-10-19 9-14-22 11-17-24 14-19-27 16-20-29 18-22-31 20-24-35 22-27-38 24-29-41

(ft) 45° 4-6-11 5-8-13 7-10-14 8-11-16 9-12-17 10-13-18 12-14-20 13-16-22 14-17-24 cfm 189 252 315 378 441 504 630 756 882

NC - - 15 20 25 29 36 41 46

18x6 0.75 0.63 0° 8-14-25 12-18-29 15-23-33 18-25-36 21-27-39 24-29-41 27-33-46 29-36-51 32-39-55 Throw 22.5° 7-11-20 9-14-23 12-18-25 14-20-28 16-21-30 18-23-32 21-25-36 23-28-39 24-30-42

(ft) 45° 4-6-11 5-8-13 7-10-15 8-11-16 9-12-17 11-13-19 12-15-21 13-16-23 14-17-25 cfm 216 288 360 432 504 576 720 864 1008

20x6 NC - - 16 21 26 30 36 42 46 12x10 0.83 0.72 0° 9-15-27 13-19-31 16-24-35 19-27-38 23-29-41 25-31-44 28-35-49 31-38-54 34-41-58

Throw 22.5° 7-11-21 10-15-24 12-19-27 15-21-30 17-23-32 20-24-34 22-27-38 24-30-42 26-32-45

(ft) 45° 4-7-12 6-9-14 7-11-16 9-12-17 10-13-19 11-14-20 13-16-22 14-17-24 15-19-26 cfm 231 308 385 462 539 616 770 924 1078

NC - - 16 21 26 30 37 42 47

22x6 0.92 0.77 0° 9-15-28 13-20-32 17-25-36 20-28-40 23-30-43 26-32-46 29-36-51 32-40-56 35-43-60 Throw 22.5° 7-12-22 10-16-25 13-19-28 16-22-31 18-23-33 20-25-35 23-28-40 25-31-43 27-33-47

(ft) 45° 4-7-13 6-9-15 8-11-16 9-13-18 11-14-19 12-15-21 13-16-23 15-18-25 16-19-27 cfm 264 352 440 528 616 704 880 1056 1232

24x6 NC - - 16 22 26 30 37 43 47 18x8 1.00 0.88 0° 10-16-30 14-21-34 18-27-39 21-30-42 25-32-46 28-34-49 31-39-55 34-42-60 37-46-65

12x12 Throw 22.5° 8-12-23 11-17-27 14-21-30 17-23-33 19-25-35 22-27-38 24-30-42 27-33-46 29-35-50

(ft) 45° 4-7-13 6-10-16 8-12-17 10-13-19 11-15-21 13-16-22 14-17-25 16-19-27 17-21-29 cfm 333 444 555 666 777 888 1110 1332 1554 30x6 NC - 11 17 23 27 31 38 44 48

18x10 1.25 1.11 0° 11-18-34 16-24-39 20-30-43 24-34-47 28-36-51 32-39-55 35-43-61 39-47-67 42-51-72 Throw 22.5° 9-14-26 12-19-30 16-23-34 19-26-37 22-28-40 25-30-42 27-34-47 30-37-52 32-40-56

(ft) 45° 5-8-15 7-11-17 9-14-19 11-15-21 13-16-23 14-17-25 16-19-28 17-21-30 19-23-33

Performance notes appear at end of table swhooley Rectangle swhooley Rectangle swhooley Typewriter

AC-9-1

Re de fin e yo ur c om fo rt zo ne w w w .ti tu s-hv ac

.c om

H18

H

PE

RF

O

RM

AN

CE

D

AT

A

PERFORMANCE DATA

MODELS: 300R, 300F, 300R-SS, 300R-HD, 301R, 301F, 301R-SS AND 301R-HD

PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD

NC-20 NC-30 NC-40 NC-50

Core Vel. 300 400 500 600 700 800 1000 1200 1400 Nom. Nom. Core Vel. Press. 0.006 0.010 0.016 0.022 0.031 0.040 0.062 0.090 0.122 Duct Duct Area 0° 0.016 0.029 0.046 0.066 0.090 0.117 0.183 0.263 0.358 Size Area ( ft2 ) Total 22.5° 0.018 0.033 0.051 0.074 0.100 0.131 0.204 0.294 0.401 ( in. ) ( ft2 ) Press. 45° 0.028 0.049 0.077 0.111 0.152 0.198 0.309 0.445 0.606 cfm 366 488 610 732 854 976 1220 1464 1708

NC - 11 18 23 28 32 39 44 49

14x14 1.36 1.22 0° 12-19-35 17-25-41 21-31-45 25-35-50 29-38-54 33-41-57 37-45-64 41-50-70 44-54-76 Throw 22.5° 9-15-27 13-20-31 16-24-35 20-27-39 23-29-42 26-31-45 29-35-50 31-39-55 34-42-59

(ft) 45° 5-8-16 8-11-18 9-14-20 11-16-22 13-17-24 15-18-26 17-20-29 18-22-32 20-24-34 cfm 405 540 675 810 945 1080 1350 1620 1890

36x6 NC - 12 18 24 28 32 39 44 49 27x8 1.50 1.35 0° 12-20-37 18-26-43 22-33-48 26-37-52 31-40-57 35-43-60 39-48-68 43-52-74 46-57-80

18x12 Throw 22.5° 10-15-29 14-21-33 17-26-37 21-29-41 24-31-44 27-33-47 30-37-52 33-41-57 36-44-62

(ft) 45° 6-9-17 8-12-19 10-15-21 12-17-24 14-18-25 16-19-27 18-21-30 19-24-33 21-25-36 cfm 411 548 685 822 959 1096 1370 1644 1918

NC - 12 18 24 28 32 39 44 49

22x10 1.53 1.37 0° 12-20-37 18-27-43 22-33-48 27-37-53 31-40-57 35-43-61 39-48-68 43-53-75 46-57-81 Throw 22.5° 10-16-29 14-21-33 17-26-37 21-29-41 24-31-44 27-33-47 30-37-53 33-41-58 36-44-62

(ft) 45° 6-9-17 8-12-19 10-15-22 12-17-24 14-18-26 16-19-27 18-22-31 19-24-34 21-26-36 cfm 447 596 745 894 1043 1192 1490 1788 2086

30x8 NC - 12 19 24 29 33 39 45 49 24x10 1.67 1.49 0° 13-21-39 19-28-45 23-35-50 28-39-55 32-42-59 37-45-63 41-50-71 45-55-78 48-59-84

Throw 22.5° 10-16-30 14-22-35 18-27-39 22-30-43 25-33-46 28-35-49 32-39-55 35-43-60 38-46-65

