P09-FINAL Pkg 56 Surgical Instruments SOW.docx

VA Nebraska-Western Iowa Healthcare System Initial Outfitting, Transition & Activation Statement of Work Packet 143 – Surgical Instrument Sets

VA Nebraska-Western Iowa Healthcare System 4101 Woolworth Avenue Omaha, NE 68105 Ambulatory Care Center Project Introduction Veteran Affairs Nebraska-Western Iowa Healthcare System (VANWIHS) has a requirement to purchase Packet 143 – Surgical Instrument Sets with an authorized vendor to supply and deliver the item(s) identified in Table 1 below. This is in support of a brand name or equal. See salient characteristics below. This requirement is in support of the activation of VA Nebraska-Western Iowa Healthcare System Ambulatory Care Center. The new Ambulatory Care Center has the need for Surgical Instrument Sets for surgical use in the new Operating Rooms. Storz is the basis for design.

Table 1 – Package Items Summary

Additional Item Requirements For all Surgical Instrument Sets the vendor shall provide user manuals that describe proper use, care, and cleaning for users of the equipment.

In addition, the vendor shall provide service manuals that include theory of operation, maintenance requirements, repair information, schematics, part lists, and troubleshooting information in electronic format for use by the VA Biomedical Engineering Department.

Date of manufacture shall not be greater than two (2) years before the purchase order date. The equipment shall not be used or refurbished and shall have the latest manufacturer’s software/hardware updates installed. Any batteries provided with the unit shall not be manufactured more than 12 months before the purchase order issue date.

General Conditions Site Address The address of the VA Nebraska-Western Iowa Healthcare System Ambulatory Care Clinic is provided below.

4101 Woolworth Avenue Omaha, NE 68105

Delivery Schedule Items shall be delivered no earlier than the estimated delivery start date and no later than the delivery end date listed in Table 2 below. The site requires initiation of the project management support of this contract immediately in order to coordinate the construction engineering required to support the VA construction management team guiding the site contractor.

Table 2 – Anticipated Building Outfitting Schedule

Schedule and Order Management

Delivery and Receiving

2.4.1 Delivery and receipt of the proposed items is anticipated to be directed to the location identified below. Confirmation of delivery location will be provided post-award. To coordinate delivery, contact Government POC Mark Stockstell at (402) 995-5847, mark.stockstell@va.gov, Colin Beal at (402) 930-7775, colin.beal@va.gov, Dan Thompson at (785) 477-2820, dan.thompson@sme-solutions.com, and Robert Stonerook at (706) 304-7194, Robert.stonerook@sme-solutions.co.

☒ VANWIHS Omaha VA Ambulatory Care Clinic (Direct Delivery to address detailed in paragraph 2.1.1) Special Note: There is no loading dock available at this location. All delivery vehicles must be equipped with a “Tommy Gate” type lift to facilitate unloading to ground level.

☐ IOT&A Contractor-Provided Warehouse Local to the VANWIHS SME Solutions Warehouse: Attn: SME Solutions-VA Project, Gratton Warehouse Co. 11005 E Circle Omaha, NE 68137

If the vendor requires the use of the Government’s activation contractor’s warehouse to meet the requirements of this contract the vendor must provide a certificate of insurance prior to the delivery and offloading of the item(s). This insurance certificate must be completed and presented to the activation contractor prior to delivery.

The vendor shall communicate through the VA and IOT&A POC any required coordination requirements.

Clean Up and Disposal

2.6.1 There are no dumpsters available for vendor use.

2.6.2 The removal of waste and/or excess material shall be conducted through the loading dock area.

Assembly and Installation Required (Yes ☐ No ☒)

2.7.1 The vendor is required to manage and coordinate installation at the VANWIHS Omaha VA Ambulatory Care Clinic with the COR or his representative IOT&A POC.

2.7.2 On-site assembly and installation of items, and performance of services identified in this document shall take place during normal business hours in the new ACC which are defined as: 8:00 AM to 4:30 PM Central Standard Time, Monday through Friday, and excluding Federal Holidays.

2.7.3 The vendor is required to define the need for a staging area to accommodate item assembly and installation, if needed. Post-award, this information will be confirmed with the vendor.

2.7.4 The vendor is required to provide tools, labor and materials to complete assembly and installation of the items detailed in this document.

2.7.5 The vendor shall protect all finished spaces and surfaces as required from delivery and installation damage. The vendor shall use covering and protection to the extent necessary to prevent damage to finished spaces. Any damage occurred during delivery and installation is the responsibility of the vendor. The vendor will be responsible for paying for and repairing any damage or noted deficiencies to finished spaces and surfaces that occur as a result of the vendor’s (or associated sub-contractors) installation.

2.7.6 During the entire duration of assembly and installation, the vendor will have a competent representative on-site as the vendor’s contact, and to serve as the interface between the vendor and VANWIHS. On-site representative can be the installer. All instructions provided from COR to the representative will be binding as if given to the vendor’s main contact. The COR may provide specific instructions, however, only the Contracting Officer may change the terms or conditions of the contract.

Scope of Work

VA Nebraska-Western Iowa Healthcare System U0098

Omaha, NE 68105

☐ Finish BMET Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked ☐ Training Required if Checked ☐ End User Training Required if Checked

JSN Nomenclature: JSN U0098 – Bowel Grasper Salient Characteristics:

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

CLICKLINE BOWEL GRASPER FORCEPS INSERT, FENESTRATED DOUBLE ACTION JAWS, 5MMX43CM Qty 4

CLICKLINE INSULATED OUTER TUBE, 5MMX43CM Qty 4

CLICKLINE PLASTIC HANDLE W/DISENGAGEABLE RATCHET, WITH COMFORT GRIP Qty 4

VA Nebraska-Western Iowa Healthcare System U0099

☐ Finish Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked ☐ BMET Training Required if Checked ☐ End User Training Required if Checked

JSN Nomenclature: JSN U0099 – EndoEar Lenses

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

HOPKINS 0º TELESCOPE, 2.7MM X 11CM, AUTOCLAVABLE Qty 4

HOPKINS 30º TELESCOPE, 2.7MM X 11CM, AUTOCLAVABLE Qty 4

HOPKINS II 30º TELESCOPE, 1.9MM X 10CM, AUTOCLAVABLE Qty 4

STERRAD COMPATIBLE STERILIZATION TRAY F/FOUR SINUS TELESCOPES AND LIGHT CABLE Qty 4

SILICONE TELESCOPE HOLDERS FOR TWO SCOPES TO 4MM, FOR 39301A/B/D TRAYS Qty 12

VA Nebraska-Western Iowa Healthcare System U0100

☐ Finish Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked

JSN Nomenclature: JSN U0100 – Endrowbrow Set

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

30 Deg Wide Angle Telescope, 4mm x 18cm, Autoclavable

Optical Dissector with Large Sharp Fenestrated Spatula F/4mm 30 Deg Telescope

Clickline Scissors Insert/Out Tube, CRVD Blades, DBL, ACTN, Curved Sheath, 5mm x 18cm

