3-Attachment B - Appendix A - Approved Materials LIst.pdf

Appendix A

APPROVED MATERIALS LIST

(Capital & Developer Projects)

UPDATED

August 28, 2024

Eastern Municipal Water District

Approved Materials List

TABLE OF CONTENTS

2 of 58 PAGES

Rev: 8/28/2024

Purpose and General Notes 3

I. GENERAL 5

1. BACKFLOW PREVENTION & DETECTOR ASSEMBLIES

2. FIRE HYDRANTS

3. GASKETS & GROMMETS

4. METER BOXES & VAULTS

5. METERS & METER COMPONENTS

6. NUTS & BOLTS

7. PAINT SCHEDULE*

8. SERVICE SADDLES & TAPPING SLEEVES

9. UNDER-GROUND UTILITY MARKING TAPE

10. WATER PIPE & TUBING

II. FITTINGS 23

1. BRASS SERVICE FITTINGS

2. DUCTILE IRON FITTINGS

3. FLANGES

4. FLEX COUPLINGS & FLEXIBLE EXPANSION JOINTS

5. PIPELINE FITTINGS

6. VICTAULIC COUPLINGS & FITTINGS

7. WELDED STEEL FITTINGS

III. VALVES 34

1. AIR VALVES

2. AV & AR ENCLOSURES

3. APPURTENANCES

4. BALL VALVES

5. BUTTERFLY VALVES

6. CHECK VALVES

7. CONTROL VALVES

8. GATE VALVES

9. PLUG VALVES

10. ELECTRIC VALVE ACTUATORS

11. MANUAL VALVE ACTUATORS

IV. SEWER 50

1. MANHOLES & CLEAN-OUTS

2. SEWER PIPE & FITTINGS

V. ELECTRICAL 56

1. WIRING & BASIC ELECTRICAL MATERIALS

3 of 58 PAGES

Purpose and General Notes

The purpose of the Approved Materials List (AML) is to streamline the materials submittal and review process during construction. Contractors are strongly encouraged to use materials from the Approved Materials List as these will be expedited and do not require a full technical submittal for review by the District prior to material approval, except for pipe material submittals and shop drawings. All pipe materials and shop drawings shall be submitted for review and approval. However, Contractors must submit and identify that materials to be used comply with the approved list and/or current Specifications.

Use of “or equal” materials will require a formal and complete submittal subject to review by the Materials Approval Committee (MAC) prior to approval. Any schedule delays as a result of a submittal or use of “or equal” materials will be the sole responsibility of the Contractor.

In the event of a conflict between approved/contract drawings and the Approved Materials List, the approved/contract drawings shall take precedence.

All materials used for potable water systems must meet California Health and Safety Code 116875 (previously AB1953). All materials that come into contact with potable water must be NSF certified or approved (http://www.nsf.org/). All potable water material submittals must include evidence of NSF certifications. Please contact staff if any Model numbers listed are out of date or no longer available.

Vendors and Manufacturers wishing to add materials or products to the Approved Materials List shall follow Vendor Submittal Requirements to make a formal submittal to the MAC. Vendor submittal requirements can be found on our website by going to the Doing Business page and then to the Engineering, Standards, Specifications, and Drawings page. A link to the page is https://www.emwd.org/engineering-standards-specifications-and-drawings and a link to the vendor submittal requirements letter for AML consideration is located at https://www.emwd.org/sites/main/files/file-attachments/approvedmaterialsvendorsub.pdf?1578671296. Please contact staff for more information.

http://www.nsf.org/ https://www.emwd.org/engineering-standards-specifications-and-drawings https://www.emwd.org/sites/main/files/file-attachments/approvedmaterialsvendorsub.pdf?1578671296

4 of 58 PAGES

I. GENERAL

5 of 58 PAGES

1. BACKFLOW PREVENTION & DETECTOR ASSEMBLIES

Description Manufacturers

1. Double Check Assemblies

(¾” thru 10”) (For Non-Toxic Service)

2. Double Check Detector Assemblies

(¾” thru 10”) Std. Drawing. No. B-657 (For Automatic Sprinkler Systems Containing Non-Toxic Substance)

3. R.P. – Reduced Pressure Assemblies (¾” thru 10”) (For High Hazard Service)

4. R.P. – Reduced Pressure Detector

Assemblies (2 ½” thru 10”) (For Automatic Fire Sprinkler Systems Containing Toxic Substances)

AMES

FEBCO

MUELLER

PRATT-WATTS

WILKINS

Note: Backflow prevention materials and detector assemblies shall be one of the above listed manufacturers and shall be listed per latest edition of USC-Foundation for Cross-Connection Control and Hydraulic Research “List of Approved Backflow Prevention Assemblies” A web link to the USC list is located at:

https://fccchr.usc.edu/list.html https://fccchr.usc.edu/list.html

6 of 58 PAGES

Rev: 8/28/2024

2. FIRE HYDRANTS

1. BLOW-OFF HYDRANT JONES

Model: J-344 – 4” x 1-2 ½” (EMWD Std. Drawings B-568 & B-561) Model: J-342 – 2” x 1-2 ½” (EMWD Std. Drawing B-374)

2. BREAK-OFF CHECK VALVE LONG BEACH IRON WORKS

Model 400 (for special locations only as determined by Water Operations)

3. INTERMEDIATE HYDRANT

6” x 2-2 ½” Std. Drawings B-360 & B-354

CLOW

Model: Clow Rich Ranger 945

JONES

Model: J-3720

LONG BEACH IRON

Model: 601-613 Rich East Bay

4. STANDARD HYDRANT

6” x 1-4” x 12 ½” Std. Drawings B-362 & B-356

AVK

Model: 70 (24-70) Series 24

CLOW

Model: El Rancho 2050 Bronze Model: Ranger 850 Model: F850, F860 Cast Iron

JONES

Model: J-3700 Bronze Model: J-4040, J-4060 Cast Iron

LONG BEACH IRON

Model: Series 125 Bronze (New Pattern) Model: 611 East Bay

7 of 58 PAGES

Rev: 8/28/2024

2. FIRE HYDRANTS

5. SUPER HYDRANT

6” x 1-4” x 2-2 ½” Std. Drawings B-516 & B-517

AVK

Model: 90 (24-90) Series 24

CLOW

Model: El Rancho 2060 Bronze Model: 860

JONES

Model: J-3765 Bronze

LONG BEACH IRON

Model: LBIW 615 Model: Series 130 Bronze (New Pattern)

6. WARFHEAD HYDRANT

4” x 1-2 ½” Std. Drawings B-368 & B-357

JONES

Model: J-344 HP

8 of 58 PAGES

Rev: 8/28/2024

3. GASKETS & GROMMETS

Detailed Provisions Section 15081

1. Hand Hole Liner Grommets For reservoir roof openings

DIVE/CORR, INC.