(ft) 45° 6-9-17 8-13-20 10-16-23 13-17-25 15-19-27 16-20-29 18-23-32 20-25-35 22-27-38 cfm 477 636 795 954 1113 1272 1590 1908 2226 42x6 NC - 12 19 24 29 33 40 45 50

18x14 1.75 1.59 0° 13-22-40 19-29-46 24-36-52 29-40-57 34-43-61 38-46-66 42-52-73 46-57-80 50-61-87 Throw 22.5° 10-17-31 15-22-36 19-28-40 22-31-44 26-34-48 29-36-51 33-40-57 36-44-62 39-48-67

(ft) 45° 6-10-18 9-13-21 11-16-23 13-18-26 15-20-28 17-21-30 19-23-33 21-26-36 23-28-39 cfm 486 648 810 972 1134 1296 1620 1944 2268

NC - 12 19 24 29 33 40 45 50

16x16 1.78 1.62 0° 14-22-41 19-29-47 24-36-52 29-41-57 34-44-62 38-47-66 43-52-74 47-57-81 51-62-88 Throw 22.5° 11-17-31 15-22-36 19-28-41 22-31-44 26-34-48 30-36-51 33-41-57 36-44-63 39-48-68

(ft) 45° 6-10-18 9-13-21 11-16-24 13-18-26 15-20-28 17-21-30 19-24-33 21-26-36 23-28-39 48x6 cfm 546 728 910 1092 1274 1456 1820 2184 2548 36x8 NC - 13 19 25 30 34 40 46 50

24x12 2.00 1.82 0° 14-23-43 20-31-50 26-38-55 31-43-61 36-46-66 41-50-70 45-55-78 50-61-86 54-66-93 18x16 Throw 22.5° 11-18-33 16-24-38 20-30-43 24-33-47 28-36-51 31-38-54 35-43-61 38-47-67 42-51-72

(ft) 45° 6-10-19 9-14-22 12-17-25 14-19-27 16-21-30 18-22-32 20-25-35 22-27-39 24-30-42 cfm 621 828 1035 1242 1449 1656 2070 2484 2898

NC - 13 20 25 30 34 41 46 51

18x18 2.25 2.07 0° 15-25-46 22-33-53 27-41-59 33-46-65 38-49-70 43-53-75 48-59-84 53-65-92 57-70-99 Throw 22.5° 12-19-36 17-25-41 21-32-46 25-36-50 30-38-54 33-41-58 37-46-65 41-50-71 44-54-77

(ft) 45° 7-11-21 10-15-24 12-18-27 15-21-29 17-22-31 19-24-34 22-27-38 24-29-41 26-31-45 cfm 642 856 1070 1284 1498 1712 2140 2568 2996

42x8 NC - 13 20 26 30 34 41 46 51 24x14 2.33 2.14 0° 16-25-47 22-33-54 28-42-60 33-47-66 39-50-71 44-54-76 49-60-85 54-66-93 58-71-101

Throw 22.5° 12-19-36 17-26-42 22-32-47 26-36-51 30-39-55 34-42-59 38-47-66 42-51-72 45-55-78

(ft) 45° 7-11-21 10-15-24 13-19-27 15-21-30 18-23-32 20-24-34 22-27-38 24-30-42 26-32-45 cfm 687 916 1145 1374 1603 1832 2290 2748 3206 36x10 NC - 14 20 26 30 34 41 47 51 30x12 2.50 2.29 0° 16-26-48 23-34-56 29-43-62 34-48-68 40-52-74 45-56-79 51-62-88 56-68-96 60-74-104

Throw 22.5° 12-20-37 18-27-43 22-33-48 27-37-53 31-40-57 35-43-61 39-48-68 43-53-75 47-57-81

(ft) 45° 7-12-22 10-16-25 13-19-28 16-22-31 18-23-33 20-25-35 23-28-40 25-31-43 27-33-47 cfm 738 984 1230 1476 1722 1968 2460 2952 3444 48x8 NC - 14 21 26 31 35 41 47 51

24x16 2.67 2.46 0° 17-27-50 24-36-58 30-45-64 36-50-71 42-54-76 47-58-82 53-64-91 58-71-100 62-76-108 Throw 22.5° 13-21-39 18-28-45 23-35-50 28-39-55 32-42-59 36-45-63 41-50-71 45-55-77 48-59-84

(ft) 45° 8-12-22 11-16-26 13-20-29 16-22-32 19-24-34 21-26-37 24-29-41 26-32-45 28-34-49 cfm 771 1028 1285 1542 1799 2056 2570 3084 3598

NC - 14 21 26 31 35 42 47 52

20x20 2.78 2.57 0° 17-27-51 24-37-59 30-46-66 37-51-72 43-55-78 48-59-83 54-66-93 59-72-102 64-78-110 Throw 22.5° 13-21-40 19-28-46 24-35-51 28-40-56 33-43-60 37-46-65 42-51-72 46-56-79 49-60-85

(ft) 45° 8-12-23 11-16-27 14-21-30 16-23-32 19-25-35 22-27-38 24-30-42 27-32-46 29-35-50 cfm 825 1100 1375 1650 1925 2200 2750 3300 3850

36x12 NC - 15 21 27 31 35 42 47 52 24x18 3.00 2.75 0° 18-28-53 25-38-61 31-47-68 38-53-75 44-57-81 50-61-86 56-68-96 61-75-106 66-81-114

Throw 22.5° 14-22-41 20-29-47 24-37-53 29-41-58 34-44-63 39-47-67 43-53-75 47-58-82 51-63-88

(ft) 45° 8-13-24 11-17-27 14-21-31 17-24-34 20-26-36 22-27-39 25-31-43 27-34-48 30-36-51

Performance notes appear at end of table fort zone. ™

| w w w .titus-hvac.com

H19

H

PERFO

RM

AN

CE D

ATA

PERFORMANCE DATA

MODELS: 300R, 300F, 300R-SS, 300R-HD, 301R, 301F, 301R-SS AND 301R-HD

PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD

NC-20 NC-30 NC-40 NC-50

Core Vel. 300 400 500 600 700 800 1000 1200 1400 Nom. Nom. Core Vel. Press. 0.006 0.010 0.016 0.022 0.031 0.040 0.062 0.090 0.122 Duct Duct Area 0° 0.016 0.029 0.046 0.066 0.090 0.117 0.183 0.263 0.358 Size Area ( ft2 ) Total 22.5° 0.018 0.033 0.051 0.074 0.100 0.131 0.204 0.294 0.401 ( in. ) ( ft2 ) Press. 45° 0.028 0.049 0.077 0.111 0.152 0.198 0.309 0.445 0.606 cfm 933 1244 1555 1866 2177 2488 3110 3732 4354 48x10 NC - 15 22 27 32 36 42 48 52 30x16 3.33 3.11 0° 19-30-56 27-40-65 33-50-72 40-56-79 47-61-86 53-65-92 59-72-103 65-79-112 70-86-121 24x20 Throw 22.5° 15-23-44 21-31-50 26-39-56 31-44-62 36-47-66 41-50-71 46-56-79 50-62-87 54-66-94

