HILL ROM SPEC- RFI RESPONSE.pdf

The Audio Station Bed Connector (ASBC) connects to a Standard Room Station (SRS) or Graphical Room Station (GRS-5 or GRS-7) in a patient's room and provides connectors for beds, pillow speakers, and auxiliary equipment.

GENERAL CHARACTERISTICS

• A 20-pin connection for a pillow speaker

• A 37-pin connection for a bed

• A 1/4" jack for auxiliary equipment or call cord

FUNCTIONS

Connects a pillow speaker, a SideCom ® unit, and an auxiliary device simultaneously.

DIMENSIONS

Height 4 1/2"

Depth 1/2"

Width 2 3/4"

Shipping Weight .65 lbs

CONNECTIONS

RJ45 For connecting the ASBC to a room station

Equipment alarm connection For ancilary hospital equipment, such as a ventilator or IV pump

14-pin connector For lighting and entertainment wiring

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written warranty extended on the sale or rental of its products.

© 2021 Hill-Rom Services, Inc. ALL RIGHTS RESERVED. LAB01175 Rev 34 ENG – US

Voalte ® Nurse Call Audio Station Bed Connector (ASBC)

BACKBOX REQUIREMENTS

The ASBC must be mounted in a back box that is 2.5” deep, minimum. A back box that is 3.5” deep may be required for a standalone ASBC. Make sure the backbox space is big enough to accommodate two CAT5/5e/6 cables as well as the wiring and splices for entertainment and lighting connections, as needed.

For bed locator and headwall installations, use the chase or adjacent box to accommodate cables and splices.

1 standalone ASBC New construction: 4" square box with a 1-gang mud ring Renovation: 1-gang box

GRS-5, GRS-7. or SRS with 1 adjacent ASBC 4-gang box

GRS-5, GRS-7, or SRS with 2 adjacent ASBCs 7-gang box

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written warranty extended on the sale or rental of its products.

© 2021 Hill-Rom Services, Inc. ALL RIGHTS RESERVED. LAB01175 Rev 34 ENG – US

Voalte ® Nurse Call Audio Station Bed Connector (ASBC)

Voalte® Nurse Call Dome Light/Zone Light

Dome Lights are located outside patient rooms and in other strategic locations. They are mounted to the wall or the ceiling to provide a visual (and optional audible) signal of events in a specific room or area.

CONFIGURATIONS

Dome Lights are specific to events occuring in a patient room. Dome Lights can also be configured as Zone Lights to indicate events occuring in a specified zone, such as a ward, hallway, or group of rooms.

MOUNTING ORIENTATIONS

Dome Lights can be mounted in three ways:

• Standalone, vertically

• Standalone, horizontally

• Adjacent to a Room Control Board (RCB), vertically

DIMENSIONS

Height 7.6"

Depth 3.6"

Width 3"

Shipping weight 1.4 lbs

CONNECTIONS

Dome Lights have one RJ45 for connecting to an RCB.

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written warranty extended on the sale or rental of its products.

© 2021 Hill-Rom Services, Inc. ALL RIGHTS RESERVED. LAB01175 Rev 34 ENG – US

Dome Light/Zone Light

BACKBOX REQUIREMENTS

Dome Lights must be mounted in a backbox that is 3.5” deep, minimum.

1 standalone Dome Light 1-gang box

RCB with adjacent Dome Light 3-gang box

NOTE: A 2-gang to 1-gang adapter plate can be used for retro-fitting, though a 1-gang box is preferred.

Standalone Dome Light, Standalone Dome Light, vertically-mounted Dome Light adjacent to RCB horizontally-mounted

ELECTRICAL

Input voltage (nominal) 5VDC

Power (nominal) 3W

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

Graphical Room Station 7 (GRS-7)

The Graphical Room Station 7 (GRS-7) is a user interactive, multi-functional call device that is used by patients and caregivers to place voice calls, request assistance, or trigger a Code alert within a nursing unit. The GRS-7 has a 7” graphical touch screen interface and can be installed in headwalls. Optionally, it can also be installed with Audio Station Bed Connectors (ASBC) to provide additional functionality.

CONFIGURATIONS

The GRS-7 can be configured as the following room station types:

• Patient Station - installed in patient rooms with ASBCs

• Staff Station - installed outside of patient rooms and allows staff to place calls

• Duty Station - staff station configured to notify of nurse call within the unit via audible tones

• Visitor Station - same as the staff station except configured to allow visitors to place calls

DIMENSIONS

Height 6.4" (163 mm )

Depth (from wall) 1.7" (43 mm )

Width 9.6" (243 mm )

Shipping Weight 4.3 lbs

ELECTRICAL

Input voltage (nominal) 36VDC

Power (nominal) 4.5W

CONNECTIONS

6 RJ45s 1 for connecting to the RCB

4 for connecting 2 ASBCs (2 ports per ASBC)

1 open port (for future use)

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

HARDWARE SPECIFICATIONS

Processor i.MX6

Processor speed 700 Mhz

Memory controller Embedded, with 512 MB DDR3L RAM

Storage 8GB eMMC NVM

Display 7” WVGA 800x480 LCD Touch Screen

OS Yocto Embedded Linux

Applications C+ + Embedded Linux

BACKBOX REQUIREMENTS

The GRS-7 must be mounted in a gang box that is at least 2.5" deep, minimum.

Standalone 2- or 3-gang box

1 adjacent ASBC 5-gang box

2 adjacent ASBCs

7-gang box

5-gang box + 2 1-gang boxes

5-gang box + 1 1-gang box

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written warranty extended on the sale or rental of its products.