2. Meter Gaskets For water meter installations

JONES

Model 136: ¾” x 1/16” Leather Meter Washers Model 137: 1” x 1/16” Leather Meter Washers

1 ½” & 2” Rubber-Cloth-Inserted Drop-In Meter Gasket

3. Ring and Full-Face Gaskets

Gaskets for steel and cast-iron flanges shall conform to the requirements of EMWD Std. Drawing B-288 and shall be standard full face for pipe 27” diameter and larger.

GARLOCK

Blue-Gard Style 3000, compressed non-asbestos

(CNA)

TRIPAC

Style 5000, non-asbestos https://www.emwd.org/sites/main/files/file-attachments/15081_121709.pdf?1543181276

9 of 58 PAGES

Rev: 8/28/2024

4. METER BOXES & VAULTS

1. Meter Boxes Concrete or Polymer Concrete EMWD Std.

Drawing B-590, B-591, B- 342, B-344

ARMORCAST PRODUCTS

12” x 20” A6000485SA (No.37) ⅝” Polymer Concrete 13” x 24” A6001946PC-12 (No.38) 1” Polymer Concrete

ASSOCIATED CONCRETE PRODUCTS

12” x 20” Cat #WPB111812C21 (#437) Polymer Concrete Cat #WPC1118RLC11 13” x 24” Cat #WPB132412A21 (#438) Polymer Concrete Cat #WPC1324RLC11

BROOKS PRODUCTS

17” x 30” Model No. 66 30” x 48” Model No. 68

EISEL ENTERPRISES (H & C)

17” x 30” Model No. 666B 30” x 48” Model No. 68MB

J & R CONCRETE

12” x 20” Model No. 4 ½ (No. 37) Polymer Concrete 13” x 24” Model No. W5 ¼ P (No.38) Polymer Concrete 17” x 30” Model No. 6B 30” x 48” Model No. 8

2. Meter Box Lid Covers

ARMOR CAST PRODUCTS

Domestic Meter Box Lid Covers (A6000484-H1)

J&R CONCRETE

Domestic Meter Box Lid Covers (PC 412 QRP) P-W4-1/2 Polymer Series (#3012) P-W5-1/4 Polymer Series (#3065)

10 of 58 PAGES

Rev: 8/28/2024

4. METER BOXES & VAULTS

3. Utility Vaults

SIZE

4’ x 4’

4’ x 6’6” 4’6” x 8”6”

4’ x 7’9” 4’6” x 10’6”

6’ x 8’

BROOKS

CONCRETE

PRODUCTS

#W-300 Series #W-500 Series #W-510 Series #W-600 Series #W-610 Series #W-680 Series

EISEL

ENTERPRISES

#EM 4848

#EM 4878

#EM 60108

#EM 4896

#EM 60132

#EM 7296

J&R

PRODUCTS

#4400-1W #4660-2W #4686-1W #4700-1W #5106-1W N/A

4. Valve Boxes

BROOKS

CONCRETE

PRODUCTS

#1-RD

#1-RT

#3-RT

#4-TT

#1-SP

EISEL

ENTERPRISES

#1R-VB-CC

#2VB-VC

#10VB-VC

#4TT VB-VC

#1RVB-CC

J&R

PRODUCTS

#1-R #2-R #3-R #4-T #5-R

5. Vaults

ASSOCIATE CONCRETE

As approved by Engineering

ARMORCAST PRODUCTS

Polymer Concrete Only

BEST CONCRETE PRODUCTS

Models MCT-4 and MCT-5

6. Please note: All meters must be grounded in accordance with manufacturer’s recommendations.

11 of 58 PAGES

Rev: 8/28/2024

5. METERS & METER COMPONENTS

1. Compound Meters

3” thru 6” (cubic-feet register)

SENSUS TECH. INC.

Omni C-2 (AMI/AMR Sensus Flex Net, ERC Register)

2. Electromagnetic Meter 4” thru 10” (domestic) (cubic-feet register)

SENSUS TECH. INC.

Model Series DRFS & CFS (Must be with ECR 2 or 3 registers & Absolute Encoder Technology)

3. Fire Service Meters (Cubic-feet registers) strainer required

4. Mag Meters These are the model #’s with options required.

Additional specification, i.e., liner, electrodes, size, etc., will be required depending on the meter application.

ABB

Electromagnetic Flowmeter WaterMaster FEP/FET300 Flowmeter system, optimized full bore Remote Mounted Transmitter

i) Three-line back-lit graphical display

ii) NEMA 4X / remote wall mounted housing or Panel mount depending on application/location

iii) Power Supply: 120 VAC

iv) Input/Output Signal Type: HART + 20 mA + pulse + contact output

ENDRESS & HAUSER

Promag 53 W Electromagnetic Flowmeter Remote Mounted Transmitter

i) Input/Output Signal Type: Current/HART, frequency, relay, and status input (flexible module)

ii) NEMA 4X/remote wall mounted housing or Panel mount depending on application/location

iii) 120 VAC, with display, touch control operation

SIEMENS

Sensor SITRANS F M MAG 5100 W MAG 6000, Polyamide, 120 VAC

i) Remote Mounted Transmitter

ii) NEMA 4X / remote wall mounted housing or Panel mount depending on application/location Cables Required

FDK001STCAB_ _ _

FDK001SPCAB_ _ _

iii) MODBUS RTU/RS 485 Input/Output Signal Type: 4-20 mA output, pulse/frequency, and relay output

12 of 58 PAGES

Rev: 8/28/2024

5. Multi-Jet Water Meter

AWWA (cubic-feet register) Std. Drawings B-590, B-591, B-342, & B-344

MASTER METER

⅝” x ¾”: BL05-2VA-NAA-2 MJ Meters with Acculinx Registers Lead Free Body w/Plastic Bottom, Cubic Feet W/Sensus 520m TP6 Potted¾” x 1 ½” BLO5-2VA-NNA-2 MJ. Meters with Acculinx Registers Lead Free Body w/Plastic Bottom, Cubic Feet W/Sensus 520m TP6 Potted

1” meter: BLO5-2VA-NNA-2 MJ. w/Acculinx register, Lead free body w/bronze bottom, CCF registration, w/Sensus 520M TP6 Potted

1½” meter: MJ11-2VA-NNA-2 w/Acculinx register. Lead free body w/bronze bottom, CCF registration, w/Sensus 520M TP6 Potted.

