25Q0580_SOL.pdf

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

15. DATE OF QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

b. TELEPHONE

AREA CODE

NUMBER

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

8. TO:

b. COMPANYa. NAME

c. STREET ADDRESS

d. CITY e. STATE f. ZIP CODE

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

c. CITY

d. STATE e. ZIP CODE

7. DELIVERY

FOB DESTINATION

OTHER

(See Schedule)

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY 6. DELIVER BY (Date)

5b. FOR INFORMATION CALL (NO COLLECT CALLS)

NAME TELEPHONE NUMBER

AREA CODE NUMBER

N0016425Q0580

Section A - Solicitation/Contract Form

25-WXP-0191

25-WXP-0191

Product Service Code: 5950 Date: 10 Mar 2025

SOLE SOURCE PROCUREMENT- The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source, , Robert M. Hadley Company, Inc. 4054 TRANSPORT ST STE B, VENTURA, CA 93003 USA, Cage Code 74962 under the authority of FAR 13.106-1. This is being solicited on a sole source only basis because Robert M. Hadley Company, Inc. is the only the requirement per applicable drawings. Robert M. Hadley Company, Inc. does not have authorized 3rd party distributors approved Source to supply or resellers. All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government.

Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.

DISTRIBUTION D

TECHNICAL DATA INFORMATION

THE TECHNICAL DATA PACKAGE CONTAINS DISTRIBUTION STATEMENT "D"

DISTRIBUTION AUTHORIZED TO THE DOD AND DOD CONTRACTORS ONLY;

CRITICAL TECHNOLOGY; 10 FEBRUARY 2021. OTHER REQUESTS FOR THIS

DOCUMENT SHALL BE REFERRED TO COMMANDER, CRANE DIVISION, NAVAL

SURFACE WARFARE CENTER (CODE WXP), CRANE, IN 47522-5001

WARNING -THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. SEC 2751

ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979 (TITLE 50, U.S.C., APP

2401 ET SEQ.), AS AMENDED. VIOLATIONS OF THESE EXPORT LAWS ARE

SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN ACCORDANCE

WITH PROVISIONS OF DOD DIRECTIVE

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

Items Peculiar to One Manufacturer Robert M. Hadley Company, Inc.

Collector Current Transformer P/N: 23439 IAW Statement of Work, Drawing 80952707 Rev B, and CDRL A001

Shipping to NSWC Crane, IN 47522 included

Vendor will manufacture a Qty. of 25 each every six (6) weeks.

Accelerated deliveries will be accepted at no additional cost to the GOVT. Furnish all labor, materials, supplies, Equipment, supervision, and transportation, FOB Destination, Crane, IN 47522.

Pricing Arrangement: Firm Fixed Price

100 Each

Items Peculiar to One Manufacturer Robert M. Hadley Company, Inc.

High Voltage (HV) Heater Transformer P/N: 20660-2 IAW Statement of Work, Drawing 80952804 Rev D, and CDRL A001

Shipping to NSWC Crane, IN 47522 included

Vendor will manufacture a Qty. of 25 each every six (6) weeks.

Accelerated deliveries will be accepted at no additional cost to the GOVT. Furnish all labor, materials, supplies, Equipment, supervision, and transportation, FOB Destination, Crane, IN 47522.

Pricing Arrangement: Firm Fixed Price

100 Each

CDRL - A001 - NOT SEPARATLY PRICED

Acceptance Test Report for CLIN 0001 and 0002 IAW Statement of Work, Drawings, and CDRL A001

ALL TECHNICAL DATA/DATA GENERATED UNDER THIS

PROCUREMENT HAS BEEN PAID FOR, IN FULL BY THE

GOVERNMENT

The Government will retain rights to all intellectual property produced in the course of developing, deploying, training, using and supporting NSWC Crane under N0016425Q0580. All modifications to N0016425Q0580 will be property of the Government. The Government shall have unlimited data rights to all generated. IAW DFARS 252.227-7013. The Contractor will be required to negotiate agreements with commercial systems vendors relating to nondisclosures of vendors proprietary information.

