29580 Bison Corral System for Daniels Park.pdf

IFB No. 29580

GSPD TEMPLATE 7.14.2023 SD01

Department of General Services

PURCHASING DIVISION

www.denvergov.org/purchasing

Phone: 720.913.8100

City and County of Denver

Purchasing Division 201 W. Colfax Ave.

Department 304, 11th Floor Denver, CO 80202

Procurement Analyst Name: Sally Baca

Procurement Analyst Email: sally.baca@denvergov.org

Invitation for Bid

Bison Corral System for Daniels Park

SCHEDULE OF EVENTS

• Bid Issued May 15, 2024

• Deadline to Submit Additional Questions May 22, 2024 2:00 P.M. Local Time

• Response to Written Questions May 30, 2024

• Bid Due Date June 5, 2024 2:00 P.M. Local Time

Vendor offers to furnish to the City and County of Denver the materials, supplies, products or services requested in accordance with the specifications and subject to the Terms and Conditions described herein.

VENDOR SIGN HERE

Company Name:

By:

(Printed or Typed Name)

Signature:

Signature constitutes acceptance of all Terms and Conditions listed on this form and all documents attached.

Email:

Phone:

The City contracts with Rocky Mountain E-purchasing System (BidNet®) in the advertisement and facilitation of solicitations administered by the City's General Services Purchasing Division; therefore, respondents must ONLY rely on documents provided on the Rocky Mountain E-purchasing System (BidNet®) website or as communicated directly from the analyst. Only rely on this web address: https://www.bidnetdirect.com/colorado http://www.denvergov.org/purchasing

Table of Contents

SECTION A: GENERAL INFORMATION & IFB INSTRUCTIONS

A.1 BACKGROUND AND SCOPE:

A.2 ROCKY MOUNTAIN E-PURCHASING (BidNet®):

A.3 ELECTRONIC SUBMISSION OF BIDS:

A.4 BID QUESTIONS:

A.5 ADDENDA:

A.6 ACCEPTANCE PERIOD:

A.7 TECHNICAL REQUIREMENTS/STATEMENT OF WORK:

A.8 INVITATION FOR BID CONDITIONS AND PROVISIONS:

A.9 GRATUITIES AND KICKBACKS:

A.10 NON-COLLUSIVE VENDOR CERTIFICATION:

A.11 AWARDS:

A.12 EVALUATION AND AWARDS:

A.13 BRAND AND/OR TRADE NAMES:

A.14 PRODUCT/PERFORMANCE LITERATURE:

A.15 ENVIRONMENTAL MANAGEMENT SYSTEM, ENVIRONMENTAL POLICY, AWARENESS,

AND COMPLIANCE:

A.16 DISCLOSURE OF CONTENTS OF BIDS:

A.17 PROOF OF REGISTRATION WITH THE COLORADO SECRETARY OF STATE:

A.18 DIVERSITY AND INCLUSIVENESS – EXECUTIVE ORDER #101:

SECTION B: SCOPE OF WORK AND TECHNICAL REQUIREMENTS

B.1 PRODUCT SPECIFICATIONS

B.2 PLANS:

B.3 F.O.B. POINT:

B.4 DELIVERY/CONSIDERATIONS:

B.5 PAYMENT CONDITIONS:

B.6 WARRANTY GUARANTEE:

B.7 PRE-DELIVERY:

B.8 PREVAILING WAGES

B.9 MINIMUM WAGE ORDINANCE

B.10 PALLET CHARGE:

B.11 PATENTS:

B.12 REPAIR AND REPLACEMENT:

B.13 COOPERATIVE PURCHASING:

SECTION C: PRICING / BID ITEMS

C.1 PRICING INFORMATION:

C.2 PRICING INSTRUCTIONS:

C.3 CHANGES:

SECTION D: GENERAL CONDITIONS OF PURCHASE

SECTION E: ADDITIONAL REQUIRED INFORMATION

E.1 REFERENCE LISTING:

E.2 VENDOR'S CHECK LIST:

E.3 DENVER VENDOR SUSTAINABILITY:

E.4 SMALL BUSINESS INFORMATION REQUEST

E.5 VENDOR INFORMATION:

SECTION A: GENERAL INFORMATION & IFB INSTRUCTIONS

A.1 BACKGROUND AND SCOPE:

The City and County of Denver, hereinafter referred to as the City, desires to solicit bids relating to the purchase and installation of a bison corral system for Daniels Park, located at 8682 Daniels Park Rd, Sedalia, Colorado 80135.

Click HERE to go directly to the City’s detailed Scope of Work/ Requirements.

A.2 ROCKY MOUNTAIN E-PURCHASING (BidNet®):

The City is collaborating with Rocky Mountain E-purchasing System (BidNet®) in the advertisement and facilitation of Formal Invitations for Bids(IFBs) and Requests for Proposals (RFP) administered by the City's General Services Purchasing Division.

It is a requirement of this IFB/ RFP that interested parties familiarize themselves and register with BidNet®;

vendors who do not register may be considered non-responsive.

Registration with BidNet® is available at NO CHARGE and allows vendors access to view governmental bids posted on BidNet®; they offer an additional notification service option with an associated fee. It is the responsibility of the vendor to evaluate and select the service option of their choice.

• The City is not responsible for the actions or lack thereof on the part of the vendor in regards to their interaction with BidNet®, or any other third-party bid notification service in relation to this IFB/RFP.

More information is available at: www.rockymountainbidsystem.com or by calling 1-800-835-4603.

A bid opening will be held on the date, time and location specified on the cover sheet Submitted pricing will be shared with interested persons at that time.