2” meter: MJ13-2VA-NNA-2 w/Acculinx register.

Lead free body w/bronze bottom, CCF registration, w/Sensus 520M TP6 Potted

6. Propeller Flow Meters- Pumping Plants & Agriculture (ECR Register AMI/AMR, FlexNet compatible, acre-feet register)

MCCROMETER

MG-900-series MW-900-series MW-500-series

SENSUS TECH, INC.

7. Sports Hydrant Meters PERFORMANCE METER INC.

Model No. FHS20 (Must be with a 2” gate valve)

13 of 58 PAGES

Rev: 8/28/2024

8. Turbine Meters

A. Landscape Strainer required 2” & smaller to have cubic-feet registers 3” & larger to have acre-feet register

B. Domestic Cubic-feet register

PERFORMANCE METER INC.

Model No. FHS20 (Must be with a 2” gate valve)

SENSUS TECH. INC.

Model Omni T2 (Turbine) 1.5” thru 6” (ECR Register AMI/AMR Flex Net) Model Omni R2 (Turbine) 1.5” (ECR Register AMI/AMR Flex Net)

14 of 58 PAGES

Rev: 8/28/2024

6. NUTS & BOLTS

Detailed Provisions Section 15089

1. Nuts & Bolts for Flanged Fittings

Shall be bare steel conforming to SAE-J429 Grade 5 or ASTM A449 medium carbon steel quenched and tempered, meeting the following requirements, and shall have hex heads and lite pattern hex nuts

¼” thru 1” Diameter Proof Strength – 85,000 PSI Yield Strength – 92,000 PSI Tensile Strength – 120,000 PSI

1” thru 1 ½” Diameter Proof Strength – 74,000 PSI Yield Strength – 81,000 PSI Tensile Strength – 105,000 PSI

2. Nuts & Bolts for 1 ½” & 2” Meter Installations

⅝ x 2 ½” Silicon Bronze Hex head. Bolts w/ Bronze Hex Nuts

3. Zinc Caps MARS

RELIANCE

https://www.emwd.org/sites/main/files/file-attachments/15089_101907.pdf?1543181298

15 of 58 PAGES

7. PAINT SCHEDULE*

Item Color* Manufacturer

1. Aerator & Clarifier Spray Headers, Effluent Pumps, & Piping OSHA Safety Red Sherwin-

Williams

2. Air Valve Assemblies Koala Bear

3. Chlorine OSHA Safety Orange

4. Electrical White

5. Fire Hydrants OSHA Safety Yellow

6. Fire Hydrant Tops and Nozzle Caps Red = 500 gpm or less

Orange = 500-999 gpm Green = 1000-1499 gpm Light Blue = 1500 gpm or greater

7. Natural Gas Pipe OSHA Safety Yellow

8. Hydrogen Peroxide (H2O2) Equipment OSHA Safety Yellow

9. High- & Low-Pressure Air OSHA Safety Green

10. Oil Black

11. Potable Water – Pumps, Piping and

Appurtenances Pale Blue / Desert Tan

12. Reclaimed Water – Piping and Appurtenances

Pantone Purple #513 C or #522 C

13. Sludge Sewage - Pumps, Piping, and Appurtenances

Rich Brown

14. Steam Lines Pale Blue

15. Water Storage Tanks Fawn / Buffalo

16. Water Valve Caps Pale Blue *Color shall be selected by Engineering Department staff such that facility blends in with the surroundings (existing terrain) or to ensure permit requirements/conditions of approval are satisfied. Project Specific Color schedule shall take precedence over the above schedule.

16 of 58 PAGES

Rev: 8/28/2024

8. SERVICE SADDLES & TAPPING SLEEVES

*Note: Size 10” & above require double-strap service saddles.

1. *Service Saddles for A.C. Pipe

4” thru 12”

JONES

Model: J-975 Model: J-979

2. Service Saddle for C-900 Pipe ¾” thru 2”

CAMBRIDGE BRASS

Model: 800 Series Hinged Bronze Saddle

3. *Service Saddles for C-900 Pipe 4” thru 12”

FORD

Model: S902 and S912 (Style B2 piece bolted design)

JONES

Model: J-996-R Model: J-996

MCDONALD

Model: 3805

MUELLER

Model: H-13000

ROMAC IND.

Model: B-101 Model: B-202

4. *Service Saddles for Ductile Iron Pipe 4” thru 36”

FORD

Model: F-101 Model: F-202

ROMAC IND.

Model: Romac 101 Model: Romac 202

SMITH-BLAIR

Model: Rockwell 311 Model: Rockwell 313

17 of 58 PAGES

Rev: 8/28/2024

8. SERVICE SADDLES & TAPPING SLEEVES

5. Service Saddles for Steel Pipe

Connections

Weld Saddles 1 - ¼” x 4” thru 48” Weld Saddles 2 - ½” x 4” thru 48”

Refer to Std. Drawing B-271

INTERNATIONAL FABRICATORS

NORTHWEST PIPE COMPANY

SOUTHLAND PIPE CO.

WEST COAST PIPE

6. Tapping Sleeves for A.C., PVC, & D.I.

4” thru 24”

FORD PRODUCTS

Model: Fast-Sleeve” 18-8 All Stainless Steel

JCM IND.

Model: JCM-432 All Stainless Steel Model: JCM-452 All Stainless Steel (14” & above)

POWERSEAL PRODUCTS

Model: 3490 All Stainless Steel

ROBAR

Model: 6606

ROMAC IND.

Model: SST 18-8 All Stainless Steel

SMITH BLAIR. INC.

Model: 663 (4” thru 24”) Model: 665 (6” thru 12”)

7. Weld Saddles Std. Drawing B-271

Epoxy, Coated Fabricated Steel Outlet Scotch 3M – #206N Schedule 40 Pipe on 4” thru 10” ¼” Wall Pipe on 12” & above

INTERNATIONAL FABRICATORS

NORTHWEST PIPE COMPANY

SOUTHLAND PIPE CO.

18 of 58 PAGES

Rev: 8/28/2024

9. UNDER-GROUND UTILITY MARKING TAPE

(Non-Detectable Only)

Description Color Code: A.P.W.A. Manufacturers

1. Specifications: ASTM-

Underground utility marking tape shall be in accordance with the A.P.W.A. National Color Code and shall be imprinted with an appropriate legend to define the type of utility line it protects.