DATA RIGHTS - are for those data deliverables under SOW(s) as ref.

in Section 4.2.1 Data Deliverables to include the following: CDRL A001 for Base Award CLINS IAW FAR and DFARS Terms and Conditions. In addition, ref. DFARS 252.227-7013, DFARS 252.227-

7027, DFARS 252.227-7028, DFARS 252.227-7030,,DFARS 252.227-

7037 and DFARS 252.204-7000

Pricing Arrangement: Firm Fixed Price

100 Each

Section C - Description/Specifications/Statement of Work

STATEMENT OF WORK

Distribution Statement A: Distribution authorized Public Release; distribution is unlimited

1.0 SCOPE

This Statement of Work (SOW) defines the requirements for equipment, material, and services to be furnished to Naval Surface Warfare Center Crane (hereinafter referred to as "NSWC Crane") by the recipient of a contract (hereinafter referred to as "Contractor") for the production of Collector current transformer and Heater Transformer. These transformers are intended to serve as a form, fit, and function replacement for transformers used in a military, airborne High Voltage Power Supplies (HVPSs).

1.1 COMPONENT PART NUMBERS

80952707 Collector Current Transformer

80952804 High Voltage Heater Transformer

2.0 APPLICABLE DOCUMENT

N/A

2.1 SPECIFICATIONS

80952707, Rev B Collector Current Transformer

80952804, Rev D High Voltage Heater Transformer

2.2 OTHER DOCUMENTS

ISO 9003 Quality Systems - Model for Quality Assurance in Final Inspection and Test

3.0 REQUIREMENTS

3.1 EQUIPMENT, MATERIALS, AND SERVICES

It is NSWC Crane's intent to procure Collector Current Transformer and Heater Transformer. The Contractor shall perform the work, render the services, and provide the data, facilities, personnel, materials, and supplies as necessary to manufacture, inspect, test, package, and deliver transformers in accordance with the contract. The listed transformers have previously completed certification testing however NSWC Crane reserves the right to perform certification testing on all transformers at its discretion to verify compliance. The certification testing is defined in paragraph 6.0.

3.1.1 CONSTRUCTION, PERFORMANCE AND PHYSICAL DIMENSIONS

The performance and physical dimensions of the transformers shall be as defined in the transformers specifications. The construction (materials, techniques, etc.) defined in the specifications may be changed provided the contractor receives written authorization from

NSWC Crane to deviate from the specification requirements. NSWC Crane, at its discretion, may incorporate authorized changes into the specification for future procurements.

4.0 PRODUCT ASSURANCE PROVISIONS

4.1 QUALITY ASSURANCE PROGRAM

The Contractor shall establish and maintain a quality assurance program in accordance with ISO 9003 or similar quality assurance standard.

The quality assurance program shall ensure quality control throughout all areas of contract performance. The quality assurance program shall be available for NSWC Crane review upon request.

4.1.1 PROGRAM MANAGEMENT

The Contractor shall direct, manage, and monitor performance of the contract in order to satisfy contractual requirements, to assure that the production of all deliverable items is accomplished on schedule, and to resolve any problems or schedule delays.

4.1.2 CONFIGURATION CONTROL

The Contractor shall maintain a configuration control program throughout the duration of this contract. The configuration baseline for each component is established when the component is deemed qualified based on certification testing. Once the configuration baseline is established, there shall be no component configuration changes made without NSWC Crane's approval. The configuration documentation shall be available for NSWC Crane's review at the Contractor's facility.

4.1.3 CONTRACTOR DATA

The Contractor shall maintain copies of all production data, test data, failure investigations, and corrective actions at the contractor's facility for NSWC Crane's review.

4.1.4 PERIODIC VISITS

The Contractor shall make his facility available, at no additional cost, for periodic visits by NSWC Crane personnel.

4.2 ACCEPTANCE TEST

An acceptance test shall be performed on each component to verify the component meets the requirements of the component specification.

4.2.1 ACCEPTANCE TEST REPORT

A paper copy of the acceptance test data shall be provided with each component delivered and an electronic copy (pdf format) shall be provided to NSWC Crane's engineering representative. There shall be a separate acceptance test report for each listed magnetic component (transformer p/n 80952707 and 80952804) however multiple quantities of a magnetic component may be on the acceptance test report.

(A001)

5.0 QUANTITY AND DELIVERY REQUIREMENTS

Quantities and delivery schedules of components shall be as delineated in the contract or delivery order.

5.1 DELIVERABLE DATA

Data required per this Statement of Work shall be marked with the contract number and CDRL number.

CDRL: A001

DID Number: DI-NDTI-80809B

DID Title: Test/Inspection Report

Subtitle: Acceptance Test Report

SOW Para: 4.2.1

5.2 PACKAGING AND MARKING

Components and documentation shall be packaged and marked in accordance with good commercial practices, to protect against physical damage and insure its safe arrival at NSWC Crane's facility.