A.3 ELECTRONIC SUBMISSION OF BIDS:

Submission of bids for this solicitation may only be done electronically through BidNet®. Bids must be submitted at www.rockymountainbidsystem.com, no later than the date and time indicated in the bid.

Vendors who feel they are unable to prepare and submit an electronic submittal should submit a request in writing to the Analyst, no later than the Question due date, for permission and instructions for submitting a hardcopy bid.

Your proposal shall be in the following order. Do not upload individual documents. There shall be only one document uploaded to the bid system per Section. Individual documents will not be accepted.

Section 1 – Required Information:

a) Signed Cover Sheet

b) Addenda acknowledgements, if applicable

c) References, Section E.1

d) Vendor Sustainability Information, Section E.3

e) Small Business Information Request, Section E.4 (Optional)

f) Vendor Information, Section E.5

g) XO 101 Diversity & Inclusiveness Form (Submit electronically - see link in Section A.18) http://www.rockymountainbidsystem.com/ http://www.rockymountainbidsystem.com/

Section 2 – Pricing Proposal:

a) Price Proposal/Pricing Matrix must be submitted as an Excel spreadsheet. Do not send as a pdf file. See Section C for details

A.4 BID QUESTIONS:

The City shall not be bound by and the Vendor shall not request or rely on any oral interpretation or clarification of this IFB. Therefore, any questions regarding this IFB are encouraged and should be submitted in writing by email to:

City Procurement Analyst: Sally Baca E-Mail: sally.baca@denvergov.org

Questions received up to deadline to submit question in the Schedule of Events will be answered in writing per the Schedule of Events. Answers to questions from any Vendor will be provided to all Vendors.

All communications regarding this IFB shall only be through the City’s Analyst listed above. No communication is to be directed to any other City personnel.

A.5 ADDENDA:

In the event it becomes necessary to revise, change, modify or cancel this IFB or to provide additional information, addenda will be issued and made available on BidNet®. It is the responsibility of the vendor to confirm that they have acquired all addenda related to this solicitation and they have reviewed/ complied with the requirements therein.

A.6 ACCEPTANCE PERIOD:

Bids in response to this IFB shall indicate that they are valid for a period no less than 120 days from the closing date.

A.7 TECHNICAL REQUIREMENTS/STATEMENT OF WORK:

Section B of this IFB contains our proposed Scope of Work and/or Technical Requirements. This document shall form the basis of a Purchase order covering the subject matter of this IFB. Exceptions or deviations to this IFB must not be added to the bid pages but must be on vendor's letterhead and accompany bid. Any exceptions to this documentation will be taken into consideration when evaluating bids submitted. The City reserves the right to reject any or all of your proposed modifications. The City welcomes cost saving bids which still satisfy all technical and business objectives.

A.8 INVITATION FOR BID CONDITIONS AND PROVISIONS:

This bid must be signed by a duly authorized official of the proposing company. The completed and signed bid (together with all required attachments) must be returned to the Department of General Services on or before the time and date of the bid opening shown on page one. This bid MUST submitted electronically through the Rocky Mountain E-purchasing System (BidNet®).

All participating vendors, by their signature hereunder, shall agree to comply with all of the conditions, requirements and instructions of this IFB as stated or implied herein. Any alteration, erasure or interlineation by the vendor in this bid shall constitute cause for rejection by the Manager of General Services. Exceptions or deviations to this IFB must not be added to the bid pages, but must be on vendor's letterhead and accompany bid.

Should the City omit anything from this IFB which is necessary to a clear understanding of the work, or should it appear that various instructions are in conflict, then the vendor shall secure written instructions from the Manager of General Services at least forty-eight (48) hours prior to the time and date of the bid opening shown in page one.

Typographical errors in entering quotations on bid may result in loss of award of contract purchase order.

All vendors are required to complete all information requested in this IFB. Failure to do so may result in the disqualification of bid.

The City reserves the right to postpone or cancel this IFB, or reject all bids, if determined to be in the best interest of the City.

Unit price for each item proposed on shall be shown and shall be for the unit of measurement indicated. In case of error in extension of prices, the unit price will govern.

Any omissions as to the manufacturer's brand name, code or stock number, or style that is asked for shall be considered cause to reject any or all items on bid if deemed to be in the best interest of the City to do so.

The Manager of General Services reserves the right to waive any technical or formal errors or omissions and to reject any and all bids, or to award contract for the items hereon, either in part or whole, if deemed it to be in the best interests of the City.

The successful vendor shall be in complete compliance with all of the specifications, terms and conditions of this IFB as outlined above. The City shall have the right to inspect the facilities and equipment of the successful vendor to ensure such compliance.

No bid shall be accepted from, and no purchase order or contractual contract will be awarded to, any person, firm or corporation that is in arrears to the City and County of Denver, upon debt or contract, or that is a defaulter, as surety or otherwise, upon any obligation to the City, or that has failed to attain or demonstrate compliance with any law, ordinance, City regulation, or contract term or condition as may be provided for or required in any City contract, or that may be deemed irresponsible or unreliable by the Manager of General Services. Vendors may be required to submit satisfactory evidence that they have a practical knowledge of the particular work bid upon and that they have the necessary financial resources to perform and complete the work outlined in this IFB.

The vendor agrees to abide by all the laws, regulations and administrative rulings of the United States, the State of Colorado and the City and County of Denver, securing all necessary licenses and permits in connection with the bids.

All materials, supplies and equipment furnished or services performed under the terms of this purchase order or contractual contract shall comply with the requirements and standards specified in the Williams-Steiger Occupational Safety and Health Act of l970 (Public Law 9l-596) as well as with other applicable federal, state and local codes.

All merchandise furnished or service performed must comply with City and State Codes.