(ft) 45° 8-14-25 12-18-29 15-23-33 18-25-36 21-27-39 24-29-41 27-33-46 29-36-51 32-39-55 cfm 942 1256 1570 1884 2198 2512 3140 3768 4396

NC - 15 22 27 32 36 42 48 53

22x22 3.36 3.14 0° 19-30-56 27-40-65 34-50-73 40-56-80 47-61-86 53-65-92 59-73-103 65-80-113 70-86-122 Throw 22.5° 15-23-44 21-31-50 26-39-56 31-44-62 37-47-67 41-50-71 46-56-80 50-62-87 55-67-94

(ft) 45° 8-14-25 12-18-29 15-23-33 18-25-36 21-27-39 24-29-41 27-33-46 29-36-51 32-39-55 cfm 966 1288 1610 1932 2254 2576 3220 3864 4508

42x12 NC - 15 22 27 32 36 43 48 53 36x14 3.50 3.22 0° 19-31-57 27-41-66 34-51-74 41-57-81 48-62-87 54-66-93 60-74-104 66-81-114 71-87-123

Throw 22.5° 15-24-44 21-32-51 26-40-57 32-44-63 37-48-68 42-51-72 47-57-81 51-63-89 55-68-96

(ft) 45° 9-14-26 12-18-30 15-23-33 18-26-36 21-28-39 24-30-42 27-33-47 30-36-51 32-39-56 cfm 1029 1372 1715 2058 2401 2744 3430 4116 4802

NC - 15 22 28 32 36 43 48 53

24x22 3.67 3.43 0° 20-32-59 28-42-68 35-53-76 42-59-83 49-64-90 56-68-96 62-76-108 68-83-118 74-90-127 Throw 22.5° 15-25-46 22-33-53 27-41-59 33-46-65 38-49-70 43-53-75 48-59-83 53-65-91 57-70-99

(ft) 45° 9-14-27 13-19-31 16-24-34 19-27-38 22-29-41 25-31-43 28-34-48 31-38-53 33-41-57 cfm 1050 1400 1750 2100 2450 2800 3500 4200 4900

NC - 16 22 28 32 36 43 48 53

30x18 3.75 3.5 0° 20-32-60 28-43-69 36-53-77 43-60-84 50-64-91 56-69-97 63-77-109 69-84-119 74-91-129 Throw 22.5° 15-25-46 22-33-53 28-41-60 33-46-65 39-50-71 44-53-75 49-60-84 53-65-92 58-71-100

(ft) 45° 9-14-27 13-19-31 16-24-35 19-27-38 22-29-41 25-31-44 28-35-49 31-38-54 33-41-58 cfm 1125 1500 1875 2250 2625 3000 3750 4500 5250

48x12 NC - 16 22 28 33 37 43 49 53 36x16 4.00 3.75 0° 21-33-62 29-44-71 37-55-80 44-62-87 51-67-94 58-71-101 65-80-113 71-87-123 77-94-133 24x24 Throw 22.5° 16-26-48 23-34-55 29-43-62 34-48-68 40-52-73 45-55-78 50-62-87 55-68-96 60-73-103

(ft) 45° 9-15-28 13-20-32 17-25-36 20-28-39 23-30-42 26-32-45 29-36-51 32-39-55 35-42-60 cfm 1266 1688 2110 2532 2954 3376 4220 5064 5908

NC - 16 23 28 33 37 44 49 54

36x18 4.50 4.22 0° 22-35-65 31-47-76 39-59-84 47-65-93 55-71-100 62-76-107 69-84-119 76-93-131 82-100-141 Throw 22.5° 17-27-51 24-36-59 30-45-65 36-51-72 42-55-77 48-59-83 53-65-93 59-72-101 63-77-110

(ft) 45° 10-16-29 14-21-34 18-26-38 21-29-42 25-32-45 28-34-48 31-38-54 34-42-59 37-45-64 cfm 1413 1884 2355 2826 3297 3768 4710 5652 6594

36x20 NC - 17 23 29 33 37 44 50 54 30x24 5.00 4.71 0° 23-37-69 33-49-80 41-62-89 49-69-98 58-75-106 65-80-113 73-89-126 80-98-138 86-106-149

Throw 22.5° 18-29-54 26-38-62 32-48-69 38-54-76 45-58-82 50-62-87 56-69-98 62-76-107 67-82-116

(ft) 45° 10-17-31 15-22-36 19-28-40 22-31-44 26-34-48 29-36-51 33-40-57 36-44-62 39-48-67 cfm 1482 1976 2470 2964 3458 3952 4940 5928 6916

NC - 17 24 29 34 38 44 50 54

42x18 5.25 4.94 0° 24-38-71 34-51-82 42-63-91 51-71-100 59-76-108 67-82-116 75-91-129 82-100-142 88-108-153 Throw 22.5° 18-29-55 26-39-63 33-49-71 39-55-78 46-59-84 52-63-90 58-71-100 63-78-110 68-84-118

(ft) 45° 11-17-32 15-23-37 19-28-41 23-32-45 27-34-49 30-37-52 34-41-58 37-45-64 40-49-69 cfm 1548 2064 2580 3096 3612 4128 5160 6192 7224

NC - 17 24 29 34 38 45 50 55

28x28 5.44 5.16 0° 24-39-72 35-52-84 43-65-93 52-72-102 60-78-110 68-84-118 76-93-132 84-102-145 90-110-156 Throw 22.5° 19-30-56 27-40-65 33-50-72 40-56-79 47-61-86 53-65-92 59-72-102 65-79-112 70-86-121

(ft) 45° 11-17-33 16-23-38 19-29-42 23-33-46 27-35-50 31-38-53 34-42-59 38-46-65 41-50-70 cfm 1653 2204 2755 3306 3857 4408 5510 6612 7714

42x20 NC - 17 24 30 34 38 45 50 55 30x28 5.83 5.51 0° 25-40-75 36-54-86 45-67-96 54-75-106 62-81-114 70-86-122 79-96-136 86-106-149 93-114-161

