S02 36C24126Q0266_2 Combined Synopsis Mobile Casework Togus.pdf

See attached document: SOW MOBILE LABORATORY CASEWORK.

SUBJEC

T*

Pathology Renovation Phase 2 Casework

GENERAL INFORMATION

CONTRACTING OFFICE’S ZIP CODE* 01053-9764

SOLICITATION NUMBER* 36C24126Q0266

RESPONSE DATE/TIME/ZONE 03-17-2026 12PM EASTERN TIME, NEW YORK,

USA

ARCHIVE 60 DAYS AFTER THE RESPONSE DATE

RECOVERY ACT FUNDS N

SET-ASIDE SDVOSBC

PRODUCT SERVICE CODE* 7110

NAICS CODE* 337215

CONTRACTING OFFICE ADDRESS Department of Veterans Affairs

VAMC Togus

Acquisitions-90

1 VA Center

Augusta ME 04330

POINT OF CONTACT* Contract Specialist

Molly Greening

Molly.Greening@va.gov

PLACE OF PERFORMANCE

ADDRESS Togus VA Medical Center

Combined Synopsis/Solicitation Notice

Maine Healthcare System

Pathology Laboratory

1 VA Center

Augusta ME

POSTAL CODE 04330

COUNTRY USA

ADDITIONAL INFORMATION

AGENCY’S URL http://www.va.gov

URL DESCRIPTION Department of Veterans Affairs

AGENCY CONTACT’S EMAIL ADDRESS

EMAIL DESCRIPTION

DESCRIPTION

See attached Combined Synopsis Solicitation Products and Commercial Services and Statement of Work (SOW) Mobile Laboratory Casework for Togus VAMC

See attached document: Lab Layout Drawings 402 18 620.

Combined Synopsis-Solicitation for Commercial Products and Commercial Services

Effective Date: 04/18/2025 Revision: 02

Description

This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, “Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services,” as supplemented with additional information included in this notice. This announcement constitutes the only solicitation;

quotes are being requested, and a written solicitation document will not be issued.

This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06.

This solicitation is set-aside for

Service-Disabled Veteran-Owned Small Business

The associated North American Industrial Classification System (NAICS) code for this procurement is 337215 with a small business size standard of 500 employees.

The FSC/PSC is 7110.

The Togus VA Medical Center is seeking to purchase Mobile Laboratory Casework.

All interested companies shall provide quotations for the following:

Supplies/Services

Line Item Description Quantity Unit of Measure

0001 30”x48" Lab Table w work surface 3 EA

0002 30”x60" Lab Table w work surface 4 EA

0003 30”x48" Lab Table w shelving, worksurface, hydraulic and undershelf lighting

2 EA

0004 36”X48" Lab Table w worksurface and shelving, with undershelf lighting

2 EA

0005 36"x60" Lab Table w work surface w hydraulics 2 EA

0006 36"x60" table w shelving and work surface, with undershelf lighting

1 EA

0007 30"X48" table w shelving and work surface, with undershelf lighting

1 EA

0008 36"X72" table w shelving and work surface, with undershelf lighting

2 EA

0009 30"X60" table w shelving and work surface, with undershelf lighting

2 EA

0010 Suspended Full Door Unit with Writing Tablet 3 EA

0011 Suspended 4 Drawer unit with Writing Tablet 2 EA

0012 Suspended Full Door Cabinet Unit with Writing Tablet

7 EA

0013 Suspended Open Cabinet with adjustable shelf 5 EA

Effective Date: 04/18/2025 Revision: 02

See the statement of work pdf attachment for more details regarding casework. If possible, submit OEM letter.

Delivery shall be provided no later than 12 weeks after receipt of order (ARO).

FOB: Destination

Place of Performance/Place of Delivery

Address: Togus VA Medical Center 1 VA Center Augusta, ME

Postal Code: 04330-6795

Country: UNITED STATES

The full text of FAR provisions or clauses may be accessed electronically at https://www.acquisition.gov/browse/index/far.

The following solicitation provisions apply to this acquisition:

1. FAR 52.212-1, “Instructions to Offerors–Commercial Products and Commercial Services”

2. FAR 52.212-3, “Offerors Representations and Certifications–Commercial Products and Commercial Services”

Offerors must complete annual representations and certifications electronically via the System for Award Management (SAM) website located at https://sam.gov/ in accordance with FAR 52.212-3, “Offerors Representations and Certifications– Commercial Products and Commercial Services.” If paragraph (j) of the provision is applicable, a written submission is required.

3. FAR 52.212-2 Evaluation-Commercial Products and Commercial Services [In accordance with FAR 12.301(c) when the use of evaluation factors is appropriate, the contracting officer may (1) Insert the provision at 52.212-2, Evaluation- Commercial Products and Commercial Services, in solicitations for commercial products or commercial services (see 12.602); or (2) Include a similar provision containing all evaluation factors required by 13.106, subpart 14.2 or subpart 15.3, as an addendum (see 12.302(d)).]

The following contract clauses apply to this acquisition:

• FAR 52.212-4, “Contract Terms and Conditions–Commercial Products and Commercial Services” Nov 2023 file:///C:/Users/VHAMACSTEVIB/AppData/Local/Microsoft/Windows/INetCache/Content.Outlook/D0W2TKP0/VIEWS%2010769758.zip https://sam.gov/ https://www.acquisition.gov/far/part-52#FAR_52_212_2 https://www.acquisition.gov/far/part-12#FAR_12_602 https://www.acquisition.gov/far/part-13#FAR_13_106 https://www.acquisition.gov/far/part-14#FAR_Subpart_14_2 https://www.acquisition.gov/far/part-15#FAR_Subpart_15_3 https://www.acquisition.gov/far/part-12#FAR_12_302

Effective Date: 04/18/2025 Revision: 02

• FAR 52.212-5, “Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Products and Commercial Services” Oct 2025

The following subparagraphs of FAR 52.212-5 are applicable:

52.204-7, 52.225-1, 52.225-2, 52.252-1, 52.225-18, 52.203-17, 52.203-19, 52.204-13, 52.209-10, 52.219-6, 52.222-19, 52.222-36, 52.222-50, 52.226-8, 52.232-33, 52.232- 40, 52.233-3, 52.233-4, 852.203-70, 852.212-71

All quoters shall submit the following: Quote

All quotes shall be sent to the Contract Specialist, Molly.Greening@va.gov.

Award will be based upon a comparative evaluation of quotes in accordance with the Simplified Acquisition Procedures of FAR 13. Comparative evaluation is the side by side pairwise comparison of quotes based on factors resulting in a Contracting Officer decision for the quote most favorable to the Government.

The following are the decision factors:

Price, delivery speed, OEM authorization, past performance

The award will be made to the response most advantageous to the Government.

Responses should contain your best terms, conditions.

ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL

PRODUCTS AND COMMERCIAL SERVICES (SEP 2023)

Provisions that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the

Contracting Officer will make their full text available. The version of FAR 52.212-1 in the addendum is tailored for Simplified Acquisition Procedures and supersedes the current version of FAR 52.212-1 contained in the FAR.