Tape shall be of a pigmented polyolefin film with a printed message on one side. The ink used to print the materials shall be permanent and cannot be removed by normal handling or upon underground burial.

The polyethylene shall be chemically inert and shall not degrade when exposed to alkalis, acids, and other destructive substances commonly found in soils.

Tape shall consist of a 4.0 mil overall thickness or as approved by Engineering.

SAFETY BROWN – Force Effluent Mains

SAFETY BLUE – Potable Water Systems

SAFETY GREEN – Sanitary and Storm Sewer Systems

SAFETY ORANGE – Telephone, Cable & Telegraph Systems

SAFETY PURPLE – Reclaimed Water Lines

SAFETY RED – Electric Power & Systems

SAFETY YELLOW – Gas & Oil

REEF INDUSTRIES

Terra Tape

SHIELDTEC

Thor

19 of 58 PAGES

Rev: 8/28/2024

10. WATER PIPE & TUBING

WATER PIPE

1. Ductile Iron Pipe

Detailed Provisions Section 15057

AWWA C-600, C-151, C-150, & C-104

PACIFIC STATES

U.S. PIPE

2. High Density Polyethylene Pipe CHEVRON PHILLIPS CHEMICAL COMPANY

J-M MANUFACTURING COMPANY, INC.

3. High Density Polyethylene Pipe CHEVRON PHILLIPS CHEMICAL COMPANY

J-M MANUFACTURING COMPANY, INC.

4. Polyvinyl Chloride (PVC) Detailed Provisions Section 15064

C900 4” thru 24”

CARLON PIPE

DIAMOND PLASTICS CORP.4” thru 24”

JM EAGLE

WESTLAKE PIPE & FITTINGS (formerly

NORTH AMERICAN PIPE CORP., NAPCO,

and CERTAIN-TEED CORP)

PW PIPE CO.

VINYL-TECH – “White Knight”

5. Molecularly Oriented Polyvinyl Chloride (PVCO), C909, 4” thru 12”

Note: May be used for water, sewer, or recycled water applications.

JM EAGLE

Model: Ultra Blue PVCO

WESTLAKE PIPE & FITTINGS

Aquamax IB PVCO

6. Steel Pipe (Bare) 3” thru 10” – standard wall thickness 12” thru 54”, ¼” wall thickness minimum Steel Certification Required http://www.emwd.org/home/showdocument?id=793 http://www.emwd.org/home/showdocument?id=789

20 of 58 PAGES

Rev: 8/28/2024

10. WATER PIPE & TUBING

WATER PIPE

Description Manufacturers

7. Steel Pipe (CML&C) Detailed Provisions Section 15061

AWWA C-200, C-205 & C-303 (all classes) 4” thru 54”

IMPERIAL PIPE

MID AMERICA PIPE

NORTHWEST PIPE COMPANY

ROSCOE MOSS

THOMPSON PIPE GROUP

https://www.emwd.org/sites/main/files/file-attachments/15061_rev1.pdf?1543181189

21 of 58 PAGES

Rev: 8/28/2024

10. WATER PIPE & TUBING

TUBING

1. Copper Tubing – Type K Soft

Water Service Installations

ASTM B-88

¾ thru 2”

2. Copper Tubing – Type L Rigid Backflow Installations

ASTM B-88

¾ thru 3”

3. Liner Insert (Stainless Steel)

FORD CO.

#72

JONES CO.

J-2806

MCDONALD

#6136

MUELLER CO.

#505142

22 of 58 PAGES

II. FITTINGS

23 of 58 PAGES

Rev: 8/28/2024

1. BRASS SERVICE FITTINGS

Std. Drawings B-590 – B-591A

1” thru 2” B-342 – B344B

Item Connection Type

Manufacturers

CAMBRIDGE FORD MCDONALD MUELLER/JONES

1. ¼-BEND

(90 Ell)

FLARE 105NL-(Series)

C04-(Series) C06-(Series) L04-(Series) L06-(Series)

74761 74776

H-15530N/E-1550 H-15460N/E-1536 H-15068N/E-1548 H-15525N/E-1552

PACK JOINTED L04-(Series) L06-(Series) C04-(Series) C06-(Series) L84-(Series) L86-(Series) C86-(Series)

74761-22 74776-22

P-15526N/E-2611 P-15531N/E-2619 P-15533N/E-2621

COMPRESSION

CONNECTION

74761Q 74776Q

H-15526N/E-2611SG

2. Angle Meter Stop

FLARE 210NL-(Series) 105NL-(Series)

FV23-(Series)

74602

B-24277N/E-1973W H-14255N/E-1525

PACK JOINTED FV43-(Series) KV43-(Series)

74602-22 P-24276N/E-1975W P-14258N/E-4201 E-14259N/E-4202

COMPRESSION

CONNECTION

KV43-(QSeries) 74602Q

H-14258N/ E-4201SG

B-24276N/E-1975WSG

H-14265N/E-1527

3. Corp Stop Ballcorp

FLARE 301NL-(Series)

FB600-(Series) FB700-(Series)

74701B B-25000N/E-1929 B-25025N/E-1930

PACK JOINTED FB1000-(Series) FB1100-(Series)

74701B-22 P-25028N/E-1935 P-25008N/E-1937

COMPRESSION

CONNECTION

FB1000-(Q Series) FB1100-(Q Series)

74701BQ

H-15013N/E-1959 H-15023N/E-1957

B-25008N/E-1937SG

24 of 58 PAGES

Rev: 8/28/2024

1. BRASS SERVICE FITTINGS

Std. Drawings B-590 – B-591A

1” thru 2” B-342 – B344B

Item Connection Type

Manufacturers

CAMBRIDGE FORD MCDONALD MUELLER/JONES

4. Corp Stop Keycorp

FLARE 311NL-(Series)

F600-(Series)

74701

H-15000N/ E-1500 H-15025N/E-1505

PACK JOINTED F1000-(Series) F1100-(Series)

74701-22 P-15008N/ E-3401

COMPRESSION

CONNECTION

F1000-(Q Series) F1100-(Q Series)

74701B

H-15008N/ E-3401SG

5. Liner Inserts

86-(Series)

Insert 50-(Series) Insert 70-(Series)

528705/528705J 528706/528706J 528707/528707J

6. Meter Bushings 3/4”x 1”

440NL-(Series) BBIM-(Series) 710J34 H-10889N E-128H

7. Meter Flange

421NL-(Series) 424NL-(Series)