Clickline Grasping Forceps Insert/Outer Tube, Heavy, DBL, ACTN Curved 3mm x 18cm

Clickline Plastic Handle w/o Ratchet

Sharp Straight Raspatory Spatula Color Code: Red 12x12mm, Length 15cm

Sharp Curved Raspatory Spatula Color Code: Red 12x12mm, Length 15cm

Sharp Curved Elevator, Distal End 90 Deg up upper Part Sharp, Width: 9mm, WL: 15cm

Sharp Curved Elevator, Color Code Red, Width: 9mm, Length: 15cm

Elevator, Slight, Bended, Hollow Grinding, 8mm x 15cm

VA Nebraska-Western Iowa Healthcare System U0101

☐ Finish Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked

JSN Nomenclature: JSN U0101 – ENT Lens Set

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

0º TELESCOPE, 4MM X 18CM, AUTOCLAVABLE

30º TELESCOPE, 4MM X 18CM

STERRAD COMPATIBLE STERILIZATION TRAY FOR TWO SMALL SCOPES TO 4MM X 18CM

STAINLESS STEEL MEDICINE CUP, 100CC, HEIGHT:30MM, DIAMETER:80MM

HARTMANN NASAL SPECULUM, LENGTH:13CM FOR ADULTS

LUCAE EAR DRESSING FORCEPS, SERRATED, LENGTH: 14CM

GENERIC STERILIZATION/STORAGE TRAY, 19.8" X 9" X 1.8", F/ENT

VA Nebraska-Western Iowa Healthcare System U0103

☐ Finish Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked

JSN Nomenclature: JSN U0103 – ENT Plastic Set

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

MICRO SCISSORS, W/ROUND HDL, SPRING ACTION CURVED, SERRATED, LENGTH:14CM Qty 1

MICRO SCISSORS, W/ROUND HDL, SPRING ACTION STRAIGHT, SERRATED, LENGTH:14CM Qty 1

BARRAQUER MICRO NEEDLE HOLDER, W/ROUND HANDLE, SPRING ACTION, CURVED, SERRATED, 18CM Qty 1

BARRAQUER MICRO NEEDLE HOLDER, CURVED W/ROUND HANDLE, SPRNG ACTION, SERRATED, 14CM Qty 1

MICROLARYNGEAL INSTRUMENT STERILIZATION TRAY, DOUBLE LAYER, 20.5" X 12.5" X 2" Qty 1

VA Nebraska-Western Iowa Healthcare System U0104

☐ Finish Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked

JSN Nomenclature: JSN U0104 – Esophagoscopy and Bronchoscopy Set

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

ROBERTS-JESBERG OVAL ESOPHAGOSCOPE, OD:10X14MM, LENGTH:30CM Qty 2

FIBER OPTIC LIGHT CARRIER FOR 30CM ESOPHAGOSCOPES Qty 2

PRISMATIC LIGHT DEFLECTOR, AUTOCLAVABLE Qty 2

BIOPSY FORCEPS WITH ROUND CUP DOUBLE ACTION JAWS, 2.5MM Qty 4

INSERTABLE SUCTION TUBE FOR 30CM ESOPHAGOSCOPES Qty 2

FIBER OPTIC LIGHT CARRIER FOR 10318B/C/D ADULT BRONCH TUBE, OUTER DIAMETER:2.7MM Qty 2

ADULT BRONCH TUBE W/10318L FIBER OPTIC LIGHT CARRIER, SIZE:7.5, 10.2MM X 43CM Qty 2

FLEXIBLE STAINLESS STEEL RULER LENGTH:20CM Qty 4

ADAPTOR WITH SLIDING WINDOW AND RUBBER TELESCOPE GUIDE FOR ADULT SCOPE Qty 2

RUBBER TELESCOPE GUIDE F/10318 Qty 2

GLASS WINDOW PLUG F/10318 Qty 2

INSTRUMENT GUIDE WITHOUT STEM FOR ADULT BRONCHOSCOPES Qty 2

RESPIRATOR ADAPTOR FOR RIGID BRONCHOSCOPE TUBES Qty 2

FULL LUMEN OPERATING BRONCH TUBE W/VENT HOLES, F/STENTS, OUTSIDE DIAMETER:14MM, LEGTH:43CM Qty 2

OPTICAL FORCEPS F/REMOVAL OF STENTS F/10320AA/BA SCOPES, INCL 8295391 Qty 2

HOPKINS 0º TELESCOPE, 4.5MM X 50CM AUTOCLAVABLE Qty 2

FULL LUMEN OPERATING TRACHEO TUBE W/O VENT HOLES, OD:14MM, LEGTH:33CM Qty 2

FULL LUMEN OPERATING BRONCH TUBE WITH VENT HOLES, OD:12MM, LEGTH:43CM Qty 2

UNIVERSAL ADULT BRONCH TUBE W/0 LIGHT CARRIER, VENT HOLES, SIZE:8.5MM, 11.2MMX43CM Qty 2

ADULT BRONCHOSCOPE STERILIZATION TRAY ID: 25.5" X 9.5" X 5" Qty2

VA Nebraska-Western Iowa Healthcare System U0105

☐ Finish Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked

JSN Nomenclature: JSN U0105 – Marchal Complete Set

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

MARCHAL MINI SIALENDOSCOPY 0° TELESCOPE IRRIG:0.25MM, 1.3MMX12CM, AUTOCLAV Qty 2

MARCHAL MINI SIALENDOSCOPY 0° TELESCOPE IRRIG:0.20MM, 0.89MMX12CM, AUTOCLAV Qty 2

MARCHAL MINI SIALENDOSCOPY 0° TELESCOPE IRRIG:0.25MM, 1.6MMX12CM, AUTOCLAV Qty 2

BOUGIE, OUTER DIAMETER:1MM FOR USE WITH 745725 GUIDE WIRE Qty 2

BOUGIE, OUTER DIAMETER:1.5MM, FOR USE WITH 745725 GUIDE WIRE Qty 2

2MM BOUGIE FOR SIALENDOSCOPY Qty 2

2.5MM BOUGIE FOR SIALENDOSCOPY Qty 2

3MM BOUGIE FOR SIALENDOSCOPY Qty 2

3.5MM BOUGIE FOR SIALENDOSCOPY Qty 2

ANGLED SERRATED DISSECTING FORCEPS LENGTH:15CM Qty 2

ANGLED TISSUE FORCEPS, 1X2 TEETH LENGTH:15CM Qty 2

DELICATE SCISSORS, ANGLED W/BALL END LENGTH:12.5CM Qty 2

MARCHAL SALIVARY DUCT PROBE, SIZE:0000 Qty 2

MARCHAL SALIVARY DUCT PROBE, SIZE:000 Qty 2

MARCHAL SALIVARY DUCT PROBE, SIZE:00 Qty 2

MARCHAL SALIVARY DUCT PROBE, SIZE:0 Qty 2

MARCHAL SALIVARY DUCT PROBE, SIZE:1 Qty 2

MARCHAL SALIVARY DUCT PROBE, SIZE:2 Qty 2