The following provision is incorporated into 52.212-1 as an addendum to this solicitation:

52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (SEP 2023)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the Request for Quote (RFQ). However, the small mailto:Molly.Greening@va.gov

Effective Date: 04/18/2025 Revision: 02 business size standard for a concern that submits an quote, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition—

(1) Is set aside for small business and has a value above the simplified acquisition threshold;

(2) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(3) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(b) Submission of Quotes. Submit signed and dated quotes to the office specified in this Request for Quote (RFQ) at or before the exact time specified in this solicitation. Quotes may be submitted on letterhead stationery, or as otherwise specified in the solicitation. As a minimum, quotes must show—

(1) The solicitation number.

(2) The time specified in the solicitation for receipt of quotations;

(3) The name, address, and telephone number of the quoter;

(4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) "Remit to" address, if different than mailing address;

(8) A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Quotation Amendments;

(10) Past performance information will not be considered in simplified acquisition procurements.

https://www.acquisition.gov/far/part-52#FAR_52_212_3 https://www.acquisition.gov/far/part-52#FAR_52_212_3

Effective Date: 04/18/2025 Revision: 02

(11) Quotes should include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotes that fail to furnish required representations, or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of Quotes. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of quotes, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotes. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during preaward testing.

(e) Multiple Quotes. Quoters are encouraged to submit multiple quotes presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with FAR subpart 4.10), or alternative commercial products or commercial services for satisfying the requirements of this solicitation.

Each quote submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of quotes.

(1) Quoters are responsible for submitting quotes, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that quotes or revisions are due.

(2) Any quote received at the Government office designated in the solicitation after the exact time specified for receipt of quotes is "late" and may not be considered unless it is received before purchase order issuance and the Contracting Officer determines that accepting the late quote would not unduly delay the acquisition.

(3) If an emergency or unanticipated event interrupts normal Government processes so that quotes cannot be received at the Government office designated for receipt of quotes by the exact time specified in the Request for Quote, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of quotes will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(g) Issuance of Purchase Order. The Government may issue a purchase order to one or more quoters as identified in the Request for Quote (RFQ). Therefore, the quoter’s https://www.acquisition.gov/far/part-4#FAR_Subpart_4_10

Effective Date: 04/18/2025 Revision: 02 initial quote should contain the best terms from a price and technical standpoint.

However, the Government may reject any or all quotes if such action is in the public’s best interest. In addition, the Contracting Officer (CO) may issue a purchase order to other than the quoter with the lowest quoted price.

(h) Multiple awards. The Government may accept issue a purchase order for any item or group of items of a quotation, unless the quoter qualifies the quotation by specific limitations. Unless otherwise provided in the quotation, offers may not be submitted for quantities less than those specified in the RFQ. The Government reserves the right to issue a purchase order for a quantity less than the quantity quoted, at the unit prices quoted, unless the quoter specifies otherwise in the quote.

(i) Availability of requirements documents cited in the solicitation.

(1)

(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101–29, and copies of Federal specifications, standards, and product descriptions can be downloaded from the ASSIST website at https://assist.dla.mil.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained from the address in paragraph (i)(1)(i) of this provision.

(2) Most unclassified Defense specifications and standards may be downloaded from the ASSIST website at https://assist.dla.mil.

(3) Defense documents not available from the ASSIST website may be requested from the Defense Standardization Program Office by—

(i) Using the ASSIST feedback module ( https://assist.dla.mil/feedback); or

(ii) Contacting the Defense Standardization Program Office by telephone at 571–767–6688 or email at assisthelp@dla.mil.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(j) Unique entity identifier.(Applies to all quotes that exceed the micro-purchase threshold, and quotes at or below the micro-purchase threshold if the Request for Quote (RFQ) requires the Contractor to be registered in the System for Award Management (SAM).) The quoter shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity https://assist.dla.mil/ https://assist.dla.mil/ https://assist.dla.mil/feedback mailto:assisthelp@dla.mil

Effective Date: 04/18/2025 Revision: 02 identifier that identifies the Quoter's name and address. The Quoter also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Quoter to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Quoter does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Quoter should indicate that it is an planning to submit a quote for a Government Request for Quote (RFQ) when contacting the entity designated at www.sam.gov for establishing the unique entity identifier.

(k) [Reserved]

(l) Notification. The CO will not notify unsuccessful quoters that responded to this Request for Quotation (RFQ).

(End of provision)

To facilitate the award process, all quotes must include a statement regarding the terms and conditions herein as follows:

"The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition."

OR

"The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:"

Quoters shall list exception(s) and rationale for the exception(s), if any.

Submission of your response shall be received not later than 12 PM EST on Friday March 13, 2026 to Molly.Greening@va.gov

Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f).

Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the Point of Contact listed below by 7 AM EST on Monday, November 24, 2025.

Point of Contact

Contract Specialist Molly Greening Molly.Greening@va.gov https://www.acquisition.gov/far/part-32#FAR_Subpart_32_11 http://www.sam.gov/ http://www.sam.gov/

STATEMENT OF WORK

VA MEDICAL CENTER TOGUS

TME PATHOLOGY RENOVATION – PHASE 1

MOBILE CASEWORK PROCUREMENT PACKAGE

VA Maine Healthcare System

One VA Center

Building 200

Augusta Maine, 04330

Page | 2

Statement of Work

General Scope Statement

Procurement Delivery REQUIREMENT: ASAP

1.0 General Scope:

The Veterans Health Administration (VHA) has a requirement for laboratory casework for the renovation of the Pathology and Laboratory located at the VAMC Togus campus in Augusta

ME. The casework must meet or exceed the VHA specifications for Lab Safety, promote environmental stewardship, and integrate with the laboratory design.

This requirement includes laboratory mobile casework and professional installation. The contractor shall provide all labor, materials, product, equipment, transportation, and supervision necessary to fulfill the requirement outlined herein.

2.0 Performance Requirement/Specifications:

The contractor shall provide and be responsible for the technical assistance, development and creation of final specifications and installation documents.

Casework delivery and installation must be included. Tentative delivery is scheduled for April

2026; any delay in construction may affect delivery schedules. No on-site storage will be provided.

All items must be unboxed, and all packaging material must be removed from site upon completion of installation by the vendor.

Duty hours will be 7AM-3:30PM, Monday-Friday. The Government recognized US holidays are:

New Year’s Day, Martin Luther King, Jr. Day, Presidents Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans Day, Thanksgiving Day and Christmas Day. If the holiday falls on Sunday, it is observed on Monday.

The contractor shall:

a. Coordinate and provide project management of all products and services. Manage, communicate with COR Space Planner Sharon Steele, verify design, order, ship, deliver and install new casework from the manufacturer until final acceptance by the

Contracting Officer Representative (COR)/ VA Point of Contact.

b. Contractor is required to have on site staff supervisor with OSHA 10 certification.

c. Contractor is required to completely install all casework and associated components and accessories.

Page | 3

d. Project scheduling requirements to include planning, project management and installation of all products and components.

e. Provide maintenance manuals and warranty information for all products specified.

3.0 KICKOFF MEETING

The prime contractor(s) shall participate in a kickoff meeting within ten (10) days of task order issuance. Time and date of the meeting will be determined by VA Point of Contact.

4.0 SUBMISSION OF QUESTIONS

Questions: All questions submitted for this solicitation must be electronically sent to the

Contracting Officer. Questions received after the established solicitation date and time may be addressed at the discretion of the Contracting Officer.