In the event that this IFB requires a formal contract to be prepared by the City and County of Denver, the successful vendor will properly sign and furnish necessary performance bonds, insurances, Workers'

Compensation, etc., as required by the respective bid within ten (l0) days (unless a longer period is allowed) from the date of receipt of the formal contract forms.

All vendors must take into consideration that only the City's contract documents will be used in the finalization of this contract. This will include the total bid and the City Attorney's general form.

The City shall not be liable for any costs incurred by Vendor in the preparation of proposals or for any work performed in connection therewith or any work subsequent to the submission and prior to the execution of any contract.

A.9 GRATUITIES AND KICKBACKS:

It shall be a breach of ethical standards for any person to offer, give, or agree to give any employee or former employee (within six months of termination from City employment), or for any employee or former employee (within six months of termination from City employment) to solicit, demand, accept, or agree to accept from another person, a gratuity or an offer of employment in connection with any decision, approval, disapproval, recommendation, preparation of any part of a program requirement or a purchase request, influencing the content of any specification or procurement standard, rendering of advice, investigation, auditing, or in any other advisory capacity in any proceeding of application, request for ruling, determination, claim or controversy, or other particular matter, pertaining to any program requirement or a contract or subcontract, or to any solicitation or bid therefore.

It shall be a breach of ethical standards for any payment, gratuity, or offer of employment to be made by or on behalf of a subcontractor under a contract to the prime vendor or higher tier subcontractor or any person associated therewith, as an inducement for the award of a subcontract or order.

In the event that any gratuities or kickbacks are offered or tendered to any City and County of Denver employee, the bid shall be disqualified and shall not be reinstated.

A.10 NON-COLLUSIVE VENDOR CERTIFICATION:

By the submission of this bid, the vendor certifies that:

A. The bid has been arrived at by the vendor independently and has been submitted without collusion with any other vendor.

B. The contents of the bid have not been communicated by the vendor, nor, to its best knowledge and belief, by any of its employees or agents, to any person not an employee or agent of the vendor or its surety on any bond furnished herewith, and will not be communicated to any such person prior to the official opening of the bid.

C. No vendor shall submit more than one bid for this purchase. It shall be the responsibility of each vendor to obtain the prior written permission of the Director of Purchasing before bid opening in every situation in which the vendor, due to corporate association or other affiliation, may be found to be impermissibly associated with another vendor. Failure to observe this requirement could result in all such affiliated bids being rejected.

A.11 AWARDS:

One award will be made on an "all or none" basis. Prices must be shown for each item listed. Bids submitted without individual item prices listed will be considered as non-responsive and rejected.

A.12 EVALUATION AND AWARDS:

The criteria to be used for the bid evaluation includes but is not limited to:

(a) Price

(b) Specification compliance

(c) Qualified, Responsible, Responsive_ {D.R.MC. Sec. 20-61-(d), (f), (g)}

(d) schedule/ lead-time

Any award as a result of this IFB shall be contingent upon the execution of a City purchase order.

A.13 BRAND AND/OR TRADE NAMES:

Each vendor shall agree to furnish the proposed services, equipment or materials that are called for on the face of this IFB in strict accordance with the conditions, requirements and specifications of this IFB to propose. In the event the City includes trade names as a part of the work description of any item, any participating vendor may submit quotations on other trade-named products, providing they are equivalent, unless the wording "No Substitute"/ "Brand Name Only"/ "No Approved Equals" is indicated. When the description includes the wording "No Substitute"/ "Brand Name Only"/ "No Approved Equals" in addition to the trade name, quotations of price will be accepted only on the trade-named product indicated. All disputes concerning grades and quality of merchandise or work shall be determined by the Director of Purchasing or his/her authorized representative.

A.14 PRODUCT/PERFORMANCE LITERATURE:

Bids submitted for products considered by the seller to be equal to or better than the brand names or manufacturer's catalog references specified herein, must be submitted with technical literature and/or detailed product brochures for the City's use to evaluate the product(s) offered. Bids submitted without this product information may be considered as non-responsive and rejected.

The undersigned vendor shall agree to furnish, upon the written request of the City's Analyst, any additional information needed to substantiate or clarify the design and/or performance characteristics of the materials he/she proposes to furnish.

The City and County of Denver reserves the right at the time of final evaluation of this IFB, to request of any vendor proposing an "Approved Equal" technical data, test results or other pertinent information as evidence that the substitute offered is equal to or better than the specification requirement.

The successful vendor will be required to furnish manuals and parts books on items proposed, plus current repair parts price sheets.

A.15 ENVIRONMENTAL MANAGEMENT SYSTEM, ENVIRONMENTAL POLICY, AWARENESS, AND

COMPLIANCE:

Some City operations can pose risks to human health and the environment. Proactive environmental management can reduce risk and prevent harm.

The City is certified to the ISO 14001 international standard for Environmental Management System (EMS). The City’s EMS ensures that all aspects of City operations with the potential to cause significant environmental impacts are proactively managed. Through the EMS, the City has adopted environmental procedures to ensure compliance with environmental requirements, protect workers and the public, conserve energy and resources, and prevent pollution. The EMS reinforces the City’s position that each person providing products or services to the City, the City’s business partners, is responsible for conducting activities in a manner that will protect public health and the health of their employees and protect the environment. The EMS also requires business partners ensure the competency of their staff with respect to their environmental impacts and duties.

All City business partners are required by statute, regulation, and contract to comply with all federal, state, and local environmental regulations and requirements when working for the City. The City’s EMS requires all City business partners to be aware of the City’s Environmental Policy, be aware of the impacts their actions may have on the environment and implement practices to manage their actions in a manner that complies with environmental requirements and the City’s environmental performance goals. The City’s Environmental Policy, found here:

https://www.denvergov.org/files/assets/public/public-health-and-environment/documents/eq/2017-denver-environmental-policy.pdf, outlines the City’s commitment to environmental protection, continual improvement, and sustainability in all areas of City business and operations.