6.0 GOVERNMENT CERTIFICATION TEST

Certification test are not required for contractors that have already completed certification testing and are deemed qualified to produce the Components. NSWC Crane reserves the right to perform certification testing on all components at its discretion to verify compliance. The certification test will be performed by NSWC Crane at NSWC Crane facilities.

6.1 CERTIFICATION TEST IN HVPS

Certification testing consist of five (5) components installed in a minimum of three (3) HVPSs and the three HVPSs subjected to appropriate Screening Test Procedure, Functional Test Procedure and Acceptance Test Procedure. Then two HVPSs will be selected and subjected to the appropriate Qualification Test Procedure, Functional Test Procedure, and Acceptance Test Procedure. NSWC Crane reserves the right to perform a sub-set of the certification testing.

The Screening Test Procedure (STP), Functional Test Procedure (FTP), Acceptance Test Procedure (ATP), Qualification Test Procedure (QTP), and HVPS Specification for the Mid/High Band (M/HB) HVPS and Low Band (LB) HVPS will be provided upon request.

6.2 POINTS OF CONTACT

Requiring Technical Agent (RTA), Mr. Waiel Haj Elnur, 812-854-6649, email: Waiel.T.Hajelnur.civ@us.navy.mil

Requirements

25-WXP-0191

Additional Regulation or Supplemental Clauses Incorporated by Full Text

C-227-H006 DATA REQUIREMENTS (NAVSEA) (OCT 2018) (Oct 2018)

The data to be furnished hereunder shall be prepared in accordance with the Contract Data Requirements List, DD Form 1423, Exhibit(s) , attached hereto.

(End of Text)

C-245-H005 INFORMATION AND DATA FURNISHED BY THE GOVERNMENT--ALTERNATE

I (NAVSEA) (MAY 2019)

(May 2019)

(a) Contract Specifications, Drawings and Data. The Government will furnish, if not included as an attachment to the contract, any unique contract specifications or other design or alteration data cited or referenced in Section C.

(b) . GFI is defined as that information essential for the installation, test, operation, Government Furnished Information (GFI) and interface support of all Government Furnished Material identified in an attachment in Section J. The Government shall furnish only the GFI identified in an attachment in Section J. The GFI furnished to the contractor need not be in any particular format. Further, the Government reserves the right to revise the listing of GFI as follows:

(1) The Contracting Officer may at any time by written order:

(i) delete, supersede, or revise, in whole or in part, data identified in an attachment in Section J; or

(ii) add items of data or information to the attachment identified in Section J; or

(iii) establish or revise due dates for items of data or information in the attachment identified in Section J.

(2) If any action taken by the Contracting Officer pursuant to subparagraph (1) immediately above causes an increase or decrease in the costs of, or the time required for, performance of any part of the work under this contract, the contractor may be entitled to an equitable adjustment in the contract amount and delivery schedule in accordance with the procedures provided for in the "CHANGES" clause of this contract.

(c) Except for the Government information and data specified by paragraphs (a) and (b) above, the Government will not be obligated to furnish the Contractor any specification, standard, drawing, technical documentation, or other publication, notwithstanding anything to the contrary in the contract specifications, the GFI identified in an attachment in Section J, the clause of this contract entitled "Government Property" (FAR 52.245-1) or "Government Property Installation Operation Services" (FAR 52.245-2), as applicable, or any other term or condition of this contract. Such referenced documentation may be obtained:

(1) From the ASSIST database via the internet at https://assist.dla.mil/online/start/; or

(2) By submitting a request to the

Department of Defense Single Stock Point (DoDSSP)

Building 4, Section D

700 Robbins Avenue

Philadelphia, Pennsylvania 19111-5094

Telephone (215) 697-6396

Facsimile (215) 697-9398

Commercial specifications and standards, which may be referenced in the contract specification or any sub-tier specification or standard, are not available from Government sources and should be obtained from the publishers.

