2584_B Addendum 1.pdf

PDF 14 MB Posted Jun 25, 2025

Attached to: #2584-B Justice Center Buildout - Construction
Solicitation number: PE-65600-NONST-2025-000000156
Issued by: Douglas County, Georgia

View the file

Other files

File	Type	Posted
2384_B Justice Center Plans pages 120 to 135.pdf	PDF	Jun 25, 2025
2584_B ITB.pdf	PDF	Jun 25, 2025
2384_B Justice Center Plans pages 1 to 60.pdf	PDF	Jun 25, 2025
2584_B Addendum 2.pdf	PDF	Jun 25, 2025
2384_B Justice Center Plans pages 101 to 119.pdf	PDF	Jun 25, 2025
2384_B Justice Center Plans pages 61 to 100.pdf	PDF	Jun 25, 2025
2384_B Justice Center Plans pages 136 to 162.pdf	PDF	Jun 25, 2025
2584_B ITB.pdf	PDF	May 8, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

IPG, Incorporated Project No. 2312

Renovation of Fayette County Justice Center

ADDENDA 009113 - 1

1.1 ADDENDUM

A. Addendum No. 1

1.2 PROJECT INFORMATION

A. Project Name: Renovation of Fayette County Justice Center

B. Owner: Fayette County Board of Commissioners

C. Architect: IPG, Incorporated.

D. Architect Project Number: 2312

E. Date of Addendum: 6/12/2025

1.3 NOTICE TO BIDDERS

A. This Addendum is issued [to all registered plan holders ]pursuant to the [Instructions to Bidders] [and] [Conditions of the Contract]. This Addendum serves to clarify, revise, and supersede information in the Project Manual, Drawings, and previously issued Addenda.

Portions of the Addendum affecting the Contract Documents will be incorporated into the Contract by enumeration of the Addendum in the Owner/Contractor Agreement.

B. The Bidder shall acknowledge receipt of this Addendum in the appropriate space on the Bid Form.

C. The date for receipt of bids is changed to the following

1. Bid Date: To be announced in Addendum #2.

1.4 ATTACHMENTS

A. This Addendum includes the following attached Documents , Specifications, and Drawings:

1. Document : Custom Soil Resource Report for Clayton, Fayette, and Henry Counties, Georgia

2. Specification Section:

a. Table of Contents

b. 12 36 00 Countertops

3. Drawing Sheets:

a. A2.11 - First Floor Plan New Work

b. A4.12 - Door Schedule

c. A4.14 Aluminum Frames & Storefront

d. A5.00 Interior Elevations

ADDENDA 009113 - 2

e. A5.03 Courtroom Sections

f. A5.04 Courtroom Details

1.5 SPECIFICATION CLARIFICATIONS

A. 10 2113.17 PHENOLIC TOILET COMPARTMENTS

1. Paragraph 2.01 A. Add the following : Scranton Products, www.scrantonproducts.com

1.6 REVISIONS TO SPECIFICATIONS

A. 12 36 00 (new)

1.7 REVISIONS TO DRAWING SHEETS

A. Sheet A2.11 – First Floor Plan New Work (reissued).

1. Delete all work at closets under stair, Equipment Storage 260 & 261. Remove doors 260A & 261A.

B. Sheet A4.12 -Door Schedule (reissued).

1. Removed doors 260A 261A.

2. Existing frames changed to new HM frame at 131A, 134A, 160A, 171D

C. Sheet A4.14 Aluminum Frames & Storefront (reissued).

1. Added storefront type AL-7 which is located First Floor 176-177 Client /Attorney meeting rm. Added safety glazing locations to storefront types

D. Sheet A5.00 Interior Elevations – (reissued).

1. P/A5.00 modified detail per P.2/A5.00

2. P.2/A5.00 section (added)

E. Sheet A5.03 Courtroom Sections – (reissued).

1. Added callout 11/A5.04 to section 4/A5.03

F. Sheet A5.04 Courtroom Details – (reissued).

1. 11/A5.04 crown moulding and apron detail (added).

2. Fixed detail 1/A5.04 scale.

1.6 CLARIFICATIONS TO DRAWING SHEETS

1. SHEET E0.01 – LEGEND, & SCHEDULE - ELECTRICAL

A. Remove the following spaces from the new Lighting Control Panel LC1 – Third Floor

Superior Courts (4 total), Flex Court (1 total). This lighting control panel will control the http://www.scrantonproducts.com/

ADDENDA 009113 - 3

corridors and open, common spaces only. Courtroom lights will be controlled via indi-vidual room controllers in each space.

2. SHEET E2.11 – FIRST FLOOR PLAN – NEW WORK - LIGHTING

A. Magistrate/Probate Flex Court/Hearing 160 – Remove Sheet Note 5 from this space. The new lights shown to be added to this space shall be incorporated with the existing lighting controls currently serving the rest of the lights in this space.

3. SHEET E2.21 – SECOND FLOOR PLAN – NEW WORK – LIGHTING

A. Juvenile Court 446 – In addition to downlights shown provide ten (10) Type DW wall wash can lights similar to Third Floor courtrooms.

B. Juvenile Court 446 – Remove Sheet Note 5 from this space. Space shall be controlled by Current NX Room Controller(s), or approved equal, per Sheet Note 8. Provide 5 zones of dimmable lighting controls in this space. Exact zoning is TBD.

C. Revise Note 6 to read as follows: “Low voltage switch for overriding courtroom room controller described in Note 8.”

4. SHEET E2.31 – THIRD FLOOR PLAN – NEW WORK – LIGHTING

A. Superior Court 563 – Remove Sheet Note 5 from this space. Space shall be controlled by

Current NX Room Controller(s), or approved equal, per Sheet Note 9. Provide 5 zones of

B. Superior Court 571 - Remove Sheet Note 5 from this space. Space shall be controlled by

C. Superior Court 632 - Remove Sheet Note 5 from this space. Space shall be controlled by

D. Superior Court 640 - Remove Sheet Note 5 from this space. Space shall be controlled by

E. Flex Court 654 - Remove Sheet Note 5 from this space. Space shall be controlled by Current NX Room Controller(s), or approved equal, per Sheet Note 9. Provide 5 zones of dimmable lighting controls in this space. Exact zoning is TBD.

F. Revise Note 6 to read as follows: “Low voltage switch for overriding courtroom room con-troller described in Note 9.”

5. Sheet E6.01 – Riser – Electrical

ADDENDA 009113 - 4

A. Add one new lighting control panel (LC1) adjacent to Panel H3. Provide with Integral digital time clock. This control panel shall control all of the general lighting in the corri-dors and open, common spaces (not courtrooms).

END OF DOCUMENT 009113

��	��
��	��

�(/0"#12%3/0*""*2%/14% 5*1+0%�# 1"'*!2% 6*#+7'/

8�	��
��	��

9��:;��<=<>

%$��	��
��	��

��	)�
��)��)��	�)��	��)*

01-�

��	)�
��)��	)��	�)��).

��234�45678972*�

0��

0�� 1��

'01-�* 0��

01-�

��	��
��	��

'0��

�		��
��	��	��

��/##��$.-%0"$"�� "#"��$"#%&0/"�� 1��2� �� 2��

��	��
��	��

!"# ,(�- .&/01�#-��(/��*� 2�"3-�(4 5"3&--&4 "() 6&(13 2�7(-�&/4 8&�1'�"��*9 :;<=:##��(' /"()3 ��";4 � -� > #&10&(- /��#&/��*9 :;2=:##��(' /"()3 ��";4 > -� *+ #&10&(- /��#&/��*� 2&<=2&0�� /"()3 ��";4 � -� > #&10&(- /��#&/��*> 272=2&0��?,1@"( �"() 0�;#�&A4 � -� *+ #&10&(- /��#&/��*B ,.=,1@"( �"()��*�

C��

��"��0��!��"��$��"�%��(!��!��$��!%�!��!�($�%$��$��

1��!��*�� %%��!)��$��#��!��"��2��!��%�� 3456-�7&�456-��)��)�� $�%��%��!��%��!��$�� %��*��*�#��)�%��%��*��!��!��38�9-*�:;;<7&�� %��%�!��"� ��"��!��456-&

1��!��*��!��!��$��!��%� ��)��!��!��!��$��$��

!��%��*��0��*��/��!��$� ��"��))��)��*�,�!��!��!��"��%,� �� *��$��%��!��)!��$��0�!��%�%��3�!��7&� '�0�!��%�%��%�!%� ��&�=�%$��0�!��%�%��$��"�� %�� !��%��"��%��&��0�!��*��$��"��0�!��%� %��"�%��!��!��$��8!��*��#��!��!��$��,�!��!��%$��%��

��

	��
��	��
	��

��	��
	�

��	��
��	��

��

	��
��	��

�		��
	��

�	�
��	��

�	�
��	��

��	��
��	��

��	��
��	��

*+,�,-./0123.45�&06�*0-1+2.-��7.-40-�1..-834+2095�&:;$!��<8=0�23195�>?*�@.40�%�#�&:;$!