MARCHAL SALIVARY DUCT PROBE, SIZE:3 Qty 2

MARCHAL SALIVARY DUCT PROBE, SIZE:4 Qty 2

MARCHAL SALIVARY DUCT PROBE, SIZE:5 Qty 2

MARCHAL SALIVARY DUCT PROBE, SIZE:6 Qty 2

MARCHAL SALIVARY DUCT PROBE, SIZE:7 Qty 2

MARCHAL SALIVARY DUCT PROBE, SIZE:8 Qty 2

SALIVARY DUCT DILATOR, LENGTH:14CM Qty 2

SIALENDOSCOPY INSTRUMENT SET TRAY DM:21.55"L X 10.18"W X 4.37"H Qty 2

MICRO BURR FOR SALIVARY STONES DIAM:0.38MM Qty 2

SALIVARY DUCT DILATOR, LENGTH:11.5CM SIZE 1, 0.5MM-0.8MM Qty 2

SALIVARY DUCT DILATOR, LENGTH:11.5CM SIZE 2, 0.7MM-1.0MM Qty 2

SALIVARY DUCT DILATOR, LENGTH:11.5CM SIZE 2, 0.9MM-1.2MM Qty 2

SALIVARY DUCT DILATOR, LENGTH:11.5CM SIZE 2, 1.0MM-1.6MM Qty 2

SALIVARY DUCT DILATOR, SIZE 5 1.3MM-1.8MM, LENGTH: 11.5CM Qty 2

VA Nebraska-Western Iowa Healthcare System U0106

☐ Finish Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked

JSN Nomenclature: JSN U0106 – Micro Laryngeal Set

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

Kleinsasser Mini Forceps with Round 1mm Cup Jaws, Straight, WL:23cm Qty 2

Kleinsasser Mini Forceps with Round 1mm Cup Jaws, Curved Up, WL:23cm Qty 2

Kleinsasser Mini Forceps with Round 1mm Cup Jaws Curved Right, WL:23cm Qty 2

Kleinsasser Mini Forceps with Round 1mm Cup Jaws Curved Left, WL:23cm Qty 2

Kleinsasser Mini Alligator Grasping Forceps, Straight, WL:23cm Qty 2

Kleinsasser Mini Grasping Forceps Curved Right, Serrated, WL: 23cm Qty 2

Kleinsasser Mini Grasping Forceps Curved Left, Serrated, WL: 23cm Qty 2

Kleinsasser Mini Grasping Forceps Curved Up, Serrated, WL: 23cm Qty 2

Laryngeal Mini Grasping Forceps, Curved Up Right wTriangular Fenstrated Jaws, WL: 23cm Qty 2

Laryngeal Mini Grasping Forceps, Curved Up Left wTriangular Fenstrated Jaws, WL: 23cm Qty 2

Kleinsasser Laryngeal Scissors, Striaght Horizontal Cutting, Working Length, 23cm Qty 2

Kleinsasser Mini Laryngeal Scissors, Striaght, Working Length, 23cm Qty 2

Kleinsasser Mini Laryngeal Scissors Angled 45 Deg Working Length: 23cm Qty 2

Kleinsasser Mini Laryngeal Scissors Curved Right, Working Length: 23cm Qty 2

Kleinsasser Mini Laryngeal Scissors Curved Left, Working Length: 23cm Qty 2

Benjami-Havas Clip F/Prox Illumination Qty 2

Fiber Optic Light Carrier, F/8574RA/RB, 8587P, 8574JB, Length: 6.5cm Qty 2

Fiber Optic Light Carrier, F/8587A/AA/KK, Lindholm Laryngoscope, Length 8.5mm Length: 6.5cm Qty 2

Insertable Suction Tube, for use with 8574N/P, Length 6.5cm Qty 2

Insertable Suction Tube, for use with F/8587A/AA Lindhold Laryngoscope, Length 6.5cm Qty 2

Fiber optic Light Carrier F/8580B Holinger Laryngoscope Qty 4 Qty 2

Light Cable, 3.5mm x 300cm Qty 2

Hopkins II 0 Deg Telescope, 5mm x 29cm Autoclavable Qty 2

Hopkins II 70 Deg Telescope, 5mm x 24cm Autoclavable Qty 2

Hopkins II 0 Deg Telescope, 5mm x 24cm Autoclavable Qty 2

Rudert Anterior Commissure Triangular Laryngoscope, Medium Size, Length 17cm Qty 2

Hlinger Anterior Commissure, Laryngoscope, Adult Size, Length 17cm Qty 2

Lindholm Operating Laryngoscope, Adult Size, Distal End: 18mm Length: 15cm Qty 2

Dedo Operating Laryngoscope with Extra Light Weight Handle: Length 18cm Qty 2

Kleisasser Suction Tube, With Cut Off Hole: 2mm Length 23cm Qty 2

Kleisasser Suction Tube, With Cut Off Hole: 3mm Length 23cm Qty 2

Suction Tube: 4mm, Length 23cm Qty 2

Suction Tube with Coff Off Hole, Tip with Central Opening: 1mm, Length: 20cm Qty 2

Laryngeal Spoon Forceps with Round 4mm Cup Jaws Straight, Working Length: 23cm Qty 2

Laryngeal Cutting Forceps with Round 4mm Cup Jaws curved Up, Working Length: 23cm Qty 2

Lindholm Vocal Cord/False Cord retractor Self Retaining with Ratchet Handle, Working Length: 24cm Qty 2

Standard Ring Handle f/use w/3mm Instrument for Phonosurgery/Endolaryngeal, Length: 9cm Qty 2

Kleinsasser Laryngeal Hook, Blunt with Probe End Angled 90 Deg, Length 5mm, Working Length 23cm Qty 2

Straight Oval Spoon Curette, Delicate 3mm to 1mm Tapered Shaft, Length 23cm Qty 2

Slightly Curved Blunt Elevator, Delicate 3mm to 1mm tapered Shaft, Length 23cm Qty 2

Handle for F/8595A-8596T Laryngeal Knifes Qty 2

Kleinsasser Laryngeal Knife, Curved, Pointed F/8597 Handle, Working Length 23cm Qty 2

Handle only F/8595A-8596T Laryngeal Knifes Qty 2

Benjamin-Parsons Laryngoscope Holder with Lateral Stabilization Screws, Ring 12cm Qty 2

Goettingen Support Table F/Laryngoscope Holders 8575K/KC, 8574KT/KW, Autoclavable Qty 2