A.15.a Environmentally Preferable Purchasing (EPP) Guidance and Prohibitions:

The City defines Environmentally Preferable products and services as having a lesser or reduced effect on human health and the environment when compared with competing products and services that serve the same purpose.

The City’s EPP evaluation may extend to raw materials acquisition, energy consumption in manufacturing and transport, packaging, recyclability, waste disposal, and many other factors.

Applicable EPP considerations may factor in the evaluation process of this IFB. Vendors are encouraged to describe any EPP attributes of the goods or services they offer to the City.

A.16 DISCLOSURE OF CONTENTS OF BIDS:

The contents of all bids become a matter of public record and a “Record” under the Colorado Open Records Act, § 24-72-201, et seq., C.R.S. (“CORA”). Upon request to the City, the disclosure of Records is mandatory, with the exception of those Records under CORA which are excluded from disclosure sometimes identified as business or trade secrets or proprietary matters (“Protected Items”). Protected Items so marked may not be disclosed unless disclosure is otherwise required under CORA. If a request is made under CORA for Records , the City will use reasonable efforts to notify the Vendor of the request, and it will be the responsibility of the Vendor to appropriately redact Protected Items from its submittal to the City. If a Vendor does not respond to the City to redact Protected Items as requested all Records may be disclosed by the City. If necessary, a Vendor shall seek a court order to protect their Protected Items, and will defend, indemnify, and hold harmless the City from any claim or action related to the City’s withholding of Protected Items.

A.17 PROOF OF REGISTRATION WITH THE COLORADO SECRETARY OF STATE:

Successful vendors that are required to furnish a Certificate of Good Standing from the Colorado Secretary of State’s Office, as proof that they are properly registered to do business in the State of Colorado, prior to finalization of award and contracting.

A.18 DIVERSITY AND INCLUSIVENESS – EXECUTIVE ORDER #101:

Definitions

Diversity: Diversity refers to the extent to which a vendor has people from diverse background or communities working in its organization at all levels, is committed to providing equal access to business opportunities and achieving diversity in procurement decisions for supplies, equipment, and services, or promotes training and https://www.denvergov.org/files/assets/public/public-health-and-environment/documents/eq/2017-denver-environmental-policy.pdf https://www.denvergov.org/files/assets/public/public-health-and-environment/documents/eq/2017-denver-environmental-policy.pdf technical assistance to diverse businesses and communities such as mentoring and outreach programs and business engagement opportunities.

Inclusiveness: Inclusiveness, for purposes of Executive Order No. 101, includes the extent to which a contractor/consultant invites values, perspectives and contributions of people from diverse backgrounds and integrates diversity into its hiring and retention policies, training opportunities, and business development methods to provide an equal opportunity for each person to participate, contribute and succeed within the organization’s workplace. Inclusiveness also includes the extent to which businesses have an equal opportunity to compete for new business opportunities and establish new business relationships in the private and public sector.

Requirements Using the attached form, entitled “Diversity and Inclusiveness in City Solicitations Information Request Form”, please state whether you have a diversity and inclusiveness program for employment and retention, procurement and supply chain activities, or customer service, and provide the additional information requested on the form.

The information provided on the Diversity and Inclusiveness in City Solicitations Request Form will provide an opportunity for City contractors/consultants to describe their own diversity and inclusiveness practices.

Contractors/Consultants are not expected to conduct intrusive examinations of their employees, managers, or business partners in order to describe diversity and inclusiveness measures. Rather, the City simply seeks a description of the contractor/consultant’s current practices, if any.

Diversity and Inclusiveness information provided by City contractors/consultants in response to City solicitations for services or goods will be collated, analyzed, and made available in reports consistent with City Executive Order No. 101. However, no personally identifiable information provided by or obtained from contractors/consultants will be in such reports.

A completed and signed copy of the “Diversity and Inclusiveness in City Solicitations Request Form” must be included with your IFB or RFP response. Failure to include this form will render your IFB or RFP non-responsive. The required document is available at: https://us.openforms.com/Form/57f3a8ea-39b7-4115-be17- 1770f38d3cf6 Proposing vendors are required to fill in and submit this form online as part of their submission.

The remainder of this page intentionally left blank https://us.openforms.com/Form/57f3a8ea-39b7-4115-be17-1770f38d3cf6 https://us.openforms.com/Form/57f3a8ea-39b7-4115-be17-1770f38d3cf6

SECTION B: SCOPE OF WORK AND TECHNICAL REQUIREMENTS

B.1 PRODUCT SPECIFICATIONS

Installation and purchase of materials with the following specifications, also see plan attached in Section B2:

Specification Bid Item: 1

Product Name Hydraulic Bison Squeeze Chute, Left Hand Controls

Product Code

HBSLH

Product Description

• Bison squeeze chute to be designed for safe, efficient, and humane handling of bison. The squeeze chute to include a belt driven back door, tongue and groove rubber plank flooring, cam-style door latches with pre-greased zerks, v-style headgate that opens bottom first to deter the animals from jumping into the headgate and a spring loaded lexan sheeted crash gate that is hydraulically adjustable from 10” to 24” to accommodate different bison sizes. The squeeze chute to include a neck extender, manual side exits on both sides, rear dutch doors, crash gate safety locks and pre-greased zerks on all pivot points.

Purpose Safely and efficiently secure bison for husbandry activities such as examination, tagging or veterinary treatment.

Dimensions Exterior - 8' tall x 6' wide x 11' long, Inside - 6'6" tall x 33" wide x 9' long

Weight 3800lbs

Materials 3" x 3" x .188 hollow structural section frame, 12-gauge sheet metal, pre-greased zerks on all pivot points. All hardware to be included. Supplier is responsible for loading/unloading and setup.