© 2021 Hill-Rom Services, Inc. ALL RIGHTS RESERVED. LAB01175 Rev 34 ENG – US

Graphical Room Station 7 (GRS-7)

Graphical Room Station 10H (GRS-10H)

The Graphical Room Station 10H (GRS-10H) is a user-interactive device used by the nursing staff to communicate with patient rooms. The GRS-10H has a 10.1” graphical display and is not headwall-installable. A GRS-10H can be wall-mounted or desktop-mounted.

CONFIGURATIONS

The GRS-10H can be configured as the following room station types:

• Staff Console - attached to a stand and placed on a desk at a nurse station or other central location. The Staff Console is connected to a handset attached to the left side of the console.

• Staff Station - installed outside of patient rooms and provides almost exact functionality of the Staff Console.

FEATURES

• Lightbar

• Captive Touch High-resolution screen

• USB and Bluetooth headset support

DIMENSIONS

Desk-mounted

Height: 11.5" (fully upright)

Device depth: 2.0"

Base Depth: 7.5"

Width: 12.8"

Wall-mounted

Height: 10.5"

Depth: 2.0"

Width: 12.8"

Shipping Weight 11.46 lbs

CABLE REQUIREMENTS

Requires 2 homerun cables per installation

Does not require a grounding kit for desk-mount installations

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written warranty extended on the sale or rental of its products.

ELECTRICAL

Input voltage (nominal) 36 VDC (connected to RCB) or 48VDC (connected to PoE, Delta switch low power port only)

Power (nominal) 8W (when powered from PoE)

HARDWARE SPECIFICATIONS

Processor i.MX6 ARM® Cortex™-A9

Processor speed 1 Ghz

Memory controller Embedded, with 512 MB DDR3-800 RAM

Storage 8GB eMMC NVM

Display 10.1” 1280x800 LCD with Projected Capacitance Touch Screen and Corning Gorilla Glass®

OS Yocto Embedded Linux

Applications App written in C+ + for Embedded Linux

BACKBOX REQUIREMENTS

A wall-mounted GRS-10H must be mounted in a gang box that is at least 2.5" deep, minimum.

Standalone 2-, 3-, or 4-gang box

With adjacent handset 2-, 3-, or 4-gang box

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written warranty extended on the sale or rental of its products.

© 2021 Hill-Rom Services, Inc. ALL RIGHTS RESERVED. LAB01175 Rev 34 ENG – US

Graphical Room Station 10H (GRS-10H)

VoalteTM Nurse Call Pillow Speaker

Within Voalte™ Nurse Call, the pillow speaker acts as a call device to place calls to the primary console and may have controls for other functions.

GENERAL CHARACTERISTICS

• Hand-held call device usually placed near the patient's pillow or hand

• Two-way audio

• Button to call staff member

• Assignable call buttons

• Cable length of 8 ft

• Volume control

• Sealed overlay to protect components against fluids and contamination

• 20-pin connection

FUNCTIONS

Integrates nurse call, lighting, and entertainment controls within the constant reach of the patient.

AVAILABILITY

Hillrom offers two standard models of Curbell pillow speakers (pictured). For more information on additional models that are compatible with the Voalte Nurse Call system, vis-it http://www.curbellmedical.com/hill-rom.

To order pillow speakers directly from Anacom MedTech, call 1-800-955-9540 to be directed to your Regional Account Manager.

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

© 2020 Hill-Rom Services, Inc. ALL RIGHTS RESERVED. LAB01175 Rev 28 ENG – US

Pillow Speaker

No Pain and Bath Request

Pain and Bath Request

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

Power Over Ethernet Switch Delta II

Power over Ethernet (PoE) switches enable network devices to run without a separate power supply, so that they can be placed wherever there is an Ethernet connection.

FEATURES

• Complies with IEEE802.3, IEEE802.3u, IEEE802.3x, and IEEE802.3ab

• 24 10/100M auto-negotiation switching port

• 2 Gigabit Combo ports

• 8K MAC address entries supported with hardware-based aging

• Back pressure flow control at half-duplex, IEEE802.3xflow control at full-duplex

• IEEE 802.1D spanning tree protocol support

• IEEE802.1P based QoS supported, 4 priority queues per port

• Diffserv

• IEEE 802.1Q based tagged up to 255 VLAN support

• IEEE 802.1x support

• Port mirroring support

• Dynamic Host Configuration Protocol (DHCP) and BootP support

• SNMP v1, v2c support

• MIB II (RFC1213), Ethernet Interface MIB (RFC1643), Bridge MIB (RFC1493), Enterprise MIB, IEEE 802.1QMIB, IF-MIB

• 4-Group RMON (RFC1757)

• IGMP snooping v1 & v2

• Broadcast and Multicast rate control

• Web and Command Line configuration interface

• Configuration file upload and download

• Web based management with embedded HTTP server provided

• Software upload via TFTP

• Text-based management through 4 in-band telnet sessions, and out-of-band

• RS232 console port ( VT100)

• 19-inch rack-mountable

• Standard 1U chassis high

• Supports IEEE 802.3af/at/bt with total of 360W for PoE

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

FEATURES CONT.

• Enable/disable power sourcing equipment (PSE) function per port

• Support PSE pin out alternative A and B on Port 1to 8

• Support PSE pin out alternative A ie. pin 1, 2, 3, 6 on Port 9 to 24

• Layer 2 Switch capabilities with Command Line Interface configuration

• Support for fiber links (2 GBIC ports)

• SSH support

• Support for disabling Telnet and HTTP server

• Support for configurable login banner

• Support for secondary NTP server

ELECTRICAL

Input voltage 100-240VAC/50-60 Hz universal input Output voltage (nominal) 50VDC Power input (maximum) 525W total

Power output (maximum) 360W total

Ports programmable 8 ports @ 60W 16 ports @ 30W

In the event that the system is over-powered, power allocation will be based on port priority:

port 1 will have the highest priority and port 24 will have the lowest priority.