5.0 SUBMISSION OF QUOTATION

Quote Submission: The prime contractor(s) shall submit complete emailed electronic copy portable document format (pdf) or Microsoft Excel (xls) format of:

Volume 1: (technical)

a. Drawings, (floorplans, isometrics, shop drawings, typicals, etc.)

b. Complete manufacturer’s product specifications

c. Bill of Materials tagged per CLIN/ floorplan department and room etc.

d. Quantity of man hours for labor/installation

e. Project management plan

f. Product literature

g. Project staffing plan

h. Physical finish samples

i. Sustainability certification documents

j. Complete testing results / certificates

k. Mockup samples (if applicable)

l. Warranty

m. Self-certifying statement confirming ability to meet project deadlines

Volume 2: (pricing)

a. Price quote with separate line for labor/installation

b. Bill of Materials with subtotals and tagged per CLIN

Submissions can be sent in multiple emails to avoid computer system email size limitation.

Page | 4

Quotes submitted by any other method will not be considered. All proprietary information shall be clearly marked. The use of hyperlinks in quotes is prohibited. Late quotes will not be accepted for evaluation. The contractor is responsible for confirming the Government’s receipt of the contractor’s quote.

6.0 EVALUATION CRITERIA

Task order will be evaluated on:

a. Bill of Materials with subtotals and tagged per CLIN

b. Cut sheets with product detail for each line item.

c. Labor/Services appropriate to the scope of work. (no pricing included)

d. Project staffing plan appropriate to scope of work

e. Project management plan appropriate to scope of work

f. Sustainability Certification

7.0 PRODUCT

General

All finished surfaces shall be free of scratches, mars, dents, or blemishes, and withstand staining, flaking, cracking, or loss or adhesion.

Casework shall have smooth finishes with no hazardous projections, sharp corners, or detail, which can be hazardous and cause personal injury or damage to clothing.

The basis of design (BOD)for this procurement is Mott Manufacturing Optima 2100 Bench

Systems, single sided bench with 2” square rear uprights and 2” square legs, plus accessories.

Basis of design refers to the design intent and criteria that bridge project requirements and technical specifications to ensure alignment with objectives. To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must-

1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by-

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

Page | 5

8.0 SERVICES

Contract Tasks/Requirements

a. The contractor shall attend a minimum of three meetings (time and date to be determined by VA Point of Contact) to review final award with VA POC and End Users and to make necessary revisions.

b. The contractor shall be responsible for taking and applying accurate field measurements to ordered product for verification of correct sizing. Auto-Cad drawings may not be accurate and may not be used in place of field measurements. The Vendor shall be liable for any incorrect field measurements leading to incorrect product order.

c. The contractor shall be responsible for providing all sample materials for awarded product (2-

Day Delivery) as requested by VA POC.

d. The product must not be placed into production without clearance from the VA POC.

e. The contractor shall track manufacturing schedule and notify VA POC with updates of estimated completion date by email.

f. The contractor shall attend a post-installation meeting to assess, address, and document any punch-list items and shall submit to the VA POC a remediation plan within 5 business days.

g. The contractor shall provide 30 days free storage.

The Government maintains the option to modify the normal work week, days and hours, as necessary for the accomplishment of VHA mission.

ATTACHMENT A

Category: Mobile Casework

GENERAL REQUIREMENTS FOR CASEWORK

All counter tops 1" thick epoxy

3 steel shelves per set up

Hanging cabinets per schedule

2 circuits per bench

2 Cat 6A per bench

Shelving to be painted steel All exposed ends of casework to be finished

Drill in field holes for xg3-ø3" grommet as required at workstations MOBILE CASEWORK and ACCESSORIES

Salient Characteristics: to include minimum of the following specifications:

Page | 6

ATTACHMENT A

Basis of Design is Mott Manufacturing Optima 2100 – Square Bench Systems

Single sided bench with 2” square rear uprights and 2” square legs

Self-supporting benches with either fixed or adjustable-height work surfaces

Pre-plumbed and pre-wired quick connect mechanical service fixtures are used in conjunction with overhead service carriers or ceiling panels

Shelving and work surfaces adjustable in 1″ increments

Selected Finishes per Basis of Design Casework Frame: Bright White Casework doors and drawers: Bright White Shelving: Bright White Shelving Hardware: Bright White Phenolic Countertop: Gray Racks Brackets: Off White Powder Coat Grommets: Gray

Required Items:

LIN Description Basis of Design BOD JSN # Total QTY

Lab Table 30”X48" table with work surface E0721A 3

02 Lab Table 30”X60" table with work surface E0721C 4

03 Lab Table W/SHLV, HYD 30”X48" table w/shelving, HYD with undershelf lighting with work surface

E0722AH 2

04 Lab Table W/SHLV 36"X48" table w shelving and work surface, with undershelf lighting

E0722B 1

05 Lab Table HYD 30”X60" table, HYD Adj, with work surface

E0721CH 2

06 Lab Table W/SHLV 36"X60" table w shelving and work surface, with undershelf lighting

E0722D 2

07 Lab Table W/SHLV 30"X48" table w shelving and work surface, with undershelf lighting

E0722A 2

08 Lab Table W/SHLV 36"X72" table w shelving and work surface, with undershelf lighting

EO722E 2

09 Lab Table W/SHLV 30"X60" table w shelving and work surface, with undershelf lighting

E0722C 1

10 Suspended Cabinet Suspended Full Door Unit with Writing Tablet

E0723 3

Page | 7

LIN Description Basis of Design BOD JSN # Total QTY

11 Suspended Cabinet

Suspended 4 Drawer unit with Writing Tablet

E0724 2

12 Suspended Cabinet

Suspended Door/Drawer unit with Writing Tablet

E0725 7

13 Suspended Cabinet

Suspended Open Cabinet with pullout, hanging

E0726 5

CC - CONTRACTOR-FURNISHED, CONTRACTOR-INSTALLED

VC - VA-FURNISHED, CONTRACTOR-INSTALLED

VV - VA-FURNISHED, VA-INSTALLED

R - RELOCATED

ALL MANUFACTURER/MODELS BASIS OF DESIGN UNLESS

OTHERWISE NOTED.

FURNISHING & INSTALLATION KEY CODES

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

ISSUED FOR

CONSTRUCTION

FULLY

SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E PhaseARCHITECT STAMPCONSULTANTS 402-18-620

VA MAINE HEALTHCARE SYSTEM - TOGUS

PATHOLOGY & LABORATORY

MEDICINE RENOVATION

William Pevear Architects, Inc.

872 Massachusetts Ave. Suite 2-9 Cambridge, MA 02139

T: 617.335.5186

Andre Gill Engineering, LLC

40 Overlea Road North Smithfield, RI 02896

T: 401.441.3414

MECH/PLUMB ENGINEER:

Architectural Engineers, Inc.

63 Franklin Street Boston, MA 02110

T: 617.542.0810

ELEC/FP ENGINEER:

Drawing Scale

RSE Associates, Inc.