Product Images

Specification Bid Item: 2

Product Name Hydraulic Ready Chute

Product Code

HRC

Product Description The ready chute to have a wedge shape design to bring the alleyway from 6' down to 3' wide and to include a hydraulic bump gate to keep the animal pointed towards the squeeze chute and help move them into the squeeze when needed.

Purpose Safely and efficiently move animals from a 6' wide alleyway into the squeeze chute.

Dimensions 10' long x 6' wide x 7' tall

Weight 1200lbs

Materials 2" x 2" x .125 hollow structural section gate and frame, 12-gauge sheet metal, 2-7/8" pipe and 2-3/8" pipe used on gate pivot point. Pre-greased zerks on all pivot points. All hardware to be included. Supplier is responsible for loading/unloading and set up

Specification Bid Item: 3

Product Name Manual Slide Gate – 6’ L x 8’H - Sheeted

Product Code

8-SGM6

Product Description Sheeted manual slide gate with roller bearings and frame. Supplier to mount side gate to panels per plans.

Purpose Sort and separate livestock within the handling facility. Design to ensure the safety of the animal and the handler.

Slide gate roller bearings to provide effortless manual operation. Install rubber material on the door guides and rollers to minimize noise levels and help keep animals calm.

Dimensions 1' wide x 8' tall x 6' long. Panel is sheeted from ground level to 54” high with 8 horizontal bars

Weight 570lbs

Materials 2" x 2" x .125 hollow structural section gate and frame with 2" x 4" x .125 hollow structural section bottom frame door guide, 12-gauge sheet metal, sealed roller bearings on all rollers. Each end of the panels to be attached to the CPMB's using 3/8" grade 5 bolts - All hardware to be included. Supplier is responsible for loading/unloading and setup.

Image for reference. Lengths vary – see product dimensions.

Specification Bid Item: 4

Product Name Manual Slide Gate – 9’ L x 8’H – Sheeted

Product Code

8-SGM9

Product Description Sheeted manual slide gate with roller bearings and frame. To be mounted to panels per plan

Purpose Sort and separate livestock within handling facilities. Design to ensure the safety of the animal and the handler.

Slide gate roller bearings to provide effortless manual operation. Rubber material to be used on the door guides and rollers to minimize noise levels and help keep animals calm.

Dimensions 1' wide x 8' tall x 9' long. Panel is sheeted from ground level to 54” high with 8 horizontal bars.

Weight 680lbs

Materials 2" x 2" x .125 hollow structural section gate and frame with 2" x 4" x .125 hollow structural section bottom frame door guide, 12-gauge sheet metal, sealed roller bearings on all rollers. Each end of the panels to be attached to the CPMB's using 3/8" grade 5 bolts - All hardware to be included. Supplier is responsible for loading/unloading and setup.

Specification Bid Item: 5

Product Name Manual Slide Gate – 12’ L x 8’H – Sheeted

Product Code

8-SGM12

Product Description Sheeted manual slide gate with roller bearings and frame. To be mounted to panels per plan

Purpose Sort and separate livestock within handling facilities. Design to ensure the safety of the animal and the handler.

Slide gate roller bearings to provide effortless manual operation. Rubber material to be used on the door guides and rollers to minimize noise levels and help keep animals calm.

Dimensions 1’ wide x 8’ tall x 12’ long. Panel is sheeted from ground level to 54” high with 8 horizontal bars

Weight 1000lbs

Materials 2” x 2” x .125 hollow structural section gate and frame with 2” x 4” x .125 hollow structural section bottom frame door guide, 12-gauge sheet metal, sealed roller bearings on all rollers. Each end of the panels to be attached to the CPMB’s using 3/8” grade 5 bolts – All hardware to be included. Supplier is responsible for loading/unloading and setup.

Specification Bid Item: 6

Product Name Corral Panel – 8’ L x 6’ H with 6 Horizontal Bars

Product Code

CP8

Product Description Corral panel - 8' long x 5'-2" tall (6' tall when installed on screw piles SP-10) with 6 horizontal bars

Purpose Animal enclosure for general livestock use. Enclosure to be designed to meet the requirements of ASCE-7 section

47.5 for guardrails (human).

Dimensions 8’ long x 5'-2" tall (6'-0” tall when installed on screw piles SP-10) with 6 horizontal bars

Weight 210lbs

Materials 2" x 2" x .125 hollow structural section square tube

Additional Information Position bottom bar 10" from ground and position all mid bars equal on center. Weld all joints. Bolt panels together with 4 - 3/8" grade 5 bolts and lock nuts. Secure panels to screw piles (SP10) using mounting brackets (CPMB). Attached each end of the panels to the CPMB's using 3/8" grade 5 bolts - All hardware to be included.

Supplier is responsible for loading/unloading and setup.

Specification Bid Item: 7

Product Name Corral Panel – 12’ L x 6’ H with 6 Horizontal Bars

Product Code

CP12

Product Description Corral panel -12' long x 5'-2" tall (6' tall when installed on screw piles SP-10) with 6 horizontal bars

Purpose Animal enclosure for general livestock use. Enclosure to be designed to meet the requirements of ASCE-7 section

47.5 for guardrails (human).

Dimensions 12’ long x 5'-2" tall (6' tall when installed on screw piles SP-10) with 6 horizontal bars

Weight 280lbs

Materials 2" x 2" x .125 hollow structural section square tube

Additional Information Position bottom bar 10" from ground and position all mid bars equal on center. Weld all joints. Bolt panels bolt together with 4 - 3/8" grade 5 bolts and lock nuts. Secure panels to screw piles (SP10) using mounting brackets (CPMB). Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts - All hardware to be included.

