About this file
From the source
36C24118Q0130 Fire Door Assembly Deficiency Price Table.xlsx
Other files for this federal contract opportunity
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The file's text, extracted by GovTribe without its formatting.
Sheet1
| FIRE DOOR ASSEMBLY DEFFICIENCY Price Table | | | | | |
| Deficiency | Price BY | Price OY1 | Price OY2 | Price OY3 | Price OY4 |
| Frame |
| F1 - Missing fire label |
| F2 - Fire label painted over |
| F3 - Damaged frame |
| F4 - Improper frame installation |
| F5 - Improper field modification |
| F6 - Broken / incorrect glass in transom or sidelight |
| F7 - Missing glazing bead screws |
| F8 - Missing glazing bead |
| F9 - Missing silencers |
| F10 - Unused fastener holes |
| F11 - Fire Label Unreadable |
| Door |
| D1 - Missing fire label |
| D2 - Fire label painted over |
| D3 - Door not rated |
| D4 - Door missing |
| D5 - Door damaged or face delamination |
| D6 - Hardware missing or incorrect |
| D7 - Improper field modification |
| D8 - Incorrect vision lite or size |
| D9 - Broken/incorrect glass in vision lite |
| D10 - Missing vision lite screws |
| D11 - Unused fastener holes |
| D12 - Kick plate too large |
| D13 - Kick plate is not fire rated |
| D14 - Vision light not labeled |
| D15 - Fire Label Unreadable |
| Hinges / Pivots |
| H1 - Missing hinge(s) |
| H2 - Defective hinge |
| H3 - Incorrect hinge |
| H4 - Continuous hinge not labeled |
| H5 - Missing or incorrect screws |
| Door Bolts |
| B1 - Non Rated Surface/Flush Bolts |
| B2 - Missing or defective top bolt |
| B3 - Missing or defective bottom bolt |
| B4 - Missing or defective top strike |
| B5 - Missing or defective bottom strike |
| B6 - Top bolt does not engage strike |
| B7 - Bottom bolt does not engage strike |
| B8 - Automatic flush bolt activation rub plate missing |
| B9 - Missing or incorrect screws |
| Locks |
| L1 - Missing lock |
| L2 - Missing latch bolt |
| L3 - Latch bolt incorrect or not fire rated |
| L4 - Latch bolt binding |
| L5 - Latch bolt not engaging strike |
| L6 - Missing strike |
| L7 - Loose or defectie knob(s) / lever(s) |
| L8 - Missing or incorrect screws |
| L9 - Missing Latch Plate |
| L10 - Knob Lever is Loose or Missing |
| L11 - Deadbolt Not Allowed on Fire Doors |
| L12 - Door not equipped with any latching hardware |
| L13 - Non-Rated Handle/Card Reader |
| Door Closers |
| C1 - Missing or defective door closer |
| C2 - Missing or defective door closer arm |
| C3 - Non-approved hold open device |
| C4 - Missing or defective coordinator |
| C5 - Missing or defective carry bar |
| C6 - Missing or incorrect screws |
| Fire Exit |
| E1 - Missing fire exit device |
| E2 - Non-fire labeled exit device |
| E3 - Incorrect push bar - does not extend half way across door |
| E4 - Missing or defective rim / mortise exit device latch |
| E5 - Missing or defective vertical top rod or latch assembly |
| E6 - Missing or defective vertical bottom rod or latch assembly |
| E7 - Missing or defective rim / mortise exit device strike |
| E8 - Missing or defective vertical rod top strike |
| E9 - Missing or defective vertical rod bottom strike |
| E10 - Missing fire pin/popper |
| E11 - Missing or incorrect screws |
| Miscellaneous |
| M1 - Defective/incorrect or missing fire/smoke gasket |
| M2 - Incorrect clearance between door and hinge jamb |
| M3 - Incorrect Clearance between door and strike/lock jamb |
| M4 - Incorrect Clearance between door and frame head |
| M5 - Incorrect clearance between door and floor |
| M6 - Incorrect clearance between meeting stile of paired doors |
| M7 - Missing or defective astragal |
| M8 - Defective/incorrect or missing sill/threshold |
| M9 - Kick-down/wedge or non-approved auxiliary hold open device |
| M10 - Defective/incorrect or missing protection plate(s) |
| M11 - Defective or incorrect signage |
| M12 - Missing or incorrect screws |
| M13 - Missing hinge filler |
| Operational Test |
| O1 - Door does not swing freely |
| O2 - Door does not close completely |
| O3 - Door does not latch securely |
| O4 - Electronic door release does not allow door |
| to close |
| O5 - Coordinator does not work properly |
| O6 - Edges of Paired Doors Overlap |
| O7 - Door Rubs Against Frame |
| O8 - Bottom of Door Drags Against Floor |
| O9 - Door does not meet over/pull limit |
| O10 - Door exceeds 5 seconds closing speed |
Sheet2
Sheet3
File details come from the government source that posted it.