63 Pleasant Street, Suite 300 Watertown, MA 02472

T: 617.926.9300

STRUCTURAL ENGINEER:

321 4 5 6 7 8

A

B

C

D

E

321 4 5 6 7 8

1 VA CENTER AUGUSTA, ME 04330

02/13/2020

C :\U se rs

\a do rn .W

PA

\D oc um en ts

\V A

To gu s Pa th ol og y an d

La bo ra to ry M ed ic in e

R en ov at io n_ ad or n@ w illi am pe ve a r .c om . rv t 2/

/2

5:

:5

PM

As indicated

AS601A

157/157A HISTOLOGY ROOM

DATA SHEET

BUILDING 200 - LEVEL 1 BUILDING 200 - LEVEL 2

157 Histology - Furniture & Equipment Schedule

EXIST.

LOC.

LOCATION BY PHASE

# TAG CODE DESCRIPTION MANUFACTURER (B.O.D./EXISTING) MODEL (B.O.D./EXISTING)

FURN/INSTALL POWER & IT WATER OTHER

PH1 PH2 PH3

CONST.

COMPL. VC VV CC R RE

G.

EM

ER

G.

UP

S

DA

TA

CO

LD

HO

T

DR

AI

N

PU

R.

EX

H.

GA

S

Furniture -- -- -- (N) (N) 1 A1030 LOCKER BRADLEY LENOX Z-LOCKER 15"WX18"DX72"H - + - - - - - - - - - - - - -- -- -- (N) (N) 1 E0721A LAB TBL MOTT MANUFACTURING OPTIMA 2100-SQ, 30"X48" TABLE - + - - - - - - - - - - - - -- -- -- (N) (N) 3 E0721C LAB TBL MOTT MANUFACTURING OPTIMA 2100-SQ, 30"X60" TABLE - + - - - - - - - - - - - - -- -- -- (N) (N) 1 E0722B LAB TBL W/SHLV MOTT MANUFACTURING OPTIMA 2100-SQ, 36"X48" TABLE W/ SHELVING - + - - + + + + - - - - - - -- -- -- (N) (N) 1 E0722C LAB TBL W/SHLV MOTT MANUFACTURING OPTIMA 2100-SQ, 30"X60" TABLE W/ SHELVING - + - - + + + + - - - - - - -- -- -- (N) (N) 2 E0722D LAB TBL W/SHLV MOTT MANUFACTURING OPTIMA 2100-SQ, 36"X60" TABLE W/ SHELVING - + - - + + + + - - - - - - -- -- -- (N) (N) 5 E0725C SUSP. CAB. DOOR/DRAWER/WRITING TABLET MOTT MANUFACTURING 1150222 - + - - - - - - - - - - - - -- -- -- (N) (N) 1 E0725D SUSP.CAB. DOOR/DRAWER/WRITING TABLET MOTT MANUFACTURING 1250222 - + - - - - - - - - - - - - -- -- -- (N) (N) 1 E0726G SUSP. CAB. OPEN SHELF/WRITING TABLET MOTT MANUFACTURING 1350000 - + - - - - - - - - - - - - -- -- -- (N) (N) 3 E0727 SUSP. CPU HOLDER MOTT MANUFACTURING CPU1010 - + - - - - - - - - - - - - -- -- -- (N) (N) 4 F0240 TASK CHAIR ALLSEATING - FOSTER GROUP 18025-WA-FA-F-OCDAN TASK CHAIR - + - - - - - - - - - - - - Specialty Equipment

-- -- -- (N) (N) 2 A5075 SOAP BOBRICK B-26607 - - + - - - - - - - - - - -

-- -- -- (N) (N) 2 A5080 PAPER TWL KIMBERLY CLARK VA TOGUS STANDARD SURFACE MOUNT MANUAL PT - - + - - - - - - - - - - - (E)157 (E) (T) (N) (N) 2 A5106 SHARPS DISPOSAL VARIES SHARPS DISPOSAL - + - + - - - - - - - - - - (E)157 (E) (T) (N) (N) 1 E0948A WASTE CART EXISTING WASTE CART - + - + - - - - - - - - - - (E)157 (E) (T) (N) (N) 1 F2026 REC. BIN EXISTING RECYCLE BIN - + - + - - - - - - - - - - (E)157 (E) (T) (N) (N) 1 L1401 OVEN UC EXISTING OVEN - UC - + - + - + - - - - - - - - (E)157 (E) (T) (N) (N) 1 L1402 TISSUE PROCESSOR 1 SAKURA TISSUE TEK VIP 5 - + - + - + + + - - - - - - (E)157 (E) (T) (N) (N) 1 L1403 TISSUE PROCESSOR 2 SAKURA TISSUE TEK VIP 6 - + - + - + + + - - - - - - -- -- (T) (N) (N) 1 L1502 CART METRO STARSYS, STANDARD, 24"WX23"DX36"H - + - - - - - - - - - - - - (E)157 (E) (T) (N) (N) 1 L1602 PUR. WATER U/C MILLI-Q WATER FILTRATION SYSTEM - + - + - + - - - - - - - - (E)157 (E) (T) (N) (N) 1 L1700 BIOSAFETY HOOD EXISTING BIOSAFETY HOOD - + - + - - - - - - - - + - (E)157 (E) (T) (N) (N) 1 L1701 GROSSING STATION GROSSLAB SENIOR - + - + - + + + + + + - + - (E)157 (E) (T) (N) (N) 2 L1801 COMPUTER INSTR. VARIES COMPUTER, DED. TO INST. - + - + - + + + - - - - - - (E)157 (E) (T) (N) (N) 1 L2206 CENTRIFUGE SILENCER S2 110SP - + - + - + - - - - - - - - (E)157 (E) (T) (N) (N) 1 L2400 MICROSCOPE NIKON MICROSCOPE - + - + - + - - - - - - - - (E)157 (E) (T) (N) (N) 1 L2401 VORTEXER FISHER SCIENTIFIC MINIROTO - + - + - + - - - - - - - - (E)157 (E) (T) (N) (N) 2 L2402 WATER BATH EXISTING WATER BATH - + - + - + - - - - - - - (E)157 (E) (T) (N) (N) 1 L2407 HOT PLATE/ STIRRER EXISTING HOT PLATE - + - + - + - - - - - - - (E)157 (E) (T) (N) (N) 1 L2408 AUTO. STAIN. THERMO SCIENTIFIC VERISTAIN GEMINI - + - + - + + + - - + - + - (E)157 (E) (T) (N) (N) 1 L2409 EMBED. W.S. THERMO SCIENTIFIC HISTOSTAR - + - + - + - - - - - - - - (E)157 (E) (T) (N) (N) 1 L2410 COLD PLATE THERMO SCIENTIFIC HISTOCENTRE 3 - + - + - + - - - - - - - - (E)157 (E) (T) (N) (N) 2 L2411 CASSETTE PRINTER THERMO PRINTMATE AS - + - + - + + + - - - - - - (E)157 (E) (T) (N) (N) 1 L2412 VORTEXER FISHER SCIENTIFIC MINIROTO - + - + - + - - - - - - - - (E)157 (E) (T) (N) (N) 1 L2413 OVEN - SMALL EXISTING OVEN - COUNTERTOP - + - + - + - - - - - - - - (E)157 (E) (T) (N) (N) 2 L2414 MICROTOME LEICA HISTOCORE AUTOCUT - + - + - + - - - - - - - - (E)157 (E) (T) (N) (N) 2 L2415 SAMPLE PROCESSOR CYTYC THINPREP 2000 - + - + - + + - - - - - - - (E)157 (E) (T) (N) (N) 1 L2416 CRYOSTAT LEICA CRYOSTAT - + - + - + + - - - - - - - (E)157 (E) (T) (N) (N) 1 L2600 PUR. WATER RES. U/C MILLI-Q WATER FILTRATION SYSTEM RESERVIOR - + - + - + - - - - - + - - (E)157 (E) (T) (N) (N) 1 L2800 SLIDE PRINTER THERMO SCIENTIFIC SLIDE MATE - + - + - + + + - - - - - - (E)157 (E) (T) (N) (N) 2 L2801 SLIDE PRINTER THERMO SCIENTIFIC SLIDE MATE - + - + - + + + - - - - - - -- -- -- (N) (N) 4 M1015 VOIP PHONE VARIES VOIP TELEPHONE, DESKTOP - + - - - - - + - - - - - - -- -- (T) (N) (N) 4 M1801 NETWORK COMPUTER VARIES DESKTOP COMPUTER - + - - - + + + - - - - - - (E)157 (E) (T) (N) (N) 1 M1830 LABEL PRINTER EXISTING EXISTING - + - + - + + + - - - - - - (E)157 (E) (T) (N) (N) 1 M1841 MFD VARIES MFD - MULTIFUNCTIONAL DEVICE, DESKTOP - + - + - + + + - - - - - - (E)157 (E) (T) (N) (N) 2 M1842 HAND SCANNER EXISTING HAND SCANNER - + - + - - - - - - - - - - (E)157 (E) (T) (N) (N) 1 M2015 FLAMMABLE STRG EXISTING FLAMMABLE STORAGE CABINET - + - + - - - - - - - - - - (E)170 (E) (T) (N) (N) 1 M2015 FLAMMABLE STRG EXISTING FLAMMABLE STORAGE CABINET - + - + - - - - - - - - - - (E)157 (E) (T) (N) (N) 1 R6284 REF. THERMO HALF-HEIGHT REFRIGERATOR - + - + - + - - - - - - - -