CF31-(Series) CF38-(Series)

7610F 7610-22 7610M

E-129 E-127

8. Meter Tail Piece (Meter Couplings)

417NL-(Series) C31-(Series) C38-(Series)

74620 74622 74624

H-10891N/E-134 H-10896N/E-130

9. Service Curb Stops (gas-cock)

252NL-(Series) Z21-(Series) Z22-(Series) Z41-(Series) Z44-(Series) Z77-(Series)

10621

H-10200N/E-182

25 of 58 PAGES

Rev: 8/28/2024

1. BRASS SERVICE FITTINGS

Std. Drawings B-590 – B-591A

1” thru 2” B-342 – B344B

Item Connection Type

Manufacturers

CAMBRIDGE FORD MCDONALD MUELLER/JONES

10. Splicing Couplings

FLARE 117NL-(Series) 119NL-(Series)

C22-(Series) 74758 74756

H-15425N/E-1531 H-15400N/E-1528

PACK JOINTED C44-(Series) C66-(Series) C84-(Series)

74758-22 74758-33

P-15403N/E-2609 E-15404N/E-2610 P-15451N/E-2607

COMPRESSION

CONNECTION

C44-(Q Series) C66-(Q Series) C84-(Q Series)

74758Q 74758Q

H-15403N/E-2609SG

H-15404N/E-2610SG

H-15451N/E-2607SG

26 of 58 PAGES

2. DUCTILE IRON FITTINGS

Detailed Provisions Section 15057

Fittings shall be Ductile Iron and shall conform to ANSI/AWWA

C153 / A21.53, ANSI/AWWA

C111/A21.11, and ANSI/AWWA C110/A21.10.

Fittings shall be Mechanical Joints or Push-on Joints.

Fittings shall be Tar (seal) coated and Cement Mortar lined per

ANSI A21.4 (AWWA C104).

ASTM / A536 Restraint Joint

ONE BOLT, INC.

PACIFIC STATES

PIPELINE COMPONENTS, INC.

M.J. Compact Fittings – All Sizes M.J. Full Body Fittings – All Sizes Push-on Fittings – 4” thru 8”

SERAMPORE INDUSTRIES PRIVATE LTD, INC.

SIP Industries C110 MJ Fittings SIP Industries C153 MJ Fittings SIP Industries C110 Flanged Fittings

SIGMA CORPORATION

Sigma/Nappco

STAR PIPE PRODUCTS

TYLER UNION

https://www.emwd.org/sites/main/files/file-attachments/15057_rev1.pdf?1543181119

27 of 58 PAGES

3. FLANGES

1. Companion Flange

Cast Iron, Threaded

JONES

Model: J-129. Size: 1 ½” & 2”

2. Ring Flange Std. Drawing B-288

1 ½” thru 54”

RETECH INC. & CONTINENTAL MANUFACTURING

No. A-36 Steel Ring Flange No. A-283 “C” Steel Flange No. A-283 “D” Steel Flange

3. Meter Flange Bronze Std. Drawing B-342 thru B-344-B

MCDONALD

#610-F. Size: 1 ½” & 2”

3” Class “D” Plate Flange with four ⅝” I.D. Bore For use on 3” Compound Meter Connection.

4. Meter Flange Steel Std. Drawing B-633

28 of 58 PAGES

4. FLEX COUPLINGS & FLEXIBLE EXPANSION JOINTS

1. Flex Couplings (Compression)

Steel & Cast Iron ½” thru 36”

FORD METER PRODUCTS

Model: F-Ringwall Series

ROMAC

Model: Romac 501 Series Model: Macro HP 4” thru 12” Alpha Series

SMITH-BLAIR

Model: SB-411, SB-441

2. Flex Expansion Joints 3” thru 36” min. offset: 11” for < 12” diameter min. offset: 18” for > 12” diameter

EBAA IRON

Flex-tend Flex-tend Force Balanced (for reservoir applications)

29 of 58 PAGES

Rev: 8/28/2024

5. PIPELINE FITTINGS

1. Joint Restraints

EBAA IRON

2000 PV Series: 4” thru 24” (C-900) Model 1100 Series: 3” thru 48” 2100 Series: 4” thru 12” (C-900) 2800 Series: 14” thru 36” (C-900)

FORD

Uni-flange Series Model 200, 900,1300 & 1400 Uni-flange Series Model 1500 restraint joint for PVC pipe 4” thru 12” Uni-flange Series Model 1390 restraint joint for PVC pipe

NAPPCO/SIGMA CORP.

Model PV-Lok PVM: 2” thru 12” Model PV-Lok PVP: 2” thru 12” Model ONE LOK: 4” thru 36”

ROMAC INDUSTRIES

Grip Ring 4” thru 12”

Alpha Restrained Joints 4” thru 12” Flanged Coupling Adaptor, Coupling, and End Cap

SIP INDUSTRIES

EZ-Grip

SMITH BLAIR

Model C111/C120

STAR

Allgrip 3600: 4” thru 12” for C900 and ductile iron pipe Series 1000: 4” thru 12” for C900 Series 1100: 4” thru 48” for C900 PVC Grip 3500: 4” thru 16” for C- Stargrip 3000: 4” thru 36” for D.I.P.

PVC Stargrip 4000: 4” thru 36” for C900

TYLER/UNION

TufGrip Dual Wedge, Series 1500

Field Lok Gaskets: 4” thru 12”

30 of 58 PAGES

Rev: 8/28/2024

5. PIPELINE FITTINGS

2. Pipeline Adapters

IMPERIAL PIPE

WESTLAKE PIPE & FITTINGS (formerly NORTH AMERICAN PIPE CORP., NAPCO, and CERTAIN-TEED CORP)

ROBAR

Models 1506, 1508, 1908

ROMAC IND.

Model 500 Series Alpha Series

SIGMA CORP.

Model Sigma/NAPPCO

SMITH-BLAIR

Model SB-900 Series

TYLER UNION

31 of 58 PAGES

Rev: 8/28/2024

6. VICTAULIC COUPLINGS & FITTINGS

Detailed Provisions Section 15077

1. Grooved Victaulic Couplings and Fittings

GUSTIN-BACON

Model: 100-IPS Model: 500-Ductile Iron

VICTAULIC CO.

