26-SIMACQ-D20-0005 _BPA Salient Characteristics.pdf

SALIENT CHARACTERISTICS

26-SIMACQ-D20-0005 BPA

Part Number Description 506519 10/100Base-TX to 100Base-FX (ST) Multi-Mode, 2 km (1.24 mi)

Standards

• IEEE 802.3 (Twisted Pair Ethernet)

• IEEE 802.3u (Twisted Pair/Fiber Optic Fast Ethernet)

General

• Media support:

- 100Base-TX Cat3 or higher UTP/STP RJ45, EIA/TIA 568

- 100Base-FX multi-mode 62.5/125 or 50/125 µm Fiber

• Connectors:

- One RJ45 port, 100Base-TX

- One Fiber ST duplex port, 100Base-FX

• Distances:

- 2 km / 1.24 mi (62.5/125 or 50/125 µm fiber cable)

- 100 m / 300 ft (RJ45 cable)

• Wavelength: 1310 nm

• Min. TX power: -15 dBm

• Max. TX power: -8 dBm

• RX sensitivity: -32 dBm

• Signal loss: 2 dB/km

• Certifications: FCC Class B, CE, UKCA, NDAA

LEDs

• Power

• LINK/ACT for RJ45 port

• LINK/ACT for Fiber ST port

• 100 Mbps link speed indicator for RJ45 port

• Optical signal input LED

• Full-/half duplex

Power

• External power adapter, 5 VDC, 1 A

• Power consumption: 3.0 watts (maximum)

Environmental

• Metal housing

• Dimensions: 107 (L) x 70 (W) x 26 (H) mm (4.2 x 2.8 x 1.0 in.)

• Weight: 180 g (0.4 lbs.)

• Operating temperature: 0 – 70°C (32 – 158°F)

• Operating humidity: 10 – 90% RH, non-condensing

• Storage temperature: -45 – 80°C (-49 – 176°F)

006R04685 Substitutions are not permitted.

Must be Genuine Xerox part designed for the Xerox C410 and Xerox VersaLink C415 (including C415DN) series printers.

• Color: Black

• Capacity/Yield: ~10,500 pages at 5% page coverage (ISO/IEC standard)

• Compatibility: Xerox C410, C410DN, VersaLink C415, C415DN

• Dimensions: Height 3.56 in, Length 7.28 in, Width 4.61 in, Weight 0.97 lb

• UPC: 095205039818

006R04686 Substitutions are not permitted.

Must be Genuine Xerox part designed for the Xerox C410 and Xerox VersaLink C415 (including C415DN) series printers.

• Color: Cyan

• Capacity/Yield: ~7,000 pages at 5% page coverage (ISO/IEC standard)

• Compatibility: Xerox C410, Xerox VersaLink C415, Xerox VersaLink C415DN

• Dimensions: Approx. 7.28 in (L) × 4.61 in (W) × 3.56 in (H)

• Weight: ~0.77 lb

• UPC: 095205039825

006R04687 Substitutions are not permitted.

Must be Genuine Xerox part designed for the Xerox C410 and Xerox VersaLink C415 (including C415DN) series printers.

• Color: Magenta

• Capacity/Yield: ~7,000 pages (high capacity, based on ISO/IEC testing at ~5% page coverage)

• Compatibility: Xerox C410, Xerox VersaLink C415, Xerox VersaLink C415DN

• Dimensions: 7.28" (L) × 4.61" (W) × 3.56" (H)

• Weight: ~0.77 lb (1 lb in some listings)

• UPC: 095205039832

006R04688 Substitutions are not permitted.

Must be Genuine Xerox part designed for the Xerox C410 and Xerox VersaLink C415 (including C415DN) series printers.

• Color: Yellow

• Capacity/Yield: ~7,000 pages (ISO/IEC standard, based on 5% page coverage;

actual yield depends on usage and coverage)

• Compatibility: Xerox C410, C410DN, VersaLink C415, C415DN

• Dimensions: Height 3.56 in, Length 7.28 in, Width 4.61 in

• Weight: 0.77 lb

• UPC: 095205039849

008R13325 Substitutions are not permitted.

Must be Genuine Xerox part designed for the Xerox C410 and Xerox VersaLink C415 (including C415DN) series printers.

• Capacity/Yield:

o Officially rated at 30,000 pages (some sources list ~25,000 pages based on average 5% page coverage).

o Designed to collect excess toner from the printer/copier, preventing waste and maintaining print quality.

• Compatibility:

o Works with Xerox C310, C315, C320, C325, C410, C410DN, VersaLink C415, and

C415DN.

• Design & Performance:

o Specially formulated and tested for optimal image quality and reliable printing page after page.

o Quick and easy to replace, minimizing downtime.

• Dimensions & Weight:

o Length: ~1.526 ft (18.1–18.31 in) o Width: ~7.56 in o Height: ~5.51 in o Weight: ~1.65 lb (2 lb including packaging).

• UPC Code: 095205068658.

10VV1 Substitutions are not permitted.

10A 250VAC Power Line Filter, 1.2mH Inductance, 813nF Capacitance Multi-purpose power line filter designed for AC applications, featuring a 10A current rating and a maximum AC voltage rating of 250V. This filter incorporates 1.2mH inductance and 813nF capacitance, with a leakage current of 500uA. It operates at 50Hz/60Hz and is suitable for chassis, flange, and panel mounting via quick connect terminations. The filter is UL approved, lead-free, RoHS compliant, and ELV compliant, with an operating temperature range of -10°C to 40°C.

Frequency50 Hz Current10A Capacitance813nF Current Rating10A

11938FB-A1J-EA-

Other known PNs that meet requirement:

11938FB-A1J-EA-

00_60Hz or

4715FS-12T-B10-

D00_60Hz

• Type: AC axial tubeaxial fan

• Series: 11938FB

• Frame: Square, 119 mm (L) × 119 mm (H) × 38 mm (W)

• Rated Voltage: 115 VAC, 60 Hz

• Airflow: 70 CFM (1.98 m³/min)

• Static Pressure: 0.120 in H₂O (29.9 Pa)

• Rated Speed: 1900 RPM

• Power Rating: 10 W

• Current Rating: 0.110 A

• Noise Level: 33 dB(A)

• Bearing Type: Ball bearing

• Motor Type: Shaded pole induction motor

• Frame Material: Aluminum alloy

• Blade Material: UL94V-O reinforced plastic

• Operating Temperature Range: -10 °C to +70 °C (non-condensing)

• Storage Temperature Range: -40 °C to +70 °C

• Expected Life: 100,000 hours at 25 °C

• Lead Wires: AWG 22, UL 3266, CSA CL 1252

• Terminals: Faston #110 or equivalent

• RoHS Compliance: Yes (RoHS 3 compliant)

• Weight: ~1.213 lbs (per Mouser data)

• Flange mount design with panel cut-outs for inlet/outlet airflow

• Counterclockwise rotation; air inlet over struts

• Suitable for general ventilation, cooling, and airflow control in industrial or commercial equipment.