(End of Text) https://assist.dla.mil/online/start/

Section D - Packaging and Marking

Section E - Inspection and Acceptance

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.246-1 Contractor Inspection Requirements. Apr 1984 52.246-16 Responsibility for Supplies. Apr 1984

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: POC upon delivery

DoDAAC: N00164 CountryCode: USA

NSWC CRANE

300 HIGHWAY 361, SUPPLY OPERATIONS BLDG 41 RECEIVING

CRANE, IN 47522-5001

UNITED STATES

Kim Christianberry, Bldg. 3168 Telephone: 812-854-3326

Inspection and Acceptance Location

Both Destination Instructions: POC upon delivery

DoDAAC: N00164 CountryCode: USA

NSWC CRANE

300 HIGHWAY 361, SUPPLY OPERATIONS BLDG 41 RECEIVING

CRANE, IN 47522-5001

UNITED STATES

Kim Christianberry, Bldg. 3168 Telephone: 812-854-3326

Inspection and Acceptance Location

Both Destination Instructions: POC upon delivery

DoDAAC: N00164 CountryCode: USA

NSWC CRANE

300 HIGHWAY 361, SUPPLY OPERATIONS BLDG 41 RECEIVING

CRANE, IN 47522-5001

UNITED STATES

Kim Christianberry, Bldg. 3168 Telephone: 812-854-3326

Section F - Deliveries or Performance

Contractor Destination

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery On Or Before Delivery Date 29 May

100 Each Ship To DoDAAC: N00164 CountryCode: USA

NSWC CRANE

300 HIGHWAY 361, SUPPLY OPERATIONS BLDG

41 RECEIVING

CRANE, IN 47522-5001

UNITED STATES

Kim Christianberry, Bldg. 3168 Telephone: 812-854-3168

FoB Details Contractor Destination

Delivery Before Delivery Date 24 Jul

100 Each Ship To DoDAAC: N00164 CountryCode: USA

NSWC CRANE

300 HIGHWAY 361, SUPPLY OPERATIONS BLDG

41 RECEIVING

CRANE, IN 47522-5001

UNITED STATES

Kim Christianberry, Bldg. 3168 Telephone: 812-854-3168

FoB Details Contractor Destination

Delivery Before Delivery Date 24 Jul

100 Each Ship To DoDAAC: N00164 CountryCode: USA

NSWC CRANE

300 HIGHWAY 361, SUPPLY OPERATIONS BLDG

41 RECEIVING

CRANE, IN 47522-5001

UNITED STATES

Kim Christianberry, Bldg. 3168 Telephone: 812-854-3168

FoB Details Contractor Destination

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.242-17 Government Delay of Work. Apr 1984 52.247-48 F.o.b. Destination-Evidence of Shipment. Feb 1999

FAR Clauses Incorporated by Full Text

52.211-9 Desired and Required Time of Delivery. (Jun 1997)

DESIRED AND REQUIRED TIME OF DELIVERY (JUNE 1997)

(a) The Government desires delivery to be made according to the following schedule:

Desired Delivery Schedule

[ ]Contracting Officer insert specific details

Item No. Quantity Within Days After Date of Contract

If the offeror is unable to meet the desired delivery schedule, it may, without prejudicing evaluation of its offer, propose a delivery schedule below.

However, the offeror's proposed delivery schedule must not extend the delivery period beyond the time for delivery in the Government's required delivery schedule as follows:

Required Delivery Schedule

[ ]Contracting Officer insert specific details

Item No. Quantity Within Days After Date of Contract

Offers that propose delivery of a quantity under such terms or conditions that delivery will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. If the offeror proposes no other delivery schedule, the desired delivery schedule above will apply.

Offeror's Proposed Delivery Schedule

Item No. Quantity Within Days After Date of Contract

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed or otherwise furnished to the successful offeror results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day the award is dated. Therefore, the offeror shall compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term "working day" excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

(End of clause)

52.247-34 F.o.b. Destination. (Nov 1991)

F.O.B. DESTINATION (JAN 1991)

(a) The term "f.o.b. destination," as used in this clause, means-

(1) Free of expense to the Government, on board the carrier's conveyance, at a specified delivery point where the consignee's facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and

(2) Supplies shall be delivered to the destination consignee's wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the Contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or other charges involved before the actual delivery (or "constructive placement" as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including "piggyback") is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item568 of the National Motor Freight Classification for "heavy or bulky freight." When supplies meeting the requirements of the referenced Item568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested. If the contractor uses rail carrier or freight forwarded for less than carload shipments, the contractor shall ensure that the carrier will furnish tailgate delivery, when required, if transfer to truck is required to complete delivery to consignee.

(b) The Contractor shall-

(1)

Pack and mark the shipment to comply with contract specifications; or(i)

(ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements;

(2) Prepare and distribute commercial bills of lading;

(3) Deliver the shipment in good order and condition to the point of delivery specified in the contract;

(4) Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract;

(5) Furnish a delivery schedule and designate the mode of delivering carrier; and

(6) Pay and bear all charges to the specified point of delivery.