Throw 22.5° 19-31-58 28-41-67 35-52-75 41-58-82 48-63-88 55-67-95 61-75-106 67-82-116 72-88-125

(ft) 45° 11-18-34 16-24-39 20-30-43 24-34-48 28-36-51 32-39-55 35-43-61 39-48-67 42-51-73 cfm 1698 2264 2830 3396 3962 4528 5660 6792 7924 48x18 NC - 18 24 30 34 38 45 50 55 36x24 6.00 5.66 0° 25-41-76 36-54-87 45-68-98 54-76-107 63-82-116 71-87-124 80-98-138 87-107-152 94-116-164

Throw 22.5° 20-32-59 28-42-68 35-53-76 42-59-83 49-63-90 55-68-96 62-76-107 68-83-117 73-90-127

(ft) 45° 11-18-34 16-24-39 20-31-44 24-34-48 28-37-52 32-39-56 36-44-62 39-48-68 43-52-74 cfm 1782 2376 2970 3564 4158 4752 5940 7128 8316

NC - 18 24 30 34 38 45 51 55

30x30 6.25 5.94 0° 26-42-78 37-56-90 46-69-100 56-78-110 65-84-119 73-90-127 82-100-142 90-110-155 97-119-168 Throw 22.5° 20-32-60 29-43-69 36-54-78 43-60-85 50-65-92 57-69-98 63-78-110 69-85-120 75-92-130

(ft) 45° 12-19-35 17-25-40 21-31-45 25-35-49 29-38-53 33-40-57 37-45-64 40-49-70 44-53-75 de fin e yo ur c om fo rt zo ne w w w .ti tu s-hv ac

.c om

H20

H

PE

RF

O

RM

AN

CE

D

AT

A

PERFORMANCE DATA

MODELS: 300R, 300F, 300R-SS, 300R-HD, 301R, 301F, 301R-SS AND 301R-HD

PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD

NC-20 NC-30 NC-40 NC-50

Core Vel. 300 400 500 600 700 800 1000 1200 1400 Nom. Nom. Core Vel. Press. 0.006 0.010 0.016 0.022 0.031 0.040 0.062 0.090 0.122 Duct Duct Area 0° 0.016 0.029 0.046 0.066 0.090 0.117 0.183 0.263 0.358 Size Area ( ft2 ) Total 22.5° 0.018 0.033 0.051 0.074 0.100 0.131 0.204 0.294 0.401 ( in. ) ( ft2 ) Press. 45° 0.028 0.049 0.077 0.111 0.152 0.198 0.309 0.445 0.606 cfm 1998 2664 3330 3996 4662 5328 6660 7992 9324 42x24 NC - 18 25 30 35 39 46 51 56 36x28 7.00 6.66 0° 28-44-82 39-59-95 49-74-106 59-82-116 69-89-126 77-95-134 87-106-150 95-116-164 102-126-178

Throw 22.5° 21-34-64 30-46-74 38-57-82 46-64-90 53-69-97 60-74-104 67-82-116 74-90-127 79-97-138

(ft) 45° 12-20-37 18-26-43 22-33-48 26-37-52 31-40-56 35-43-60 39-48-68 43-52-74 46-56-80 cfm 2004 2672 3340 4008 4676 5344 6680 8016 9352

NC - 18 25 30 35 39 46 51 56

46x22 7.03 6.68 0° 28-44-82 39-59-95 49-74-106 59-82-116 69-89-126 78-95-134 87-106-150 95-116-165 103-126-178 Throw 22.5° 21-34-64 30-46-74 38-57-82 46-64-90 53-69-97 60-74-104 67-82-116 74-90-128 80-97-138

(ft) 45° 12-20-37 18-27-43 22-33-48 27-37-52 31-40-57 35-43-60 39-48-68 43-52-74 46-57-80 cfm 2034 2712 3390 4068 4746 5424 6780 8136 9492

NC - 18 25 30 35 39 46 51 56

32x32 7.11 6.78 0° 28-45-83 40-59-96 49-74-107 59-83-117 69-90-127 78-96-135 87-107-151 96-117-166 103-127-179 Throw 22.5° 22-34-64 31-46-74 38-57-83 46-64-91 54-69-98 61-74-105 68-83-117 74-91-129 80-98-139

(ft) 45° 12-20-37 18-27-43 22-33-48 27-37-53 31-40-57 35-43-61 39-48-68 43-53-75 47-57-81 cfm 2148 2864 3580 4296 5012 5728 7160 8592 10024

NC - 19 25 31 35 39 46 51 56

36x30 7.50 7.16 0° 29-46-85 41-61-98 51-76-110 61-85-121 71-92-130 80-98-139 90-110-156 98-121-170 106-130-184 Throw 22.5° 22-35-66 32-47-76 39-59-85 47-66-93 55-71-101 62-76-108 70-85-121 76-93-132 82-101-143

(ft) 45° 13-21-38 18-27-44 23-34-50 27-38-54 32-41-59 36-44-63 40-50-70 44-54-77 48-59-83 cfm 2289 3052 3815 4578 5341 6104 7630 9156 10682

48x24 NC - 19 25 31 35 39 46 52 56 36x32 8.00 7.63 0° 29-47-88 42-63-102 52-79-114 63-88-124 73-95-134 83-102-144 93-114-161 102-124-176 110-134-190

Throw 22.5° 23-37-68 33-49-79 41-61-88 49-68-96 57-74-104 64-79-111 72-88-124 79-96-136 85-104-147

(ft) 45° 13-21-40 19-28-46 24-35-51 28-40-56 33-43-60 37-46-65 42-51-72 46-56-79 49-60-86 cfm 2304 3072 3840 4608 5376 6144 7680 9216 10752

NC - 19 25 31 36 40 46 52 56

34x34 8.03 7.68 0° 30-47-88 42-63-102 53-79-114 63-88-125 74-95-135 83-102-144 93-114-161 102-125-176 110-135-191 Throw 22.5° 23-37-68 33-49-79 41-61-88 49-68-97 57-74-104 64-79-112 72-88-125 79-97-137 85-104-148

(ft) 45° 13-21-40 19-28-46 24-36-51 28-40-56 33-43-61 37-46-65 42-51-73 46-56-79 50-61-86 cfm 2442 3256 4070 4884 5698 6512 8140 9768 11396

NC - 19 26 31 36 40 46 52 56

36x34 8.50 8.14 0° 30-49-91 43-65-105 54-81-117 65-91-128 76-98-139 86-105-148 96-117-166 105-128-182 113-139-196 Throw 22.5° 24-38-70 34-50-81 42-63-91 50-70-100 59-76-108 66-81-115 74-91-129 81-100-141 88-108-152