Sterilization/Storage Tray with Two Levels Qty 2

Adult Bronchoscope Sterilization Tray Qty 2

VA Nebraska-Western Iowa Healthcare System U0107

☐ Finish Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked

JSN Nomenclature: JSN U0107 – Myringotomy Set

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

BARON ANGLED CYLINDRICAL SUCTION TUBE W/CUT-OFF HOLE + STYLET, LUER, 1MMX7.5CM Qty 2

BARON ANGLED CYLINDRICAL SUCTION TUBE W/CUT-OFF HOLE+STYLET, LUER, 1.7MMX7.5CM Qty 2

BARON ANGLED CYLINDRICAL SUCTION TUBE W/CUT-OFF HOLE+STYLET, LUER,2.3MM X 7.5CM Qty 2

HARTMANN NASAL SPECULUM, LENGTH:13CM FOR ADULTS Qty 2

BILLEAU EAR LOOP, SIZE 3, LENGTH:16CM Qty 2

WULLSTEIN NEEDLE WITH SLIGHT CURVE AND SHARP POINT, LENGTH:16.5CM Qty 2

HARTMANN EAR FORCEPS WITH VERY FINE SERRATED JAW:1 X 4.5MM, WK LGTH:8CM Qty 2

FISCH-HARTMANN EAR FORCEPS WITH FINE SERRATED JAWS:1.2 X 8MM, WK LGTH:8CM Qty 2

FARRIOR EAR SPECULUM, OVAL, SIZE 2 OUTER DIAM:4.8MM X 5.8MM, LENGTH:4.5CM Qty 2

FARRIOR EAR SPECULUM, OVAL, SIZE 1 OUTER DIAM: 3.8MM X 4.8MM, LENGTH:4.5CM Qty 2

HARTMANN EAR SPECULUM, 3.6CM, OD:3MM Qty 2

HARTMANN EAR SPECULUM, 3.6CM, OD:4MM Qty 2

HARTMANN EAR SPECULUM, 3.6CM, OD:5MM Qty 2

GENERIC STERILIZATION/STORAGE TRAY, 20.5" X 9.7" X 4.7" (WDH) Qty 2

VA Nebraska-Western Iowa Healthcare System U0108

☐ Finish Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked

JSN Nomenclature: JSN U0108 – New Sinus Endo Set

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

HOPKINS II 0º TELESCOPE, 4MM X 18CM AUTOCLAVABLE Qty 2

HOPKINS II 30º TELESCOPE, 4MM X 18CM AUTOCLAVABLE Qty 2

STERRAD COMPATIBLE STERILIZATION TRAY FOR TWO SMALL SCOPES TO 4MM X 18CM Qty 2

LISTER BANDAGE SCISSORS, LENGTH:18CM Qty 4

BLUNT HOOK FOR 660530 HANDLE,

LENGTH:18CM Qty 4

LUCAE EAR DRESSING FORCEPS, SERRATED Qty 4

JANSEN BAYONET SHAPED NASAL DRESSING FORCEPS, LENGTH:16.5CM

DOUBLE-ENDED FREER ELEVATOR LENGTH:20CM

FREER SUCTION ELEVATOR, LENGTH:19CM DISTAL TIP WIDTH: 4.8MM LENGTH:19CM Qty 2

DOUBLE-ENDED COTTLE ELEVATOR, SEMI SHARP AND BLUNT, GRADUATED, LENGTH:20CM Qty 2

V.EICKEN LONG CURVED ANTRUM CANNULA, LUER-LOCK, Ø: 3MM, LENGTH: 12.5CM Qty 2

V.EICKEN SHORT CURVED ANTRUM CANNULA, LUER-LOCK, Ø: 4MM, LENGTH: 12.5CM Qty 2

BLUNT SICKLE KNIFE, DOUBLE CUTTING LENGTH:19CM Qty 2

KUHN-BOLGER FRONTAL SINUS CURETTE,

55º CURVE, SMALL, OBLONG, LENGTH:19CM Qty 2

MAXILLARY SINUS OBLONG ANTRUM CURETTE, SMALL SIZE, LENGTH:19CM Qty 2

KUHN-BOLGER FRONTAL SINUS CURETTE, 90º CURVE, SMALL, OBLONG, LENGTH:19CM Qty 2

DBL-ENDED CURETTE, CURVED OVAL TIPS, SEMI-SHARP/SHARP, WORKING LENGTH:19CM Qty 2

BLUNT HOOK FOR 660530 HANDLE, LENGTH:18CM Qty 2

TROCAR AND CANNULA WITH FENESTRATED BEAK, 5MM X 8.5CM Qty 2

CURVED SCISSORS W/TUNGSTEN CARBIDE INSERTS, SHARP/SHARP, LENGTH:11CM Qty 8

CURVED SCISSORS W/TUNGSTEN CARBIDE INSERTS, BLUNT/BLUNT, LENGTH:11CM Qty 2

MAYO SCISSORS, STRAIGHT, LENGTH: 17CM Qty 2

BACKHAUS TOWEL FORCEPS, LENGTH:9CM Qty 8

HALSTEAD CURVED MOSQUITO ARTERY FORCEPS LENGTH:12.5CM Qty 4

CRILE CURVED HEMOSTATIC ARTERY FORCEPS LENGTH:14CM Qty 12

CRILE-WOOD NEEDLE HOLDER, LENGTH:15CM Qty 8

COTTLE NASAL SPECULUM WITH SET SCREW BLADE LENGTH:35MM, LENGTH:13CM Qty 2

COTTLE NASAL SPECULUM WITH SET SCREW BLADE LENGTH:55MM, LENGTH:13CM Qty 8

RHINOFORCE NASAL SCISSORS, CURVED RIGHT WORKING LENGTH:13CM Qty 2

SLIM SERRATED NASAL SCISSORS, STRAIGHT 10MM BLADE, WORKING LENGTH:11CM Qty 2

SLIM SERRATED NASAL SCISSORS, CURVED LEFT, 10MM BLADE, WORKING LENGTH:11CM Qty 2

BLAKESLEY SILCUT STRAIGHT NASAL CUTTING FORCEPS, THRU CUTTING, SIZE:1, WL:13CM Qty 2

BLAKESLEY SILCUT NASAL CUTTING FORCEPS THRU CUT, 45º UPTURNED, SIZE:1, WL:13CM Qty 2

STAMMBERGER RHINOFORCE ANTRUM PUNCH UPSIDE BACKWARD CUTTING, WL:10CM Qty 2

STAMMBERGER ANTRUM PUNCH, 360º ROTATABLE SHEATH W/LOCKING SCREW, ADULT, WL:10CM Qty 2

STAMMBERGER-LUSK ANTRUM PUNCH, PEDIATRIC SIZE, UPSIDE BACKWARD CUTTING, WL:10CM Qty 2

STAMMBERGER ANTRUM PUNCH, 360º ROTATABLE BACKWARD CUTTING, PEDIATRIC SIZE,WL:10CM Qty 2

OSTRUM PEDIATRIC PUNCH, SHEATH SLIGHTLY CRVD DWN,BCKWARD CUT,3.5X4MM BITE,WL:9CM Qty 2

BLAKESLEY STRAIGHT NASAL FORCEPS SIZE:1, 3.5MMX9MM, WORKING LENGTH:11CM Qty 2

BLAKESLEY NASAL FORCEPS,STRAIGHT, SIZE 3 JAW:3.5MM, WORKING LENGTH:11CM Qty 2

BLAKESLEY STRAIGHT NASAL FORCEPS THRU CUTTING, WIDTH:2.5MM, WL:11CM Qty 2