A002

*020-9

*+,�;1+B05�%5!C�'(�3D�,-34208�.4�E�,.-2-+32�F$G'H�I�%%HJ�9K002G

)�*+�,�-�. *!�/�+01� "

)�*+�,�-�. *!�2* �"

&3�4'�(��'�� 5��

6+�7�8!

6��7�/*!

9+�0�)-�!

9+�"�:�;�-��""*�

<��=�++0�)-�!

2� :�*++

2�=��>+�7

,��"?��"7�@-

,* ��A8��0

,*"B�++� ��8"�C�!��

/�� *�+�C�!��

D�BE�$8!B��-

)� :0�)-�!

)�=��+0�F��:�:�)-�!

)* E?�+�

)�:*B�)-�!

)!� 0�)-�!

G��0�)!� 0�)-�!

C�!�)-�!

)-�B*�+�2* ��>��!8��"

H�� 5��

)!��@"�� :�9� �+"

��3��'��

D�*+"

� !��"!�!��I*1?7�0"

.)�D�8!�"

,�J��D��:"

2�B�+�D��:"

K�4LM��5�N

��*�+�/?�!�1��-?0

O?��"�*+�"8�=�0"�!?�!�B�@-�*"��0�8��$��7��@�--�:��!�

PQRSTSSSU

C�� * 1Q�)�*+�,�-�@�0� �!�V��=�+*:��!�!?*"�"B�+�U

F +��1�@� !��@�-"�V�0� :�!?��"B�+��@�--* 1�B� �B�8"��

@*"8 :��"!� :* 1��!?��:�!�*+��@�--* 1�� :��BB8��B0��"�*+�

+* ��-+�B�@� !U�O?��@�-"�:�� !�"?�7�!?��"@�++��"�� B� !��"!* 1�"�*+"�!?�!�B�8+:�?�=��V�� "?�7 ��!��@��:�!�*+�:� "B�+�U

/+��"��+0�� !?��V��"B�+�� B?�@�-�"?��!��@�-� @��"8��@� !"U

)�8�B��,�-Q�W�!8��+�D�"�8�B�"�9� "��=�!*� �)��=*B� C�V�)�*+�)8�=�0�.D2Q�

9��:* �!��)0"!�@Q�C�V�,��B�!��#F/)<QXYZ[%

,�-"��@�!?��C�V�)�*+�)8�=�0��V�"�:�� !?��C�V�,��B�!�� -��J�B!*� T�7?*B?�-��"��=�"�:*��B!*� �� :�"?�-��V8!�:*"!��!"� :*"!� B�� :��U��-��J�B!*� �!?�!�-��"��=�"��T�"8B?��"�!?�� +V��"��\8�+]��B� *B�-��J�B!*� T�"?�8+:�V��8"�:�*��@��

�BB8��!��B�+B8+�!*� "��:*"!� B��\8*��:U

O?*"�-��:8B!�*"�1� ��!�:��@�!?��.);�]WD9)�B��!*�*�:�:�!��"�

��!?��=��"*� �:�!�#"%�+*"!�:�V�+�7U

)�*+�)8�=�0��Q�9+�0!� T�>�0�!!�T�� :�I� �0�9�8 !*�"T� <��1*�

)8�=�0��;�!�Q�G��"*� �PYT�)�-�PPT�RSR̂

)�*+�@�-�8 *!"��+�V�+�:�#�"�"-�B��++�7"%��@�-�"B�+�"�

PQZSTSSS��+��1��U

;�!�#"%��*�+�*@�1�"�7��-?�!�1��-?�:Q�,��PST�RSRR_�-��

RST�RSRR

O?��!?�-?�!��!?��V�"��@�-�� 7?*B?�!?��"�*+�+* �"�7��

B�@-*+�:�� :�:*1*!*̀�:�-��V�V+0�:*��"��@�!?��V�BE1��8 :�

98"!�@�)�*+�D�"�8�B��D�-��!

010 2134

��5 �� !"#$%!&'#�(%�)#,#+(#63#

317 31,4

5-� 5-/ �#$%!&'#�(%�)#*#+(#,#

,81, 961*4

5:5 5-/ �;<.=%!#�%!&#/(��->)#*#+(# 63#�-./-!+#$�(�-$

21? 63164

<@ <.=%!#�%!& 613 61*4

A�� BCDE FGGDGH

��I ��

JK-#�%�#:! +$#&-� !-%+-&#(!#+K-#&-+% �-&#$( �#�%�$# !#%#$( �#$:.L-'#.-�.-$-!+#+K-# $( �$#(.#� $/-��%!-(:$#%.-%$# !#+K-#$:.L-'#%.-%1#JK-#�%�#:! +#&-$/. �+ (!$)#%�(!"# M +K#+K-#�%�$)#/%!#=-#:$-&#+(#&-+-.� !-#+K-#/(��($ + (!#%!&#�.(�-.+ -$#(N#%#:! +1

�%O(.#P !&$#(N#$( �#(.#� $/-��%!-(:$#%.-%$1#�#�%�#:! +# $# &-!+ N -&#%!&#!%�-&# %//(.& !"#+(#+K-#+%>(!(� /#/�%$$ N /%+ (!#(N#+K-#&(� !%!+#$( �$1#Q +K !#%#+%>(!(� /# /�%$$#+K-.-#%.-#�.-/ $-�'#&-N !-&#� � +$#N(.#+K-#�.(�-.+ -$#(N#+K-#$( �$1#R!#+K-# �%!&$/%�-)#K(M-L-.)#+K-#$( �$#%.-#!%+:.%�#�K-!(�-!%)#%!&#+K-'#K%L-#+K-#

/K%.%/+-. $+ /#L%. %= � +'#(N#%��#!%+:.%�#�K-!(�-!%1#JK:$)#+K-#.%!"-#(N#$(�-#

(=$-.L-&#�.(�-.+ -$#�%'#->+-!&#=-'(!&#+K-#� � +$#&-N !-&#N(.#%#+%>(!(� /#/�%$$1# �.-%$#(N#$( �$#(N#%#$ !"�-#+%>(!(� /#/�%$$#.%.-�')# N#-L-.)#/%!#=-#�%��-&#M +K(:+# !/�:& !"#%.-%$#(N#(+K-.#+%>(!(� /#/�%$$-$1#5(!$-S:-!+�')#-L-.'#�%�#:! +# $#�%&-#

:�#(N#+K-#$( �$#(.#� $/-��%!-(:$#%.-%$#N(.#MK /K# +# $#!%�-&#%!&#$(�-#� !(.#

/(��(!-!+$#+K%+#=-�(!"#+(#+%>(!(� /#/�%$$-$#(+K-.#+K%!#+K($-#(N#+K-#�%O(.#$( �$1

T($+#� !(.#$( �$#K%L-#�.(�-.+ -$#$ � �%.#+(#+K($-#(N#+K-#&(� !%!+#$( �#(.#$( �$# !#+K-#

�%�#:! +)#%!&#+K:$#+K-'#&(#!(+#%NN-/+#:$-#%!&#�%!%"-�-!+1#JK-$-#%.-#/%��-&#

!(!/(!+.%$+ !")#(.#$ � �%.)#/(��(!-!+$1#JK-'#�%'#(.#�%'#!(+#=-#�-!+ (!-&# !#%#

�%.+ /:�%.#�%�#:! +#&-$/. �+ (!1#R+K-.#� !(.#/(��(!-!+$)#K(M-L-.)#K%L-#�.(�-.+ -$# %!&#=-K%L (.%�#/K%.%/+-. $+ /$#& L-."-!+#-!(:"K#+(#%NN-/+#:$-#(.#+(#.-S: .-#& NN-.-!+#

�%!%"-�-!+1#JK-$-#%.-#/%��-&#/(!+.%$+ !")#(.#& $$ � �%.)#/(��(!-!+$1#JK-'#

"-!-.%��'#%.-# !#$�%��#%.-%$#%!&#/(:�&#!(+#=-#�%��-&#$-�%.%+-�'#=-/%:$-#(N#+K-# $/%�-#:$-&1#U(�-#$�%��#%.-%$#(N#$+.(!"�'#/(!+.%$+ !"#$( �$#(.#� $/-��%!-(:$#%.-%$# %.-# &-!+ N -&#='#%#$�-/ %�#$'�=(�#(!#+K-#�%�$1#VN# !/�:&-&# !#+K-#&%+%=%$-#N(.#%# " L-!#%.-%)#+K-#/(!+.%$+ !"#� !(.#/(��(!-!+$#%.-# &-!+ N -&# !#+K-#�%�#:! +# &-$/. �+ (!$#%�(!"#M +K#$(�-#/K%.%/+-. $+ /$#(N#-%/K1#�#N-M#%.-%$#(N#� !(.# /(��(!-!+$#�%'#!(+#K%L-#=--!#(=$-.L-&)#%!&#/(!$-S:-!+�'#+K-'#%.-#!(+# �-!+ (!-&# !#+K-#&-$/. �+ (!$)#-$�-/ %��'#MK-.-#+K-#�%++-.!#M%$#$(#/(��->#+K%+# +# M%$# ��.%/+ /%�#+(#�%P-#-!(:"K#(=$-.L%+ (!$#+(# &-!+ N'#%��#+K-#$( �$#%!&# � $/-��%!-(:$#%.-%$#(!#+K-#�%!&$/%�-1