(ft) 45° 14-22-41 20-29-47 24-37-53 29-41-58 34-44-62 39-47-67 43-53-75 47-58-82 51-62-88 cfm 2514 3352 4190 5028 5866 6704 8380 10056 11732

NC 11 19 26 31 36 40 47 52 57

42x30 8.75 8.38 0° 31-49-92 44-66-106 55-82-119 66-92-130 77-100-141 87-106-151 97-119-168 106-130-184 115-141-199 Throw 22.5° 24-38-71 34-51-82 43-64-92 51-71-101 60-77-109 67-82-117 75-92-130 82-101-143 89-109-154

(ft) 45° 14-22-41 20-30-48 25-37-54 30-41-59 35-45-63 39-48-68 44-54-76 48-59-83 52-63-90 cfm 2589 3452 4315 5178 6041 6904 8630 10356 12082

NC 11 19 26 31 36 40 47 52 57

36x36 9.00 8.63 0° 31-50-94 45-67-108 56-84-121 67-94-132 78-101-143 88-108-153 99-121-171 108-132-187 117-143-202 Throw 22.5° 24-39-72 35-52-84 43-65-94 52-72-103 61-78-111 68-84-118 76-94-132 84-103-145 90-111-157

(ft) 45° 14-23-42 20-30-49 25-38-54 30-42-60 35-45-64 40-49-69 44-54-77 49-60-84 53-64-91 cfm 2880 3840 4800 5760 6720 7680 9600 11520 13440

42x34 NC 11 20 26 32 36 40 47 53 57 48x30 10.00 9.6 0° 33-53-99 47-71-114 59-88-127 71-99-140 82-107-151 93-114-161 104-127-180 114-140-197 123-151-213

Throw 22.5° 26-41-76 36-55-88 46-68-99 55-76-108 64-83-117 72-88-125 81-99-140 88-108-153 95-117-165

(ft) 45° 15-24-44 21-32-51 26-40-57 32-44-63 37-48-68 42-51-73 47-57-81 51-63-89 55-68-96 cfm 2892 3856 4820 5784 6748 7712 9640 11568 13496

NC 11 20 26 32 36 40 47 53 57

38x38 10.03 9.64 0° 33-53-99 47-71-114 59-88-128 71-99-140 83-107-151 93-114-161 104-128-181 114-140-198 123-151-214 Throw 22.5° 26-41-77 37-55-88 46-69-99 55-77-108 64-83-117 72-88-125 81-99-140 88-108-153 96-117-166

(ft) 45° 15-24-44 21-32-51 27-40-57 32-44-63 37-48-68 42-51-73 47-57-81 51-63-89 55-68-96 cfm 3030 4040 5050 6060 7070 8080 10100 12120 14140

NC 11 20 27 32 37 41 47 53 57

42x36 10.50 10.1 0° 34-54-101 48-72-117 60-91-131 72-101-143 85-109-155 95-117-165 107-131-185 117-143-202 126-155-219 Throw 22.5° 26-42-78 37-56-91 47-70-101 56-78-111 65-85-120 74-91-128 83-101-143 91-111-157 98-120-169

(ft) 45° 15-24-46 22-33-53 27-41-59 33-46-64 38-49-70 43-53-74 48-59-83 53-64-91 57-70-98 cfm 3135 4180 5225 6270 7315 8360 10450 12540 14630

NC 11 20 27 32 37 41 47 53 58

46x34 10.86 10.45 0° 34-55-103 49-74-119 61-92-133 74-103-146 86-111-157 97-119-168 109-133-188 119-146-206 128-157-222 Throw 22.5° 27-43-80 38-57-92 48-71-103 57-80-113 67-86-122 75-92-130 84-103-146 92-113-160 99-122-172

(ft) 45° 16-25-46 22-33-53 28-41-60 33-46-66 39-50-71 44-53-76 49-60-85 53-66-93 58-71-100 fort zone. ™

| w w w .titus-hvac.com

H21

H

PERFO

RM

AN

CE D

ATA

PERFORMANCE DATA

MODELS: 300R, 300F, 300R-SS, 300R-HD, 301R, 301F, 301R-SS AND 301R-HD

PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD

NC-20 NC-30 NC-40 NC-50

Nom.

Duct Size ( in. )

Nom.

Duct Area ( ft2 )

Core Vel. 300 400 500 600 700 800 1000 1200 1400 Core Vel. Press. 0.006 0.010 0.016 0.022 0.031 0.040 0.062 0.090 0.122 Area 0° 0.016 0.029 0.046 0.066 0.090 0.117 0.183 0.263 0.358 ( ft2 ) Total 22.5° 0.018 0.033 0.051 0.074 0.100 0.131 0.204 0.294 0.401

Press. 45° 0.028 0.049 0.077 0.111 0.152 0.198 0.309 0.445 0.606 cfm 3201 4268 5335 6402 7469 8536 10670 12804 14938

NC 12 20 27 32 37 41 48 53 58

42x38 11.08 10.67 0° 35-56-104 50-74-120 62-93-134 74-104-147 87-112-159 98-120-170 110-134-190 120-147-208 130-159-225 Throw 22.5° 27-43-81 38-58-93 48-72-104 58-81-114 67-87-123 76-93-132 85-104-147 93-114-161 101-123-174

(ft) 45° 16-25-47 22-34-54 28-42-60 34-47-66 39-51-71 44-54-76 49-60-85 54-66-94 58-71-101 cfm 3210 4280 5350 6420 7490 8560 10700 12840 14980

NC 12 20 27 32 37 41 48 53 58

40x40 11.11 10.7 0° 35-56-104 50-75-120 62-93-134 75-104-147 87-113-159 98-120-170 110-134-190 120-147-208 130-159-225 Throw 22.5° 27-43-81 39-58-93 48-72-104 58-81-114 67-87-123 76-93-132 85-104-147 93-114-161 101-123-174

(ft) 45° 16-25-47 22-34-54 28-42-61 34-47-66 39-51-72 44-54-77 49-61-86 54-66-94 58-72-101 cfm 3471 4628 5785 6942 8099 9256 11570 13884 16198

NC 12 21 27 33 37 41 48 53 58

48x36 12.00 11.57 0° 36-58-108 52-78-125 65-97-140 78-108-153 90-117-165 102-125-177 114-140-198 125-153-217 135-165-234 Throw 22.5° 28-45-84 40-60-97 50-75-108 60-84-119 70-91-128 79-97-137 88-108-153 97-119-168 105-128-181

(ft) 45° 16-26-49 23-35-56 29-44-63 35-49-69 41-53-74 46-56-80 51-63-89 56-69-97 61-74-105 cfm 3546 4728 5910 7092 8274 9456 11820 14184 16548

