25.256 WHA Ulbrich Heights Kitchen Renovations BID Dwgs.pdf

9 MB Posted

Attached to
Kitchen Renovations Ulbrich Heights Housing Complex
Solicitation number
37430
Issued by
New Haven County, Waterbury City, Connecticut

About this file

Written by GovTribe AI ·

This document is a set of electrical bid drawings for the Wallingford Housing Authority's Ulbrich Heights Complex Kitchen Renovations project located at Wharton Brook Drive, Louis Circle, and Tremper Drive in Wallingford, Connecticut. The project encompasses kitchen renovations across multiple building types (Types A through E and additional unit types 2-7) within the residential complex. The drawings were issued for bid as of March 6, 2026, and were prepared by Silver Petrucci + Associates, located in Hamden and New London, Connecticut. The scope includes electrical work across garden buildings with multiple apartment unit types and configurations, including standard and mobility-modified units.

The electrical work specifications detail comprehensive renovation requirements including replacement and installation of fixtures, receptacles, switches, and related electrical components across the various apartment types. Construction includes furnishing and installing GFCI tamper-resistant receptacles, 50-ampere 240-volt 4-wire range receptacles, recessed junction boxes for range hoods, and ceiling-mounted light fixtures with LED lamps (specified from HD Supply). Demolition notes indicate selective removal of existing electrical devices with reuse of back boxes and wiring where applicable. All work must comply with Connecticut State Building Code and Fire Safety Code, with materials conforming to UL and NEMA standards. The specifications mandate new combination arc-fault breakers compatible with existing GE Q-line series panels, and wiring devices from manufacturers including Leviton, Hubbell, or Bryant, with all work to remain in proper working order for one year following final acceptance.

View the file

Other files

File Type Posted
37430_Jun_16_26_solicitation_doc.pdf PDF
37430_Jul_20_26_solicitation_doc.pdf PDF
25.256 WHA Ulbrich Heights Kitchen Renovations BID.pdf PDF
37430_Jun_22_26_solicitation_doc.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

APARTMENT

TYPE 1

APARTMENT

TYPE 3

APARTMENT

TYPE 2

APARTMENT

TYPE 2 (M)

APARTMENT

TYPE 3 (M)

APARTMENT

TYPE 1 (M)

APARTMENT

TYPE 1

APARTMENT

TYPE 3

APARTMENT

TYPE 2

APARTMENT

TYPE 3-1

APARTMENT

TYPE 2-1

APARTMENT

TYPE 2 (M)

APARTMENT

TYPE 3 (M)

APARTMENT

TYPE 1 (M)

Drawing Title:Revised By:Date:Description:Revision:Project Title: Date:

Scale:

Drawn By:

Project Number:

Drawing Number:

03/06/2026

25-256

- -WALLINGFORD HOUSING AUTHORITY:

ULBRICH HEIGHTS COMPLEX KITCHEN RENOVATIONS

WHARTON BROOK DR., LOUIS CIRCLE, & TREMPER DR.

WALLINGFORD, CT 06492

AS INDICATED

SILVER

203 230 9007

3190 WHITNEY AVENUE HAMDEN

silverpetrucelli.com

CT 06320

ASSOCIATESPETRUCELLI +

CT 06518

311 STATE STREET NEW LONDON

Project Phase:

State Project Number:

ISSUED FOR BID

OVERALL GARDEN BUILDING

TYPES A & B

DJT

I. ELECTRICAL GENERAL REQUIREMENTS

A. ALL WORK SHALL COMPLY WITH CONNECTICUT STATE BUILDING CODE AND CONNECTICUT STATE FIRE

SAFETY CODE AND SHALL BE ACCOMPLISHED IN A NEAT AND WORKMAN LIKE MANNER.

B. MATERIAL & EQUIPMENT SHALL BE NEW UNLESS SPECIFICALLY NOTED OTHERWISE AND SHALL BE LISTED BY

UNDERWRITERS LABORATORIES.

C. SUBMITTALS:

1. SUBMIT PRODUCT DATA, SHOP DRAWINGS, RECORD DRAWINGS AND O&M MANUALS WHERE REQUIRED

BY INDIVIDUAL SPECIFICATION SECTIONS.

2. SUBMIT THREE COPIES TO OWNER.

D. ELECTRICAL INSTALLATION:

1. COORDINATE ELECTRICAL SYSTEMS, EQUIPMENT AND MATERIALS INSTALLATION WITH OTHER

BUILDING COMPONENTS. REFER ALL CONFLICTS TO ENGINEER BEFORE CONTINUING WITH WORK.

2. INSTALL SYSTEMS TO PROVIDE MAXIMUM HEADROOM POSSIBLE UNLESS INDICATED OTHERWISE.

3. INSTALL SYSTEMS LEVEL, PLUMB, PARALLEL AND PERPENDICULAR TO OTHER BUILDING SYSTEMS AND

COMPONENTS.

4. INSTALL EQUIPMENT TO FACILITATE REPAIR, MAINTENANCE OR REPLACEMENT.

5. PERFORM CUTTING AND PATCHING REQUIRED TO REMOVE AND REPLACE DEFECTIVE WORK OR WORK

NOT CONFORMING TO REQUIREMENTS OF CONTRACT DOCUMENTS.

6. CONTRACTOR SHALL LEAVE THE ENTIRE ELECTRICAL SYSTEM IN PROPER WORKING ORDER AND

SHALL, WITHOUT ADDITIONAL CHARGE, REPLACE ANY WORK, MATERIALS, OR EQUIPMENT FURNISHED & INSTALLED BY HIM UNDER THIS WHICH DEVELOP DEFECTS, EXCEPT FROM NORMAL WEAR & TEAR, WITHIN ONE YEAR FROM DATE OF FINAL ACCEPTANCE BY OWNER.

II. RACEWAYS, BOXES, AND FITTINGS

A. COMPONENTS AND INSTALLATION SHALL COMPLY WITH NFPA 70 & NEMA AND SHALL BE UL LISTED.

B. INTERIOR RACEWAYS SHALL BE ELECTRICAL METALLIC TUBING IN UNFINISHED SPACES AND SURFACE

RACEWAY (WIREMOLD OR EQUAL) IN FINISHED SPACES.

C. EXTERIOR RACEWAYS ABOVE GROUND SHALL BE RIGID METAL CONDUIT OR LIQUID-TIGHT FLEXIBLE METAL

CONDUIT (MAX. LENGTH 5').

D. EXTERIOR RACEWAYS BELOW GROUND SHALL BE RIGID METAL CONDUIT OR SCHEDULE 40 PVC.

E. USE RACEWAY FITTINGS COMPATIBLE WITH ASSOCIATED RACEWAY AND APPLICATION.

F. BOXES SHALL BE STEEL CONFORMING TO UL 514A AND NEMA OS1. FITTINGS SHALL CONFORM TO UL 514B.

III. BUILDING WIRE

A. WIRE SHALL COMPLY WITH UL 83 AND NEMA WC-5. CONNECTORS SHALL COMPLY WITH UL 486A.

B. CONDUCTORS SHALL BE COPPER AND INSULATION SHALL BE THHN/THWN.

C. INTERIOR WIRING SHALL BE BUILDING WIRE IN CONDUIT WHERE EXPOSED AND MC CABLE WHERE

CONCEALED.

IV. SUPPORTING DEVICES

A. SUPPORTS, HARDWARE AND FASTENERS SHALL BE PROTECTED WITH ZINC COATING.

B. SLEEVES SHALL BE SCHEDULE 40 GALVANIZED STEEL PIPE.

C. CONFORM TO MANUFACTURER'S RECOMMENDATIONS FOR SELECTION AND INSTALLATION OF SUPPORTS

AND CONFORM TO THE FOLLOWING:

1. SUPPORT INDIVIDUAL HORIZONTAL RACEWAYS BY SEPARATE PIPE HANGERS.

2. SUPPORT RACEWAY WITHIN ONE FOOT OF ANY UNSUPPORTED BOX.

D. INSTALL SLEEVES IN CONCRETE SLABS AND WALLS AND FIRE RATED WALLS AND FLOORS. APPLY UL LISTED

FIRE STOPPING MATERIAL WHERE REQUIRED.

V. ELECTRICAL IDENTIFICATION

A. PROVIDE EQUIPMENT IDENTIFICATION LABELS OF ENGRAVED PLASTIC LAMINATE FOR METER SOCKETS, PANELBOARDS & DISCONNECTS.

B. CONDUCTORS SHALL BE COLOR CODED IN ACCORDANCE WITH NFPA 70 AND ANSI A13.1.

C. PROVIDE TYPED PANELBOARD CIRCUIT DIRECTORY FOR EACH PANELBOARD.

D. PROVIDE UNDERGROUND WARNING TAPE FOR ALL BURIED ELECTRICAL SERVICES.

VI. PANELBOARDS

A. ALL LOAD CENTERS ARE EXISTING GE Q-LINE SERIES. PROVIDE NEW COMBINATION ARC-FAULT BREAKERS

THAT ARE LISTED FOR USE WITH THESE PANELS.

B. UPDATE PANEL DIRECTORIES.

VII.LIGHT FIXTURES

A. MANUFACTURERS:

A. LITHONIA

B. COOPER

C. COLUMBIA

D. OTHERS AS SPECIFIED OD ALLOWED BY EQUAL SUBSTITUTION.

B. PRODUCTS: REFER TO LIGHT FIXTURE SCHEDULE.

C. PROVIDE PRODUCT DATA SUBMITTALS.

VIII. WIRING DEVICES

A. MANUFACTURERS:

1. LIEVITON

2. HUBBELL

3. BRYANT

4. OTHERS AS SPECIFIED OD ALLOWED BY EQUAL SUBSTITUTION.

B. WIRING DEVICES SHALL CONFORM TO NEMA WD 1.

C. WALL SWITCHES SHALL BE NEMA WD 1 GENERAL DUTY, AC ONLY GENERAL USE SNAP SWITCH. RATED FOR

120/277 VOLTS/20 AMPS.

D. RECEPTACLES SHALL BE NEMA WD 6, TAMPER RESISTANT, PLASTIC BODY, 120 VOLTS, 20 AMPS, TYPE 5-20, UL 498 AND CSA C22.2, #42 LISTED.

E. GFCI RECEPTACLES SHALL BE EQUIPPED WITH INTEGRAL GROUND-FAULT-CIRCUIT INTERRUPTER.

F. COVER PLATES SHALL BE NYLON UNLESS OTHERWISE DIRECTED BY OWNER. COLOR SHALL MATCH

DEVICES.

G. COORDINATE DEVICE COLORS WITH OWNER PRIOR TO ORDERING MATERIALS.

H. PROVIDE PRODUCT DATA SUBMITTALS.

ELECTRICAL SPECIFICATIONS

E100

ELECTRICAL LEGEND

LIGHT FIXTURE SCHEDULE

AutoCAD SHX Text

AutoCAD SHX Text

GARDEN BUILDING TYPE "B" FIRST FLOOR PLAN

AutoCAD SHX Text 1/8"=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

GARDEN BUILDING TYPE "A" FIRST FLOOR PLAN

AutoCAD SHX Text 1/8"=1'-0"

AutoCAD SHX Text CONFLICTS TO ENGINEER BEFORE CONTINUING WITH WORK. UNLESS INDICATED OTHERWISE. & NEMA AND SHALL BE UL LISTED. SPACES AND SURFACE LIQUID-TIGHT FLEXIBLE METAL SCHEDULE 40 PVC. AND APPLICATION. FITTINGS SHALL CONFORM TO UL 514B. COMPLY WITH UL 486A. AND MC CABLE WHERE AND INSTALLATION OF SUPPORTS WALLS AND FLOORS. APPLY UL LISTED LAMINATE FOR METER SOCKETS, ARC-FAULT BREAKERS USE SNAP SWITCH. RATED FOR VOLTS, 20 AMPS, TYPE 5-20, COLOR SHALL MATCH

AutoCAD SHX Text

EXISTING ELECTRICAL PANEL, 120/240 VOLT, 1-PHASE

AutoCAD SHX Text

NON-FUSED DISCONNECT SWITCH

AutoCAD SHX Text

SINGLE-POLE SWITCH; MOUNT AT 48" AFF

AutoCAD SHX Text

3-WAY SWITCH; MOUNT AT 48" AFF

AutoCAD SHX Text

TAMPER RESISTANT DUPLEX RECEPTACLE; MOUNT AT 48" AFF UNLESS OTHERWISE SPECIFIED.

AutoCAD SHX Text

FUSED DISCONNECT SWITCH

AutoCAD SHX Text

JUNCTION BOX, ACCORDING TO NEC REQUIREMENTS

AutoCAD SHX Text J

AutoCAD SHX Text

SURFACE MOUNTED CEILING; SUBLETTER INDICATES FIXTURE TYPE

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

PROVIDE GFCI PROTECTION WHERE NOTED.

AutoCAD SHX Text 8" ROUND CEILING MOUNT GLOBE, FURNISH WITH (2) A19 LED LAMPS, 850 LUMEN MINIMUM, 3500K: HD SUPPLY #322214

AutoCAD SHX Text C1

AutoCAD SHX Text 6" ROUND CEILING MOUNT GLOBE, FURNISH WITH (1) A19 LED LAMP, 850 LUMEN MINIMUM, 3500K: HD SUPPLY #322212

AutoCAD SHX Text C2

AutoCAD SHX Text

240V, 50A, 2-POLE RANGE RECEPTACLE;

APARTMENT

TYPE 4 APARTMENT

TYPE 3 APARTMENT

TYPE 2

APARTMENT

TYPE 4 (M)

APARTMENT

TYPE 3 (M)

APARTMENT

TYPE 2 (M)

APARTMENT

TYPE 7

APARTMENT

TYPE 6

APARTMENT

TYPE 7 (M)

APARTMENT

TYPE 6 (M)

APARTMENT

TYPE 5

APARTMENT

TYPE 2

APARTMENT

TYPE 5 (M)

APARTMENT

TYPE 2 (M)

Drawing Title:Revised By:Date:Description:Revision:Project Title: Date:

Scale:

Drawn By:

Project Number:

Drawing Number:

03/06/2026

25-256

- -WALLINGFORD HOUSING AUTHORITY:

ULBRICH HEIGHTS COMPLEX KITCHEN RENOVATIONS

WHARTON BROOK DR., LOUIS CIRCLE, & TREMPER DR.

WALLINGFORD, CT 06492

AS INDICATED

SILVER

203 230 9007

3190 WHITNEY AVENUE HAMDEN

silverpetrucelli.com

CT 06320

ASSOCIATESPETRUCELLI +

CT 06518

311 STATE STREET NEW LONDON

Project Phase:

State Project Number:

ISSUED FOR BID

OVERALL GARDEN BUILDING

TYPES C, D, & E

DJT

E101

AutoCAD SHX Text

AutoCAD SHX Text

GARDEN BUILDING TYPE "C" FIRST FLOOR PLAN

AutoCAD SHX Text 1/8"=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

GARDEN BUILDING TYPE "D" FIRST FLOOR PLAN

AutoCAD SHX Text 1/8"=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

GARDEN BUILDING TYPE "E" FIRST FLOOR PLAN

1/8"=1'-0"

7 25

A

C

GFA

D

H

G

E G

B

C

A

C

B

C

B

G

AG

G

E

D

H

(NOT ALL NOTE APPLY TO THIS SHEET)

REMOVE RECEPTACLE AND COVER PLATE. REPLACE WITH NEW TYPE AS

INDICATED ON NEW WORK PLAN. REUSE BACK BOX AND WIRING SHALL

BE MADE SAFE UNTIL NEW WORK RECEPTACLE INSTALLATION IS

COMPLETE.

REMOVE RECEPTACLE, BACK BOX, AND ALL ASSOCIATED WIRING.

REWORK WIRING AS REQUIRED TO KEEP CONTINUITY WITH ANY ACTIVE

DOWNSTREAM DEVICES.

REMOVE RANGE RECEPTACLE AND COVER PLATE. MAKE SAFE AND

REUSE BRANCH CIRCUIT WIRING AND 50A, 2-POLE CIRCUIT BREAKER.

REMOVE RANGE RECEPTACLE, BACK BOX, AND ASSOCIATED WIRING IN

ITS ENTIRETY BACK TO 50A, 2-POLE CIRCUIT BREAKER IN BASEMENT

PANEL. REFER TO ELEC NEW WORK PLAN FOR NEW RANGE RECEPTACLE

LOCATION AND REQUIREMENTS.

REMOVE REFRIGERATOR RECEPTACLE, COVER PLATE AND BACK BOX.

REPLACE WITH NEW TYPE IN LOCATION AS INDICATED ON NEW WORK

PLAN. WIRING SHALL BE MADE SAFE AND REUSED. EXTENDED/ALTER

WIRING TO NEW LOCATION AS REQUIRED.

REMOVE CEILING MOUNTED LIGHT FIXTURE. REPLACE WITH NEW TYPE

AS INDICATED ON NEW WORK PLAN. REUSE BACK BOX AND WIRING

SHALL BE MADE SAFE UNTIL NEW WORK LIGHT FIXTURE INSTALLATION IS

COMPLETE.

REMOVE 3-WAY TOGGLE SWITCH AND COVER PLATE. REPLACE WITH

NEW TYPE AS INDICATED ON NEW WORK PLAN. REUSE BACK BOX AND

WIRING SHALL BE MADE SAFE UNTIL NEW WORK SWITCH INSTALLATION IS

COMPLETE.

REMOVE SINGLE POLE TOGGLE SWITCH AND COVER PLATE. REPLACE

WITH NEW TYPE AS INDICATED ON NEW WORK PLAN. REUSE BACK BOX

AND WIRING SHALL BE MADE SAFE UNTIL NEW WORK SWITCH

INSTALLATION IS COMPLETE.

(NOT ALL NOTE APPLY TO THIS SHEET)

FURNISH AND INSTALL GFCI, TAMPER-RESISTANT RECEPTACLE AND

COVER PLATE IN EXISTING BACK BOX AND TERMINATE TO EXISTING

WIRING.

FURNISH AND INSTALL CEILING MOUNTED LIGHT FIXTURE, OF TYPE AS

INDICATED, AND TERMINATE TO EXISTING WIRING. REFER TO LIGHT

FIXTURE SCHEDULE ON SHEET E001 FOR ADDITIONAL INFORMATION AND

REQUIREMENTS.

FURNISH AND INSTALL 3-WAY TOGGLE SWITCH AND COVER PLATE IN

EXISTING BACK BOX AND TERMINATE TO EXISTING WIRING. TEST

SWITCHES TO ENSURE THAT 3-WAY CONTROLS ARE WORKING PROPERLY

WITH LIGHT FIXTURE.

FURNISH AND INSTALL 50A, 240V, 4-WIRE RANGE RECEPTACLE IN

LOCATION PER APPROVED RANGE MANUFACTURER'S REQUIREMENTS.

EXTENDED/ALTER EXISTING WIRING AND TERMINATE TO RECEPTACLE.

FURNISH AND INSTALL GFCI, TAMPER-PROOF REFRIGERATOR

RECEPTACLE IN LOCATION PER APPROVED REFRIGERATOR

MANUFACTURER'S REQUIREMENTS. EXTENDED/ALTER EXISTING WIRING

AND TERMINATE TO RECEPTACLE.

FURNISH AND INSTALL SINGLE POLE TOGGLE SWITCH AND COVER PLATE

IN EXISTING BACK BOX AND TERMINATE TO EXISTING WIRING.

FURNISH AND INSTALL GFCI, TAMPER-PROOF RECEPTACLE, OF TYPE AS

INDICATED, IN THIS LOCATION. EXTEND/ALTER EXISTING KITCHEN

RECEPTACLE BRANCH CIRCUIT WRING AND TERMINATE TO RECEPTACLE.

FURNISH AND INSTALL RECESSED J-BOX IN WALL IN LOCATION AS

REQUIRED PER APPROVED RANGE HOOD MANUFACTURER'S

REQUIREMENTS. WIRE RANGE HOOD FROM LOAD SIDE OF EXISTING

KITCHEN GFI RECEPTACLE CIRCUIT.

A

B

C

D

E

F

G

H

F B

DEMOLITION NOTES

CONSTRUCTION NOTES

ONLY THE FOLLOWING UNITS:

TYPE 3 = 324B, 27B, 37B, 38B, 21, & 33

TYPE 3 (M) = 324E, 32E, 15, 27, & 32

TYPE 3-1 = 27D & 26

ONLY THE FOLLOWING UNITS:

TYPE 2 = 324C, 25B, 27C, 29B, 31C, 32C, 37C, 39B, 31 & 42

TYPE 2 (M) = 25C, 29C, 31D, 32D, 35C, 37D, 38D, 39C, & 29

TYPE 2-1 = 28

ONLY THE FOLLOWING UNITS:

TYPE 3 = 324B, 27B, 37B, 38B, 21, & 33

TYPE 3 (M) = 324E, 32E, 15, 27, & 32

TYPE 3-1 = 27D & 26

ONLY THE FOLLOWING UNITS:

TYPE 2 = 324C, 25B, 27C, 29B, 31C, 32C, 37C, 39B, 31 & 42

TYPE 2 (M) = 25C, 29C, 31D, 32D, 35C, 37D, 38D, 39C, & 29

TYPE 2-1 = 28

Drawing Title:Revised By:Date:Description:Revision:Project Title: Date:

Scale:

Drawn By:

Project Number:

Drawing Number:

03/06/2026

25-256

- -WALLINGFORD HOUSING AUTHORITY:

ULBRICH HEIGHTS COMPLEX KITCHEN RENOVATIONS

WHARTON BROOK DR., LOUIS CIRCLE, & TREMPER DR.

WALLINGFORD, CT 06492

AS INDICATED

SILVER

203 230 9007

3190 WHITNEY AVENUE HAMDEN

silverpetrucelli.com

CT 06320

ASSOCIATESPETRUCELLI +

CT 06518

311 STATE STREET NEW LONDON

Project Phase:

State Project Number:

ISSUED FOR BID

TYPICAL UNIT LAYOUT

TYPES 2, 2-1, 3, & 3-1

ELECTRICAL

DJT

E102

AutoCAD SHX Text

AutoCAD SHX Text

UNIT TYPES 2 & 2-1 - FIRST FLOOR

AutoCAD SHX Text 1/4"=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

UNIT TYPES 3 & 3-1 - FIRST FLOOR

AutoCAD SHX Text 1/4"=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

UNIT TYPE 2 & 2-1 - DEMOLITION PLAN

AutoCAD SHX Text 1/4"=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

UNIT TYPE 3 & 3-1 - DEMOLITION PLAN

AutoCAD SHX Text 1/4"=1'-0"

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text C1

AutoCAD SHX Text C2

AutoCAD SHX Text J

AutoCAD SHX Text C1

AutoCAD SHX Text C2

AutoCAD SHX Text J

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

S

(NOT ALL NOTE APPLY TO THIS SHEET)

REMOVE RECEPTACLE AND COVER PLATE. REPLACE WITH NEW TYPE AS

INDICATED ON NEW WORK PLAN. REUSE BACK BOX AND WIRING SHALL

BE MADE SAFE UNTIL NEW WORK RECEPTACLE INSTALLATION IS

COMPLETE.

REMOVE RECEPTACLE, BACK BOX, AND ALL ASSOCIATED WIRING.

REWORK WIRING AS REQUIRED TO KEEP CONTINUITY WITH ANY ACTIVE

DOWNSTREAM DEVICES.

REMOVE RANGE RECEPTACLE AND COVER PLATE. MAKE SAFE AND

REUSE BRANCH CIRCUIT WIRING AND 50A, 2-POLE CIRCUIT BREAKER.

REMOVE RANGE RECEPTACLE, BACK BOX, AND ASSOCIATED WIRING IN

ITS ENTIRETY BACK TO 50A, 2-POLE CIRCUIT BREAKER IN BASEMENT

PANEL. REFER TO ELEC NEW WORK PLAN FOR NEW RANGE RECEPTACLE

LOCATION AND REQUIREMENTS.

REMOVE REFRIGERATOR RECEPTACLE, COVER PLATE AND BACK BOX.

REPLACE WITH NEW TYPE IN LOCATION AS INDICATED ON NEW WORK

PLAN. WIRING SHALL BE MADE SAFE AND REUSED. EXTENDED/ALTER

WIRING TO NEW LOCATION AS REQUIRED.

REMOVE CEILING MOUNTED LIGHT FIXTURE. REPLACE WITH NEW TYPE

AS INDICATED ON NEW WORK PLAN. REUSE BACK BOX AND WIRING

SHALL BE MADE SAFE UNTIL NEW WORK LIGHT FIXTURE INSTALLATION IS

COMPLETE.

REMOVE 3-WAY TOGGLE SWITCH AND COVER PLATE. REPLACE WITH

NEW TYPE AS INDICATED ON NEW WORK PLAN. REUSE BACK BOX AND

WIRING SHALL BE MADE SAFE UNTIL NEW WORK SWITCH INSTALLATION IS

COMPLETE.

REMOVE SINGLE POLE TOGGLE SWITCH AND COVER PLATE. REPLACE

WITH NEW TYPE AS INDICATED ON NEW WORK PLAN. REUSE BACK BOX

AND WIRING SHALL BE MADE SAFE UNTIL NEW WORK SWITCH

INSTALLATION IS COMPLETE.

DEMOLITION NOTES

CONSTRUCTION NOTES

(NOT ALL NOTE APPLY TO THIS SHEET)

FURNISH AND INSTALL GFCI, TAMPER-RESISTANT RECEPTACLE AND

COVER PLATE IN EXISTING BACK BOX AND TERMINATE TO EXISTING

WIRING.

FURNISH AND INSTALL CEILING MOUNTED LIGHT FIXTURE, OF TYPE AS

INDICATED, AND TERMINATE TO EXISTING WIRING. REFER TO LIGHT

FIXTURE SCHEDULE ON SHEET E001 FOR ADDITIONAL INFORMATION AND

REQUIREMENTS.

FURNISH AND INSTALL 3-WAY TOGGLE SWITCH AND COVER PLATE IN

EXISTING BACK BOX AND TERMINATE TO EXISTING WIRING. TEST

SWITCHES TO ENSURE THAT 3-WAY CONTROLS ARE WORKING PROPERLY

WITH LIGHT FIXTURE.

FURNISH AND INSTALL 50A, 240V, 4-WIRE RANGE RECEPTACLE IN

LOCATION PER APPROVED RANGE MANUFACTURER'S REQUIREMENTS.

EXTENDED/ALTER EXISTING WIRING AND TERMINATE TO RECEPTACLE.

FURNISH AND INSTALL GFCI, TAMPER-PROOF REFRIGERATOR

RECEPTACLE IN LOCATION PER APPROVED REFRIGERATOR

MANUFACTURER'S REQUIREMENTS. EXTENDED/ALTER EXISTING WIRING

AND TERMINATE TO RECEPTACLE.

FURNISH AND INSTALL SINGLE POLE TOGGLE SWITCH AND COVER PLATE

IN EXISTING BACK BOX AND TERMINATE TO EXISTING WIRING.

FURNISH AND INSTALL GFCI, TAMPER-PROOF RECEPTACLE, OF TYPE AS

INDICATED, IN THIS LOCATION. EXTEND/ALTER EXISTING KITCHEN

RECEPTACLE BRANCH CIRCUIT WIRING AND TERMINATE TO RECEPTACLE.

FURNISH AND INSTALL RECESSED J-BOX IN WALL IN LOCATION AS

REQUIRED PER APPROVED RANGE HOOD MANUFACTURER'S

REQUIREMENTS. WIRE RANGE HOOD FROM LOAD SIDE OF EXISTING

KITCHEN GFI RECEPTACLE CIRCUIT.

A

B

C

D

E

F

G

H

A

A

A

D

HB

C

C

F

B

G

G E

6 6

E G

G

G

C

B

C

B

F

D HA

A

ONLY THE FOLLOWING UNITS:

TYPE 5 = 25A, 29A, 35A, & 39A

TYPE 5 (M) = 25D & 29D

ONLY THE FOLLOWING UNITS:

TYPE 5 = 25A, 29A, 35A, & 39A

TYPE 5 (M) = 25D & 29D

ONLY THE FOLLOWING UNITS:

TYPE 4 (M) = 48

ONLY THE FOLLOWING UNITS:

TYPE 4 (M) = 48

Drawing Title:Revised By:Date:Description:Revision:Project Title: Date:

Scale:

Drawn By:

Project Number:

Drawing Number:

03/06/2026

25-256

- -WALLINGFORD HOUSING AUTHORITY:

ULBRICH HEIGHTS COMPLEX KITCHEN RENOVATIONS

WHARTON BROOK DR., LOUIS CIRCLE, & TREMPER DR.

WALLINGFORD, CT 06492

AS INDICATED

SILVER

203 230 9007

3190 WHITNEY AVENUE HAMDEN

silverpetrucelli.com

CT 06320

ASSOCIATESPETRUCELLI +

CT 06518

311 STATE STREET NEW LONDON

Project Phase:

State Project Number:

ISSUED FOR BID DJT

TYPICAL UNIT LAYOUT

TYPES 4 & 5

ELECTRICAL E103

AutoCAD SHX Text

AutoCAD SHX Text

UNIT TYPE 4 - FIRST FLOOR

AutoCAD SHX Text 1/4"=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

UNIT TYPE 5 - FIRST FLOOR

AutoCAD SHX Text 1/4"=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

UNIT TYPE 4 - DEMOLITION PLAN

AutoCAD SHX Text 1/4"=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

UNIT TYPE 5 - DEMOLITION PLAN

AutoCAD SHX Text 1/4"=1'-0"

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text C1

AutoCAD SHX Text C2

AutoCAD SHX Text J

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text C1

AutoCAD SHX Text C2

AutoCAD SHX Text J

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

(NOT ALL NOTE APPLY TO THIS SHEET)

REMOVE RECEPTACLE AND COVER PLATE. REPLACE WITH NEW TYPE AS

INDICATED ON NEW WORK PLAN. REUSE BACK BOX AND WIRING SHALL

BE MADE SAFE UNTIL NEW WORK RECEPTACLE INSTALLATION IS

COMPLETE.

REMOVE RECEPTACLE, BACK BOX, AND ALL ASSOCIATED WIRING.

REWORK WIRING AS REQUIRED TO KEEP CONTINUITY WITH ANY ACTIVE

DOWNSTREAM DEVICES.

REMOVE RANGE RECEPTACLE AND COVER PLATE. MAKE SAFE AND

REUSE BRANCH CIRCUIT WIRING AND 50A, 2-POLE CIRCUIT BREAKER.

REMOVE RANGE RECEPTACLE, BACK BOX, AND ASSOCIATED WIRING IN

ITS ENTIRETY BACK TO 50A, 2-POLE CIRCUIT BREAKER IN BASEMENT

PANEL. REFER TO ELEC NEW WORK PLAN FOR NEW RANGE RECEPTACLE

LOCATION AND REQUIREMENTS.

REMOVE REFRIGERATOR RECEPTACLE, COVER PLATE AND BACK BOX.

REPLACE WITH NEW TYPE IN LOCATION AS INDICATED ON NEW WORK

PLAN. WIRING SHALL BE MADE SAFE AND REUSED. EXTENDED/ALTER

WIRING TO NEW LOCATION AS REQUIRED.

REMOVE CEILING MOUNTED LIGHT FIXTURE. REPLACE WITH NEW TYPE

AS INDICATED ON NEW WORK PLAN. REUSE BACK BOX AND WIRING

SHALL BE MADE SAFE UNTIL NEW WORK LIGHT FIXTURE INSTALLATION IS

COMPLETE.

REMOVE 3-WAY TOGGLE SWITCH AND COVER PLATE. REPLACE WITH

NEW TYPE AS INDICATED ON NEW WORK PLAN. REUSE BACK BOX AND

WIRING SHALL BE MADE SAFE UNTIL NEW WORK SWITCH INSTALLATION IS

COMPLETE.

REMOVE SINGLE POLE TOGGLE SWITCH AND COVER PLATE. REPLACE

WITH NEW TYPE AS INDICATED ON NEW WORK PLAN. REUSE BACK BOX

AND WIRING SHALL BE MADE SAFE UNTIL NEW WORK SWITCH

INSTALLATION IS COMPLETE.

DEMOLITION NOTES

CONSTRUCTION NOTES

(NOT ALL NOTE APPLY TO THIS SHEET)

FURNISH AND INSTALL GFCI, TAMPER-RESISTANT RECEPTACLE AND

COVER PLATE IN EXISTING BACK BOX AND TERMINATE TO EXISTING

WIRING.

FURNISH AND INSTALL CEILING MOUNTED LIGHT FIXTURE, OF TYPE AS

INDICATED, AND TERMINATE TO EXISTING WIRING. REFER TO LIGHT

FIXTURE SCHEDULE ON SHEET E001 FOR ADDITIONAL INFORMATION AND

REQUIREMENTS.

FURNISH AND INSTALL 3-WAY TOGGLE SWITCH AND COVER PLATE IN

EXISTING BACK BOX AND TERMINATE TO EXISTING WIRING. TEST

SWITCHES TO ENSURE THAT 3-WAY CONTROLS ARE WORKING PROPERLY

WITH LIGHT FIXTURE.

FURNISH AND INSTALL 50A, 240V, 4-WIRE RANGE RECEPTACLE IN

LOCATION PER APPROVED RANGE MANUFACTURER'S REQUIREMENTS.

EXTENDED/ALTER EXISTING WIRING AND TERMINATE TO RECEPTACLE.

FURNISH AND INSTALL GFCI, TAMPER-PROOF REFRIGERATOR

RECEPTACLE IN LOCATION PER APPROVED REFRIGERATOR

MANUFACTURER'S REQUIREMENTS. EXTENDED/ALTER EXISTING WIRING

AND TERMINATE TO RECEPTACLE.

FURNISH AND INSTALL SINGLE POLE TOGGLE SWITCH AND COVER PLATE

IN EXISTING BACK BOX AND TERMINATE TO EXISTING WIRING.

FURNISH AND INSTALL GFCI, TAMPER-PROOF RECEPTACLE, OF TYPE AS

INDICATED, IN THIS LOCATION. EXTEND/ALTER EXISTING KITCHEN

RECEPTACLE BRANCH CIRCUIT WRING AND TERMINATE TO RECEPTACLE.

FURNISH AND INSTALL RECESSED J-BOX IN WALL IN LOCATION AS

REQUIRED PER APPROVED RANGE HOOD MANUFACTURER'S

REQUIREMENTS. WIRE RANGE HOOD FROM LOAD SIDE OF EXISTING

KITCHEN GFI RECEPTACLE CIRCUIT.

A

B

C

D

E

F

G

H

6 6

E G

G

G

C

B

C

B

F

D HA

A

A

C

B

C

B

G

AG

G

E

D

H

F

ONLY THE FOLLOWING UNITS:

TYPE 7 = 49

TYPE 7 (M) = 43

ONLY THE FOLLOWING UNITS:

TYPE 7 = 49

TYPE 7 (M) = 43

ONLY THE FOLLOWING UNITS:

TYPE 6 = 7

TYPE 6 (M) = 5 & 45

ONLY THE FOLLOWING UNITS:

TYPE 6 = 7

TYPE 6 (M) = 5 & 45

Drawing Title:Revised By:Date:Description:Revision:Project Title: Date:

Scale:

Drawn By:

Project Number:

Drawing Number:

03/06/2026

25-256

- -WALLINGFORD HOUSING AUTHORITY:

ULBRICH HEIGHTS COMPLEX KITCHEN RENOVATIONS

WHARTON BROOK DR., LOUIS CIRCLE, & TREMPER DR.

WALLINGFORD, CT 06492

AS INDICATED

SILVER

203 230 9007

3190 WHITNEY AVENUE HAMDEN

silverpetrucelli.com

CT 06320

ASSOCIATESPETRUCELLI +

CT 06518

311 STATE STREET NEW LONDON

Project Phase:

State Project Number:

ISSUED FOR BID DJT

TYPICAL UNIT LAYOUT

TYPES 6 & 7

ELECTRICAL E104

AutoCAD SHX Text

AutoCAD SHX Text

UNIT TYPE 6 - FIRST FLOOR

AutoCAD SHX Text 1/4"=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

UNIT TYPE 7 - FIRST FLOOR

AutoCAD SHX Text 1/4"=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

UNIT TYPE 6 - DEMOLITION PLAN

AutoCAD SHX Text 1/4"=1'-0"

AutoCAD SHX Text

AutoCAD SHX Text

UNIT TYPE 7 - DEMOLITION PLAN

AutoCAD SHX Text 1/4"=1'-0"

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text C1

AutoCAD SHX Text C2

AutoCAD SHX Text J

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text C1

AutoCAD SHX Text C2

AutoCAD SHX Text J

AutoCAD SHX Text S

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text

File details come from the government source that posted it. Updated .