In the event that an individual port is over-powered, power will only be transmitted after PSE auto-negotiate with PD to reduce the power requirement below the per port power limitation.

Labels indicate the power output for each port.

PoE Switch - Front

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

DIMENSIONS

Width 17.32" Height 1.7" Depth 15.25"

Shipping Weight 19.6 lbs.

MEMORY AND PROCESSING

CPU BCM53344

CPU memory 32 MB Switch DRAM 16 MB

Flash memory 8 MB

Power over Ethernet Broadcom 591 x 4

ENVIRONMENTAL SPECIFICATIONS

Operating temperature 32 to 122 ° (0 to 50 ° C) Storage temperature -4 to 158 ° (-20 to 70 ° C) Operating humidity 10 to 90% RH

Storage humidity 10 to 95% RH

PoE Switch - Back Note: This DC 48V port is not supported in a Hill-Rom environment

PoE Switch - Left Side

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

Remote Call Devices

Staff members and patients can call for help from a location where audio connection is not required. These switches are call devices only; they do not send or receive voice messages.

GENERAL CHARACTERISTICS

• A shower switch is mounted on the wall inside a shower and has a nurse call lever, a cord with a weight, and a call-placed LED.

• A bath switch is mounted on the wall near a toilet and has a nurse call lever, a cord with a weight, a call-placed LED, and a call cancel button.

• Remote call devices have a nurse call lever or push button, a call-placed LED, and a call cancel button. The call cancel button is optional (cancel button not available for shower switch).

• All remote switches connect to the Room Control Board (RCB).

DIMENSIONS

Height 123 mm Width 71 mm Depth into backbox 40 mm Shipping Weight .45 lbs Call Cord Length 82.5 ± .25 in.

Call Cord Tensile Strength 25 lbs

FUNCTIONS

• A cord attached to the nurse call lever allows a patient who has fallen in the shower or bathroom to pull the nurse call lever by pulling the cord.

• Strategically placed remote code and remote staff emergency call devices supplement those same switch types found on room stations.

• The remote call devices mount on a wall in a location where the audio capabilities are not required, but the ability to declare a “code,” staff emergency, or patient emergency situation is required.

• Remote code switches can also distinguish which bed (A or B) a code call is for in a semi-private room.

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

CAUTION: The “Push To Call” switch is intended to be used for generic (programmable) non-emergency call types only and must not be used for emergency calls.

For push button switches, Hillrom only authorizes Code Blue, Code Pink, and Staff Emergency switches to be used for emergency calls.

ELECTRICAL CHARACTERISTICS

• Cable requirements: 8-conductor, CAT5/CAT5e/CAT6 or better, unshielded twisted pair, RJ45 connector termination

• Operates at 5VDC

BACKBOX REQUIREMENTS

• Mounts in a 1-gang workbox, 3' x 2" x 2.5"

• Mounts in a 2-gang backbox with a 1-gang mud ring

• Mounts in a headwall system (1-gang)

PULL SWITCHES PUSHBUTTON SWITCHES

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

MECHANICAL CHARACTERISTICS - CONTACTS

Lever up Closes contact Lever down Opens contact Cancel or push button (optional) Momentary contact closure

CAUTION: Do not install switches with cancel or push button options in the shower.

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

OPERATING TEMPERATURE AND CLEANING INFORMATION

• Storage temperature - The Remote Call Device shall be stored in an area with a -40°C to 70°C temperature range with relative humidity ranging from 10% to 95% (non-condensing).

• Operating temperature - The Remote Call Device shall be able to operate in an area with a 10°C to 49°C temperature range

• Device cleaning - The Remote Call Device plastic cover shall be able to be cleaned with a mild household cleaner and a soft lint-free cloth. Other common display cleaners can be used if the concentrations do not exceed the following:

(follow manufacturer precautions)

» Alcohol based cleaners should not exceed 10% concentration » Sodium hypochlorite based cleaners (Clorox type) should not exceed 10% concentra-tion » Isopropanol based cleaners (Cidex / CaviCide1 / CaviWipes) should not exceed 15% concentration » Lysol type cleaner; Ethanol 1%, Alcohols, C12-16, ethoxylated 5%, N-alkyl (40% C12, 50% C14, 10% C16) dimethyl benzyl ammonium chloride 1.5%

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

Room Control Board 3 (RCB3)

The Room Control Board is the central connection point for devices in rooms, staff areas, hallways, etc. Generally, each patient room and staff location has its own RCB.

CONFIGURATIONS

A Room Control Board 3 (RCB3) can be installed in the following configurations:

• Wall-mounted with a circuit board enclosure and cover (vertical)

• Wall-mounted with a circuit board enclosure and cover adjacent to a Dome Light

• Mounted above the ceiling without a cover or a circuit board enclosure in a room box

(see Room Box data sheet)

• A low profile wall mount kit is available for the RCB3 (P2599NNC3A01)

NOTE: Due to ventilation requirements, an RCB cannot be mounted horizontally to a ceil-ing with a cover.

CAPABILITIES

All room devices connect to the RCB3 through CAT5/5e/6 cables. All communication to and from a room routes through the RCB3 to the correct destination device.

DIMENSIONS

Height 8" Depth 1.6" (4.1 cm)

Width 9.3" (23.6 cm)

Shipping Weight 2.0 lbs

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

CONNECTIONS

• One connection to the PoE switch

• Two connections for a GRS-5 or SRS

• One connection for a GRS-10

• Two RAD connections

• Eight configurable switch connections

• One Dome Light connection

• One Zone Light/second Dome Light connection

• Two relay connections at terminal block

• Eight Single-bulb Dome Light connections

ELECTRICAL

Input voltage (nominal) 48VDC (connected to PoE) Power consumed (nominal) 4W Power distributed (maximum) 23W

HARDWARE SPECIFICATIONS

Processor i .mx6 (on Variscite DART 6UL SOM) Processor speed 696 Mhz Memory 512 MB RAM Storage 8GB eMMC Display Headless OS Linux 4.9.11 GUI Library None Applications GUI less C+

BACKBOX REQUIREMENTS

RCB3s must be mounted to a back box that is 3.5” (8.9 cm) deep, minimum, unless they are installed in an existing room box.