BLAKESLEY NASAL FORCEPS, THRU-CUTTING TIP 45º UPTURNED, WIDTH:2.5MM, WL:11CM Qty 2

BLAKESLEY NASAL FORCEPS, THRU-CUTTING TIP 45º UPTURNED, WIDTH:4.2MM, WL:11CM Qty 2

BLAKESLEY-WILDE NASAL FORCEPS TIP 45º UPTURNED, SIZE:0, WL:11CM Qty 2

BLAKESLEY-WILDE NASAL FORCEPS TIP 45º UPTURNED, SIZE:1, WL:11CM Qty 2

BLAKESLEY-WILDE NASAL FORCEPS 90º UPTURNED, SIZE:1, WL:11CM Qty 2

BLAKESLEY-WILDE NASAL FORCEPS 90º UPTURNED, SIZE:2, WL:11CM Qty 2

KERRISON MICRO PUNCH, UPBITING 90º NOT THRU CUT, SIZE 2MM, WL:17CM Qty 2

KERRISON PUNCH, DOWNBITING 90º NOT THRU CUT, SIZE 2MM, WL:17CM Qty 2

LENS IRRIGATION SYSTEM SET, INCL: UNIT, POWER CORD, FOOTSWITCH Qty 1 Qty 2

IRRIGATION SHEATH, F/7230AA 0º HOPKINS II TELESCOPES, 5MM X 14CM Qty 2

IRRIGATION SHEATH, F/7230BA 30º HOPKINS II TELESCOPE, 5MM X 14CM Qty 2

IRRIGATION SHEATH, F/7230CA 70º HOPKINS II TELESCOPE, 5MM X 14CM Qty 2

IRRIGATION SHEATH, F/7230FA 45º HOPKINS II TELESCOPE, 5MM X 14CM Qty 2

FRAZIER SUCTION TUBE WITH CUT OFF HOLE AND STYLET, ANGULAR, 2.3MM X 10CM Qty 2

FRAZIER SUCTION TUBE WITH CUT OFF HOLE AND STYLET, ANGULAR, 3MM X 10CM Qty 2

LIGHT CABLE, 3.5MM X 300CM (9.8') Qty 2

SINUS INSTRUMENT STERILIZATION TRAY,

19.75" X 14.5" X 9.5" (WDH) Qty 2

STERILIZATION/STORAGE TRAY WITH TWO LEVELS 20.5" X 9.8" X 5.7" Qty 2

VA Nebraska-Western Iowa Healthcare System U0109

☐ Finish Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked

JSN Nomenclature: JSN U0109 – Plastic Set

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

NO.3 SURGICAL HANDLE FOR 208010-15 AND 208210-15 BLADES, LENGTH:12.5CM Qty 6

ADSON TISSUE FORCEPS, SERRATED 1X2 TEETH, LENGTH:12CM Qty 12

ADSON TISSUE FORCEPS WITH 1X2 TEETH LENGTH:12CM Qty 12

ADSON TISSUE FORCEPS WITH FINE SIDE GRASPING TEETH, LENGTH:12CM Qty 12

JEWELER FORCEPS WITH FINE POINTS, LENGTH:11CM Qty 12

BIPOLAR FORCEPS, INSULATED, BAYONET SHAPE, TIPS 0,3 MM, LENGTH:21CM Qty 12

DELICATE CURVED SCISSORS, LENGTH:10CM Qty 12

STEVENS CURVED SCISSORS, LENGTH:10.5CM Qty 6

STEVENS STRAIGHT SCISSORS, LENGTH:10.5CM Qty 6

METZENBAUM CURVED SCISSORS, LENGTH:14CM Qty 12

MAYO STRAIGHT DISSECTING SCISSORS, LENGTH:15CM Qty 6

MAYO CURVED DISSECTING SCISSORS, LENGTH:15CM Qty 6

LISTER BANDAGE SCISSORS, LENGTH:14CM Qty 6

TOWEL FORCEPS WITH SERRATED INSERTS FOR PAPER COVER SHEETS, LENGTH:9.5CM Qty 24

HALSTEAD CURVED MICRO MODEL MOSQUITO ARTERY FORCEPS, LENGTH:12.5CM Qty 96

CRILE CURVED HEMOSTATIC ARTERY FORCEPS LENGTH:14CM Qty 24

ROCHESTER-PEAN CURVED HEMOSTATIC FORCEPS LENGTH:16CM Qty 24

ALLIS FORCEPS, 5 X 6 TEETH, LENGTH: 16CM Qty 24

NEEDLE HOLDER W/TUNGSTEN CARBIDE INSERTS LENGTH:13CM Qty 24

CRILE-WOOD NEEDLE HOLDER, LENGTH:15CM Qty 6

SENN-MÜLLER RETRACTOR, DOUBLE-ENDED 3 SHARP PRONGS + BLUNT BLADES, LENGTH:16CM Qty 12

TRACHEAL RETRACTOR WITH 4 SHARP PRONGS, LENGTH:17CM Qty 12

JOSEPH SHARP DOUBLE HOOK, WIDTH:2MM, LENGTH:15CM Qty 12

JOSEPH SHARP HOOK WITH ONE SHARP CURVE, LENGTH:15CM Qty 12

SINGLE TENACULUM WITH SMALL CURVE LENGTH:17CM Qty 12

DOUBLE-ENDED FREER ELEVATOR LENGTH:20CM Qty 6

FLEXIBLE STAINLESS STEEL RULER LENGTH:20CM Qty 6

CASTROVIEJO CALIPER, LENGTH:8CM MEASURING RANGE:0-15MM Qty 6

BARRAQUER MICRO NEEDLE HOLDER,W/ROUND HANDLE,SPRING ACTION,STRAIGHT,LGTH:14CM Qty 6

BARON ANGLED CYLINDRICAL SUCTION TUBE W/CUT-OFF HOLE+STYLET, LUER,2.3MM X 7.5CM Qty 6

BARON ANGLED CYLINDRICAL SUCTION TUBE W/CUT-OFF HOLE+STYLET, LUER, 1.7MMX7.5CM Qty 6

COTTLE RETRACTOR, WIDE, LENGTH: 14CM Qty 6

COTTLE RETRACTOR, LENGTH:14CM Qty 12

GENERIC STERILIZATION/STORAGE TRAY, 20.5" X 9.7" X 4.7" (WDH) Qty 12

VA Nebraska-Western Iowa Healthcare System U0110

☐ Finish Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked

JSN Nomenclature: JSN U0110 – Septoplasty Set

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

NO.3 SURGICAL HANDLE FOR 208010-15 AND 208210-15 BLADES, LENGTH:12.5CM Qty 2

SURGICAL HANDLE NO. 7 F/208010-208015, 208210-208215 BLADES Qty 4

ADSON MICRO MODEL DRESSING FORCEPS LENGTH:12CM Qty 4

ADSON TISSUE FORCEPS WITH 1X2 TEETH LENGTH:12CM Qty 4

ADSON TISSUE FORCEPS WITH FINE SIDE GRASPING TEETH, LENGTH:12CM Qty 4

LUCAE EAR DRESSING FORCEPS, SERRATED LENGTH:14CM Qty 2

GRUENWALD BAYONET SHAPED NASAL DRESSING FORCEPS, LENGTH:20CM Qty 2

JEWELER FORCEPS WITH FINE POINTS,

LENGTH:11CM Qty 2

FREER SUCTION ELEVATOR, LENGTH:19CM DISTAL TIP WIDTH: 4.8MM LENGTH: 19CM Qty 2

DELICATE CURVED SCISSORS, LENGTH:10CM Qty 2

