25Q6015 Exhibit A.pdf
PDF 123 KB Posted
- Attached to
- FILLER, WELD (COVERED ELECTRODE) Federal contract opportunity
- Solicitation number
- SPMYM325Q6015
About this file
This is a Contract Data Requirements List (DD Form 1423) for contract SPMYM325Q6015 related to a Filer, Weld system/item. The document details two key data deliverables: 1) A Certificate of Quality Conform (Item A001) that requires one-time submission with quantitative test results per NAVSEA specifications T9074-BC-GIB-010/0200, and 2) A Certificate of Compliance with Special Emphasis (Item A002) that requires submission for each shipment and must be reviewed/accepted by Portsmouth Naval Shipyard before any material can be shipped.
Both deliverables require distribution to office 133.2 with 2 total copies each. The document specifies that all data submissions must be under separate shipment numbers and references payment clauses 252.232-7006, 252.232-7003, and 52.232-36. Additional requirements include marking and certification requirements for controlled industrial material. The form shows a print date of 9/28/2024 and is digitally signed.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 25Q6015 RFQ Required.docx | DOCX document | |
| T9074-BC-GIB-010 Appendix C.pdf | ||
| Clauses - Full Text Provisions and Clauses 241128.docx | DOCX document | |
| 25Q6015 Attachment 0001.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
3439 1D1 EXHIBIT 1
SYSTEM/ITEM FILER, WELD
ITEM NO A001
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 9/28/2024
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO
02 DATA DESC CERTIFICATE OF QUALITY CONFORM
03 SUBTITLE
04 DID NUMBER DI-MISC-82386
05 CONTRACT REF PARA C.3.1
06 TECH OFFICE 138.3
07 DD 250 REQ SD
08 APP CODE NA
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM NA
13 DATE SUB SUBM NA
14 DISTRIBUTION 133.2
15 TOTAL 2
16 REMARKS 1. PARAGRAPHS 6 AND 8 OF DI-MISC-82386 DO NOT APPLY.
2. TECHNICAL CONTENT AS DESCRIBED IN THE RESPECTIVE CONTRACT LINE ITEM(S).
3. THIS CERTIFICATION SHALL CONTAIN THE ACTUAL TEST RESULTS IAW PARA C.4.3
AND TABLE IV OF NAVSEA T9074-BC-GIB-010/0200.
4. TEST RESULT(S) SHALL BE QUANTITATIVE AND IN THE UNITS REQUIRED BY THE
SPECIFICATION.
5. FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSES 252.232-7006 & 252.232-
7003 OR 52.232-36. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE SUBMITTED
UNDER A SEPRATE SHIPMENT NUMBER.
6. IN ADDITION TO THE CERTIFICATION DATA REQUIREMENT SPECIFIED IN DI-MISC-
82386, THE REQUIREMENTS OF THE CONTRACT SECTION TITLED "MARKING AND
CERTIFICATION REQUIREMENTS FOR CONTROLLED INDUSTRIAL MATERIAL" APPLY.
SEQ. NO.
PREPARED BY
APPROVED BY
DATE
DATE
DD FORM 1423
09 IAC INPUT
/1
SPMYM325Q6015
1/2
3439 1D1 EXHIBIT 1
SYSTEM/ITEM FILER, WELD
ITEM NO A002
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 9/28/2024
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO
02 DATA DESC CERTIFICATE OF COMPLIANCE
03 SUBTITLE SPECIAL EMPHASIS C OF C
04 DID NUMBER DI-MISC-80678 (CCDD)
05 CONTRACT REF PARA C.3.2
06 TECH OFFICE 138
07 DD 250 REQ DD
08 APP CODE NA
10 FREQUENCY ONE/R
11 AS OF DATE
12 DATE 1ST SUBM N/A
13 DATE SUB SUBM N/A
14 DISTRIBUTION 133.2
15 TOTAL 2
16 REMARKS BLOCK 4 - PARAGRAPHS 10.2.1, 10.2.2, 10.2.3, 10.3, AND 10.4 OF DI-MISC-80678 DO NOT
APPLY. FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSE 252.232-7006 AND
252.232-7003 OR 52.232-36. CERTIFICATION DATA SHALL BE SUBMITTED TO
PORTSMOUTH NAVAL SHIPYARD FOR REVIEW AND ACCEPTANCE PRIRO TO EACH
SHIPMENT OF MATERIAL. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE
SUBMITTED UNDER SEPARATE SHIPMENT NUMBER. NO MATERIAL IS TO BE SHIPPED
PRIOR TO THE RECEIPT OF ACCEPTANCE.
SEQ. NO.
PREPARED BY
APPROVED BY
DATE
DATE
DD FORM 1423
09 IAC INPUT
/1
SPMYM325Q6015
2/2
File details come from the government source that posted it. Updated .