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

ROOM BOX INSTALLATION

RCB3s with a circuit board enclosure and no cover, as well as RCB3s without an enclosure or cover, must be installed in room boxes.

NOTE: The RCB3 without a circuit board enclosure (or cover) is secured to a metal plate at the factory with standoffs and screws. The metal plate is designed so that the entire assembly can be installed inside the room box.

With a circuit board enclosure (no cover) Without a circuit board enclosure (no cover)

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

RCB3 connectors

Terminal block

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

Single-Bulb Dome and Zone Light

Single-bulb Dome Lights are used to annunciate selected call signals, for example from call cords, bath and shower switches, and smoke detectors.

GENERAL CHARACTERISTICS

• Flame-retardant plastic base

• Flame-retardant translucent plastic diffuser

FUNCTIONS

• Mounts to the wall or ceiling outside patient rooms to provide a visual signal to notify staff members of events occurring in patient rooms

• Excellent visibility

DIMENSIONS

Height 4.52" Depth 3.15"

Width 4.56"

Shipping Weight .25 lbs

CONNECTIONS

Connectors 2 individual pig-tails

Cable requirements 2 conductor, 24 AWG, CAT5/CAT5e plenum rated

NOTE: Single-bulb Dome Lights are not supervised; therefore, emergency remote switches that are configured as alternate locations that illuminate Single-bulb Dome Lights must also be assigned to a zone light.

NOTE: Primary room stations must belong to the same zone as an alternate location in order for the switches in the alternate location to illuminate a Zone Light.

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

Single-Bulb Dome and Zone Light

MECHANICAL SPECIFICATIONS

Front plate White flame-retardant plastic Power 24 VDC from the Room Control Board Weight 0.25 lbs Bulb type LED Bulb rating 24 VDC, 30 mA

Backbox (Renovation) RACO

500 Gangable (2 required)

Height: 3"

Width: 2"

Depth: 2 1/2" Backbox (New Construction)

RACO 231 - 4 Square Box

RACO 778 - Ring

Height: 4"

Width: 4"

Depth: 2 1/8"

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

Standard Room Station (SRS)

The Standard Room Station (SRS) is a basic type of room station that is capable of being installed in headwalls. It has no display and has the ability to place and cancel calls.

CONFIGURATIONS

It can be used in the following ways:

• Patient Station: installed in patient rooms with Audio station Bed Connectors (ASBCs)

• Staff Station: installed outside of patient rooms and allows staff to place calls

• Duty Station: staff station configured to notify of nurse calls within the nursing unit via audible tones

• Visitor Station: same as the staff station except configured to allows vistors to place calls

The SRS is a true embedded device in that it runs single-threaded code on the PSOC processor. It is an element in the patient room that routes the audio to the correct control point, but does not control the audio.

DIMENSIONS

Height 6.2" (156 mm)

Depth 1.3" (33 mm)

Width 8.0" (203 mm)

Shipping Weight 1.9 lbs

ELECTRICAL

Input voltage (nominal) 36VDC

Power (nominal) 1.08W

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

Standard Room Station (SRS)

HARDWARE SPECIFICATIONS

Processor PSOC Processor speed Up to 24 Mhz Memory controller 2 KB SRAM Storage 32 K Executive Flash Display Headless OS None GUI Library None Applications Native C firmware

CONNECTIONS

6 RJ45s 1 for connecting to the RCB 4 for connecting 2 ASBCs (2 port per ASBC) 1 for connecting headset

BACKBOX REQUIREMENTS

The SRS must be mounted in a gang box that is at least 2.5" deep minimum.

Standalone 3-gang (preferred) or 2-gang box 1 adjacent ASBC 5- gang (preferred) or 4-gang box

2 adjacent ASBCs 3-gang box + two 1-gang boxes, spaced appropriately 2-gang box + two 1 gang-boxes, spaced appropriately 4-gang box + one 1-gang box, spaced appropriately

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

UPS

Hillrom recommends using the Tripp Lite 1500VA UPS Smart AVR 120V 2U RM as an uninterruptible power supply (UPS). NOTE: Not approved for seismic installations.

GENERAL CHARACTERISTICS

Output volt amp capacity 1440VA Nominal output voltage 120V UPS output waveform Sinewave, 57-63 Hz Output connector quantity 8 Input voltage range AC 82–144 V, 50/60 Hz

Power device features Audible alarm, 5 front panel LEDs, automatic voltage regulation (AVR)

Operating temperature 32–104°F (0–40°C)

Communication interface

Remote USB DB9 serial EPO (emergency power off ) Slot for SNMP/Web interface

Dimensions 3.5" x 17.5" x 13.5" Form factor Rack-mountable, 2U Weight 46 lbs

GENERAL CHARACTERISTICS

Rechargeable rate Less than 4.5 hours from 10–90% Run time at full load 7 minutes Hot swappable

Line/battery transfer 2-4 ms, Low voltage transfer to battery power : 83V, High voltage transfer to battery power: 147V

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

UPS

UPS CERTIFICATIONS

• Tested to UL1778 (USA)

• Tested to CSA (Canada)

• Tested to NOM (Mexico)