Style 31 – Coupling - 3” to 36” Style 307 – Transition Coupling – 3” to 12” Style 341 – Flange Adaptor – 3” to 24” Style 107N – QuickVic Rigid Coupling – 2” to 12” Style 177N – QuickVic Flexible Coupling – 2” to 12” Style W07 – AGS Rigid Coupling – 14” to 50” Style W77 – AGS Flexible Coupling – 14” to 72” w/ Grade “E” Gasket Style W741 – AGS Vic-Flange Adapter https://www.emwd.org/sites/main/files/file-attachments/15077_rev1.pdf?1543181254

32 of 58 PAGES

Rev: 8/28/2024

7. WELDED STEEL FITTINGS

Detailed Provisions Section 15059

1. Steel Fittings Domestic Steel Various Sizes

Shall be fabricated as shown on the contract drawings, and/or as specified in the Special Conditions.

Flanges shall conform to the requirements of EMWD Std. Drawing B-288 made a part hereof by reference.

Steel Certification Required https://www.emwd.org/sites/main/files/file-attachments/15059_rev1.pdf?1543181166

33 of 58 PAGES

III. VALVES

34 of 58 PAGES

Rev: 8/28/2024

1. AIR VALVES

Detailed Provisions Section 15136

1. Air Release Valve ¾”

APCO VALVE CO.

Model: APCO #65

2. Air Release and Vacuum Valve Std.

Drawings B-598 & B-367 1” & 2”

Model: 143C and 145C

A.R.I Model: D-040

CLA-VAL CO.

Model:361-CAV564B and 362-CAV332

CRISPIN VALVE CO.

Model: UL-10 and UL-20

EMPIRE VALVE CO.

Model: 940

VALVMATIC VALVE CO.

Model: 201C and 202C

3. Air Release and Vacuum Valve Std.

Drawing B-578 4” & 6”

Model:149-C and 150-C

CLA-VAL CO.

Model:364-CAV332 and 366-CAV732-3

CRISPIN VALVE CO.

Model: UL-41 (4”) and AL-61/PL-10 (6”) https://www.emwd.org/sites/main/files/file-attachments/15136_rev1.pdf?1543182070

35 of 58 PAGES

Rev: 8/28/2024

2. AV & AR ENCLOSURES

4. Advanced Series air and vacuum valve enclosures. (Polymer Enclosure)

PIPELINE PRODUCTS

1” AV & AR MIN. ENCLOSURE SIZE 14” X 24” (VCAS

1424 GM POLY AIR VALVE ENCLOSURE)

2” AV & AR MIN. ENCLOSURE SIZE 18” X 30” (VCAS

1830 GM POLY AIR VALVE ENCLOSURE)

5. (Steel Enclosure) PIPELINE PRODUCTS

1” AV & AR MIN. ENCLOSURE SIZE 16” X 24”

(V-VCDD 1624E STEEL AIR VALVE ENCLOSURE

3” & LARGER AV & AR MIN. ENCLOSURE SIZE 24” X

36” (V-VCDD 2436 STEEL AIR VALVE ENCLOSURE)

6. Air Valve Suction Screens Std. Drawings. B-598 & B-367

FLOW EZY FILTERS, INC.

M-6-8 (¾”) – Stainless Steel M-8-8 (1”) – Stainless Steel M-16-8 (2”) – Stainless Steel

7. Pump Air Valve

ARMSTRONG MACHINE WORKS – Model: 21

36 of 58 PAGES

3. APPURTENANCES

1. Hose Bibbs (Brass)

300-lbs working water pressure For Treatment Plants

CALIFORNIA BRASS MFG. CO.

Calco Fig. 101

FAIRBANKS VALVE CO.

Model: 150-S

2. Valve Cap & Riser

Std. Drawing B-668

6” C.I. Valve Cap Marked “Water” for Potable Water Marked “Recycled” for Recycled Water

Galv. Split Valve Can Top Section – 6” O.D. x 22Ga. Slip Can length 12”, 18” or 24”, as required.

Valve Can – 6 ⅝” O.D. x 10 Ga.

Double-Dip Pipe

37 of 58 PAGES

Rev: 8/28/2024

4. BALL VALVES

Detailed Provisions Section 15104

1. Ball Valves

AWWA C507

LUNKENHEIMER COMPANY

MARPAC, INC.

VALVE TECHNOLOGY CO.

Models: D7410 – 7420 Series Models: D7421 – 7432 Series

2. Meter Ball Valves (with Handles) A.Y. MCDONALD Model: 6101 MWH (¾” and 1”)

JAMES JONES CO.

Jones Model: J1908W (¾” and 1”)

THE FORD METER BOX CO., INC.

Model: B13-332 W (¾”) Model: B13-444 (1”) http://www.emwd.org/home/showdocument?id=782

38 of 58 PAGES

Rev: 8/28/2024

5. BUTTERFLY VALVES

1. Class 150 Detailed Provisions Section 15103

AWWA C-504

Coatings: valves shall have all ferrous parts epoxy coated per AWWA-C550 (fusion bonded).

AMERICAN FLOW CONTROL

Model: A.D. 150 Size: 4”-48”

CLOW CO.

Model: Clow BFV. Class 150, Size: 4” thru 72”

CRISPIN (Previously CMB Industries) K-FLO Model: 500 Series, 3” thru 20” K-FLO Model: 47 Series, 24” thru 48”

DEZURIK CO.

Model: Dezurik BFV. Class 150, Size: 4” thru 20”

KENNEDY

Model: Kennedy BFV. Class 150 Size: 4” thru 72”

KUBOTA

Model: Kubota BFV. Class 150, Size: 24” thru 48”

M & H CO.

Model: 4500, Class 150, Size 4” thru 24” Model: 1450, Class 150B, Size 30” thru 48”

MUELLER CO.

Model: Mueller Lineseal III, Size: 4” thru 24” Model: Mueller Lineseal III, Size: 30” thru 48” (with Ductile Iron Disc.)

PRATT VALVE CO.-

Model: Pratt Ground Hog BFV. Class 150 with no Power Operation Allowed, Size: 4” thru 12” Model: Pratt Ground Hog with Power operation allowed with knowledge of turns. Size: 14” thru 48” Model: Pratt Triton XR-70 with Handwheel. Size: 24” thru 48” https://www.emwd.org/sites/main/files/file-attachments/15103_rev1.pdf?1543181371

39 of 58 PAGES

Rev: 8/28/2024

5. BUTTERFLY VALVES

2. Class 250

Coatings: valves shall have all ferrous parts epoxy coated per AWWA-C550 (fusion bonded).

