SOW BMB Procure Boom Motors 2.pdf
PDF 957 KB Posted
- Attached to
- Boom Motors
- Solicitation number
- 31020PR260000068
About this file
This is a solicitation specification from the U.S. Coast Guard Base Miami Beach for procuring boom motors. The document details the procurement of two (2) dual voltage motors for boom containment equipment, specifically 7.5 HP, 230/460 volt, 3-phase, TEFC electric motors with specific technical requirements including single circuit, adjustable hydraulic flow control, hydraulic relief valve, hydraulic pressure gauge, 100' 8/4 wires, and two 30A 480VAC 3-phase Hubbell plugs.
The motors are to be shipped to the US Coast Guard Base Miami Beach, Facilities Engineering, Attention: MK Shop-MK1 Arthur Andrade, located at 100 MacArthur Causeway, Miami Beach, FL 33139. The solicitation emphasizes that this is a material-only procurement, with the Coast Guard planning to install the motors in-house. The document includes visual references showing the technical specifications of the existing equipment and a Hubbell plug, providing additional context for potential vendors.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PIC .JPG | JPG image | |
| PIC 2.jpg | JPG image | |
| Synopsis Solicitation 1.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF HOMELAND SECURITY
UNITED STATES COAST GUARD
BASE MIAMI BEACH
SPECIFICATIONS
FOR
Procure Boom Motors
GENERAL: United States Coast Guard Base Miami Beach is accepting proposals for qualified individuals or firms to procure two (2) motors for our boom containment equipment. Prior to submitting a quote, it is mandatory to examine the scope of work, and it’s highly encouraged to visit the facility to take field measurements, evaluations, etc., and become familiar with existing conditions under which the work will be performed. After the award of contract, a pre-conference will be held prior to starting the work at Coast Guard Base Miami Beach.
LOCATION:
United States Coast Guard Base Miami Beach
100 MacArthur Causeway
Miami, FL 33139
I. CONTINUITY OF FACILITIES OPERATIONS:
N/A
II. NOTIFICATION OF START/COMPLETION:
III. COAST GUARD CONTRACTING OFFICER REPRESENTATIVE:
MKC Scott Lane Scott.W.Lane@uscg.mil 305-535-4300
CWO Ryan Romesberg-PWO Ryan.T.Romesberg@uscg.mil 305-535-4547
LT Benjamin Gonski- FE Benjamin.A.Gonski@uscg.mil 305-535-4589
IV. RECYCLING AND DISPOSAL OF REFUSE:
V. SAFETY:
VI. INSPECTION: The Contracting Officer’s Representative has the right to reject defective workmanship or materials or work not performed as per the project specifications. Only the
Contracting Officer or his/her representative may accept work performed by the contractor.
VII. OPERATIONS AND STORAGE:
VIII. CONTRTACTOR IDENTIFICATION:
IX. EXISTING UTILITIES:
X. REGULATIONS WHILE ONBOARD COAST GUARD BASE MIAMI BEACH:
XI. SCOPE OF WORK:
THIS IS FOR MATERIAL ONLY. CG WILL INSTALL IN-HOUSE.
1. Contractor shall procure two (2) dual voltage motors for boom containment: 7.5 HP, 230/460 volt, 3-phase, TEFC electric motor, single circuit, adjustable, hydraulic flow control, hydraulic relief valve, hydraulic pressure gauge, 2, 100’ 8/4 wires, two (2)
30A 480VAC 3-phase Hubbell plugs (HBL430P7W) and ship to:
US Coast Guard
Base Miami Beach
Facilities Engineering
ATTEN: MK Shop-MK1 Arthur Andrade- 305-431-6515
100 MacArthur Causeway
Miami Beach, FL 33139
XI. VISUAL REFERENCES:
United States Coast Guard Base Miami Beach
File details come from the government source that posted it. Updated .