5:$+(�#U( �#W-$(:./-#W-�(.+

��
��	��

��	��
��	��

	��
�	��
	��

��	��
	��

�	��
	��
��	��

��	��
��	��

��	��
��	��
�	��(	��

��	��	��
�	��

�	��
�	��

��	��
	��

��	��
	�!"#$%*+,!&!��-	�

��	��
��	��
��	��
�	��	��

��	��
��.	��

��	��/�
	�0��
��	��

��	��	��
�	��	��

��1"2*$&3��

��	��
��	��

��	�	�
�	��

��45�

��	��/�
	�6��
��	��

��,!!"1#,7#"8��

�	�	��	��	��	��
��	��	��
��	��

��	��	��
�	��

��5��

��	��
	��
��	��	��	��

��	�	�
�	��

��45�

��	��
�	��/�
	�0��
��	��

��98:#;;&'&87#,7&:%<'"9*��

��	��
��	��

�	��
	��

��	�	�
�	��

��5�

��	��/�
	�0��
��	��

� ��2#!1&$$,8&"9!%,'&,!��

�	��=	� �	�
��	��

�� !"#�$%&�'%(#! %)*&+"$,%-./01 2$34� !"#,%1567.879667/::.

;3�#%�##(�$%'<3=!'! � !"#,%>>7.87?67@ABC:D

;3�#%�##(�$%�!<% 3&'3<� (<3,%597.87?>7E:0F::D7G

H<") IJ<33%'3<!"K,%L967.87-167EMND

H�<&$�#K%=$�))!J!=� !"#,%OPP7MF:MD7MF:7QF@R:7/MFRPMAE

S''$!#T%�#K%)!&!$�<%)"!$),L667Q:FB:A.

2) !&� 3)%�<3%+�)3K%"#%"+)3<4� !"#)U%K3)=<!' !"#)U%�#K% <�#)3= )%"J% V3%&�'(#! W

X ��Y��

Z�#KJ"<&,[@PPD

Z�#KJ"<&%'")! !"#%\ ]"IK!&3#)!"#�$̂,_̀RR@.

Z�#KJ"<&%'")! !"#%\ V<33IK!&3#)!"#�$̂,aA.:F/P̀b:c7BF:D.

d"]#I)$"'3%)V�'3,e8Ab:f S=<"))I)$"'3%)V�'3,e8Ab:f g�<3# %&� 3<!�$,h:D@È R̀7i:M.C:F:E7/F8R70FMA@.:7MAE70A:@DD7MAEj8F7F:D@È R̀7 i:M.C:F:E7/F8R7DBC@D.

k�� Y��

S'%I%l% "%m%!#=V3),%DMAEN7P8MR nS%I%m% "%op%!#=V3),%DMAEN7BPMN7P8MR n %I%op% "%qr%!#=V3),%DMAEN7BPMN ns%I%qr% "%pp%!#=V3),%DMAEN7BPMN7P8MR s%I%pp% "%tl%!#=V3),%DMAEN7BPMN7P8MR u

��v�� w$"'3,-7.87?7Q:FB:A.

d3' V% "%<3) <!= !43%J3� (<3,x8F:7.CMA7y67@ABC:D d<�!#�T3%=$�)),z:PP7EFM@A:E s�'�=! *%"J% V3%&") %$!&! !#T%$�*3<% "% <�#)&! %]� 3<%\{)� ̂,x8E:FM.:PN7C@0C7.87C@0C7 |6}5~7.87L}9y7@AjCF� d3' V% "%]� 3<% �+$3,x8F:7.CMA7y67@ABC:D H<3�(3#=*%"J%J$""K!#T,�8A:

H<3�(3#=*%"J%'"#K!#T,�8A:

S4�!$�+$3%]� 3<%)(''$*U%l% "%tl%!#=V3),%x8E:FM.:7|M�8̀.7y}97@ABC:D�

Z�#K%=�'�+!$! *%=$�))!J!=� !"#%\!<<!T� 3K̂,%�8A:7DQ:B@/@:E

Z�#K%=�'�+!$! *%=$�))!J!=� !"#%\#"#!<<!T� 3K̂,%-:

�*K<"$"T!=%w"!$%�<"(',%� 2="$"T!=�$%)! 3,%GL1?��y-6�O7�7OB@E@B7̀QPMAE7/8F:D.c7R8@D.

�*K<!=%)"!$%<� !#T,%�8 è D.8R7_8@P7h:D8̀FB:7h:Q8F.

. /0��(!1234*546334+77* 8/��!��$� !#9/:�#��(!--4*54;34<=>?7@ 8/��!��$� !��9!�/"#/9��$9/(!264*54;-4A7,B77@4C

D9�%�EF9//!#/9��G(!H634*54)134AIJ@

D�9" ��G!: �%%�F�:��(!CIBKLI=A45+4@*I*7M<A74<KN5B*I=>7

O## ��P!��G!%�"� �9!%�� %(H334N7B>7=* .%��"��/%!�9/!'�%/G!��!�'%/90��%Q!G/%:9�#��%Q!��G!�9��%/:�%!�F!�R/!"�#$��S

T� �� U ��

V��GF�9"(W<LL@

V��GF�9"!#�%��!X�Y�EG�"/�%�� Z([I>\@L5N7

V��GF�9"!#�%��!X�R9//EG�"/�%�� Z(]<A74@L5N7

�̂Y�E% �#/!%R�#/(_5=̀7a O:9�%%E% �#/!%R�#/(_5=̀7a b�9/��!"��/9�� (c7@<AddK4M7I*?7B7A4+B5K4,BI=<*74I=A4,=7<@@4I=Ae5B4B7@<AddK4 M7I*?7B7A4+B5K4@>?<@* f �� U�� O#!E!g!��!h!��:R/%(!@I=AJ4L5IK iO!E!h!��!jk!��:R/%(!@I=AJ4>LIJ4L5IK i�!E!jk!��!lm!��:R/%(!@I=AJ4>LIJ in!E!lm!��!kk!��:R/%(!@I=AJ4>LIJ4L5IK n!E!kk!��!og!��:R/%(!@I=AJ4>LIJ4L5IK p�� qr�� s �#/(;4*54H34N7B>7=* /̂#�R!��!9/%�9�:��0/!F/��$9/(t5B74*?I=4u34<=>?7@ 9̂��P/!: �%%(v7LL4ABI<=7A n�#�:��&!�F!�R/!"�%�! �"��P! �&/9!��!�9��%"��!Y��/9!Xw%��Z(t5A7BI*7LJ4?<,?4*54?<,?4 x3y2z4*54Hy6u4<=e?B{

/̂#�R!��!Y��/9!��' /(t5B74*?I=4u34<=>?7@ D9/|$/�:&!�F!F ��G��P(}5=7 D9/|$/�:&!�F!#��G��P(}5=7 O0�� ' /!Y��/9!%$## &Q!g!��!og!��:R/%(!t5A7BI*74xI~5d*4uy64<=>?7@{

�� r�

V��G!:�#�'� ��&!: �%%�F�:��!X�99�P��/GZ(!}5=74@N7><+<7A

V��G!:�#�'� ��&!: �%%�F�:��!X��99�P��/GZ(!17

�&G9� �P�:!s�� !�9�$#(![ .:� �P�:� !%��/(!CH1;��u)3��4�4�><A<>4dNLI=A4+5B7@*�4K5<@* �&G9�:!%�� !9��P(!}5

_d@*5K4]5<L4c7@5dB>74c7N5B*

,�-.��' (//0120345//06771 8-�� #�� "9-:�"��' 550120;/0<*=>7?

8-�� #�� 9 �-!"-9��#9-' @A0120;50B7CD77?0E

F9�$�GH9-- "-9��I' 3A/0120(J/0BKL?

F�9!��I :��$$�H�:��' MNN0KD7K?0KD70+D<O706KDONK*B

P-:�� I $�!��9 $��$'3//0+7D=7*1 ,$��!��-$ �9- &�$-I �� &$-9.��$Q I-$:9�"��$Q ��I �9��$-:�$ �H �R- !�"#��S

T�� U��

V��IH�9!'W<NN?