Supplier is responsible for loading/unloading and set up.

Specification Bid Item: 8

Product Name Corral Panel – 16’ L x 6’ H with 6 Horizontal Bars

Product Code

CP16

Product Description Corral panel -16' long x 5'-2" tall (6' tall when installed on screw piles SP-10) with 6 horizontal bars.

Purpose Animal enclosure for general livestock use. Enclosure to be designed to meet the requirements of ASCE-7 section

47.5 for guardrails (human).

Dimensions 16' long x 5'-2" tall (6' tall when installed on screw piles SP-10) with 6 horizontal bars

Weight 350lbs

Materials 2" x 2" x .125 hollow structural section square tube

Additional Information Position bottom bar 10" from ground and position all mid bars equal on center. Weld all joints. Bolt panels bolt together with 4 - 3/8" grade 5 bolts and lock nuts. Secure panels to screw piles (SP10) using mounting brackets (CPMB). Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts - All hardware to be included.

Supplier is responsible for loading/unloading and set up.

Specification Bid Item: 9

Product Name Corral Panel – 8’ L x 6’ H with 5 Horizontal Bars - Sheeted

Product Code

CPS8

Product Description Corral panel - 8' long x 5'-2" tall (6'-0" tall when installed on screw piles SP10) with 5 horizontal bars – panel is sheeted 60” high from ground level with 12-gauge sheeted material

Purpose Animal enclosure for general livestock use. Enclosure to be designed to meet the requirements of ASCE-7 section 47.5 for guardrails (human).

Dimensions 8' long x 5'-2" tall (6'-0" tall when installed on screw piles SP10) with 5 horizontal bars – panel is sheeted 60” high from ground level with 12-gauge sheeted material

Weight 210lbs

Materials 2" x 2" x .125 hollow structural section square tube

Additional Information Position bottom bar 10" from ground. Panel is sheeted 60” high from ground level. Provide a 6" tall horizontal window from 32" to 38" height to step for handlers to scale the panels if needed. Weld all joints. Bolt panels bolt together with 4 - 3/8" grade 5 bolts and lock nuts. Secure panels to screw piles (SP10) using mounting brackets (CPMB). Attached each end of the panels to the CPMB's using 3/8" grade 5 bolts - All hardware to be included.

Supplier is responsible for loading/unloading and set up.

Specification Bid Item: 10

Product Name Corral Panel – 12’ L x 6’ H with 5 Horizontal Bars – Sheeted

Product Code

CPS12

Product Description Corral panel - 12' long x 5'-2" tall (6'-0" tall when installed on screw piles SP10) with 5 horizontal bars - panel is sheeted 60” high from ground level with 12-gauge sheeted material

Purpose Animal enclosure for general livestock use. Enclosure to be designed to meet the requirements of ASCE-7 section

47.5 for guardrails (human).

Dimensions 12' long x 5'-2" tall (6'-0" tall when installed on screw piles SP10) with 5 horizontal bars - panel is sheeted 60” high from ground level with 12-gauge sheeted material

Weight 280lbs

Materials 2" x 2" x .125 hollow structural section square tube

Additional Information Position bottom bar 10" from ground. Panel is sheeted 60” high from ground level. Provide a 6" tall horizontal window from 32" to 38" height to step for handlers to scale the panels if needed. Weld all joints. Bolt panels together with 4 - 3/8" grade 5 bolts and lock nuts. Secure panels to screw piles (SP10) using mounting brackets (CPMB). Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts - All hardware to be included.

Supplier is responsible for loading/unloading and setup.

Specification Bid Item: 11

Product Name Corral Panel – 16’ L x 6’ H with 5 Horizontal Bars – Sheeted

Product Code

CPS16

Product Description 16' long x 5'-2" tall (6'-0" tall when installed on screw piles SP10) with 5 horizontal bars - panel is sheeted 60” high from ground level with 12-gauge sheeted material

Purpose Animal enclosure for general livestock use. Enclosure to be designed to meet the requirements of ASCE-7 section

47.5 for guardrails (human).

Dimensions 16' long x 5'-2" tall (6'-0" tall when installed on screw piles SP10) with 5 horizontal bars - panel is sheeted 60” high from ground level with 12-gauge sheeted material

Weight 350lbs

Materials 2" x 2" x .125 hollow structural section square tube

Additional Information Position bottom bar 10" from ground. Panel is sheeted 60” high from ground level. Provide a 6" tall horizontal window from 32" to 38" height to step for handlers to scale the panels if needed. Weld all joints. Bolt panels together with 4 - 3/8" grade 5 bolts and lock nuts. Secure panels to screw piles (SP10) using mounting brackets (CPMB). Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts - All hardware to be included.

Supplier is responsible for loading/unloading and setup.

Specification Bid Item: 12

Product Name Corral Panel – 8’ L x 7’ H with 7 Horizontal Bars – Sheeted

Product Code

7-CPS8

Product Description 8' long x 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars – panel is sheeted 54” high from ground level with 12-gauge sheet metal

Purpose Animal enclosure for containment of animals within the working facilities.

Dimensions 8' long x 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars - panel is sheeted 54” high from ground level with 12-gauge sheet metal

Materials 2" x 2" x .125 hollow structural section square tube

Additional Information Position all bars equal on center. Panel is sheeted 54” high from ground level. Weld all joints. Bolt panels together with 4 - 3/8" grade 5 bolts and lock nuts. Bolt panels to slide gates. Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts - All hardware to be included. Supplier is responsible for loading/unloading and setup.