CURVED SUTURE SCISSORS, SHARP/SHARP LENGTH:12.5CM Qty 4

SCISSORS, ANGLED, VERY DELICATE,

SHARP/SHARP, LENGTH 11CM Qty 2

STEVENS CURVED SCISSORS, LENGTH: 10.5CM Qty 2

STRAIGHT DELICATE SCISSORS, LENGTH:10CM Qty 2

METZENBAUM CURVED SCISSORS, LENGTH:14CM Qty 2

MAYO STRAIGHT DISSECTING SCISSORS, LENGTH:15CM Qty 2

FOMON DELICATE ANGULAR SCISSORS WITH SERRATED BLADES, LENGTH:6.5CM Qty 2

COTTLE ANGULAR SCISSORS, HEAVY W/SERRATED BLADES, LENGTH:8.5CM Qty 2

FOMON STRONG CURVE SCISSORS, LENGTH:12CM Qty 2

LISTER BANDAGE SCISSORS, LENGTH:14CM Qty 2

BACKHAUS TOWEL FORCEPS, LENGTH:9CM Qty 8

PROVIDENCE HOSPITAL DELICATE ARTERY FORCEPS, CURVED, LENGTH: 14CM Qty 8

CRILE CURVED HEMOSTATIC ARTERY FORCEPS LENGTH:14CM Qty 2

ROCHESTER-PEAN CURVED HEMOSTATIC FORCEPS LENGTH:16CM Qty 8

HEGAR-MAYO NEEDLE HOLDER, HEAVY, WITH TUNGSTEN CARBIDE INSERTS, LENGTH 18CM Qty 4

SENN-MÜLLER RETRACTOR, DOUBLE-ENDED 3 SHARP PRONGS + BLUNT BLADES, LGTH:16CM Qty 4

JOSEPH SHARP HOOK WITH ONE SHARP CURVE, LENGTH:15CM Qty 2

JOSEPH SHARP DOUBLE HOOK WIDTH:7MM, LENGTH:15CM Qty 2

RHINOFORCE NASAL SCISSORS, CURVED RIGHT WORKING LENGTH:13CM Qty 4

COTTLE KNIFE GUIDE AND RETRACTOR LENGTH:19CM Qty 2

RETTINGER NASAL RETRACTOR, W/FLAT HANDLE BLADE:1.5CMX4.5CM, HANDLE LENGTH:10CM Qty 2

AUFRICHT NASAL RETRACTOR WORKING LENGTH:40MM Qty 2

KILLIAN-STRUYCKEN NASAL SPECULUM BLADE LENGTH:40MM, LENGTH:13.5CM Qty 2

HARTMANN NASAL SPECULUM, LENGTH:13CM FOR ADULTS Qty 2

HARTMANN NASAL SPECULUM FOR CHILDREN, LENGTH:13CM Qty 2

SMALL LIGHTWEIGHT MALLET WITH REPLACEABLE HAMMER SURFACE, LENGTH: 18CM Qty 2

TAKAHASHI STRAIGHT ETHMOID FORCEPS WORKING LENGTH: 11CM Qty 2

TAKAHASHI NASAL FORCEPS W/ CUPPED JAWS 30º UP, 9MMX2.5MM, WORKING LENGTH: 11CM Qty 2

BLAKESLEY STRAIGHT NASAL FORCEPS SIZE:1, 3.5MMX9MM, WORKING LENGTH: 11CM Qty 2

JANSEN-MIDDLETON ANGULAR SEPTUM FORCEPS THRU CUTTING, WORKING LENGTH: 10CM Qty 2

JANSEN ANGULAR SEPTUM FORCEPS SPOON SHAPED, WORKING LENGTH: 9CM Qty 2

RUBIN SEPTUM MORCELIZER WITH DOUBLE ACTION JAWS, WORKING LENGTH: 8.5CM Qty 2

DOUBLE-ENDED COTTLE ELEVATOR, SEMI SHARP AND BLUNT, GRADUATED, LENGTH: 20CM Qty 2

COTTLE RETRACTOR, LENGTH: 14CM Qty 2

DOUBLE-ENDED FREER ELEVATOR LENGTH: 20CM Qty 2

JOSEPH ELEVATOR, SLIGHTLY CURVED LENGTH: 17.5CM Qty 2

FREER-JACOBS DOUBLE-ENDED ELEVATOR, 5MM SLIGHT CRVD END/2.5MM 45º ANGLE END, 20CM Qty 2

MCKENTY ELEVATOR, DOUBLE-ENDED 4.5MM AND 5.0MM WIDE, LENGTH: 19CM Qty 2

JOSEPH CURVED BUTTON-END KNIFE LENGTH: 15.5CM Qty 2

COTTLE NASAL KNIFE WITH ROUNDED EDGE LENGTH: 14CM Qty 2

MALTZ NASAL RASP WITH COARSE TEETH BACKWARD CUTTING, LENGTH: 18.5CM Qty 2

COTTLE CROSSBAR OSTEOTOME, W/DEPTH MARKINGS, STRAIGHT, 4MM, LGTH: 18.5CM Qty 2

COTTLE CROSSBAR OSTEOTOME, W/DEPTH MARKINGS, STRAIGHT, 6MM, LGTH: 18.5CM Qty 2

COTTLE CROSSBAR OSTEOTOME, W/DEPTH MARKINGS, STRAIGHT, 4MM, LGTH: 18.5CM Qty 2

MASING CHISEL, STRAIGHT WITH ROUNDED GUARD ON RIGHT SIDE, LENGTH: 18CM Qty 2

CURVED FLAT COTTLE CHISEL WITH GRADUATED DISTAL END, 6MM X 18.5CM Qty 2

MASING CHISEL, SLIGHTLY CURVED WITH ROUNDED GUARD ON LEFT SIDE, LENGTH: 18CM Qty 2

BALLENGER BAYONET SHAPED SWIVEL KNIFE 3MM WIDE, LENGTH: 19.5CM Qty 2

COTTLE BONE CRUSHER W/CLIP, LENGTH: 7.5CM Qty 2

FRAZIER SUCTION TUBE WITH CUT OFF HOLE AND STYLET, ANGULAR, 2.3MM X 10CM Qty 2

FERGUSON SUCTION TUBE W/CUT-OFF HOLE AND STYLET,LUER,MATTE FINISH,Ø:10FR,WL:11CM Qty 2

CASTROVIEJO CALIPER, LENGTH:8CM MEASURING RANGE:0-15MM Qty 2

COTTLE COLUMELLA CLAMP, LENGTH:11CM Qty 2

FREER-JOSEPH DOUBLE-ENDED ELEVATOR DELICATE, LENGTH:20CM Qty 2

MASING CHISEL, STRAIGHT WITH ROUNDED GUARD ON RIGHT SIDE, LENGTH:18CM Qty 2

MASING CHISEL, SLIGHTLY CURVED WITH ROUNDED GUARD ON RIGHT SIDE, LENGTH:18CM Qty 2

MASING CHISEL, SLIGHTLY CURVED WITH ROUNDED GUARD ON LEFT SIDE, LENGTH:18CM Qty 2

RUBIN FLAT OSTEOTOME W/ROUNDED CORNERS STRAIGHT, FINGER STABILIZER, 14MMX16.5CM Qty 2

WHITE PLASTIC CUTTING BLOCK,

AUTOCLAVABLE, 8CM X 4CM X 1CM Qty 2

TEFLON CUTTING BLOCK, AUTOCLAVABLE DIMENSIONS: 20CM X 15CM X 1CM Qty 2

STERILIZATION/STORAGE TRAY WITH TWO LEVELS 20.5" X 9.8" X 5.7" Qty 2

VA Nebraska-Western Iowa Healthcare System U0111

☐ Finish Sample Required if Checked ☐ Manufacturer Certified Installation Required if Checked

JSN Nomenclature: JSN U0111 – Typanomastiod Set

· All instruments must be made of surgical grade stainless steel, unless otherwise specified