V��IH�9! "�$�� X�Y�GI�!-�$��Z'[\OO<1

V��IH�9! "�$�� X�R9--GI�!-�$��Z']*17D6N\)7

�̂Y�G$��"- $R�"-'_2*)7̀ a:9�$$G$��"- $R�"-'_2*)7̀ b�9-�� !��-9��'c7?<B\\O0d7K1>7D7B06D2O0CDK*<170K*B0C*7<??0K*Be2D0D7?<B\\O0 d7K1>7D7B06D2O0?=><?1 f�� U�� a" G g �� h ��:R-$' ?K*BL0N2KO i� G h �� jk ��:R-$' ?K*BL0=NKL P G jk �� lg ��:R-$' N2KO m� ��no �� p��"-'(0120;0+7D=7*1 -̂"�R �� 9-$�9�:��.- H-��#9-'q2D701>K*0r/0<*=>7?

9̂��s- :��$$'t7NN0BDK<*7B P�"�:��% �H �R- !�$� ��!��s ��%-9 �� 9��$!�� Y��-9 Xu$��Z'q2B7DK17NL0><C>0120><C>0 v/w@x01203wAr0<*e>Dy

-̂"�R �� Y��-9 ��&�-'q2D701>K*0r/0<*=>7?

F9-z#-�:% �H H��I��s'{2*7 F9-z#-�:% �H "��I��s'{2*7 a.��&�- Y��-9 $#""�%Q g �� lg ��:R-$' q2B7DK170vK|2\10xwJ0<*=>7?y o�� V��I :�"�&��% :��$$�H�:�� X�99�s��-IZ' {2*70?+7=<6<7B V��I :�"�&��% :��$$�H�:�� X��99�s��-IZ' (7 �%I9��s�: p�� 9�#"' � ,:��s�:�� $��-' E3J;��r(/�M0�0M=<B<=0\+NK*B062D7?140O2<?1 �%I9�: $�� 9��s' {2

_\?12O0[2<N0c7?2\D=70c7+2D1

0"12�� !*#+334564789334:;;5 <1�!#�!!&�"#%=1>�%�� !*#994564/34?-@A;B

<1�!#�!!&�"#��=#�1$%1=��&=1*#CD4564/94E;FG;;B4H

I= '�JK=11#%1=� L*#7D34564+M34ENOB

I�=$"�!L#>"�''�K�>�� !*#P654.G?Q;4:NGQRN-E

S1>�"#�!L#'�$�"�=#' �"'*/C4.;G@;-5

T=)�!#"�!L*MC4.;G@;-5

0'��$��1'#�=1#)�'1L# !# )'1=2�� !'U#L1'>=�%�� !'U#�!L#�=�!'1>�'# K#�V1#$�%&!��W

X�� Y

Z�!LK =$*[?RRB

Z�!LK =$#% '�� !#\�] JL�$1!'� !�"̂*_̀QQ?5

Z�!LK =$#% '�� !#\�V=11JL�$1!'� !�"̂*a-5;G:R̀,;

b ]!J'" %1#'V�%1*c6-,;d e>= ''J'" %1#'V�%1*c6-,;d f�=1!�#$��1=��"*g;B?È Q̀4h;N5A;G;E4:G6Q4FGN-?5;4N-E4F-;?BB4N-Ei6G4G;B?È Q̀4 h;N5A;G;E4:G6Q4B@A?B5 jk�� Y�� e%#J#l#� #m#�!>V1'*#BN-EO4R6NQ n�#J#m#� #op#�!>V1'*#BN-EO4@RNO S#J#op#� #ql#�!>V1'*#R6NQ r �� s�� t" %1*+4564734.;G@;-5 b1%�V#� #=1'�=�>��21#K1��&=1*u6G;45AN-4v34?-@A;B b=��!�w1#>"�''*x;RR4EGN?-;E S�%�>��(# K#�V1#$ '�#"�$��!w#"�(1=#� #�=�!'$��#]��1=#\y'��̂*u6E;GN5;RO4A?FA4564A?FA4 z3{C|45647{Dv4?-iAG} b1%�V#� #]��1=#��)"1*u6G;45AN-4v34?-@A;B I=1~&1!>(# K#K" L�!w*P6-;

I=1~&1!>(# K#% !L�!w*P6-;

e2��"�)"1#]��1=#'&%%"(U#l#� #ql#�!>V1'*#u6E;GN5;4zN�6̀54|{M4?-@A;B}

��	�	��
�	��

Z�!L#>�%�)�"��(#>"�''�K�>�� !#\�==�w��1L̂*#P6-;4B.;@?:?;E Z�!L#>�%�)�"��(#>"�''�K�>�� !#\! !�==�w��1L̂*#M;

�(L= " w�>#t �"#�= &%*#� 0> " w�>�"#'��1*#H7M/��v+3��4�4�@?E?@4̀.RN-E4:6G;B584Q6?B5 �(L=�>#' �"#=��!w*#P6 c̀ B56Q4_6?R4g;B6̀G@;4g;.6G5

&��'()'�)*�+'*,-',.�)/�0'1*�� 2%$3"4��56%786$�7#"9�:6;"#

?0@A)-0�0B,�,'C)-�0++,/,-0',�@)D,**,E0'�AF�)G�%"�4!"$282"9

?0@A)-0�0B,�,'C)-�0++,/,-0',�@)D@�@,**,E0'�AF�)H4

ICA*,-)+�,�)*0',@E�)G�

��J��

K�� L�M�� N*B0@)�0@A�� !"#$"%� O+',P0'�+)0*�)B0+�A)�@)�B+�*.0',�@+Q)A�+-*,�',�@+Q)0@A)'*0@+�-'+)�/)'(�)P0�1@,'R

S74��5�T�2:�U"4�7#$"�U"!�#�

�H

��	��
��	��

-�0!,!�1�� -� ��2!�!�.

3� !�45*5!�,� 6��

��	�7��	��
�	�!�7!�!�0��
��8��	�

9�� 08�:�;�+*5:<4!

0 �

��3 �� !�='��4<-�455$!�,�

��	��
��	�7��	��
�	�!

0 �

��3	��
!��	��	�6

�4)-�"##"!��

��	�7��	��
�	�!

�-�1!8!-� ��>!#-�"##>!�0� ��

��	�7��	��
�	�!

��3	�
��,�'��!�455&!�8	��

��6�'��

9 ��(�9�� !�455<!��' 9 ��

9��	!�
7!�!�(	�
��	��

��6��A�4)!��@::��!� !��9:��:�� :��:B��C� ��4$"�"D#&$">"�

9 �� !�4555!�� E��@��6 A��

	��'
9	��!�"��	��!�?

��3	��'
�	��,��

9��	-�7!�!�(	�
��	��

��6��A�$<>!��@::

!��9:��:�� :��:B��C� ��4$"�"D#&<&**�

9	��
��!�"#4#!�F	��
E��!�44��	��!�7!�!�(	�
��	��

��3	��'
�	��,��

9�� !��@::

!��9:��:�� :��:B��C� ��4$"�"D#&<&)#�

-�3!8!-�=

!�45)&!�8	��
��(	�

	!�7!�!�0��
��8��	��
9��	�

	�(	�
��	��?

��3	��'
�	��

��2�9� ��-�8 ��

7��	��
�	��

��2�� -�2�9� 6�

�!�45)*!�,� 2��

��	��
��	��

�!�8 ��2E�

��	��
��	��

3 �� G+)*+4!

7��	��
�	��(	�
��	��

��3	��'
�	��,��

9�� !� !��9:��:�� :B��C� ��4$"�"D#&<<*$�

7��	��
�	��(	�
��	��

��3	��'
�	��,��

9�� !�

��6��A!��@::��!� !��9:��:��

:B��C�� 64#$<#)$�

��	��	��	��
��	��	�� !"#$��%&&'''��	��	��&'�	&��&
��	&��&	��	&	��	�	&(��)��	*�+�+,!-�+�+�

��	��	��	��
+!!.��/��	��	��
�0��	��	��	��
��1��2�	��

��3��

+4.��%&&'''��	��	��&'�	&��&��	&��&��&	��	&(
��)��	*�+�+,!- .+��

��	��4.��/��
��		��

��3��+*!��%&&

'''��	��	��&$��&5�6,
7��86�9�&��	*�+�+,!-++4!��

��	��
��	��

TABLE OF CONTENTS TOC - 1

TABLE OF CONTENTS

GENERAL BID DOCUMENTS

SCOPE OF WORK

INFORMATION FOR BIDDERS

AGREEMENT

GENERAL CONDITIONS

SUPPLEMENTAL GENERAL CONDITIONS

SPECIAL CONDITIONS

BID SCHEDULE

DIVISION 1 - PROCUREMENT & CONTRACTING REQUIREMENTS

01 1000 SUMMARY

01 2500 SUBSTITUTION PROCEDURES

01 3000 ADMINISTRATIVE REQUIREMENTS

01 4000 QUALITY REQUIREMENTS

01 5000 TEMPORARY FACILITIES & CONTROLS

01 5100 TEMPORARY UTILITIES

01 6000 PRODUCT REQUIREMENTS

01 7700 CLOSEOUT PROCEDURES

DIVISION 2 – EXISTING CONDITIONS

02 0342 REMOVAL & SALVAGE OF PERIOD CONSTRUCTION MATERIALS

02 4100 DEMOLITION CLEANING AND GRUBBING

DIVISION 4 - MASONRY

04 2600 SINGLE-WYTHE UNIT MASONRY

DIVISION 5 – METALS

05 4000 COLD FORMED METAL FRAMING

DIVISION 6 – WOOD, PLASTICS, COMPOSITES

06 1000 ROUGH CARPENTRY

06 2000 FINISH CARPENTRY

06 4100 ARCHITECTURAL WOOD CASEWORK

06 4200 WOOD PANELING

DIVISION 7 – THERMAL & MOISTURE PROTECTION

07 9200 JOINT SEALANTS

DIVISION 8 - OPENINGS

08 1113 HOLLOW METAL DOORS & FRAMES

08 1416 FLUSH WOOD DOORS

08 3463 SECURITY HOLLOW METAL DOORS & FRAMES

08 4313 ALUMINUM FRAMED STOREFRONTS

087100 DOOR HARDWARE

08 7163

08 8000 08 8853

SECURITY HARDWARE

GLAZING

SECURITY GLASS & GLAZING

ADDENDA 1 6/12/2025

TABLE OF CONTENTS TOC - 2

DIVISION 9 – FINISHES

09 0561 COMMON WORK RESULTS FOR FLOORING PREPARATION

09 2116 GYPSUM BOARD ASSEMBLIES

09 3000 TILING

09 5100 ACOUSTICAL CEILINGS

09 6500 RESILIENT FLOORING

09 6813 TILE CARPETING

09 9000 PAINTING & COATING – COMMERCIAL FACILITY GUIDE

09 9300 STAINING & TRANSPARENT FINISHING

DIVISION 10 – SPECIALTIES

10 2113.17 PHENOLIC TOILET COMPARTMENTS

10 2600 WALL & DOOR PROTECTION

10 2800 TOILET, BATH, & LAUNDRY ACCESSORIES

10 4400 FIRE PROTECTION SPECIALTIES

DIVISION 12 – FURNISHINGS

12 3600 COUNTERTOPS – ADD 1

DIVISION 21 - FIRE SUPPRESSION

21 0510 GENERAL FIRE SUPPRESSION REQUIREMENTS

21 1100 FIRE SUPPRESSION PIPING

21 1200 FIRE-SUPPRESSION STANDPIPES

21 1300 FIRE-SUPPRESSION SPRINKLER SYSTEMS

21 2200 TOTAL FLOODING (CLEAN AGENT) EXTINGUISHING SYSTEM

DIVISION 22 - PLUMBING

22 0510 GENERAL PLUMBING REQUIREMENTS

22 0519 METERS AND GAUGES FOR PLUMBING PIPING

22 0553 IDENTIFICATION FOR PLUMBING PIPING AND EQUIPMENT

22 0719 PLUMBING PIPING INSULATION

22 1005 PLUMBING PIPING

22 1006 PLUMBING PIPING SPECIALTIES

22 3000 PLUMBING EQUIPMENT

22 4010 PLUMBING FIXTURES

DIVISION 23 - HEATING, VENTILATING, AND AIR-CONDITIONING (HVAC)

23 0510 GENERAL MECHANICAL REQUIREMENTS

23 0513 MOTORS FOR HVAC EQUIPMENT

23 0514 VARIABLE FREQUENCY CONTROLLERS

23 0548 VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND EQUIPMENT

23 0553 IDENTIFICATION FOR HVAC PIPING AND EQUIPMENT

23 0593 TESTING, ADJUSTING AND BALANCING FOR HVAC

23 0713 DUCT INSULATION

23 0719 HVAC PIPING INSULATION

23 0913 INSTRUMENTATION AND CONTROL DEVICES FOR HVAC

23 0923 DIRECT-DIGITAL CONTROL SYSTEM FOR HVAC

23 0994 HVAC SEQUENCE OF OPERATION

23 3100 HVAC DUCTS AND CASINGS

23 3300 AIR DUCT ACCESSORIES

23 3423 HVAC POWER VENTILATORS

23 3600 AIR TERMINAL UNITS

23 3700 AIR OUTLETS AND INLETS

TABLE OF CONTENTS TOC - 3

23 4000 HVAC AIR CLEANING DEVICES

23 7423 PACKAGED ROOF TOP AIR CONDITIONING UNITS - VAV

DIVISION 26 - ELECTRICAL

26 0505 SELECTIVE DEMOLITION FOR ELECTRICAL

26 0510 GENERAL ELECTRICAL REQUIREMENTS

26 0519 LOW-VOLTAGE ELECTRICAL POWER CONDUCTORS AND CABLES

26 0526 GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS

26 0529 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS

26 0533.13 CONDUIT FOR ELECTRICAL SYSTEMS

26 0533.16 BOXES FOR ELECTRICAL SYSTEMS

26 0553 IDENTIFICATION FOR ELECTRICAL SYSTEMS

26 0573 PROTECTIVE DEVICE COORDINATION STUDY

26 0583 WIRING CONNECTIONS

26 2416 PANELBOARDS

26 2417 SURGE PROTECTIVE DEVICES (SPDS)

26 2726 WIRING DEVICES

26 2813 FUSES

26 2816.16 ENCLOSED SWITCHES

26 5100 INTERIOR LIGHTING

26 5200 SENSOR LIGHTING CONTROLS

DIVISION 27 - COMMUNICATIONS

27 0000 COMMUNICATIONS

27 0510 FIRESTOPPING FOR COMMUNICATIONS SYSTEMS

27 0526 GROUNDING & BONDING FOR COMMUNICATIONS SYSTEMS

27 0528 PATHWAYS FOR COMMUNICATIONS SYSTEMS

27 0543 UNDERGROUND DUCTS & RACEWAYS FOR COMM SYSTEMS

27 0553 ID FOR COMMUNICATIONS SYSTEMS

27 0800 COMMISSIONING OF COMMUNICATIONS

27 1113 COMMUNICATIONS ENTRANCE PROTECTION

27 1116 COMMUNICATIONS CABINETS, RACKS, & ENCLOSURES

27 1119 COMMUNICATIONS PATCH PANELS

27 1123 COMMUNICATIONS CABLE MANAGEMENT & LADDER RACK

27 1126 COMMUNICATIONS RACK-MOUNTED POWER DISTRIBUTION

27 1323 COMMUNICATIONS OPTICAL FIBER BACKBONE CABLING

27 1513 COMMUNICATIONS COPPER HORIZONTAL CABLING

27 1543 COMMUNICATIONS FACEPLATES & CONNECTORS

27 1619 COMMUNICATIONS PATCH CHORDS & WORKSTATION CORDS

DIVISION 28 – ELECTRONIC SAFETY & SECURITY

28 0300 IP VIDEO SURVEILLANCE

DIVISION 31 – EARTHWORK

311100 SITE CLEARING

312000 EARTHWORK

312500 EROSION AND SEDIMENTATION CONTROL

DIVISION 32 – EXTERIOR IMPROVEMENTS

321216 ASPHALTIC CONCRETE PAVING

Countertops 123600 - 1

SECTION 123600

COUNTERTOPS

PART 1 GENERAL

1.01 SECTION INCLUDES

A. Countertops for architectural cabinet work.

1.02 REFERENCE STANDARDS

A. ASTM B211/B211M - Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire; 2019.

B. AWI/AWMAC/WI (AWS) - Architectural Woodwork Standards, 2nd Edition; 2014, with Errata (2016).

C. ISFA 2-01 - Classification and Standards for Solid Surfacing Material; 2013.

D. NEMA LD 3 - High-Pressure Decorative Laminates; 2005.

E. PS 1 - Structural Plywood; 2023.

1.03 SUBMITTALS

A. See Section 013000 - Administrative Requirements for submittal procedures.

B. Product Data: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Specimen warranty.

C. Shop Drawings: Complete details of materials and installation ; combine with shop drawings of cabinets and casework specified in other sections.

D. Verification Samples: For each finish product specified, minimum size 6 inches (150

mm) square, representing actual product, color, and patterns.

E. Test Reports: Chemical resistance testing, showing compliance with specified requirements.

1.04 QUALITY ASSURANCE

A. Installer Qualifications: Company specializing in performing work of the type specified in this section, with not less than three years of documented experience.

Countertops 123600 - 2

1.05 DELIVERY, STORAGE, AND HANDLING

A. Store products in manufacturer's unopened packaging until ready for installation.

B. Store and dispose of solvent-based materials, and materials used with solvent-based materials, in accordance with requirements of local authorities having jurisdiction.

1.06 FIELD CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

PART 2 PRODUCTS

2.01 COUNTERTOPS

A. Plastic Laminate Countertops: High-pressure decorative laminate (HPDL) sheet bonded to substrate.

1. Laminate Sheet, Type ___: NEMA LD 3, Grade HGS, 0.048 inch (1.2 mm) nominal thickness.

a. Manufacturers:

1) Formica Corporation; _______: www.formica.com/#sle.

