26Q7796_SALIENTS.pdf
PDF 146 KB Posted
- Attached to
- MANUAL LATHE
- Solicitation number
- SPMYM226Q7796
About this file
This document is a salient characteristics specification for a manual lathe machine tool. The lathe features a maximum footprint of 108.3" x 47.2" x 57.1" with a maximum weight of 3,747.7 lbs and a 59.0" turning length/center distance. The machine is equipped with a three-phase current drive providing 7 horsepower at 100% duty cycle, with a speed range of 44–2,000 RPM across 12 gear steps and maximum spindle torque of 663.2 foot-pounds. The lathe accommodates Z-axis feed rates from 0.0003–0.102 inches per revolution and X-axis feed rates from 0.001–0.050 inches per revolution, supporting metric thread cutting from 0.5–28 mm and inch thread cutting from 1–56 TPI with a maximum of 66 thread courses.
The lathe is supplied with comprehensive accessories and attachments, including three-jaw and independent four-jaw chucks (both 12" diameter), a 7-piece Aloris tool post with 6 tool holders, 5C and 16C collet chucks with complete collet sets, a D1-6 face plate, MT4 Jacobs chuck, and a taper turning attachment capable of accommodating tapers up to 13.8" with adjustable angles up to ±10 degrees. Additional features include a Newall digital readout for the 59" center distance, follower rest with sliding jaws, steady rest with roller jaws, live center MT4, and leveling plates with anchor screws and injection grout. The machine includes an IUID tag per MIL-STD-130 and NRTL certification, meeting federal identification and safety standards.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 26Q7796_EXHIBIT A- CDRL- MANUALS.pdf | ||
| 26Q7796_EXHIBIT B- CDRL- NRTL.pdf | ||
| 26Q7796_SITE REQUIREMENTS.pdf | ||
| 26Q7796_SPECIFICATION.pdf | ||
| 26Q7796_EXHIBIT C- CDRL- WARRANTY.pdf | ||
| SPMYM226Q7796.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Manual Lathe Salient Characteristics
• Maximum Footprint (WxDxH) :108.3” x 47.2” x 57.1"
• Max Machine Weight: 3747.7 lbs
• Turning Length/ Center Distance: 59.0”
• Height of Center: 8.3”
• Swing Over Bed: 17.1”
• Swing Over Cross Slide: 9.6”
• Travel of Cross Slide: 13.0”
• Travel of Top Slide: 5.1”
• Width of Bed: 13.0”
• Turing Tool (height x width): 1” x 1”
• Spindle nose: DIN 55029 D1-6
• Spindle Diameter in Front Bearing: 3.3”
• Spindle Bore: 2.0”
• Inside Taper of Main Spindle: 57
• Three phase current drive with 12 gear steps
• Drive Power at 100% duty cycle: 7HP
• Speed Range: 44 – 2000 RPM
• Number of Speeds: 12
• Max. Torque of Main Spindle at 100%: 663.2 FT-LB
• Z-axis feed rate: .0003-.102 IPR
• X-axis feed rate: .001-.050 IPR
• Metric Thread cutting range: .5-28 mm
• Inch Thread cutting range: 1-56 TPI
• Number of Thread Courses: 66 Max
• Tailstock Quill Diameter: 2.6”
• Tailstock Quill Travel 4.7”
• Inside Taper of Quill: 4MT
• Follower rest with sliding jaws
• Stead rest with roller jaws
• Quills with sliding jaws
• Live center MT4
• Levelling plates with anchor screws and injection grout
• Top slide with T-slot for Aloris tool holder
• Taper turning attachment for taper length up to 13.8”, adjusting angle + 10 Degrees
• Three-jaw self-centering chuck, diameter 12'' steel body. Each contains 1 set of hardened base and reversible top jaws, for spindle nose DIN 55029/6
• Independent four-jaw chuck, diameter 12" (300 mm) , cast iron. Each contains 1 set of
• one-piece reversible jaws, for spindle nose DIN 55029/6
• Aloris tool post 7 piece set with 6 tool holders
• D1-6 Face Plate
• MT4 Jacobs Chuck 0''-1/2''
• Sjogren 5C collet chuck
• 5C collet set 1/16 to 1 1/16 X32nds
• Sjogren 16C collet chuck
• 16C collet set 1/16 to 1 5/8 X 16ths 26 Each
• Newall Digital Readout for center distance 59"
• IUID Tag per MIL-STD-130
• NRTL Certification
File details come from the government source that posted it. Updated .