• Meets FCC Part 15 Category B

PACKAGING CONTENT

• CD with software

• Rack mounting brackets

• Rack mounting support rails

• Smart UPS signalling RS-232 cable

• USB cable

• User manual

For more information, please contact your local distributor or Hillrom sales representative at 1-800-535-6663.

hillrom.com

Hill-Rom reserves the right to make changes without notice in design, specifications and models. The only warranty Hill-Rom makes is the express written

Software-based Commercial Paging Solutions www.bogen.com

NQ-SYSCTRL - NYQUIST System Controller

IP-BASED PAGING

AND AUDIO DISTRIBUTION SOLUTION

The C4000 Series is a software-based solution for commercial paging and music distribution applications that demand a solution is a powerful, state-of-the-art system controller with an easy to use Web-based Graphical User Interface (GUI) that is ac-cially licensed, Internet radio-based streaming audio services integrate with third-party devices and systems, such as easily upgraded over time to add new features and capabilities to address ever-changing customer needs, environments, C4000 is perfect for:

• Retail

• Warehouses

• Industrial and Manufacturing Facilities

• Healthcare

• Public and Private Institutions

• Transportation Hubs

• Houses of Worship

Features and Capabilities:

• System Controller with optional Automatic Failover capability

• Support for a wide-array of networked appliances and endpoints

• Embedded pro-audio DSP capabilities in all

• Internet-based streaming radio & music services

• Facility map-based interactive calling and zone paging

• Powerful automated Routines & Routines API to support crisis plans and third-party integrations

• Scheduled volume changes via Routines

C4000 Series Compatible Appliances

The C4000 Series is built upon Bogen’s award-winning Nyquist software-based IP communications

NQ-A2060

NQ-A2120

NQ-A2300

NQ-A4060

NQ-A4120

NQ-A4300

NQ-E7010 Input/Output Controller

NQ-E7020 Digital Call Switch

NQ-GA10P

NQ-GA10PV

NQ-GA20P2

NQ-P0100

NQ-PA120

NQ-PA240

NQ-PA600

NQ-S1810CT-G2 VoIP Ceiling Speaker

NQ-S1810WT-G2

NQ-T1000

NQ-T1100

S O F T W A R E L I C E N S E D E S C R I P T I O N S

• Supports up to 3 Paging Zones.

• Includes licensing for 10 Concurrent Calls*.

feature enhancements and all standard new features.

Nyquist C4000 Series System Software License – Bundle 1NQ-C4000-B1

All Nyquist C4000 software licenses are perpetual and do not expire (i.e., no annual license renewal fees).

Optional Software Update Subscriptions are available to allow customers to keep their C4000 system up-to-date with the latest features and functionality.

SYSTEM S/W BUNDLES

• Supports up to 9 Paging Zones.

• Includes licensing for 10 Concurrent Calls*.

feature enhancements and all standard new features.

Nyquist C4000 Series System Software License – Bundle 2NQ-C4000-B2

• Supports up to 24 Paging Zones.

• Includes licensing for 10 Concurrent Calls*.

feature enhancements and all standard new features.

Nyquist C4000 Series System Software License – Bundle 3NQ-C4000-B3

• Supports a virtually unlimited number of Paging Zones.

• Includes licensing for 10 Concurrent Calls*.

feature enhancements and all standard new features.

Nyquist C4000 Series System Software License – Bundle 4NQ-C4000-B4

* Concurrent Calls are synonymous with simultaneous “talk paths” through the system. Additional Concurrent Call Licenses (CCLs) are available in expansion packs of 10 (See NQ-C4000CCLX section in “System Options and Add-Ons”).

• All Call (1)

• Emergency All Call (1)

• Multi-Site All Call (1)

• Multi-Site Emergency All Call (1)

• Multi-Facility Paging (1)

• Multi-Facility Announcements (1)

• Zone Page (1)

• Intercom Call (1)

• Station-to-Station Call (1)

• Recording an announcement (1)

• Retrieving a vmail message (1)

• Scheduled Events (e.g., Bells, Tones, Announcements) (1 per active event)

• Audio Distribution (1 momentarily during each start/stop of an audio distribution stream)

• Call Monitoring / Recording (1 in addition to the 1 for the call itself)

• DISA Station Monitoring (2)

The following features/actions each consume one or more Concurrent Call Licenses when in-use:

BY

• Increases the current zone count of any Bundle-1, Bundle-2, or Bundle-3 system by 3-zones, allowing zone count is 9, installing this upgrade will increase it by 3 to 12-zones).

Nyquist C4000 Series System Software - Paging Zone License Expansion Pk.NQ-C4000PZK

SYSTEM OPTIONS & ADD-ONS

Nyquist C4000 Series System Software - Concurrent Call License Expansion Pk.NQ-C4000CCLX

• Intercom calling is disabled by default on every C4000 system. Installing this license enables intercom license description above).

Nyquist C4000 Series System Software - Intercom Call LicenseNQ-C4000ICL messaging within a C4000 system.

Nyquist C4000 Series System Software - Text-to-Speech LicenseNQ-C4000TTS

Nyquist C4000 Series System Software - Queued Paging / Page Stacking LicenseNQ-C4000QPL capability within a C4000 system.

Nyquist C4000 Series System Software - Map Based Paging LicenseNQ-C4000MBP

Nyquist C4000 Series System - PBX Integration ServicesNQ-C4000PBXI

3/31/2025).

separately.

3-Year Extended System Software Updates - Bundle-1NQ-C4SWUP3YRB1

SYSTEM SOFTWARE UPDATE SUBSCRIPTION RENEWALS

separately.

3-Year Extended System Software Updates - Bundle-2NQ-C4SWUP3YRB2 separately.

3-Year Extended System Software Updates - Bundle-3NQ-C4SWUP3YRB3 separately.