15038PB-A1J-EA-

00_60Hz Other known PNs that meet requirement:

5915PC-12T-B10-

A00 or 5915PC- 12T-B10- A00_60Hz

• Frame size: 150 mm (W) × 172 mm (H) × 38 mm (D)

• Nominal voltage: 115 VAC

• Frequency: 60 Hz

• Airflow: 102.3 CFM (2.9 m³/min)

• Max static pressure: 0.243 in H₂O (60.7 Pa)

• Rated speed: 1650 RPM

• Noise level: 38 dBA

• Power rating: 18 W (0.19 A at 115 V)

• Bearing type: Ball bearing

• Life expectancy: 100,000 h (L₁₀) at 25 °C

• Mass: ~800 g (1.764 lbs)

• Ingress protection: None (open design)

• Starting voltage: 75 VAC

• IP rating: Not specified (no sealing)

• Blade type: Plastic (legacy part 5915PC)

3031-00948-42 1.0 MATERIAL

1.1 - FRAME SUBASSEMBLY, ALUM EXTRUSION 0.625 X 0.500, ALUM HONEYCOMB

0.500 THICK WITH

0.125 CELLS BUILD PER 77-0067-2005

1.2 - GASKET SUBASSEMBLY, NEO

SPONGE 0.090 THICK WITH PSA

BACKING, KNITTED FX WIRE

MESH 0.090 X 0.125, INDUSTRIAL

3M BROWN ADHESIVE, COMPRESSIONS STOPS

BUILD PER 77-0068-1140

GLUE MESH TO OUTSIDE OF GASKET

2.0 TOOLING

2.1 - DRILL FIXTURE --HASS MILL

2.2 - RULE DIE --FLASHCUT

3.0 FINISH

3.1 - TIN PLATE PER ASTM B-545, CLASS C

4.0 MARKING

4.1 - STAMP ON PART WHERE SHOWN

3031-00948-42

MAJR OPL74 & DATE COD

3031-00949-42 1.0 MATERIAL

1.1 - FRAME SUBASSEMBLY, ALUM

SHEET .06 TK ALUM

HONEYCOMB 0.250 THICK WITH

0.125 CELLS

BUILD PER 77-0067-2006-A BOX

77-0067-2006-B COVER

1.2 - GASKET SUBASSEMBLY,

MULTICON SILICON SOLID

WITH MONEL WIRES

.032" TK, COMPRESSION STOPS

BUILD PER 77-0068-1141

2.0 TOOLING

2.1 - DRILL FIXTURE --HASS MILL

2.2 - RULE DIE --FLASHCUT

3.0 FINISH

3.1 - TIN PLATE PER ASTM B-545 Class C

4.0 MARKING

4.1 - STAMP ON PART WHERE SHOWN

3031-00949-42

MAJR OPL74 & DATE CODE

3031-01018-57 1.0 MATERIAL

1.1 - FRAME SUBASSEMBLY, ALUM EXTRUSION 0.625 X 0.500, ALUM FILTER

MEDIA, 2X DIAMOND GRILL BUILD PER 77-0067-0696

1.2 - GASKET SUBASSEMBLY, NEO SPONGE 0.093 THICK WITH PSA BACKING,

KNITTED FX WIRE MESH 0.093 X 0.125, INDUSTRIAL 3M BROWN ADHESIVE,

COMPRESSIONS STOPS BUILD PER 77-0068-1194 GLUE MESH TO OUTSIDE OF

GASKET

2.0 TOOLING

2.1 - DRILL FIXTURE --HASS MILL

2.2 - FLASHCUT -77-0068-1194

3.0 FINISH

3.1 - PLATE YELLOW CHROMATE PER MIL-DTL-5541F PLATE PER 21-0003-3200

4.0 MARKING

4.1 - STAMP ON PART WHERE SHOWN

3031-01018-57

MAJR OPL74 & DATE CODE

3032-00407-42 1.0 MATERIAL

1.1 - FRAME SUBASSEMBLY, ALUM EXTRUSION 0.500 X 0.625 ALLOY 6063-T4

ALUMINUM ALLOY 5052 PER MIL-C-7438 0.500 THICK WITH 0.125 STRAIGHT CELLS,

ALUMINUM DIAMOND GRILL 0.054 THICK ALLOY 5005-H34 PER MIL-M-17999 B (MR)

CLASS II, BUILD PER MAJR # 77-0067-1817

1.2 - GASKET SUBASSEMBLY, NEOPRENE SPONGE 0.093 THICK WITH PSA

BACKING PER MIL-R-6130 TYPE 2 GRADE A, KNITTED FX WIRE MESH 0.093 X 0.125

PER ASTM B452 CLASS 40A AND ASTM B250 CLASS T40A, INDUCTRIAL 3M

ADHESIVE, COMPRESSION STOPS

BUILD PER MAJR # 77-0068-0990

1.3 – STAINLESS STEEL 18-8 HEX SOCKET HEAD CAPTIVE PANEL SCREW WITH 8-

32 THREAD 1.00 INCH LONG, MCMASTER-CARR PART 95966A341, MAJR # 22-0129-

2.0 TOOLING

2.1 - DRILL FIXTURE –NONE

USE MILL PROGRAM 77-0067-1817

OPEN RELEIF USING .221Ø ON DRILL PRESS

2.2 – RULE DIE 40782-1672-00001

2.3 – PUNCH FICTURE 40777-172-00001

3.0 FINISH

3.1 – TIN PLATING OVER ELECTROLESS NICKEL BASE PLATE PER ASTM B545,

CLASS C

4.0 MARKING

4.1 - STAMP ON PART WHERE SHOWN

3031-0407-42

MAJR OPL74 & DATE CODE

3032-00424-42 1.0 MATERIAL

1.1 - FRAME SUBASSEMBLY, ALUM EXTRUSION 0.625 X 0.500, ALUM

HONEYCOMB 0.500 THICK WITH 0.125 CELLS, 2X ALUM DIAMOND GRILL .051 THK

BUILD PER 77-0067-2007

1.2 - GASKET SUBASSEMBLY, NEO SPONGE 0.090 THICK WITH PSA

BACKING, KNITTED FX WIRE MESH 0.090 X 0.125, INDUSTRIAL

3M BROWN ADHESIVE, COMPRESSION STOPS

BUILD PER 77-0068-1142

GLUE MESH TO OUTSIDE OF GASKET

1.3 - CAPTIVE PANEL SCREWS 12 TOTAL

22-0129-0049 8-32

2.0 TOOLING

2.1 - DRILL FIXTURE --HASS MILL

2.2 - RULE DIE --FLASHCUT

3.0 FINISH

3.1 - TIN PLATE PER

ASTM B-545 CLASS C

4.0 MARKING

4.1 - STAMP ON PART WHERE SHOWN

3032-00424-42

MAJR 0PL74 & DATE CODE

71094 Other known PNs that meet requirement:

alt EB1 or 70102 or dwg 8749351

• All-in-one read and write solution for CDs, DVDs and Blu-ray discs*

• Compatible with BDXL discs - capacities up to 100GB

• Maximum write speeds of 6X for Blu-ray, 8X for DVD and 24X for CD

• Compact and lightweight for easy travel

• M DISC Ready - perfect archival solution with industry-leading disc lifetime expectancies

• Compatible with Windows and Mac OS

• USB 3.2 Gen 1 performance with USB 2.0 compatibility

• Includes USB Type-C® adapter

92100142 Other known PNs that meet requirement:

92100142H

• Type: Enclosed AC/DC Converter (offboard)

• Number of Outputs: 4

• Output Voltages:

1. 5 V (up to 50 A)

2. 3.3 V (up to 30 A)

3. 12 V (up to 10 A)

4. −12 V (up to 3 A)

• Total Output Power: ~500–505 W

• Input Voltage Range: 90 VAC to 264 VAC (universal input)

• Mounting Type: Rack mount (enclosed form factor)

• Applications: ITE (Industrial, Test, and Evaluation) and commercial systems

• Features:

• Hot swappable outputs

• Universal AC input

• No minimum load required

• CE, cULus, TUV approvals

• ROHS3 compliant, REACH unaffected

• Efficiency: Not specified in public specs

• Environmental Compliance: RoHS3, REACH, MSL 1 (unlimited) Variants

• 92100142: Standard enclosed rackmount model with 50 A, 30 A, 10 A, 3 A outputs.

