3_Rail_Steel_Jack_Fence_Specs-Drawing.pdf
PDF 159 KB Posted
- Attached to
- IRA/ BIL 2024 TWIN FALLS DISTRICT FENCE REPAIRS
- Solicitation number
- 140L2624R0006
About this file
This document appears to be a set of technical specifications for a 3-rail steel jack fence, which is part of a federal contract opportunity for the IRA/ BIL 2024 TWIN FALLS DISTRICT FENCE REPAIRS.
The specifications detail the required components for the fence, including 12-foot steel rails, 50-inch height prefabricated jacks with internal sleeves, and prefabricated 90-degree corners and ravine adaptors. The steel must be new and made in the USA. The ravine section requires a pivoting connection in the middle. All parts are to be supplied by the contractor, and no painting or galvanization is required. The related federal contract opportunity is solicitation number 140L2624R0006, issued by the Department of the Interior Bureau of Land Management Idaho Region for fence repairs in the Twin Falls District.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 140L2624R0006_Site_Tour_1510-56_0001.doc | DOC document | |
| Sol_140L2624R0006_Amd_0001.pdf | ||
| 2024_Twin_Falls_District_Fences_SOW.docx | DOCX document | |
| SF-24_Bid_Bond.pdf | ||
| 2024_Twin_Falls_District_Fence_Maps.pdf | ||
| Sol_140L2624R0006.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
All parts will be supplied by the contractor.
Finish
The steel does not need to be painted or galvanized.
Ravine
One end of the ravine shall be constructed of 1 7 /8" OD pipe, .090 wall thickness, 12" long. This end will slide on the outside of the internal sleeve extending from the steel jack.
The other end of the ravine shall be an internal sleeve to the pipe rails. This will be constructed out of 1" schedule 40 pipe, 24" long.
The two pieces shall be connected in the middle with a pivot point utilizing a½", grade 5 bolt, 1 ½" long with a nylock nut to allow the two sides to pivot.
Each ravine will have the same specifications.
Steel Rails, Jacks, and Corners
• Rails shall be 1 ¾” OD, 13 gauge minimum, and 12 feet long
• Prefabricated jacks shall be 2 3/8” OD, 10 Gauge minimum, and 50” height jacks
1 ¼” internal sleeves shall be welded at 17”, 30”, and 42” from the bottom of the jacks.
• Prefabricated 90 degree corners shall be supplied
• Prefabricated Ravines shall be supplied
• All Steel must be new and made in the USA
12' Rai15 Ravine Adaptors
C J �
3-Rail Jack Fence Instruction Diagram
3-Rait Jack 3---Rail Jack
12' Rai
I 3-Rail Jack
Comer Set, DI
I(
D1
,1 1'
Hinge
HInge
HInge
HInge
HInge
Hinge
| 3 Rail Steel Jack Fence Specs-Drawing |
| NORTHVIEW FENCE MATERIAL Specs |
| Jack fence dwg Layout1 |
| Jack Fence diagram |
| Jack Fence Specs |
File details come from the government source that posted it. Updated .