(End of clause)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

F-242-H001 CONTRACTOR NOTICE REGARDING LATE DELIVERY (NAVSEA) (OCT 2018) (Oct 2018)

In the event the contractor anticipates or encounters difficulty in complying with the contract delivery schedule or date, the contractor shall immediately notify, in writing, the Contracting Officer and the cognizant Contract Administration Services Office, if assigned. The notice shall give the pertinent details; however, such notice shall not constitute a waiver by the Government of any contract delivery schedule, or of any rights or remedies provided by law or under this contract.

(End of Text)

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause-Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall-WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.

WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s):Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving (COMBO)

INSPECTION - DESTINATION

ACCEPTANCE - DESTINATION

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.

when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC N62828= TBA

Issue By DoDAAC N00164

Admin DoDAAC N00164

Inspect By DoDAAC N/A

Ship To Code N00164

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) N/A

Service Acceptor (DoDAAC) N/A

Accept at Other DoDAAC N/A

LPO DoDAAC TBA

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Please send notifications to: mary.j.bradley34.civ@us.navy.mil

For invoicing questions: usn.crane.nswc-cd-crane-in.mbx.cran-acquisitn-wawf@us.navy.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed. (End of clause)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

G-232-H005 SUPPLEMENTAL INSTRUCTIONS REGARDING INVOICING (NAVSEA) (JAN

2019)

(Jan 2019)

(a) For other than firm fixed priced contract line item numbers (CLINs), the Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the sub line item number (SLIN) or CLIN level, rather than at the total contract/TO level, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost break down of other direct costs (ODCs), materials, and travel, by technical instruction (TI), SLIN, or CLIN level. For other than firm fixed price subcontracts, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal. Subcontractors may email encryption code information directly to the Contracting Officer and Contracting Officer Representative (COR). Shouldthe subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the Contracting Officer and COR; or other method as agreed to by the Contracting Officer.

(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and Contracting Officer on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and Contracting Officer email notification as required herein.

(End of Text)

G-242-H002 HOURS OF OPERATION AND HOLIDAY SCHEDULE (NAVSEA) (JUL 2021) (Jul 2021)

(a) The policy of this activity is to schedule periods of reduced operations or shutdown during holiday periods. Deliveries will not be accepted on Saturdays, Sundays or Holidays except as specifically requested by the [insert activity name]. All goods or services attempted to be delivered on a

Saturday, Sunday or Holiday without specific instructions from the Contracting Officer or his duly appointed representative will be returned to the contractor at the contractor's expense with no cost or liability to the U.S. Government.

(b) The federal Government observes public Holidays that have been established under 5 U.S.C. 6103. The actual date of observance foreach of the holidays, for a specific calendar year, may be obtained from the OPM website at OPM.GOV or by using the following direct link: https://www.opm.

gov/policy-data-oversight/pay-leave/federal-holidays/.

(c) Delayed Opening, Early Dismissal and Closure of Government Facilities. When a Government facility has a delayed opening, is closed or Federal employees are dismissed early (due to severe weather, security threat, security exercise, or a facility related problem) that prevents personnel from working, onsite contractor personnel regularly assigned to work at that facility shall follow the same reporting and/or departure directions given to Government personnel. The contractor shall not direct charge to the contract for such time off, but shall follow parent company policies regarding taking leave (administrative or other). Non-essential contractor personnel, who are not required to remain at or report to the facility, shall follow their parent company policy regarding whether they should go/stay home or report to another company facility. Subsequent to an early dismissal, delayed opening, or during periods of inclement weather, onsite contractors should monitor the OPM website as well as radio and television announcements before departing for work to determine if the facility is closed or operating on a delayed arrival basis.

(d) When Federal employees are excused from work due to a holiday or a special event (that is unrelated to severe weather, a security threat, or a facility related problem), on site contractors shall continue working established work hours or take leave in accordance with parent company policy.

Those contractor employees who take leave shall not direct charge the non-working hours to the contract. Contractors are responsible for predetermining and disclosing their charging practices for early dismissal, delayed openings, or closings in accordance with the FAR, applicable cost accounting standards, and the company's established policy and procedures. Contractors shall follow their disclosed charging practices during the contract period of performance, and shall not follow any verbal directions to the contrary. The Contracting Officer will make the determination of cost allowability for time lost due to facility closure in accordance with FAR, applicable Cost Accounting Standards, and the Contractor's established accounting policy and procedures.