157A - Histology Office - Furniture & Equipment Schedule

EXIST.

LOC.

LOCATION BY PHASE

# TAG CODE DESCRIPTION MANUFACTURER (B.O.D./EXISTING) MODEL (B.O.D./EXISTING)

FURN/INSTALL POWER & IT WATER OTHER

PH1 PH2 PH3

CONST.

COMPL. VC VV CC R RE

G.

EM

ER

G.

UP

S

DA

TA

CO

LD

HO

T

DR

AI

N

PU

R.

EX

H.

GA

S

Furniture -- -- -- (N) (N) 1 E0118 ADJ DESK HERMAN MILLER DU6ACS.3072LE - + - - + - - - - - - - - - -- -- -- (N) (N) 1 E0126 WKSTN HERMAN MILLER CANVAS SERIES WORKSTATION - + - - - - - - - - - - - - -- -- -- (N) (N) 1 F0240 TASK CHAIR ALLSEATING - FOSTER GROUP 18025-WA-FA-F-OCDAN TASK CHAIR - + - - - - - - - - - - - - -- -- -- (N) (N) 2 F0420 LAT. FILE CAB. HON H883 36"Wx18"Dx39"H, CHARCOAL - + - - - - - - - - - - - - Specialty Equipment -- -- -- (N) (N) 1 M1015 VOIP PHONE VARIES VOIP TELEPHONE, DESKTOP - + - - - - - + - - - - - - -- -- -- (N) (N) 1 M1801 NETWORK COMPUTER VARIES DESKTOP COMPUTER - + - - - + + + - - - - - - -- -- -- (N) (N) 1 M1825 DESKTOP PRINTER VARIES DESKTOP PRINTER - + - - - + + + - - - - - -

Revision: Date:

PHASE 2

HISTOLOGY

HISTOLOGY

OFFICE

157A

L1700

BIOSAFETY

HOOD

L2411

CASSETTE

PRINTER

M1841

MFD

L1701

GROSSING

STATION

L2416

CRYOSTAT

L2411

CASSETTE

PRINTER

L1403

TISSUE

PROCESSOR

L1402

TISSUE

PROCESSOR

E0948A

WASTE

CART

L2400

MICROSCOPE

M1801

NETWORK

COMPUTER

L2408

AUTO.

STAIN.

L2206

CENTRIFUGE

L2415

SAMPLE

PROCESSOR

L2407

HOT

PLATE/

STIRRER

M1830

LABEL

PRINTER

M1015

VOIP

PHONE

L1602

PUR.

WATER

U/C

L2415

SAMPLE

PROCESSOR

L1401

OVEN UC

E0126

WKSTN

E0118

ADJ

DESK

F0240

TASK

CHAIR

M2015

FLAMMABLE

STRG

M1801

NETWORK

COMPUTER

F2026

REC. BIN

L2410

COLD

PLATE

L2402

WATER

BATH

L2414

MICROTOME

L2409

EMBED.

W.S.

L2413

OVEN -

SMALL

L2402

WATER

BATH

L2801

SLIDE

PRINTER

L2801

SLIDE

PRINTER

L2414

MICROTOME

A5106

SHARPS

DISPOSAL

A5106

SHARPS

DISPOSAL

M1801

NETWORK

COMPUTER

L2800

SLIDE

PRINTER

M1015

VOIP

PHONE

M1801

NETWORK

COMPUTER M1015

VOIP

PHONE

M1015

VOIP

PHONE

F0240

TASK

CHAIR

M1015

VOIP

PHONE

F0240

TASK

CHAIR

F0240

TASK

CHAIR

F0240

TASK

CHAIR

M1801

NETWORK

COMPUTER

L1801

COMPUTER

INSTR.

M1842

HAND

SCANNER

L1801

COMPUTER

INSTR.

M1842

HAND

SCANNER

L2412

VORTEXER

L2401

VORTEXER

F0420

LAT. FILE

CAB.

M2015

FLAMMABLE

STRG

R6284

REF. UC

L1502

CART

A5080

PAPER

TWL

'-7

4 7

/8" 8'-

6"

EDCBA

L2600

PUR.

WATER

RES. U/C

MARKER BOARD

TACK BOARD

F0420

LAT. FILE

CAB.

A5080

PAPER

TWL

A5075

SOAP

E0721C

LAB TBL

B157F E0721A

LAB TBL

B157E

E0721C

LAB TBL

B157H

E0722D

LAB TBL

W/SHLV

B157C

E0722B

LAB TBL

W/SHLV

B157D

E0722C

LAB TBL

W/SHLV

B157B

A1030

LOCKER

E0721C

LAB TBL

B157A

M1825

DESKTOP

PRINTER

(2) VENTED ACID CABINETS BELOW

9'-6 3/4" 1'-10 1/2" 19'-1 1/4" 4 7/8" 8'-2 7/8"

9'-

7/ 8"

14'-1 1/2"

5'-1 3/4" 22'-7 1/4"

'-8

CUTTING/EMBEDDING AREA

E0722D

LAB TBL

W/SHLV

B157A

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

ISSUED FOR

CONSTRUCTION

FULLY

SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E PhaseARCHITECT STAMPCONSULTANTS 402-18-620

VA MAINE HEALTHCARE SYSTEM - TOGUS

PATHOLOGY & LABORATORY

MEDICINE RENOVATION

William Pevear Architects, Inc.