Specification Bid Item: 13

Product Name Corral Panel – 10’ L x 7’ H with 7 Horizontal Bars – Sheeted

Product Code

7-CPS10

Product Description 10' long x 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars - panel is sheeted 54” high from ground level with 12-gauge sheet metal

Purpose Animal enclosure for containment of animals within the working facilities.

Dimensions 10' long x 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars - panel is sheeted 54” high from ground level with 12-gauge sheet metal

Materials 2" x 2" x .125 hollow structural section square tube

Additional Information Position all bars equal on center. Panel is sheeted 54” high from ground level. Weld all joints. Bolt panels together with 4 - 3/8" grade 5 bolts and lock nuts. Bolt panels to slide gates. Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts - All hardware to be included. Supplier is responsible for loading/unloading and setup.

Specification Bid Item: 14

Product Name Corral Panel – 12’ L x 7’ H with 7 Horizontal Bars – Sheeted

Product Code

7-CPS12

Product Description 12' long x 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars - panel is sheeted 54” high from ground level with 12-gauge sheet metal

Purpose Animal enclosure for containment of animals within the working facilities.

Dimensions 12' long x 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars - panel is sheeted 54” high from ground level with 12-gauge sheet metal

Materials 2" x 2" x .125 hollow structural section square tube

Additional Information Position all bars equal on center. Panel is sheeted 54” high from ground level. Weld all joints. Bolt panels together with 4 - 3/8" grade 5 bolts and lock nuts. Bolt panels to slide gates. Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts - All hardware to be included. Supplier is responsible for loading/unloading and setup.

Specification Bid Item: 15

Product Name Corral Panel – 16’ L x 7’ H with 7 Horizontal Bars – Sheeted

Product Code

7-CPS16

Product Description 16' long x 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars - panel is sheeted 54” high from ground level with 12-gauge sheet metal

Purpose Animal enclosure for containment of animals within the working facilities.

Dimensions Corral panel is 16' long x 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars - panel is sheeted 54” high from ground level with 12-gauge sheet metal.

Weight 850lbs - 16' panel

Materials 2" x 2" x .125 hollow structural section square tube

Additional Information Position all bars equal on center. Panel is sheeted 54” high from ground level. Weld all joints. Bolt panels together with 4 - 3/8" grade 5 bolts and lock nuts. Bolt panels to slide gates. Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts - All hardware to be included. Supplier is responsible for loading/unloading and setup.

Specification Bid Item: 16

Product Name Swing Gate – 12’ L x 6’ H with 6 Horizontal Bars – 2” Square Tube

Product Code

SG12

Product Description Swing gate is 12' long X 5'-2" tall (6'-0" tall when installed on screw piles SP10) with 6 horizontal bars

Purpose Animal enclosure for general livestock use. Enclosure to be designed to meet the requirements of ASCE-7 section

47.5 for guardrails (human).

Dimensions 12' long X 5'-2" tall (6'-0" tall when installed on screw piles SP10) with 6 horizontal bars

Weight 340 lbs.

Materials Gate - 2" x 2" x .125 hollow structural section square tube Hinges - 1.5" x .240 drawn over mandrel seamless pipe and 1" cold rolled shaft Latches - 5/16" grade 30 chain.

Additional Information Position bottom bar 10" from ground and all mid bars positioned equal on center. Weld all joints. Mount swing gates onto swing gate frames (SGF12). Hinges to contain pre-greased nipples to increase function and durability.

Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts. All hardware to be included. Supplier is responsible for loading/unloading and setup.

Product Images Image of latch for reference, gate image for reference. Lengths and number of horizontal bars vary – see product dimensions.

Specification Bid Item: 17

Product Name Swing Gate – 12’ L x 6’ H with 5 Horizontal Bars – 2” Square Tube - Sheeted

Product Code

SGS12

Product Description 12' long X 5'-2" tall (6'-0" tall when installed om screw piles SP10) with 5 horizontal bars – gate is sheeted 60” high from ground level with 12-gauge sheet metal

Purpose Animal enclosure for general livestock use. Enclosure to be designed to meet the requirements of ASCE-7 section

47.5 for guardrails (human).

Dimensions Swing gate is 12' long X 5'-2" tall (6'-0" tall when installed on screw piles SP10) with 5 horizontal bars - gate is sheeted 60” high from ground level with 12-gauge sheet metal.

Weight 340 lbs.

Materials Gate - 2" x 2" x .125 hollow structural section square tube and 12-gauge sheet metal Hinges - 1.5" x .240 drawn over mandrel seamless pipe and 1" cold rolled shaft, Latches - 5/16" grade 30 chain.

Additional Information Position bottom bar 10" from ground and all mid bars positioned equal on center. Weld all joints. Mount swing gates onto swing gate frames (SGF12). Hinges to contain pre-greased nipples to increase function and durability.

Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts. All hardware to be included. Supplier is responsible for loading/unloading and setup.

Product Images Image of latch for reference, gate image for reference. Lengths and number of horizontal bars vary – see

Specification Bid Item: 18

Product Name Safety Gates for 3-Way Sorting – 6’ L x 7’ H with 5 Horizontal Bars – 2” Square Tube - Sheeted

Product Code

7-GS6

Product Description Safety gate is 6' long X 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 5 Horizontal Bars – 2” Square Tube - gate is sheeted 60” high from ground level with 12-gauge sheet metal

Purpose Animal enclosure for general livestock use. Enclosure to be designed to meet the requirements of ASCE-7 section

47.5 for guardrails (human).

Dimensions 6' long X 6'-2" tall (7'-0" tall when installed on screw piles SP10) - gate is sheeted 60” high from ground level with 12-gauge sheet metal

Weight 340 lbs.