(e) If you intend to visit the Contracts Office, it is advised that you call for an appointment at least 24 hours in advance.

(f) The hours of operation are as follows:

AREA FROM TO

NSWC Crane 0600 1600

(g) All deliveries to the Receiving Officer, Bldg 41 shall be made Monday through Friday from 0600 to 1600, local time. Deliveries will not be accepted after . 1600 No deliveries will be accepted on federal government holidays.

(End of Text)

G-242-H001 GOVERNMENT CONTRACTADMINISTRATION POINTS-OF-CONTACT AND

RESPONSIBILITIES (NAVSEA) (OCT 2023)

(Oct 2023)

(a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time.

(b) The contracting officer is the only person authorized to change this contract or orders issued thereunder. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract.

(c) The points of contact are as follows:

(i) The Procuring Contracting Officer (PCO) is:

Name: Marty Kay Arvin Address: 300 Hwy. 361, Crane, IN 47522 Phone: (812) 854-8443 E-mail: marty.arvin.civ@us.navy.mil

(ii) The Contract Specialist is:

Name: Mark Swartzentruber Address: 300 Hwy. 361, Crane, IN 47522 Phone: (812) 854-6958 E-mail: mark.r.swartzentruber.civ@us.navy.mil

Requiring Technical Agent (RTA), https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/ https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/

Name: Mr. Waiel Haj Elnur, Phone: 812-854-6649, Email: Waiel.T.Hajelnur.civ@us.navy.mil

(j) The Contractor's point of contact for performance under this contract is:

Name:

Address:

Phone:

E-mail:

[ * ] To be completed at contract award

(End of Text)

G-242-W001 CONTRACT ADMINISTRATION FUNCTIONS (NAVSEA) (OCT 2018) (Oct 2018)

(a) In accordance with FAR 42.302(a) all functions listed are delegated to the ACO except the following items to be retained by the PCO: NO

EXCEPTIONS

(End of Text)

Section H - Special Contract Requirements

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities.

Dec 2023

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Nov 2021

52.204-27 Prohibition on a ByteDance Covered Application. Jun 2023 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations. Nov 2015 52.211-15 Defense Priority and Allocation Requirements. Apr 2008 52.222-4 Contract Work Hours and Safety Standards -Overtime Compensation. May 2018 52.222-19 Child Labor-Cooperation with Authorities and Remedies. Feb 2024 52.222-20 Contracts for Materials, Supplies, Articles, and Equipment. Jun 2020 52.222-35 Equal Opportunity for Veterans. Jun 2020 52.222-36 Equal Opportunity for Workers with Disabilities. Jun 2020 52.222-50 Combating Trafficking in Persons. Nov 2021 52.223-23 Sustainable Products and Services. May 2024 52.225-13 Restrictions on Certain Foreign Purchases. Feb 2021 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.229-12 Tax on Certain Foreign Procurements. Feb 2021 52.232-23 Assignment of Claims. May 2014 52.233-3 Protest after Award. Aug 1996 52.233-4 Applicable Law for Breach of Contract Claim. Oct 2004 52.243-1 Changes-Fixed-Price. Aug 1987 52.249-1 Termination for Convenience of the Government (Fixed-Price) (Short Form). Apr 1984

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7000 Disclosure of Information. Oct 2016 252.204-7003 Control of Government Personnel Work Product. Apr 1992

252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information.

Jan 2023

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements. Nov 2023 252.204-7022 Expediting Contract Closeout. May 2021

252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism.

May 2019

252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7048 Export-Controlled Items. Jun 2013 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023 252.227-7013 Rights in Technical Data-Other Than Commercial Products and Commercial Services. Mar 2023 252.227-7016 Rights in Bid or Proposal Information. Jan 2023 252.227-7030 Technical Data--Withholding of Payment. Mar 2000 252.227-7037 Validation of Restrictive Markings on Technical Data. Jan 2023 252.232-7010 Levies on Contract Payments. Dec 2006 252.239-7018 Supply Chain Risk. Dec 2022 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.244-7001 Contractor Purchasing System Administration. (Alternate I) May 2014 Alternate I May 2014 252.246-7007 Contractor Counterfeit Electronic Part Detection and Avoidance System. Jan 2023 252.246-7008 Sources of Electronic Parts. Jan 2023

252.247-7023 Transportation of Supplies by Sea. Oct 2024

FAR Clauses Incorporated by Full Text

52.211-5 Material Requirements. (Aug 2000)

MATERIAL REQUIREMENTS (AUG 2000)

(a) .Definitions

As used in this clause-

New means composed of previously unused components, whether manufactured from virgin material, recovered material in the form of raw material, or materials and by-products generated from, and reused within, an original manufacturing process; that the supplies meet contract provided requirements, including but not limited to, performance, reliability, and life expectancy.