872 Massachusetts Ave. Suite 2-9 Cambridge, MA 02139

T: 617.335.5186

Andre Gill Engineering, LLC

40 Overlea Road North Smithfield, RI 02896

T: 401.441.3414

MECH/PLUMB ENGINEER:

Architectural Engineers, Inc.

63 Franklin Street Boston, MA 02110

T: 617.542.0810

ELEC/FP ENGINEER:

Drawing Scale

RSE Associates, Inc.

63 Pleasant Street, Suite 300 Watertown, MA 02472

T: 617.926.9300

STRUCTURAL ENGINEER:

321 4 5 6 7 8

A

B

C

D

E

321 4 5 6 7 8

1 VA CENTER AUGUSTA, ME 04330

02/13/2020

C :\U se rs

\a do rn .W

PA

\D oc um en ts

\V A

To gu s Pa th ol og y an d

La bo ra to ry M ed ic in e

R en ov at io n_ ad or n@ w illi am pe ve a r .c om . rv t 2/

/2

5:

:0

PM

1/2" = 1'-0"

AS601B

157/157A HISTOLOGY ROOM

DATA SHEET

Revision: Date:

VV - VA-FURNISHED, VA-INSTALLED

R - RELOCATED

ALL MANUFACTURER/MODELS BASIS OF DESIGN UNLESS

OTHERWISE NOTED.

FURNISHING & INSTALLATION KEY CODES

BLOOD BANK

R6282

REFRIGERATOR

- 2 DOOR

L2418

TUBE

INC.

R5001

PLASMA

FREEZER

L2802

THERMAL

PRINTER

M1830

LABEL

PRINTER

L2110

BLOOD

TESTING

SYSTEM

L2400

MICROSCOPE

L2417

PLASMA

THAWER

L2402

WATER

BATH L2419

AGGLUT.

VIEWER

L2501

BLOOD

SAMPLE

RACK

L2204

CENTRIFUGE

L2502

PIPETTE

M1801

NETWORK

COMPUTER

R5004

ICE

MACHINE

M1801

NETWORK

COMPUTER

M1015

VOIP

PHONE

F0240

TASK

CHAIR

F0240

TASK

CHAIR

F0240

TASK

CHAIR

L2418

TUBE

INC.

L2419

AGGLUT.

VIEWER

L2501

BLOOD

SAMPLE

RACK

L2204

CENTRIFUGE

L2502

PIPETTE

M1801

NETWORK

COMPUTER

L3400

INST.

MONITOR

M1801

NETWORK

COMPUTER

M1842

HAND

SCANNER

M1842

HAND

SCANNER

M1842

HAND

SCANNER

M1825

DESKTOP

PRINTER

F0420

LAT. FILE

CAB.

26'-3 1/8"

R6010

INCUBATOR

F0418

PT CARD

FILE

CAB.

L2205

CENTRIFUGE

F0420

LAT. FILE

CAB.

F0420

LAT. FILE

CAB.

EDCB

C267C 0"W x 24"D

FH - 11

M1842

HAND

SCANNER

E0721C

LAB TBL

B267E

E0722A

LAB TBL

W/SHLV

B267D

E0722AH

LAB TBL

W/SHLV

HYD

B267C

E0722AH

LAB TBL

W/SHLV

HYD

B267A

E0722A

LAB TBL

W/SHLV

'-1

E0722A

LAB TBL

W/SHLV

B267B

E0721C

LAB TBL

B267E

E0721A

LAB TBL

B267F

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

ISSUED FOR

CONSTRUCTION

FULLY

SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E PhaseARCHITECT STAMPCONSULTANTS 402-18-620

VA MAINE HEALTHCARE SYSTEM - TOGUS

PATHOLOGY & LABORATORY

MEDICINE RENOVATION

William Pevear Architects, Inc.

872 Massachusetts Ave. Suite 2-9 Cambridge, MA 02139

T: 617.335.5186

Andre Gill Engineering, LLC

40 Overlea Road North Smithfield, RI 02896

T: 401.441.3414

MECH/PLUMB ENGINEER:

Architectural Engineers, Inc.

63 Franklin Street Boston, MA 02110

T: 617.542.0810

ELEC/FP ENGINEER:

Drawing Scale

RSE Associates, Inc.

63 Pleasant Street, Suite 300 Watertown, MA 02472

T: 617.926.9300

STRUCTURAL ENGINEER:

321 4 5 6 7 8

A

B

C

D

E

321 4 5 6 7 8

1 VA CENTER AUGUSTA, ME 04330

02/13/2020

C :\U se rs

\a do rn .W

PA

\D oc um en ts

\V A

To gu s Pa th ol og y an d

La bo ra to ry M ed ic in e

R en ov at io n_ ad or n@ w illi am pe ve a r .c om . rv t 2/

/2

5:

:2

PM

As indicated

AS605

267 BLOOD BANK ROOM DATA

SHEET

SCALE:

1A RDS Axon - 267 - Blood Bank

BUILDING 200 - LEVEL 1 BUILDING 200 - LEVEL 2

267 - Blood Bank - Furniture & Equipment Schedule

EXIST.

LOC.

LOCATION BY PHASE

# TAG CODE DESCRIPTION MANUFACTURER (B.O.D./EXISTING) MODEL (B.O.D./EXISTING)

FURN/INSTALL POWER & IT WATER OTHER

PH1 PH2 PH3

CONST.

COMPL. VC VV CC R RE

G.

EM

ER

G.

UP

S

DA

TA

CO

LD

HO

T

DR

AI

N

PU

R.

EX

H.

GA

S

Furniture -- (T) (T) (N) (N) 1 E0721A LAB TBL MOTT MANUFACTURING OPTIMA 2100-SQ, 30"X48" TABLE - + - - - - - - - - - - - - -- (T) (T) (N) (N) 1 E0721C LAB TBL MOTT MANUFACTURING OPTIMA 2100-SQ, 30"X60" TABLE - + - - - - - - - - - - - - -- (T) (T) (N) (N) 2 E0722A LAB TBL W/SHLV MOTT MANUFACTURING OPTIMA 2100-SQ, 30"X48" TABLE W/ SHELVING - + - - - + + + - - - - - - -- (T) (T) (N) (N) 2 E0722AH LAB TBL W/SHLV HYD MOTT MANUFACTURING OPTIMA 2100-SQ, 30"X48" TABLE W/ SHELVING, HYD.

ADJ.