• 92100142H: Frontend AC/DC converter variant with 50 A, 30 A, 15 A, 5 A outputs, load sharing, PFC, and Compact PCI® mounting.

ADS-15512 • OUTPUT NUMBER CH1 CH2

• DC VOLTAGE 12V 5V

• RATED CURRENT 11.5A 3A

• CURRENT RANGE 0 ~ 12.5A 0 ~ 3A

• RATED POWER 153W

• RIPPLE & NOISE (max.) Note.2 150mVp-p 100mVp-p

• VOLTAGE ADJ. RANGE CH1:10.8 ~ 13.2V

• VOLTAGE TOLERANCE Note.3 ±2.0% ±3.0%

• LINE REGULATION ±0.5% ±0.5%

• LOAD REGULATION ±1.0% ±2.0%

• SETUP, RISE TIME 1000ms, 90ms/230VAC 2000ms, 90ms/115VAC at full load

• HOLD UP TIME (Typ.) 24ms/230VAC 20ms/115VAC at full load

• VOLTAGE RANGE 88 ~ 264VAC 124 ~ 370VDC

• FREQUENCY RANGE 47 ~ 63Hz

• POWER FACTOR (Typ.) PF>0.92

• EFFICIENCY (Typ.) 77%

• AC CURRENT (Typ.) 2.5A/115VAC 1.5A/230VAC

• INRUSH CURRENT (Typ.) COLD START 23A/115VAC 45A/230VAC

• LEAKAGE CURRENT <1mA / 240VAC

• OVERLOAD 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is reoved

• OVER VOLTAGE CH1:13.8 ~ 16.2V

Protection type : Shut down o/p voltage, re-power on to recover

• WORKING TEMP. -10 ~ +60℃ (Refer to "Derating Curve")

• WORKING HUMIDITY 20 ~ 90% RH non-condensing

• STORAGE TEMP., HUMIDITY -20 ~ +85℃, 10 ~ 95% RH

• TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 50℃)

• VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

• SAFETY STANDARDS UL62368-1, TUV BS EN/EN62368-1, EAC TP TC

004 approved

• WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2.0KVAC O/P-

FG:0.5KVAC

• ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC /

25℃/ 70% RH

• EMC EMISSION Compliance to BS EN/EN55032 (CISPR32) Class B, BS

EN/EN61000-3-2,-3, EAC TP TC 020

• EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, light industry level, EAC TP TC 020

• MTBF 2235.6K hrs min. Telcordia SR-332 (Bellcore) ; 252.1K hrs min.

MIL-HDBK-217F (25℃)

• DIMENSION 199*110*50mm (L*W*H)

• PACKING 1Kg; 16pcs/16Kg/0.95CUFT

AFL3-S500 • Capacity: 500 GB (also available in HDD and higher SSD capacities).

• Encryption: Real-time 256bit AESXTS hardware based encryption, FIPS 1402 Level 3 validated for NIST compliance.

• Security: Integrated 10digit PIN keypad for onboard authentication.

o Forced enrollment to prevent unauthorized use.

o Autolock after unattended periods.

o Bruteforce defense with self destruct after multiple failed PIN attempts.

o Admin/User modes and drive reset feature.

• Performance: Up to 5 Gb/s data transfer over USB 3.1 Gen 1; some specs list up to 370 MB/s read/write speeds.

• Durability: Aircraft grade 6061 aluminum alloy enclosure, shock/vibration resistant, operating temperature range 40 °C to +70 °C.

• Connectivity: USB 3.1 Gen 1 (USB 3.2 Gen 1 equivalent) with TypeA and TypeC cables included.

• Compatibility: Cross platform (Windows, Mac, Linux, Android, Chrome) and works in environments without a keyboard.

• Design: Compact, wear resistant keypad, IP certification pending.

• Other: 8 MB buffer, 0.1 ms access time, TAA compliant.

BASE-WIRED

that meet requirement:

Base 5

• Onboard temperature sensor.

• - Built-in web server.

• - Alerting via email, voice call or SMS.

• - Industrial protcols: SNMP and Modbus TCP

• - Web API protocols: JSON and XML.

• - DHCP or static IP.

• - PoE built-in, optional AC adapter or USB power adapters.

• - Ultra low power usage (< 0.5W).

• - Runs locally

• - no Internet connectivity required to operate.

• - Stand-alone device: no software needed.

• - Fully responsive web interface for desktop, tablet or smart phone.

• - User configurable firewall for enhanced security.

• - Industrial grade: UL Listed, FCC and CE certified.

• TCP/IP: IPv4 at 10/100 Mbps.

• Power Source: PoE: IEEE 802.3af or BASE-PWR (Optional AC power adapter) or BASE-PWR-USB (USB power adapter)

• Power Usage: 1500mW (without sensors attached).

• Network Data Transfer SNMP GET (50 - 130 bytes) , SNMP Trap (143 - 280 bytes)

• Built-in: web server, SNMP v1, v2 & v3 (MD5/AES), Modbus TCP.

• Built-in alerting options: Email, SMS (over IP) & SNMP Traps.

• External sensors probes: 2 sensor probes through straight RJ45 CAT6/7 cable with max distance of 100m or 330ft

• (subject to cable quality and interference).

• Max distance to switch: CAT6/CAT7 up to 100m / 300ft

• Temperature Resolution: 0.1°C / 0.18°F

• Temperature Reading: "-55°C to +125°C (-67°F to +257°F) / SensorGateway operates up to 75C / 167°F

• Temperature Accuracy: +/- 1°C (+/- 2°F) over 0°C to +75°C / 32°F to 167°F.

• Operating temperature range 0°C to +75°C (+167°F).

• Humidity (operating and storage) –

• < 90% rH (non-condensating).

• Dimensions 70 mm (2.7") x 88 mm (3.4") x 22 mm (0.8").

• Weight 0.21 kg ( 0.46 lbs.)

