23RM147 SWICC Kettle Specs~2.pdf

Project

Item

Quantity

FCSI Section 11400

Approved

Date

760 Beta Drive, Unit D May1eld Village, Ohio 44143

Tel 1.216.481.4900 Fax 1.216.481.3782 Email steam@clevelandrange.com www.clevelandrange.com

G as K e ttle s

LEG TYPE, GAS-FIRED KETTLES

STATIONARY, 2⁄3 STEAM JACKETED “SPLASH PROOF SERIES”

40, 60, 80 or 100 GALLONS (150, 225, 300 or 337 LITERS)

Section 6, Page 11

5640A 02 / 2021

Standard Features

• High efficiency Power Burner Heating System (62% to 65% efficiency)

• Fast Heat-up and Recovery Time, 140M BTU’s on 40 gallon models, 190M BTU’s on 60 gallon and larger

• Insulated Heat Exchanger

• Automatic Ignition System

• Steam jacket permanently filled with treated, distilled water.

Venting and/or refilling not required

• Solid State Controls, for Temperature and Low Water Safety, in a plug-in Control Module

• Control Panel includes:

• Precise, consistent temperature control: less than ± 1°C variance (ideal for simmering).

• L.E.D. Indicators for Heat Cycle and Low Water

• Warning.

• Power “on/off” Switch

• Front mounted combination Pressure/Vacuum Gauge

• Type 316 Stainless Steel with #4 finish on kettle

• 2˝ diameter Tangent Draw-Off Valve with Drain Strainer

• Support Legs with level adjustable feet, flanged for floor bolting

• Spring-assisted, hinged, rotatable, domed Stainless Steel Cover

• 50 PSI Steam Jacket Rating and Safety valve

• Standard voltage is 115 volts, 60 Hz, single-phase, supplied with cord and plug

• Standard for natural gas operation

• Faucet Mounting Bracket (FBK)

• Typical approvals include AGA, CSA, CE, NSF and ASME

Options & Accessories

• Hot and Cold Water Faucet with Swing Spout (DPK)

• Cooking Baskets and Tri-Basket Supports (BS and TBS)

• Drain Strainers (DS-)

• 3" diameter Tangent Draw-off Valve with Drain Strainer (TD3)

• Kettle Accessory Kit (KAK) includes:

• Clean-up Brush (CB) • 36˝ Kettle Paddle (KP)

• 36˝ Kettle Whip (KW) • 36˝ Kettle Brush

• Draw-Off Brush (DB) • 24 oz. Ladle (KL)

• Automatic Water Meter (GMF or LMF)

• Measuring Strip (MS)

• Option for Propane Gas operation

• Correctional Package

• Heat Deflector Shield (HS001)

Models

• KGL-40 • KGL-80

• KGL-60 • KGL-100

Short Form Specifications Shall be CLEVELAND, Gas-fired Stationary Kettle, Model KGL-_____ ; _____ gallons. 2⁄3 Steam

Jacketed, Power Burner Heating System, Insulated

Heat Exchanger, 50 psi Steam Jacket Rating. Infinite

Variable Temperature Control, L.E.D. indicators for

Heat Cycle and Low Water Warning, spring-assisted

Cover, 2˝ Tangent Draw-off Valve with Drain

Strainer, Automatic Ignition System. 316 Stainless

Steel Interior.

KE004046-71

80 80

Christopher.J.Smith Highlight

Christopher.J.Smith Highlight

Christopher.J.Smith Highlight

760 Beta Drive, Unit D May1eld Village, Ohio 44143

Tel 1.216.481.4900 Fax 1.216.481.3782 Email steam@clevelandrange.com www.clevelandrange.com

G as

K e tt le s

Section 6, Page 12 02 / 2021

(NOT TO SCALE)

CAPACITIES: (in 8 oz. servings, other sizes may be calculated)

40 Gallon / 150 liters . . . 640 servings 60 Gallon / 225 liters . . . 960 servings 80 Gallon / 300 liters . . . 1280 servings 100 Gallon / 375 liters . . . 1600 servings

1Ú2ý dia. Soft Copper Tubing (each)

When ordered with optional faucet.