NC 12 21 27 33 37 41 48 53 58

42x42 12.25 11.82 0° 37-59-109 52-78-126 65-98-141 78-109-155 91-118-167 103-126-179 115-141-200 126-155-219 137-167-236 Throw 22.5° 28-46-85 40-61-98 51-76-110 61-85-120 71-92-130 80-98-139 89-110-155 98-120-170 106-130-183

(ft) 45° 16-26-49 24-35-57 29-44-64 35-49-70 41-53-75 46-57-80 52-64-90 57-70-99 61-75-106 cfm 3897 5196 6495 7794 9093 10392 12990 15588 18186

NC 12 21 28 33 38 42 48 54 58

44x44 13.44 12.99 0° 38-62-115 55-82-133 68-103-148 82-115-162 96-124-175 108-133-187 121-148-210 133-162-230 143-175-248 Throw 22.5° 30-48-89 42-64-103 53-80-115 64-89-126 74-96-136 84-103-145 94-115-162 103-126-178 111-136-192

(ft) 45° 17-28-52 25-37-60 31-46-67 37-52-73 43-56-79 49-60-84 54-67-94 60-73-103 64-79-112 cfm 4062 5416 6770 8124 9478 10832 13540 16248 18956

NC 13 21 28 33 38 42 49 54 59

48x42 14.00 13.54 0° 39-63-117 56-84-135 70-105-151 84-117-166 98-127-179 110-135-191 124-151-214 135-166-234 146-179-253 Throw 22.5° 30-49-91 43-65-105 54-81-117 65-91-128 76-98-139 86-105-148 96-117-166 105-128-182 113-139-196

(ft) 45° 18-28-53 25-38-61 31-47-68 38-53-75 44-57-81 50-61-86 56-68-96 61-75-105 66-81-114 cfm 4266 5688 7110 8532 9954 11376 14220 17064 19908

NC 13 21 28 33 38 42 49 54 59

46x46 14.69 14.22 0° 40-64-120 57-86-139 72-107-155 86-120-170 100-130-183 113-139-196 127-155-219 139-170-240 150-183-259 Throw 22.5° 31-50-93 44-67-107 56-83-120 67-93-132 78-101-142 88-107-152 98-120-170 107-132-186 116-142-201

(ft) 45° 18-29-54 26-39-62 32-48-70 39-54-76 45-58-83 51-62-88 57-70-99 62-76-108 67-83-117 cfm 4455 5940 7425 8910 10395 11880 14850 17820 20790

NC 13 22 28 34 38 42 49 54 59

48x46 15.33 14.85 0° 41-66-123 59-88-142 73-110-158 88-123-174 102-133-187 116-142-200 129-158-224 142-174-245 153-187-265 Throw 22.5° 32-51-95 45-68-110 57-85-123 68-95-134 79-103-145 90-110-155 100-123-174 110-134-190 119-145-205

(ft) 45° 18-30-55 26-40-64 33-49-71 40-55-78 46-60-84 52-64-90 58-71-101 64-78-110 69-84-119 cfm 4650 6200 7750 9300 10850 12400 15500 18600 21700

NC 13 22 28 34 38 42 49 55 59

48x48 16.00 15.50 0° 42-67-125 60-90-145 75-112-162 90-125-177 105-135-192 118-145-205 132-162-229 145-177-251 156-192-271 Throw 22.5° 33-52-97 46-70-112 58-87-125 70-97-137 81-105-148 92-112-159 102-125-177 112-137-194 121-148-210

(ft) 45° 19-30-56 27-40-65 34-50-73 40-56-80 47-61-86 53-65-92 59-73-103 65-80-113 70-86-122

• 0°, 22.5° & 45° represent blade deflection angles

• Performance data is based on duct sizes in bold, the performance varies slightly for duct sizes not shown in bold

• See the section, Engineering Guidelines, for drop information when selecting larger supply grilles for cooling purposes

• See the “Performance Notes” portion in this section for notes and correction factors

• See the section, Engineering Guidelines, for catalog throw information

• Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts de fin e yo ur c om fo rt zo ne w w w .ti tu s-hv ac

.c om

H22

H

PE

RF

O

RM

AN

CE

D

AT

A

PERFORMANCE DATA

PERFORMANCE NOTES

• Performance data includes damper

• Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006

• All pressures are in inches of water

• Core velocities are in feet per minute

• Throw values given are for isothermal terminal velocities of 150, 100 and 50 fpm

• Each NC value represents the noise criterion curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7. Each NC value is based on a room absorption of 10 dB, re 10-12 watts. Each NC value is further based on grille operating at a 0° deflection. Settings of 22½° or 45°, increase the stated sound levels by 1 or 7 NC, respectively.

• Bold dividing lines on H17-H21 denote ranges of NC values

• The stated deflection settings refer to the horizontal setting of the blade’s deflection angle. For a 20° upward deflection, use the throw rating for the 0° setting and the total pressure for the 22½° horizontal setting.

• Dash (—) in space indicates NC value less than 10

• For additional information concerning drop and throw, see the Engineering Guidelines section of this catalog

VARIABLE AIR VOLUME

APPLICATIONS

All Titus supply grilles can be applied to variable air volume systems with excellent results. For detailed selection methods, consult your Titus representative or the Engineering Guidelines section of this catalog.

Correction Factors for 300/301 Supply Grilles

Model Damper Ak /Ac Throw Total Pressure NC

300R, 300F With 0.77 1.00 1.00 0

301R, 301F Without 0.82 0.98 0.88 -2

Note: Throw and total pressure corrections are multipliers. The NC correction is an addition. Ak is the flow factor. Ac is the core area from the main table.

Drop Versus Throw Showing Ceiling Effect - 20°F DT Cooling

(Side view of air jet leaving wall mounted grille)

Drop Versus Throw without Ceiling Effect

(Side view of air jet leaving wall mounted grille)

50 40 30 20 10 0

Throw, Ft.

D ro p, F t.

2000 CFM

TYPICAL 100 fpm ENVELOPE

500 1000

100 CFM

1500 fpm JET VELOCITY

300 fpm

JET VELOCITY

50 40 30 20 10 0

Throw, Ft.

D ro p, F t.

100 CFM

2000 CFM

TYPICAL 100 fpm ENVELOPE

300 fpm

JET VELOCITY

1500 fpm JET VELOCITY fort zone. ™

| w w w .titus-hvac.com

H23

H

PERFO

RM

AN

CE D

ATA

PERFORMANCE DATA

HORIZONTAL DEFLECTION (SPREAD)

SUPPLY GRILLES

The figures depicting deflection, throw and drop are based on actual tests conducted by Titus. They show the relationship of spread to throw for a typical high side-wall supply outlet selection.

