36C24219Q0200-002.xlsx

XLSX spreadsheet 18 KB Posted May 17, 2019

Attached to: VISN 2 Downstate Asbestos/Lead/Mold Abatement On-Call and Emergency Services
Solicitation number: 36C24219Q0200
Issued by: Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 2

About this file

From the source

36C24219Q0200 Pricing Schedule Table - VISN 2 Abatement Services.xlsx

View the file

Other files

File	Type	Posted
36C24219Q0200-0002000.docx	DOCX document	Jun 21, 2019
36C24219Q0200-0001000.docx	DOCX document	Jun 10, 2019
36C24219Q0200-001.docx	DOCX document	May 17, 2019
36C24219Q0200-003.docx	DOCX document	May 17, 2019
36C24219Q0200-000.docx	DOCX document	May 17, 2019

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

ASBESTOS

ITEM UNIT OF MEASURE UNIT PRICE

PRE-WORK REQUIREMENTS
Submittals
Attend on-site pre-start meeting, prepare and submit brief asbestos abatement work plan, project schedule, decontamination unit sketches and worker qualifications	EA
Mobilize All Personnel and Equipment To Site (Within 24 Hour Notice)	EA
Mobilize All Personnel and Equipment To Site (Within 72 Hour Notice)	EA
Mobilize All Personnel and Equipment To Site (> 72 Hour Notice)	EA
CONTAINMENT & PREPARATION IN ASBESTOS ABATEMENT WORK AREA
Remove and relocate within facility all movable furniture, etc.	HR
Hard Separation barrier, 2" x 4" wood studs @ 16", 1/2" plywood ea. side to 8' height	SF
Hard Separation barrier, 2" x 4" wood studs @ 16", 1/2" plywood ea. side to 12' height	SF
for heights above 12' add
Remove Non-Asbestos Material (to access ACM for abatement). Establish HEPA-filtered negative pressure containment as stipulated in the project documents.
Non-ACM Carpet	SF
Non-ACM Vinyl Cove Base Molding	SF
Non-ACM Vinyl Floor Tile with Non-ACM Mastic	SF
Non-ACM Concrete Masonry Unit Wall Chase	SF
Non-ACM Wall Plaster	SF
Non-ACM Ceiling Plaster	SF
Non-ACM Sheetrock Wall	SF
Non-ACM Sheetrock Ceiling	SF
Remove and store on-site existing Non-ACM suspended acoustical tile, metal T-grid to remain in place	SF
Remove, clean and store on-site existing suspended acoustical ceiling tile system complete with metal T-grid and tile	SF
Remove and Clean 2 x 4 Fluorescent Light fixtures, Store on Site	EA
Remove Asbestos-Contaminated Material (In accordance with all applicable regulations and contract requirements, including but not limited to preparation of work areas, installation of critical barriers, polyethylene sheeting containment barriers, installation/setup of HEPA Microtrap machines, decontamination enclosures, material removal and required cleaning to meet air clearance standard, dismantling and removal of containment and equipment at conclusion of project).
Demolition in asbestos contaminated area, Plaster and Lath ceiling, including suspension system	SF
Demolition in asbestos contaminated area, ceiling, suspended acoustical tile	SF
Demolition in asbestos contaminated area, concealed spline ceiling system	SF
Demolition in asbestos contaminated area, ceiling, gypsum board	SF
Demolition in asbestos contaminated area, ceiling, Fiberglass Batt Insulation	SF
Demolition in asbestos contaminated area, ceiling, Fiberglass Pipe Insulation	LF
Remove Asbestos-Containing Material (In accordance with all applicable regulations and contract requirements, including but not limited to preparation of work areas, installation of critical barriers, polyethylene sheeting containment barriers, installation/setup of HEPA Microtrap machines, decontamination enclosures, material removal and required cleaning to meet air clearance standard, dismantling and removal of containment and equipment at conclusion of project).
Transite Board
Cement-asbestos Transite Board (i.e, in Laboratory Fume Hood or Benchtop)	SF
Surfacing (Plaster /Sheetrock)
ACM Plaster Ceiling (including suspension system and lath)	SF
ACM Plaster Wall (including lath)
ACM Sheetrock Ceiling (clean studs and leave in place)
ACM Sheetrock Wall (clean studs and leave in place)	SF
ACM Sheetrock Ceiling including suspension system
ACM Sheetrock Wall including studs	SF
Ceiling Tiles
Ceiling Tiles with ACM Mastic (glue daubs)	SF
Vinyl Asbestos Floor Tile/Mastic
Single Layer of Vinyl Asbestos Tile and ACM Mastic	SF
for each additional Layer of VAT and ACM Mastic add	SF
Single Layer of Vinyl Composition Tile (non-ACM) & ACM Mastic	SF
for each additional Layers of non-ACM VCT and ACM Mastic add	SF
Remove ACM Mastic (only) from Concrete floors	SF
Carpet
Remove Asbestos-Contaminated Carpet from Floor	SF
Duct Insulation
Remove Boiler Breeching, Duct or AHU Insulation (to 1" thick)	SF
Remove Boiler Breeching, Duct or AHU Insulation (to 2" thick)	SF
Pipe Insulation (Full Containment)
to 4" Insulation Size (Outside Dia.)	LF
to 8" Insulation Size (Outside Dia.)	LF
to 12" Insulation Size (Outside Dia.)	LF
Pipe Insulation (GloveBag Method)
to 4" Insulation Size (Outside Dia.)	LF
to 8" Insulation Size (Outside Dia.)	LF
to 12" Insulation Size (Outside Dia.)	LF
Spray-on Fireproofing
Remove asbestos insulation or fire proofing from decking, beams, columns, joists or other flat structural surfaces plus any overspray	SF
Remove asbestos insulation or fire proofing from irregular surfaces plus any overspray	SF
REINSTALL ITEMS (INCLUDES CLEANING)
Reinstallation
Re-install existing 2 x 4 fluorescent light fixture	EA
Re-install existing suspended acoustical ceiling tiles in existing grid	SF
Reinstall all movable furniture, equipment, etc. after work is complete (excluding office partition units)	Day
WASTE DISPOSAL
Disposal
Asbestos waste disposal charges, including haul	C.Y.
Disposal of Non-ACM Construction and Demolition Material	C.Y.