2) Wilsonart; _____: www.wilsonart.com/#sle.

b. Surface Color and Pattern: As selected by Architect from the manufacturer's full line.

2. Exposed Edge Treatment: Square, substrate built up to minimum 1-1/4 inch (32

mm) thick; covered with matching laminate.

3. Back and End Splashes: Same material, same construction.

B. Solid Surfacing Countertops: Solid surfacing sheet or plastic resin casting over continuous substrate.

1. Flat Sheet Thickness: 3/4 inch (12 mm), minimum.

2. Solid Surfacing Sheet and Plastic Resin Castings: Complying with ISFA 2-01 and NEMA LD 3; acrylic or polyester resin, mineral filler, and pigments;

homogenous, non-porous and capable of being worked and repaired using standard woodworking tools; no surface coating; color and pattern consistent throughout thickness.

a. Manufacturers:

1) Formica Corporation; _____: www.formica.com/#sle.

2) Wilsonart; _____: www.wilsonart.com/#sle.

b. Finish on Exposed Surfaces: Matte, gloss rating of 5 to 20.

c. Color and Pattern: As selected by Architect from manufacturer's full line.

3. Other Components Thickness: 1/2 inch (12 mm), minimum.

4. Exposed Edge Treatment: Built up to minimum 1-1/4 inch (32 mm) thick;

radiused edge; use marine edge at sinks.

5. Back and End Splashes: Same sheet material, square top; minimum 4 inches

(102 mm) high.

Countertops 123600 - 3

2.02 MATERIALS

A. Extruded Aluminum: ASTM B211/B211M, 6463 alloy, T5 temper.

B. Wood-Based Components:

1. Wood fabricated from old growth timber is not permitted.

C. Plywood for Supporting Substrate: PS 1 Exterior Grade, A-C veneer grade, minimum 5-ply; minimum 3/4 inch (19 mm) thick; join lengths using metal splines.

D. Adhesives: Chemical resistant waterproof adhesive as recommended by manufacturer of materials being joined.

E. Joint Sealant: Mildew-resistant silicone sealant, clear.

2.03 FABRICATION

A. Fabricate tops and splashes in the largest sections practicable, with top surface of joints flush.

1. Join lengths of tops using best method recommended by manufacturer.

2. Fabricate to overhang fronts and ends of cabinets 1 inch (25 mm) except where top butts against cabinet or wall.

3. Prepare all cutouts accurately to size; replace tops having improperly dimensioned or unnecessary cutouts or fixture holes.

B. Provide back/end splash wherever counter edge abuts vertical surface unless otherwise indicated.

1. Secure to countertop with concealed fasteners and with contact surfaces set in waterproof glue.

2. Height: 4 inches (102 mm), unless otherwise indicated.

C. Solid Surfacing: Fabricate tops and wall panels up to 144 inches (3657 mm) long in one piece; join pieces with adhesive sealant in accordance with manufacturer's recommendations and instructions.

PART 3 EXECUTION

3.01 EXAMINATION

A. Do not begin installation until substrates have been properly prepared.

B. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

C. Verify that wall surfaces have been finished and mechanical and electrical services and outlets are installed in proper locations.

Countertops 123600 - 4

3.02 INSTALLATION

A. Securely attach countertops to cabinets using concealed fasteners. Make flat surfaces level; shim where required.

B. Attach plastic laminate countertops using screws with minimum penetration into substrate board of 5/8 inch (16 mm).

C. Seal joint between back/end splashes and vertical surfaces.

3.03 TOLERANCES

A. Variation From Horizontal: 1/8 inch in 10 feet (3 mm in 3 m), maximum.

B. Offset From Wall, Countertops: 1/8 inch (3 mm) maximum; 1/16 inch (1.5 mm) minimum.

C. Field Joints: 1/8 inch (3 mm) wide, maximum.

3.04 CLEANING

A. Clean countertops surfaces thoroughly.

3.05 PROTECTION

A. Protect installed products until completion of project.

B. Touch-up, repair or replace damaged products before Date of Substantial Completion.

END OF SECTION 123600

BID DOCUMENTS

architects & planners IPG, Incorporated

807 Northwood Park Drive Valdosta, Georgia 31602

T: 229.242.3557 F: 229.242.4339

E: mail@ipgarchitects.com www.ipgarchitects.com

R D

, F

E, G

FAYETTE COUNTY

RENOVATION

JUSTICE CENTER

Fayetteville, GA

A2.11

FIRST FLOOR

PLAN

NEW WORK

FIRST FLOOR PLAN

LEGENDGENERAL NOTES

AutoCAD SHX Text

PASS-THRU

AutoCAD SHX Text

STEP

AutoCAD SHX Text

6" STEP

AutoCAD SHX Text

6" STEP

AutoCAD SHX Text

6" STEP

AutoCAD SHX Text

JUDGE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

GENERAL OFFICE

AutoCAD SHX Text

COURT SERVICES

AutoCAD SHX Text

COMM

AutoCAD SHX Text

GENERAL OFFICE

AutoCAD SHX Text

PROBATE

AutoCAD SHX Text

RECEPTION

AutoCAD SHX Text

RECEPTION

AutoCAD SHX Text

CONF.

AutoCAD SHX Text

RECEPTION

AutoCAD SHX Text

CONFERENCE

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

CONSTABLE

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

FLEX COURT/HEARING ROOM

AutoCAD SHX Text

MAGISTRATE/PROBATE

AutoCAD SHX Text

JURY

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

MAGISTRATE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

CONF

AutoCAD SHX Text

CONFERENCE

AutoCAD SHX Text

CLERK OF COURT

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

SHOP

AutoCAD SHX Text

REPAIR

AutoCAD SHX Text

STO.

AutoCAD SHX Text

TLT

AutoCAD SHX Text

MENS

AutoCAD SHX Text

AutoCAD SHX Text A4.00

AutoCAD SHX Text

BAILIFF

AutoCAD SHX Text

CLERK

AutoCAD SHX Text

JUDGE

AutoCAD SHX Text

WITNESS

AutoCAD SHX Text

ADMIN

AutoCAD SHX Text

MAGISTRATE

AutoCAD SHX Text

TOILET

AutoCAD SHX Text

RE/ZA/RC/JB

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

JOB #

AutoCAD SHX Text

DATE

AutoCAD SHX Text

REV.

AutoCAD SHX Text

REV.

AutoCAD SHX Text

REV.

AutoCAD SHX Text

REV.

AutoCAD SHX Text or reused without permission and credit.

AutoCAD SHX Text Architect and may not be reproduced

AutoCAD SHX Text IPG, Incorporated. 2025

AutoCAD SHX Text These drawings are the property of the

AutoCAD SHX Text c

AutoCAD SHX Text

14APRIL2025

AutoCAD SHX Text T

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text I

AutoCAD SHX Text H

AutoCAD SHX Text C

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text

ROBERT F. EVANS, JR.

AutoCAD SHX Text C

AutoCAD SHX Text R

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text O

AutoCAD SHX Text R

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text T

AutoCAD SHX Text I

AutoCAD SHX Text F

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text o.

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

WORKROOM

AutoCAD SHX Text

WITNESS

AutoCAD SHX Text

CONF

AutoCAD SHX Text

CHILD

AutoCAD SHX Text

INTERVIEW

AutoCAD SHX Text

WOMEN

AutoCAD SHX Text

MEN

AutoCAD SHX Text

TLT

AutoCAD SHX Text

TLT

AutoCAD SHX Text

STO

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

GENERAL

AutoCAD SHX Text

PROBATE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

HEARING

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

EQUIP.

AutoCAD SHX Text

SECURITY

AutoCAD SHX Text

SECURITY

AutoCAD SHX Text

SECURITY

AutoCAD SHX Text

COMPUTER

AutoCAD SHX Text

WAITING

AutoCAD SHX Text

CORRIDOR

AutoCAD SHX Text

LOBBY

AutoCAD SHX Text

MAIN

AutoCAD SHX Text

WAITING

AutoCAD SHX Text

WAITING

AutoCAD SHX Text

MECHANICAL

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text

TELE/COMM.

AutoCAD SHX Text

TOILET

AutoCAD SHX Text

TOILET

AutoCAD SHX Text

BREAK

AutoCAD SHX Text

MEN

AutoCAD SHX Text

WOMEN

AutoCAD SHX Text

COURT

AutoCAD SHX Text

SUPERIOR

AutoCAD SHX Text

CLERK

AutoCAD SHX Text

TOILET

AutoCAD SHX Text

COURT

AutoCAD SHX Text

SUPERIOR

AutoCAD SHX Text

CLERK

AutoCAD SHX Text

COURT

AutoCAD SHX Text

STATE

AutoCAD SHX Text

CLERK

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

CONFERENCE

AutoCAD SHX Text

ENGINEER

AutoCAD SHX Text

BUILDING

AutoCAD SHX Text

CORRIDOR

AutoCAD SHX Text

VAULT

AutoCAD SHX Text

PROPERTY

AutoCAD SHX Text

RECORDS

AutoCAD SHX Text

CORR

AutoCAD SHX Text

ELEV.