Reconditioned means restored to the original normal operating condition by readjustments and material replacement.

Recovered material means waste materials and by-products recovered or diverted from solid waste, but the term does not include those materials and by-products generated from, and commonly reused within, an original manufacturing process.

Remanufactured means factory rebuilt to original specifications.

Virgin material means-

(1) Previously unused raw material, including previously unused copper, aluminum, lead, zinc, iron, other metal or metal ore; or

(2) Any undeveloped resource that is, or with new technology will become, a source of raw materials.

(b) Unless this contract otherwise requires virgin material or supplies composed of or manufactured from virgin material, the Contractor shall provide supplies that are new, reconditioned, or remanufactured, as defined in this clause.

(c) A proposal to provide unused former Government surplus property shall include a complete description of the material, the quantity, the name of the Government agency from which acquired, and the date of acquisition.

(d) A proposal to provide used, reconditioned, or remanufactured supplies shall include a detailed description of such supplies and shall be submitted to the Contracting Officer for approval.

(e) Used, reconditioned, or remanufactured supplies, or unused former Government surplus property, may be used in contract performance if the Contractor has proposed the use of such supplies, and the Contracting Officer has authorized their use.

(End of clause)

52.213-4 Terms and Conditions-Simplified Acquisitions (Other Than Commercial Products and Commercial Services).

(Jan 2025)

As prescribed in , insert the following clause:13.302-5(d)

TERMS AND CONDITIONS-SIMPLIFIED ACQUISITIONS (OTHER THAN COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES) (JAN 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses that are incorporated by reference:

(1) The clauses listed below implement provisions of law or Executive order:

(i) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title (JAN 2017) VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(ii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (DEC (Section 1634 of Pub. L. 115-91).2023)

(iii) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section (NOV 2021) 889(a)(1)(A) of Pub. L. 115-232).

(iv) 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328), unless the agency (JUN 2023) grants an exception - see paragraph (b) of 52.204-27.

(v) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(DEC 2023)

(vi) 52.222-3, Convict Labor (E.O.11755).(JUN 2003)

(vii) 52.222-21, Prohibition of Segregated Facilities .(APR 2015)

(viii) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

(ix) 52.225-13, Restrictions on Certain Foreign Purchases ( ) (E.O.s, proclamations, and statutes administered by the Office of Foreign FEB 2021 Assets Control of the Department of the Treasury).

(x) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.S.C. 3903 and 10 U.S.C. 3801).(MAR 2023)

(xi) 52.233-3, Protest After Award (31 U.S.C. 3553).(AUG 1996)

(xii) 52.233-4, Applicable Law for Breach of Contract Claim (Pub. L. 108-77 and 108-78 (19 U.S.C. 3805 note)).(OCT 2004)

(2) Listed below are additional clauses that apply:

(i) 52.232-1, Payments .(APR 1984)

(ii) 52.232-8, Discounts for Prompt Payment .(FEB 2002)

(iii) 52.232-11, Extras .(APR 1984)

(iv) 52.232-25, Prompt Payment (JAN 2017).

(v) 52.232-39, Unenforceability of Unauthorized Obligations .(JUN 2013)

(vi) 52.233-1, Disputes .(MAY 2014)

(vii) 52.244-6, Subcontracts for Commercial Products and Commercial Services .(NOV 2024)

(viii) 52.253-1, Computer Generated Forms .(JAN 1991)

(b) The Contractor shall comply with the following FAR clauses, incorporated by reference, unless the circumstances do not apply:

(1) The clauses listed below implement provisions of law or Executive order:

(i) 52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, (NOV 2023) the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

(ii) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. L. 109-282) (31 U.S.C. 6101 note) (JUN 2020) (Applies to contracts valued at or above the threshold specified in FAR 4.1403(a) on the date of award of this contract).

(iii) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O. 13126) (Applies to contracts for supplies exceeding the (FEB 2024) micro-purchase threshold, as defined in 2.101 on the date of award of this contract).