Materials Gate - 2" x 2" x .125 hollow structural section square tube and 12-gauge sheet metal Hinges - 1.5" x .240 drawn over mandrel seamless pipe and 1" cold rolled shaft Latches - 5/16" grade 30 chain

Additional Information Position bottom bar 10" from ground. Gate is sheeted 60” high from ground level. Provide a 6" tall horizontal window from 32" to 38" height to step for handlers to scale the panels if needed. Weld all joints. Hinges to contain pre-greased nipples to increase function and durability. Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts - All hardware to be included. Supplier is responsible for loading/unloading and setup.

Product Images Image of latch for reference, gate image for reference. Lengths and number of horizontal bars vary – see

Specification Bid Item: 19

Product Name Swing Gate – 4’ L x 7’ H with 7 Horizontal Bars – 2” Square Tube - Sheeted

Product Code

7-SGS4

Product Description Swing gate is 4' long X 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars - gate is sheeted 54” high from ground level with 12-gauge sheet metal

Purpose Animal enclosure for general livestock use. Enclosure to designed to meet the requirements of ASCE-7 section

47.5 for guardrails (human).

Dimensions 4' long X 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars - gate is sheeted 54” high from ground level with 12-gauge sheet metal.

Weight 340 lbs.

Materials Gate - 2" x 2" x .125 hollow structural section square tube and 12-gauge sheet metal Hinges - 1.5" x .240 drawn over mandrel seamless pipe and 1" cold rolled shaft Latches - 5/16" grade 30 chain

Additional Information Position bottom bar 10" from ground. Panel is sheeted 54” high from ground level. Provide a 6" tall horizontal window from 32" to 38" height to step for handlers to scale the panels if needed. Weld all joints. Hinges to contain pre-greased nipples to increase function and durability. Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts. All hardware to be included. Supplier is responsible for loading/unloading and setup.

Product Images Image of latch for reference, gate image for reference. Lengths and number of horizontal bars vary – see

Specification Bid Item: 20

Product Name Swing Gate – 6’ L x 7’ H – with 7 Horizontal Bars – 2” Square Tube - Sheeted

Product Code

7-SGS6

Product Description Swing gate is 6' long X 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars sheeted -gate is sheeted 54” high from ground level with 12-gauge sheet metal

Purpose Animal enclosure for general livestock use. Enclosure to be designed to meet the requirements of ASCE-7 section

47.5 for guardrails (human).

Dimensions 6' long X 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars sheeted - gate is sheeted 54” high from ground level with 12-gauge sheet metal

Weight 340 lbs.

Materials Gate - 2" x 2" x .125 hollow structural section square tube and 12-gauge sheet metal Hinges - 1.5" x .240 drawn over mandrel seamless pipe and 1" cold rolled shaft Latches - 5/16" grade 30 chain

Additional Information Position bottom bar10" from ground. Panel is sheeted from ground level to 54” high. Provide a 6" tall horizontal window from 32" to 38" height to step for handlers to scale the panels if needed. Weld all joints. Hinges to contain pre-greased nipples to increase function and durability. Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts. All hardware to be included. Supplier is responsible for loading/unloading and setup.

Product Images Image of latch for reference, gate image for reference. Lengths and number of horizontal bars vary – see

Specification Bid Item: 21

Product Name Swing Gate – 10’ L x 7’ H – with 7 Horizontal Bars – 2” Square Tube - Sheeted

Product Code

7-SGS10

Product Description Swing gate is 10' long X 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars sheeted -gate is sheeted 54” high from ground level with 12-gauge sheet metal

Purpose Animal enclosure for general livestock use. Enclosure to be designed to meet the requirements of ASCE-7 section

47.5 for guardrails (human).

Dimensions 10' long X 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars sheeted - gate is sheeted 54” high from ground level with 12-gauge sheet metal.

Weight 340 lbs.

Materials Gate - 2" x 2" x .125 hollow structural section square tube and 12-gauge sheet metal Hinges - 1.5" x .240 drawn over mandrel seamless pipe and 1" cold rolled shaft Latches - 5/16" grade 30 chain.

Additional Information Position bottom bar 10" from ground. Panel is sheeted from ground level to 54” high. Provide a 6" tall horizontal window from 32" to 38" height to step for handlers to scale the panels if needed. Weld all joints. Hinges to contain pre-greased nipples to increase function and durability. Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts. All hardware to be included. Supplier is responsible for loading/unloading and setup.

Product Images Image of latch for reference, gate image for reference. Lengths and number of horizontal bars vary – see

Specification Bid Item: 22

Product Name Swing Gate – 12’ L x 7’ H – with 7 Horizontal Bars – 2” Square Tube - Sheeted

Product Code

7-SGS12

Product Description 12' long X 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars sheeted - gate is sheeted 54” high from ground level with 12-gauge sheet metal

Purpose Animal enclosure for general livestock use. Enclosure to be designed to meet the requirements of ASCE-7 section

47.5 for guardrails (human).

Dimensions 12' long X 6'-2" tall (7'-0" tall when installed on screw piles SP10) with 7 horizontal bars sheeted - gate is sheeted 54” high from ground level with 12-gauge sheet metal

Weight 340 lbs.

Materials Gate - 2" x 2" x .125 hollow structural section square tube and 12-gauge sheet metal Hinges - 1.5" x .240 drawn over mandrel seamless pipe and 1" cold rolled shaft Latches - 5/16" grade 30 chain

Additional Information Position bottom bar 10" from ground. Panel is sheeted from ground level to 54” high. Provide a 6" tall horizontal window from 32" to 38" height to step for handlers to scale the panels if needed. Weld all joints. Hinges to contain grease nipples to increase function and durability. Attach each end of the panels to the CPMB's using 3/8" grade 5 bolts - All hardware to be included.