· All instruments are requested to be etched for use with Censitrac

NO.3 SURGICAL HANDLE FOR 208010-15 AND 208210-15 BLADES, LENGTH:12.5CM Qty 4

ADSON TISSUE FORCEPS, SERRATED 1X2 TEETH, LENGTH:12CM Qty 12

ADSON SERRATED DRESSING FORCEPS,

LENGTH: 12CM Qty 12

JEWELER FORCEPS WITH FINE POINTS,

LENGTH: 11CM Qty 4

ATRAUMA NON-ATRAUMATIC TISSUE FORCEPS WIDTH OF JAWS 2MM, LENGTH:20CM Qty 8

SENN-MÜLLER RETRACTOR, DOUBLE-ENDED 3 SHARP PRONGS + BLUNT BLADES, LGTH:16CM Qty 2

LUCAE EAR DRESSING FORCEPS, SERRATED LENGTH:14CM Qty 4

FOMON STRONG CURVE SCISSORS,LENGTH:12CM Qty 4

FOMON LOWER LATERAL SCISSORS STRONGLY CURVED, LENGTH: 17CM Qty 4

STEVENS CURVED SCISSORS, LENGTH:10.5CM Qty 4

DELICATE CURVED SCISSORS, LENGTH:10CM Qty 4

STEVENS STRAIGHT SCISSORS, LENGTH:10.5CM Qty 4

METZENBAUM CURVED SCISSORS, LENGTH:14CM Qty 4

MAYO STRAIGHT DISSECTING SCISSORS, LENGTH:15CM Qty 4

LISTER BANDAGE SCISSORS, LENGTH:14CM Qty 4

TOWEL FORCEPS WITH SERRATED INSERTS FOR PAPER COVER SHEETS, LENGTH:9.5CM Qty 8

HALSTEAD CURVED MOSQUITO ARTERY FORCEPS LENGTH:12.5CM Qty 16

KELLY ARTERY FORCEPS, CURVED, LENGTH: 14CM Qty 16

ROCHESTER-PEAN CURVED HEMOSTATIC FORCEPS LENGTH:16CM Qty 16

CRILE-WOOD NEEDLE HOLDER, LENGTH:15CM Qty 8

WHITE PLASTIC CUTTING BLOCK, AUTOCLAVABLE, 8CM X 4CM X 1CM Qty 4

SENN-MÜLLER RETRACTOR, DOUBLE-ENDED 3 SHARP PRONGS + BLUNT BLADES, LGTH:16CM Qty 8

WEITLANER SHARP RETRACTOR WITH 3 X 4 PRONGS, LENGTH:16CM Qty 8

FISCH RETRACTOR WITH 2X2 SHARP PRONGS, LENGTH: 13CM Qty 8

LEMPERT CURVED ELEVATOR, TIP WIDTH:7MM, LENGTH:18CM Qty 4

DOUBLE-ENDED FREER ELEVATOR LENGTH:20CM Qty 4

GELFOAM PRESS, LENGTH:18CM Qty 4

HARTMANN EAR SPECULUM, 3.6CM, OD:3MM Qty 4

HARTMANN EAR SPECULUM, 3.6CM, OD:4MM Qty 4

HARTMANN EAR SPECULUM, 3.6CM, OD:5MM Qty 4

HARTMANN EAR SPECULUM, 3.6CM, OD:6MM Qty 4

HARTMANN EAR SPECULUM, 3.6CM, OD:7MM Qty 4

FARRIOR EAR SPECULUM, ROUND SIZE 1, Ø: 4MM, LENGTH: 4.5CM Qty 4

FARRIOR EAR SPECULUM, ROUND SIZE 2, Ø: 5MM, LENGTH: 4.5CM Qty 4

FARRIOR EAR SPECULUM, ROUND SIZE 3, 6MM X 4.5CM Qty 4

FARRIOR EAR SPECULUM, ROUND SIZE 4, Ø: 7MM, LENGTH: 4.5CM Qty 4

FARRIOR EAR SPECULUM, ROUND SIZE 5, Ø: 8MM, LENGTH: 4.5CM Qty 4

FARRIOR EAR SPECULUM, ROUND SIZE 6, Ø: 9MM, LENGTH: 4.5CM Qty 4

FARRIOR EAR SPECULUM, ROUND SIZE 7, Ø: 10MM, LENGTH: 4.5CM Qty 4

GLASS PREPARATION PLATE, 10CM X 8CM Qty 4

AIACH GRADUATED GRID FOR PREPARATION OF CARTILAGE AND BONE GRAFTS, 50MM X 90MM Qty 4

WULLSTEIN EAR FORCEPS WITH VERY FINE 1MM ROUND CUP JAWS, WK LGTH:12.5CM Qty 4

WULLSTEIN EAR FORCEPS W/VERY FINE 0.9MM OVAL CUP JAWS CURVED RIGHT, WK LGTH:8CM Qty 4

WULLSTEIN EAR FORCEPS W/VERY FINE 0.9MM OVAL CUP JAWS CURVED LEFT, WK LGTH:8CM Qty 4

FISCH-HARTMANN EAR FORCEPS WITH VERY FINE JAWS:1 X 4.5MM, WORKING LENGTH:8CM Qty 8

FISCH-HARTMANN EAR FORCEPS WITH FINE SERRATED JAWS:1.2 X 8MM, WK LGTH:8CM Qty 4

FISCH-HARTMANN EAR FORCEPS, SERRATED DELICATE, 1.2MMX12MM, WL: 8CM Qty 4

MCGEE WIRE CRIMPER, WORKING LENGTH:8CM Qty 4

FISCH-MCGEE WIRE CRIMPER, WORKING LENGTH:8CM Qty 4

FISCH CRUROTOMY SCISSORS, CURVED RIGHT, WORKING LENGTH:7.5CM Qty 4

