3-Attachment B - Scope of Work.docx
DOCX document 20 KB Posted
- Attached to
- InVeris Training Range Targets
- Solicitation number
- KL27-4
- Issued by
- Utah
About this file
This Scope of Work document outlines requirements for the Utah National Guard's procurement of target range targets and parts for the InVeris Training Range System. The solicitation seeks a single contract award to the lowest cost responsive and responsible vendor capable of providing both Sections 1 and 2 parts lists. The contract encompasses the supply and delivery of InVeris target range targets and associated replacement parts necessary for the operation and maintenance of the training system. The vendor must guarantee pricing for all orders and deliveries specified in the solicitation, ensuring cost certainty throughout the contract period.
The procurement is structured to award to a single responsive and responsible bidder meeting all specified requirements. The vendor must demonstrate capability to supply both mandatory sections of the parts list as a condition of award. Pricing must be guaranteed for the duration of the contract to protect the government from cost escalation. The solicitation does not indicate renewal options, specific quantities per item, or identified funding sources, though the contract is being conducted by the Utah National Guard under the State of Utah Division of Purchasing authority.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 2-Att.-A-Agency-Terms-and-Conditions-GS (16).docx | DOCX document | |
| 1-Vendor Prerequisites - IFB Agency.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SCOPE OF WORK
InVeris Targets and Supply Parts for Camp William’s Automated Ranges
Goal
This Scope of Work (SOW) outlines the requirements and deliverables for the supply of InVeris target parts to support the automated ranges at Camp Williams. The goal is to ensure the automated ranges are fully operational and equipped to the highest standards for training and operational readiness.
Background
Camp Williams Range control was fielded InVeris Target systems by the U.S. Army to enhance training capabilities. These advanced target systems are no longer under warranty and are integral to providing realistic and effective training environments for Soldiers. The target systems have been used extensively in various training exercises, ensuring that personnel are prepared for real world scenarios. The continued support and maintenance of these systems are crucial to maintaining the high standards of training provided at Camp Williams.
SECTION 1: Pop-Up Stationary Infantry Targets (SIT)
Procure eighteen (18) pop-up stationary infantry targes(SIT) for the existing InVeris Target System using 120VAC power and Wi-Fi control at Camp Williams.
Requirements
· Procure Target: Deliver an InVeris-compatible, weatherized (IP65) Pop-Up SIT mechanism configured for 120VAC/60Hz and Wi-Fi.
· Supply Cabling: Supply outdoor-rated AC power cables and shielded data cables required for the targets.
· Supply Protective Infrastructure: Provide liquid-tight conduit to house and safeguard all newly supplied cables against moisture and bullet fragments.
Key Specifications
· Target Type: Pop-Up Stationary Infantry Target (SIT)
· Quantity: 18 units
· Power Input: 120VAC, 60Hz
· Control Network: Wi-Fi (Primary) / Shielded Data Cable (Backup)
· System Compatibility: Existing InVeris Range Architecture
SECTION 2: InVeris Training solutions equipment, replacement parts, and accessories to support the automated ranges at Camp Williams
Deliverables & Equipment List
The vendor will supply the following components:
| Item Description |
| Quantity |
| Pcb assembly sit8 connector |
| 20 |
| Cable assembly-230vac power nema l14-20p, ats sit |
| 19 |
| Cable assy, limit switches, type 8 sit |
| 10 |
| Power supply, universal 350w |
| 20 |
| Curtis 1229 motor controller w/nglf sat config |
| 6 |
| Motor controller b+ harness sat, nglf |
| 6 |
| Motor controller b- harness sat, nglf |
| 6 |
| Harness, sit expose/conceal |
| 6 |
| Clamp assy, hit sensor |
| 8 |
| Cordset, m12 female to m12 female, 2.5m lg |
| 8 |
| Jetnet 2005 5xjrj45 |
| 2 |
| Splitter, strt female, m12, 4 pin, 2 x 22 awg super cable |
| 3 |
| Rf modules, xbee, s2c digimesh mesh 2.4, th, rpsma |
| 1 |
| Battery eliminator assy, nglf |
| 11 |
| Harness, motor encoder and limit sensor |
| 10 |
| Mit motor controller curtis 1229 kit |
| 1 |
| Switch assy, limit far #3, 50' track length limit |
| 1 |
| Ca, assy, motor control nglf mit bunker |
| 2 |
| Ethernet cable to rj45 nglf sat |
| 2 |
Delivery:
Address: Utah National Guard Camp Williams Attn: Stan Mecham 17800 So Camp Williams Rd Range Control Bldg 3010 Bluffdale UT 84065
Delivery Date: Parts and Targets MUST be delivered no later than 90 days from when the PO is received.
Freight: All freight, shipping, and handling charges shall be fully included in the vendor's total proposal price Invoicing:
· Invoice Submission: Invoices shall be submitted only after the successful delivery and acceptance of all 18 target units and associated materials.
· Required Information: All invoices must clearly reference the assigned Purchase Order (PO) or Contract Number.
File details come from the government source that posted it. Updated .