CRISPIN (Previously CMB Industries) Model: K-FLO 500 Series

DEZURIK

Model: BAW Series

PRATT

Model: H.P. 250

40 of 58 PAGES

6. CHECK VALVES

1. Bronze Threaded

Swing Check Valve ¾” thru 2”

HAMMOND VALVE CO.

Model: 946 Bronze

MILWAUKEE VALVE CO.

Model: 510 & 511

STOCKHAM VALVE CO.

Model: B-320

2. Flanged Swing Check Valves shall be single disc type with spring and lever when so specified on the Bidding Sheet.

Detailed Provisions Section 15111

CLOW CO.

KENNEDY VALVE CO.

M & H CO.

MUELLER CO./PRATT

STOCKHAM CO.

3. Wafer Check Valve w/Viton O- Ring Seal 4 thru 12”

PENTAIR

Keystone Prince Figure No. 810 & Figure No. 813-S & L Short Wafer Body Keystone Prince Figure No. F810-004 Keystone Prince Figure No. F813-519-S&L https://www.emwd.org/sites/main/files/file-attachments/15111_rev1.pdf?1543181999

41 of 58 PAGES

Rev: 8/28/2024

7. CONTROL VALVES

Detailed Provisions Section 15120

1. Control Valves

All control valves shall be flanged diaphragm type globe valves, with Cast- Iron Body, as manufactured by CLA-VAL Co., Singer Co. or approved equal. Epoxy shall be Thermo-Setting, Conforming to AWWA C-550. Delrin Stem. All Control Valves other than pressure reducing valves shall have Bronze Trim. Pressure Reducing Valves shall have Stainless Steel Trim.

CLA-VAL CO.

SINGER CO.

2. Pressure Regulators AMES CO.

Model: Ames 900 Series Model: Ames 800 Series

CLA-VAL CO.

Model: Clayton 90 Series Model: Clayton 610 Series

PRATT/WATT CO.

Model: Globe Fig. 115 – Class 125 Fig. 1115 – Class 250

WATT CO.

Model: Watts 25 AUB, Bronze

WILKINS

Model: Wilkins, 600 Cold Water & Air http://www.emwd.org/home/showdocument?id=776

42 of 58 PAGES

Rev: 8/28/2024

7. CONTROL VALVES

Detailed Provisions Section 15120

3. Pressure Relief Valves AMES CO.

Model: Ames 800 Series

CLA-VAL

Model: Series 50 & 51

PRATT/WATTS CO.

Model: No. Globe – 116 Class 125, Angle-116 Class 250

4. Pump Control Valves AMES Model Ames 800 Series

CLA-VAL

Model: 61-G

PRATT/WATTS

Model: Globe 513, Class 125 Model: Angle 1513, Class 250 https://www.emwd.org/sites/main/files/file-attachments/15120_rev1.pdf?1543182030

43 of 58 PAGES

Rev: 8/28/2024

8. GATE VALVES

Std. Drawing Nos. B-590 thru B-344-B

1. Bronze Threaded

NRS-½”

HAMMOND VALVE CO.

Model: 606-125 PSI

MILWAUKEE VALVE CO.

Model: 105-200 PSI

Model: B-103-200 PSI

2. Bronze Threaded NRS ¾” thru 1”

*To be used in customer side of meter installation only. Std. Drawing B-591

AMERICAN VALVE CO.

Model: Milano, M-300

FAIRBANKS VALVE

Model: 125-S 250

*F&F VALVE

Model: 710-Brass

*KITZ VALVE

Code No. 27 Fig. AKH

MILWAUKEE VALVE

Model: 1105M & #105

NIBCO VALVE

Model: T-113-Domestic

*PIONEER ENTERPRISES

Model: GTI-0102 & 0103

RED AND WHITE VALVE

Model: 206

STOCKHAM VALVE

Model: B-103

WOLVERINE VALVE

Model: 50293

44 of 58 PAGES

Rev: 8/28/2024

8. GATE VALVES

3. Bronze Threaded

NRS 1 ½” thru 2”

AMERICAN VALVE

Model: 3-F Bronze

MILWAUKEE VALVE

Model: 1105M & 105

NIBCO VALVE

Model: T-113, Domestic

STOCKHAM VALVE

Model: B-103

4. Cast Iron With 2” Operating Nuts for 2” Blow-offs

CLOW VALVE CO.

IOWA VALVE

Model: List 14

MUELLER VALVE

Model: A-2380-8 & A-2380-6

RENSSELSER VALVE

Model: Ludlow, list 13A

5. Flange x Hub End Resilient Gate Valves

AWWA C-509

Ring-Tite, Fluid-Tite, or Approved Equal

45 of 58 PAGES

Rev: 8/28/2024

8. GATE VALVES

6. Resilient Seat Gate Valves Flanged

AWWA C-509, C-515 and AWWA C-550 EMWD Detailed Provisions Section 15102 4” thru 36”

ACIPCO

Model: 82-200W-77785-7

AMERICAN AVK CO.

Model: 25 AVK

AMERICAN FLOW CONTROL CO.

Model: AFC-500 for 4” thru 12” Or Series 2500 for 4” thru 36”

CLOW CO.

Model: Clow RW, Class 150

KENNEDY

Model: Kennedy RS-Class 150

M & H Model: M & H #A-4067

MUELLER CO.

Model: A-2361 & A-2362

STOCKHAM CO.

Model: Stockham #G700-0

TYLER

Model: DRS 250

U.S. PIPE

Model: Metroseal, RS Class 150

WATEROUS CO.

Model: Waterous #AFC-500 https://www.emwd.org/sites/main/files/file-attachments/15102_rev1.pdf?1543181346

46 of 58 PAGES

9. PLUG VALVES

1. Eccentric Fullport Non-Lubricated

Plug Valves 3” thru 24”

DEZURIK

Model: G Series

HENRY PRATT CO.

Pratt Keystone 580 Series, #898

47 of 58 PAGES

10. ELECTRIC VALVE ACTUATORS

1. Electric Valve Actuators

Electric valve actuators shall be provided by the manufacturers listed herein, no equal.