3-Year Extended System Software Updates - Bundle-4

Nyquist C4000 Series System Software - Automatic Failover License

Nyquist C4000 Series System Software - Routines API License

NQ-C4SWUP3YRB4

NQ-C4000AFL

NQ-C4000API

The C4000 Series is built upon Bogen’s award winning Nyquist software-based IP communications platform, 1200 MacArthur Blvd., Suite 304, Mahwah, NJ 07430 • 1-800-999-2809 www.bogen-ip.com © Copyright 2021, Bogen Communications, LLC 750-00031B 2012 upgrade will increase it by 6 to 9-zones).

Nyquist C4000 Series System Software License Bundle Upgrade - B1-B2NQ-C4000-B12UP

S/W BUNDLES UPGRADES

upgrade will increase it by 15 to 24-zones).

Nyquist C4000 Series System Software License Bundle Upgrade - B2-B3NQ-C4000-B23UP installing this upgrade will enable it to support a virtually unlimited number of zones).

Nyquist C4000 Series System Software License Bundle Upgrade - B3-B4NQ-C4000-B34UP

• Enterprise-wide Event Management From Single Interface (i.e, Remote Calendar Control)

• All Call Paging

• Emergency All Call Paging

• District-Wide All Call

• District-Wide Emergency All Call

• Zone Paging

• Unlimited number of Paging Zones

• Unlimited simultaneous paging calls

• Multi-facility paging/announcements

• Location Monitoring (Modes: Spy, Whisper, Barge)

• Web-based GUI Dashboard (Audio, Alarms, Announcements, Calling, Paging, Tones)

• Web-based GUI Directory Menus for Announcements, Alarms, Paging Zones, Stations, Tones

• Web User Interface: SIP Client (softphone) - allows calls, paging, etc., from Web UI

• Executive override to access intercom paths

• Admin can override others and interrupt page

• Admin Groups: “Emergency” admin group

• Admin Phone Menus: Alarms, Announcements, Zone Paging, Tones, and Routines

• Direct select rooms from VoIP admin phone an area as needed, e.g., for testing, mtg’s, etc.)

F E A T U R E S

• Tablet Based Zone Volume and Audio Distribution Control

• Unlimited Announcement Files

• Upload and Manage WAV & MP3 Announcement Files

• Audio Program Control via DTMF - Admin Phone

• GUI-based Program Distribution

• Playlists (with easy title drag-n-drop capability)

• Music Import and Management

• Automatic Playlist Creation from USB Stick (Places all

• Record Announcements from an Admin Phone or Web UI

• Separate Zone Volume Controls for Paging vs. Audio Distribution

• Audio Distribution to multiple zones simultaneously

• Integrated streaming Internet radio (airable)

• Integrated commercially-licensed streaming music service (SoundMachine)

• Scheduled Audio from any source (airable Radio, SoundMachine, Playlists, and Line-Input)

• Recurring Scheduled Announcements

• Pink noise and white noise tones to assist with setting-up paging zone volumes

Audio Distribution & Announcement F E A T U R E S

S Y S T E M F E A T U R E S

IP-Based Paging and Audio Distribution

• Integrated Pro-Audio Digital Signal Processing

• Enhanced DSP Controls

Networked Audio

• PoE Plenum-Rated VoIP Intercom Module with HDMI

VoIP talkback speaker and HDMI-capapble TVs/monitors into combo clock/message displays)

IP Speaker Support F E A T U R E S

Event Schedules & Management F E A T U R E S

• Powerful, Innovative Web-based Scheduling Interface

• Activate a Routine in Conjunction with a Scheduled Event

• Execute Any Routine Action when a selected schedule is activated

• Conditional Execution of Routine Actions based on User-Supplied Statements/Parameters

• Scheduled Volume Level changes via Routines

• Master Clock Capability Event Schedules so that tones and bells don’t disturb surrounding areas when business is closed)

• Ability to Sync External Master Clock with I/O Contact Closure

• Unlimited Schedules (Restricted Edit & View by User Role)

• Unlimited Scheduled Events

• Ability to Import/Export Holiday Schedules

• Monthly Calendar Views

• Tones: Generate/Create Tones, Upload Tones, Manage Tones

• Unlimited System Capacity (limited only by system licensing)

• Always an Answer (Calls can be put into admin groups so call will always be answered.)

• Intercom Call-in (From classroom call switch) (requires optional system licensing)

• Unlimited Simultaneous Intercom Calls per Facility (limited only by system licensing)

• Priority Paging Mic (ability to have external Mic for emergency page)

• Unlimited Program Channels

• Unlimited Paging, Time, and Audio Zones (limited only by system licensing)

• Emergency Call-in (Emergency calls from classroom ring with special ring & alert) (limited only by system licensing) (Analogous to Call Assurance LED)

• Relay Input to trigger Events or Routines

• Relay Driver Output Controls (Used to control events, e.g., open door, turn on lights, etc.)

progress, it can be escalated to emergency status)

• Transfer Call from Room Speaker to Room Phone (Call to ceiling speaker can be dropped to the phone or privacy)

• Change/Modify Preannounce Tone

• Create Text-To-Speech Based Announcements (Optional)

• Legacy Analog

• (requires optional system licensing)

Traditional Intercom* F E A T U R E S

S Y S T E M F E A T U R E S

* Intercom calling and associated features are optionally licensed application software

• Ability to Create a Self-Signed Bogen Root SSL

• Web GUI Programming and Diagnostics (Ability to program and test from anywhere)

• Log File Viewing and Export (Server and System)

• Web GUI Station Status (Real-time status of VoIP devices)

• System Backup/Restore

• Automated/Scheduled System Backup

• GUI-based System Status (Current operations displayed on Dashboard)

• Software Adjustable Paging Zone Volume and Email Alerts)

• Automatic update of Appliance Firmware (to match server S/W version)

F E A T U R E S

(EAS) events on the video displays connected to the

• Routines (allows automatic launching of a sequence of a manual input or “triggering” system event. Routines can support your crisis plans for situations such as school lockdown, weather events, or emergency evacuation.