BU40N • Ultra Slim Blue-ray/DVD Writer

• M-DISC™ SUPPORT

• MAX 8X DVD±R WRITE SPEED

• TV Connectivity

• WINDOWS 10 COMPATIBLE

• Transfer Rates Read (MAX) o BD-R (SL/DL) 6x CAV o DVD-ROM (SL/DL) 8x CAV o BDMV (AACS Compliant Disc) (SL/DL) 6x CAV o DVD-RAM 2x, 3x CLV, 5x PCASV o DVD+RW 8x CAV o CD-DA 24x CAV o BD-R (SL/LTH) 6x CAV o CD-R/RW/ROM 24x / 24x / 24x CAV o BD-R (TL/QL) 6x CAV o DVD +R (SL/DL) 8x CAV o BD-RE (SL/DL) 6x CAV o BD-RE (TL) 4x PCAV o DVD-Video (CSS Compliant Disc)(SL/DL) 8x CAV o BD-ROM (SL/DL) 6x CAV

• Transfer Rates Write (MAX) o BD-R (SL) 2x CLV, 4x PCAV, 6x CAV o M-DISC BD (BD-R) 2x CLV, 4x PCAV o BD-R (LTH) 2x CLV, 4x PCAV, 6x CAV o DVD+R (DL) 2.4x CLV, 6x ZCLV o BD-R (QL) 2x CLV, 4x PCAV o M-DISC DVD (DVD+R) 4x PCAV o DVD-RAM 2x, 3x CLV, 5x PCAV o DVD+R (SL) 2.4x CLV, 4x PCAV, 8x CAV o BD-R (TL) 2x CLV, 4x PCAV o CD-RW 4x, 10x CLV, 16x ZCLV o BD-R (DL) 2x CLV, 4x PCAV, 6x CAV o CD-R 10x CLV, 16x PCAV, 24x CAV o DVD+RW 2.4x, 3.3x CLV, 4x, 6x, 8x ZCLV o BD-RE (SL/DL/TL) 2x CLV

• Sustained Transfer Rate o BD-ROM 26.97 MB/s (6x) max.

o CD-ROM 3.6 MB/s (24x) max.

o DVD-ROM 11.08 MB/s (6x) max.

• Access Time (1/3 Stroke) o DVD-ROM 200ms typ.

o CD-ROM 200ms typ.

o BD-ROM 250ms typ.

• Buffer Size 4MB Buffer Under-run prevention function embedded

• Compliance o RoHS – Yes o TUV EN 60950-1 / EN60825-1 o SEMKO EN 60950-1 / EN60825-1 o Laser Safety - Class 1 laser product comply with DHHS rules 21 CFR

Subchapter J Class 1 laser product to EN60825-1 / IEC 60825-1 o EMC - CE Marking, C-Tick Mark, BSMI, FCCI, KC, CU, FCC Part 15

Class B Digital Device, ICES-003 Digital Apparantus o C-UL CSA C222 No. 60950-1 Second Edition o Safety UL UL 60950-1 Second Edition

• Jamless Play

• Silent Play

• Host Interfact – Internal (Drive) SATA

• Operating Systems - Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows XP

C410/YDN

Print speed - Color: up to 42 ppm Black: up to 42 ppm Two-sided output - Standard Monthly print volume - Up to 10,000 pages Duty cycle - Up to 125,000 images/month Processor speed - 1.0 GHz Print memory (standard) - 1000 MB standard Connectivity - Gigabit Ethernet, Hi Speed USB 2.0 (Type A), Hi Speed USB 2.0 (Type B) (optional: Wireless Network Adapter (802.11 b/g/n/ac)) Maximum print resolution - 1200 x 1200 dpi, 4800 Color Quality First-page-out time, printing - As fast as 6.1 seconds black and white / 6.4 seconds color

Page Description Languages (PDL) - Direct Image, PCL® 5 Emulation, PCL® 6 Emulation, PDF v1.7 Emulation, PostScript® 3 Emulation

Print features - Booklet Layout, Collation, Draft Mode, Duplex, Earth Smart Settings, N-up, Normal, One Touch UI, Orientation, Print Job ID in Margins, Print Quality, Rotate Image 180 Degrees, Saved Settings, Saved and Sample Set Job Types, Secure, Tray and Toner Status, Watermark

OS support - Microsoft Universal Print, Windows Server 2012, Windows Server 2012 R2, Windows Server 2019, Windows Server 2022, Windows® 10, Windows® 11, macOS 11.x, macOS 12.x, macOS 13.x

Paper capacity

Tray (Main tray): 250 sheets Tray (Manual feed slot): 1 sheets Tray (Multipurpose Feeder) (optional): 100 sheets Tray (550-sheet Feeder) (optional): 550 sheets

Paper size

Tray (Main tray): Custom sizes: 3.8 x 5.8 in. to 8.5 x 14 in. (98 x 148 mm to 216 x 356 mm) Tray (Manual feed slot): Custom sizes: 3 x 5 in. to 8.5 x 14 in. (76 x 127 mm to 216 x 356 mm) Tray (Multipurpose Feeder) (optional): Custom sizes: 3 x 5 in. to 8.5 x 14 in. (76 x 127 mm to 216 x 356 mm) Tray (550-sheet Feeder) (optional): Custom sizes: 5.83 x 8.27 in. to 8.5 x 14 in. (148 x 210 mm to 216 x 356 mm)

Output capacity - 125 sheets

Media types - Plain Paper, Light Paper, Heavy Paper, Card Stock, Labels (Paper Labels), Envelopes, Colored Paper, Letterhead, Preprinted, Bond, Glossy, Rough/Cotton, Recycled

Security features - Access Controls, Certificate Management, Confidential Print, Digitally Signed Firmware Updates, FIPS 140-2, Image Overwrite, Non-Volatile Memory Wipe, Port Filtering, Protected USB Ports, Secure Password Reset, TCP Connection Filtering, TLS 1.3, Trusted Platform Module (TPM), WPA3 Support

Minimum dimensions (WxDxH) - 17.9 x 16.6 x 12.5 in. (455 x 423 x 318 mm)

Weight - 45.3 lb (20.6 kg)

Temperature (operating) 50 - 90 ° F (10 - 32 ° C)

Relative humidity (operating) 20 - 80 % RH (noncondensing)

CCG012 • Rugged, locking pin headers

• COM Express® Type 6 compatibility

• Mini-PCIe Expansion, USB 2.0, DisplayPort++

• Small size, 95mm x 125mm

• Supports latest Intel® processor sets

• Extended Temperature Range -40°C to +85°C

• Connect Tech’s COM Express® Type 6 Rugged Ultra Lite Carrier Board is a compact carrier board which matches the dimensions of a COM Express® Basic module and offers the ultimate durability with locking, rugged pin headers.

• COM Express® Type 6 Rugged Ultra Lite Carrier Board is ideal for space constrained applications, harsh environments, demanding conditions and supports extended temperature ranges of -40°C to +85°C.

Specifications

• Compatibility: COM Express® Type 6, PCIMG COM Express® COM.0 R2.0

• Mini PCIe/mSATA : 1x SIM Card Expansion, 2 slots (with PCIe, USB and SATA connections)

• Storage : 2x External Vertical Locking SATA Connector, 2x mSATA

• Network : 2x Gigabit (10/100/1000) Ports

• GPIO : 8-bit GPIO

• USB : 8x USB 2.0

• Display : 1 x LVDS interface (single ch 24-bit, dual ch 48-bit), 1x VGA, 2x DDI

• Audio : HD Audio (Cirrus Logic CS4207 codec), 1x stereo input, 1x stereo output

• Serial : 1x Console RS -232 port (TX/RX), 2x RS-232, 2x RS-422/485

• Misc : Battery Low Indication, I2C, PC speaker Interface, SMBus, System Status (S3 and Reset Outputs)

• Power Requirements : Input: Single +12V input +/- 5% (5mm pitch terminal connector), On-board RTC Battery 3V 48mAh (with option to select from RTC external battery)

• I/O Connector Type : All low-profile shrouded locking ruggedized 2mm pitch headers, Can be mated to panel mountable cable set or MIL type connectors

• Operating Temperature : -40°C to +85°C (-40°F to +185°F)

• Dimensions : 125mm x 95mm

CD03-GTS-14VDC Overall Length: 1.140 MAX Lens length: .265 Pin length: .203 Voltage: 14-volt direct current system Lens – high strength plastic Housing - Anodized Aluminum Header – High dielectric molded nylon Lens color – Green translucent Lens type – short flat lens design Finish - Silver

CD03-GTS-6VDC Overall Length: 1.140 MAX Lens length: .265 Pin length: .203 Voltage: 6-volt direct current system

Lens – high strength plastic Housing - Anodized Aluminum Header – High dielectric molded nylon Lens color – Green translucent Lens type – short flat lens design Finish - Silver

CD03-RTS-14VDC Overall Length: 1.140 MAX Lens length: .265 Pin length: .203 Voltage: 14-volt direct current system Lens – high strength plastic Housing - Anodized Aluminum Header – High dielectric molded nylon Lens color – Red translucent Lens type – short flat lens design Finish - Silver

CR2032 The CR2032 is a lithium/manganese dioxide coin cell designed for long-life, reliable power in small devices.

