Roof Replacement Project for Florida Wildlife Conservation Commission

This is a construction permit set and design documentation for a roof replacement project at the South Region Headquarters of the Florida Wildlife Conservation Commission (FWC), located at 8535 Northlake Boulevard, West Palm Beach, Florida 33412. The project, identified as FWC-02425150 with WDA Project No. 2500-01, involves complete demolition of existing roof structures and installation of new roofing systems across multiple buildings (Buildings A, B, and C). The scope of work includes removal of approximately 14,000 square feet of existing roof area and installation of new roof systems with associated wind load plans, nailing pattern specifications, and comprehensive detail drawings for valleys, ridges, gutters, vents, and fascia elements. The project incorporates mechanical, plumbing, electrical, and fire protection systems designed by CMTA Engineering, with architectural services provided by Williamson Design Associates. The permit set was dated April 30, 2025, and includes complete construction documents with specifications, general notes, demolition roof plans for all buildings, new roof plans with wind load calculations, typical roof details, and electrical lightning protection specifications.

The project documentation includes comprehensive design drawings prepared in compliance with the 2023 Florida Building Code, 2023 Florida Plumbing Code, and 8th Edition Florida Fire Prevention Code. The plans specify materials, construction methodologies, and performance requirements for all roofing systems, including detailed wind load Ultimate Wind Pressure (UWP) calculations and roof nailing patterns. The electrical scope encompasses a lightning protection system with ridge air terminals, exposed downleads, cable splicing requirements, and ground connections. Construction details address standard roofing conditions including typical valley details, ridge details, roof cutter systems, lower and upper level fascia details, expansion joint details, slope transition cap details, splash block details, and two-ridge reglet system details. The project deliverables consist of 16 architectural sheets (T-1 through A15), 2 electrical sheets (E0.1 and E1.0), and associated technical specifications, providing complete contract documentation for bidding and construction purposes.