(iv) 52.222-20, Contracts for Materials, Supplies, Articles, and Equipment., Contracts for Materials, Supplies, Articles, and Equipment (JUN 2020) (41 U.S.C. chapter 65) (Applies to supply contracts over the threshold specified in FAR 22.602 on the date of award of this contract, in the United States, Puerto Rico, or the U.S. Virgin Islands).

(v) 52.222-35, Equal Opportunity for Veterans (38 U.S.C. 4212) (Applies to contracts valued at or above the threshold specified in (JUN 2020) FAR 22.1303(a) on the date of award of this contract).

(vi) 52.222-36, Equal Employment for Workers with Disabilities (29 U.S.C. 793) (Applies to contracts over the threshold specified in (JUN 2020) FAR 22.1408(a) on the date of award of this contract, unless the work is to be performed outside the United States by employees recruited outside the United States). (For purposes of this clause, "United States" includes the 50 States, the District of Columbia, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, and Wake Island.)

(vii) 52.222-37, Employment Reports on Veterans (38 U.S.C. 4212) (Applies to contracts valued at or above the threshold specified in (JUN 2020) FAR 22.1303(a) on the date of award of this contract).

(viii) 52.222-41, Service Contract Labor Standards (41 U.S.C. chapter 67) (Applies to service contracts over $2,500 that are subject to (AUG 2018) the Service Contract Labor Standards statute and will be performed in the United States, District of Columbia, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, Johnston Island, Wake Island, or the outer Continental Shelf).

(ix)

52.222-50, Combating Trafficking in Persons (22 U.S.C. chapter 78 and E.O. 13627) (Applies to all solicitations and contracts).(A) (NOV 2021)

(B) Alternate I (Applies if the Contracting Officer has filled in the following information with regard to applicable directives or (MAR 2015) notices: Document title(s), source for obtaining document(s), and contract performance location outside the United States to which the document applies).

(x) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Applies when 52.222-6 or 52.222-41 are in (JAN 2022) the contract and performance in whole or in part is in the United States (the 50 States, the District of Columbia, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, Johnston Island, Wake Island, and the outer Continental Shelf as defined in the Outer Continental Shelf Lands Act (43 U.S.C. 1331, ))).et seq.

(xi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (E.O. 13706) (Applies when 52.222-6 or 52.222-41 are in the contract (JAN 2022) and performance in whole or in part is in the United States (the 50 States and the District of Columbia.))

(xii) 52.223-5, Pollution Prevention and Right-to-Know Information (42 U.S.C. 11001-11050 and 13101-13109) (Applies to services (MAY 2024) performed on Federal facilities).

(xiii) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (42 U.S.C. 7671, ) (MAY 2024) et seq.

(Applies to contracts for products as prescribed at FAR 23.109(d)(1)).

(xiv) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (42 U.S.C. 7671, (MAY 2024) et seq.

) (Applies to maintenance, service, repair, or disposal of refrigeration equipment and air conditioners).

(xv) 52.223-20, Aerosols (42 U.S.C. 7671, ) (Applies to contracts for products that may contain high global warming potential (MAY 2024) et seq.

hydrofluorocarbons as a propellant or as a solvent; or contracts for maintenance or repair of electronic or mechanical devices).

(xvi) 52.223-21, Foams (42 U.S.C. 7671, ) (Applies to contracts for products that may contain high global warming potential (MAY 2024) et seq.

hydrofluorocarbons or refrigerant blends containing hydrofluorocarbons as a foam blowing agent; or contracts for construction of buildings or facilities.

(xvii) 52.223-23, Sustainable Products and Services (E.O. 14057, 7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. (MAY 2024) 7671l) (Applies to contracts when the agency identifies in the statement of work, or elsewhere in the contract, the sustainable products and services that apply to the acquisition).

(xviii)

52.225-1, Buy American-Supplies (41 U.S.C. chapter 67) (Applies to contracts for supplies, and to contracts for services involving (A) (OCT 2022) the furnishing of supplies, for use in the United States or its outlying areas, if the value of the supply contract or supply portion of a service contract exceeds the micro-purchase threshold, as defined in 2.101 on the date of award of this contract, and the acquisition-

(1) Is set aside for small business concerns; or

(2) Cannot be set aside for small business concerns (see 19.502-2), and does not exceed $50,000).

(B) (OCT 2022) (Applies if the Contracting Officer has filled in the domestic content threshold below, which will apply to the entire Alternate I contract period of performance.