AutoCAD SHX Text

PUMPS

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text

BREAK

AutoCAD SHX Text

TOILET

AutoCAD SHX Text

EQUP.

AutoCAD SHX Text

MAIN

AutoCAD SHX Text

EMERGENCY

AutoCAD SHX Text

WOMEN

AutoCAD SHX Text

VAULT

AutoCAD SHX Text

CORR

AutoCAD SHX Text

JUDGE

AutoCAD SHX Text

JUDGE

AutoCAD SHX Text

WAITING

AutoCAD SHX Text

WAITING

AutoCAD SHX Text

JUDGE

AutoCAD SHX Text

MAGISTRATE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

CHIEF

AutoCAD SHX Text

TLT

AutoCAD SHX Text

TOILET

AutoCAD SHX Text

TOILET

AutoCAD SHX Text

WOMEN

AutoCAD SHX Text

MEN

AutoCAD SHX Text

CORRIDOR

AutoCAD SHX Text

TLT

AutoCAD SHX Text

TOILET

AutoCAD SHX Text

ELEV.

AutoCAD SHX Text

EQUP.

AutoCAD SHX Text

COURT

AutoCAD SHX Text

MAGISTRATE

AutoCAD SHX Text

LOBBY

AutoCAD SHX Text

TOILET

AutoCAD SHX Text

TOILET

AutoCAD SHX Text

HOLDING

AutoCAD SHX Text

HOLDING

AutoCAD SHX Text

HOLDING

AutoCAD SHX Text

CORRIDOR

AutoCAD SHX Text

MEN

AutoCAD SHX Text

WOMEN

AutoCAD SHX Text

WAITING

AutoCAD SHX Text

WAITING

AutoCAD SHX Text

ELEC.

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

CORRIDOR

AutoCAD SHX Text

JANITOR

AutoCAD SHX Text

BREAK

AutoCAD SHX Text

ELECTRICAL

AutoCAD SHX Text

MECHANICAL

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

ELEV.

AutoCAD SHX Text

EQUP.

AutoCAD SHX Text

CORRIDOR

AutoCAD SHX Text

WAITING

AutoCAD SHX Text

WAITING

AutoCAD SHX Text

LOBBY

AutoCAD SHX Text

ELEVATOR

AutoCAD SHX Text

ELEVATOR

AutoCAD SHX Text

ELEVATOR

AutoCAD SHX Text

STAIR

AutoCAD SHX Text

STAIR

AutoCAD SHX Text

ELEVATOR

AutoCAD SHX Text

STAIR

AutoCAD SHX Text

ROOM

AutoCAD SHX Text

MAIL

AutoCAD SHX Text

VAULT

AutoCAD SHX Text

RECORDS

AutoCAD SHX Text

COURT

AutoCAD SHX Text

STAIR

AutoCAD SHX Text

ELEVATOR

AutoCAD SHX Text

WITNESS

AutoCAD SHX Text

WITNESS

AutoCAD SHX Text

GENERAL

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

VAULT

AutoCAD SHX Text

PROBATE

AutoCAD SHX Text

VAULT

AutoCAD SHX Text

PROBATE

AutoCAD SHX Text

VAULT

AutoCAD SHX Text

PROBATE

AutoCAD SHX Text

HOLDING

AutoCAD SHX Text

STAIR

AutoCAD SHX Text

ELEVATOR

AutoCAD SHX Text

CORR

AutoCAD SHX Text

ELEVATOR

AutoCAD SHX Text

STAIR

AutoCAD SHX Text

CLERK

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

VEST.

AutoCAD SHX Text

CORR.

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

MEDIATION

AutoCAD SHX Text

ATTY./CLIENT MTG

AutoCAD SHX Text

STO.

AutoCAD SHX Text

REVIEW

AutoCAD SHX Text

DOC

AutoCAD SHX Text

REVIEW

AutoCAD SHX Text

DOC

AutoCAD SHX Text

MEDIATION

AutoCAD SHX Text

ATTY./CLIENT MTG

AutoCAD SHX Text

WAITING

AutoCAD SHX Text

RECEPTION

AutoCAD SHX Text

WAITING

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

MTG

AutoCAD SHX Text

INMATE

AutoCAD SHX Text

MTG

AutoCAD SHX Text

ATT

AutoCAD SHX Text

STO.

AutoCAD SHX Text

AutoCAD SHX Text 134A

AutoCAD SHX Text 158A

AutoCAD SHX Text 178A

AutoCAD SHX Text 212A

AutoCAD SHX Text 204A

AutoCAD SHX Text 176A

AutoCAD SHX Text 162A

AutoCAD SHX Text 251A

AutoCAD SHX Text 183B

AutoCAD SHX Text 172A

AutoCAD SHX Text 173A

AutoCAD SHX Text 203B

AutoCAD SHX Text 201A

AutoCAD SHX Text 151A

AutoCAD SHX Text 253A

AutoCAD SHX Text 163A

AutoCAD SHX Text 248A

AutoCAD SHX Text 185A

AutoCAD SHX Text 178B

AutoCAD SHX Text 177A

AutoCAD SHX Text 171D

AutoCAD SHX Text 250A

AutoCAD SHX Text 219A

AutoCAD SHX Text 213B

AutoCAD SHX Text 128A

AutoCAD SHX Text 252A

AutoCAD SHX Text 161A

AutoCAD SHX Text 138A

AutoCAD SHX Text 179A

AutoCAD SHX Text 131A

AutoCAD SHX Text 143A

AutoCAD SHX Text 154A

AutoCAD SHX Text 159A

AutoCAD SHX Text 146A

AutoCAD SHX Text 160A

AutoCAD SHX Text

AL-7

AutoCAD SHX Text

AL-9

AutoCAD SHX Text

AutoCAD SHX Text A4.00

AutoCAD SHX Text

AL-7

AutoCAD SHX Text

RELOCATED

AutoCAD SHX Text

WINDOW & COUNTER

AutoCAD SHX Text

SHELVES

AutoCAD SHX Text

RELOCATED VAULT DOOR

AutoCAD SHX Text

AutoCAD SHX Text A4.01

AutoCAD SHX Text

AutoCAD SHX Text A4.01

AutoCAD SHX Text 18'-0"

AutoCAD SHX Text 12'-5"

AutoCAD SHX Text 5'-5"

AutoCAD SHX Text 7'-5"

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text 10'-0"

AutoCAD SHX Text 11'-2"

AutoCAD SHX Text 15'-2"

AutoCAD SHX Text 4'-10"

AutoCAD SHX Text 9'-5"

AutoCAD SHX Text 9'-7"

AutoCAD SHX Text 11'-0"

AutoCAD SHX Text

DESK

AutoCAD SHX Text

DESK

AutoCAD SHX Text 5'-8"

AutoCAD SHX Text 6'-0"

AutoCAD SHX Text 10'-3"

AutoCAD SHX Text 10'-4"

AutoCAD SHX Text 6'-4"

AutoCAD SHX Text 24'-6"

AutoCAD SHX Text

5'-0" CLR.

AutoCAD SHX Text 10'-0"

AutoCAD SHX Text 9'-0"

AutoCAD SHX Text 1'-6"

AutoCAD SHX Text D

AutoCAD SHX Text A5.00

AutoCAD SHX Text B

AutoCAD SHX Text A5.00

AutoCAD SHX Text A

AutoCAD SHX Text A5.00

AutoCAD SHX Text C

AutoCAD SHX Text A5.00

AutoCAD SHX Text F

AutoCAD SHX Text A5.00

AutoCAD SHX Text E

AutoCAD SHX Text A5.00

AutoCAD SHX Text 2.5

AutoCAD SHX Text

AutoCAD SHX Text 1.5

AutoCAD SHX Text

AutoCAD SHX Text 3.5

AutoCAD SHX Text

AutoCAD SHX Text 4.4

AutoCAD SHX Text 4.5

AutoCAD SHX Text

AutoCAD SHX Text 5.5

AutoCAD SHX Text

AutoCAD SHX Text 6.5

AutoCAD SHX Text

AutoCAD SHX Text 7.5

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E.5

AutoCAD SHX Text E

AutoCAD SHX Text D.5

AutoCAD SHX Text D

AutoCAD SHX Text C.5

AutoCAD SHX Text C

AutoCAD SHX Text B.5

AutoCAD SHX Text B

AutoCAD SHX Text A.3

AutoCAD SHX Text A

AutoCAD SHX Text B.3

AutoCAD SHX Text B.7

AutoCAD SHX Text

AutoCAD SHX Text 1.5

AutoCAD SHX Text

AutoCAD SHX Text 2.5

AutoCAD SHX Text

AutoCAD SHX Text 3.5

AutoCAD SHX Text

AutoCAD SHX Text 5.5

AutoCAD SHX Text 6.5

AutoCAD SHX Text

AutoCAD SHX Text 7.5

AutoCAD SHX Text 4.7

AutoCAD SHX Text 4.3

AutoCAD SHX Text 4.8

AutoCAD SHX Text 4.2

AutoCAD SHX Text A.1

AutoCAD SHX Text 3.1

AutoCAD SHX Text A.1

AutoCAD SHX Text 5.9

AutoCAD SHX Text C.7

AutoCAD SHX Text

AutoCAD SHX Text A3.03

AutoCAD SHX Text

RELOCATED

AutoCAD SHX Text

RELOCATED

AutoCAD SHX Text

BAILIFF

AutoCAD SHX Text

JUDGE

AutoCAD SHX Text

WITNESS

AutoCAD SHX Text 5'-5"

AutoCAD SHX Text

3'-6" CLR.

