26-01171 Detailed specification document .pdf
PDF 60 KB Posted
- Attached to
- Multi-Channel 12 GHz Microwave Synthesizer Federal contract opportunity
- Solicitation number
- NB688000-26-01171
About this file
This document is a Statement of Objectives (SOO) specifying requirements for a multi-channel 12 GHz microwave synthesizer. The government is procuring one synthesizer unit with five total independent channels: three channels capable of generating sinusoidal output from 10 MHz to 12 GHz and two channels generating output from 10 MHz to 6 GHz (though 12 GHz capability is permissible). All channels require SMA connectors with 50 Ohm nominal load, output power ranging from -10 to 15 dBm, frequency step size of at most 0.001 Hz, and frequency and amplitude switching speeds of at most 500 microseconds. The three 12 GHz channels must demonstrate harmonic amplitude relative to 0 dBm carrier less than -25 dBc over 1–10 GHz, with SSB phase noise specifications of less than -90 dBc/Hz at 6 GHz (100 Hz offset), -110 dBc/Hz at 6 GHz (10 kHz offset), -85 dBc/Hz at 12 GHz (100 Hz offset), and -95 dBc/Hz at 12 GHz (10 kHz offset). Both channel sets must perform list-based frequency and amplitude scans; the two lower-frequency channels require an additional dedicated analog modulation port for frequency control with 100 kHz deviation and 20 kHz modulation bandwidth using a +/- 1V signal.
The synthesizer must include 10/100 MHz reference input and 100 MHz reference output capability, operate on standard US 110V AC consuming less than 100W, function under normal laboratory conditions (25°C), and feature programmability via USB and/or SPI or equivalent digital protocols. The chassis must fit in a 19-inch rack-mountable format less than 3U high without requiring dedicated mounting hardware. Additional requirements include calibration certification and computer-based control through a graphical user interface, with front panel control not necessary.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 26-01171 Requirements and Specifications.pdf | ||
| RFQ NB688000-26-01171 Unrestricted LPTA.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Title: Multi-channel 12 GHz microwave synthesizer
Item 1. Multi-channel microwave synthesizer
Item 1 Quantity: 1
1.1 Three (3) independent channels having the capability to generate sinusoidal output from 10 MHz to 12 GHz with the following attributes
1.1.1 SMA connectors, 50 Ohm nominal load
1.1.2 Output power ranges from -10 to 15 dBm
1.1.3 Frequency step size at most 0.001 Hz
1.1.4 Frequency switching speed at most 500 microseconds
1.1.5 Amplitude switching speed at most 500 microseconds
1.1.6 Harmonic amplitude relative to 0 dBm carrier < -25 dBc over 1 – 10 GHz frequency range
1.1.7 SSB Phase noise at 6 GHz less than -90 dBc/Hz @ 100 Hz offset
1.1.8 SSB Phase noise at 6 GHz less than -110 dBc/Hz @ 10 kHz offset
1.1.9 SSB Phase noise at 12 GHz less than -85 dBc/Hz @ 100 Hz offset
1.1.10 SSB Phase noise at 12 GHz less than -95 dBc/Hz @ 10 kHz offset
1.1.11 Ability to perform list-based scans of frequency and amplitude
1.2 Two (2) independent channels having capability to generate sinusoidal output from 10 MHz to 6
GHz with the following attributes (these channels could also be 12 GHz channels, but this capability is not necessary)
1.2.1 SMA connectors, 50 Ohm nominal load
1.2.2 Output power ranges from -10 to 15 dBm
1.2.3 Frequency step size at most 0.001 Hz
1.2.4 Frequency switching speed at most 500 microseconds
1.2.5 Amplitude switching speed at most 500 microseconds
1.2.6 Harmonic amplitude relative to 0 dBm carrier < -25 dBc over 1 – 10 GHz frequency range
1.2.7 SSB Phase noise at 6 GHz less than -90 dBc/Hz @ 100 Hz offset
1.2.8 SSB Phase noise at 6 GHz less than -110 dBc/Hz @ 10 kHz offset
1.2.9 Ability to perform list-based scans of frequency and amplitude
1.2.10 Dedicated analog modulation port for frequency control with 100 kHz deviation and 20 kHz of modulation bandwidth using a +/- 1V signal
1.3 Synthesizer should have a 10/100 MHz reference input and a 100 MHz reference output
1.4 Synthesizer should be power by standard US 110 V AC and consume less than 100 W
1.5 Synthesizer should operate under normal laboratory conditions (25 C)
1.6 Synthesizer should have the ability to program via USB and/or SPI (or equivalent digital protocols)
1.7 Synthesizer chassis should be in a 19” rack mountable chassis less than 3U high, doesn’t necessarily need 19” rack mounting hardware
1.8 Synthesizer should have a calibration certification
1.9 Synthesizer should controllable via a computer through a graphical user interface, a front panel interface is not necessary for this instrument
Title: Multi-channel 12 GHz microwave synthesizer
File details come from the government source that posted it. Updated .