25Q6015 Attachment 0001.pdf
PDF 117 KB Posted
- Attached to
- FILLER, WELD (COVERED ELECTRODE) Federal contract opportunity
- Solicitation number
- SPMYM325Q6015
About this file
This is a technical specification document detailing requirements for welding electrodes (covered electrodes/welding filler) to be manufactured in accordance with T9074-BC-GIB-010/0200 Appendix C. The electrodes must be 1/8" in outside diameter, 14" in length, and meet MIL-10718-M classification. Key requirements include maximum chromium content limitations, dielectric strength specifications, and mandatory heat/lot marking codes for individual electrodes. The document specifies that materials must be furnished from a single lot when possible and requires quality conformance certification documentation for each shipment lot.
This specification is part of solicitation SPMYM325Q6015 issued by Defense Logistics Agency Land and Maritime for 1,200 pounds of welding filler material. The solicitation is a 100% small business set-aside with a closing date of January 17, 2025 at 3:00 PM, using Lowest Price Technically Acceptable (LPTA) evaluation criteria. Vendors must submit descriptive literature demonstrating compliance with specifications, and delivery is FOB destination with Net 30 payment terms. The small business size standard is 1,250 employees under NAICS code 333992.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| T9074-BC-GIB-010 Appendix C.pdf | ||
| Clauses - Full Text Provisions and Clauses 241128.docx | DOCX document | |
| 25Q6015 RFQ Required.docx | DOCX document | |
| 25Q6015 Exhibit A.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT
PRINTED 12/23/2024 ATTACHMENT PAGE
3439 1D1
C DESCRIPTION/SPECIFICATIONS
C.1 MANUFACTURED IN ACCORDANCE WITH T9074-BC-GIB-010/0200 APPENDIX C.
ACQUISITION REQUIREMENTS:
(A) "ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER, LOW-HYDROGEN MEDIUM, HIGH
TENSILE AND HIGHER-STRENGTH LOW ALLOY STEELS", T9074-BC-GIB-010/0200 APPENDIX C
11 DEC 2002
(B) TYPE, SIZE AND LENGTH AND CLASSIFICATION TO BE SPECIFIED IN SECTION B OF THIS SCHEDULE
(C) NOT REQUIRED
(D) NOT REQUIRED
(E) MAXIMUM CHROMIUM CONTANT OF FOOTNOTE 4 OF TABLE 1 APPLIES
(F) NOT APPLICABLE
(G) ELECTRODES SHALL HAVE A DIELECTRIC STRENGTH OTHER THAN A DIAELECTRIC STRENGTH
ABLE TO INSULATE AGAINST 110 VOLTS, 60-HZ ALTERNATING CURRENT (SEE C.3.4.7 OF TECH PUB)
(H) HEAT, LOT, OR OTHER MARKING CODES ARE REQUIRED FOR INDIVIDUAL
ELECTRODES (SEE C.3.5 OF TECH PUB)
(I) NOT REQUIRED
(J) NOT APPLICABLE
(K) NOT REQUIRED
(L) NOT REQUIRED
(M) NOT REQUIRED
(N) NOT APPLICABLE
C.2. MATERIAL DESCRIBED BY A STOCK NUMBER SHALL BE FURNISHED FROM ONE LOT EXCEPT WHEN PROHIBITED BY NORMAL MANUFACTURING PROCEDURES, IN WHICH CASE, THE CONTRACTOR SHALL
LIMIT, TO THE MAXIMUM EXTENT POSSIBLE, THE NUMBER OF LOTS OFFERED FOR DELIVERY.
C.3. DATA REQUIRMENTS
C.3.1 CERT. OF QUALITY CONF (N/PROP) SEE EXHIBIT A. SEQUENCE A001
ONE COMPLETED COPY OF A CERTIFICATION OF QUALITY CONFORMANCE TEST IAW PARAGRAPH
C.4.4 OF NAVSEA T9074-BC-GIB-010/0200 APPENDIX C SHALL BE FORWARDED FOR EACH LOT THAT
IS INCLUDED IN THE SHIPMENT. THE CERTIFICATION OF QUALITY CONFORMANCE SHALL BE
SIGNED AND DATED BY A DESIGNATION VENDOR OFFICIAL.
C.3.2 SPECIAL EMPHASIS C OF C SEE EXHIBIT A SEQUENCE A002
C.4 C524 MARKING & CERTIFICATION REQUIREMENTS FOR CIM
D PRESERVATION/PACKAGING/PACKING
D.1 D4 PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)
ITEM NO.
STOCK NUMBER
3439-LL-DM1-0541
SPECIAL CHARACTERISTICS
OUTSIDE DIAMETER: 1/8"
LENGTH: 14"
CLASSIFICATION: MIL-10718-M
SPEC: T9074-BC-GIB-010/0200 APPENDIX C
ITEM NAME FILLER, WELD (COVERED ELECTRODE)
SECTION B
SMIC
3j
SPMYM325Q6015
0001 1/2
CONTRACT
PRINTED 12/23/2024 ATTACHMENT PAGE
3439 1D1
E INSPECTION ACCEPTANCE
E.1 E1 RESPONSIBILITY FOR INSPECTION
E.2 E2 INSPECTION AND ACCEPTANCE (DESTINATION)
E.3 E504 NOTICE OF CONSTRUCTIVE ACCEPTANCE PERIOD
H SPECIAL PROVISIONS
K Section
L Section
M Section
SPMYM325Q6015
2/20001
File details come from the government source that posted it. Updated .