• Expanded Routine API Parameters for 3rd Party Integrations

• Enhanced Routine API Authentication

• Multi-facility Routines

• Emergency Check-In feature that can be used for lockdowns

• Pop-up of a room’s video feed via the Maps view (using standard camera URLs)

• Optional password protection for all-call paging, emergency all-call paging, multi-site paging, facility paging, zone paging, alarms, and tones.

• Play Pre-Recorded Message with Contact Closure

• Speed-Dial Access to Common System Features (Used to make system easy to use for Administrators)

• Output Contact Closure Puts System Into Page Exclusion mode

• Output Contact Closure Triggers an External Event (via output

I/O Controller program logic)

• Emergency Page with Pre-Programmed Messages (WAV, MP3) (ex. “There is a Fire Emergency, please exit building, this is not a drill.”)

• Interactive Map-Based Paging and Intercom (hierarchical drill-down views of multiple maps - including across multiple facilities)

• Text-to-Speech Based Announcements (optional feature) instructions)

• Routines API to Integrate with Security/Access Control Systems (optional feature)

Security & Safety F E A T U R E S

(External MIC, AUX, & Digital Audio Support)

I/O Related Equipment F E A T U R E S

S Y S T E M F E A T U R E S

• Support for third party ATA devices for FXO and FXS

IP Phone Support

• Voice-Prompted Features (via embedded IVR functionality) (Users are instructed as to what the next step should be)

• Intercom Access from IP Phone System (SIP ATA or Tie-Line interface to IP-PBX)

• Voice-Prompted Call Forwarding Status (via embedded IVR functionality)

• Call Monitoring (Modes: Spy, Whisper, Barge, non-DISA) to record count)

• Call or Page via Mobile Device: SIP Client Application

• Call or Page via Mobile Device: Web UI

• SIP trunk management to include PBX Connection access a SIP endpoint

• Allow Intercom Calls to Route to PBX Extensions via SIP Trunk with option to monitor call

• Walking CoS (limited only by system licensing) or an FXO Gateway) (limited only by system licensing) and Admin devices of the system)

• Route selected call priorities (e.g., Emergency) to an external number (Provisioned via CoS)

• Remote Call Pickup (Ability to answer a phone from anywhere in the building/facility)

• Voice Mail (Assignable to any station via CoS)

• Analog Intercom Access from a PBX (via FXO or FXS ports)

• Voicemail Message Waiting Indication Light (on all Bogen VoIP phones)

• Call Forwarding (Automatically sends calls to another station on the system)

• Callback Request with associated Callback Request Indicator

• DISA Call Routing (Allows direct inward station access from outside the system)

• Security DISA Call Routing (Allows direct inward station access from outside the system using a passcode)

• Password Protected Access to Admin Phone Features or ATA FXO ports)

General Telephony* F E A T U R E S

* Intercom calling and associated features are optionally licensed

Tel.: 1-800-999-2809 • www.bogen.com © 2022 Bogen Communications, LLC 740-00113D 2105

NYQUIST

SYSTEM CONTROLLER

Model NQ-SYSCTRL

F E A T U R E S

• Configuration and management via a web-based graphical user interface (GUI)

• Remote access from almost any PC/MAC, tablet, or mobile device

• Continuous monitoring of stations and appliances to ensure system operation

• Front panel power LED

• SIP tie-line and trunking support for connection to external phone systems or VoIP service providers

• Station and zone capacity for any Nyquist application (determined by system license)

• Talkback capability in any zone

• Multicast support for all zone paging and audio distribution

• Paging and announcement support across multiple facilities

• Pre-recorded and (optional) text-to-speech announcements

• Built-in streaming Internet radio and access to subscription-based music services

• Automatic Failover option available (requires a second System Controller and software license)

• Simultaneously distribute a virtually unlimited number of audio streams

• Music automatically added to music library from USB port

• Network-based audio that can be sourced (input) from any number of Nyquist appliances (NQ-P0100, NQ-GA20P2, etc.)

• Ample storage for music files, recorded announcements, and call recordings

• G722 and OPUS audio codec support to deliver superior HD audio quality

• Event scheduling of tones and audio distribution to all or select paging zones

• Emergency notifications that have higher priority over normal audio events

• Convection air cooled, fanless design for quiet, maintenance free operation

• Wall-, Rack, or Shelf-mountable – 1 RU package

• 19” Rack Mount Kit (NQ-RMK03; sold separately)

D E S C R I P T I O N

Bogen’s Nyquist System Controller offers contractors a cost-effective means to deploy Nyquist based solutions using a state-of-the-art processing platform preinstalled with the Nyquist application server software. The Nyquist System Controller facilitates quick in-in mind, the Nyquist System Controller can simultaneously distribute a virtually unlimited number of audio streams anywhere across the network, making it perfect for background music applications.

The Nyquist System Controller can manage applications that require nearly any mix of multi-zone paging, intercom calling, or back-ground music distribution at businesses, restaurants, retail stores, industrial facilities, and many other venues.

Nyquist systems also support a licensable option for using a secondary System Controller to provide Automatic Failover capability

Controller automatically takes over and returns the system to normal service.