-- (T) (T) (N) (N) 1 E0723C SUSP. CAB. 1-DOOR/WRITING TABLET MOTT MANUFACTURING 1150011 - + - - - - - - - - - - - - -- (T) (T) (N) (N) 2 E0723E SUSP. CAB. 1-DOOR/WRITING TABLET MOTT MANUFACTURING 1250011 - + - - - - - - - - - - - - -- (T) (T) (N) (N) 2 E0724C SUSP. CAB. 4-DRAWER/WRITING TABLET MOTT MANUFACTURING 1150066 - + - - - - - - - - - - - - -- (T) (T) (N) (N) 3 E0727 SUSP. CPU HOLDER MOTT MANUFACTURING CPU1010 - + - - - - - - - - - - - - -- (T) (T) (N) (N) 3 F0240 TASK CHAIR ALLSEATING - FOSTER GROUP 18025-WA-FA-F-OCDAN TASK CHAIR - + - - - - - - - - - - - - -- (T) (T) (N) (N) 1 F0418 PT CARD FILE CAB. HON H19723R - + - - - - - - - - - - - - -- (T) (T) (N) (N) 3 F0420 LAT. FILE CAB. HON H883 36"Wx18"Dx39"H, CHARCOAL - + - - - - - - - - - - - - Specialty Equipment

-- -- -- (N) (N) 1 A5075 SOAP BOBRICK B-26607 - - + - - - - - - - - - - -

-- -- -- (N) (N) 1 A5080 PAPER TWL KIMBERLY CLARK VA TOGUS STANDARD SURFACE MOUNT MANUAL PT - - + - - - - - - - - - - - (E)266 (T) (T) (N) (N) 1 L2110 BLOOD TESTING SYSTEM ORTHO CLINICAL DIAGNOSTICS WORKSTATION - + - + - + + - - - - - - - (E)266 (T) (T) (N) (N) 2 L2204 CENTRIFUGE CLAY ADAMS SEROFUGE 2001 - + - + - + - - - - - - - - (E)266 (T) (T) (N) (N) 1 L2205 CENTRIFUGE GFMD SILENCER - + - + - + - - - - - - - - (E)266 (T) (T) (N) (N) 1 L2400 MICROSCOPE NIKON MICROSCOPE - + - + - + - - - - - - - - (E)266 (T) (T) (N) (N) 1 L2402 WATER BATH CMS 392-134 - + - + - + - - - - - - - - (E)266 (T) (T) (N) (N) 1 L2417 PLASMA THAWER CYTOTHERM D4 - + - + - + - - - - + - - - (E)266 (T) (T) (N) (N) 2 L2418 TUBE INC. ORTHO CLINICAL DIAGNOSTICS ID-MICRO TYPING SYSTEM, INCUBATOR - + - + - + - - - - - - - - (E)266 (T) (T) (N) (N) 2 L2419 AGGLUT. VIEWER CLAY ADAMS AGGLUTINATION VIEWER - + - + - + - - - - - - - - (E)266 (T) (T) (N) (N) 2 L2501 BLOOD SAMPLE RACK EXISTING SAMPLE RACK - + - + - - - - - - - - - - (E)266 (T) (T) (N) (N) 2 L2502 PIPETTE EXISTING PIPETTE ON STAND - + - + - - - - - - - - - - (E)266 (T) (T) (N) (N) 1 L2802 THERMAL PRINTER ZEBRA Z4MPLUS - + - + - + - + - - - - - - (E)266 (T) (T) (N) (N) 1 L3400 INST. MONITOR HELMER INSTRUMENT MONITOR - + - + - + + + - - - - - - -- (T) (T) (N) (N) 1 M1015 VOIP PHONE VARIES VOIP TELEPHONE, DESKTOP - + - - - - - + - - - - - - -- (T) (T) (N) (N) 4 M1801 NETWORK COMPUTER VARIES DESKTOP COMPUTER - + - - - + + + - - - - - - -- (T) (T) (N) (N) 1 M1825 DESKTOP PRINTER VARIES DESKTOP PRINTER - + - - - + + + - - - - - - (E)266 (T) (T) (N) (N) 1 M1830 LABEL PRINTER ZEBRA GX420 - + - + - + + + - - - - - - (E)266 (T) (T) (N) (N) 4 M1842 HAND SCANNER EXISTING HAND SCANNER - + - + - - - - - - - - - - (E)266 (T) (T) (N) (N) 1 R5001 PLASMA FREEZER HELMER FREEZER W/ WALL-MOUNT MONITOR - + - + - + - - - - + - - - (E)258 (T) (T) (N) (N) 1 R5004 ICE MACHINE EXISTING ICE MACHINE - + - + - + - - + - + - - - (E)266 (T) (T) (N) (N) 1 R6010 INCUBATOR THERMO JEWITT INCUBATOR W/ WALL-MOUNT MONITOR - + - + - + - - - - - - - - (E)266 (T) (T) (N) (N) 1 R6282 REFRIGERATOR - 2 DOOR THERMO REVCO - + - + - + - - - - - - - -

SCALE: 1/2" = 1'-0"

1 RDS - Plan - 267 - Blood Bank

Revision: Date:

VV - VA-FURNISHED, VA-INSTALLED

R - RELOCATED

ALL MANUFACTURER/MODELS BASIS OF DESIGN UNLESS

OTHERWISE NOTED.

FURNISHING & INSTALLATION KEY CODES

MICROBIOLOGY

L2106

MICROSCAN

L2108

CEPHIED

L2107

MALDI

L1700

BIOSAFETY

HOOD

L2700

ANAEROBIC

CH.

M1830

LABEL

PRINTER

M1844

DESKTOP

MFD

M1801

NETWORK

COMPUTER

M1015

VOIP

PHONE

F0240

TASK

CHAIR

L2207

CENTRIFUGE

R6283

REF. 3

DOOR

L1300

INC. NON

CO2

L0001

MICROSCOPE

L2111

BD

AFFIRM

M1830

LABEL

PRINTER

M1842

HAND

SCANNER

M1801

NETWORK

COMPUTER

L1801

COMPUTER

INSTR.

L2109

BACTEC

L1801

COMPUTER

INSTR.

L1801

COMPUTER

INSTR.

L1801

COMPUTER

INSTR.

M1801

NETWORK

COMPUTER

F0240

TASK

CHAIR

L2304

INC.

CAMPY

L2302

INC.

FUNGAL

L2303

INC. CO2

- UC

L2301

INC.

QUINCY

M1825

DESKTOP

PRINTER

M1825

DESKTOP

PRINTER

M1825

DESKTOP

PRINTER

M1825

DESKTOP

PRINTER

M1825

DESKTOP

PRINTER

'-6

1/ 2"

L2301

INC.

QUINCY

M1015

VOIP

PHONE

M1842

HAND

SCANNER

M1015

VOIP

PHONE

EDCB

L2109

BACTEC

L2109

BACTEC

E0721A

LAB TBL

B269B

E0721CH

LAB TBL

HYD

B269B

E0721CH

LAB TBL

HYD

B269C

E0722E

LAB TBL

W/SHLV

B269D

E0722E

LAB TBL

W/SHLV

B269E

28'-3 1/8"

Project Number

Building Number

Drawing Number

Project Title

Location

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

A

ISSUED FOR

CONSTRUCTION

FULLY

SPRINKLERED

Office of Construction and Facilities Management

U.S. Department of Veterans Affairs

B

C

D

E PhaseARCHITECT STAMPCONSULTANTS 402-18-620

VA MAINE HEALTHCARE SYSTEM - TOGUS

PATHOLOGY & LABORATORY

MEDICINE RENOVATION

William Pevear Architects, Inc.

872 Massachusetts Ave. Suite 2-9 Cambridge, MA 02139

T: 617.335.5186

Andre Gill Engineering, LLC

40 Overlea Road North Smithfield, RI 02896

T: 401.441.3414

MECH/PLUMB ENGINEER:

Architectural Engineers, Inc.

63 Franklin Street Boston, MA 02110

T: 617.542.0810

ELEC/FP ENGINEER:

Drawing Scale

RSE Associates, Inc.