AutoCAD SHX Text 2'-10"

AutoCAD SHX Text 2'-1"

AutoCAD SHX Text

JURY

AutoCAD SHX Text F

AutoCAD SHX Text K

AutoCAD SHX Text 2'-5"

AutoCAD SHX Text 10'-2"

AutoCAD SHX Text 2'-2"

AutoCAD SHX Text 9'-8"

AutoCAD SHX Text 8"

AutoCAD SHX Text 7'-6"

AutoCAD SHX Text 8'-4"

AutoCAD SHX Text 8'-6"

AutoCAD SHX Text 9'-8"

AutoCAD SHX Text 8'-1"

AutoCAD SHX Text 7'-11"

AutoCAD SHX Text

AutoCAD SHX Text 2'

AutoCAD SHX Text 8'

AutoCAD SHX Text 4'

AutoCAD SHX Text 16'

AutoCAD SHX Text 24'

AutoCAD SHX Text

SCALE: 1/8"=1'-0"

AutoCAD SHX Text A2.11

AutoCAD SHX Text

NEW GWB WALL

AutoCAD SHX Text

CMU

AutoCAD SHX Text

NEW DOOR

AutoCAD SHX Text 252A

AutoCAD SHX Text

NEW STOREFRONT

AutoCAD SHX Text

AL-7

AutoCAD SHX Text B

AutoCAD SHX Text

PARTITION TAG

AutoCAD SHX Text INTERIOR DIMENSIONS ARE TO CENTERLINE OF COLUMN, FACE OF STUD, OR FACE OF CMU UNLESS NOTED OTHERWISE. INTERIOR METAL STUD FRAME WALLS ARE PARTITION TYPE "B" UNLESS INDICATED OTHERWISE.. SEE SHEET A5.00 FOR TYPICAL ELEVATION AND DETAIL OF ADJUSTABLE SHELVES AT JANITOR AND STORAGE ROOMS AND OTHER LOCATIONS NOTED ON THE DRAWINGS.

AutoCAD SHX Text 1.

AutoCAD SHX Text 2.

AutoCAD SHX Text 3.

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

OFFICE

AutoCAD SHX Text

FE-2

AutoCAD SHX Text

FE-1

AutoCAD SHX Text

CABINET MOUNTED

AutoCAD SHX Text

BRACKET MOUNTED

AutoCAD SHX Text

FIRE EXTINGUISHER

AutoCAD SHX Text

FIRE EXTINGUISHER

AutoCAD SHX Text

NEW ROOM

AutoCAD SHX Text

EXISTING ROOM

AutoCAD SHX Text

NEW GLAZING SYSTEM TO MATCH EXISTING

AutoCAD SHX Text

TLT

AutoCAD SHX Text

TLT

AutoCAD SHX Text

AutoCAD SHX Text 7'-7"

AutoCAD SHX Text 129A

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 6'-6"

AutoCAD SHX Text 8"

AutoCAD SHX Text 4'-0"

AutoCAD SHX Text

AutoCAD SHX Text A4.00

AutoCAD SHX Text

SIM

AutoCAD SHX Text

INFO.

AutoCAD SHX Text

FE-1

AutoCAD SHX Text

FE-1

AutoCAD SHX Text

FE-2

AutoCAD SHX Text

FE-1

AutoCAD SHX Text

FE-1

AutoCAD SHX Text

FE-2

AutoCAD SHX Text

FE-1

AutoCAD SHX Text

FE-1

AutoCAD SHX Text

FE-1

AutoCAD SHX Text

FE-1

AutoCAD SHX Text 12'-8 3/8"

AutoCAD SHX Text 5'-3"

AutoCAD SHX Text

AutoCAD SHX Text A3.03

AutoCAD SHX Text 6'-3"

AutoCAD SHX Text 9'-2"

AutoCAD SHX Text 6'-6"

AutoCAD SHX Text 7'-1"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 8'-11"

AutoCAD SHX Text

CRT. REPORTER

AutoCAD SHX Text

CLERK

AutoCAD SHX Text

STAFF ATTY.

AutoCAD SHX Text

FROST OR TINT GLASS

AutoCAD SHX Text

FINGERPRINT

AutoCAD SHX Text 159B

AutoCAD SHX Text R

AutoCAD SHX Text A5.00

AutoCAD SHX Text

AutoCAD SHX Text A4.00

AutoCAD SHX Text

TELE/

AutoCAD SHX Text 3'-8"

AutoCAD SHX Text 3'-4"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text S

AutoCAD SHX Text A5.00

AutoCAD SHX Text

RELOCATE & RECONFIGURE EXISTING FILING& RAISED FLOOR SYSTEM.

AutoCAD SHX Text

1'-6" MIN.

AutoCAD SHX Text

RAISE REMAINING FLOOR TO MATCH ELEVATION OF EXIST FILING SYSTEM

AutoCAD SHX Text

NO WORK THIS SHEET

AutoCAD SHX Text

ADD 1 6/12/25

AutoCAD SHX Text

BID DOCUMENTS

architects & planners IPG, Incorporated

807 Northwood Park Drive Valdosta, Georgia 31602

T: 229.242.3557 F: 229.242.4339

E: mail@ipgarchitects.com www.ipgarchitects.com

R D

, F

E, G

FAYETTE COUNTY

RENOVATION

JUSTICE CENTER

Fayetteville, GA

A4.12

DOOR

SCHEDULE

DOOR SCHEDULE - FIRST FLOOR DOOR SCHEDULE - THIRD FLOOR

DOOR SCHEDULE - SECOND FLOOR

DOOR SCHEDULE - THIRD FLOOR CONTINUED

AutoCAD SHX Text

RE/ZA/RC/JB

AutoCAD SHX Text

DRAWN

AutoCAD SHX Text

CHECKED

AutoCAD SHX Text

JOB #

AutoCAD SHX Text

DATE

AutoCAD SHX Text

REV.

AutoCAD SHX Text

REV.

AutoCAD SHX Text

REV.

AutoCAD SHX Text

REV.

AutoCAD SHX Text or reused without permission and credit.

AutoCAD SHX Text Architect and may not be reproduced

AutoCAD SHX Text IPG, Incorporated. 2025

AutoCAD SHX Text These drawings are the property of the

AutoCAD SHX Text c

AutoCAD SHX Text

14APRIL2025

AutoCAD SHX Text T

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text I

AutoCAD SHX Text H

AutoCAD SHX Text C

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text

ROBERT F. EVANS, JR.

AutoCAD SHX Text C

AutoCAD SHX Text R

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text G

AutoCAD SHX Text E

AutoCAD SHX Text O

AutoCAD SHX Text R

AutoCAD SHX Text G

AutoCAD SHX Text I

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text T

AutoCAD SHX Text I

AutoCAD SHX Text F

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text o.

AutoCAD SHX Text

AutoCAD SHX Text 1-3/4"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 185A

AutoCAD SHX Text

TOILET

AutoCAD SHX Text 1-3/4"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 159B

AutoCAD SHX Text

FINGERPRINT

AutoCAD SHX Text 1-3/4"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 160A

AutoCAD SHX Text

MAG./PROBATE/FLEX/HEARING

AutoCAD SHX Text 1-3/4"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 176A

AutoCAD SHX Text

INMATE MEETING

AutoCAD SHX Text 1-3/4"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 177A

AutoCAD SHX Text

ATTY. MEETING

AutoCAD SHX Text 1-3/4"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 178A

AutoCAD SHX Text

MAGISTRATE ADMIN

AutoCAD SHX Text 1-3/4"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 178B

AutoCAD SHX Text

MAGISTRATE ADMIN

AutoCAD SHX Text 1-3/4"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 179A

AutoCAD SHX Text

STORAGE

AutoCAD SHX Text 1-3/4"

AutoCAD SHX Text 7'-0"

AutoCAD SHX Text 3'-0"

AutoCAD SHX Text 183B

AutoCAD SHX Text

CLERK

AutoCAD SHX Text 1-3/4"

AutoCAD SHX…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Jun 30, 2025.