A & E S P E C I F I C A T I O N S faces with the customer’s data network to leverage the ultimate level of scalability for single or multiple locations and system sizes from virtually any PC/MAC, tablet, or mobile device. The System Controller shall continually monitor the Nyquist devices connected to the system and shall report via email when a device stops functioning correctly. The System Controller must support SIP tie-line and

The System Controller shall be capable of simultaneously distributing a virtually unlimited number of audio streams anywhere across the data network. The NQ-SYSCTRL shall be capable of being paired with a secondary NQ-SYSCTRL to provide Automatic Failover capability when licensed appropriately. The System Controller is a convection air cooled, fanless design for quiet, maintenance free operation. System Controllers that don’t provide the these features shall not be considered equivalent.

T E C H N I C A L S P E C I F I C A T I O N S

Limited Warranty, Exclusion of Certain Damages The NQ-SYSCTRL

THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY

LAW

IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES.

POWER

Nyquist System Controller

HDMI

DVI

A B

The C4000 Series is built upon Bogen’s award-winning Nyquist software-based IP communications platform, © 2021 Bogen Communications, Inc. 750-00018C 2102

NETWORKED 2-CHANNEL

AUDIO POWER GEN 2 AMPLIFIERS

Models NQ-A2060-G2, NQ-A2120-G2, NQ-A2300-G2

F E A T U R E S

• 1 dedicated Balanced Line Input (both Phoenix plug & XLR)

• Line Input that can be routed-out over the Nyquist network

• Network-based audio input (paging, audio distribution)

• 4 ohm, 8 ohm, 25V, and 70V outputs

• GUI based DSP control

- 16-band Graphic Equalizer

- Signal Present and Clip Monitor

- Adjustable High Pass, Low Pass, and Bandpass Filters

- Noise Gate

- Compressor/Limiter

- 7-band Parametric Equalizer

• Switch selectable 2-channel or 1-channel bridged operation

• Safety: CAN/CSA C22.2 No. 62368-1:2014;

UL62368-1:2014; EN 62368-1:2014

• EMC: FCC Part 15b Class A; ICES-003,Issue 6: 2016;

EN 55032:2012; EN 55035:2017

• 1/2 Rack Width - Wall, Rack, or Shelf mountable – 1RU and 2RU packages

• 19” Rack Mount Kit (NQ-RMK03; sold separately)

D E S C R I P T I O N

Models NQ-A2060-G2 & NQ-A2300-G2 shown

A & E S P E C I F I C A T I O N S

E7000 Series

Power Output 2-Ch. Mode (per Ch.) 60W @ 25V/4 ohms 120W @ 25V/4 ohms 300W @ 25V/4 ohms

Power Output 1-Ch. Bridged Mode (per Ch.) 120W @ 70V/25V/8 ohms 240W @ 70V/25V/8 ohms 600W @ 70V/25V/8 ohms

Line-In Sensitivity (Gain min./max.) Continuously variable from 2V to 0.1V RMS

S/N Ratio (20 kHz BW) 97 dB

Power Output Bandwidth 20 Hz- 20 kHz < .03% THD+N

THD+N @ 1 kHz rated power < .03%

Rated Load Impedance (min. per Ch.) 8 ohms Bridged / 4 ohms Non-Bridged

Frequency Response @ 1 Watt 20 Hz - 20 kHz +/- 0.25 dB

Class of Operation Class D

Connectors Power 10A Line Cord C14 IEC Inlet

Input Balanced 3-pin Phoenix Plug/Header, Balanced 3-pin Neutrik XLR, RJ45, USB 2.0 Type A

Output 4-pin “touch proof” Phoenix Plug/Header

Line Inputs 10k ohm electronically balanced, 3-pin Phoenix and 3-pin Neutrik XLR

AC Input Voltage Range 85 VAC to 265 VAC 50/60 Hz

Maximum AC Current 2A 3A 6A

Indicators Status & Power LEDs (front) / Network LEDs (rear)

Operating Temperature Range -15 C to +40 C

Thermal Emissions (Full Power) 90 BTU/hr. 135 BTU/hr. 225 BTU/hr.

Cooling Convection

Protection RF, DC, Low Frequency, Thermal, Low Impedance, Short Circuit, Clip Limiting

DSP Based Audio Features 16-band Graphic Equalizer; Signal Present and Clip Monitor; Adjustable High Pass, Low Pass, and Bandpass Filters; Noise Gate; Compressor/Limiter; 7-band Parametric Equalizer

Special Features Sleep Mode (defeatable), Power Factor Correction (PFC), 89% Amplifier Efficiency, On/Off Muting, Bridge Mode Switch

Networking Cat5 or better 10/100 network connectivity to Bogen's Nyquist network

Product Weight 4.4 lbs. 4.4 lbs. 6.4 lbs.

Physical Dimensions: 1/2 Rack Width x 1RU* 1/2 Rack Width x 2RU** *Single Rack Space (1RU) 8.00” W x 1.70” H x 13.48” D (Depth includes Phoenix connectors; width is without rack mount brackets attached; height excludes rubber mounting feet)

**Double Rack Space (2RU) 8.00” W x 3.43” H x 13.48” D (Depth includes Phoenix connectors; width is without rack mount brackets attached; height excludes rubber mounting feet)

NQ-A2060-G2 NQ-A2120-G2 NQ-A2300-G2

www.bogen.com © Copyright 2020, Bogen Communications, Inc. 740-00152B 2109

+ –G

+ –G

LINE INPUT 1

LINE INPUT 2

+ –G

+ –G

LINE

INPUT 1

LINE

INPUT 2

T E C H N I C A L S P E C I F I C A T I O N S

Limited Warranty, Exclusion of Certain Damages The NQ-A2060-G2, NQ-A2120-G2, NQ-A2300-G2

THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY

LAW

IN NO EVENT SHALL BOGEN BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF PRODUCTS, EVEN IF BOGEN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES.

Models NQ-A2060-G2 and NQ-A2120-G2 Front/Rear Panels

Model NQ-A2300-G2 Front/Rear Panels