63 Pleasant Street, Suite 300 Watertown, MA 02472

T: 617.926.9300

STRUCTURAL ENGINEER:

321 4 5 6 7 8

A

B

C

D

E

321 4 5 6 7 8

1 VA CENTER AUGUSTA, ME 04330

02/13/2020

C :\U se rs

\a do rn .W

PA

\D oc um en ts

\V A

To gu s Pa th ol og y an d

La bo ra to ry M ed ic in e

R en ov at io n_ ad or n@ w illi am pe ve a r .c om . rv t 2/

/2

5:

:4

PM

As indicated

AS606

269 MICROBIOLOGY ROOM

DATA SHEET

SCALE:

1A RDS Axon - 269 - Microbiology

BUILDING 200 - LEVEL 1 BUILDING 200 - LEVEL 2

269 - Microbiology - Furniture & Equipment Schedule

EXIST.

LOC.

LOCATION BY PHASE

# TAG CODE DESCRIPTION MANUFACTURER (B.O.D./EXISTING) MODEL (B.O.D./EXISTING)

FURN/INSTALL POWER & IT WATER OTHER

PH1 PH2 PH3

CONST.

COMPL. VC VV CC R RE

G.

EM

ER

G.

UP

S

DA

TA

CO

LD

HO

T

DR

AI

N

PU

R.

EX

H.

GA

S

Furniture -- -- -- (N) (N) 1 E0721A LAB TBL MOTT MANUFACTURING OPTIMA 2100-SQ, 30"X48" TABLE - + - - - - - - - - - - - - -- -- -- (N) (N) 2 E0721CH LAB TBL HYD MOTT MANUFACTURING OPTIMA 2100-SQ, 30"X60" TABLE, HYD. ADJ. - + - - + - - - - - - - - - -- -- -- (N) (N) 2 E0722E LAB TBL W/SHLV MOTT MANUFACTURING OPTIMA 2100-SQ, 36"X72" TABLE W/ SHELVING - + - - - + + + - - - - - - -- -- -- (N) (N) 2 E0724C SUSP. CAB. 4-DRAWER/WRITING TABLET MOTT MANUFACTURING 1150066 - + - - - - - - - - - - - - -- -- -- (N) (N) 1 E0726B SUSP. CAB. OPEN SHELF/WRITING TABLET MOTT MANUFACTURING 1950000 - + - - - - - - - - - - - - -- -- -- (N) (N) 1 E0726E SUSP. CAB. OPEN SHELF/WRITING TABLET MOTT MANUFACTURING 1250000 - + - - - - - - - - - - - - -- -- -- (N) (N) 1 E0726G SUSP. CAB. OPEN SHELF/WRITING TABLET MOTT MANUFACTURING 1350000 - + - - - - - - - - - - - - -- -- -- (N) (N) 1 E0726J SUSP. CAB. OPEN SHELF/WRITING TABLET MOTT MANUFACTURING 1450000 - + - - - - - - - - - - - - -- -- -- (N) (N) 3 E0727 SUSP. CPU HOLDER MOTT MANUFACTURING CPU1010 - + - - - - - - - - - - - - -- -- -- (N) (N) 2 F0240 TASK CHAIR ALLSEATING - FOSTER GROUP 18025-WA-FA-F-OCDAN TASK CHAIR - + - - - - - - - - - - - - Specialty Equipment

-- -- -- (N) (N) 1 A5075 SOAP BOBRICK B-26607 - - + - - - - - - - - - - -

-- -- -- (N) (N) 1 A5080 PAPER TWL KIMBERLY CLARK VA TOGUS STANDARD SURFACE MOUNT MANUAL PT - - + - - - - - - - - - - - (E)270B (E) (E) (N) (N) 1 L0001 MICROSCOPE NIKON MICROSCOPE - + - + - + - - - - - - - - (E)270B (E) (E) (N) (N) 1 L1300 INC. NON CO2 THERMO SCIENTIFIC STERI-CYCLE - + - + - + - - - - - - - - (E)270B (E) (E) (N) (N) 1 L1700 BIOSAFETY HOOD EXISTING BIOSAFETY HOOD - + - + - + - - - - - + - (E)270B (E) (E) (N) (N) 4 L1801 COMPUTER INSTR. VARIES COMPUTER, DED. TO INST. - + - + - + + + - - - - - - (E)270A (E) (E) (N) (N) 1 L2106 MICROSCAN SIEMENS MICROSCAN WALKAWAY 40 PLUS - + - + - + + + - - - - - - (E)270B (E) (E) (N) (N) 1 L2107 MALDI BRUKER MALDI-TOF - + - + - + + + - - - - - - (E)270B (E) (E) (N) (N) 1 L2108 CEPHIED CEPHIED GENEXPERT - + - + - + + + - - - - - - (E)270B (E) (E) (N) (N) 3 L2109 BACTEC BD BACTEC FX40 - + - + - + + + - - - - - -

(E)270B (E) (E) (N) (N) 1 L2111 BD AFFIRM BD AFFIRM - + - + - + + + - - - - - -

(E)270A (E) (E) (N) (N) 1 L2207 CENTRIFUGE CYTOSPIN 4 THERMO SCIENTIFIC - + - + - + - - - - - - - - (E)270B (E) (E) (N) (N) 2 L2301 INC. QUINCY QUINCY INCUBATOR - + - + - + - - - - - - - - (E)270B (E) (E) (N) (N) 1 L2302 INC. FUNGAL PRECISION INCUBATOR-REFRIGERATED - + - + - + - - - - - - - - (E)270E (E) (E) (N) (N) 1 L2303 INC. CO2 - UC THERMO SCIENTIFIC STERI-CYCLE - + - + - + - - - - - - - + (E)270B (E) (E) (N) (N) 1 L2304 INC. CAMPY BOEKEL SCIENTIFIC INCUBATOR - + - + - + - - - - - - - - (E)270B (E) (E) (N) (N) 1 L2700 ANAEROBIC CH. ANAEROBE SYSTEMS AS-580 - + - + - + + - - - - - - + -- -- -- (N) (N) 3 M1015 VOIP PHONE VARIES VOIP TELEPHONE, DESKTOP - + - - - - - + - - - - - - -- -- -- (N) (N) 3 M1801 NETWORK COMPUTER VARIES DESKTOP COMPUTER - + - - - + + + - - - - - - -- -- -- (N) (N) 5 M1825 DESKTOP PRINTER VARIES DESKTOP PRINTER - + - - - + + + - - - - - - (E)270B (E) (E) (N) (N) 2 M1830 LABEL PRINTER EXISTING EXISTING - + - + - + + + - - - - - - (E)270B (E) (E) (N) (N) 2 M1842 HAND SCANNER EXISTING HAND SCANNER - + - + - - - - - - - - - - (E)270B (E) (E) (N) (N) 1 M1844 DESKTOP MFD TBD PRINT/FAX/SCAN - + - - - + + + - - - - - - (E)270E (E) (E) (N) (N) 1 R6283 REF. 3 DOOR THERMO SCIENTIFIC SIM TO MR72PAGAEE - + - + - + - - - - - - - -

SCALE: 1/2" = 1'-0"

1 RDS - Plan - 269 - Microbiology

Revision: Date: