25-NORFP-E50-0002_SOW_12122024.pdf
PDF 119 KB Posted
- Attached to
- 25-SIMACQ-E50-0002: Data Logger Calibration Federal contract opportunity
- Solicitation number
- N6339425Q0012
About this file
This Statement of Work dated December 12, 2024 outlines calibration and repair services required by the Naval Surface Warfare Center, Port Hueneme Division (NSWC PHD) for data loggers that support Standard Missile All-Up-Rounds during transportation and storage. The services are required by Program Executive Office Missile Defense Agency to monitor environmental conditions and ensure mission safety and integrity.
The contractor, LANSMONT, will provide ISO/IEC 17025:2005 accredited calibration services including battery current checks, memory verification, input/trigger functionality testing, signal conditioner calibration, shock & vibration calibration, temperature response verification, sensor calibration, and installation of new batteries and calibration labels. Repair services will be performed as needed, with an initial evaluation fee that will be waived if no repairs are required. If repair costs exceed the standard evaluation fee, LANSMONT will provide an additional quote for approval. All work will be performed at the vendor's location, with NSWC PHD responsible for shipping the data loggers to LANSMONT.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 25-SIMACQ-E50-0002_COMBINED SOLICTATION _25Q0012_01152025.pdf | ||
| 25-NORFP-E50-0002_Redacted JA_01082025.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
December 12, 2024
1. BACKGROUND/INTRODUCTION
Naval Surface Warfare Center, Port Hueneme Division (NSWC PHD) is the designated In- Service Engineering Agent and the data loggers support the Standard Missile All-Up-Rounds during transportation and storage to monitor the environmental conditions. This is a requirement by Program Executive Office Missile Defense Agency to ensure the safety and integrity of the mission.
2. OBJECTIVE
The objective of this contract is to procure calibration services from the manufacturer, LANSMONT and procure repair of data logger’s as needed.
3. SCOPE OF WORK
Scope of work under this contract includes the following
Calibration:
Contractor will verify the proper function, quality and measurement accuracy. Calibration services will be accredited to ISO/IEC 17025:2005 standards. All calibration standards and test equipment will be traceable to the National Institute of Standards and Technology.
Below is a sample of the Calibration services that are to be completed, along with calibration documents from LANSMONT that will certify that our instruments meet the ISO/IEC 17025:2005 Standards
• Check battery current draw
• Check all on-board memory
• Check functionality of internal and external inputs
• Check functionality of external triggers
• Calibrate signal conditioners
• Back-to-back comparison calibration for shock & vibration input
• System temperature response verification
• Check system frequency response
• Calibrate temperature, humidity, and atmospheric pressure sensors
• Verify accurate and stable signal conditioner gains
• Install new main and backup batteries (if appropriate)
• Install tamper seals and Cal labels
Repair:
Contractor will evaluate our instruments to ensure that it is operating as designed. If the instrument is found to be functioning correctly and no repair is needed, the Evaluation & Repair fee will be waived. If repairs are required, LANSMONT CORP. will automatically proceed to complete the repair provided doing so will not exceed this Evaluation & Repair fee. If the cost of repairs will exceed this fee, then LANSMONT CORP. will issue an additional quotation for the repair and proceed upon approval from the customer.
Shipment:
NSWC PHD will ensure that all data loggers are shipped to Lansmont for calibration and repair services to be completed.
4. LANGUAGE OF WORK
Work will be performed and delivered in English.
5. LOCATION OF WORK
Work performed at vendor’s location
File details come from the government source that posted it. Updated .