FISCH CRUROTOMY SCISSORS, CURVED LEFT, WORKING LENGTH:7.5CM Qty 4

FISCH-HARTMANN EAR FORCEPS WITH FINE SERRATED JAWS:1.2 X 8MM, WK LGTH:8CM Qty 4

HARTMANN EAR FORCEPS WITH VERY FINE SERRATED JAW:1 X 4.5MM, WK LGTH:8CM Qty 4

FISCH-BELLUCCI MICRO EAR SCISSORS BLADES 7MM, WORKING LENGTH: 8CM Qty 4

FISCH-BELLUCCI MICRO EAR SCISSORS, EXTRA DELICATE, BLADE:2MM, WL:8CM Qty 4

BELLUCCI EAR SCISSORS, DELICATE BLADES: 8MM, WORKING LENGTH:8CM Qty 4

HOUSE-DIETER MALLEUS NIPPER, UPBITING, WORKING LENGTH:8CM Qty 4

HOUSE-DIETER MALLEUS NIPPER, DOWNBITING, WORKING LENGTH:8CM Qty 4

ROUND KNIFE WITH STRAIGHT TIP, Ø: 2MM, LENGTH: 16CM Qty 4

WULLSTEIN NEEDLE WITH MEDIUM CURVE AND SHARP POINT, LENGTH:16.5CM Qty 8

WULLSTEIN NEEDLE WITH SLIGHT CURVE AND SHARP POINT, LENGTH:16.5CM Qty 8

HOUSE ELEVATOR WITH 15º ANGLED TIP TIP - Ø: 1MM, LENGTH:12MM, WL:16CM Qty 4

FISCH MICRO RASP WITH SINGLE CURVE TO RIGHT, LENGTH:16CM Qty 4

FISCH MICRO RASP WITH SINGLE CURVE TO LEFT, LENGTH:16CM Qty 4

SPRATT MASTOID CURETTE, SIZE 1 LENGTH:17CM Qty 4

SPRATT MASTOID CURETTE, SIZE 2 LENGTH:16.5CM Qty 4

SPRATT MASTOID CURETTE, SIZE 3 LENGTH:17CM Qty 4

SPRATT MASTOID CURRETTE, SIZE 4 LENGTH:17CM Qty 4

WEBER-LOCH EAR CURETTE, SIZE 0 LENGTH:14.5CM, 4MM X 3MM Qty 4

WEBER-LOCH EAR CURETTE, SIZE 1 LENGTH:14.5CM, 5.3MM X 3.5MM Qty 4

WEBER-LOCH EAR CURETTE, SIZE 2 LENGTH:14.5CM, 7.5MM X 4.2MM Qty 4

HOUSE CALIPER STRUT FOR 4MM DISTANCE, LENGTH:16CM Qty 4

HOUSE CALIPER STRUT FOR 4.5MM DISTANCE, LENGTH:16CM Qty 4

HOUSE CALIPER STRUT FOR 5MM DISTANCE, LENGTH:16CM Qty 4

EAR HOOK WITHOUT BALL END SIZE 1, LENGTH:15.5CM Qty 4

FISCH 0.2MM HOOK WITH FOOTPLATE LENGTH:16CM Qty 4

PLESTER 0.6MM HOOK WITH FOOTPLATE, LENGTH:16CM Qty 1

FISCH PERFORATOR, Ø:0.3MM, LENGTH: 16CM Qty 4

FISCH PERFORATOR, Ø: 0.4MM, LENGTH: 16CM Qty 4

FISCH PERFORATOR, Ø: 0.5MM, LENGTH: 16CM Qty 4

FISCH PERFORATOR, 0.6MM X 16CM Qty 4

FISCH CYLINDRICAL SUCTION IRRIGATOR, SUCTN TUBE:4.5MM,IRRIG TUBE:2MM,WL:9.5CM Qty 8

FISCH CONICAL SUCTION IRRIGATOR, SUCTN TUBE:3.2MM,IRRIG TUBE:2MM,WL:9.5CM Qty 8

FISCH CYLINDRICAL SUCTION IRRIGATOR, SUCTN TUBE:2.5MM,IRRIG TUBE:2MM,WL:9.5CM Qty 8

FISCH CYLINDRICAL SUCTION IRRIGATOR SUCTION + IRRIG TUBES:1.9MM, WL:9.5CM Qty 8

FISCH CYLINDRICAL SUCTION IRRIGATOR SUCTION TUBE:1MM,IRRIG TUBE:1MM,WL:9.5CM Qty 8

ANGLED SUCTION CANNULA WITH LUER-LOCK, Ø: 0.7MM, WL: 6CM Qty 8

ANGLED SUCTION CANNULA WITH LUER-LOCK Ø: 0.5MM, WL: 6CM Qty 8

ANGLED SUCTION CANNULA WITH LUER-LOCK, Ø: 1MM, WL: 6CM Qty 8

ANGLED SUCTION CANNULA WITH LUER-LOCK, Ø: 0.7MM, WL: 6CM Qty 8

ANGLED SUCTION CANNULA WITH LUER-LOCK, Ø: 0.8MM, WL: 6CM Qty 8

FISCH ADAPTOR WITH CUT-OFF HOLE, CONE F/204005-204020,204305-204330 CANNULAS Qty 4

JEWELER FORCEPS WITH FINE POINTS, LENGTH:11CM Qty 8

ROUND KNIFE WITH 45º ANGLED TIP, Ø: 2MM, LENGTH: 16CM Qty 4

ROUND KNIFE WITH 45º ANGLED TIP, Ø: 1MM, LENGTH: 16CM Qty 4

ROUND KNIFE WITH 45º ANGLED TIP, Ø: 2.5MM, LENGTH: 16CM Qty 4

PLESTER DOUBLE EDGE SICKLE KNIFE SLIGHTLY CURVED, LENGTH:16CM Qty 4

STERILIZATION/STORAGE TRAY WITH TWO LEVELS 20.5" X 9.8" X 5.7" Qty 4 image2.png