WATERELECTRIC

120V-1 Phase, 60 Hz, 10 amps

GAS CLEARANCEH

RIGHT = 3ý LEFT = 3ý REAR = 3ý

Allow 6ý space minimum from rear and sides when located near combustible walls. 12" recommended on right side for service

NATURAL PROPANE

Piping: 3Ú4ý N.P.T. Piping: 3Ú4ý N.P.T.

Supply pressure: Supply pressure:

4.00ý W.C. minimum 4.00ý W.C. minimum 14.00ý W.C. maximum 14.00ý W.C. maximum

Manufacturer must be notified if unit will be operated above 2,000 ft. altitude.

C

H CB.T.U. RATING

40 gal. 140,000

60 gal.

80 gal. 190,000

100 gal.

G

(COVER

OPEN)

3" (77 mm)

MINIMUM

CLEARANCE

F

3 (77 mm)

L

M

N O

P

H

J

K

FLOOR DRAIN

12" (305 mm) WIDE x 12" (305 mm) LONG

UNIT SHOWN WITH OPTIONAL 2" TANGENT DRAW-OFF VALVE,

SPRING ASSIST COVER AND HOT & COLD WATER FAUCET.

75º

H C

E

D

A

S

C

4" (102 mm)

B

T (I.D.)

RECOMMENDED

FLOOR SLOPE

1" (26 mm) per 4' (1220 mm)

PIPE DRAIN RECOMMENDED

min. valve size plus 1" (26 mm)

4" (102 mm)

RECOMMENDED

9/16" 14 mm

120º

TYP

1" (25 mm)

MAX. ADJUSTMENT

1 5/8" (42 mm) Ø

FLANGED FOOT DETAIL

7/16" (11 mm) Ø

3 HOLES ON

3 1/8" (80 mm) Ø B.C.D.

4 7/8" 124 Ø mm

VALVE

OPENING

DIMENSIONS

GALS./

LITERS A B C D E F G H J K L M N O P S T I.D.

40 IN 35 1/8 37 32 1/4 40 1/2 9 1/4 16 71 1/2 9 9/16 17 3/4 25 15/16 10 3/8 18 5/8 26 7/8 28 1/2 4 5/8 24 1/2 26 150 mm 893 940 820 1029 235 407 1817 243 451 659 264 474 683 724 118 648 661

60 IN 38 1/4 39 34 1/4 43 1/2 8 3/4 14 1/4 75 8 15/16 19 1/8 29 5/16 10 3/8 18 5/8 27 7/8 30 1/4 5 1/4 27 29 1/2 225 mm 972 991 870 1105 223 362 1905 228 486 745 264 474 709 769 134 686 750

80 IN 41 5/8 42 3/8 35 1/2 45 1/2 8 3/4 15 1/2 79 9 1/4 20 3/4 32 1/4 10 3/8 18 5/8 29 5/8 31 1/2 6 5/8 29 33 300 mm 1058 1077 902 1156 223 394 2007 235 528 820 264 474 753 801 169 737 839

100 IN 44 43 1/2 36 1/2 47 1/2 8 3/4 15 1/2 83 1/2 9 1/8 21 7/8 34 5/8 10 3/8 18 5/8 31 1/4 32 1/2 7 1/2 30 1/2 35 1/2 375 mm 1118 1105 928 1207 22.3 394 2121 232 556 880 264 474 794 826 191 775 902

NOTES:

Cleveland Range reserves right of design improvement or modification, as warranted.

Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.

Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L/NSF#4 and CSA (AGA, CGA).

Shipping Weights & Dimensions

Model - KGL-40 Weight - 454 lbs

Width - 44” Depth - 44” Height - 54”

KGL-40 Weight - 510 lbs Width - 44” Depth - 44” Height - 54”

KGL-40 Weight - 597 lbs Width - 56” Depth - 55” Height - 59”

Christopher.J.Smith Highlight

Christopher.J.Smith Highlight

Christopher.J.Smith Highlight

Christopher.J.Smith Highlight