&"-,Bold"&14HAZARDOUS MATERIALS ABATEMENT

UNIT PRICING TABLE

LEAD

ITEM UNIT OF MEASURE UNIT PRICE

REMOVAL OF LEAD BASED PAINT (LBP)
Pre-Work
Attend on-site pre-start meeting, prepare and submit brief lead abatement work plan, project schedule, decontamination unit sketches and worker qualifications	EA
Mobilize All Personnel and Equipment To Site (Within 72 Hour Notice)
Mobilize All Personnel and Equipment To Site (> 72 Hour Notice)	EA
Containment
Preparation of lead containment area in accordance with all applicable regulations and contract requirements and post-abatement cleaning (including but not limited to pre-cleaning, HEPA vacuum and wet wipe floor and wall surfaces, cover non-work surfaces with polyethylene sheeting)	SF of Floor Area
Encapsulation
Encapsulation of lead-based paint, interior, brushwork, trim, under 6"	LF
Encapsulation of lead-based paint, interior, brushwork, trim, 6" to 12" wide	LF
Encapsulation of lead-based paint, interior, brushwork, balustrades	LF
Encapsulation of lead-based paint, interior, brushwork, pipe, to 4" diameter	LF
Encapsulation of lead-based paint, interior, brushwork, pipe, to 8" diameter	LF
Encapsulation of lead-based paint, miscellaneous, steel, flat surfaces	SF
Encapsulation of lead-based paint, miscellaneous, steel, beams, brushwork	SF
Encapsulation of lead-based paint, miscellaneous, steel, trusses	SF
Removal
Removal of lead-based paint, baseboard, to 8" wide	LF
Removal of lead-based paint, balustrades, one side	SF
Removal of lead-based paint from doors	SF
Removal of lead-based paint, from door frames, trim to 6"	LF
Removal of lead-based paint, handrails	LF
Removal of lead-based paint, frame and trim	LF
WASTE PACKAGING, HANDLING AND DISPOSAL
Disposal of Lead-containing Hazardous Waste (> 5 parts per million of leachable lead by Toxicity Characteriustic Leaching Procedure)	55-gallon Drum
Disposal of Lead-containing Non-Hazardous Waste (< 5 parts per million of leachable lead by Toxicity Characteriustic Leaching Procedure)	55-gallon Drum

MOLD

ITEM UNIT OF MEASURE UNIT PRICE

PRE-WORK REQUIREMENTS
Submittals
Attend on-site pre-start meeting, prepare and submit brief mold abatement work plan, project schedule and worker qualifications	EA
Mobilize All Personnel and Equipment To Site (Within 72 Hour Notice)	EA
Mobilize All Personnel and Equipment To Site (> 72 Hour Notice)	EA
CONTAINMENT & PREPARATION IN MOLD-IMPACTED AREA
Remove and relocate within facility all movable furniture, etc.	HR
Hard Separation barrier, 2" x 4" wood studs @ 16", 1/2" plywood ea. side to 8' height	SF
Hard Separation barrier, 2" x 4" wood studs @ 16", 1/2" plywood ea. side to 12' height	SF
for heights above 12' add
Remove Mold-Impacted Material. Establish HEPA-filtered negative pressure containment as stipulated in the project documents.
Carpet (remove and dispose)	SF
Vinyl Cove Base Molding (remove and dispose)	SF
Vinyl Floor Tile and Mastic (remove and dispose)	SF
Wall Plaster and Lath (remove and dispose)	SF
Ceiling Plaster and Lath (remove and dispose)	SF
Sheetrock Wall (remove and dispose, leave studs in place)	SF
Sheetrock Wall (remove and dispose of entire wall system including studs)	SF
Sheetrock Ceiling (remove and dispose, leave studs in place)	SF
Sheetrock Ceiling (remove and dispose of entire wall system including studs)	SF
Suspended Acoustical Tile Ceiling (clean grid and leave in place)	SF
Suspended Acoustical Tile Ceiling (remove and dispose of entire ceiling syetm including grid and ceiling tile)	SF
Concealed spline ceiling system (remove and dispose)	SF
Fiberglass Pipe Insulation (remove and dispose)	LF
Remove, clean and store on-site non-impacted suspended acoustical ceiling tile system complete with metal T-grid and tile	SF
Remove and clean 2 x 4 fluorescent light fixtures, store on site	EA
Apply Mold-Inhibitor to Surface Following Abatement (e.g. wall cavity, chase)	SF

File details come from the government source that posted it.