Key Features

• High capacity & energy: Industry-leading cell capacity for its size, with nominal capacities around 245–265 mAh and ~735–745 mWh.

• High voltage response: Stable output voltage over most of its lifetime.

• Low self-discharge: <1–2% loss after 1 year at +20 °C.

• Excellent corrosion resistance.

• Child-safe design: Non-toxic bitter coating on both terminals and child-resistant packaging.

• Compliance: Meets IEC 60086-4, UN 38.3, REACH, ISO 9001, and Duracell World Class Continuous Program standards.

• Durability: Passes rigorous safety tests (altitude, thermal cycling, vibration, shock, crush, etc.).

Electrical Characteristics

• Nominal voltage: 3.0 V (open circuit ~3.2 V at +20 °C).

• Nominal capacity: ~245–265 mAh (15 kΩ continuous load, 2.0 V cut-off).

• Standard continuous discharge: 0.3–0.5 mA.

• Max continuous discharge: 3–6 mA.

• Max pulse discharge (1 s): 50–20 mA.

• Nominal energy: ~735–745 mWh.

• AC impedance @ 1 kHz: ~11–20 Ω.

Physical Characteristics

• Dimensions: 20.0 mm diameter × 19.7 mm height (IEC/ANSI).

• Typical weight: ~2.8–3.14 g.

• Li metal content: ~0.06–0.07 g.

• Case: Ni-plated stainless steel.

Operating & Storage Conditions

• Operating temperature range: -20 °C to +60 °C (some datasheets list -30 °C to +70 °C).

• Storage temperature: 5 °C to 30 °C (41 °F to 86 °F).

• Storage humidity: <70% (optimal).

• Durability: Guaranteed for 10 years in storage.

D15B • Design & Mounting:

o Specifically engineered for DHN or DHO holders (rear mounting, 3/8" hole).

o Matches the terminal pin position of standard C-lite lens marking orientation.

o Available in multiple terminal styles: turret pin, solder cup, and solder lug.

• Compatibility:

o Securely retains CF, CG, or CR series C-lite cartridges.

o Works with CD–LED lamps in the same holder configuration.

o Part of a complete assembly with the lampholder; the collar can be removed and replaced.

• Material & Construction:

o Anodized aluminum bushings for the lampholder base.

o High-temperature plastic lens caps (when paired) for durability and heat resistance.

• Lens Cap Pairing:

o The D15 collar is paired with a lens cap (e.g., D06, D07, D09) depending on the C-lite style and lens clarity requirements.

o Lens caps are designed to rotate for alignment of lens markings after installation.

• Military & Standards:

o Eldema D-series parts meet MIL-L-3661 specifications for certain lens cap types.

o D15B is part of a military-grade lighting system (FSC 6240, CAGE Code 1EPT9).

DIG-SSD220006-

SI

Other known PNs that meet requirement:

8749355

• Security Certification:

o FIPS 140-2 Level 2 cryptographic module o Compliant with TCG OPAL SSC protocol for self-encrypting drives o Supports AES-256 hardware-level encryption/decryption at the NAND flash level o Meets stringent physical security, firmware integrity, and cryptographic requirements

• Form Factors & Interfaces:

o Available in 2.5" SATA and M.2 SATA/PCIe Gen 3x4 NVMe configurations o SATA III interface up to 6 Gbps

• Encryption & Authentication:

o On-the-fly AES encryption/decryption for all stored data o Supports pre-boot authentication (PBA) and multifactor authentication for secure

OS/VM boot o Compatible with CAC/PIV/CIV tokens and USB/YubiKey authentication

• Performance:

o SATA: Read up to 550 MB/s, Write up to 530 MB/s o NVMe: Read up to 3,400 MB/s, Write up to 3,100 MB/s o High sustained throughput for commercial workloads

• Reliability & Durability:

o Advanced flash management (wear leveling, bad block management, TRIM) o MTBF > 1,600,000 hours

• Compliance & Standards:

o TAA-compliant for U.S. government use o RoHS, FCC, UL, CE compliant o Meets federal cybersecurity requirements for data at rest

• Temperature Range:

o Operation: 0°C to 70°C o Storage: -40°C to 85°C

DZ300-1EC Input Voltage………………...…...90VAC to 264VAC Input Frequency………………………..47Hz to 63Hz Power Factor…………………………………..…>0.95 Inrush Current (cold)…………...……Less than 30A at 110VAC or 60A at 220VAC cold start, 25°C Operating Temperature……………..………..0 to 70ºC De-rated 2.5%/°C >50°C Storage Temperature…………..……….−20ºC to 85ºC Cooling……………...…Free Air Convection for 300W 18CFM for 360W Efficiency………………………….…..80-90% Typical Holdup Time…………………………………….>20ms Overvoltage Type……………………………Latch off Overload Protection……...………...…..Auto recovery Short Circuit Protection…………….…..Auto recovery Designed in full compliance with…….…...UL 60950 1 CSA 22.2 #234

TUV EN60950 1

EMI………………...…………FCC “B” EN55022 “B”

Harmonics………...…………….EN61000 3 2 class D

EMS…………………...EN61000-4 -2, -3, -4, -5, -6, -8, -11

OUTPUT SPECS

WATTS: 300

1) Voltage (Vdc): +5V / Load (A): Min. = 0, Rate = 32, Peak: 45 / Tolerance: 1% / Ripple

& Noise: 50mV / Regulation: Line: +/-1%, Load +/-1%

2) Voltage (Vdc): +12V / Load (A): Min. = 0, Rate = 10, Peak: 14 / Tolerance: 5% / Ripple

& Noise: 100mV / Regulation: Line: +/-1%, Load +/-1%

3) Voltage (Vdc): -12V / Load (A): Min. = 0, Rate = 1, Peak: 2 / Tolerance: 5% / Ripple &

Noise: 100mV / Regulation: Line: +/-1%, Load +/-1%

ENV-TEMP General Description Key Features

- Plugs into the base unit (BASE-WIRED).

- Powered by the base unit (BASE-WIRED).

- Compact plug & play sensor.

- 0U rack or wall mountable.

- Steel enclosure. Industrial Grade.

- Alerts via SNMP Traps, email, SMS or voice calls.

- optional calibration certificates available.