Notice the outer shaded area represents the 50 fpm isovel, the white area, the 100 fpm isovel, and the inner area, the 150 fpm isovel.

The spread angle also affects the airstream drop amount. Always consider for any given temperature, volume and core velocity; the wider spread results in a smaller drop. See section, Engineering Guidelines, for more drop, throw and spread relationship information.

Titus grilles can be selected with a single set of blades for adjusting either horizontal or vertical deflection, or with two sets of blades for adjusting both horizontal and vertical deflections.

0B Horizontal Deflection

Spread versus throw at 0° horizontal deflection angle (Plan view of air jet leaving wall mounted grille).

22½B Horizontal Deflection

Spread versus throw at 22½° horizontal deflection angle (Plan view of air jet leaving wall mounted grille).

45B Horizontal Deflection

Spread versus throw at 45° horizontal deflection angle (Plan view of air jet leaving wall mounted grille).

50 fpm

Typical 100 fpm Envelope

150 fpm

SP

R

EA

D

, F

EE

T

0 10 20 30 40 50

THROW, FEET

DEFLECTION

50 fpm

Typical 100 fpm Envelope

SP

R

EA

D

, F

EE

T

0 10 20 30 40

THROW, FEET

22 1 / 2

DEFLECTION

22 1 / 2

22 1 / 2

150 fpm

SP

R

EA

D

, F

EE

T

0 5 10 15 20 25

THROW, FEET

DEFLECTION

50 fpm

Typical 100 fpm Envelope

150 fpm

ERVe-20-30L Unit Performance

Design Conditions

Elevation (ft) Summer

Winter DB (F) Outdoor Air

(CFM)

Exhaust Air

(CFM)DB (F) WB (F)

30 95.0 76.0 3.0 1,940 1,900

Unit Specifications

Qty Weight (lb) Unit Installation Unit ETL Listing

1 922 (+/- 5%) Outdoor UL\cUL 1995

Configuration

Outdoor Air Exhaust Air

Intake Discharge Intake Discharge

End Bottom Bottom Side

Energy Recovery Performance

Design Condition

Temperature (F) Capacity Reduction

(BTU/h) Outdoor Air Supply Air Return Air Exhaust Air

DB WB DB WB DB WB DB WB

Summer 95.0 76.0 79.8 66.5 75.0 62.5 90.5 73.0 74,205.0

Winter 3.0 1.3 54.3 43.5 70.0 52.9 17.7 16.4 108,379.0

Air Performance

Type Total Volume

(CFM)

External SP

(in. wg) Total SP

(in. wg)

FRPM

Fan

Qty Type Drive-Type

Supply 1,940 1 1.476 1683 1 Forward Curve Belt

Exhaust 1,900 1 1.248 1576 1 Forward Curve Belt

Motor Specifications

Motor Qty Operating Power (hp)

Size (hp) Enclosure Efficiency RPM

Supply 1 1.31 2 ODP PE 1725

Exhaust 1 1.14 1-1/2 ODP PE 1725

Electrical Specifications

Power Supply Rating (V/C/P) MCA (A) MOP (A)

Unit 208/60/3 16.6 20.0

12/17/2018Printed Date:

Hai Ly - ERVEJob:

ERVEMark:

ERVe-20-30LModel:

Generated by: DLees@buckleyonline.com CAPS 4.28.1254 C:\Users\dlees\Desktop\Hai Ly - ERVE.gfcj Page 1 of 16 jweeks

Building 22 ERU-1

CONSTRUCTION FEATURES AND ACCESSORIES

Unit

UL-1995 Std

Unit Installation - Outdoor Std

Energy Recovery Device - Polymer Wheel w/ Silica Gel Desiccant

Std

Unit Construction - Double Wall X

Insulation - 1 inch 3# R4 fiberglass Std

Corrosion Resistant Fasteners Std

Hinged Access Std

Factory Wired Non-Fused Disconnect Switch Std

Two Direct Drive Forward Curved Blower and Motor Assemblies

Unit Finish - Permatector X

Fan VFDs - Modulating X

Single Point Power Std

Disconnected Switch, non-fused Std

Controls

Network Interface

Network Protocol

Energy Wheel Economizer Control

Exhaust Only Operation

Rotation Sensor

Remote Panel

Control Accessories

Remote Display

Room Sensing

CO2 Sensor

Dirty Filter Sensor(s) - Both X

Wheel Rotation Sensor

Accessories

Frost Control - Timed Exhaust X

Roof Curb - GKD - 40.35/61.1-G14 X

Outdoor Air Filters - 2" MERV 8, 2-20x20 Std

Exhaust Air Filters - 2" MERV 8, 2-20x20 Std

Outdoor Air Damper - Low Leakage X

Return Air Damper

Damper End Switch

Service Outlet

Spare Filters

Spare Energy Wheel Belt

Spare Energy Wheel Segments

Spare Fan Belts

Warranty Options

Unit Warranty - 1 Yr Std

Energy Wheel Warranty - 5 Yrs Less Motor Std

Standard Option Std

Not Included

Included X

Notes

Outdoor Air Damper(s) supplied are low leakage, motorized VCD-23 (leakage rate of 3 CFM / ft^2 @ 1 in. wg), Class 1A

12/17/2018Printed Date:

Hai Ly - ERVEJob:

ERVEMark:

ERVe-20-30LModel:

Generated by: DLees@buckleyonline.com CAPS 4.28.1254 C:\Users\dlees\Desktop\Hai Ly - ERVE.gfcj Page 2 of 16

Supply Fan Charts And Performance

Supply Fan Performance

Total Volume

(CFM)

External SP

(in. wg)

Total SP

(in. wg)

RPM

Operating Power (hp)

Motor Fan

Qty Size (hp)

Qty Type Drive-Type

1,940 1 1.476 1683 1.31 1 2 1 Forward Curve Belt

Pressure Drop (in. wg)

Weatherhood Filter Damper External Total

0.261 0.178 0.036 1 1.476

Sound Performance in Accordance with AMCA

Sound Power by Octave Band Lwa dBA Sones

62.5 125 250 500 1000 2000 4000 8000

75.3 70.9 63.9 58.1 62.4 62.5 61 55.6 68.4 56.9 8.8

Supply Fan

12/17/2018Printed Date:

Hai Ly - ERVEJob:

ERVEMark:

ERVe-20-30LModel:

CAPS 4.28.1254 C:\Users\dlees\Desktop\Hai Ly - ERVE.gfcj Page 3 of 16

Exhaust Fan Charts And Performance

Exhaust Fan Performance

Total Volume

(CFM)

External SP

(in. wg)

Total SP

(in. wg)

RPM

Operating Power (hp)

Motor Fan

Qty Size (hp)

Qty Type Drive-Type

1,900 1 1.248 1576 1.14 1 1-1/2 1 Forward Curve Belt

Pressure Drop (in. wg)

Weatherhood Filter Damper External Total

0.077 0.171 - 1 1.248

Sound Performance in Accordance with AMCA

Sound Power by Octave Band Lwa dBA Sones

62.5 125 250 500 1000 2000 4000 8000

73.4 69.1 62.3 57.5 61.7 61.6 60 54.8 67.5 56 8.2

Exhaust Fan

12/17/2018Printed Date:

Hai Ly - ERVEJob:

ERVEMark:

ERVe-20-30LModel:

CAPS 4.28.1254 C:\Users\dlees\Desktop\Hai Ly - ERVE.gfcj Page 4 of 16

Energy Recovery Summer Performance

Outdoor Air Supply Air

Dry Bulb (F) 95.0 Dry Bulb (F) 79.8

Wet Bulb (F) 76.0 Wet Bulb (F) 66.5

Specific Humidity

(gr/lb)

105 Specific Humidity

(gr/lb)

Enthalpy (BTU/lb) 39.4 Enthalpy (BTU/lb) 30.9

Exhaust Air Return Air

Dry Bulb (F) 90.5 Dry Bulb (F) 75.0

Wet Bulb (F) 73.0 Rel. Humidity (%) 50

Specific Humidity

(gr/lb)

73 Specific Humidity

(gr/lb)

Enthalpy (BTU/lb) 36.8 Enthalpy (BTU/lb) 28.1

Design Air Flow Conditions

Model

OA

Volume

(CFM)

OA Wheel Enthalpy Recovery

Ratio

EA

Volume

(CFM)

EA Wheel Effectiveness

ERVe-20-30L 1,940 75.1 1,900 76.7

Outdoor Air Cooling Reduction

OA Load w/o Energy Recovery

OA Load with Energy Recovery

Equipment Reduction

(tons)(BTU/h) (tons) (BTU/h) (tons)

98,649.0 8.22 24,444.0 2.04 6.18

12/17/2018Printed Date:

Hai Ly - ERVEJob:

ERVEMark:

ERVe-20-30LModel:

CAPS 4.28.1254 C:\Users\dlees\Desktop\Hai Ly - ERVE.gfcj Page 5 of 16

Energy Recovery Winter Performance

Outdoor Air Supply Air

Dry Bulb (F) 3.0 Dry Bulb (F) 54.3

Wet Bulb (F) 1.3 Wet Bulb (F) 43.5

Specific Humidity

(gr/lb)

3 Specific Humidity

(gr/lb)

Enthalpy (BTU/lb) 1.2 Enthalpy (BTU/lb) 17.1

Exhaust Air Return Air

Dry Bulb (F) 17.7 Dry Bulb (F) 70.0

Wet Bulb (F) 16.4 Rel. Humidity (%) 30

Specific Humidity

(gr/lb)

11 Specific Humidity

(gr/lb)

Enthalpy (BTU/lb) 5.7 Enthalpy (BTU/lb) 21.9

Design Air Flow Conditions

Model

OA

Volume

(CFM)

OA Wheel Enthalpy Recovery

Ratio

EA

Volume

(CFM)

EA Wheel Effectiveness

ERVe-20-30L 1,940 76.8 1,900 78.4

Outdoor Air Heating Reduction

OA Load w/o Energy Recovery (BTU/h)

OA Load with Energy Recovery (BTU/h)

Equipment Reduction

(BTU/h)

141,548.0 33,169.0 108,379.0

12/17/2018Printed Date:

Hai Ly - ERVEJob:

ERVEMark:

ERVe-20-30LModel:

CAPS 4.28.1254 C:\Users\dlees\Desktop\Hai Ly - ERVE.gfcj Page 6 of 16

AHRI Performance Data

AHRI Specifications

Model Trademark Type Tilt Angle

(Heating/Cooling) Pressure Drop

(in. wg) Nominal

Airflow(CFM)

ERVe-20-30L Greenheck Wheel N / A Deg 1 2,200

Wheel Leakage Ratings

Pressure Differential Exhaust Air

Transfer Ratio Outdoor Air

Correction Factor Purge Angle / Setting

Test #1 0.0 2.4 1.03 NA

Test #2 0.5 0.8 1.07 2

Test #3 1.0 0.9 1.08 1

Optional Additional Test(s)

Thermal Effectiveness Ratings at 0.0 in. Differential Pressure

Sensible Latent Total

100% Airflow Heating Condition 74 71 73

75% Airflow Heating Condition 79 75 78

100% Airflow Cooling Condition 74 71 73

75% Airflow Cooling Condition 79 75 77

Net thermal Effectiveness Ratings at 0.0 in. Differential Pressure

Net Sensible Net Latent Net Total

100% Airflow Heating Condition 74 71 73

75% Airflow Heating Condition 79 75 78

100% Airflow Cooling Condition 74 71 73

75% Airflow Cooling Condition 79 75 77

Notes

Energy Recovery component certified in accordance with ARI Standard 1060-2001. Actual performance in packaged equipment may vary.

12/17/2018Printed Date:

Hai Ly - ERVEJob:

ERVEMark:

ERVe-20-30LModel:

CAPS 4.28.1254 C:\Users\dlees\Desktop\Hai Ly - ERVE.gfcj Page 7 of 16

System EER Analysis

Recovery Efficiency of Energy Wheel

Recovery Efficiency Ratio (RER) Energy Recovery Coefficient of Performance (ER COP)

69.34 20.32

Energy Efficiency of System

Unitary Net Cooling (tons) Equipment EER

2.50 11

Combined Efficiency (CEF) 27.32

Notes

These calculations, per ARI Guideline V-2003, should be used to assist the designer in calculating the energy efficiency impact of applied energy recovery ventilation equipment.

Recovery Efficiency Ratio (RER): The ratio of energy recovered by the energy recovery wheel to the energy expended in the recovery process.

Energy Efficiency Ratio (EER): The ratio of the cooling capacity in Btu/h to the power input of air conditioning equipment. This number is given by the unitary or condensing unit manufacturer.

Coefficient of Performance (COP): A ratio of the cooling / heating capacity in watts [W] to the power input values in watts[W].

Combined Efficiency (CEF): The efficiency of a system combining an ERV component with a unitary…