AUMA

BETTIS/EIM

REXA

48 of 58 PAGES

11. MANUAL VALVE ACTUATORS

1. Manual Valve Actuators for Butterfly

Valves - Worm Gear Actuators (No Equal)

AUMA

DEZURIK

LIMITORQUE

MAXTORQUE

2. Manual Valve Actuators for Butterfly Valves - Travelling Nut Actuators (Or Approved Equal)

PRATT

49 of 58 PAGES

IV. SEWER

50 of 58 PAGES

Rev: 8/28/2024

1. MANHOLES & CLEANOUTS

1. Clean-Outs (Residential) BROOKS PRODUCTS Model: 1-RD

CHRISTY CONCRETE PRODUCTS

Model: F8

EISEL ENTERPRISES

Model: 1VB-VC

J&R CONCRETE

Model: V1-R

LONG BEACH IRON WORKS

Model: Apex

2. Manhole Covers & Frames 24”, 36” & 48” Std. Drawing SB-61

Note: Cast-iron lid to be marked “EMWD Sewer”

ALHAMBRA FOUNDRY

Model: A-1251 & A-1254

EVERETT ENTERPRISES

Model: GTS – Pont-A-Mousson

FAMEX FOUNDRY

Model: F-1251 & F-1254

NATIONAL CASTING CORP. (formerly NORFOLK CASTING)

CORP

Model: NC-2531 Model: NC-254 Model: NC-1348 with Pick Hole for EMWD Standard SB-30

NEENAH FOUNDRY

Model: R-1593

RIVERSIDE FOUNDRY

Model: 1251 & 1254

SOUTHBAY FOUNDRY

Model: SBF-1251 & 1254 Model: SBF-1348 with Pick Hole for EMWD Standard Drawing SB-30

51 of 58 PAGES

3. Manhole Covers & Frames Locking

Std. Drawing SB-8

Note: Cast-iron lid to be marked “EMWD Sewer”

ALHAMBRA FOUNDRY

Model: No. A-1175

FAMEX FOUNDRY

Model: F-1251

LONG BEACH IRON WORKS

Model: RE85R3PD GTS

NATIONAL CASTING CORP.

Model: NC-2531

NEENAH FOUNDRY

Model: R-1251

SOUTHBAY FOUNDRY

Model: SBF-1251

52 of 58 PAGES

Rev: 8/28/2024

4. Manhole Shafts, Cones, Flat Tops & Grade Rings 24” thru 48”

AMERICAN HIGHWAY PRODUCTS

AMERICAN PIPE

ASSOCIATED CONCRETE

B & W PRECAST CONSTR.

HOWARD ENTERPRISES

INLAND CONCRETE

MANHOLE BUILDERS

MANHOLE CONSTRUCTION SPECIALISTS, INC

MAR-CON PRODUCTS

OLSEN PRECAST

RIALTO CONCRETE

SAN DIEGO PRECAST

SOUTHWEST CONCRETE

5. Manhole Steps SOUTHWEST CONCRETE PRODUCTS Model: X040PS Model: X038PS

53 of 58 PAGES

Rev: 8/28/2024

2. SEWER PIPE & FITTINGS

1. Reinforced Concrete Pipe NORTHWEST PIPE

HYDRO CONDUIT

RIALTO PIPE

2. Sewer Pipe Polyvinyl Chloride (PVC) & Acrylonitrile-Butadiene-Styrene (ABS)

Fittings and pipe shall be from the same manufacturer when they make both.

If manufacturer only makes pipe, fittings from 2.b. shall be used.

ARMCO PIPE - (CONTECH)

CARLON PIPE

DIAMOND PLASTICS CORP.

SDR 35 PVC

JM EAGLE

WESTLAKE PIPE & FITTINGS (formerly NORTH AMERICAN PIPE CORP., NAPCO, and CERTAIN-

TEED CORP)

PRIME CONDUIT VYLON

21” thru 48”

VINYL TECH

White Knight

a. Molecularly Oriented Polyvinyl Chloride (PVCO), C909, 4” thru 12”

Note: May be used for water, sewer, or recycled water applications.

JM EAGLE

Model: Ultra Blue PVCO

WESTLAKE PIPE & FITTINGS

Aquamax IB PVCO

54 of 58 PAGES

Rev: 8/28/2024

b. PVC sewer fittings 4” thru 8” gravity use only

BUILDING PRODUCTS CO.

GPK

JCP COMPRESSION JOINTS

JM EAGLE

MULTI-FITTINGS CORP.

TIGRE

SDR 35 PVC

55 of 58 PAGES

Rev: 8/28/2024

2. SEWER PIPES & FITTINGS

a. PVC sewer fittings 4” thru 8” gravity use only

SYROCO INC

SDR 35

3. Sewer Repair Couplings MISSION RUBBER

PVC

MR56 44 ARC

MR56 66 ARC

MR56 88 ARC

MR56 1212 ARC

Clay

MR01 44 ARC

MR01 66 ARC

MR01 88 ARC

MR01 1212 ARC

4. Tapping Saddle JOINTS COUPLINGS

TAP-N-TEE

(Conditional/Emergency use only)

5. Vitrified Clay Pipe (VCP) Note: fittings to be from same manufacturer as pipe.

BUILDING PRODUCTS CO.

JCP Compression Joints

GLADDING MCBEAN CO.

“Speed-Seal”

MISSION CLAY PRODUCTS

“Band-Seal”

PACIFIC CLAY PRODUCTS

“Wedgelock”

56 of 58 PAGES

V. ELECTRICAL

57 of 58 PAGES

Rev: 8/28/2024

1. WIRING & BASIC ELECTRICAL MATERIALS

1. Insulated CP Test Connections & Blow-Off Connections Std. Drawing B-660 & B-662

#4 HMW – PE (High Molecular Wt-Polyethylene Coated) Stranded Wire Black

#12 TW – Solid Wire – Green or Yellow

2. Locating Wire Std. Drawing B-656

#14-1 UF Black Copper-Insulated Locating Wire

58 of 58 PAGES

Rev: 8/28/2024

1. WIRING & BASIC ELECTRICAL MATERIALS

3. Telemetry Cable

Std. Drawing B-533

ALCATEL DEDW

Telemetry wire, double-jacketed, filled polyethylene jacket for burial 5-mil copper shield, solid strand 6-pair, 19-gauge copper wire Alcatel DEDW.

(Approximately 5,000-foot. Rolls)

DISTRIBUTORS:

POWER AND TELEPHONE SUPPLY

4. Telemetry Hardware:

3M Splice Kit Model No. 72-N2

CHARLES INDUSTRIES

Pedestal Model No. CPLM8-1/GTE

ENTRELEC

Terminal Model No.

M4/6.SNB 0115686.13

Terminal End Stop Model No. 114836.00 DIN Rail Model No. 101598.26

DISTRIBUTORS:

CHARLES INDUSTRIES

REXEL ESD ELECTRICAL

ROYAL WHOLESALE ELECTRIC

5. Antenna Tower UNIVERSAL TOWERS