Technical Specifications Our basic temperature sensor to monitor your critical facility Power Source: SensorGateway (BASE-WIRED) Power Usage 60 mW Temperature Resolution: 0.1°C (0.18)°F precision Temperature Accuracy: +/- 0.5ºC (+/- 0.9 ºF) from -10°C to +85°C / 14°F to 185°F Temperature Reading: -55°C to +125°C (-67ºF to +257ºF) Reading Unit in Celsius or Fahrenheit Operating temperature range 0°C to +75°C (32°F to +167°F) Humidity (operating and storage) < 90% rH (non-condensating).

Dimensions 74 mm (2.9") x 66 mm (2.59") x 22 mm (0.8") Weight 0.12kg (0.26 lbs.)

FA10250 AMETEK RUGGED UPS FA10250 — Salient Characteristics 3000 VA, 2700 W, 115 VAC at 60 Hz input and 115 VAC at 60 Hz output, double conversion, rugged, high temperature, isolated, on-line UPS with hot swap battery drawer, with power factor correction for Navy shipboard applications.

Key Specifications & Features:

• Technology: On line (double conversion) UPS — provides continuous power transfer without transfer time

• Battery Configuration: Hot swap lead acid battery drawer for maintenance without downtime

• Battery Chemistry: Lead (Pb) acid

• Chassis: 2U rackmount for space efficient installation

• Environmental Rating: Rugged, high temperature operation suitable for harsh marine environments

• Isolation: Fully isolated output for safety and noise reduction

• Power Factor Correction: Integrated to improve efficiency and reduce harmonic distortion

TYPE SPECIFICATION

Power Rating 2700-6000 Watts Chassis Configuration 2U Rackmount Input Voltage 115 VAC Output Voltage 115 VAC Input Connector Circular Mil Output Connector Circular Mil

Communication SNMP Summary:

The FA10250 is a compact, rugged, and high temperature rated UPS with hot swap battery capability, making it ideal for mission critical applications where continuous, clean power is essential and environmental conditions are severe. Its double conversion design ensures minimal transfer time and high reliability, while its integrated power factor correction enhances efficiency.

FB00031 FEATURES AND BENEFITS

Rugged & Extreme Environments All Intelli Power systems utilize circuit boards, chassis and components that are specifically designed for extreme environments. In today’s marketplace, repackaged commercial products are often billed as “rugged” and/or “built for harsh environments”. Each component in our systems is specifically selected or designed based upon proven performance in harsh indoor and outdoor applications.

Cutting Edge Technology Our digital double conversion on-line UPS, power conditioner and frequency/voltage converter solutions utilize high-efficiency power switching and galvanic isolation which provides ideal electrical output performance.

Systems are available with global voltage inputs & outputs, AC inputs & outputs, and DC inputs & outputs. You will be able to utilize any power source.

Intelli Power offers power management software along with many standard communications protocols such as SNMP with OID and MIB Support, RS-232, Ethernet/IP – Common Industrial Protocol (CIP), MODBUS and Dry/Discrete Contacts. The sum total of these technological features equals the ultimate protection for your electronic equipment.

Robust Product Portfolio No other UPS company offers 2,000+ variations. Utilizing Intelli Power’s building block methodology, more product features and functionality are provided; without having to extend lead times or change proven designs.

Over the past 25 years, Intelli Power has developed its electronics hardware, firmware, embedded software and enclosure technology in house, which provides us with a unique capability to meet virtually any of your application requirements to include completely sealed systems.

Designed and Manufactured in the USA The engineering and technological expertise within Intelli Power has enabled us to develop and field test products since 1988 to 100% user satisfaction. For you, this translates into shorter lead times from design to shipping as well as personalized service and support. Our mission is to provide you with the highest standard of customer support and quality control.

ISO 9001: 2008 Certified Intelli Power is committed to customer satisfaction by delivering power system solutions and services that meet or exceed customer requirements through design innovation and continuous improvement.

Enclosure Type: Hot Swap drawer Enclosure Dimensions: 3.2”H x 8.48”W x 18.2”D Enclosure Material and Finish: steel, powder coated charcoal gray Connector(s) EBP Group 1: 1 Straight Pin Domino self aligning Battery Type: 12V/5.2Ah Lead-Acid (VRLA), Battery P/N: CSB12580 Battery Quantity Total: 8 Battery Strings Quantity Total: 1 Battery Voltage per String: 96 VDC Battery Runtime: 5 Minutes @ 2700 Watts Battery Mounting: Hot Swap Drawer Weight 38 Lbs (17.2Kg)

Temperature Operating: -15C to +50C Humidity: 5 to 95% non-condensing

FOI-4411-R-ST Overview Used in pairs, the FOI-4141 (to DCE) and FOI-4411 (to DTE) provide end-to-end conversion, extension and electrical isolation of RS-232 circuits up to a maximum data rate of 1Mbps. Multimode optics extends the distance to 2km, while single mode optics extends the distance to 20km.

These units are transparent to all handshaking protocols and accept data and clock signals. A regeneration switch on the FOI-4141 allows users to toggle between synchronous applications that require send timing (ST) and asynchronous or synchronous applications that require terminal timing (TT).

The units support tail circuit and null modem functions for DCE to DCE or DTE to DTE communications. An alternate interface (V.35 or RS-422) may be installed at the opposite end, allowing the user to create a link between two electrically incompatible interfaces without requiring a separate interface converter.

The units can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Patton recommends “T” units for high security applications because they have been TEMPEST tested and approved.

FOI units can be mounted in several redundant powering chassis; rack and wall mount options including Tempe stand NEMA alternatives.

Features Serial Data to Fiber supporting TIA/EIA -232, -423, -694,-723 and MIL-STD-188C Supports Data Rates from DC to 1 Mbps Multimode extension of up to 1.2 miles (2 km) Single mode extension up to 12.4 miles (20 km) Tail circuit and null modem functions for DCE to DCE or DTE to DTE Can be paired with other FOI with V.35 or RS-422interfaces for interface conversion Rugged metal enclosures with RFI shielding

FOI-4451-R-ST Overview Used in pairs, the FOI-4451 (to DCE) and FOI-4541 (to DTE) Serial to Fiber Converters provide end-to-end conversion, extension, and electrical isolation of EIA-530/RS- 422circuits. Multimode optics extends the distance to 2km, while single mode optics extends the distance to 20km. TheFOI-4451 and FOI-4541 both provide complete electrical isolation for RS- 422 communications. The units can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Privacy of communications is also enhanced because the fiber optic cable does not radiate any emissions. Patton recommends “T” units for high security applications because they have been TEMPEST tested and approved.

The Serial to Fiber Converters are transparent to all hand shaking protocols and can accept data and clock signals up to 6.144 Mbps. A regeneration switch on the FOI-4451 enables users to toggle between synchronous applications that require send timing (ST), and asynchronous or synchronous applications that require terminal timing (TT). They support tail circuit and null modem functions for DCE to DCE or DTE to DTE communications. An alternate interface (V.35 or RS-232) may be installed at the opposite end creating isolated interface converter.

Applications A typical link consists of an FOI-4451 at the Data Communication Equipment (to DCE) and an FOI-4541 at the Data Terminal Equipment (to DTE) with a duplex fiber optic cable between them.

Features

• Extends and Isolated EIA-530/RS-422 (MIL-STD-188-114Aand FED STD 1030A) Serial Data Over Fiber

• Multimode extension of up to 1.2 miles (2 km), single mode extension up to 12.4 miles (20 km)

• Single mode extension up to 12.4 miles (20 km)

• Separate unit for DCE and DTE: FOI-4451 (to DCE) andFOI-4541 (to DTE)

• Supports Data Rate from DC to 6.144 Mbps

• Tail circuit and null modem functions for DCE to DCE or DTE to DTE

• Pairs with other FOI with V.35 or RS-232 interfaces for interface conversion

FSP500-50FDB Certified CB 62368-1 & CB 60950-1 Meet 80 Plus Gold Design for 5,000 Meter above sea level High Reliability Low Ripple & Noise Over Current Protection Over Temperature Protection Over Voltage Protection

DESCRIPTION

FSP500-

SAFETY STANDARD APPROVAL

GENERAL SPECIFICATIONS

• Dimension (L x W x H): 150 x 81.5 x40.5(mm)

• Environment 5.9x 3.21 x 1.59 (inch)

• Working temperature: 0°Cto 50°C

• Storage temperature: -20°C to + 80°C

• Efficiency: 80 Plus Gold

• Working humidity: 90% RH non-condensing

• Storage humidity: 90% RHnon-condensing

• Hold-uptime: 115V / 60Hz: ≥16ms 230V / 50Hz:≥16ms

• MTBF: 100,000 hours of continuous operation at 25°C, Max,-output load

• Operating altitude: 5,000 meters above sealevel

• Applications: Workstation ,Storage System ,IPC Controller

INPUTSPECIFICATIONS

Input voltage: 90-264Vac Input frequency: 47-63Hz Input current: 115Vac @ 6A, 230Vac @ 3A

I226-T1 Intel® Ethernet Network Adapter I226-T1 — Key Characteristics The Intel® Ethernet Network Adapter I226-T1 is a PCIe 3.1 x1 ultra compact Ethernet adapter designed for performance PCs, workstations, and enterprise, gaming, and home networks that need bandwidth beyond 1 GbE .

Core Specifications & Features

• Interface: PCIe 3.1 x1, 5 GT/s bandwidth

• Speeds: Supports 2.5 GbE, 1 GbE, 100 MbE, and 10 MbE without changing cabling

• Port: Single RJ 45 port, compatible with CAT5e, CAT6, or CAT6A cables up to 100 m

• Auto negotiation: IEEE 802.3 auto negotiation for speed, duplex, and flow control

• Flow Control: IEEE 802.3x/802.3z compliant, with software controllable Rx thresholds and Tx pause frames

• Packet Handling: 4 Tx/Rx queues per device for efficient prioritization and load balancing in multi core systems

• Checksum Offload: Supports IP, SCTP, TCP, and UDP checksum offload (IPv4/IPv6) to reduce CPU load

• Power Management:

• Active State Power Management (ASPM) with compliance bit

• Full wake on LAN (APM)

• ACPI v2.0c support, D0/D3 states, and power managed speed control

• Design: Ultra compact footprint, ventilated bracket for efficiency and reduced power consumption

• Environmental Compliance: Lead free, low halogen, environmentally friendly Performance & Use Cases

• Optimized for low CPU overhead via advanced interrupt handling and intelligent packet routing

• Suitable for online gaming, remote work, and high bandwidth applications due to stable, low latency connectivity

• Easy integration into existing systems without cabling upgrades Summary: The I226 T1 is a cost effective, low power, single port 2.5 GbE adapter ideal for systems needing more than 1 GbE but not requiring 10 GbE. It offers flexibility, efficiency, and plug and play compatibility across multiple operating systems.

Cable Medium: Copper Cabling Type: CAT5e, CAT6, CAT6A Bracket Height: Low profile and full height Networking Specifications Port Configuration: Single Data Rate Per Port: 10/100/1000/2.5GBASE-T(TX) Speed & Slot Width: 5 GT/s, x1 Lane Controller: Intel(R) Ethernet Controller I226 Package Specifications System Interface Type: PCIe 3.1 (5 GT/s)

KSM24RD4/32M

EI

Other known PNs that meet requirement:

ML19200-

324K01-G)

32GB (1X32GB) 1.2V DDR4 2400MHZ PC4-19200 LRDIMM 2RX4

SKU: ML19200-324K01-G

Size: 32GB (1X32GB) Voltage: 1.2V Technical Specifications Module Density: 32GB Form Factor: LRDIMM Technology Speed: DDR4 2400MHz PC4-19200 Rank: 2Rx4 Voltage: 1.2V

ECC: ECC

Buffered: Buffered Description NEMIX RAM DDR4 2400MHZ PC4-19200 LRDIMM 2RX4 are manufactured using JEDEC standard 7-layer PCB Board built with Tier 1 chipset such as Samsung Micron or Hynix

DRAM.

KV2004A Black Box KV2004A — Salient Characteristics The Black Box KV2004A is a 4 port Wizard Desktop KVM switch designed for high end video and peripheral sharing between multiple computers.

Key salient features:

• High end video support: Switches up to four computers that support DVI I video, USB keyboard/mouse, and analog audio.

• Resolution support:

• DVI D: up to 2560×1600 @ 60 Hz (or 2048×2048 @ 60 Hz)

• VGA: up to 1920×1200.

• USB True Emulation: Passes the full characteristics of connected USB peripherals (including keyboards and mice) to each system, avoiding limitations of traditional emulations. This enables instantaneous switching and hotkey support.

• Peripheral sharing: Shares any four USB peripherals (e.g., keyboards, mice, USB drives) among the four systems.

• Audio switching: Supports stereo audio that can be switched independently from the video signal.

• Switching methods:

• Front push buttons

• Keyboard/mouse hotkeys

• RS 232/V.24 protocol

• Synchronous switching with other ServSwitch Wizard units via the options port.

• True DDC/EDID support: Ensures correct display mode detection and configuration.

• USB 2.0 transparency: Combines transparent USB 2.0 protocol with emulated keyboard/mouse control, plus dedicated USB ports for other peripherals.

• No OSD switching: Does not support On Screen Display switching.

• No video format conversion: Maintains the native video format of each connected system.

• Operating temperature: 32 °F to 122 °F (0 °C to 50 °C).

Wizard KVM Switch - Single-Monitor, DVI-D Dual-Link, USB True Emulation, Audio, 4-Port Share high-end video and any four USB peripherals between up to four workstations.

KVM Switch - Single-Monitor, DVI-D Dual-Link, USB True Emulation, Audio, 4-Port Summary: The KV2004A is a high performance KVM switch ideal for environments needing fast, reliable switching between multiple high resolution displays and USB devices, with true USB emulation for full peripheral recognition and hotkey functionality.

• Enables to switch up to four computers

• Access up to four computers that support DVI-I video, USB keyboard and mouse, and analog audio

• Switch ports using front push buttons, mouse, and keyboard hotkeys

• Support for DVI resolutions up to 2560x1600 at 60Hz. and VGA resolutions up to 1920x1200

• True DDC EDID support

• Supports dual-link DVI-D, single-link DVI-D, and VGA

• Switched synchronously with other ServSwitch Wizard switches via the options port

• Stereo audio switches independently from the video signal General Power External: 100-240 VAC/5VDC 2.5A Video DVI-dual link: 2560 x 1600 at 60 Hz; DVI-single link: 1920 x 1200 at 60 Hz;

VGA: 1920 x 1200 at 60 Hz Item Specifications Connectors (5) DVI-I (Female); (4) USB Type-A (Female); (4) USB Type-B (Female); (1) RJ45 (Female) options Port; (1) Barrel Power Jack; (5) 3.5-mm Audio Jacks Country of Origin United Kingdom Dimensions 1.64-in. H x 9.12-in. W x 4.32-in. D (42 x 232 x 110-mm) Indicators Multi-segment display control;

(2) front-panel push button Computer and Mode Weight 1.86-lb. (0.84-kg) Product Includes:

• ServSwitch Wizard DVI Dual-Link (USB)

• Power Supply

• IEC 320 Power Cord

• User Manual on CD

• (2) 19" Rackmounting Brackets

KV2304A Black Box KV2304A — Salient Characteristics Wizard KVM Switch - DVI-D Dual-Link, USB True Emulation, Audio, 4-Port High-end DVI KVM switching for multiple tri-head computers and USB devices.

KVM Switch - Tri-Head, DVI-D Dual-Link, USB True Emulation, Audio, 4-Port Product Features

• Enables a single user to control multiple computers

• Switch DVI video, keyboard, and mouse streams to multiple CPUs

• Each video head supports dual-link DVI video at up to 450 megapixels per second

• Control all functions from a console with two high-resolution DVI screens

• Supports video resolution up to 1920x1080 or boasts up to 2560x1600 (WQXGA)

• True emulation technology on switched USB 2.0 channels

• Equipped with audio inputs on KVM and computer channels

This highly flexible KVM switch centralizes and simplifies high-end, multi-head video switching access at a single user console with multiple DVI screens.

Plus, with advanced support for multiple high-speed USB devices, the ServSwitch Wizard DVI Dual-Link serves today's busy multitaskers quite well.

It's ideal for IT administrators and medical imaging, graphic design, and broadcast studio professionals who not only require quick, reliable access to multiple computer CPUs and multiple video channels, but also need simultaneous access to a mix of USB peripherals.

Select a channel on the ServSwitch Wizard DVI Dual-Link using hotkeys, a three-button mouse, or the switch's front-panel controls. When an auto-scan is enabled, the switch cycles between connected computers in sequence automatically. A seven-segment numeric display indicates the selected channel.

Multihead video channel access - simplified The ServSwitch Wizard DVI Dual-Link enables a single KVM workstation user to control four separate computer systems or servers and flexibly share peripherals among them.

In addition to three DVI-I video KVM user console inputs for multiscreen workstations, the switch features tri DVI-I video connectors on each of its four computer channels. This way, you have easy access to three video heads on each channel.

Each video head channel on this high-quality switch supports dual-link digital DVI video at up to 450 megapixels per second. Plus, it supports high resolutions, whether you need 2048 x 1080 video for post-production type of work or 2560 x 1600 (WQXGA) image clarity for very detailed medical or R and D lab imaging. Want to use VGA video instead of DVI?

Simply add DVI-to-VGA adapters.

In addition to tri video connectors, each computer channel on the ServSwitch Wizard DVI Dual-Link has USB Type B and 3.5-mm audio jack inputs.

Multicomputer and multiperipheral access This high-performance, multimedia switching platform offers more than just straight switching between four multi-head computer systems. You can also use a KVM console to work on one computer while your favorite USB devices remain connected to other computers, all easily accessible to you. And because the ServSwitch Wizard DVI Dual- Link supports audio connectivity, you can listen to connect speakers to yet another computer (audio can be switched independently from USB and video).

The ServSwitch Wizard DVI Dual-Link's rear panel has two USB Type-A ports as part of its KVM user console connections plus separate switched USB Type-A ports for additional USB 2.0 connectivity. You can reassign any of the connected USB peripherals to any of the connected computers quickly. The attached devices can either be switched in unison, or you can mix peripherals between any of the systems.

The switch supports a wide range of USB devices, especially high-speed USB 2.0 peripherals on its switched USB ports. Printers, scanners, and non-standard HID devices can all be attached. For instance, you can be creating e-mails on one system, listening to the audio on a second one, printing from a third computer, and scanning documents on another - all at the same time.

A switch featuring true USB emulation With advanced USB emulation technology, the ServSwitch Wizard DVI Dual-Link switch supports instant, reliable hotkey, and mouse switching. Other KVM switches often use a more generic emulation, relying on standard keyboard and mouse templates to provide peripheral info to connected computers. This results in support for only the most basic keyboard and mouse functions.

General Approvals CE Power Input: 100-240 VAC, 50-60 Hz; Output: 5 VDC, 2 A Item Specifications Connectors (15) DVI-I (Female); (4) USB Type-A (Female); (4) USB Type-B (Female); (1) RJ45 (Female) options Port; (1) Barrel Power Jack; (5) 3.5-mm Audio Jacks Country of Origin United Kingdom Dimensions 4-in. H (2.5 U) x 10.29-in. W x 5.96-in. D (102 x 261 x 151-mm) Indicators Multi-segment display control; (2) front-panel push button Computer and Mode Weight 3.25-lb. (1.48-kg) Product Includes:

• ServSwitch Wizard DVI Dual-Link KVM Switch Unit

• AC Power Adapter

• (4) Self-Adhesive Rubber Feet

• Safety Guide

KVXLC-200-R2 KVX Series KVM Extender Kit over CATx - DVI-D, USB 2.0, Serial, Audio, Local Video Extend KVM signals up to 100m over CAT5 cable.

Item #: KVXLC-100-R2KVM Extender Kit over CATx - Single-Monitor, DVI-D, USB 2.0, Audio, Serial, Local Video Out Product Features

• Supports DVI-D video resolution up to 1920x1200 at 60 Hz

• Local and remote units connect at distances of up to 330 feet (100m) using standard CAT5e/6 cables

• Transparent USB 2.0 extension supports HID devices, mass storage devices

• Supports RS-232 peripheral (serial) devices

• Bi-directional audio via speaker/mic connection

• Local DVI port loopback for monitoring on transmitter (TX) unit

• Supports EDID pass-through

• The KVX DVI-D KVM Extender lets you control a server or computer over a standard CAT5 or CAT6 UTP network cable connection at distances of up to 330 feet (100 meters).

PC connection cables are included with this product, making it a solution that is ready to use right out of the box.

• You can use your existing keyboard, mouse, and monitor to access both the server room and your office computer, saving space and avoiding the need for a dedicated remote console. Available with support for one or two monitors, KVX is the perfect low-cost solution for transportation control centers, medical facilities, industrial warehouses, and extended workstations.

• KVX is equipped with an RS-232 serial channel that connects to a serial terminal or to serial devices, such as touchscreens and barcode scanners. It eliminates the need for traveling back and forth between the local computer and remote console, making it an efficient and flexible solution.

• KVX also includes local video, allowing access to an additional monitor at the transmitter side. It's perfect for any situation that requires monitoring of connected PCs.

• This extender is TAA compliant and backed by free lifetime technical support. KVX is ideal for applications that require the console to be in a conveniently accessible location while the system equipment needs to reside in a safe place - away from dust, dirt, and harsh environmental influences. It also provides a cost-effective way of keeping sensitive data, such as financial and personal information, safe in a heavily secured data center while still allowing remote access to users.

General Housing Material Metal Chassis DDC Support DDC, DDC2, DDC2B Distance CATx cable: Up to 328 ft.